Search

By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low-beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. This AUP effort is shared by BNL, Fermilab, and LBNL, with strand verification tests at NHMFL. An important step of the AUP QA plan is the testing of MQXFA magnets in a vertical cryostat at BNL. The acceptance criteria that could be tested at BNL were all met by the first four production magnets (MQXFA03-MQXFA06). Subsequently, two magnets (MQXFA07 and MQXFA08) did not meet some of the criteria and were disassembled. Lessons learned during the disassembly of MQXFA07 caused a revision to the assembly specifications that were used for MQXFA10 and subsequent magnets. In this article, we present a summary of: 1) the fabrication and test data for all the MQXFA magnets; 2) the analysis of MQXFA07/A08 test results with characterization of the limiting mechanism; 3) the outcome of the investigation, including the lessons learned during MQXFA07 disassembly; and 4) the finite element analysis correlating observations with test performance.

A large bore 'High-Temperature Superconductor Cable Test Facility Magnet' for testing advanced cables and inserts in high transverse field is in its design phase. This magnet will be the core component of a facility for developing conductors and accelerator magnets operating above 15 T, an enabling technology for next-generation fusion devices using magnetic confinement of plasma and for future energy frontier colliders. The procurement of Nb3Sn conductor, fabrication of cables, winding of coils, and assembly of the dipole magnet will be done at Lawrence Berkeley National Laboratory (LBNL) and the test pit and cryostat will be constructed at Fermi National Accelerator Laboratory. This article will present the conductor element of the LBNL project, specifically cable design parameters (based on the Bruker OST RRP^{\bigcirc \!\!\!\! {\hbox{R}}} Nb3Sn superconducting wire) and the development phase cable fabrication experience. Challenges of the cable fabrication will be discussed. The wire and cable planned for this magnet are similar to those under study for the Future Circular Collider and other large facility magnets. The successful fabrication of the development cable has positive implications for these other projects.

The Cu-SN phases in a high-SN high critical current density wire were studied using Cu-SN mixing heat treatments.

Heat treatments were performed on an ITER type internal Sn Nb3Sn superconductor and stages occurring after such treatment were examined.

A study was conducted on the metallurgical state and composition of Nb-Ti superconducting wires near the upper critical field to separate the irreversibility field, resistively measured transition field and the upper critical field. Measurements were conducted on small current transport, magnetization and extended electric field vs current density curves for transition analysis. Results show a strong correlation between bulk flux pinning, magnetization, extrapolation and extended electric field vs current density curves.