Search

Background: Since the muscles of chewing are involved in the region of the mandibular angle, important structures in surgical and orthodontic procedures, to study its morphological aspects and the possible influence of different patterns of skeletal development would be of interest. Thus, this study aimed to assess the influence of patient characteristics - such as sex, skeletal malocclusion (Class I, Class II, and Class III) and facial type (brachycephalic, mesocephalic, and dolichocephalic) - on the width, height, thickness, and volume of the mandibular angle, using cone-beam computed tomography (CBCT) scans., Methods: CBCT scans were assessed - 144 men and 154 women, total of 298 - and classified according to skeletal patterns (skeletal malocclusions and facial types). Width, height, and thickness of the mandibular angle were measured using OnDemand 3D software. The volumetric measures of the mandibular angle were obtained using the ITK-SNAP software. Analysis of Variance (multiway ANOVA) with Tukey's post-hoc test compared the data, with a 5% significance level., Results: Among the factors studied, sex significantly influenced all the analyzed variables (height, width, thickness, and volume of the mandibular angle) (p < 0.05); in general, male individuals presented higher values than females. In some cases, the skeletal malocclusion and facial type factors influenced only the width and height variables (p < 0.05); in general, the Class III and dolichocephalic individuals presented higher values in relation to the other types of skeletal malocclusions and facial types., Conclusions: Variations in the craniofacial growth pattern, considering the different skeletal malocclusions and facial types, had some influence in the width and height dimensions of the mandibular angle. Furthermore, sex influenced all the studied variables., (© 2023. The Author(s).)

This study aimed to assess the microstructure, chemical composition, and image quality of different photostimulable phosphor plates (PSP). Four PSP systems, Express®, Digora®, VistaScan®, and Apixia,® were assessed. Five radiographs of a homogeneous acrylic phantom were obtained with the PSP of each system, to acquire a total of 20 images. The images were objectively evaluated for uniformity using mean grey and standard deviation (SD) of their grey values. PSP receptors were analyzed using scanning electron microscopy (SEM) to determine the thickness of the granule layer and the size of the granules. The chemical composition of the PSP receptors was analyzed using total reflection X-ray fluorescence (TXRF). VistaScan showed more uniform and higher density images than the other tested systems (p < 0.05), as well as the lowest SD of grey values (p < 0.05). Regarding the microstructure of the receptors, Digora and VistaScan had thicker granule layers than Express and Apixia, and VistaScan had smaller granules than Digora and Express (p < 0.05). Fourteen chemical elements were detected in the receptors, with barium being the element with the highest concentration in all PSP systems. The microstructure, chemical composition, and image quality varied among all four PSP receptors studied. VistaScan receptors showed the smallest variation in granule size, one of the thickest granule layers, and the most uniform and least noisy images.

Objective: To evaluate the influence of the file format of digital periapical radiographs on the diagnosis of vertical root fracture (VRF)., Study Design: Periapical radiographic images of 34 single-rooted teeth-19 with VRF, and 15 without VRF were acquired using two digital systems-Digora Toto, and Digora Optime, and exported into four different file formats-TIFF, BMP, PNG, and JPEG, totaling 272 radiographs. The radiographs were assessed by five examiners for the detection of VRF, using a 5-point scale (1-definitely absent; 2-probably absent; 3-uncertain; 4-probably present; 5-definitely present). Diagnostic values of area under the ROC curve, specificity, and sensitivity for the diagnosis of VRF were calculated. The results were compared by two-way Analysis of Variance with post hoc Tukey's test. The intra- and inter-examiner agreements were measured by the Kappa test. The significance level was set at 5% for all analyses., Results: The values of intra-examiner agreement varied from moderate (0.56) to almost perfect (0.81), while the values of inter-examiner agreement varied from fair (0.29) to moderate (0.60). The image file format did not influence the diagnostic values for VRF for any of the radiographic systems tested (p > 0.05). Digora Toto had significantly greater values of area under the ROC curve than Digora Optime for all file formats (p = 0.001)., Conclusion: The image file format of periapical radiographs does not influence the diagnosis of VRF, regardless of the digital radiography system., (© 2021. The Author(s), under exclusive licence to Japanese Society for Oral and Maxillofacial Radiology and Springer Nature Singapore Pte Ltd.)

Background: As the hard palate is a central structure of the skull, and its close relationship with the nasal cavity, oral cavity, and maxillary sinuses, it would be of interest to study if there is a relationship between this bone and other structures of the stomatognathic system. Thus, this study aimed to assess the dimensions of the hard palate and associate them with sex, and skeletal and breathing patterns. Also, to investigate if there is a relationship between these dimensions and the volumes of the upper airways and maxillary sinuses., Methods: Two hundred and ninety-eight CBCT scans of patients were classified according to sex, and skeletal and breathing patterns. Then, the linear dimensions of width and height of the hard palate at the regions of the first premolars and first molars, and the volumes of the upper airways and maxillary sinuses were measured using the CS 3D Imaging and ITK-SNAP software, respectively. Data were submitted to multi-way analysis of variance and linear regression, with a significance level of 5% (α = 0.05)., Results: Sex and facial type influenced the hard palate dimensions (p < 0.05). Males had greater width and height of the hard palate than females (p < 0.0001). It was observed greater width for brachycephalics at the first premolars region (p = 0.0032), and greater height for dolichocephalics at the first premolars (p = 0.0154) and first molars (p = 0.0038) regions. Skeletal malocclusion and breathing pattern did not influence the measurements of the hard palate (p > 0.05). There was a significant relationship between the width and height of the hard palate at the premolar's region and the total volume of the upper airways (p = 0.018, and p = 0.038), and between both dimensions of the hard palate at the molar's region and the total volume of the maxillary sinuses (p < 0.0001)., Conclusions: The hard palate dimensions are influenced by sex and facial type, but not by skeletal malocclusion or breathing pattern. Also, there is an association between these dimensions and the volumes of the upper airways and maxillary sinuses., (© 2021. The Author(s).)

Aim: To evaluate the influence of the tube current and metal artifact reduction (MAR) tool on the diagnosis of vertical root fractures (VRF) in a tooth adjacent to a zirconium implant, in cone-beam computed tomography (CBCT) images., Methodology: Thirty single-rooted teeth (15 with VRF and 15 control group) were individually positioned in a mandible, and scanned with the OP300 CBCT unit. Images were acquired using a standardized protocol: 5 × 5 cm field of view, 0.08-mm voxel size, and 90 kVp. Each tooth was scanned with and without a zirconium implant in its vicinity, using different tube currents (4 mA, 8 mA, and 10 mA) and conditions of MAR (enabled × disabled). Diagnostic values were calculated for each protocol, and compared by multi-way analysis of variance., Results: The ROC curve and sensitivity values did not differ significantly among the tube currents, regardless of the presence of the implant and MAR condition (p > 0.05). There were also no significant differences among the tube currents for the specificity values (p > 0.05); however, the specificity differed significantly between the "with implant" and "without implant" conditions, within the same MAR condition and tube current (p < 0.05). Specificity was significantly lower when the implant was present (p < 0.05)., Conclusion: The presence of a zirconium implant impairs the diagnosis of VRF in teeth adjacent to the artifact-generator material. Neither the tube current nor the MAR tool is effective in improving this diagnostic task. Therefore, in this clinical scenario, the use of the lowest tube current (4 mA), without MAR activation, is recommended., Clinical Relevance: Considering that the tube current is one of the main factors that influence the radiation dose and image quality in CBCT, and that metal artifacts negatively influence the diagnosis of VRF in areas adjacent to the artifact-generator material, it is important to evaluate the effect of this energetic parameter in the diagnosis of VRF in teeth adjacent to zirconium implants.

Purpose: As the hard palate is a central structure of the skull and is involved in orthodontic and surgical procedures, it would be of interest to study the morphological aspects of this bone and its possible variations as per different patterns of skeletal development. Thus, this study aimed to develop a classification for the different morphological characteristics of the hard palate and to evaluate the relationship between these characteristics and the different skeletal patterns, using cone-beam computed tomography (CBCT)., Materials and Methods: This retrospective and cross-sectional study used CBCT scans of patients seen from January 2014 to December 2016. Carestream Dental 3D Imaging software was applied to classify each patient according to vertical and sagittal skeletal patterns, and to evaluate the 3 morphological characteristics of the hard palate: depth (flat, regular, or deep), inclination (superior, parallel, or inferior), and presence of a bony projection (S-shaped). χ 2 and Fisher's exact tests evaluated the relationship between the hard palate characteristics and the different skeletal patterns., Results: A total of 298 CBCT scans (144 males and 154 females) were evaluated. The depth of the hard palate was significantly related to both skeletal patterns in males (P < .05), with Class II and dolichocephalics presenting a greater amount of deep palates, while classes I and III and brachycephalics had a greater amount of regular palates. The inclination of the hard palate was significantly associated with the facial type in females (P < .05), with brachycephalics and mesocephalics presenting a greater amount of parallel palates, whereas dolichocephalics had a greater number of inferiorly inclined palates. Regarding the presence of the S-shape in the hard palate, there was a greater number of this projection in Class II males and brachycephalic females., Conclusions: A morphological classification for the hard palate was developed. The morphology of the hard palate varied among the different skeletal patterns., (Copyright © 2020 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Objectives: To compare the pulp volume of individuals with altered and normal systemic blood pressure (BP) in order to verify if high BP promotes dimensional modifications in the pulp space., Materials and Methods: Cone beam computed tomography scans of 91 patients (49 females and 42 males, mean age 31.7 ± 6.38 years) who had a healthy maxillary canine were selected. Values of arterial BP measured at two dental visits were used to classify the sample as normal BP (< 130 × 80 mmHg) and altered BP (≥ 130 × 80 mmHg); 49 patients had normal BP and 42 had altered BP. One oral radiologist evaluated each patient's pulp and tooth volumes, using semi-automatic segmentation, and the tooth length. Data were submitted to Student's t test and logistic regression, with a significance level of 5% (p < 0.05)., Results: Pulp volume (p = 0.0027), pulp volume/tooth volume (p = 0.0013), and pulp volume/tooth length (p = 0.0007) ratios were greater in the altered BP group. Conversely, there was no difference in tooth volume between the groups (p = 0.0697). A logistic regression model (p = 0.0002) using pulp volume and age enabled the development of a formula for predicting altered BP, with 68% accuracy., Conclusions: Individuals with altered systemic BP have greater pulp volumes than those with normal BP. The formula developed in this study may indicate the presence of altered BP., Clinical Relevance: As arterial hypertension is a silent disease that produces no warning signs or symptoms, identification of modifications in the pulp volume in cone beam computed tomography scans may be an adjuvant sign of the diagnosis of this disease.

Objectives: To assess C-shaped root canal configuration by identifying its prevalence and each configuration type proportion, according to tooth (mandibular first or second molar) and demographic characteristics in a Brazilian population, using cone-beam computed tomography (CBCT). Moreover, it was verified if there is a relationship between root canal configuration observed in two-dimensional reconstructions of CBCT and presence of C-shape., Methods: Mandibular jaw CBCT scans (184 males and 220 females, aged 15 to 80 years), which presented 1464 mandibular molars (710 first molars and 754 second molars), were assessed. Teeth were evaluated for the presence and type of C-shaped root canals by observing the roots at five levels in CBCT axial reconstructions. Root canal configuration was assessed in panoramic reconstructions. Data were statistically analyzed at a significance level of 5%., Results: Of the 1464 mandibular molars, 125 (8.5%) were classified as C-shaped. This variation was more prevalent in females (n = 107, 85.6%) and in second molars (n = 108, 86.4%). C1 (uninterrupted C-shaped canal) was the most prevalent type of C-shaped configuration (41.76%), while C5 (no canal lumen) was the least prevalent type (0.96%). Single root with single canal in panoramic reconstructions was the most predominant configuration for C-shaped teeth (n = 54, 43.2%). Fused roots presented 17.2 higher odds of being associated with C-shaped root canals than non-fused roots., Conclusions: C-shaped root canals were more prevalent in mandibular second molars and in females. Additionally, clinicians should bear in mind the greater possibility of C-shaped configuration in mandibular molars with fused roots., Clinical Relevance: Mandibular molars with C-shaped canals present a clinical challenge. A higher C-shaped proportion was noted in radiographic fused root types, which had 17.2 higher odds of presenting such anatomy when compared to radiographic non-fused roots. Root radiographic features may help in diagnosis of complex C-shaped morphologies.

The present study used microcomputed tomography (micro-CT) images to assess the prevalence, number, and location of apical ramifications (ARs) in the root canals of different dental groups in a Brazilian population. Three hundred and sixty-seven extracted human teeth, totaling 475 roots, were scanned by micro-CT at 19.6 µm spatial resolution. The obtained images were evaluated by two observers in consensus, and a descriptive analysis was performed to verify the prevalence, number, and location of ARs in each dental group. Chi-square test was used to compare the prevalence of ARs in different types of roots, and one-way analysis of variance compared the number of ARs in the apical 1 mm, 2 mm, and 3 mm of the root. Significance level was established at 5% (α=0.05). ARs were present in 253 (53.3%) of the 475 roots evaluated. A total of 607 ARs were detected, with the vast majority (530) located at one and two millimeters from the main foramen. The highest prevalence of ARs was observed in maxillary canines (65%); maxillary premolars - single-rooted (83.3%), buccal root (80%), and palatine root (73.3%); mandibular premolars (64.2%); mesiobuccal root of maxillary molars (76.6%); and mesial root of mandibular molars (66.6%). For the Brazilian population, most of the ARs are located in the apical 1 and 2 mm of the root, with greater prevalence in the posterior teeth and maxillary canines. These findings suggest the need for additional attention while planning endodontic treatments, including strategies to effectively clean and fill the apical region.

Objectives: To create a new phantom design to evaluate the real impact of artefacts caused by titanium on bone structures in cone beam CT images considering different positions and quantity of metals in the dental arch, with and without metal artefact reduction (MAR)., Methods: A three cylindrical polymethyl methacrylate (PMMA) plate phantom was designed containing eight perforations arranged to simulate the lower dental arch in the intermediate plate. Three titanium cylinders were positioned in different locations and quantities to test different clinical conditions and to quantify the impact of the metal artefact around five bone cylinders. Scans were carried out in seven different protocols (Control, A-F) in two cone beam CT devices (OP300 Maxio and Picasso Trio). Eight regions of interest around each cortical and trabecular bone were used to measure the grey value standard deviation corresponding the artefact expression in the Image J software. Both the artefact expression and the MAR effect were assessed using the Wilcoxon, Friedman (Dunn) and Kruskal-Wallis tests (significance level of 5%)., Results: For both devices, MAR was statistically efficient only for the protocols E, and F. Protocol F (three metals on the adjacent area of the analysis region) showed higher artefact expression when compared to the others., Conclusion: In conclusion, the new phantom design allowed the quantification of the metal artefact expression caused by titanium. The metal artefact expression is higher when more metal objects are positioned in the adjacent bone structures. MAR may not be effective to reduce artefact expression on the adjacencies of those objects for the devices studied.

Objective: To evaluate the artifact expression of a new material-polylactic acid (PLA)/hydroxyapatite (HA)/graphene oxide (GO) nanocomposite-and compare it with that of commonly used dental materials, using cone-beam computed tomography., Materials and Methods: Cylinders of amalgam alloy, metal alloy, titanium, gutta-percha, and PLA/HA/GO were individually placed in the center of an acrylic phantom. Three images of each phantom + cylinder set were acquired using a Picasso Trio unit (Vatech, Hwaseong, South Korea) set at 90 kVp, 3.7 mA, 0.2 mm 3 voxel size, and 12 × 8.5 cm FOV. Three images of a control group (sound phantom) were also obtained. Eight ROIs were established in each image to evaluate the standard deviation (S.D.) of gray values in the ImageJ Software. The Kruskal-Wallis test with the Student-Newman-Keuls post hoc was employed, considering a significance level of 5%., Results: There were no significant differences in S.D. between the control and PLA/HA/GO images (p = 0.712). Both control and PLA/HA/GO showed fewer image artifacts than the other materials (p < 0.05). The images of the amalgam alloy did not differ from the metal alloy images (p = 0.691), showing more artifacts than the gutta-percha (p = 0.028) and titanium (p = 0.051)., Conclusions: The PLA/HA/GO produced fewer artifacts and a better-quality image than the other tested materials., Clinical Relevance: The PLA/HA/GO has physical and biological properties similar to those of dental materials. Since it has produced fewer image artifacts, this new nanocomposite may be employed in the near future, enhancing the diagnosis in CBCT.

Objectives: To access the influence of the addition of a lead foil to intraoral digital radiographic receptors on image contrast and approximal caries lesions diagnosis., Methods: 40 posterior teeth were distributed in silicone phantoms composed of two premolars, two molars and a non-test canine. Radiographic images of the phantoms were obtained with and without the incorporation of a lead foil, using the Digora Optime and Digora Toto systems. Four observers scored the images for the presence of caries lesions, using a 5-point scale. Images of an aluminum step wedge were acquired with and without the incorporation of a lead foil. Gray values and standard deviation of gray values were calculated in different thickness of the step wedge and, then, contrast variation was calculated., Results: Presence of a lead foil did not influence caries lesions diagnostic values, regardless of the type of digital system ( p > 0.05). In general, the objective analysis was not influenced by the presence of a lead foil in any of the tested systems ( p > 0.05). However, Digora Toto images showed greater gray values, lower standard deviation of gray values and lower contrast variation, regardless of the presence of the lead foil ( p < 0.05)., Conclusions: The addition of a lead foil to intraoral digital receptors did not influence image contrast nor caries lesions diagnosis.

Objective: To evaluate the quality of images obtained with the addition of a lead foil to intraoral digital receptors., Methods: Radiographic images of 34 single-rooted human teeth - 19 with vertical root fracture (VRF) and 15 of the control group - were obtained with and without the addition of a lead foil, using the VistaScan, Express, Digora Optime and Digora Toto systems. Images were evaluated by five observers regarding the diagnosis of VRF, using a 5-point scale. In a second moment, an observer preference analysis related to the presence of the lead foil was performed. Images of an acrylic phantom were also obtained with and without the addition of a lead foil, and the quantities of uniformity, grey value and standard deviation of grey values were obtained., Results: There were no significant differences in the VRF diagnostic values, considering the presence of the lead foil. Regarding the image quality preference, the observers preferred images acquired with the lead foil for all systems tested, but with greater values for Digora Optime (61.33%) and Express (61.33%). The presence of the lead foil did influence the image uniformity in all systems tested ( p < 0.05). Moreover, the lead foil increased the mean of grey values for Digora Optime and Express images ( p < 0.05), however it did not influence the SD in any of the digital systems ( p > 0.05)., Conclusion: The addition of a lead foil to intraoral digital receptors produces a positive effect in the image quality objectively detected by means of uniformity and subjective visual preference.

The purpose of this study was to test the radioprotective effect of selenium in the bone microarchitecture of irradiated rats mandibles. Forty rats were separated into 4 groups with 10 animals: control group (CG), irradiated group (IG), sodium selenite group (SSG) and sodium selenite irradiated group (SSIG). A single dose of 0.8 mg/kg sodium selenite was administered intraperitoneally in the SSG and SSIG groups. One hour later, animals of IG and SSIG groups were irradiated with 15 Gy of x-rays. Forty days after radiation a bilateral extraction of the mandibular first molars was performed. After the extraction procedure, five rats were killed after fifteen days and others five after thirty days. Micro- computed tomography was used to evaluate cortical and trabecular bone of each rat. The mean and standard deviation of each bone microarchitecture parameter were analyzed using the statistical test of two-way Analysis of Variance (ANOVA). At 15 days, the bone volume presented higher values in the CG and SSG groups (p=0.001). The same groups presented statistically significant higher values when bone volume fraction (p<0.001) and trabecular thickness (p<0.001) were analyzed. At 30 days, it was observed that in relation to the bone volume fraction, SSG group presented the highest value while SSIG group had the lowest value, with statistically significant difference (p=0.016). Sodium selenite demonstrated a median radioprotective effect in the bone microarchitecture of irradiated mandibles, which indicates the substance may be a potential radioprotective agent against chronic effects of high doses of ionizing radiation.

Purpose: To evaluate the influence of facial profile and age on the morphology of the nasopalatine canal., Materials and Methods: One hundred thirty-two cone-beam computed tomograms were classified according to facial profile-mesofacial, brachyfacial, and dolichofacial-and divided into the following age groups: 21 to 30, 31 to 40, 41 to 50, and 51 to 60 years. Measurements were obtained for openings of the incisive and nasopalatine foramina, alveolar bone thickness, and the full length, most constricted region, and volume of the nasopalatine canal. Intra- and inter-examiner agreements were calculated using the intraclass correlation coefficient. After exploratory and descriptive analysis, data were subjected to 2-way analysis of variance and Tukey test for comparisons between facial profiles and age groups. The significance level was 5% (α = 0.05)., Results: Intra- and inter-examiner reproducibilities were excellent for all measurements. Patients older than 50 years presented a significantly larger nasopalatine canal than patients 21 to 30 years old for all facial profiles (P ≤ .05). Linear measurements obtained from the nasopalatine canal showed no significant difference between facial profiles and age groups (P > .05)., Conclusions: The nasopalatine canal was not influenced by facial profile but did exhibit an increased volume with aging, particularly after 50 years of age., (Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Introduction: The purpose of this article was to evaluate the pharyngeal space volume, and the size and shape of the mandible and the hyoid bone, as well as their relationships, in patients with different facial types and skeletal classes. Furthermore, we estimated the volume of the pharyngeal space with a formula using only linear measurements., Methods: A total of 161 i-CAT Next Generation (Imaging Sciences International, Hatfield, Pa) cone-beam computed tomography images (80 men, 81 women; ages, 21-58 years; mean age, 27 years) were retrospectively studied. Skeletal class and facial type were determined for each patient from multiplanar reconstructions using the NemoCeph software (Nemotec, Madrid, Spain). Linear and angular measurements were performed using 3D imaging software (version 3.4.3; Carestream Health, Rochester, NY), and volumetric analysis of the pharyngeal space was carried out with ITK-SNAP (version 2.4.0; Cognitica, Philadelphia, Pa) segmentation software. For the statistics, analysis of variance and the Tukey test with a significance level of 0.05, Pearson correlation, and linear regression were used., Results: The pharyngeal space volume, when correlated with mandible and hyoid bone linear and angular measurements, showed significant correlations with skeletal class or facial type. The linear regression performed to estimate the volume of the pharyngeal space showed an R of 0.92 and an adjusted R 2 of 0.8362., Conclusions: There were significant correlations between pharyngeal space volume, and the mandible and hyoid bone measurements, suggesting that the stomatognathic system should be evaluated in an integral and nonindividualized way. Furthermore, it was possible to develop a linear regression model, resulting in a useful formula for estimating the volume of the pharyngeal space., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: The aim of this study was to evaluate the occurrence of pulp stones by cone-beam computed tomography (CBCT) and to correlate their prevalence with patient's gender, location of tooth (right or left of maxillary or mandibular arch), group of teeth, and restorations., Materials and Methods: CBCT images of 382 patients randomly selected from the database of the University Oral Radiology Department were retrospectively examined. A total of 2833 tooth images obtained using the i-CAT 3D Imaging System were evaluated. Image analysis was performed with the i-CAT software, and all teeth were evaluated in sagittal, axial, and coronal views. All the measurements were subjected to chi square test, odds ratio, and Fisher's exact tests (p < 0.05)., Results: The prevalence of pulp stones was similar between patient's genders and tooth locations. Pulp stones were detected in 31.9% of patients and 9.5% of teeth. Maxillary and mandibular molars were the groups of teeth with the highest frequency of pulp stones. The presence of restorations increased the chance of occurrence of pulp stones by 2.1 times in all teeth examined (p < 0.0001) and by 4.7 times in maxillary teeth (p < 0.0001)., Conclusions: Pulp stones had a high prevalence with molar teeth showing the highest prevalence. The presence of restorations increased the chance of occurrence of these calcifications, specifically in maxillary teeth., Clinical Relevance: CBCT provides accurate anatomical details in three dimensions, offering the possibility to view an individual tooth in axial, sagittal, and coronal views. This study performed an investigation of the occurrence of pulp stones by CBCT.

Objectives: The aim of the study was to assess the influence of cone beam computed tomography (CBCT) acquisition parameters on the evaluation of mandibular third molars and their relationship to the mandibular canal., Study Design: Eight dry human mandibles with 13 mandibular third molars were scanned with one CBCT unit. Voxel size (0.2 and 0.3 mm), field of view (FOV) size (12 × 8.5 cm and 5 × 5 cm), and number of basis images (450 and 720) were the variables studied. Two examiners evaluated the images, and the resulting data were compared through McNemar, McNemar-Bowker, and Student t tests. Additionally, dosimetry was determined for all protocols tested, and radiation doses were compared through analysis of variance., Results: The variables did not influence evaluation of mandibular third molars, except for voxel size, when assessing contact between the tooth and the mandibular canal (P = .021). Although FOV and number of basis images affected radiation dose, voxel size did not., Conclusions: FOV size and number of basis images did not influence the evaluation of mandibular third molars and their relationship to the mandibular canal in the CBCT unit used. Conversely, smaller voxel size affected the assessment of contact between the tooth and the mandibular canal. In units in which voxel size does not influence radiation dose, the most appropriate CBCT protocol is the one using a smaller voxel size and delivering the lowest radiation dose to the patient., (Copyright © 2017 Elsevier Inc. All rights reserved.)

This study evaluated the action of ionizing radiation and the possible radioprotective effect of the non-steroidal anti-inflammatory drug meloxicam on the bone physiology of rat mandibles by assessing the alveolar socket healing and bone strength. Forty male Wistar rats were divided in 4 groups (n=10): control (CG), irradiated (IG), meloxicam (MG), meloxicam irradiated (MIG). A dose of 0.2 mg/kg meloxicam was administered to MG and MIG. After this, IG and MIG were irradiated with 15 Gy radiation dose in the mandible. Forty days after the above procedures, the mandibular first molars were extracted and the animals were killed after 15 or 30 days (n=5). Micro-computed tomography and bending test were used to evaluate alveolar socket healing and bone strength, respectively. At 15 days, bone volume, bone volume fraction and trabecular thickness were higher in the CG and MG than in the IG and MIG; and trabecular separation was higher in the IG compared with the others. At 30 days, there was a difference only in trabecular separation, which was higher in IG than in CG and MG, and MIG did not differ from the others. Bone strength was lower in IG compared with CG and MG, and MIG did not differ from the others. In conclusion, the ionizing radiation affected the bone physiology of rat mandibles, delaying the alveolar socket healing and reducing the bone strength. Moreover, the meloxicam had a positive effect on the trabecular separation in alveolar socket healing and on the bone strength.

Purpose: The purpose of this study was to detect the anterior loop of the mental nerve and the mandibular incisive canal in panoramic radiographs (PAN) and cone-beam computed tomography (CBCT) images, as well as to determine the anterior/mesial extension of these structures in panoramic and cross-sectional reconstructions using PAN and CBCT images., Materials and Methods: Images (both PAN and CBCT) from 90 patients were evaluated by 2 independent observers. Detection of the anterior loop and the incisive canal were compared between PAN and CBCT. The anterior/mesial extension of these structures was compared between PAN and both cross-sectional and panoramic CBCT reconstructions., Results: In CBCT, the anterior loop and the incisive canal were observed in 7.7% and 24.4% of the hemimandibles, respectively. In PAN, the anterior loop and the incisive canal were detected in 15% and 5.5% of cases, respectively. PAN presented more difficulties in the visualization of structures. The anterior/mesial extensions ranged from 0.0 mm to 19.0 mm on CBCT. PAN underestimated the measurements by approximately 2.0 mm., Conclusion: CBCT appears to be a more reliable imaging modality than PAN for preoperative workups of the anterior mandible. Individual variations in the anterior/mesial extensions of the anterior loop of the mental nerve and the mandibular incisive canal mean that is not prudent to rely on a general safe zone for implant placement or bone surgery in the interforaminal region.

Aim: Line pairs are the unit for measurement of resolution and are related to the spatial quality of the system. Thus, the objective of this study was to evaluate the influence of number of line pairs in digital intra-oral radiography on the detection accuracy of horizontal root fractures., Materials and Methods: Sixty-four extracted single-root human teeth were used. Thirty-two had horizontal root fractures created and were mounted in dry human mandibles. The teeth were radiographed with two digital receptors: the Digora Optime (14.3 lp mm-1) and the Digora Toto (26.3 lp mm-1). Images were viewed under standardized conditions by 3 calibrated examiners using the respective dedicated software (Digora for Windows 2.6(®) and Scanora(®) ). Digora Toto(®) images were also evaluated through the Digora for Windows 2.6(®) software. The results were statistically analyzed based on the area under the ROC curve for each examiner., Results: Pairing Digora Toto(®) with Scanora(®) allowed for greater accuracy in horizontal root fractures diagnosis, while images acquired with that same system seem to lose accuracy when visualized with Digora for Windows 2.6(®) . Pairing Digora Optime(®) with Digora for Windows 2.6(®) resulted in the lowest accuracy for horizontal root fractures diagnosis., Conclusions: The higher number of line pairs and the consequent higher image resolution provided by the Digora Toto(®) system and its dedicated software seem to enhance the accuracy of horizontal root fractures diagnostic imaging., (© 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: Several studies demonstrate variability of root canal morphology of anterior teeth. This in-vivo study was designed to analyze and characterize root canal morphology of maxillary and mandibular anterior teeth using three-dimensional imaging., Method and Materials: Patients who required CBCT radiographic examinations as part of their routine examination, diagnosis, and treatment planning were enrolled on the study. A total of 1,200 healthy, untreated, fully developed maxillary and mandibular incisors and canines were included. The following observations were recorded: (i) number of roots and their morphology; (ii) number of canals per root; and (iii) primary variations in the morphology of the root canal systems., Results: Root canal morphology of maxillary teeth was consistent with a single canal extending from the pulp chamber to the apex in 98% of the cases. In contrast, in mandibular central and lateral incisors, the presence of a single canal represented 64.5% and 60.5% respectively. The second most common morphology was the presence of one canal leaving the pulp chamber, which divided into two within the root, and then merged to exit as one canal in 18% and 25.5% respectively. The presence of one canal leaving the pulp chamber and dividing short of the apex into two separate and distinct canals with separate apical foramina (variant 5) was recorded in 14.5% and 12% respectively., Conclusion: There was a low incidence of anatomical variation in maxillary anterior teeth. In contrast, mandibular anterior teeth presented with a high prevalence of two canals, especially central and lateral incisors. The reported data may help clinicians understand the variations in root canal morphology of anterior teeth in order to overcome problems associated with shaping and cleaning procedures.

Introduction: This cross-sectional study determined the prevalence of apical radiolucency in 1290 root canal-treated teeth and the correlation between endodontic treatment quality and the presence of coronal restorations with apical radiolucency using cone-beam computed tomographic imaging., Methods: Cone-beam computed tomographic scans were analyzed, and teeth were classified as healthy or diseased according to the periapical status. Other factors were also evaluated for their association with the apical diagnosis including sex, quality of endodontic treatment, presence of coronal restorations and posts, and apical level of filling., Results: Of the treated teeth, 48.83% were classified as healthy. Only 55.11% of the teeth had endodontic treatment rated as adequate. The quality of endodontic treatment and the presence of coronal restoration were statistically correlated with the presence or absence of an apical radiolucency (P < .0001). Combined data revealed that teeth with both adequate endodontic treatment and the presence of coronal restoration showed significantly better apical status than the other combinations (P < .001). Canals filled up to 0-2 mm short of the apex had a significantly higher number of teeth rated as healthy compared with overfilled or underfilled cases (P = .001). The presence of a post was not found to be a statistical significant factor (P = .81)., Conclusions: Data showed a relatively high prevalence of apical radiolucencies in root canal-treated teeth. The quality of the endodontic treatment, the presence of coronal restoration, and apical extent of the root canal filling were significantly associated with healthy apical tissues., (Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Purpose: To determine the height and volume of the mandibular coronoid process (CP) by cone-beam computed tomography (CBCT) and to identify the presence of any correlations of these measurements with age, gender, facial type, and skeletal class., Materials and Methods: The sample consisted of 132 patients from a departmental routine patient base. After CBCT, CP height was determined using OnDemand 3D software (CyberMed, Seoul, Republic of Korea), and CP volume was obtained using ITK-SNAP 3.0 software (Cognitica, Philadelphia, PA). Measurements were subjected to analysis of covariance against facial type, skeletal class, gender, and age, with a significance level of 5%., Results: CP height and volume were similar regardless of age, facial type, and skeletal class. However, the 2 measurements were statistically different regarding gender, with larger values for men than for women., Conclusions: These observations suggest that gender is the only factor influencing the height and volume of the CP., (Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Objectives: To assess the efficacy of lead foils in reducing the radiation dose received by different anatomical sites of the head and neck during periapical intraoral examinations performed with digital systems., Methods: Images were acquired through four different manners: phosphor plate (PSP; VistaScan(®) system; Dürr Dental GmbH, Bissingen, Germany) alone, PSP plus lead foil, complementary metal oxide semiconductor (CMOS; DIGORA(®) Toto, Soredex(®), Tuusula, Finland) alone and CMOS plus lead foil. Radiation dose was measured after a full-mouth periapical series (14 radiographs) using the long-cone paralleling technique. Lithium fluoride (LiF 100) thermoluminescent dosemeters were placed in an anthropomorphic phantom at points corresponding to the tongue, thyroid, crystalline lenses, parotid glands and maxillary sinuses., Results: Dosemeter readings demonstrated the efficacy of the addition of lead foil in the intraoral digital X-ray systems provided in reducing organ doses in the selected structures, approximately 32% in the PSP system and 59% in the CMOS system., Conclusions: The use of lead foils associated with digital X-ray sensors is an effective alternative for the protection of different anatomical sites of the head and neck during full-mouth periapical series acquisition.

The aim of this study was to evaluate the radioprotective and reparative effects of compounds based on aloe vera, zinc, and copper against salivary gland dysfunction in Wistar rats. A total of 150 Wistar rats were randomly divided into 12 groups, in which the animals received aloe vera and/or zinc and copper. In eight of these groups the animals were also subjected to irradiation before or after administration of the substances. After 27 days, sialometry tests were performed. Data were analyzed using ANOVA and the Tukey test (P < 0.05). Rats that had been administered aloe vera before or after irradiation showed a significantly higher salivary flow rate than rats that had been simply irradiated. When both substances were administered, a statistically significant difference in the salivary flow rate was observed in comparison with the irradiation alone group seven days after irradiation. The present results suggest that aloe vera exerts positive protective and reparative effects, and can be considered a potential radioprotective substance.

Introduction: The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging., Methods: Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems., Results: First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables., Conclusions: Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning., (Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: To determine whether cone beam CT (CBCT) enhancement filters influence the diagnosis of longitudinal root fractures., Methods: 40 extracted human posterior teeth were endodontically prepared, and fractures with no separation of fragments were made in 20 teeth of this sample. The teeth were placed in a dry mandible and scanned using a Classic i-CAT® CBCT device (Imaging Sciences International, Inc., Hatfield, PA). Evaluations were performed with and without CBCT filters (Sharpen Mild, Sharpen Super Mild, S9, Sharpen, Sharpen 3 × 3, Angio Sharpen Medium 5 × 5, Angio Sharpen High 5 × 5 and Shadow 3 × 3) by three oral radiologists. Inter- and intraobserver agreement was calculated by the kappa test. Accuracy, sensitivity, specificity and positive and negative predictive values were determined. McNemar test was applied for agreement between all images vs the gold standard and original images vs images with filters (p < 0.05)., Results: Means of intraobserver agreement ranged from good to excellent. Angio Sharpen Medium 5 × 5 filter obtained the highest positive predictive value (80.0%) and specificity value (76.5%). Angio Sharpen High 5 × 5 filter obtained the highest sensitivity (78.9%) and accuracy (77.5%) value. Negative predictive value was the highest (82.9%) for S9 filter. The McNemar test showed no statistically significant differences between images with and without CBCT filters (p > 0.05)., Conclusions: Although no statistical differences was observed in the diagnosis of root fractures when using filters, these filters seem to improve diagnostic capacity for longitudinal root fractures. Further in vitro studies with endodontic-treated teeth and research in vivo should be considered.

Introduction: The aim of this study was to analyze and characterize root canal morphology of mandibular molars of the Brazilian population by using cone-beam computed tomography (CBCT)., Methods: Patients who required CBCT radiographic examinations as part of their routine examination, diagnosis, and treatment planning were enrolled in the study. A total of 460 healthy, untreated, fully developed mandibular first and second molars were included (234 first molars and 226 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) C-shaped canals, and (4) primary variations in the morphology of the root canal systems., Results: First molars showed a higher prevalence of 2 canals in the mesial root and 1 in the distal root with 2 separate roots (74%). In the mandibular second molars, the presence of 2 separate roots with 2 canals in the mesial root and 1 canal in the distal root represented 54% of the total. In 32% of the cases, 2 separate roots with 1 canal each in the mesial and distal roots were presented. The incidence of C-shaped canals was 1.7% of first molars and 3.5% of second molars., Conclusions: A higher prevalence of 2 separate roots with 2 canals in the mesial root and 1 canal in the distal root was observed in mandibular first and second molars (74% and 54%, respectively). Also, a lower incidence of C-shaped canals and 3-rooted teeth was observed in a Brazilian population. CBCT is a clinically useful tool for endodontic diagnosis and treatment., (Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

A radiographic interpretation is essential to the diagnosis of invasive cervical resorption (ICR) and the difficulty in distinguishing this lesion from internal root resorption has been highlighted in the literature. This paper reports the use of cone beam computed tomography (CBCT) in the diagnosis of ICR. The cases reports describe how CBCT can be used to make a differential diagnosis and also show that the use of this technology can provide relevant information on the location and nature of root resorption, which conventional radiographs cannot. As a result, the root canal treatment was not initially considered. The patients will be monitored and will undergo a scan after a short period of time to detect any small changes. It was observed that both cases benefited from CBCT in the diagnosis of ICR, because this imaging modality determined the real extent of resorption and possible points of communication with the periodontal space.