Search

In this study, the contents of both extraction liquid and pyrolysis liquid products of chestnut shells were characterized using Gas Chromatography-Mass Spectrometry (GCMS), Liquid Chromatography-Mass Spectrometry (LC/MS-MS) and Fourier Infrared Spectroscopy (FT-IR). In LC-MS/MS analyses; sample samples obtained from different processes were determined using 41 phenolic standards. The results of LC-MS/MS analysis showed that both the type and amount of phenolic compounds in the liquid extract were significantly higher than those in the pyrolysis liquid. According to the analysis results, very valuable phenolic compounds such as catechin (2526.96 µg/g extract), gallic acid (175.02 µg/g extract), protocatechuic acid (76.47 µg/g extract) were obtained in high amounts. FTIR analysis of the liquid samples obtained by two different processes was performed. GC-MS analysis revealed stearic acid methyl ester (28.78%), palmitic acid methyl ester (27.81%) and o-xylene (9.29%) in the liquid extract. However, higher amounts of linoleic acid, methyl ester (32.45%), palmitic acid methyl ester (23.06%) and linolenic acid, methyl ester oleic acid, methyl ester (11.32%) compounds were detected in the liquid extract obtained by pyrolysis compared to the normal liquid extract content. All these findings show that the processing method and physicochemical conditions are very important in obtaining valuable compounds such as phenolic and organic acids from plant products such as chestnut bark. [ABSTRACT FROM AUTHOR]

Copyright of Ataturk University Faculty of Medicine Journal of Surgical Medical Sciences is the property of Ataturk University Coordinatorship of Scientific Journals and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

PdRuO2/PVP nanomaterial was synthesized using a straightforward method and characterized using advanced analytical methods such as TEM, XRD, XPS, elemental mapping and SEM. The synthesized PdRuO2/PVP nanomaterial was used as an ionophore in potentiometric sensor electrodes and successfully adapted to Cr3+ ion detection in a large number of aqueous samples. Several experimental parameters of the PdRuO2/PVP sensor such as potentiometric behavior, selectivity, repeatability, response time, pH, titration, and recovery in real samples were investigated. Potentiometric behavioral characteristics were performed in the concentration range 1 × 10−6–1.0 × 10−1 M. The repeated experiments performed six times showed that there was no deviation in the measurements. The limit of detection of the PdRuO2/PVP potentiometric sensor was very low with a value of 8.6 × 10−8 M. The potentiometric measurements showed that the synthesized PdRuO2/PVP ionophore was highly effective in detecting Cr3+ in a wide pH range of 2.0–8.0 and was found to have a shelf life of over 1 year. As a result, the synthesized PdRuO2/PVP electrode material was found to be highly selective, stable, and applicable for Cr3+ detection. [ABSTRACT FROM AUTHOR]

In the present work, SnO2-Fe3O4@MWCNT nanocatalyst was fabricated according to a sonochemical-hydrothermal procedure. The surface morphology and structure analyses of the synthesized SnO2-Fe3O4@MWCNT were investigated by transmission electron microscope (TEM), X-ray diffraction (XRD), Raman spectroscopy, EDS, FTIR and BET analyses. The degradation efficiency of SnO2-Fe3O4@MWCNT nanocatalyst in MB solution was tested by several experimental conditions such as SnO2-Fe3O4@MWCNT dosage (8–20 mg/L), initial MB concentration (20–50 mg/L), initial solution pH (5–9), and ultrasonic output power (37–60 kHz). SnO2-Fe3O4@MWCNT nanocatalyst retained its efficiency as 85% at common experimental conditions of 16 mg/L of SnO2-Fe3O4@MWCNTs, 45 mg/L of MB, pH of 8, H2O2 of 15 mM, and 60 kHz in 60 min under ultrasonic irradiation. In addition, the optimum experiment conditions for SnO2-Fe3O4@MWCNTs in MB degradation were investigated. The experiment result showed that the degradation efficiency of MB was increased by adding H2O2 to the reaction medium due to forming more free radicals. Further, it was detected that OH• radicals were determined to be the dominant oxidative species in MB degradation using SnO2-Fe3O4@MWCNT catalyst. The reuse tests showed that SnO2-Fe3O4@MWCNT sonocatalyst preserved its very stable structure after using the same catalyst 5 times. The intermediates and by-products after MB degradation using the catalyst were indicated by GC–MS analysis. Overall the results showed that the SnO2-Fe3O4@MWCNT sonocatalyst has excellent potential for treating organic pollutants in wastewater. [ABSTRACT FROM AUTHOR]

Supercapacitors have gained great interest due to their high-power energy density, suitability for clean energy and energy storage applications. In this study, we used commercial multi-walled carbon nanotube (MWCNT), polypyrrole (PPy) and synthesized porous carbon (PC) from Astragalus brachycalyx plant as supporting materials to prepare Pt-NiOx/PPy-MWCNT and Pt-NiOx/PC electrodes by a straightforward method and tested their electrochemical properties for supercapacitor applications. X-ray diffractometer (XRD), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were employed to characterize synthesized electrodes. The XRD results confirmed the composition and crystalline structure of related materials in the Pt-NiOx/PPy-MWCNT and Pt-NiOx/PC electrodes. While the MWCNT supporting materials with PPy exhibited filled rod like structure, PC supporting materials showed porous surfaces according to SEM images. The EDS analysis approved chemical composition of the Pt-NiOx/PPy-MWCNT and Pt-NiOx/PC depending on their ingredients. Cyclic voltammetry (CV) measurements were used to characterize capacitor behaviors of the electrode materials in a Swagelok-type cell. The Pt-NiOx/PPy-MWCNT and Pt-NiOx/PC materials displayed 252.36 F/g and 390.97 F/g capacitance values, respectively. The electrochemical experiments revealed that the synthesized materials can be used as energy storage electrode materials for supercapacitor applications. [ABSTRACT FROM AUTHOR]

In this paper, we report the preparation of a new Fe3O4/SSIP/GO composite film for the purification of methylene blue dye from solution media. The preparation process of composite film was carried out to improve the interaction between the inner part of the sunflower stalk (SSIP) and surface matrix using magnetite/Graphene Oxide (Fe3O4/GO) minerals at weight ratios (0.2/4/0.2:w/w/w). The characterizations of as-developed Fe3O4/SSIP/GO composite film was successfully carried out by some advanced techniques such as FT-IR, SEM, and TGA analyses. Adsorption kinetic studies were evaluated in three different aspects as a pseudo-first-order model, pseudo-second-order model, and intraparticle diffusion-type model. Based on the R2 results, it was seen that the Pseudo-second order kinetic model (0.999) acted more harmoniously than the pseudo-first-order (0.960) and intra-particle diffusion technique models (0.974). In the light of these findings, it can be said that the prepared Fe3O4/SSIP/GO composite film used for removal of methylene blue dye can be considered as a promising material. [ABSTRACT FROM AUTHOR]

Copyright of Talim: Journal of Education in Muslim Societies & Communities is the property of Talim: Journal of Education in Muslim Societies & Communities and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)