Search

This paper presents a novel foldable S-band microstrip patch antenna array operating in the 2.4–2.45 GHz band. The substrate is designed to allow the array to be folded and arranged in tiles, forming a versatile, reconfigurable antenna array. Additive manufacturing is used to fabricate the substrate for ease of fabrication and flexibility in its design. The major challenge in this type of design is creating a proper method of feeding the elements while maintaining the array's optimal performance. A novel hinge design that can hold a coaxial cable for the series-fed array is introduced. The hinge provides the capability of folding the array from a flat orientation into various folded orientations. In this paper, a 2 × 1 microstrip array unit is presented as proof of concept. The antenna was fabricated and measured, and the results of the measurements are in close agreement with the simulations. The antenna can provide a gain as high as 7.72 dBi in flat conditions. [ABSTRACT FROM AUTHOR]

In WiFi 7 (IEEE 802.11be), Multiple Input Multiple Output (MIMO) technology plays a crucial role in enhancing throughput. This combination enables numerous applications for wearable WiFi devices. For instance, WiFi can be utilized for tracking and fall detection purposes. Additionally, wearable devices used in gaming, vital signal monitoring, and tracking can benefit from the implementation of wearable MIMO antennas. Despite the demand for wearable WiFi antennas, specifically in the new 6 GHz band, a significant gap exists in the investigation of antennas that are completely made of textile, are low profile, and provide vertical polarization and omnidirectional patterns. Addressing this gap, in this paper, a wearable planar antenna is introduced, which is specifically designed to offer an omnidirectional pattern and linear polarization. To ensure its practicality and ease of use, the antenna utilizes lightweight and wearable textile material. The design details and performance of the proposed antenna are presented. The antenna covers all three bands of WiFi, namely, 2.4 GHz, 5 GHz, and 6 GHz bands. The 10-dB return loss bandwidth is 2.4 GHz-2.5 GHz, and 4.6 GHz-7.2 GHz. The maximum Specific Absorption Rate (SAR) for an input power of 500 mW is calculated at 1.053 W/Kg for a 2 mm air gap between the antenna and tissue surface. The size of the antenna is given by a circular area of π x (50 mm)², and a thickness of 6 mm. [ABSTRACT FROM AUTHOR]

March marks Women's History Month, and March 8th is celebrated as International Women's Day. In this Special Article, Sima Noghanian interviews Mahta Mogaddam, renowned scholar in applied and computational electromagnetics. [ABSTRACT FROM AUTHOR]

A high-resolution channel sounding technique has been used to investigate the cross-polarization of electromagnetic waves in the 5-6 GHz band. Experiments were performed in two non-line-of-sight indoor locations, and it was found that there is a strong dependency of the cross-polarization of multipath components on the elevation angle-of-arrival. For a vertically polarized transmitting antenna, clusters of co-polarized multipath components were confined predominantly to the region around the horizontal plane that contains the virtual line-of-sight between transmitter and receiver. In contrast, cross-polarized signals were detected for a variety of elevation angles with considerable power levels. The surroundings of the receiver were identified as the principal source of depolarized signals. In addition, time dispersion analysis of the multipath signals led to the determination of the AoAs where there is a strong correspondence between co- and cross-polarized signals as a consequence of the partial depolarization of MPCs. This work supports the exploitation of the joint space and polarization diversities in indoor propagation scenarios to improve the system performance. Index Terms--Electric field measurement, indoor propagation, multipath channels, polarization.

The performance of multiple-input multiple-output (MIMO) systems using beam selection is investigated in this paper. Based on the results of a channel sounding campaign carried out at the University of Manitoba for line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios, it was possible to contrast the results of transmitter, receiver and joint beam selection in rich scattering environments. The channel was characterized in the 1-2.4 GHz frequency band with a multipath delay resolution better than 5.8 ns. The beam selection was performed by exhaustive search method. The results led us to important conclusions regarding the beam selection procedure and its potential to improve the indoor channel capacity. In LOS, the single input single output (SISO) system that favours the maximum power direction of arrival (DOA) maximizes the capacity. Capacity improvements are observed by increasing the number of receiver beams (RBs) only at high signal-to-noise ratios (SNRs) for omnidirectional transmission. The best performance in transmitter beam selection in LOS is observed by increasing the number of transmitter beams (TBs) for high SNRs. In the case of NLOS, the capacity performance is improved when more than a single beam is used in either, transmitter or receiver side. The joint transmitter-receiver beam selection exhibits best capacity performance only for large SNRs in LOS while the SISO systems outperforms any joint beam selection alternative for low SNRs. In contrast, in NLOS environments, the use of joint beam selection shows a constant capacity performance improvement starting from lower SNR than in the LOS case. Index Terms--Information rate, multiple-input multiple-output (MIMO) systems, multibeam antennas, multipath channels, time-domain measurements.