Search

In this work, vanadium is extracted from TiCl4 refining tailings by a clean metallurgical process and FeVO4 is prepared by adjusting the pH of acid leaching solution. The main factors affecting the leaching of vanadium from tailings are leaching temperature, solid-to-liquid ratio, hydrochloric acid concentration and type of oxidant. Under the optimal leaching conditions, when the leaching temperature is 30°C, the solid-liquid ratio is 1 : 4, the hydrochloric acid concentration is 400 g/L, and the oxidant is H2O2, the leaching rate of V can reach 97.1% after 60 min of reaction. The main factors affecting the precipitation of FeVO4 are the precipitation temperature, the initial vanadium concentration, the pH endpoint value of acid leaching solution and the addition amount of H2O2 oxidant. Under the optimal precipitation conditions, when the precipitation temperature is 40°C, the initial vanadium concentration is 5 g/L, the pH endpoint value of the acid leaching solution is 1.4, the addition amount of H2O2 oxidant is 6%, the precipitation rate of V can reach 95.4% after 60 min. By adjusting the pH value of precipitation filtrate, metal ions such as Fe, Al, Ca and Mg precipitate to form neutralization slag. The neutralization filtrate can be prepared NaCl crystals by evaporation crystallization, and the mother liquor of evaporation crystallization is returned to acid leaching for use. Acid leaching residue (TiO2 content is 55.42%) can be recycled as high-titanium raw material. This study can properly deal with the environmental pollution caused by the stacking of TiCl4 refining tailings.

As one of the most sensitive regions to global climate change, alpine tundra in many places around the world has been undergoing dramatic changes in vegetation communities over the past few decades. Herbaceous plant species in the Changbai Mountains area have significantly expanded into tundra shrub communities over the past 30 yr. Soil microbial communities, enzyme activities, and soil nutrients are intertwined with this expansion process. In order to understand the responses of the soil microbial communities to such an expansion, we analyzed soil microbial community structures and enzyme activities in shrub tundra as well as areas with three different levels of herbaceous plant expansion. Our investigation was based on phospholipid fatty acid (PLFA) analysis and 96-well microtiter plates. The results showed that herbs have expanded greatly in the tundra, and they have become the dominant species in herbaceous plant expansion areas. There were differences for community composition and appearance among the shrub tundra and the mild expansion, moderate expansion, and severe expansion areas. Except for soil organic matter, soil nutrients were increased in herbaceous plant expansion areas, and the total nitrogen (TN), total phosphorus (TP), available nitrogen (AN), and available phosphorus (AP) were greatest in moderate expansion areas (MOE), while soil organic matter levels were highest in the non-expanded areas (CK). The total soil PLFAs in the three levels of herbaceous plant expansion areas were significantly higher than those in the non-expanded areas, and total soil PLFAs were highest in the moderately expanded area and lowest in the severely expanded area (SEE). Bacteria increased significantly more than fungi and actinomycetes with herbaceous plant expansion. Soil hydrolase activities (β-1,4-glucosidase (βG) activity, β-1, 4-N-acetylglucosaminidase (NAG) activity, and acid phosphatase (aP) activity) were highest in MOE and lowest in the CK treatment. Soil oxidase activities (polyphenol oxidase (PPO) activities and peroxidase (PER) activities) were also highest in MOE, but they were lowest in the SEE treatment. The variations in total soil PLFAs with herbaceous plant expansion were mostly correlated with soil organic matter and available phosphorus concentrations, while soil enzyme activities were mostly correlated with the total soil nitrogen concentration. Our results suggest that herbaceous plant expansion increase the total soil PLFAs and soil enzyme activities and improved soil nutrients. However, soil microorganisms, enzyme activity, and nutrients responded differently to levels of herbaceous plant expansion. The soil conditions in mild and moderate expansion areas are more favorable than those in severe expansion areas.

Graphite particles and boron carbide (B4C) particles were added into copper matrix composites by powder metallurgy to form a new composite-reinforced and lubricated system. The effects of different amounts of B4C particles on the properties of composites were studied. With addition of 2 wt % graphite powder as the solid lubricating phase, the effects of B4C particle content on the microstructure, density, porosity, Vickers hardness, compressive strength, and the friction and wear properties of the copper-matrix/graphite self-lubricating composite materials were investigated. The results indicate that increasing addition of B4C particles significantly improved the density, Vickers hardness, compression strength; friction and wear properties of composites. However, excess B4C particles also increased porosity. The connected netted B4C particles disrupt the continuity of the metal matrix causing serious decreases in density, Vickers hardness, compression, and the friction and wear properties of the composite material. Of the tested composites, the materials containing 1.5 wt % B4C showed the best friction and wear resistance properties.

A green process that uses the spray pyrolysis method to prepare activated alumina is proposed in this research. The effects of spray temperature, carrier gas pressure, and AlCl3 solution concentration are experimentally investigated using pure reagents. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and specific surface area (BET) analyses. The results indicate that the spray temperature is the most important factor on the conversion ratio of alumina during the spray pyrolysis process. The conversion ratio of alumina achieved over 99% at the following optimal conditions: temperature of 1000°C, pressure of 0.3 MPa, and AlCl3 solution concentration of 10 wt%. The activated alumina with 8–20 nm particle size (γ-Al2O3+α-Al2O3) was prepared using the same process, which well met the requirement of the catalyst carrier. The green utilization of high-alumina fly ash and acid recycling can be achieved by using this process.

Vegetation in high altitude areas normally exhibits the strongest response to global warming. We investigated the tundra vegetation on the Changbai Mountains and revealed the similarities and differences between the north and the southwest slopes of the Changbai Mountains in response to global warming. Our results were as follows: 1) The average temperatures in the growing season have increased from 1981 to 2015, the climate tendency rate was 0.38°C/10yr, and there was no obvious change in precipitation observed. 2) The tundra vegetation of the Changbai Mountains has changed significantly over the last 30 years. Specifically, herbaceous plants have invaded into the tundra zone, and the proportion of herbaceous plants was larger than that of shrubs. Shrub tundra was transforming into shrub-grass tundra. 3) The tundra vegetation in the north and southwest slopes of the Changbai Mountains responded differently to global warming. The southwest slope showed a significantly higher degree of invasion from herbaceous plants and exhibited greater vegetation change than the north slope. 4) The species diversity of plant communities on the tundra zone of the north slope changed unimodally with altitude, while that on the tundra zone of the southwest slope decreased monotonously with altitude. Differences in the degree of invasion from herbaceous plants resulted in differences in species diversity patterns between the north and southwest slopes. Differences in local microclimate, plant community successional stage and soil fertility resulted in differential responses of tundra vegetation to global warming.