Search

To maximize effects of dorsal leaf ankle foot orthoses (AFOs) on gait in people with bilateral plantarflexor weakness, the AFO properties should be matched to the individual. However, how AFO properties interact regarding their effect on gait function is unknown. We studied the interaction of AFO bending stiffness with neutral angle and footplate stiffness on the effect of bending stiffness on walking energy cost, gait kinematics and kinetics in people with plantarflexor weakness by employing predictive simulations. Our simulation framework consisted of a planar 11 degrees of freedom model, containing 11 muscles activated by a reflex-based neuromuscular controller. The controller was optimized by a comprehensive cost function, predominantly minimizing walking energy cost. The AFO bending and footplate stiffness were modelled as torsional springs around the ankle and metatarsal joint. The neutral angle of the AFO was defined as the angle in the sagittal plane at which the moment of the ankle torsional spring was zero. Simulations without AFO and with AFO for 9 bending stiffnesses (0–14 Nm/degree), 3 neutral angles (0–3-6 degrees dorsiflexion) and 3 footplate stiffnesses (0–0.5–2.0 Nm/degree) were performed. When changing neutral angle towards dorsiflexion, a higher AFO bending stiffness minimized energy cost of walking and normalized joint kinematics and kinetics. Footplate stiffness mainly affected MTP joint kinematics and kinetics, while no systematic and only marginal effects on energy cost were found. In conclusion, the interaction of the AFO bending stiffness and neutral angle in bilateral plantarflexor weakness, suggests that these should both be considered together when matching AFO properties to the individual patient.

Background: The stiffness of a dorsal leaf AFO that minimizes walking energy cost in people with plantarflexor weakness varies between individuals. Using predictive simulations, we studied the effects of plantarflexor weakness, passive plantarflexor stiffness, body mass, and walking speed on the optimal AFO stiffness for energy cost reduction. Methods: We employed a planar, nine degrees-of-freedom musculoskeletal model, in which for validation maximal strength of the plantar flexors was reduced by 80%. Walking simulations, driven by minimizing a comprehensive cost function of which energy cost was the main contributor, were generated using a reflex-based controller. Simulations of walking without and with an AFO with stiffnesses between 0.9 and 8.7 Nm/degree were generated. After validation against experimental data of 11 people with plantarflexor weakness using the Root-mean-square error (RMSE), we systematically changed plantarflexor weakness (range 40–90% weakness), passive plantarflexor stiffness (range: 20–200% of normal), body mass (+ 30%) and walking speed (range: 0.8–1.2 m/s) in our baseline model to evaluate their effect on the optimal AFO stiffness for energy cost minimization. Results: Our simulations had a RMSE < 2 for all lower limb joint kinetics and kinematics except the knee and hip power for walking without AFO. When systematically varying model parameters, more severe plantarflexor weakness, lower passive plantarflexor stiffness, higher body mass and walking speed increased the optimal AFO stiffness for energy cost minimization, with the largest effects for severity of plantarflexor weakness. Conclusions: Our forward simulations demonstrate that in individuals with bilateral plantarflexor the necessary AFO stiffness for walking energy cost minimization is largely affected by severity of plantarflexor weakness, while variation in walking speed, passive muscle stiffnes

Background: The stiffness of a dorsal leaf AFO that minimizes walking energy cost in people with plantarflexor weakness varies between individuals. Using predictive simulations, we studied the effects of plantarflexor weakness, passive plantarflexor stiffness, body mass, and walking speed on the optimal AFO stiffness for energy cost reduction. Methods: We employed a planar, nine degrees-of-freedom musculoskeletal model, in which for validation maximal strength of the plantar flexors was reduced by 80%. Walking simulations, driven by minimizing a comprehensive cost function of which energy cost was the main contributor, were generated using a reflex-based controller. Simulations of walking without and with an AFO with stiffnesses between 0.9 and 8.7 Nm/degree were generated. After validation against experimental data of 11 people with plantarflexor weakness using the Root-mean-square error (RMSE), we systematically changed plantarflexor weakness (range 40–90% weakness), passive plantarflexor stiffness (range: 20–200% of normal), body mass (+ 30%) and walking speed (range: 0.8–1.2 m/s) in our baseline model to evaluate their effect on the optimal AFO stiffness for energy cost minimization. Results: Our simulations had a RMSE < 2 for all lower limb joint kinetics and kinematics except the knee and hip power for walking without AFO. When systematically varying model parameters, more severe plantarflexor weakness, lower passive plantarflexor stiffness, higher body mass and walking speed increased the optimal AFO stiffness for energy cost minimization, with the largest effects for severity of plantarflexor weakness. Conclusions: Our forward simulations demonstrate that in individuals with bilateral plantarflexor the necessary AFO stiffness for walking energy cost minimization is largely affected by severity of plantarflexor weakness, while variation in walking speed, passive muscle stiffness and body mass influence the optimal stiffness to a lesser extent. That gait, Biomechatronics & Human-Machine Control

To maximize effects of dorsal leaf ankle foot orthoses (AFOs) on gait in people with bilateral plantarflexor weakness, the AFO properties should be matched to the individual. However, how AFO properties interact regarding their effect on gait function is unknown. We studied the interaction of AFO bending stiffness with neutral angle and footplate stiffness on the effect of bending stiffness on walking energy cost, gait kinematics and kinetics in people with plantarflexor weakness by employing predictive simulations. Our simulation framework consisted of a planar 11 degrees of freedom model, containing 11 muscles activated by a reflex-based neuromuscular controller. The controller was optimized by a comprehensive cost function, predominantly minimizing walking energy cost. The AFO bending and footplate stiffness were modelled as torsional springs around the ankle and metatarsal joint. The neutral angle of the AFO was defined as the angle in the sagittal plane at which the moment of the ankle torsional spring was zero. Simulations without AFO and with AFO for 9 bending stiffnesses (0–14 Nm/degree), 3 neutral angles (0–3-6 degrees dorsiflexion) and 3 footplate stiffnesses (0–0.5–2.0 Nm/degree) were performed. When changing neutral angle towards dorsiflexion, a higher AFO bending stiffness minimized energy cost of walking and normalized joint kinematics and kinetics. Footplate stiffness mainly affected MTP joint kinematics and kinetics, while no systematic and only marginal effects on energy cost were found. In conclusion, the interaction of the AFO bending stiffness and neutral angle in bilateral plantarflexor weakness, suggests that these should both be considered together when matching AFO properties to the individual patient., Biomechatronics & Human-Machine Control

Background: In individuals with unilateral plantar flexor weakness, the second peak of the vertical ground reaction force (GRF) is decreased. This leads to a higher ground reaction force, e.g. impact, of the contralateral leg, potentially explaining quadriceps muscle and/or knee joint pain. Energy cost optimized dorsal leaf ankle-foot-orthoses (AFOs) may increase the push-off ground reaction force, which in turn could lead to lower impact forces on the contralateral leg. Research questions: 1) Are impact forces increased in the contralateral leg of people with unilateral plantar flexor weakness compared to healthy subjects? 2) Do energy cost optimized AFOs reduce impact forces and improve leg impact symmetry compared to walking without AFO in people with unilateral plantar flexor weakness? Methods: Nine subjects with unilateral plantar flexor weakness were provided a dorsal leaf AFO with a stiffness primarily optimized for energy cost. Using 3D gait analyses peak vertical GRF during loading response with and without AFO, and the symmetry between the legs in peak GRF were calculated. Peak GRF and symmetry were compared with reference data of 23 healthy subjects. Results: The contralateral leg showed a significant higher peak vertical GRF (12.0 ± 0.9 vs 11.2 ± 0.6 N/kg, p = 0.005) compared to healthy reference data. When walking with AFO, the peak vertical GRF of the contralateral leg significantly reduced (from 12.0 ± 0.9 to 11.4 ± 0.7 N/kg, p = 0.017) and symmetry improved compared to no AFO (from 0.93 ± 0.06 to 1.01 ± 0.05, p < 0.001). Conclusion: In subjects with unilateral plantar flexor weakness, impact force on the contralateral leg was increased when compared to healthy subjects and dorsal leaf AFOs optimized for energy cost substantially reduced this force and improved impact symmetry when compared to walking without AFO. This indicates that dorsal leaf AFOs may reduce pain resulting from increased impact forces during gait in the contralateral leg in p, Biomechatronics & Human-Machine Control

Abstract Background: Progression of plantar flexor weakness in neuromuscular diseases is usually monitored by muscle strength measurements, although they poorly relate to muscle function during walking. Pathophysiological changes such as intramuscular adipose tissue affect dynamic muscle function independent from isometric strength. Diffusion tensor imaging and T2 imaging are quantitative MRI measures reflecting muscular pathophysiological changes, and are therefore potential biomarkers to monitor plantar flexor functioning during walking in people with neuromuscular diseases. Methods: In fourteen individuals with plantar flexor weakness diffusion tensor imaging and T2 scans of the plantar flexors were obtained, and the diffusion indices fractional anisotropy and mean diffusivity calculated. With a dynamometer, maximal isometric plantar flexor strength was measured. 3D gait analysis was used to assess maximal ankle moment and power during walking. Findings: Fractional anisotropy, mean diffusivity and T2 relaxation time all moderately correlated with maximal plantar flexor strength (r > 0.512). Fractional anisotropy and mean diffusivity were not related with ankle moment or power (r < 0.288). T2 relaxation time was strongly related to ankle moment (r = -0.789) and ankle power (r = -0.798), and moderately related to maximal plantar flexor strength (r < 0.600). Interpretation: In conclusion, T2 relaxation time, indicative of multiple pathophysiological changes, was strongly related to plantar flexor function during walking, while fractional anisotropy and mean diffusivity, indicative of fiber size, only related to maximal plantar flexor strength. This indicates that these measures may be suitable to monitor muscle function and gain insights into the pathophysiological changes underlying a poor plantar flexor functioning during gait in people with neuromuscular diseases. Keywords: Calf muscle weakness; Diffusion

Background: In individuals with unilateral plantar flexor weakness, the second peak of the vertical ground reaction force (GRF) is decreased. This leads to a higher ground reaction force, e.g. impact, of the contralateral leg, potentially explaining quadriceps muscle and/or knee joint pain. Energy cost optimized dorsal leaf ankle-foot-orthoses (AFOs) may increase the push-off ground reaction force, which in turn could lead to lower impact forces on the contralateral leg. Research questions: 1) Are impact forces increased in the contralateral leg of people with unilateral plantar flexor weakness compared to healthy subjects? 2) Do energy cost optimized AFOs reduce impact forces and improve leg impact symmetry compared to walking without AFO in people with unilateral plantar flexor weakness? Methods: Nine subjects with unilateral plantar flexor weakness were provided a dorsal leaf AFO with a stiffness primarily optimized for energy cost. Using 3D gait analyses peak vertical GRF during loading response with and without AFO, and the symmetry between the legs in peak GRF were calculated. Peak GRF and symmetry were compared with reference data of 23 healthy subjects. Results: The contralateral leg showed a significant higher peak vertical GRF (12.0 ± 0.9 vs 11.2 ± 0.6 N/kg, p = 0.005) compared to healthy reference data. When walking with AFO, the peak vertical GRF of the contralateral leg significantly reduced (from 12.0 ± 0.9 to 11.4 ± 0.7 N/kg, p = 0.017) and symmetry improved compared to no AFO (from 0.93 ± 0.06 to 1.01 ± 0.05, p < 0.001). Conclusion: In subjects with unilateral plantar flexor weakness, impact force on the contralateral leg was increased when compared to healthy subjects and dorsal leaf AFOs optimized for energy cost substantially reduced this force and improved impact symmetry when compared to walking without AFO. This indicates that dorsal leaf AFOs may reduce pain resulting from increased impact forces during gait in the contralateral leg in p

Item does not contain fulltext

Background: Bilateral plantarflexor muscle weakness is a common impairment in many neuromuscular diseases. However, the way in which severity of plantarflexor weakness affects gait in terms of walking energy cost and speed is not fully understood. Predictive simulations are an attractive alternative to human experiments as simulations allow systematic alterations in muscle weakness. However, simulations of pathological gait have not yet been validated against experimental data, limiting their applicability. Research question: Our first aim was to validate a predictive simulation framework for walking with bilateral plantarflexor weakness by comparing predicted gait against experimental gait data of patients with bilateral plantarflexor weakness. Secondly, we aimed to evaluate how incremental levels of bilateral plantarflexor weakness affect gait. Methods: We used a planar musculoskeletal model with 9 degrees of freedom and 9 Hill-type muscle-tendon units per leg. A state-dependent reflex-based controller optimized for a function combining energy cost, muscle activation squared and head acceleration was used to simulate gait. For validation, strength of the plantarflexors was reduced by 80 % and simulated gait compared with experimental data of 16 subjects with bilateral plantarflexor weakness. Subsequently, strength of the plantarflexors was reduced stepwise to evaluate its effect on gait kinematics and kinetics, walking energy cost and speed. Results: Simulations with 80 % weakness matched well with experimental hip and ankle kinematics and kinetics (R > 0.64), but less for knee kinetics (R < 0.55). With incremental strength reduction, especially beyond a reduction of 60 %, the maximal ankle moment and power decreased. Walking energy cost and speed showed a strong quadratic relation (R2>0.82) with plantarflexor strength. Significance: Our simulation framework predicted most gait changes due to bilateral plantarflexor weakness, and indicates t, Biomechatronics & Human-Machine Control

Background: Bilateral plantarflexor muscle weakness is a common impairment in many neuromuscular diseases. However, the way in which severity of plantarflexor weakness affects gait in terms of walking energy cost and speed is not fully understood. Predictive simulations are an attractive alternative to human experiments as simulations allow systematic alterations in muscle weakness. However, simulations of pathological gait have not yet been validated against experimental data, limiting their applicability. Research question: Our first aim was to validate a predictive simulation framework for walking with bilateral plantarflexor weakness by comparing predicted gait against experimental gait data of patients with bilateral plantarflexor weakness. Secondly, we aimed to evaluate how incremental levels of bilateral plantarflexor weakness affect gait. Methods: We used a planar musculoskeletal model with 9 degrees of freedom and 9 Hill-type muscle-tendon units per leg. A state-dependent reflex-based controller optimized for a function combining energy cost, muscle activation squared and head acceleration was used to simulate gait. For validation, strength of the plantarflexors was reduced by 80 % and simulated gait compared with experimental data of 16 subjects with bilateral plantarflexor weakness. Subsequently, strength of the plantarflexors was reduced stepwise to evaluate its effect on gait kinematics and kinetics, walking energy cost and speed. Results: Simulations with 80 % weakness matched well with experimental hip and ankle kinematics and kinetics (R > 0.64), but less for knee kinetics (R < 0.55). With incremental strength reduction, especially beyond a reduction of 60 %, the maximal ankle moment and power decreased. Walking energy cost and speed showed a strong quadratic relation (R2>0.82) with plantarflexor strength. Significance: Our simulation framework predicted most gait changes due

01 februari 2020, Contains fulltext : 220990.pdf (Publisher’s version ) (Closed access), PURPOSE: Fatigue is a common and potentially disabling symptom in patients with cancer. It can often be effectively reduced by exercise. Yet, effects of exercise interventions might differ across subgroups. We conducted a meta-analysis using individual patient data of randomized controlled trials (RCT) to investigate moderators of exercise intervention effects on cancer-related fatigue. METHODS: We used individual patient data from 31 exercise RCT worldwide, representing 4366 patients, of whom 3846 had complete fatigue data. We performed a one-step individual patient data meta-analysis, using linear mixed-effect models to analyze the effects of exercise interventions on fatigue (z score) and to identify demographic, clinical, intervention- and exercise-related moderators. Models were adjusted for baseline fatigue and included a random intercept on study level to account for clustering of patients within studies. We identified potential moderators by testing their interaction with group allocation, using a likelihood ratio test. RESULTS: Exercise interventions had statistically significant beneficial effects on fatigue (beta = -0.17; 95% confidence interval [CI], -0.22 to -0.12). There was no evidence of moderation by demographic or clinical characteristics. Supervised exercise interventions had significantly larger effects on fatigue than unsupervised exercise interventions (betadifference = -0.18; 95% CI -0.28 to -0.08). Supervised interventions with a duration