Search

Major mergers are considered to be a significant source of turbulence in clusters. We performed a numerical simulation of a major merger event using nested-grid initial conditions, adaptive mesh refinement, radiative cooling of primordial gas, and a homogeneous ultraviolet background. By calculating the microscopic viscosity on the basis of various theoretical assumptions and estimating the Kolmogorov length from the turbulent dissipation rate computed with a subgrid-scale model, we are able to demonstrate that most of the warm-hot intergalactic medium can sustain a fully turbulent state only if the magnetic suppression of the viscosity is considerable. Accepting this as premise, it turns out that ratios of turbulent and thermal quantities change only little in the course of the merger. This confirms the tight correlations between the mean thermal and non-thermal energy content for large samples of clusters in earlier studies, which can be interpreted as second self-similarity on top of the self-similarity for different halo masses. Another long-standing question is how and to which extent turbulence contributes to the support of the gas against gravity. From a global perspective, the ratio of turbulent and thermal pressures is significant for the clusters in our simulation. On the other hand, a local measure is provided by the compression rate, i.e. the growth rate of the divergence of the flow. Particularly for the intracluster medium, we find that the dominant contribution against gravity comes from thermal pressure, while compressible turbulence effectively counteracts the support. For this reason it appears to be too simplistic to consider turbulence merely as an effective enhancement of thermal energy., Comment: 16 pages, 16 figures, accepted for publication by MNRAS

Baryonic streaming motions produced prior to the epoch of recombination became supersonic during the cosmic dark ages. Various studies suggest that such streaming velocities change the halo statistics and also influence the formation of Population III stars. In this study, we aim to explore the impact of streaming velocities on the formation of supermassive black holes at $z>10$ via the direct collapse scenario. To accomplish this goal, we perform cosmological large eddy simulations for two halos of a few times $\rm 10^{7} M_{\odot}$ with initial streaming velocities of 3, 6 and 9 $\rm km/s$. These massive primordial halos illuminated by the strong Lyman Werner flux are the potential cradles for the formation of direct collapse seed black holes. To study the evolution for longer times, we employ sink particles and track the accretion for 10,000 years. Our findings show that higher streaming velocities increase the circular velocities from about 14 $\rm km/s$ to 16 $\rm km/s$. They also delay the collapse of halos for a few million years, but do not have any significant impact on the halo properties such as turbulent energy, radial velocity, density and accretion rates. Sink particles of about $\rm \sim 10^5 M_{\odot}$ are formed at the end of our simulations and no clear distribution of sink masses is observed in the presence of streaming motions. It is further found that the impact of streaming velocities is less severe in massive halos compared to the minihalos as reported in the previous studies., Comment: Matches the accepted vesion, to be appeared MNRAS

We investigate turbulence generated by cosmological structure formation by means of large eddy simulations using adaptive mesh refinement. In contrast to the widely used implicit large eddy simulations, which resolve a limited range of length scales and treat the effect of turbulent velocity fluctuations below the grid scale solely by numerical dissipation, we apply a subgrid-scale model for the numerically unresolved fraction of the turbulence energy. For simulations with adaptive mesh refinement, we utilize a new methodology that allows us to adjust the scale-dependent energy variables in such a way that the sum of resolved and unresolved energies is globally conserved. We test our approach in simulations of randomly forced turbulence, a gravitationally bound cloud in a wind, and the Santa Barbara cluster. To treat inhomogeneous turbulence, we introduce an adaptive Kalman filtering technique that separates turbulent velocity fluctuations on resolved length scales from the non-turbulent bulk flow. From the magnitude of the fluctuating component and the subgrid-scale turbulence energy, a total turbulent velocity dispersion of several 100 km/s is obtained for the Santa Barbara cluster, while the low-density gas outside the accretion shocks is nearly devoid of turbulence. The energy flux through the turbulent cascade and the dissipation rate predicted by the subgrid-scale model correspond to dynamical time scales around 5 Gyr, independent of numerical resolution., Comment: 29 pages, 31 figures, revised version accepted for publication by MNRAS

Black holes of a billion solar masses are observed in the infant universe a few hundred million years after the Big Bang. The direct collapse of protogalactic gas clouds in primordial halos with $\rm T_{vir} \geq 10^{4} K$ provides the most promising way to assemble massive black holes. In this study, we aim to determine the characteristic mass scale of seed black holes and the time evolution of the accretion rates resulting from the direct collapse model. We explore the formation of supermassive black holes via cosmological large eddy simulations (LES) by employing sink particles and following their evolution for twenty thousand years after the formation of the first sink. As the resulting protostars were shown to have cool atmospheres in the presence of strong accretion, we assume here that UV feedback is negligible during this calculation. We confirm this result in a comparison run without sinks. Our findings show that black hole seeds with characteristic mass of $\rm 10^{5} M_{\odot}$ are formed in the presence of strong Lyman Werner flux which leads to an isothermal collapse. The characteristic mass is a about two times higher in LES compared to the implicit large eddy simulations (ILES). The accretion rates increase with time and reach a maximum value of 10 $\rm M_{\odot}/yr$ after $\rm 10^{4}$ years. Our results show that the direct collapse model is clearly feasible as it provides the expected mass of the seed black holes., Comment: Accepted for publication in MNRAS. Comments are welcome

Population III stars forming in the infant universe at z=30 heralded the end of the cosmic dark ages. They are presumed to be assembled in so-called minihaloes with virial temperatures of a few thousand K where collapse is triggered by molecular hydrogen cooling. A central question concerns their final masses, and whether fragmentation occurs during their formation. While studies employing Lagrangian codes suggest fragmentation via a self-gravitating disk, recent high resolution simulations indicated that disk formation is suppressed. Here we report the first high-resolution large-eddy simulations performed with the Eulerian grid-based code Enzo following the evolution beyond the formation of the first peak, to investigate the accretion of the central massive clump and potential fragmentation. For a total of 3 halos, we see that a disk forms around the first clump. The central clump reaches $\sim10$ solar masses after 40 years, while subsequent accretion is expected at a rate of $10^{-2}$ solar masses per year. In one of these halos, additional clumps form as a result of fragmentation which proceeds at larger scales. We note that subgrid-scale turbulence yields relevant contributions to the stability of the protostellar disks. We conclude that the first protostar may reach masses up to $\rm 40-100 M_{\odot}$, which are only limited by the effect of radiative feedback., Comment: Accepted for publication in APJL, comments are welcome

Supermassive black holes with up to a $\rm 10^{9}~M_{\odot}$ dwell in the centers of present-day galaxies, and their presence has been confirmed at z $\geq$ 6. Their formation at such early epochs is still an enigma. Different pathways have been suggested to assemble supermassive black holes in the first billion years after the Big Bang. Direct collapse has emerged as a highly plausible scenario to form black holes as it provides seed masses of $\rm 10^{5}-10^{6}~M_{\odot}$. Gravitational collapse in atomic cooling haloes with virial temperatures T$_{vir} \geq 10^{4}$~K may lead to the formation of massive seed black holes in the presence of an intense background UV flux. Turbulence plays a central role in regulating accretion and transporting angular momentum. We present here the highest resolution cosmological large-eddy simulations to date which track the evolution of high-density regions on scales of $0.25$~AU beyond the formation of the first peak, and study the impact of subgrid-scale turbulence. The peak density reached in these simulations is $\rm 1.2 \times 10^{-8}~g~cm^{-3}$. Our findings show that while fragmentation occasionally occurs, it does not prevent the growth of a central massive object resulting from turbulent accretion and occasional mergers. The central object reaches $\rm \sim 1000~M_{\odot}$ within $4$ free-fall times, and we expect further growth up to $\rm 10^{6}~M_{\odot}$ through accretion in about 1 million years. The direct collapse model thus provides a viable pathway of forming high-mass black holes at early cosmic times., Comment: Accepted for publication in MNRAS, Accepted 2013 May 9. Received 2013 May 8; in original form 2013 April 3

The Square Kilometre Array (SKA) is the most ambitious radio telescope ever planned. With a collecting area of about a square kilometre, the SKA will be far superior in sensitivity and observing speed to all current radio facilities. The scientific capability promised by the SKA and its technological challenges provide an ideal base for interdisciplinary research, technology transfer, and collaboration between universities, research centres and industry. The SKA in the radio regime and the European Extreme Large Telescope (E-ELT) in the optical band are on the roadmap of the European Strategy Forum for Research Infrastructures (ESFRI) and have been recognised as the essential facilities for European research in astronomy. This "White Paper" outlines the German science and R&D interests in the SKA project and will provide the basis for future funding applications to secure German involvement in the Square Kilometre Array., Comment: Editors: H. R. Kl\"ockner, M. Kramer, H. Falcke, D.J. Schwarz, A. Eckart, G. Kauffmann, A. Zensus; 150 pages (low resolution- and colour-scale images), published in July 2012, language English (including a foreword and an executive summary in German), the original file is available via the MPIfR homepage

While present standard model of cosmology yields no clear prediction for the initial magnetic field strength, efficient dynamo action may compensate for initially weak seed fields via rapid amplification. In particular, the small-scale dynamo is expected to exponentially amplify any weak magnetic field in the presence of turbulence. We explore whether this scenario is viable using cosmological magneto-hydrodynamics simulations modeling the formation of the first galaxies, which are expected to form in so-called atomic cooling halos with virial temperatures $\rm T_{vir} \geq 10^{4}$ K. As previous calculations have shown that a high Jeans resolution is needed to resolve turbulent structures and dynamo effects, our calculations employ resolutions of up to 128 cells per Jeans length. The presence of the dynamo can be clearly confirmed for resolutions of at least 64 cells per Jeans length, while saturation occurs at approximate equipartition with turbulent energy. As a result of the large Reynolds numbers in primordial galaxies, we expect saturation to occur at early stages, implying magnetic field strengths of \sim0.1 $\mu$G at densities of 10^4 cm^{-3}., Comment: Matches the accepted version to be appeared in MNRAS

Atomic cooling haloes with virial temperatures $\rm T_{vir} \geq 10^{4}$ K are the most plausible sites for the formation of the first galaxies and the first intermediate mass black holes. It is therefore important to assess whether one can obtain robust results concerning their main properties from numerical simulations. A major uncertainty is the presence of turbulence, which is barely resolved in cosmological simulations. We explore the latter both by pursuing high-resolution simulations with up to 64 cells per Jeans length and by incorporating a subgrid-scale turbulence model to account for turbulent pressure and viscosity on unresolved scales. We find that the main physical quantities in the halo, in particular the density, temperature and energy density profile, are approximately converged. However, the morphologies in the central 500 AU change significantly with increasing resolution and appear considerably more turbulent. In a systematic comparison of three different haloes, we further found that the turbulence subgrid-scale model gives rise to more compact central structures, and decreases the amount of vorticity. Such compact morphologies may in particular favor the accretion onto the central object., Comment: 12 pages, 6 figures, matches the accepted version to be published in MNRAS; Accepted 2012 December 18. Received 2012 December 6; in original form 2012 October 5

FEARLESS (Fluid mEchanics with Adaptively Refined Large Eddy SimulationS) is a numerical scheme for modelling subgrid-scale turbulence in cosmological adaptive mesh refinement simulations. In this contribution, the main features of this tool will be outlined. We discuss the application of this method to cosmological simulations of the large-scale structure. The simulations show that the production of turbulence has a different redshift dependence in the intra-cluster medium and the warm-hot intergalactic medium, caused by the distinct stirring mechanisms (mergers and shock interactions) acting in them. Some properties of the non-thermal pressure support in the two baryon phases are also described., Comment: 4 pages, 1 figure, proceedings of "Advances in Computational Astrophysics: methods, tools and outcomes", Cefal\`u (Italy), June 2011, to appear in ASP Conf. Series

The injection and evolution of turbulence in the intergalactic medium is studied by means of mesh-based hydrodynamical simulations, including a subgrid scale (SGS) model for small-scale unresolved turbulence. The simulations show that the production of turbulence has a different redshift dependence in the intracluster medium (ICM) and the warm-hot intergalactic medium (WHIM). We show that turbulence in the ICM is produced chiefly by merger-induced shear flows, whereas the production in the WHIM is dominated by shock interactions. Secondly, the effect of dynamical pressure support on the gravitational contraction has been studied. This turbulent support is stronger in the WHIM gas at baryon overdensities 1 < delta < 100, and less relevant for the ICM. Although the relative mass fraction of the gas with large vorticity is considerable (52% in the ICM), we find that for only about 10% in mass this is dynamically relevant, namely not associated to an equally large thermal pressure support. According to this result, a significant non-thermal pressure support counteracting the gravitational contraction is a localised characteristic in the cosmic flow, rather than a widespread feature., Comment: 14 pages, 11 figure. MNRAS, accepted

Context: The thermal instability is one of the dynamical agents for turbulence in the diffuse interstellar medium, where both, turbulence and thermal instability interact in a highly non-linear manner. Aims: We study basic properties of turbulence in thermally bistable gas for variable simulation parameters. The resulting cold gas fractions can be applied as parameterisation in simulations on galactic scales. Methods: Turbulent flow is induced on large scales by means of compressive stochastic forcing in a periodic box. The compressible Euler equations with constant UV heating and a parameterised cooling function are solved on uniform grids. We investigate several values of the mean density of the gas and different magnitudes of the forcing. For comparison with other numerical studies, solenoidal forcing is applied as well. Results: After a transient phase, we observe that a state of statistically stationary turbulence is approached. Compressive forcing generally produces a two-phase medium, with a decreasing fraction of cold gas for increasing forcing strength. This behaviour can be explained on the basis of turbulent mixing. We also find indications for power-law tails of probability density functions of the gas density. Solenoidal forcing, on the other hand, appears to prevent the evolution into a two-phase-medium for certain parameter regions. Conclusions: The dynamics of thermally bistable turbulence shows a substantial sensitivity on the initial state and the forcing properties., Comment: 13 pages, 12 figures, accepted for publication in Astronomy and Astrophysics, updated to final version

The delayed detonation model describes the observational properties of the majority of type Ia supernovae very well. Using numerical data from a three-dimensional deflagration model for type Ia supernovae, the intermittency of the turbulent velocity field and its implications on the probability of a deflagration-to-detonation (DDT) transition are investigated. From structure functions of the turbulent velocity fluctuations, we determine intermittency parameters based on the log-normal and the log-Poisson models. On the other hand, the analysis of the turbulent velocity fluctuations in the vicinity of the flame front by Roepke suggests a much higher probability of large velocity fluctuations on the grid scale in comparison to the log-normal intermittency model. Following Pan et al., we computed probability density functions for a DDT for the different distributions. Assuming that a DDT can occur in the stirred flame regime, as proposed by Woosley et al., the log-normal model would imply a delayed detonation between 0.7 and 0.8 seconds after the beginning of the deflagration phase for the multi-spot ignition scenario used in the simulation. However, the probability drops to virtually zero if a DDT is further constrained by the requirement that the turbulent velocity fluctuations reach about 500 km/s. Under this condition, delayed detonations are only possible if the distribution of the velocity fluctuations is not log-normal. From our calculations follows that the distribution obtained by Roepke allow for multiple DDTs around 0.8 seconds after ignition at a transition density close to 1x10^7 g/cm^3., Comment: 33 pages, 10 figures, submitted to ApJ

Context: Turbulent deflagrations of Chandrasekhar mass White Dwarfs are commonly used to model Type Ia Supernova explosions. In this context, rapid rotation of the progenitor star is plausible but has so far been neglected. Aims: The aim of this work is to explore the influence of rapid rotation on the deflagration scenario. Methods: We use three dimensional hydrodynamical simulations to model turbulent deflagrations ignited within a variety of rapidly rotating CO WDs obeying rotation laws suggested by accretion studies. Results: We find that rotation has a significant impact on the explosion. The flame develops a strong anisotropy with a preferred direction towards the stellar poles, leaving great amounts of unburnt matter along the equatorial plane. Conclusions: The large amount of unburnt matter is contrary to observed spectral features of SNe Ia. Thus, rapid rotation of the progenitor star and the deflagration scenario are incompatible in order to explain SNe Ia., Comment: 13 pages, 10 figures, accepted for publication by A&A

FEARLESS (Fluid mEchanics with Adaptively Refined Large Eddy SimulationS) is a new numerical scheme arising from the combined use of subgrid scale (SGS) model for turbulence at the unresolved length scales and adaptive mesh refinement (AMR) for resolving the large scales. This tool is especially suitable for the study of turbulent flows in strongly clumped media. In this contribution, the main features of FEARLESS are briefly outlined. We then summarize the main results of FEARLESS cosmological simulations of galaxy cluster evolution. In clusters, the production of turbulence is closely correlated with merger events; for minor mergers, we find that turbulent dissipation affects the cluster energy budget only locally. The level of entropy in the cluster core is enhanced in FEARLESS simulations, in accord with a better modeling of the unresolved flow, and with its feedback on the resolved mixing in the ICM., Comment: To appear in the proceedings of the "Invisible Universe International Conference"

We present a numerical scheme for modelling unresolved turbulence in cosmological adaptive mesh refinement codes. As a first application, we study the evolution of turbulence in the intra-cluster medium and in the core of a galaxy cluster. Simulations with and without subgrid scale model are compared in detail. Since the flow in the ICM is subsonic, the global turbulent energy contribution at the unresolved length scales is smaller than 1% of the internal energy. We find that the production of turbulence is closely correlated with merger events occurring in the cluster environment, and its dissipation locally affects the cluster energy budget. Because of this additional source of dissipation, the core temperature is larger and the density is smaller in the presence of subgrid scale turbulence than in the standard adiabatic run, resulting in a higher entropy core value., Comment: Submitted to ApJ, 14 pages, 14 figures, 3 tables

We reconsider the dark matter problem in supersymmetric models with gauge mediated supersymmetry breaking, with and without R-parity breaking. In these classes of models, a light gravitino forms the dark matter.Consistency with the experimental data, in particular the dark matter abundance and the small-scale power spectrum, requires additional entropy production after the decoupling of the gravitino from the thermal bath. We demonstrate that the usual mechanism via messenger number violating interactions does not work in models where the messenger belongs to SU (5) representations. This is mainly a consequence of two facts: (i) there are at least two different types of lightest messenger particles and (ii) the lightest messenger particle with SU (2) quantum numbers decays dominantly into vector bosons once messenger number is broken, a feature which has been overlooked so far. In case of SO(10) messenger multiplets we find scenarios which work if the SM gauge singlet component is rather light., Comment: 9 pages, 5 figures

We analyze the statistical properties of the turbulent velocity field in the deflagration model for Type Ia supernovae. In particular, we consider the question of whether turbulence is isotropic and consistent with the Kolmogorov theory at small length scales. Using numerical data from a high-resolution simulation of a thermonuclear supernova explosion, spectra of the turbulence energy and velocity structure functions are computed. We show that the turbulent velocity field is isotropic at small length scales and follows a scaling law that is consistent with the Kolmogorov theory until most of the nuclear fuel is burned. At length scales greater than a certain characteristic scale, turbulence becomes anisotropic. Here, the radial velocity fluctuations follow the scaling law of the Rayleigh-Taylor instability, whereas the angular component still obeys Kolmogorov scaling. In the late phase of the explosion, this characteristic scale drops below the numerical resolution of the simulation. The analysis confirms that a subgrid-scale model for the unresolved turbulence energy is required for the consistent calculation of the flame speed in deflagration models of Type Ia supernovae, and that the assumption of isotropy on these scales is appropriate., Comment: 7 pages with 16 figures, submitted to ApJ

The development of turbulent gas flows in the intra-cluster medium and in the core of a galaxy cluster is studied by means of adaptive mesh refinement (AMR) cosmological simulations. A series of six runs was performed, employing identical simulation parameters but different criteria for triggering the mesh refinement. In particular, two different AMR strategies were followed, based on the regional variability of control variables of the flow and on the overdensity of subclumps, respectively. We show that both approaches, albeit with different results, are useful to get an improved resolution of the turbulent flow in the ICM. The vorticity is used as a diagnostic for turbulence, showing that the turbulent flow is not highly volume-filling but has a large area-covering factor, in agreement with previous theoretical expectations. The measured turbulent velocity in the cluster core is larger than 200 km/s, and the level of turbulent pressure contribution to the cluster hydrostatic equilibrium is increased by using the improved AMR criteria., Comment: 13 pages, 14 figures, accepted for publication in MNRAS. Section 4.3.1 (convergence tests of the AMR criteria) and further minor changes added during the reviewing stage. Errors have been corrected in Table 3, but the conclusions are not affected

The problem of the resolution of turbulent flows in adaptive mesh refinement (AMR) simulations is investigated by means of 3D hydrodynamical simulations in an idealised setup, representing a moving subcluster during a merger event. AMR simulations performed with the usual refinement criteria based on local gradients of selected variables do not properly resolve the production of turbulence downstream of the cluster. Therefore we apply novel AMR criteria which are optimised to follow the evolution of a turbulent flow. We demonstrate that these criteria provide a better resolution of the flow past the subcluster, allowing us to follow the onset of the shear instability, the evolution of the turbulent wake and the subsequent back-reaction on the subcluster core morphology. We discuss some implications for the modelling of cluster cold fronts., Comment: 11 pages, 14 figures. Small changes to match the version accepted by MNRAS

The onset of the thermonuclear runaway in a Chandrasekhar-mass white dwarf, leading to the explosion as a type Ia supernova, is studied with hydrodynamical simulations. We investigate the evolution of temperature fluctuations (``bubbles'') in the WD's convective core by means of 2D numerical simulations. We show how the occurrence of the thermonuclear runaway depends on various bubble parameters. The relevance of the progenitor's composition for the ignition process is also discussed., Comment: 4 pages, 2 figures, proceedings of the Catania Workshop on Nuclear and Neutrino Astrophysics (WNNA 2007)

A simulation of the thermonuclear explosion of a Chandrasekhar-mass C+O white dwarf, the most popular scenario of a type Ia supernova (SN Ia), is presented. The underlying modeling is pursued in a self-consistent way, treating the combustion wave as a turbulent deflagration using well tested methods developed for laboratory combustion and based on the concept of `large eddy simulations' (LES). Such consistency requires to capture the onset of the turbulent cascade on resolved scales. This is achieved by computing the dynamical evolution on a 1024$^3$ moving grid, which resulted in the best-resolved three-dimensional SN Ia simulation carried out thus far, reaching the limits of what can be done on present supercomputers. Consequently, the model has no free parameters other than the initial conditions at the onset of the explosion, and therefore it has considerable predictive power. Our main objective is to determine to which extent such a simulation can account for the observations of normal SNe Ia. Guided by previous simulations with less resolution and a less sophisticated flame model, initial conditions were chosen that yield a reasonably strong explosion and a sufficient amount of radioactive nickel for a bright display. We show that observables are indeed matched to a reasonable degree. In particular, good agreement is found with the light curves of normal SNe Ia. Moreover, the model reproduces the general features of the abundance stratification as inferred from the analysis of spectra. This indicates that it captures the main features of the explosion mechanism of SNe Ia. However, we also show that even a seemingly best-choice pure deflagration model has shortcomings that indicate the need for a different mode of nuclear burning at late times, perhaps the transition to a detonation at low density., Comment: 8 pages, 5 figures, accepted for publication in the ApJ

Aims: We present the first full-star three-dimensional explosion simulations of thermonuclear supernovae including parameterized deflagration-to-detonation transitions that occur once the flame enters the distributed burning regime. Methods: Treating the propagation of both the deflagration and the detonation waves in a common front-tracking approach, the detonation is prevented from crossing ash regions. Results: Our criterion triggers the detonation wave at the outer edge of the deflagration flame and consequently it has to sweep around the complex structure and to compete with expansion. Despite the impeded detonation propagation, the obtained explosions show reasonable agreement with global quantities of observed type Ia supernovae. By igniting the flame in different numbers of kernels around the center of the exploding white dwarf, we set up three different models shifting the emphasis from the deflagration phase to the detonation phase. The resulting explosion energies and iron group element productions cover a large part of the diversity of type Ia supernovae. Conclusions: Flame-driven deflagration-to-detonation transitions, if hypothetical, remain a possibility deserving further investigation., Comment: 4 pages, 1 figure

In the context of explosion models for Type Ia Supernovae, we present one- and two-dimensional simulations of fully resolved detonation fronts in degenerate C+O White Dwarf matter including clumps of previously burned material. The ability of detonations to survive the passage through sheets of nuclear ashes is tested as a function of the width and composition of the ash region. We show that detonation fronts are quenched by microscopically thin obstacles with little sensitivity to the exact ash composition. Front-tracking models for detonations in macroscopic explosion simulations need to include this effect in order to predict the amount of unburned material in delayed detonation scenarios., Comment: 6 pages, 9 figures, uses isotope.sty, accepted for publication in A&A

The dynamics of the explosive burning process is highly sensitive to the flame speed model in numerical simulations of type Ia supernovae. Based upon the hypothesis that the effective flame speed is determined by the unresolved turbulent velocity fluctuations, we employ a new subgrid scale model which includes a localised treatment of the energy transfer through the turbulence cascade in combination with semi-statistical closures for the dissipation and non-local transport of turbulence energy. In addition, subgrid scale buoyancy effects are included. In the limit of negligible energy transfer and transport, the dynamical model reduces to the Sharp-Wheeler relation. According to our findings, the Sharp-Wheeler relation is insuffcient to account for the complicated turbulent dynamics of flames in thermonuclear supernovae. The application of a co-moving grid technique enables us to achieve very high spatial resolution in the burning region. Turbulence is produced mostly at the flame surface and in the interior ash regions. Consequently, there is a pronounced anisotropy in the vicinity of the flame fronts. The localised subgrid scale model predicts significantly enhanced energy generation and less unburnt carbon and oxygen at low velocities compared to earlier simulations., Comment: 13 pages, 10 figures, accepted for publication in Astron. Astrophys.; 3D visualisations not included; complete PDF version can be downloaded from http://www.astro.uni-wuerzburg.de/%7Eschmidt/Paper/SGSModel_II_AA.pdf

We present a one-equation subgrid scale model that evolves the turbulence energy corresponding to unresolved velocity fluctuations in large eddy simulations. The model is derived in the context of the Germano consistent decomposition of the hydrodynamical equations. The eddy-viscosity closure for the rate of energy transfer from resolved toward subgrid scales is localised by means of a dynamical procedure for the computation of the closure parameter. Therefore, the subgrid scale model applies to arbitrary flow geometry and evolution. For the treatment of microscopic viscous dissipation a semi-statistical approach is used, and the gradient-diffusion hypothesis is adopted for turbulent transport. A priori tests of the localised eddy-viscosity closure and the gradient-diffusion closure are made by analysing data from direct numerical simulations. As an a posteriori testing case, the large eddy simulation of thermonuclear combustion in forced isotropic turbulence is discussed. We intend the formulation of the subgrid scale model in this paper as a basis for more advanced applications in numerical simulations of complex astrophysical phenomena involving turbulence., Comment: 18 pages, 10 figures, accepted for publication in Astron. Astrophys.; 3D visualisations not included; complete PDF version can be downloaded from http://www.astro.uni-wuerzburg.de/%7Eschmidt/Paper/SGSModel_I_AA.pdf

Within the framework of the microscopic model of tunneling, we modelled the behavior of the Josephson junction shunted by the Superconductor-Insulator-Normal metal (SIN) tunnel junction. We found that the electromagnetic impedance of the SIN junction yields both the frequency-dependent damping and dynamic reactance which leads to an increase in the effective capacitance of the circuit. We calculated the dc I-V curves and transient characteristics of these circuits and explained their quantitative differences to the curves obtained within the resistively shunted junction model. The correct operation of the basic single-flux-quanta circuits with such SIN-shunted junctions, i.e. the Josephson transmission line and the toggle flip-flop, have also been modelled., Comment: 8 pages incl. 7 figures

In the framework of the Chandrasekhar-mass deflagration model for Type Ia supernovae (SNe Ia), a persisting free parameter is the initial morphology of the flame front, which is linked to the ignition process in the progenitor white dwarf. Previous analytical models indicate that the thermal runaway is driven by temperature perturbations (''bubbles'') that develop in the white dwarf's convective core. In order to probe the conditions at ignition (diameters, temperatures and evolutionary timescales), we have performed hydrodynamical 2D simulations of buoyant bubbles in white dwarf interiors. Our results show that fragmentation occurring during the bubble rise affects the outcome of the bubble evolution. Possible implications for the ignition process of SNe Ia are discussed., Comment: 12 pages, 11 figures, submitted to A&A

We present a systematic survey of the capabilities of type Ia supernova explosion models starting from a number of flame seeds distributed around the center of the white dwarf star. To this end we greatly improved the resolution of the numerical simulations in the initial stages. This novel numerical approach facilitates a detailed study of multi-spot ignition scenarios with up to hundreds of ignition sparks. Two-dimensional simulations are shown to be inappropriate to study the effects of initial flame configurations. Based on a set of three-dimensional models, we conclude that multi-spot ignition scenarios may improve type Ia supernova models towards better agreement with observations. The achievable effect reaches a maximum at a limited number of flame ignition kernels as shown by the numerical models and corroborated by a simple dimensional analysis., Comment: 14 pages, 12 figures with reduced resolution to meet astro-ph file size restriction, full-resolution version available from http://www.mpa-garching.mpg.de/~fritz/publications/astro-ph/multispot.pdf submitted to A&A

We apply an ad hoc model for dynamical ignition in three-dimensional numerical simulations of thermonuclear supernovae assuming pure deflagrations. The model makes use of the statistical description of temperature fluctuations in the pre-supernova core proposed by Wunsch & Woosley (2004). Randomness in time is implemented by means of a Poisson process. We are able to vary the explosion energy and nucleosynthesis depending on the free parameter of the model which controls the rapidity of the ignition process. However, beyond a certain threshold, the strength of the explosion saturates and the outcome appears to be robust with respect to number of ignitions. In the most energetic explosions, we find about 0.75 solar masses of iron group elements. Other than in simulations with simultaneous multi-spot ignition, the amount of unburned carbon and oxygen at radial velocities of a few 1000 km/s tends to be reduced for an ever increasing number of ignition events and, accordingly, more pronounced layering results., Comment: 7 pages, 6 figures, accepted for publication in Astron. Astrophys.; PDF version with full resolution figures available from http://www.astro.uni-wuerzburg.de/~schmidt/Paper/StochIgnt_AA.pdf

We study the dynamics of thermonuclear flames propagating in fuel stirred by stochastic forcing. The fuel consists of carbon and oxygen in a state which is encountered in white dwarfs close to the Chandrasekhar limit. The level set method is applied to represent the flame fronts numerically. The computational domain for the numerical simulations is cubic, and periodic boundary conditions are imposed. The goal is the development of a suitable flame speed model for the small-scale dynamics of turbulent deflagration in thermonuclear supernovae. Because the burning process in a supernova explosion is transient and spatially inhomogeneous, the localised determination of subgrid scale closure parameters is essential. We formulate a semi-localised model based on the dynamical equation for the subgrid scale turbulence energy $k_{\mathrm{sgs}}$. The turbulent flame speed $s_{\mathrm{t}}$ is of the order $\sqrt{2k_{\mathrm{sgs}}}$. In particular, the subgrid scale model features a dynamic procedure for the calculation of the turbulent energy transfer from resolved toward subgrid scales, which has been successfully applied to combustion problems in engineering. The options of either including or suppressing inverse energy transfer in the turbulence production term are compared. In combination with the piece-wise parabolic method for the hydrodynamics, our results favour the latter option. Moreover, different choices for the constant of proportionality in the asymptotic flame speed relation, $s_{\mathrm{t}}\propto\sqrt{2k_{\mathrm{sgs}}}$, are investigated., Comment: 36 pages, 11 figures (separately in PNG format), accepted for publication in Combust. Theory Modelling; PDF version with figures included can be downloaded from http://www.astro.uni-wuerzburg.de/~schmidt/Paper/TurbDefl_CTM.pdf

We show that a flame tracking/capturing scheme originally developed for deflagration fronts can be used to model thermonuclear detonations in multidimensional explosion simulations of type Ia supernovae. After testing the accuracy of the front model, we present a set of two-dimensional simulations of delayed detonations with a physically motivated off-center deflagration-detonation-transition point. Furthermore, we demonstrate the ability of the front model to reproduce the full range of possible interactions of the detonation with clumps of burned material. This feature is crucial for assessing the viability of the delayed detonation scenario., Comment: 7 pages, accepted by A&A

We demonstrate that shunting of Superconductor-Insulator-Superconductor Josephson junctions by Superconductor-Insulator-Normal metal (S-I-N) structures having pronounced non-linear I-V characteristics can remarkably modify the Josephson dynamics. In the regime of Josephson generation the phase behaves as an overdamped coordinate, while in the superconducting state the damping and current noise are strikingly small, that is vitally important for application of such junctions for readout and control of Josephson qubits. Superconducting Nb/AlO${_x}$/Nb junction shunted by Nb/AlO${_x}$/AuPd junction of S-I-N type was fabricated and, in agreement with our model, exhibited non-hysteretic I-V characteristics at temperatures down to at least 1.4 K., Comment: 4 pages incl. 3 figures

Josephson junction transistors and 50-junction arrays with linear junction dimensions from 200 nm down to 70 nm were fabricated from standard Nb/AlOx/Nb trilayers. The fabrication process includes electron beam lithography, dry etching, anodization, and planarization by chemical-mechanical polishing. The samples were characterized at temperatures down to 25 mK. In general, all junctions are of high quality and their I-U characteristics show low leakage currents and high superconducting energy gap values of 1.35 meV. The characteristics of the transistors and arrays exhibit some features in the subgap area, associated with tunneling of Cooper pairs, quasiparticles and their combinations due to the redistribution of the bias voltage between the junctions. Total island capacitances of the transistor samples ranged from 1.5 fF to 4 fF, depending on the junction sizes. Devices made of junctions with linear dimensions below 100 nm by 100 nm demonstrate a remarkable single-electron behavior in both superconducting and normal state. We also investigated the area dependence of the junction capacitances for transistor and array samples., Comment: 19 pages incl. 2 tables and 11 figures

The piece-wise parabolic method (PPM) is applied to simulations of forced isotropic turbulence with Mach numbers $\sim 0.1... 1$. The equation of state is dominated by the Fermi pressure of an electron-degenerate fluid. The dissipation in these simulations is of purely numerical origin. For the dimensionless mean rate of dissipation, we find values in agreement with known results from mostly incompressible turbulence simulations. The calculation of a Smagorinsky length corresponding to the rate of numerical dissipation supports the notion of the PPM supplying an implicit subgrid scale model. In the turbulence energy spectra of various flow realisations, we find the so-called bottleneck phenomenon, i.e., a flattening of the spectrum function near the wavenumber of maximal dissipation. The shape of the bottleneck peak in the compensated spectrum functions is comparable to what is found in turbulence simulations with hyperviscosity. Although the bottleneck effect reduces the range of nearly inertial length scales considerably, we are able to estimate the value of the Kolmogorov constant. For steady turbulence with a balance between energy injection and dissipation, it appears that $C\approx 1.7$. However, a smaller value is found in the case of transonic turbulence with a large fraction of compressive components in the driving force. Moreover, we discuss length scales related to the dissipation, in particular, an effective numerical length scale $\Delta_{\mathrm{eff}}$, which can be regarded as the characteristic smoothing length of the implicit filter associated with the PPM., Comment: 23 pages, 7 figures. Revised version accepted by Comp. Fluids. Not all figures included due to size restriction. Complete PDF available at http://www.astro.uni-wuerzburg.de/%7Eschmidt/Paper/NumDiss_CF.pdf

We present numerical calculations of the parameters $C_{\nu}$, $C_{\epsilon}$ and $C_{\kappa}$ associated with the common closures for turbulence production, dissipation and diffusion. In the case of homogeneous and isotropic turbulence, these parameters are expected to be statistically scale-invariant within the inertial subrange. In order to scrutinise this conjecture, we utilised a generalisation of the Germano filtering formalism, which is applicable to compressible flows as well. The filtering of data obtained from three-dimensional direct numerical simulations of forced isotropic turbulence with Mach numbers in the range $\sim 0.1...1$ then yielded values of the closure parameters associated with different length scales. The results indicate that the closure parameters are nearly universal for subsonic or moderately transonic flows, although the resolution of $432^{3}$ grid cells in our simulations is not quite sufficient to clearly establish scale invariance. In addition, it was found that the customary assumption of a kinetic Prandtl number of about unity for the gradient-diffusion closure is flawed due to the misalignment between turbulent flux and the gradient of the turbulence energy. Nevertheless, sound correlation can be achieved if the flux magnitude rather than the flux vector is locally matched. This conclusion is particularly useful for the family of subgrid scale models based on the turbulence energy equation. Furthermore, the parameter of production $C_{\nu}$ was computed in the fashion of dynamical procedures. Thereby, superior agreement between modelled and explicitly evaluated turbulence stresses in comparison to the eddy-viscosity closure with constant $C_{\nu}$ was verified., Comment: 17 pages, 4 figures; submitted to J. Fluid Mech. PDF file with full resolution figures available at http://www.astro.uni-wuerzburg.de/~schmidt/SimlTurb_JFM.pdf

Type Ia supernovae have recently received considerable attention because it appears that they can be used as "standard candles" to measure cosmic distances out to billions of light years away from us. Observations of type Ia supernovae seem to indicate that we are living in a universe that started to accelerate its expansion when it was about half its present age. These conclusions rest primarily on phenomenological models which, however, lack proper theoretical understanding, mainly because the explosion process, initiated by thermonuclear fusion of carbon and oxygen into heavier elements, is difficult to simulate even on supercomputers. Here, we investigate a new way of modeling turbulent thermonuclear deflagration fronts in white dwarfs undergoing a type Ia supernova explosion. Our approach is based on a level set method which treats the front as a mathematical discontinuity and allows for full coupling between the front geometry and the flow field. New results of the method applied to the problem of type Ia supernovae are obtained. It is shown that in 2-D with high spatial resolution and a physically motivated subgrid scale model for the nuclear flames numerically "converged" results can be obtained, but for most initial conditions the stars do not explode. In contrast, simulations in 3-D, do give the desired explosions and many of their properties, such as the explosion energies, lightcurves and nucleosynthesis products, are in very good agreement with observed type Ia supernovae., Comment: 17 pages, 13 figures, some figures are reduced in resolution, full-resolution version of this text available at http://www.mpa-garching.mpg.de/mpa/publications/preprints/pp2004/MPA1621.pdf -- to appear in "Analysis and Numerics of Conservation Laws", ed. G. Warnecke (Springer-Verlag)

We investigate the interaction of thermonuclear flames in Type Ia supernova explosions with vortical flows by means of numerical simulations. In our study, we focus on small scales, where the flame propagation is no longer dominated by the turbulent cascade originating from large-scale effects. Here, the flame propagation proceeds in the cellular burning regime, resulting from a balance between the Landau-Darrieus instability and its nonlinear stabilization. The interaction of a cellularly stabilized flame front with a vortical fuel flow is explored applying a variety of fuel densities and strengths of the velocity fluctuations. We find that the vortical flow can break up the cellular flame structure if it is sufficiently strong. In this case the flame structure adapts to the imprinted flow field. The transition from the cellularly stabilized front to the flame structure dominated by vortices of the flow proceeds in a smooth way. The implications of the results of our simulations for Type Ia Supernova explosion models are discussed., Comment: 13 pages, 2 tables, 10 figures, resolution of Figs. 4 and 5 degraded due to archive file size restrictions, submitted to A&A

We investigate low-temperature and low-voltage-bias charge transport in a superconducting Al single electron transistor in a dissipating environment, realized as on-chip high-ohmic Cr microstrips. In our samples with relatively large charging energy values Ec > EJ, where EJ is the energy of the Josephson coupling, two transport mechanisms were found to be dominating, both based on discrete tunneling of individual Cooper pairs: Depending on the gate voltage Vg, either sequential tunneling of pairs via the transistor island (in the open state of the transistor around the points Qg = CgVg = e mod(2e), where Cg is the gate capacitance) or their cotunneling through the transistor (for Qg away of these points) was found to prevail in the net current. As the open states of our transistors had been found to be unstable with respect to quasiparticle poisoning, high-frequency gate cycling (at f ~ 1 MHz) was applied to study the sequential tunneling mechanism. A simple model based on the master equation was found to be in a good agreement with the experimental data., Comment: 8 pages, 6 figures

We present a numerical investigation of the cellular burning regime in Type Ia supernova explosions. This regime holds at small scales (i.e. below the Gibson scale), which are unresolved in large-scale Type Ia supernova simulations. The fundamental effects that dominate the flame evolution here are the Landau-Darrieus instability and its nonlinear stabilization, leading to a stabilization of the flame in a cellular shape. The flame propagation into quiescent fuel is investigated addressing the dependence of the simulation results on the specific parameters of the numerical setup. Furthermore, we investigate the flame stability at a range of fuel densities. This is directly connected to the questions of active turbulent combustion (a mechanism of flame destabilization and subsequent self-turbulization) and a deflagration-to-detonation transition of the flame. In our simulations we find no substantial destabilization of the flame when propagating into quiescent fuels of densities down to ~10^7 g/cm^3, corroborating fundamental assumptions of large-scale SN Ia explosion models. For these models, however, we suggest an increased lower cutoff for the flame propagation velocity to take the cellular burning regime into account., Comment: 12 pages, 2 tables, 10 figures, resolution of figures degraded due to archive file size restrictions, submitted to A&A

We observed current-voltage characteristics of superconducting single charge transistors with on-chip resistors of R about R_Q = h/4e^2 = 6.45 kOhm, which are explained in terms of Cooper-pair cotunneling. Both the effective strength of Josephson coupling and the cotunneling current are modulated by the gate-induced charge on the transistor island. For increasing values of the resistance R we found the Cooper pair current at small transport voltages to be dramatically suppressed., Comment: 4 pages and 2 figures

We present a numerical model which allows us to investigate thermonuclear flames in Type Ia supernova explosions. The model is based on a finite-volume explicit hydrodynamics solver employing PPM. Using the level-set technique combined with in-cell reconstruction and flux-splitting schemes we are able to describe the flame in the discontinuity approximation. We apply our implementation to flame propagation in Chandrasekhar-mass Type Ia supernova models. In particular we concentrate on intermediate scales between the flame width and the Gibson-scale, where the burning front is subject to the Landau-Darrieus instability. We are able to reproduce the theoretical prediction on the growth rates of perturbations in the linear regime and observe the stabilization of the flame in a cellular shape. The increase of the mean burning velocity due to the enlarged flame surface is measured. Results of our simulation are in agreement with semianalytical studies., Comment: 9 pages, 7 figures, Uses AASTEX, emulateapj5.sty, onecolfloat.sty. Replaced with accepted version (ApJ), Figures 1 and 3 are new

We present the results of three-dimensional hydrodynamical simulations of the subsonic thermonuclear burning phase in type Ia supernovae. The burning front model contains no adjustable parameters so that variations of the explosion outcome can be linked directly to changes in the initial conditions. In particular, we investigate the influence of the initial flame geometry on the explosion energy and find that it appears to be weaker than in 2D. Most importantly, our models predict global properties such as the produced nickel masses and ejecta velocities within their observed ranges without any fine tuning., Comment: 7 pages, 5 figures, accepted by A&A

As a simple model for unknown Planck scale physics, we assume that the quantum modes responsible for producing primordial curvature perturbations during inflation are placed in their instantaneous adiabatic vacuum when their proper momentum reaches a fixed high energy scale M. The resulting power spectrum is derived and presented in a form that exhibits the amplitude and frequency of the superimposed oscillations in terms of H/M and the slow roll parameter epsilon. The amplitude of the oscillations is proportional to the third power of H/M. We argue that these small oscillations give the lower bound of the modifications of the power spectrum if the notion of free mode propagation ceases to exist above the critical energy scale M., Comment: 10 pages; matches version accepted by PRD

We present a numerical model to study the behavior of thermonuclear flames in the discontinuity approximation. This model is applied to investigate the Landau-Darrieus instability under conditions found in Type Ia supernova explosions of Chandrasekhar mass white dwarfs. This is a first step to explore the flame microstructure in these events. The model reproduces Landau's linearized stability analysis in early stages of the flame evolution and the stabilization in a cellular flame structure in the nonlinear stage., Comment: 6 pages, 3 figures, to appear in Proc. 11th Workshop on Nuclear Astrophysics, Ringberg Castle, Germany, 2002

Type Ia supernovae have become an indispensable tool for studying the expansion history of the universe, yet our understanding of the explosion mechanism is still incomplete. We describe the variety of discussed scenarios, sketch the most relevant physics, and report recent advances in multidimensional simulations of Chandrasekhar mass white dwarf explosions., Comment: Based on an invited review at the XIII Rencontres de Blois - Frontiers of the Universe, June 17-23,2001

Deep submicron Al-AlOx-Nb tunnel junctions and single electron transistors with niobium islands were fabricated by electron beam gun shadow evaporation. Using stencil masks consisting of the thermostable polymer polyethersulfone (PES) and germanium, high quality niobium patterns with good superconducting properties and a gap energy of up to 2Delta = 2.5 meV for the niobium were achieved. The I(U) characteristics of the transistors show special features due to tunneling of single Cooper pairs and significant gate modulation in both the superconducting and the normal state., Comment: 4 pages, 4 figures

Following up on earlier work on this topic (Reinecke et al. 1999, A&A 347, pp. 724 and 739), we present an improved set of numerical models for simulations of white dwarfs exploding as Type Ia supernovae (SNe Ia). Two-dimensional simulations were used to test the reliability and numerical robustness of these algorithms; the results indicate that integral quantities like the total energy release are insensitive to changes of the grid resolution (above a certain threshold), which was not the case for our former code. The models were further enhanced to allow fully three-dimensional simulations of SNe Ia. A direct comparison of a 2D and a 3D calculation with identical initial conditions shows that the explosion is considerably more energetic in three dimensions; this is most likely caused by the assumption of axisymmetry in 2D, which inhibits the growth of flame instabilities in the azimuthal direction and thereby decreases the flame surface., Comment: 8 pages, 6 figures, submitted to A&A