Search

The morphology-dependent antibacterial activity of zinc oxide (ZnO) nanoparticles with three different morphologies, nanowall (NW), nanosphere (NS), and, nanorod (NR) was rigorously investigated to elucidate the influence of shape and size on their performance. Their morphological, surface, and structural characteristics were meticulously analyzed using SEM, BET, and XRD techniques. The antibacterial activity of synthesized ZnO samples was initially investigated and validated through in silico docking studies against nine bacterial strains, specifically targeting 1GCI, 2DCJ, 6KMM and 3T07, 6KVQ, 1MWT from gram-positive Bacillus sp. and Staphylococcus sp. respectively, 6N38, 6CRT, 6GRH from gram-negative E. coli. The docking simulations were performed using Autodock 4.2 software, yielding promising results characterized by negative binding energies, indicative of favorable interactions. The invitro studies were assessed against three same bacteria mentioned above using the disk diffusion method. The results demonstrated a pronounced dependency of antibacterial activity on the surface area, average crystallite size, and surface roughness of ZnO samples. ZnO (NW) exhibited markedly superior antibacterial properties. This enhanced efficacy is attributed to their higher surface area to volume ratio, smaller average crystallite size and increased surface roughness facilitating more efficient interactions with bacterial cell membranes. ZnO (NR) nanoparticles exhibited enhanced antibacterial activity despite minimal surface area., Competing Interests: Declaration of competing interest The authors declare that they have no financial and personal relationships with other people or organizations that could inappropriately influence or bias their work., (Copyright © 2024 Elsevier Inc. All rights reserved.)

DNA nanotubes with controllable geometries hold a wide range of interdisciplinary applications. When preparing DNA nanotubes of varying widths or distinct chirality, existing methods require repeatedly designing and synthesizing specific DNA sequences, which can be costly and laborious. Here, we proposed an intercalator-assisted DNA tile assembly method which enables the production of DNA nanotubes of diverse widths and chirality using identical DNA strands. Through adjusting the concentration of intercalators during assembly, the twisting direction and extent of DNA tiles could be modulated, leading to the formation of DNA nanotubes featuring controllable widths and chirality. Moreover, through introducing additional intercalators and secondary annealing, right-handed nanotubes could be reconfigured into distinct left-handed nanotubes. We expect that this method could be universally applied to modulating the self-assembly pathways of various DNA tiles and other chiral materials, advancing the landscape of DNA tile assembly.

The nucleolus, as a main "cellular stress receptor", is the hub of the stress response driving cancer development and has great research value in the field of organelle-targeting photothermal therapy. However, there are few studies focused on monitoring nucleolar stress response and revealing how the energy metabolism of cells regulates the nucleolar stress response during photothermal therapy. Herein, by designing a nucleolus-targeting and ATP- and photothermal-responsive plasmonic fluorescent nanoprobe (AuNRs-CDs) based on gold nanorods (AuNRs) and fluorescent carbon quantum dots (CDs), we achieved real-time fluorescence imaging of nucleus morphology while monitoring changes of ATP content at the subcellular level. We found that the green fluorescence diminished at 5 min of photothermal therapy, and the nucleolus morphology began to shrink and became smaller in cancerous HepG2 cells. In contrast, there is no significant change of green fluorescence in the nucleolar region of normal HL-7702 cells. ATP content monitoring also showed similar results. Apparently, in response to photothermal stimuli, cancerous cells produce more ATP (energy) along with obvious change in nucleolus morphology and state compared to normal cells under the hyperthermia-induced cell apoptosis. The developed AuNRs-CDs as a nucleolus imaging nanoprobe and effective photothermal agent present promising applications for nucleolar stress studies and targeted photothermal therapy.

Functional and versatile nano- and microassemblies formed by biological molecules are found at all levels of life, from cell organelles to full organisms. Understanding the chemical and physicochemical determinants guiding the formation of these assemblies is crucial not only to understand the biological processes they carry out but also to mimic nature. Among the synthetic peptides forming well-defined nanostructures, the octapeptide Lanreotide has been considered one of the best characterized, in terms of both the atomic structure and its self-assembly process. In the present work, we determined the atomic structure of Lanreotide nanotubes at 2.5-Å resolution by cryoelectron microscopy (cryo-EM). Surprisingly, the asymmetric unit in the nanotube contains eight copies of the peptide, forming two tetramers. There are thus eight different environments for the peptide, and eight different conformations in the nanotube. The structure built from the cryo-EM map is strikingly different from the molecular model, largely based on X-ray fiber diffraction, proposed 20 y ago. Comparison of the nanotube with a crystal structure at 0.83-Å resolution of a Lanreotide derivative highlights the polymorphism for this peptide family. This work shows once again that higher-order assemblies formed by even well-characterized small peptides are very difficult to predict., Competing Interests: The authors declare no competing interest., (Copyright © 2022 the Author(s). Published by PNAS.)

Irreparable DNA damage following ionizing radiation (IR) triggers prolonged DNA damage response and induces premature senescence. Cellular senescence is a permanent state of cell-cycle arrest characterized by chromatin restructuring, altered nuclear morphology and acquisition of secretory phenotype, which contributes to senescence-related inflammation. However, the mechanistic connections for radiation-induced DNA damage that trigger these senescence-associated hallmarks are poorly understood. In our in vitro model of radiation-induced senescence, mass spectrometry-based proteomics was combined with high-resolution imaging techniques to investigate the interrelations between altered chromatin compaction, nuclear envelope destabilization and nucleo-cytoplasmic chromatin blebbing. Our findings confirm the general pathophysiology of the senescence-response, with disruption of nuclear lamin organization leading to extensive chromatin restructuring and destabilization of the nuclear membrane with release of chromatin fragments into the cytosol, thereby activating cGAS-STING-dependent interferon signaling. By serial block-face scanning electron microscopy (SBF-SEM) whole-cell datasets were acquired to investigate the morphological organization of senescent fibroblasts. High-resolution 3-dimensional (3D) reconstruction of the complex nuclear shape allows us to precisely visualize the segregation of nuclear blebs from the main nucleus and their fusion with lysosomes. By multi-view 3D electron microscopy, we identified nanotubular channels formed in lamin-perturbed nuclei of senescent fibroblasts; the potential role of these nucleo-cytoplasmic nanotubes for expulsion of damaged chromatin has to be examined.

Herein we report synthesis of hematite (α-Fe 2 O 3 ) nanorods by calcinating hydrothermally synthesized goethite nanorods at 5000C. The structural, optical and MRI imaging guided cancer therapeutic properties of fabricated nanorods have been discussed in this manscript. FESEM and TEM imaging techniques were used to confirm the nanorod like morphology of as prepared materials. As we know that Fe 2 O 3 nanorods with size in the range of 25-30 nm exhibit super magnetism. After coating with the PEG, the as prepared nanorods can be used as T 2 MR imaging contrast agents. An excellent T 2 MRI contrast of 38.763 mM -1 s -1 achieved which is highest reported so far for α-Fe 2 O 3 . Besides the as prepared nanorods display an excellent photothermal conversion efficiency of 39.5% thus acts as an excellent photothermal therapeutic agent. Thus, we envision the idea of testing our nanorods for photothermal therapy and MR imaging application both in vitro and in vivo, achieving an excellent T 2 MRI contrast and photothermal therapy effect with as prepared PEGylated nanorods., (© 2021. The Author(s).)

Cancer progresses by evading the immune system. Elucidating diverse immune evasion strategies is a critical step in the search for next-generation immunotherapies for cancer. Here we report that cancer cells can hijack the mitochondria from immune cells via physical nanotubes. Mitochondria are essential for metabolism and activation of immune cells. By using field-emission scanning electron microscopy, fluorophore-tagged mitochondrial transfer tracing and metabolic quantification, we demonstrate that the nanotube-mediated transfer of mitochondria from immune cells to cancer cells metabolically empowers the cancer cells and depletes the immune cells. Inhibiting the nanotube assembly machinery significantly reduced mitochondrial transfer and prevented the depletion of immune cells. Combining a farnesyltransferase and geranylgeranyltransferase 1 inhibitor, namely, L-778123, which partially inhibited nanotube formation and mitochondrial transfer, with a programmed cell death protein 1 immune checkpoint inhibitor improved the antitumour outcomes in an aggressive immunocompetent breast cancer model. Nanotube-mediated mitochondrial hijacking can emerge as a novel target for developing next-generation immunotherapy agents for cancer., (© 2021. The Author(s), under exclusive licence to Springer Nature Limited.)

Osteoclasts are multinucleated cells formed through specific recognition and fusion of mononuclear osteoclast precursors derived from hematopoietic stem cells. Detailed cellular events concerning cell fusion in osteoclast differentiation remain ambiguous. Tunneling nanotubes (TNTs), actin-based membrane structures, play an important role in intercellular communication between cells. We have previously reported the presence of TNTs in the fusion process of osteoclastogenesis. Here we analyzed morphological details of TNTs using scanning electron microscopy. The osteoclast precursor cell line RAW-D was stimulated to form osteoclast-like cells, and morphological details in the appearance of TNTs were extensively analyzed. Osteoclast-like cells could be classified into three types; early osteoclast precursors, late osteoclast precursors, and multinucleated osteoclast-like cells based on the morphological characteristics. TNTs were frequently observed among these three types of cells. TNTs could be classified into thin, medium, and thick TNTs based on the diameter and length. The shapes of TNTs were dynamically changed from thin to thick. Among them, medium TNTs were often observed between two remote cells, in which side branches attached to the culture substrates and beaded bulge-like structures were often observed. Cell-cell interaction through TNTs contributed to cell migration and rapid transport of information between cells. TNTs were shown to be involved in cell-cell fusion between osteoclast precursors and multinucleated osteoclast-like cells, in which movement of membrane vesicles and nuclei was observed. Formation of TNTs was also confirmed in primary cultures of osteoclasts. Furthermore, we have successfully detected TNTs formed between osteoclasts observed in the bone destruction sites of arthritic rats. Thus, formation of TNTs may be important for the differentiation of osteoclasts both in vitro and in vivo. TNTs could be one target cellular structure for the regulation of osteoclast differentiation and function in bone diseases., (© 2021. The Author(s), under exclusive licence to United States and Canadian Academy of Pathology.)

Injectable hydrogels have been known as promising materials for the regeneration of irregular shape tissue defects. In this study, novel thermosensitive methylcellulose (MC) hydrogels containing bassorin (Ba) and halloysite nanotubes (HNTs) have been developed for application in bone tissue engineering. Bassorin isolated from gum tragacanth (GT) with the concentration of 0.25-1.5 w/v% was blended with MC. The best MC/Ba gel (containing 0.5% bassorin) was chosen based on the results of injectability and rheological tests. HNTs (1-7%) were added to this formulation and tested for the physicochemical, mechanical, rheological, degradation, swelling, and biological properties. In vitro biological evaluations including cell proliferation (by MTT assay), cell attachment (by SEM), osteogenic activity (by Alizarin Red staining and alkaline phosphatase assay), and osteogenic gene expression (by quantitative real-time polymerase chain reaction) were done using MG-63 cells. Results showed that bassorin led to the increased gel-forming ability (at a lower temperature) and mechanical properties of MC hydrogel. The presence of HNTs and bassorin affected the degradation rate and swelling degree of MC-based hydrogel. Results showed significant enhancement in cell proliferation, differentiation, and mineralization, as well as higher bone-specific gene expression of the cell on bassorin and HNTs incorporated MC compared to pure MC hydrogel., (Copyright © 2021. Published by Elsevier B.V.)

Tunneling nanotubes (TNTs) are F-actin-based, membrane-enclosed tubular connections between animal cells that transport a variety of cellular cargo. Over the last 15 years since their discovery, TNTs have come to be recognized as key players in normal cell communication and organism development, and are also exploited for the spread of various microbial pathogens and major diseases like cancer and neurodegenerative disorders. TNTs have also been proposed as modalities for disseminating therapeutic drugs between cells. Despite the rapidly expanding and wide-ranging relevance of these structures in both health and disease, there is a glaring dearth of molecular mechanistic knowledge regarding the formation and function of these important but enigmatic structures. A series of fundamental steps are essential for the formation of functional nanotubes. The spatiotemporally controlled and directed modulation of cortical actin dynamics would be required to ensure outward F-actin polymerization. Local plasma membrane deformation to impart negative curvature and membrane addition at a rate commensurate with F-actin polymerization would enable outward TNT elongation. Extrinsic tactic cues, along with cognate intrinsic signaling, would be required to guide and stabilize the elongating TNT towards its intended target, followed by membrane fusion to create a functional TNT. Selected cargoes must be transported between connected cells through the action of molecular motors, before the TNT is retracted or destroyed. This review summarizes the current understanding of the molecular mechanisms regulating these steps, also highlighting areas that deserve future attention., (© 2021 The Author(s). Published by Portland Press Limited on behalf of the Biochemical Society.)

A general and effective strategy was developed for improving simultaneously the mechanical strength and antibacterial performance of biopolymer-based films. The well-dispersed zinc oxide (ZnO) nanoparticles were in-situ loaded on non-toxic natural palygorskite (PAL) nanorod to form an antibacterial PAL@ZnO composite nanorod, which can be embedded into chitosan/gelatin (CS/GL) film to produce the composite films with noticeably enhanced mechanical properties and antibacterial activity against S. aureus and E. coli bacteria (inhibition zones are 21.82 ± 0.95 mm and 16.36 ± 1.64 mm, respectively). The toughness of films enhances to 35.13 ± 0.95 MPa and the moisture uptake decreases to 23.74 ± 0.02% after embedding 3% and 9% of PAL@ZnO, respectively. In addition, incorporating PAL@ZnO nanorods also significantly enhanced the water resistance, and thermal stability of film. This work provides an alternative way for the development of antibacterial films with potential applications in many fields such as food packing., (Copyright © 2021 Elsevier B.V. All rights reserved.)

For immobilization and signal amplification of the probes, it is feasible and promising by using porous nanomaterials as nanocarriers. Herein, a novel label-free electrochemical immmunosensor was efficiently designed for ultrasensitive detection of procalcitonin (PCT). The immunosensor was prepared by using porous silica-coated gold nanorods (Au NRs@m-SiO 2 ) to load electroactive dye thionine (Thi) on the electrode surface. Apart from the improved electrical conductivity, the porous feature highly increased the loading amount of Thi to boost the detection signals, while the good biocompatibility and protective microenvironment are beneficial to the largely improved stability for the target. For quantification of PCT, the developed immunosensor exhibited a good linear relationship in the antigen concentration range of 0.001-100 ng mL -1 with an ultra-low limit of detection (LOD, 0.39 pg mL -1 , S/N = 3). Moreover, the built platform was successfully applied to such assay in human serum samples. The research provides some valuable guidelines for clinical screening and diagnosis of other biomarkers., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Creating artificial macromolecular transport systems that can support the movement of molecules along defined routes is a key goal of nanotechnology. Here, we report the bottom-up construction of a macromolecular transport system in which molecular pistons diffusively move through micrometer-long, hollow filaments. The pistons can cover micrometer distances in fractions of seconds. We build the system using multi-layer DNA origami and analyze the structures of the components using transmission electron microscopy. We study the motion of the pistons along the tubes using single-molecule fluorescence microscopy and perform Langevin simulations to reveal details of the free energy surface that directs the motions of the pistons. The tubular transport system achieves diffusivities and displacement ranges known from natural molecular motors and realizes mobility improvements over five orders of magnitude compared to previous artificial random walker designs. Electric fields can also be employed to actively pull the pistons along the filaments, thereby realizing a nanoscale electric rail system. Our system presents a platform for artificial motors that move autonomously driven by chemical fuels and for performing nanotribology studies, and it could form a basis for future molecular transportation networks., (© 2021. The Author(s).)

The fabrication of sensitive protein microarrays such as PCR used in DNA microarray is challenging due to lack of signal amplification. The development of microarrays is utilized to improve the sensitivity and limitations of detection towards primal cancer detection. The sensitivity is enhanced by the use of ZnO-nanorods and is investigated as a substrate which enhance the florescent signal to diagnose the hepatocellular carcinoma (HCC) at early stages. The substrate for deposition of ZnO-nanorods is prepared by the conventional chemical bath deposition method. The resultant highly dense ZnO-nanorods enhance the fluorescent signal 7.2 times as compared to the substrate without ZnO-nanorods. The microarray showed sensitivity of 1504.7 ng ml -1 and limit of detection of 0.1 pg ml -1 in wide dynamic range of 0.05 pg-10  μ g ml -1 for alpha fetoprotein (AFP) detection in 10% human serum. This immunoassay was successfully applied for human serum samples to detect tumor marker with good recoveries. The ZnO-nanorod substrate is a simple protein microarray which showed a great promise for developing a low-cost, sensitive, and high-throughput protein assay platform for several applications in both fundamental research and clinical diagnosis., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2021 Saima Rafique et al.)

The entire route from anodic oxidation and surface characterization, including in vitro experiments and finally in vivo osseointegration assays were performed with the aim to evaluate nanotubular and crystalline annealed titanium oxides as a suitable surface for grade 2 titanium permanent implants. Polished titanium (T0) was compared with anodized surfaces obtained in acidic media with fluoride, leading to an ordered nanotubular structure of titanium oxide on the metal surface, characterized by tube diameter of 89 ± 24 nm (Tnts). Samples were thermally treated in air (TntsTT) to increase the anatase crystalline phase on nanotubes, with minor alteration of the structure. Corrosion tests were performed to evaluate the electrochemical response after 1, 14, and 28 days of immersion in simulated body fluid. Based on the in vitro results, heat-treated titanium nanotubes (TntsTT) were selected as a promissory candidate to continue with the osseointegration in vivo assays. The in vivo results showed no major improvement in the osseointegration process when compared with untreated Ti after 30 days of implantation and there also was a lower increase in the development of new osseous tissue., (© 2020 Wiley Periodicals LLC.)

Layered molybdenum diselenide (MoSe 2 ) nanosheets were formed by the weak Van der Waals forces of attraction between Se and Mo atoms. MoSe 2 has a larger space between the adjacent layers and smaller band gaps in the range of 0.85 to ~ 1.6 eV. In this study, MoSe 2 nanosheets decorated nickel oxide (NiO) nanorods have been synthesized by hydrothermal method using sodium molybdate and selenium metal powder. NiO/MoSe 2 composite formation was confirmed by powder X-ray diffraction analysis. In addition, the presence of MoSe 2 nanosheets on NiO nanorods were confirmed by field emission scanning electron microscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy. The Nyquist plots of NiO/MoSe 2 coated glassy carbon electrode (GCE) was indicated that it had lower charge transfer resistance compared to NiO/GCE and MoSe 2 /GCE. Furthermore, as-prepared NiO/MoSe 2 /GCE was used to detect glucose in alkaline solution by cyclic voltammetry and amperometry techniques. The NiO/MoSe 2 /GCE was exhibited a linear response for the oxidation of glucose from 50 µM to 15.5 mM (R 2  = 0.9842) at 0.5 V by amperometry. The sensor response time and the limit of detection were found to be 2 s and 0.6 µM for glucose. Moreover, selectivity of the NiO/MoSe 2 sensor was tested in the presence of common interferent molecules such as hydrogen peroxide, fructose, lactose, ascorbic acid, uric acid, and dopamine. It was found that NiO/MoSe 2 /GCE did not respond to these interfering biomolecules. In addition, NiO/MoSe 2 /GCE had shown high stability, reproducibility and repeatability. Finally, the practical application of the sensor was demonstrated by detecting glucose in human blood serum with the acceptable recovery.

Spatial light modulators have become an essential tool for advanced microscopy, enabling breakthroughs in 3D, phase, and super-resolution imaging. However, continuous spatial-light modulation that is capable of capturing sub-millisecond microscopic motion without diffraction artifacts and polarization dependence is challenging. Here we present a photothermal spatial light modulator (PT-SLM) enabling fast phase imaging for nanoscopic 3D reconstruction. The PT-SLM can generate a step-like wavefront change, free of diffraction artifacts, with a high transmittance and a modulation efficiency independent of light polarization. We achieve a phase-shift > π and a response time as short as 70 µs with a theoretical limit in the sub microsecond range. We used the PT-SLM to perform quantitative phase imaging of sub-diffractional species to decipher the 3D nanoscopic displacement of microtubules and study the trajectory of a diffusive microtubule-associated protein, providing insights into the mechanism of protein navigation through a complex microtubule network.

Objective: Gold nanorods (AuNRs) show great potential for versatile biomedical applications, such as stem cell therapy and bone tissue engineering. However, as an indispensable shape-directing agent for the growth of AuNRs, cetyltrimethylammonium bromide (CTAB) is not optimal for biological studies because it forms a cytotoxic bilayer on the AuNR surface, which interferes with the interactions with biological cells., Methods: Citrate-stabilized AuNRs with various aspect-ratios (Cit-NRI, Cit-NRII, and Cit-NRIII) were prepared by the combination of end-selective etching and poly(sodium 4-styrenesulfonate)-assisted ligand exchange method. Their effects on osteogenic differentiation of the pre-osteoblastic cell line (MC3T3-E1), rat bone marrow mesenchymal stem cells (rBMSCs), and human periodontal ligament progenitor cells (PDLPs) have been investigated. Potential signaling pathway of citrate-stabilized AuNRs-induced osteogenic effects was also investigated., Results: The experimental results showed that citrate-stabilized AuNRs have superior biocompatibility and undergo aspect-ratio-dependent osteogenic differentiation via expression of osteogenic marker genes, alkaline phosphatase (ALP) activity and formation of mineralized nodule. Furthermore, Wnt/β-catenin signaling pathway might provide a potential explanation for the citrate-stabilized AuNRs-mediated osteogenic differentiation., Conclusion: These findings revealed that citrate-stabilized AuNRs with great biocompatibility could regulate the osteogenic differentiation of multiple cell types through Wnt/β-catenin signaling pathway, which promote innovative AuNRs in the field of tissue engineering and other biomedical applications., Competing Interests: The authors report no conflicts of interest for this work., (© 2021 Zhang et al.)

Photoacoustic (PA) imaging holds great promise as a noninvasive imaging modality. Gold nanorods (GNRs) with absorption in the second near-infrared (NIR-II) window have emerged as excellent PA probes because of their tunable optical absorption, surface modifiability, and low toxicity. However, pristine GNRs often undergo shape transition upon laser illumination due to thermodynamic instability, leading to a reduced PA signal after a few seconds of imaging. Here, we report monodisperse GNR-melanin nanohybrids where a tunable polydopamine (PDA) coating was conformally coated on GNRs. GNR@PDAs showed a threefold higher PA signal than pristine GNRs due to the increased optical absorption, cross-sectional area, and thermal confinement. More importantly, the PA signal of GNR@PDAs only decreased by 29% during the 5 min of laser illumination in the NIR-II window, while significant attenuation (77%) was observed for GNRs. The GNR@PDAs maintained 87% of its original PA signal in vivo even after 10 min of laser illumination. This PDA-enabled strategy affords a rational design for robust PA imaging probes and provides more opportunities for other types of photomediated biomedicines, such as photothermal and photodynamic regimens.

Effective isolation and removal of target tumor cells from patients' peripheral blood are of great importance to clinical prognosis and recovery. However, the extremely low quantity of target cells in peripheral blood becomes one of the challenges in this respect. Herein, we design and synthesize an innovative nanostructure based on magnetic TiO 2 nanotubes with Pt nanoparticles' asymmetrical decoration for effectively capturing and inactivating target cells. Using CCRF-CEM as the model cell, the resulting nanotubes with accurate modification of recognition probes exhibit high selectivity and cell-isolation efficiency upon real blood samples. Particularly, the target cells are selectively captured at a low concentration with a recovery rate of 73.0 ± 11.5% at five cells per milliliter for whole blood samples. Consequently, benefitting from the remarkable photocatalytic activity of the Janus nanotubes, these isolated cells can be rapidly inactivated via light-emitting diode (LED) irradiation with an ignorable effect on normal cells. This work offers a new paradigm for high-efficient isolating/killing target cells from a complex medium.

As a model radio-photodynamic therapy (RPDT) agent, we developed a multicomponent nanomaterial by anchoring conjugated chromophores on the surface of scintillating chrysotile nanotubes. Its ultimate composition makes the system a scintillation-activated photosensitizer for the singlet oxygen production. This nanomaterial shows a remarkable ability to enhance the production of singlet oxygen in an aqueous environment, under X-ray irradiation, boosting its production by almost 1 order of magnitude. Its efficiency as a coadjutant for radiotherapy has been tested in vitro , showing a striking efficacy in enhancing both the prompt cytotoxicity of the ionizing radiation and the long-term cytotoxicity given by radiation-activated apoptosis. Notably, the beneficial activity of the RPDT agent is prominent at low levels of delivered doses comparable to the one employed in clinical treatments. This opens the possibility of effectively reducing the therapy exposure and consequently undesired collateral effects due to prolonged exposure of patients to high-energy radiation.

Introduction: In this paper, we have designed and formulated, a novel synthesis of doxorubicin (DOX) loaded bimetallic gold nanorods in which gold salt (HAuCl 4 ) is chelated with anthracycline (DOX), diacid polyethylene-glycol (PEG-COOH) and gadolinium salt (GdCl 3 * 6 H 2 O) to form DOX IN-Gd-AuNRs compared with DOX ON-Gd-AuNRs in which the drug was grafted onto the bimetallic pegylated nanoparticle surface by electrostatic adsorption., Material and Method: The physical and chemical evaluation was performed by spectroscopic analytical techniques (Raman spectroscopy, UV-Visible and transmission electron microscopy (TEM)). Magnetic features at 7T were also measured. Photothermal abilities were assessed. Cytotoxicity studies on MIA PaCa-2, human pancreatic carcinoma and TIB-75 hepatocytes cell lines were carried out to evaluate their biocompatibility and showed a 320 fold higher efficiency for DOX after encapsulation., Results: Exhaustive physicochemical characterization studies were conducted showing a mid size of 20 to 40 nm diameters obtained with low polydispersity, efficient synthesis using seed mediated synthesis with chelation reaction with high scale-up, long duration stability, specific doxorubicin release with acidic pH, strong photothermal abilities at 808 nm in the NIR transparency window, strong magnetic r 1 relaxivities for positive MRI, well adapted for image guided therapy and therapeutical purpose in biological tissues., Conclusion: In this paper, we have developed a novel theranostic nanoparticle composed of gadolinium complexes to gold ions, with a PEG biopolymer matrix conjugated with antitumoral doxorubicin, providing multifunctional therapeutic features. Particularly, these nano conjugates enhanced the cytotoxicity toward tumoral MIAPaCa-2 cells by a factor of 320 compared to doxorubicin alone. Moreover, MRI T 1 features at 7T enables interesting positive contrast for bioimaging and their adapted size for potential passive targeting to tumors by Enhanced Permeability Retention. Given these encouraging antitumoral and imaging properties, this bimetallic theranostic nanomaterial system represents a veritable promise as a therapeutic entity in the field of medicinal applications., Competing Interests: The authors report no conflicts of interest in this work., (© 2021 Khan et al.)

Nanotubular connections between mammalian cell types came into the focus only two decades ago, when "live cell super-resolution imaging" was introduced. Observations of these long-time overlooked structures led to understanding mechanisms of their growth/withdrawal and exploring some key genetic and signaling factors behind their formation. Unbelievable level of multiple supportive collaboration between tumor cells undergoing cytotoxic chemotherapy, cross-feeding" between independent bacterial strains or "cross-dressing" collaboration of immune cells promoting cellular immune response, all via nanotubes, have been explored recently. Key factors and "calling signals" determining the spatial directionality of their growth and their overall in vivo significance, however, still remained debated. Interestingly, prokaryotes, including even ancient archaebacteria, also seem to use such NT connections for intercellular communication. Herein, we will give a brief overview of current knowledge of membrane nanotubes and depict a simple model about their possible "historical role"., (© 2021. The Author(s).)

Hydroxyapatite (HA) is the main inorganic mineral that constitutes bone matrix and represents the most used biomaterial for bone regeneration. Over the years, it has been demonstrated that HA exhibits good biocompatibility, osteoconductivity, and osteoinductivity both in vitro and in vivo, and can be prepared by synthetic and natural sources via easy fabrication strategies. However, its low antibacterial property and its fragile nature restricts its usage for bone graft applications. In this study we functionalized a MgHA scaffold with gold nanorods (AuNRs) and evaluated its antibacterial effect against S. aureus and E. coli in both suspension and adhesion and its cytotoxicity over time (1 to 24 days). Results show that the AuNRs nano-functionalization improves the antibacterial activity with 100% bacterial reduction after 24 h. The toxicity study, however, indicates a 4.38-fold cell number decrease at 24 days. Although further optimization on nano-functionalization process are needed for cytotoxicity, these data indicated that Au-NRs nano-functionalization is a very promising method for improving the antibacterial properties of HA.

Actin-based tunneling nanotubes are a means of intercellular communication between remote cells. In the last decade, this type of nanotube was described in a wide variety of cell types and it became widely accepted that communication through these nanotubes is related to response to environmental changes. Few reports, however, are available regarding the expression of similar nanotubes in vivo or in primary cells. Moreover, the functional significance of this intercellular communication for health and disease is largely unknown. In this context, and as a first step in unraveling these questions, we examined the formation of similar nanotubes in primary peripheral human monocytes. To that end, we combined the use of a live cell imaging system along with advanced methods of fluorescent and scanning electron microscopy. This experimental approach reveals for the first time that the bacterial lipopolysaccharide endotoxin induces a transient expression of an unexpected abundance of actin-based tunneling nanotubes associated with vesicles. In addition, it was found that a similar response can be achieved by treating human monocytes with various bacterial and yeast membrane components, as well as with a viral component analog. In all these cases, this response is mediated by distinct complexes of toll-like receptors. Therefore, we suggest that the observed phenomena are related to a broad type of monocyte pathogen response, and raise the possibility that the phenomena described above may be involved in many clinical situations related to inflammation as a new topic of study., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Shahar, Szalat and Rosen.)

This paper presents a facile and low-cost strategy for fabrication lysozyme-loaded mesoporous silica nanotubes (MSNTs) by using silk fibroin (SF) nanofiber templates. The "top-down method" was adopted to dissolve degummed silk in CaCl 2 / formic acid (FA) solvent, and the solution containing SF nanofibrils was used for electrospinning to prepare SF nanofiber templates. As SF contains a large number of -OH, -NH 2 and -COOH groups, the silica layer could be easily formed on its surface by the Söber sol-gel method without adding any surfactant or coupling agent. After calcination, the MSNTs were obtained with inner diameters about 200 nm, the wall thickness ranges from 37 ± 2 nm to 66 ± 3 nm and the Brunauer-Emmett-Teller (BET) specific surface area was up to 200.48 m 2 /g, the pore volume was 1.109 cm 3 /g. By loading lysozyme, the MSNTs exhibited relatively high drug encapsulation efficiency up to 31.82% and an excellent long-term sustained release in 360 h (15 days). These results suggest that the MSNTs with the hierarchical structure of mesoporous and macroporous will be a promising carrier for applications in biomacromolecular drug delivery systems.

Designing multifunctional surfaces is key to develop advanced materials for orthopedic applications. In this study, we design a double-layer coating, assembled onto the completely regular titania nanotubes (cRTNT) array. Benefiting from the biological and topological characteristics of chitosan nanofibers (CH) and reduced graphene oxide (RGO) through a unique assembly, the designed material features promoted osteoblast cell viability, prolonged antibiotic release profile, as well as inhibited bacterial biofilm formation. The synergistic effect of RGO and CH on the biological performance of the surface is investigatSed. The unique morphology of the nanofibers leads to the partial coverage of RGO-modified nanotubes, providing an opportunity to access the sublayer properties. Another merit of this coating lies in its morphological similarity to the extracellular matrix (ECM) to boost cellular performance. According to the results of this study, this platform holds promising advantages over the bare and bulk biopolymer-modified TNTs., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A novel ratiometric electrochemical (EC) sensing platform was established for sensitive immunoassay of target cytokeratin 19 fragment 21-1 (CYFRA21-1) biomarker by combining competitive immunoreaction and multisignal output. This immunosensor utilized Ag nanoparticles (NPs)-functionalized urchin-like Fe 3 O 4 @polydopamine (u-Fe 3 O 4 @PDA-Ag) as a matrix to immobilize CYFRA21-1 antigens and methylene blue (MB)-absorbed Ni 3 Si 2 O 5 (OH) 4 -Au nanotubes (NTs) to label the anti-CYFRA21-1 (Ab). During the competitive immunoreaction, square wave voltammetric (SWV) current changes of Ag NPs from u-Fe 3 O 4 @PDA-Ag indicator and MB from Ni 3 Si 2 O 5 (OH) 4 -Au/MB indicator are relevant to the dosage of CYFRA21-1-acquired Ni 3 Si 2 O 5 (OH) 4 -Au/MB/Ab. More importantly, numerous CYFRA21-1 loaded stably on u-Fe 3 O 4 @PDA-Ag exhibited strong competitive capacity toward the target-CYFRA21-1 to combine Ni 3 Si 2 O 5 (OH) 4 -Au/MB/Ab, causing sensitive changes in the ratio of two measured SWV currents. Prominently, "Δ I = Δ I MB + |Δ I Ag NPs |" (Δ I MB and |Δ I Ag NPs | represents the change values of the oxidation peak currents of MB and Ag NPs, respectively) could be regarded as significantly amplifying the signal response and ultimately improving the sensitivity of CYFRA21-1 detection, from which we derived a wide dynamic range from 500 fg/mL to 50 ng/mL and a low detection limit of 0.39 pg/mL (S/N = 3). This work may exert a profound impact on monitoring other biomarkers in early diagnosis of diseases.

Drug release systems co-encapusulated with ammonium bicarbonate (ABC) could facilitate drug release upon acidic or thermal stimulations to improve therapeutic effect. However, it is not easy to control drug release rate, owing to relative stable temperature and acidic condition in living body. Besides, the additional loaded ABC reduces drug loading capacity. Herein, a near-infrared light triggered rapid drug release system with high loading capacity was developed by loading ABC and doxorubicin into yolk-shell structured Au nanorods@mesoporous silica. Gas bubbles were generated from the thermolysis of ABC utilizing photothermal effect of Au nanorods to extrude drug molecules. The mesoporous silica shell was finally destroyed along with growing bubbles, resulting in burst drug release. The photothermal therapeutic effect of Au nanorods also contributed in tumor treatment. The excellent therapeutic effect was demonstrated in cancer cells and tumor-bearing mice, which provides a new reference to achieve controllable rapid drug release in cancer medicine., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Background: Nanostructured surface modifications of Ti-based biomaterials are moving up from a highly-promising to a successfully-implemented approach to developing safe and reliable implants., Methods: The study's main objective is to help consolidate the knowledge and identify the more suitable experimental strategies related to TiO 2 nanotubes-modified surfaces. In this sense, it proposes the thorough investigation of two optimized nanotubes morphologies in terms of their biological activity (cell cytotoxicity, alkaline phosphatase activity, alizarin red mineralization test, and cellular adhesion) and their electrochemical behavior in simulated body fluid (SBF) electrolyte. Layers of small-short and large-long nanotubes were prepared and investigated in their amorphous and crystallized states and compared to non-anodized samples., Results: Results show that much more than the surface area development associated with the nanotubes' growth; it is the heat treatment-induced change from amorphous to crystalline anatase-rutile structures that ensure enhanced biological activity coupled to high corrosion resistance., Conclusion: Compared to both non-anodized and amorphous nanotubes layers, the crystallized nano-structures' outstanding bioactivity was related to the remarkable increase in their hydrophilic behavior, while the enhanced electrochemical stability was ascribed to the thickening of the dense rutile barrier layer at the Ti surface beneath the nanotubes., Competing Interests: The authors report no conflicts of interest related to this work., (© 2021 Nogueira et al.)

Nano titanium implants induce osteogenesis, but how osteoblasts respond to this physical stimulation remains unclear. In this study, we tried to reveal the role of the mitochondrial fission-fusion of osteoblasts in response to a nano titanium surface during the process of osteogenesis, which is important for the design of the surface structure of titanium implants. A TiO 2 nanotube array (nano titanium, NT) was fabricated by anodization, and a smooth surface (smooth titanium, ST) was used as a control. We investigated changes in the mitochondrial fission-fusion (MFF) dynamics in MC3T3-E1 cells on the NT surface with those on the ST surface by performing transmission electron microscopy (TEM), confocal laser scanning microscope (CLSM) and real-time PCR. At the same time, we also detected changes in the MFF and osteogenic differentiation of MC3T3-E1 cells after DRP1 downregulation with RNA interference. Cells on the NT surface exhibited more mitochondrial fusion than those on the ST surface, and DRP1 was the key regulatory molecule. Interestingly, DRP1 increased for only a short time at the early stage on the NT surface, and when DRP1 was inhibited by siRNA at the early stage, the osteogenic differentiation of MC3T3-E1 cells significantly decreased. In conclusion, DRP1-regulated mitochondrial dynamics played a key role in the nanotopography-accelerated osteogenic differentiation of MC3T3-E1 cells., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2020 Elsevier Inc. All rights reserved.)

To increase the efficiency of therapy via enhancing its selectivity, the usage of gold nanorods (GNR) as a factor sensitizing cancer cells to radiation was proposed. Due to gold nanoparticles' characteristics, the smaller doses of radiation would be sufficient in the treatment, protecting the healthy tissue around the tumor. The aim of this study was to investigate the effect of gold nanorods on cancer and normal prostate cells and the role of nanorods in the cell response to ionizing radiation. The effect was evaluated by measuring the toxicity, cell cycle, cell granularity, reactive oxygen species (ROS) level, and survival fractions. Nanorods showed a strong toxicity dependent on the concentration and incubation time toward all used cell lines. A slight effect of nanorods on the cycle distribution was observed. The results demonstrated that the administration of nanorods at higher concentrations resulted in an increased level of generated radicals. The results of cellular proliferation after irradiation are ambiguous; however, there are noticeable differences after the application of nanorods before irradiation. The obtained results lead to the conclusion that nanorods affect the physiology of both normal and cancer cells. Nanorods might become a potential tool used to increase the effectiveness of radiation treatment.

Micro/nano-topography (MNT) can promote osteogenic differentiation of stem cells, but the mechanism of topographical signaling transduction remains unclear. We have confirmed MNT, as a stressor, triggers endoplasmic reticulum (ER) stress and activates unfolded protein response in rat bone marrow mesenchymal stem cells, and such topography-induced ER stress promotes osteogenic differentiation. In order to reveal the influence of nanotube dimensions on ER stress, MNTs containing vertically oriented TiO 2 nanotubes of diameters ranging from 30 nm to 100 nm were fabricated on pure titanium (Ti) foils, and ER stress and osteogenic differentiation of cells were systematically studied. After 12 h of cultivation, the transmission electron microscopy showed that cells on MNTs presented gross distortions of rough ER morphology containing the electron-dense material, and the expansion of the ER lumen became more pronounced as the dimension of nanotubes increased. Additionally, PCR and western blotting showed that the ER stress-related gene, the ER chaperone 78 kDa glucose-regulated protein, also known as binding-immunoglobulin protein (GRP78/BiP), was up-regulated, which was consistent with the osteogenesis-inducing ability of MNTs. Based on our previous studies, the findings in this article further revealed the mechanism for topographical cues modulating osteogenic differentiation of cells, which may provide an innovative approach for the optimal design of implant surface topography.

Polypyrrole one-dimensional nanostructures (nanotubes, nanobelts and nanofibers) were prepared using three various dyes (Methyl Orange, Methylene Blue and Eriochrome Black T). Their high electrical conductivity (from 17.1 to 60.9 S cm -1 ), good thermal stability (in the range from 25 to 150 °C) and resistivity against ageing (half-time of electrical conductivity around 80 days and better) were used in preparation of lightweight and flexible composites with silicone for electromagnetic interference shielding in the C-band region (5.85-8.2 GHz). The nanostructures' morphology and chemical structure were characterized by scanning electron microscopy, Brunauer-Emmett-Teller specific surface measurement and attenuated total reflection Fourier-transform infrared spectroscopy. DC electrical conductivity was measured using the Van der Pauw method. Complex permittivity and AC electrical conductivity of respective silicone composites were calculated from the measured scattering parameters. The relationships between structure, electrical properties and shielding efficiency were studied. It was found that 2 mm-thick silicone composites of polypyrrole nanotubes and nanobelts shield almost 80% of incident radiation in the C-band at very low loading of conductive filler in the silicone (5% w/w ). Resulting lightweight and flexible polypyrrole composites exhibit promising properties for shielding of electromagnetic interference in sensitive biological and electronic systems.

To enhance the efficacy of nanoparticle-based cancer therapy with reduced side effects and promote its clinical translation, a biocompatible nanocomposite based on mesoporous silica-coated gold nanorods (AuNR@MSN) for triple tumor therapy is reported in this study. The gold core served as a hyperthermia agent, while the MSN shell acted as a reservoir of chemotherapeutics owing to its excellent loading capacity. Cytochrome c with the apoptosis inducing function was anchored on the surface of AuNR@MSN to prevent drug leakage through redox-responsive disulfide bonds. The successful construction of a nanocomposite was confirmed by characterization of the physicochemical properties. In vitro and in vivo studies demonstrated that the nanocomposite displayed an optimizing anti-tumor effect with a synergistic strategy of excellent photothermal therapy, chemotherapy and protein therapy. Therefore, this cooperative strategy paves the way for high-efficiency oncotherapy with reduced side effects.

Migration and differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) is an important biological process in tissue regeneration. Nanostructured titanium materials are believed to play a fundamental role in dental and orthopedic applications. However, the protein adsorption on nanostructured titanium materials and its correlation with the subsequent cell behaviors have not been studied. In this work, the titania nanotube arrays with different tubular diameters ranging from 27.3 to 88.2 nm were fabricated by using an electrochemical etching method. The adsorbed amounts and types of cell adhesion-related proteins (such as fibronectin, vitronectin, and laminin) from serum were investigated, revealing that these proteins were preferred to bind onto the surface with nanotubes of a smaller diameter. Adhesion and migration of BMSCs were studied as a function of different nanotube diameters in the presence or absence of serum proteins. Compared with the nanotube surface with a larger tubular diameter (88.2 nm), the surface with a smaller one could better support BMSCs in terms of adhesion and spreading. The pre-adsorbed serum proteins significantly enhanced adhesion and migration abilities of BMSCs. However, the adequate interactions between cells and serum proteins on the nanotubes surface with smallest nanotubes in diameter weakened cell mobility. Arrangement of cytoskeleton and expressions of key genes and proteins were studied, revealing that the nanostructured surfaces and pre-adsorbed proteins jointly mediated the adhesion and migration of BMSCs., (© 2020 Wiley Periodicals, Inc.)

Fluorescent nanoparticles based on 9,10-distyrylanthracene (DSA) derivatives (4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))bis(N,N-dimethylaniline) (NDSA) and 4,4'-((1E,1'E)-anthracene-9,10-diylbis(ethene-2,1-diyl))dibenzonitrile (CNDSA)) were prepared using an ultrasound aided nanoprecipitation method. The morphologies of the fluorescent nanoparticles could be controlled by adjusting the external ultrasonication time. NDSA or CNDSA could form spherical nanodots (NDSA NDs, CNDSA NDs) in a THF-H2O mixture with an 80% or 70% water fraction when the ultrasonication time was 30 s. When the ultrasonication time was prolonged to 10 min, NDSA and CNDSA could assemble into nanorods (NDSA NRs, CNDSA NRs). Meanwhile, the sizes of NDSA NRs and CNDSA NRs could be controlled by adjusting the water content in the mixture. As the water fraction was increased from 60% to 80%, the sizes of NDSA and CNDSA nanorods or nanodots reduced from 238.4 nm to 140.3 nm, and 482 nm to 198.4 nm, respectively. When the water fraction was up to 90%, irregular morphologies of NDSA and CNDSA could be observed. The nanoparticles exhibited intense fluorescence emission, good anti-photobleaching properties, as well as excellent stability and biocompatibility. In vitro cell imaging experiments indicated that the nanorods prepared by this simple method had the potential to be used for efficient and noninvasive long-term bioimaging.

Pseudomonas aeruginosa is a bacterium of high clinical and biotechnological importance thanks to its high adaptability to environmental conditions. The increasing incidence of antibiotic-resistant strains has created a need for alternative methods to increase the chance of recovery in infected patients. Various nanomaterials have the potential to be used for this purpose. Therefore, we aimed to study the physiological response of P. aeruginosa PAO1 to titanium dioxide/silica nanotubes. The results suggest that UV light-irradiated nanomaterial triggers strong agglomeration in the studied bacteria that was confirmed by microscopy, spectrophotometry, and flow cytometry. The effect was diminished when the nanomaterial was applied without initial irradiation, with UV light indicating that the creation of reactive oxygen species could play a role in this phenomenon. The nanocomposite also affected biofilm formation ability. Even though the biomass of biofilms was comparable, the viability of cells in biofilms was upregulated in 48-hour biofilms. Furthermore, from six selected genes, the mexA coding efflux pump was upregulated, which could be associated with an interaction with TiO 2 . The results show that titanium dioxide/silica nanotubes may alter the physiological and metabolic functions of P. aeruginosa PAO1.

Tunneling nanotubes (TNTs) are F-actin rich structures that connect distant cells, allowing the transport of many cellular components, including vesicles, organelles and molecules. Rab GTPases are the major regulators of vesicle trafficking and also participate in actin cytoskeleton remodelling, therefore, we examined their role in TNTs. Rab35 functions with several proteins that are involved in vesicle trafficking such as ACAP2, MICAL-L1, ARF6 and EHD1, which are known to be involved in neurite outgrowth. Here we show that Rab35 promotes TNT formation and TNT-mediated vesicle transfer in a neuronal cell line. Furthermore, our data indicates that Rab35-GTP, ACAP2, ARF6-GDP and EHD1 act in a cascade mechanism to promote TNT formation. Interestingly, MICAL-L1 overexpression, shown to be necessary for the action of Rab35 on neurite outgrowth, showed no effect on TNTs, indicating that TNT formation and neurite outgrowth may be processed through similar but not identical pathways, further supporting the unique identity of these cellular protrusions.

Despite of high in vitro anticancer efficacy of many chemotherapeutics, their in vivo use is limited due to lack of biocompatibility and tumor targeting. Near-infrared (NIR) photothermally induced phase transition of PLGA-PEG regime was utilized for developing highly efficient photoresponsive drug delivery systems. Co-encapsulation of plasmonic gold nanorods (GNRs), as NIR-trigger, with the novel and highly efficient anticancer drug N'-(2-Methoxybenzylidene)-3-methyl-1-phenyl-H-Thieno[2,3-c]Pyrazole-5-Carbohyd-razide (MTPC) produced NIR-responsive biodegradable polymeric (PLGA-b-PEG) nanocapsules. This remotely controllable drug release significantly enhanced both biodistribution and pharmacokinetics of the hydrophobic drug. Intravenous (IV) injection of the prepared nanocapsules (MTPC/GNRs@PLGA-PEG) to tumor-bearing mice followed by extracorporeal exposure of the tumor to NIR light resulted in highly selective drug accumulation at the tumor sites. In vivo biodistribution and pharmacokinetics utilizing iodine-131 drug-radiolabelling technique revealed a maximum target to non-target ratio (T/NT) of 5.8, 4 h post-injection with maximum drug level in the tumor (6.3 ± 0.6% of the injected dose). Graphical abstract.

Aim: Preparation of pegylated gold nanorods (PEG-AuNRs) that are capable of converting near infrared (NIR) light into heat. Evaluation of cancer therapeutic efficacy and long-term toxicity of the proposed photothermal therapy in comparison with other conventional modalities., Materials and Methods: Prepared PEG-AuNRs were characterized by measuring their absorption spectra, zeta potential, and transmission electron microscope (TEM). Cancer therapeutic efficacy was assessed by monitoring tumor growth, measuring DNA damage and superoxide dismutase (SOD) and malondialdehyde (MDA) levels in addition to examining tumor histopathology. Further analysis concerning the toxicity of all the proposed treatment modalities was also assessed by evaluating the cytotoxicity and genotoxicity in liver and kidney tissues., Key Findings: The results demonstrated that both photothermal therapy (PEG-AuNRs + NIR laser) and chemotherapy (cisplatin) have higher efficacy in diminishing Ehrlich tumor growth with significance DNA damage over the other treatment modalities. Concerning the biosafety issue, mice treated photothermally exhibited lower MDA level and higher SOD activity in liver and kidney tissues compared with other treated groups. DNA damage represented by tail moment and olive moment of kidney tissues exhibited lower values for photothermal treated group and higher values for cisplatin treated group., Significance: Photothermal therapy (PEG-AuNRs + NIR laser) potentiates higher efficacy in treating Ehrlich tumor with minimum toxicity in comparison with other conventional treatment modalities., Competing Interests: Declaration of competing interest The authors declare that there are no conflicts of interest., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Complexation of biopolymers with halloysite nanotubes (HNTs) can greatly affect their applicability as materials building blocks. Here we have performed a systematic investigation of fabrication of halloysite nanotubes complexes with nucleotides and genomic DNA. The binding of DNA and various nucleotide species (polyAU, UMP Na 2 , ADP Na 3 , dATP Na, AMP, uridine, ATP Mg) by halloysite nanotubes was tested using UV-spectroscopy. The study revealed that binding of different nucleotides to the nanoclay varied but was low both in the presence and absence of MgCl 2 , while MgCl 2 facilitated significantly the binding of longer molecules such as DNA and polyAU. Modification of the nanotubes with DNA and nucleotide species was further confirmed by measurements of ζ-potentials. DNA-Mg-modified nanotubes were characterized using transmission electron (TEM), atomic force (AFM) and hyperspectral microscopies. Thermogravimetric analysis corroborated the sorption of DNA by the nanotubes, and the presence of DNA on the nanotube surface was indicated by changes in the surface adhesion force measured by AFM. DNA bound by halloysite in the presence of MgCl 2 could be partially released after addition of phosphate buffered saline. DNA binding and release from halloysite nanotubes was tested in the range of MgCl 2 concentrations (10-100 mM). Even low MgCl 2 concentrations significantly increased DNA sorption to halloysite, and the binding was leveled off at about 60 mM. DNA-Mg-modified halloysite nanotubes were used for obtaining a regular pattern on a glass surface by evaporation induced self-assembly process. The obtained spiral-like pattern was highly stable and resisted dissolution after water addition. Our results encompassing modification of non-toxic clay nanotubes with a natural polyanion DNA will find applications for construction of gene delivery vehicles and for halloysite self-assembly on various surfaces (such as skin or hair).

The majority of women with recurrent ovarian cancer (OvCa) develop malignant ascites with volumes that can reach > 2 L. The resulting elevation in intraperitoneal pressure (IPP), from normal values of 5 mmHg to as high as 22 mmHg, causes striking changes in the loading environment in the peritoneal cavity. The effect of ascites-induced changes in IPP on OvCa progression is largely unknown. Herein we model the functional consequences of ascites-induced compression on ovarian tumor cells and components of the peritoneal microenvironment using a panel of in vitro, ex vivo and in vivo assays. Results show that OvCa cell adhesion to the peritoneum was increased under compression. Moreover, compressive loads stimulated remodeling of peritoneal mesothelial cell surface ultrastructure via induction of tunneling nanotubes (TNT). TNT-mediated interaction between peritoneal mesothelial cells and OvCa cells was enhanced under compression and was accompanied by transport of mitochondria from mesothelial cells to OvCa cells. Additionally, peritoneal collagen fibers adopted a more linear anisotropic alignment under compression, a collagen signature commonly correlated with enhanced invasion in solid tumors. Collectively, these findings elucidate a new role for ascites-induced compression in promoting metastatic OvCa progression.

Background: Ineffective integration has been recognized as one of the major causes of early orthopedic failure of titanium-based implants. One strategy to address this problem is to develop modified titanium surfaces that promote osteoblast differentiation. This study explored titanium surfaces modified with TiO2 nanotubes (TiO2 NTs) capable of localized drug delivery into bone and enhanced osteoblast cell differentiation., Materials and Methods: Briefly, TiO2 NTs were subjected to anodic oxidation and loaded with Metformin, a widely used diabetes drug. To create surfaces with sustainable drug-eluting characteristics, TiO2 NTs were spin coated with a thin layer of chitosan. The surfaces were characterized via scanning electron microscopy, atomic force microscopy, and contact angle measurements. The surfaces were then exposed to mesenchymal bone marrow stem cells (MSCs) to evaluate cell adhesion, growth, differentiation, and morphology on the modified surfaces., Results: A noticeable increase in drug release time (3 days vs 20 days) and a decrease in burst release characteristics (85% to 7%) was observed in coated samples as compared to uncoated samples, respectively. Chitosan-coated TiO2 NTs exhibited a considerable enhancement in cell adhesion, proliferation, and genetic expression of type I collagen, and alkaline phosphatase activity as compared to uncoated TiO2 NTs., Conclusion: TiO2 NT surfaces with a chitosan coating are capable of delivering Metformin to a bone site over a sustained period of time with the potential to enhance MSCs cell attachment, proliferation, and differentiation., Competing Interests: The authors report no conflicts of interest in this work., (© 2020 Hashemi et al.)

Halloysite nanotubes (HNTs) are a kind of aluminosilicate clay with a unique hollow tubular structure that has been intensively explored for various applications especially in biomedical fields owing to their excellent biocompatibility, biodegrading potential and low cost. Surface modification of HNTs with functional polymers will greatly improve their properties and endow new functions for biomedical applications. In this work, a light-induced reversible addition-fragmentation chain transfer (RAFT) polymerization was introduced to successfully prepare HNTs based fluorescent HNTs/poly(PEGMA-Fl) composites in the presence of oxygen using diacrylate-fluorescein and poly (ethylene glycol) methyl ether methacrylate (PEGMA) as the monomers. Without other catalysts, heating, and deoxygenation procedure, the polymerization process can take place under mild conditions. Besides, owing to the introduction of fluorescein and PEGMA on the surface of HNTs, the resultant HNTs/poly(PEGMA-Fl) composites display high water dispersibility and stable fluorescence. The results from cell viability examination and confocal laser scanning microscopy also demonstrated that HNTs/poly(PEGMA-Fl) composites could be internalized by L929 cells with bright fluorescence and low cytotoxicity. Taken together, we developed a novel photo-initiated RAFT polymerization method for the fabrication of HNTs based fluorescent polymeric composites with great potential for biomedical applications. More importantly, many other multifunctional HNTs based polymer composites could also be fabricated through a similar strategy owing to good designability of RAFT polymerization., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Colloidal crystal engineering with nucleic acid-modified nanoparticles is a powerful way for preparing 3D superlattices, which may be useful in many areas, including catalysis, sensing, and photonics. To date, the building blocks studied have been primarily based upon metals, metal oxides, chalcogenide semiconductors, and proteins. Here, we show that metal-organic framework nanoparticles (MOF NPs) densely functionalized with oligonucleotides can be programmed to crystallize into a diverse set of superlattices with well-defined crystal symmetries and compositions. Electron microscopy and small-angle X-ray scattering characterization confirm the formation of single-component MOF superlattices, binary MOF-Au single crystals, and two-dimensional MOF nanorod assemblies. Importantly, DNA-modified porphyrinic MOF nanorods (PCN-222) were assembled into 2D superlattices and found to be catalytically active for the photooxidation of 2-chloroethyl ethyl sulfide (CEES, a chemical warfare simulant of mustard gas). Taken together, these new materials and methods provide access to colloidal crystals that incorporate particles with the well-established designer properties of MOFs and, therefore, increase the scope of possibilities for colloidal crystal engineering with DNA.

Chitosan is attracting increasing attention for biomedical applications because of its biocompatibility. In the present study, raw halloysite nanotubes (RHNTs) were functionalised with (3-aminopropyl) triethoxysilane (APTS) and then a sequence of novel chitosan biofilms were prepared by adding amino-modified halloysite nanotubes (HNTs-NH 2 ) as a reinforcing material and ethylene glycol diglycidyl ether (EGDE) as a cross-linking agent. The reaction between the APTS and the RHNTs was demonstrated through characterisation of the HNTs-NH 2 . Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD) results confirmed the interaction of HNTs-NH 2 with chitosan and EGDE. Scanning electron microscopy (SEM) showed a transformation of the surface morphology of the chitosan films. Measurement of the mechanical and thermal properties showed that the nanocomposite films exhibited substantial improvements in tensile strength, elongation at break and thermal stability compared with those of the pure chitosan films. However, the swelling rate of the nanocomposite films decreased upon incorporation of the HNTs-NH 2 and EGDE. In addition, the water vapour transmission rate (WVTR) of the nanocomposite films was also improved. Given the aforementioned results, chitosan nanocomposites are promising biomedical materials., Competing Interests: Declaration of Competing Interest There is no conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Bamboo-plastic composites (BPCs) as new biomass-plastic composites have recently attracted much attention. However, weak mechanical performance and high moisture absorption as well as low thermal stability greatly limit their industrial applications. In this context, different amounts of halloysite nanotubes (HNTs) were used as a natural reinforcing filler for BPCs. It was found that the thermal stability of BPCs increased with increasing HNT contents. The mechanical strength of BPCs was improved with the increase in HNT loading up to 4 wt% and then worsened, while the impact strengths were slightly reduced. Low HNT content (below 4 wt%) also improved the dynamic thermomechanical properties and reduced the water absorption of the BPCs. Morphological studies confirmed the improved interfacial compatibility of the BPC matrix with 4 wt% HNT loading, and high-concentration HNT loading (above 6 wt%) resulted in easy agglomeration. The results highlight that HNTs could be a feasible candidate as nanoreinforcements for the development of high-performance BPCs.

A biomimetic NM was developed to serve as a tissue-engineering biological scaffold, which can enhance stem cell anchorage. The biomimetic NM is formed from JBNTs and FN through self-assembly in an aqueous solution. JBNTs measure 200-300 µm in length with inner hydrophobic hollow channels and outer hydrophilic surfaces. JBNTs are positively charged and FNs are negatively charged. Therefore, when injected into a neutral aqueous solution, they are bonded together via noncovalent bonding to form the NM bundles. The self-assembly process is completed within a few seconds without any chemical initiators, heat source, or UV light. When the pH of the NM solution is lower than the isoelectric point of FNs (pI 5.5-6.0), the NM bundles will self-release due to the presence of positively charged FN. NM is known to mimic the extracellular matrix (ECM) morphologically and hence, can be used as an injectable scaffold, which provides an excellent platform to enhance hMSC adhesion. Cell density analysis and fluorescence imaging experiments indicated that the NMs significantly increased the anchorage of hMSCs compared to the negative control.

Interest in nanostructures such as titanate nanotubes (TNT) has grown notably in recent years due to their biocompatibility and economic viability, making them promising for application in the biomedical field. Quercetin (Qc) has shown great potential as a chemopreventive agent and has been widely studied for the treatment of diseases such as bladder cancer. Motivated by the possibilities of developing a new hybrid nanostructure with potential in biomedical applications, this study aimed to investigate the incorporation of quercetin in sodium (NaTNT) and zinc (ZnTNT) titanate nanotubes, and characterize the nanostructures formed. Qc release testing was also performed and cytotoxicity in Vero and T24 cell lines evaluated by the MTT assay. The effect of TNTs on T24 bladder cancer cell radiosensitivity was also assessed, using cell proliferation and a clonogenic assay. The TNT nanostructures were synthesized and characterized by FESEM, EDS, TEM, FTIR, XRD and TGA. The results showed that the nanostructures have a tubular structure and that the exchange of Na + ions for Zn 2+ and incorporation of quercetin did not alter this morphology. In addition, interaction between Zn and Qc increased the thermal stability of the nanostructures. The release test showed that maximum Qc delivery occurred after 24 h and the presence of Zn controlled its release. Biological assays indicated that the NaTNTQc and ZnTNTQc nanostructures decreased the viability of T24 cells after 48 h at high concentrations. Furthermore, the clonogenic assay showed that NaTNT, NaTNTQc, ZnTNT and ZnTNTQc combined with 5 Gy reduced the formation of polyclonal colonies of T24 cells after 48 h. The results suggest that the nanostructures synthesized in this study interfere in cell proliferation and can therefore be a powerful tool in the treatment of bladder cancer., (Copyright © 2020 Elsevier B.V. All rights reserved.)