Search

Photonic devices based on ferroelectric domain engineering in thin film lithium niobate are key components for both classical and quantum information processing. Periodic poling of ridge waveguide can avoid the selective etching effect of lithium niobate, however, the fabrication of high-quality ferroelectric domain is still a challenge. In this work, we optimized the applied electric field distribution, and rectangular inverted domain structure was obtained in the ridge waveguide which is beneficial for efficient nonlinear frequency conversions. Second harmonic confocal microscope, piezoresponse force microscopy, and chemical selective etching were used to characterize the inverted domain in the ridge waveguide. In addition, the performance of nonlinear frequency conversion of the periodically poled nano-waveguide was investigated through second harmonic generation, and the normalized conversion efficiency was measured to be 1,720 % W−1 cm−2, which is close to 60 % that of the theoretical value. The fabrication technique described in this work will pave the way for the development of high-efficiency, low-loss lithium niobate nonlinear photonic devices.

The ability to manipulate light propagation sets the foundations for optical communication and information processing systems. With the ever-growing data capacity and data rate, photonic integrated circuits have attracted increasing attentions of researchers owing to their large-volume integration capacity and fast operation speed. In this work, we proposed and experimentally demonstrated a new wavefront shaping method using waveguide arrays with hyperbolic secant refractive index profiles. Through theoretically analyzing the diffraction and coherence properties, we found that a single waveguide array can perform both imaging and phase transformation, which are the two primary functions of optical lenses. We further expanded this function and fabricated the corresponding devices on a silicon nitride waveguide platform. Deterministic beam shaping, such as focusing, expansion, collimation, and steering, is successfully realized. This wavefront control method exhibits the potential for on-chip optical routing, ranging, sensing, etc., with high integration density and scalability.

Absorbable polymers have attracted increasing attention in the field of bone regeneration in recent years for their degradation. Compared with other degradable polymers, polypropylene carbonate (PPC) has several advantages such as biodegradation and relatively cheap raw materials. Most importantly, PPC can degrade into water and carbon dioxide totally which does not give rise to local inflammation and bone resorption in vivo. However, pure PPC has not presented excellent osteoinductivity properties. In order to enhance the osteoinductivity of PPC, silicon nitride (SiN) was employed due to its excellent mechanical properties, biocompatibility and osteogenesis compared with the other common materials such as hydroxyapatite and calcium phosphate ceramics. In this study, composites of PPC mixed with different contents of SiN were prepared successfully (PSN10 with 10 wt% SiN content, and PSN20 with 20 wt% SiN content). The characterization of the composites suggested that PPC mixed with SiN evenly and PSN composites presented stable properties. The results in vitro revealed that the PSN20 composite possessed satisfactory biocompatibility and exerted better osteogenic differentiation effects on adipose-derived stem cells (ADSCs). In particular, the PSN20 composite accelerated the healing of bone defects better and degraded with the process of bone healing in vivo. Overall, the PSN20 composite exhibited better biocompatibility, induced osteogenic differentiation of ADSCs and promoted healing of bone defects, due to which the PSN composite is considered as a potential candidate for treating bone defects in the field of bone tissue engineering. [ABSTRACT FROM AUTHOR]