Search

In automotive infotainment systems, vehicles using the applications are serviced via continuous infrastructure-to-vehicle (I2V) communications. Additionally, the I2V communications can be combined with vehicle-to-vehicle (V2V) connectivity owing to the small area covered by road side units (RSUs). However, dozens of vehicles have to compete for limited bandwidth when they request service simultaneously in the covered area. In this paper, we propose a joint scheduling and power control scheme for I2V and V2V links in the RSUs’ coverage range. Mapping the I2V and V2V links to tuple-links, we formulate a mixed-integer nonlinear programming (MINLP) problem where frequency scheduler and power controller for those tuple-links are jointly designed. Then, we employ the delayed column generation technique and the transmission pattern definition to decompose the MINLP problem into a transmission pattern scheduling problem, as well as a power control problem. Therein, the transmission pattern scheduling problem is solved by linear programming while a greedy power control algorithm is developed. Simulation results with practical parameter settings show that our proposed scheme outperforms several conventional schemes in terms of service disruption and achieved throughput while maintaining throughput fairness among the requesting vehicles. In particular, a high channel number, a small power level number, and a large buffer size at the requesting vehicles are shown to be helpful for our proposed scheme. [ABSTRACT FROM AUTHOR]

This paper aims to maximize the spectral and energy efficiencies of a content-centric cloud radio access network (C-RAN), where users requesting the same contents are grouped together. Data are transferred from a central baseband unit to multiple remote radio heads (RRHs) equipped with local caches. The RRHs then send the received data to each group’s user. Both multicast and unicast schemes are considered for data transmission. We formulate mixed-integer nonlinear problems in which user association, RRH activation, data rate allocation, and signal precoding are jointly designed. These challenging problems are subject to minimum data rate requirements, limited fronthaul capacity, and maximum RRH transmit power. Employing successive convex quadratic programming, we propose iterative algorithms with guaranteed convergence to Fritz John solutions. Numerical results confirm that the proposed joint designs markedly improve the spectral and energy efficiencies of the considered content-centric C-RAN compared to benchmark schemes. Importantly, they show that unicasting outperforms multicasting in terms of spectral efficiency in both cache and cache-less scenarios. In terms of energy efficiency, multicasting is the best choice for the system without cache whereas unicasting is best for the system with cache. Finally, edge caching is shown to improve both spectral and energy efficiencies. [ABSTRACT FROM AUTHOR]

This paper first considers a multicell network deployment where the base station (BS) of each cell communicates with its cell-edge user with the assistance of an amplify-and-forward (AF) relay node. Equipped with a power splitter and a wireless energy harvester, the self-sustaining relay scavenges radio-frequency (RF) energy from the received signals to process and forward information. Our aim is to develop a resource allocation scheme that jointly optimizes 1) BS transmit power, 2) received power-splitting factors for energy harvesting and information processing at the relays, and 3) relay transmit power. In the face of strong intercell interference and limited radio resources, we formulate three highly nonconvex problems with the objectives of sum-rate maximization, max-min throughput fairness, and sum-power minimization. To solve such challenging problems, we propose applying the successive convex approximation approach and devising iterative algorithms based on geometric programming and difference-of-convex-function programming. The proposed algorithms transform the nonconvex problems into a sequence of convex problems, each of which is solved very efficiently by the interior-point method. We prove that our algorithms converge to the locally optimal solutions that satisfy the Karush–Kuhn–Tucker (KKT) conditions of the original nonconvex problems. We then extend our results to the case of decode-and-forward (DF) relaying with variable timeslot durations. We show that our resource allocation solutions in this case offer better throughput than that of the AF counterpart with equal timeslot durations, albeit at higher computational complexity. Numerical results confirm that the proposed joint optimization solutions substantially improve network performance, compared with cases where the radio resource parameters are individually optimized. [ABSTRACT FROM AUTHOR]

This paper presents new design formulations that aim at optimizing the performance of an orthogonal frequency-division multiple-access (OFDMA) ad hoc cognitive radio network through joint subcarrier assignment and power allocation. Aside from an important constraint on the tolerable interference induced to primary networks, to efficiently implement spectrum-sharing control within the unlicensed network, the optimization problems considered here strictly enforce upper and lower bounds on the total amount of temporarily available bandwidth that is granted to individual secondary users. These new requirements are of particular relevance in cognitive radio settings, where the spectral activities of primary users are highly dynamic, leaving little opportunity for secondary access. A dual decomposition framework is then developed for two criteria (throughput maximization and power minimization), which gives rise to the realization of distributed solutions. Because the proposed distributed protocols require very limited cooperation among the participating network elements, they are particularly applicable to ad hoc cognitive networks, where centralized processing and control are certainly inaccessible. In this paper, we recommend that the network collaboration is made possible through the implementation of virtual timers at individual secondary users and through the exchange of pertinent information over a common reserved channel. It is shown that not only is the computational complexity of the devised algorithms affordable but that the performance of these algorithms in practical scenarios attains the actual global optimum as well. The potential of the proposed approaches is thoroughly verified by asymptotic complexity analysis and numerical results. [ABSTRACT FROM PUBLISHER]

Information and energy can be transferred over the same radio-frequency channel. In the power-splitting (PS) mode, they are simultaneously transmitted using the same signal by the base station (BS) and later separated at the user (UE)’s receiver by a power splitter. In the time-switching (TS) mode, they are either transmitted separately in time by the BS or received separately in time by the UE. In this paper, the BS transmit beamformers are jointly designed with either the receive PS ratios or the transmit TS ratios in a multicell network that implements wireless information and power transfer (WIPT). Imposing UE-harvested energy constraints, the design objectives include: 1) maximizing the minimum UE rate under the BS transmit power constraint, and 2) minimizing the maximum BS transmit power under the UE data rate constraint. New iterative algorithms of low computational complexity are proposed to efficiently solve the formulated difficult nonconvex optimization problems, where each iteration either solves one simple convex quadratic program or one simple second-order-cone-program. Simulation results show that these algorithms converge quickly after only a few iterations. Notably, the transmit TS-based WIPT system is not only more easily implemented but outperforms the receive PS-based WIPT system as it better exploits the beamforming design at the transmitter side. [ABSTRACT FROM PUBLISHER]

This paper designs jointly optimal linear precoders for both base stations (BSs) and users in a multiuser multi-input multi-output (MU-MIMO) multicell network. The BSs are full-duplexing transceivers while uplink users and downlink users (DLUs) are equipped with multiple antennas. Here, the network quality-of-service (QoS) requirement is expressed in terms of the minimum throughput at the BSs and DLUs. We consider the problems of either QoS-constrained sum throughput maximization or minimum cell throughput maximization. Due to the nonconcavity of the throughput functions, the optimal solutions of these two problems remain unknown in both half-duplexing and full-duplexing networks. The first problem has a nonconcave objective and a nonconvex feasible set, whereas the second problem has a nonconcave and nonsmooth objective. To solve such challenging optimization problems, we develop iterative low-complexity algorithms that only invoke one simple convex quadratic program at each iteration. Since the objective value is proved to iteratively increase, our path-following algorithms converge at least to the local optimum of the original nonconvex problems. Due to their guaranteed convergence, simple implementation, and low complexity, the devised algorithms lend themselves to practical precoder designs for large-scale full-duplex MU-MIMO multicell networks. Numerical results demonstrate the advantages of our successive convex quadratic programming framework over existing solutions. [ABSTRACT FROM AUTHOR]

In this paper, we propose joint sequencing and scheduling optimization for uplink machine-type communication (MTC). We consider multiple energy-constrained MTC devices that transmit data to a base station following the time division multiple access (TDMA) protocol. Conventionally, the energy efficiency performance in TDMA is optimized through multi-user scheduling, i.e., changing the transmission block length allocated to different devices. In such a system, the sequence of devices for transmission, i.e., who transmits first and who transmits second, etc., has not been considered as it does not have any impact on the energy efficiency. In this work, we consider that data compression is performed before transmission and show that the multi-user sequencing is indeed important. We apply three popular energy-minimization system objectives, which differ in terms of the overall system performance and fairness among the devices. We jointly optimize both multi-user sequencing and scheduling along with the compression and transmission rate control. Our results show that multi-user sequence optimization significantly improves the energy efficiency performance of the system. Notably, it makes the TDMA-based multi-user transmissions more likely to be feasible in the lower latency regime, and the performance gain is larger when the delay bound is stringent. [ABSTRACT FROM AUTHOR]

Cooperative wireless multicast is investigated, in which a source sends multicast messages to a number of users. For a multicast message from the source, some users do not successfully receive the message (called unsuccessful users). For a successful user (who successfully receives the message from the source), we define its worst relaying channel gain as the smallest channel gain among its channel gains to all unsuccessful users. It is proposed that the successful user whose worst relaying channel gain is the highest among the worst relaying channel gains of all successful users is selected to serve as a relay. Considering that the channels in the system are independent but nonidentically distributed Rayleigh fading, we derive a closed-form outage probability expression for the proposed scheme. It is shown that the proposed scheme can achieve full diversity, and thus, having a larger number of users can improve the outage performance. Furthermore, we study the time allocation strategy that determines the durations used by the source and the selected relay for their transmissions, respectively. An approximate optimal time allocation is derived. In addition, we also investigate the case with relay selection error and the case with mixed Rayleigh/Rician fading. Simulation results verify the performance of the proposed cooperative multicast scheme and time allocation strategy. [ABSTRACT FROM AUTHOR]

It is known that the design of optimal transmit beamforming vectors for cognitive radio multicast transmission can be formulated as indefinite quadratic optimization programs. Given the challenges of such nonconvex problems, the conventional approach in literature is to recast them as convex semidefinite programs (SDPs) together with rank-one constraints. Then, these nonconvex and discontinuous constraints are dropped allowing for the realization of a pool of relaxed candidate solutions, from which various randomization techniques are utilized with the hope to recover the optimal solutions. However, it has been shown that such approach fails to deliver satisfactory outcomes in many practical settings, wherein the determined solutions are found to be unacceptably far from the actual optimality. On the contrary, we in this contribution tackle the aforementioned optimal beamforming problems differently by representing them as SDPs with additional reverse convex (but continuous) constraints. Nonsmooth optimization algorithms are then proposed to locate the optimal solutions of such design problems in an efficient manner. Our thorough numerical examples verify that the proposed algorithms offer almost global optimality whilst requiring relatively low computational load. [ABSTRACT FROM AUTHOR]