Search

We measured the harmonic-space power spectrum of galaxy clustering auto-correlation from the Evolutionary Map of the Universe Pilot Survey 1 data (EMU PS1) and its cross-correlation with the lensing convergence map of cosmic microwave background (CMB) from Planck Public Release 4 at the linear scale range from $\ell=2$ to 500. We applied two flux density cuts at $0.18$ and $0.4$mJy on the radio galaxies observed at 944MHz and considered two source detection algorithms. We found the auto-correlation measurements from the two algorithms at the 0.18mJy cut to deviate for $\ell\gtrsim250$ due to the different criteria assumed on the source detection and decided to ignore data above this scale. We report a cross-correlation detection of EMU PS1 with CMB lensing at $\sim$5.5$\sigma$, irrespective of flux density cut. In our theoretical modelling we considered two redshift distribution simulation models that yield consistent results, a linear and a non-linear matter power spectrum, and two linear galaxy bias models. That is a constant redshift-independent galaxy bias $b(z)=b_g$ and a constant amplitude galaxy bias $b(z)=b_g/D(z)$. By fixing a cosmology model and considering a non-linear matter power spectrum, we measured a constant galaxy bias at $0.18$mJy ($0.4$mJy) with $b_g=2.32^{+0.41}_{-0.33}$ ($2.18^{+0.17}_{-0.25}$) and a constant amplitude bias with $b_g=1.72^{+0.31}_{-0.21}$ ($1.78^{+0.22}_{-0.15}$). When $\sigma_8$ is a free parameter for the same models at $0.18$mJy ($0.4$mJy) with the constant model we found $\sigma_8=0.68^{+0.16}_{-0.14}$ ($0.82\pm0.10$), while with the constant amplitude model we measured $\sigma_8=0.61^{+0.18}_{-0.20}$ ($0.78^{+0.11}_{-0.09}$), respectively. Our results agree at $1\sigma$ with the measurements from Planck CMB and the weak lensing surveys and also show the potential of cosmology studies with future radio continuum survey data., Comment: To be submitted to PASA. 22 pages, 9 figures, 4 tables

Spectroastrometry, which measures wavelength-dependent shifts in the center of light, is well-suited for studying objects whose morphology changes with wavelength at very high angular resolutions. Photonic lantern (PL)-fed spectrometers have potential to enable measurement of spectroastrometric signals because the relative intensities between the PL output SMFs contain spatial information on the input scene. In order to use PL output spectra for spectroastrometric measurements, it is important to understand the wavelength-dependent behaviors of PL outputs and develop methods to calibrate the effects of time-varying wavefront errors in ground-based observations. We present experimental characterizations of the 3-port PL on the SCExAO testbed at the Subaru Telescope. We develop spectral response models of the PL and verify the behaviors with lab experiments. We find sinusoidal behavior of astrometric sensitivity of the 3-port PL as a function of wavelength, as expected from numerical simulations. Furthermore, we compare experimental and numerically simulated coupling maps and discuss their potential use for offsetting pointing errors. We then present a method of building PL spectral response models (solving for the transfer matrices as a function of wavelength) using coupling maps, which can be used for further calibration strategies., Comment: Accepted for publication in the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)

Background: Brain maturation and aging involve significant microstructural changes, resulting in functional and cognitive alterations. Quantitative MRI (qMRI) can measure this evolution, distinguishing the physiological effects of normal aging from pathological deviations. Methods: We conducted a multicentre study using qMRI metrics (R1, R2*, and Quantitative Susceptibility Mapping) to model age trajectories across brain structures, including tractography-based white matter bundles (TWMB), superficial white matter (SWM), and cortical grey matter (CGM). MRI data from 537 healthy subjects, aged 8 to 79 years, were harmonized using two independent methods. We modeled age trajectories and performed regional analyses to capture maturation patterns and aging effects across the lifespan. Findings: Our findings revealed a distinct brain maturation gradient, with early qMRI peak values in TWMB, followed by SWM, and culminating in CGM regions. This gradient was observed as a posterior-to-anterior maturation pattern in the cortex and an inferior-to-superior maturation pattern in white matter tracts. R1 demonstrated the most robust age trajectories, while R2* and susceptibility exhibited greater variability and different patterns. The normative modeling framework confirmed the reliability of our age-modelled trajectories across datasets. Interpretation: Our study highlights the potential of multiparametric qMRI to capture complex, region-specific brain development patterns, addressing the need for comprehensive, age-spanning studies across multiple brain structures. Various harmonization strategies can merge qMRI cohorts, improving the robustness of qMRI-based age models and facilitating the understanding of normal patterns and disease-associated deviations.

We present significant upgrades to the VAMPIRES instrument, a visible-light (600 nm to 800 nm) high-contrast imaging polarimeter integrated within SCExAO on the Subaru telescope. Key enhancements include new qCMOS detectors, coronagraphs, polarization optics, and a multiband imaging mode, improving sensitivity, resolution, and efficiency. These upgrades position VAMPIRES as a powerful tool for studying sub-stellar companions, accreting protoplanets, circumstellar disks, stellar jets, stellar mass-loss shells, and solar system objects. The instrument achieves angular resolutions from 17 mas to 21 mas and Strehl ratios up to 60\%, with 5$\sigma$ contrast limits of $10^{\text{-}4}$ at 0.1'' to $10^{\text{-}6}$ beyond 0.5''. We demonstrate these capabilities through spectro-polarimetric coronagraphic imaging of the HD 169142 circumstellar disk, ADI+SDI imaging of the sub-stellar companion HD 1160B, narrowband H$\alpha$ imaging of the R Aqr emission nebula, and spectro-polarimetric imaging of Neptune., Comment: 36 pages, 33 figures, accepted to PASP

Following work of Brundan and Kleshchev (2000), which considered tensor products with the natural module (and its dual) for $\text{GL}(n)$, we take the next fundamental module and explore the relationship between multiplicities of composition factors of tensor products of simple modules for $\text{GL}(n)$ and branching multiplicities. In doing this we provide a method for determining the composition multiplicities for some composition factors of tensor products of simple modules with the wedge square of the dual natural module.

The sky-averaged brightness temperature of the 21cm line from neutral hydrogen provides a sensitive probe of the thermal state of the intergalactic medium, particularly before and during Cosmic Dawn and the Epoch of Reionisation. This `global signal' is faint, on the order of tens to hundreds of millikelvin, and spectrally relatively smooth, making it exceedingly difficult to disentangle from foreground radio emission and instrumental artefacts. In this paper, we introduce RHINO, an experiment based around a large horn antenna operating from 60-85 MHz. Horn antennas are highly characterisable and provide excellent shielding from their immediate environment, which are potentially decisive advantages when it comes to the beam measurement and modelling problems that are particularly challenging for this kind of experiment. The system also includes a novel continuous wave calibration source to control correlated gain fluctuations, allowing continuous monitoring of the overall gain level without needing to rapidly switch between the sky and a calibration source. Here, we describe the basic RHINO concept, including the antenna design, EM simulations, and receiver electronics. We use a basic simulation and analysis pipeline to study the impact of the limited bandwidth on recovery of physical 21cm global signal model parameters, and discuss a basic calibration scheme that incorporates the continuous wave signal. Finally, we report on the current state of a scaled-down prototype system under construction at Jodrell Bank Observatory., Comment: 15 pages, 14 figures. Comments welcome

Our team developed a riding ballbot (called PURE) that is dynamically stable, omnidirectional, and driven by lean-to-steer control. A hands-free admittance control scheme (HACS) was previously integrated to allow riders with different torso functions to control the robot's movements via torso leaning and twisting. Such an interface requires motor coordination skills and could result in collisions with obstacles due to low proficiency. Hence, a shared controller (SC) that limits the speed of PURE could be helpful to ensure the safety of riders. However, the self-balancing dynamics of PURE could result in a weak control authority of its motion, in which the torso motion of the rider could easily result in poor tracking of the command speed dictated by the shared controller. Thus, we proposed an interactive hands-free admittance control scheme (iHACS), which added two modules to HACS to improve the speed-tracking performance of PURE: control gain personalization module and interaction compensation module. Human riding tests of simple tasks, idle-keeping and speed-limiting, were conducted to compare the performance of HACS and iHACS. Two manual wheelchair users and two able-bodied individuals participated in this study. They were instructed to use "adversarial" torso motions that would tax the SC's ability to keep the ballbot idling or below a set speed. In the idle-keeping tasks, iHACS demonstrated minimal translational motion and low command speed tracking RMSE, even with significant torso lean angles. During the speed-limiting task with command speed saturated at 0.5 m/s, the system achieved an average maximum speed of 1.1 m/s with iHACS, compared with that of over 1.9 m/s with HACS. These results suggest that iHACS can enhance PURE's control authority over the rider, which enables PURE to provide physical interactions back to the rider and results in a collaborative rider-robot synergy.

This study introduces the development of hands-free control schemes for a riding ballbot, designed to allow riders including manual wheelchair users to control its movement through torso leaning and twisting. The hardware platform, Personal Unique Rolling Experience (PURE), utilizes a ballbot drivetrain, a dynamically stable mobile robot that uses a ball as its wheel to provide omnidirectional maneuverability. To accommodate users with varying torso motion functions, the hanads-free control scheme should be adjustable based on the rider's torso function and personal preferences. Therefore, concepts of (a) impedance control and (b) admittance control were integrated into the control scheme. A duo-agent optimization framework was utilized to assess the efficiency of this rider-ballbot system for a safety-critical task: braking from 1.4 m/s. The candidate control schemes were further implemented in the physical robot hardware and validated with two experienced users, demonstrating the efficiency and robustness of the hands-free admittance control scheme (HACS). This interface, which utilized physical human-robot interaction (pHRI) as the input, resulted in lower braking effort and shorter braking distance and time. Subsequently, 12 novice participants (six able-bodied users and six manual wheelchair users) with different levels of torso motion capability were then recruited to benchmark the braking performance with HACS. The indoor navigation capability of PURE was further demonstrated with these participants in courses simulating narrow hallways, tight turns, and navigation through static and dynamic obstacles. By exploiting pHRI, the proposed admittance-style control scheme provided effective control of the ballbot via torso motions. This interface enables PURE to provide a personal unique rolling experience to manual wheelchair users for safe and agile indoor navigation.

Backstepping Control of Linear and Nonlinear Systems (BaCLNS) is a Python package developed to automate the design, simulation, and analysis of backstepping control laws for both linear and nonlinear control-affine systems. By providing a standardized framework, BaCLNS simplifies the process of deriving backstepping controllers, making this powerful control technique more accessible to engineers, researchers, and educators. The package handles complex system dynamics, ensuring robust stabilization even in the presence of significant nonlinearities. BaCLNS's modular design allows users to define custom control systems, simulate their behavior , and visualize the results all within a user-friendly environment. The effectiveness of the package is demonstrated through a series of illustrative examples, ranging from simple linear systems to chaotic nonlinear systems, including the Vaidyanathan Jerk System, the pendulum and the Van der Pol Oscillator., Comment: 9 pages, 13 Figures , Submitting to Journal of SoftwareX

Traditionally, high energy physics (HEP) experiments have relied on x86 CPUs for the majority of their significant computing needs. As the field looks ahead to the next generation of experiments such as DUNE and the High-Luminosity LHC, the computing demands are expected to increase dramatically. To cope with this increase, it will be necessary to take advantage of all available computing resources, including GPUs from different vendors. A broad landscape of code portability tools -- including compiler pragma-based approaches, abstraction libraries, and other tools -- allow the same source code to run efficiently on multiple architectures. In this paper, we use a test code taken from a HEP tracking algorithm to compare the performance and experience of implementing different portability solutions.

This study introduces a shared-control approach for collision avoidance in a self-balancing riding ballbot, called PURE, marked by its dynamic stability, omnidirectional movement, and hands-free interface. Integrated with a sensor array and a novel Passive Artificial Potential Field (PAPF) method, PURE provides intuitive navigation with deceleration assistance and haptic/audio feedback, effectively mitigating collision risks. This approach addresses the limitations of traditional APF methods, such as control oscillations and unnecessary speed reduction in challenging scenarios. A human-robot interaction experiment, with 20 manual wheelchair users and able-bodied individuals, was conducted to evaluate the performance of indoor navigation and obstacle avoidance with the proposed shared-control algorithm. Results indicated that shared-control significantly reduced collisions and cognitive load without affecting travel speed, offering intuitive and safe operation. These findings highlight the shared-control system's suitability for enhancing collision avoidance in self-balancing mobility devices, a relatively unexplored area in assistive mobility research., Comment: 7 pages and 7 figures, IEEE ICRA format

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional, Comment: Accepted in Astronomy and Astrophysics journal on 9/11/2024

We describe the motivation, design, and early results for our 42-night, 125 star Subaru/SCExAO direct imaging survey for planets around accelerating stars. Unlike prior large surveys, ours focuses only on stars showing evidence for an astrometric acceleration plausibly due to the dynamical pull of an unseen planet or brown dwarf. Our program is motivated by results from a recent pilot program that found the first planet jointly discovered from direct imaging and astrometry and resulted in a planet and brown dwarf discovery rate substantially higher than previous unbiased surveys like GPIES. The first preliminary results from our program reveal multiple new companions; discovered planets and brown dwarfs can be further characterized with follow-up data, including higher-resolution spectra. Finally, we describe the critical role this program plays in supporting the Roman Space Telescope Coronagraphic Instrument, providing a currently-missing list of targets suitable for the CGI technological demonstration without which the CGI tech demo risks failure., Comment: 13 pages, 7 figures; Proc. SPIE in press

The petaling effect, induced by pupil fragmentation from the telescope spider, drastically affects the performance of high contrast instruments by inducing core splitting on the PSF. Differential piston/tip/tilt aberrations within each optically separated fragment of the pupil are poorly measured by commonly used Adaptive Optics (AO) systems. We here pursue a design of dedicated low-order wavefront sensor -- or petalometers -- to complement the main AO. Interferometric devices sense differential aberrations between fragments with optimal sensitivity; their weakness though is their limitation to wrapped phase measurements. We show that by combining multiple spectral channels, we increase the capture range for petaling aberrations beyond several microns, enough to disambiguate one-wave wrapping errors made by the main AO system. We propose here to implement a petalometer from the multi-wavelength imaging mode of the VAMPIRES visible-light instrument, deployed on SCExAO at the Subaru Telescope. The interferometric measurements obtained in four spectral channels through a 7 hole non-redundant mask allow us to effiiently reconstruct diffierential piston between pupil petals., Comment: Paper 13097-89 from SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

Most galaxies follow well-defined scaling relations of metallicity and stellar mass; however, some outliers at the low mass end of the observed galaxy population exhibit unusually high metallicity for their mass. Understanding how these objects get to be so metal-rich is vital for understanding the role of feedback in galaxy formation. Using the TNG50 simulation, we explore the origins of this phenomenon. We identify 227 metal-rich, Compact Stellar Systems (CSSs) that deviate significantly from this scaling relation. These CSSs are satellites located in the vicinity of massive host galaxies, with stellar masses ranging from $10^{8} M_{\odot}$ to $10^{10} M_{\odot}$ (including six systems that are close analogs of the M31-M32 system). Contrary to the previously assumed scenario that such objects are predominantly products of tidal stripping, our results suggest a more prevalent role for ram pressure in their formation. Indeed, 76\% (173) of these CSSs are formed through a burst of star formation occurring around the time of the first pericentric passage, typically at redshifts $z\lesssim1$, aided by strong ram pressure and tidal forces. The high ram pressure, resulting from the CSSs' rapid motion near the halo center, facilitates metal enrichment, producing high-metallicity CSSs by confining the metal-rich gas from bursty star formation, which leads to distinct stellar populations characterized by enhanced metallicity as well as high $\alpha$-abundance. Only the remaining 24\% (54) of metal-rich CSSs are generated through the tidal stripping of massive progenitors. Our results further indicate that M32 is more likely to have formed through intense star formation events rather than through gradual, tidal stripping, thereby providing crucial insights into the nature of low mass, compact galaxy formation., Comment: 28 pages, 13 figures. Submitted

The forced time harmonic response of a spatiotemporally-modulated elastic beam of finite length with light damping is derived using a novel Green's function approach. Closed-form solutions are found that highlight unique mode coupling effects that are induced by spatiotemporal modulation, such as split resonances that are tunable with the modulation parameters. These effects of order unity are caused by spatiotemporal modulation with small amplitude appropriately scaled to the magnitude of the light damping. The scalings identified here between the modulation amplitude, the damping, and the inner range of frequency near the modified resonances, translate over to more complicated and higher dimensional elastic systems., Comment: 14 pages, 5 figures

To support and enhance educational attainment in the United States, the Lumina Foundation established a national goal of 60% of adults earning a high-quality credential by 2025. To achieve this goal, the Lumina Foundation expanded its funding to the adult learner population in 2017 by establishing the Adult Promise Initiative. The organization recognizes and values diversity, equity, and inclusion in its work and understands how minority-serving institutions, such as Historically Black Colleges and Universities (HBCUs), are integral to the proliferation of Black adult learners. Recognizing the tremendous impact HBCUs have on the educational attainment of Black Adult Learners, we must identify their curricular and co-curricular best practices that are critical to the academic success of this population. This report will provide an overview of these best practices for faculty, staff, and students of the five HBCUs participating in the Lumina Adult Learner Initiative grant. The organization of this report will include a brief review of the Adult Learner Initiative grant and its components, followed by the best practices frequently discussed among faculty, staff, and students participating in the grant and recommendations. The authors will then review Lumina's philanthropic approach to the grant. Lastly, how staff and administrators define capacity-building for the adult learner population will be examined.

Astrophotonics represents a cutting-edge approach in observational astronomy. This paper explores the significant advancements and potential applications of astrophotonics, highlighting how photonic technologies stand to revolutionise astronomical instrumentation. Key areas of focus include photonic wavefront sensing and imaging, photonic interferometry and nulling, advanced chip fabrication methods, and the integration of spectroscopy and sensing onto photonic chips. The role of single-mode fibres in reducing modal noise, and the development of photonic integral field units (IFUs) and arrayed waveguide gratings (AWGs) for high-resolution, spatially resolved spectroscopy will be examined. As part of the Sydney regional-focus issue, this review aims to detail some of the current technological achievements in this field as well as to discuss the future trajectory of astrophotonics, underscoring its potential to unlock important new astronomical discoveries., Comment: Published version available at https://opg.optica.org/ao/fulltext.cfm?uri=ao-63-24-6393&id=554618

We present the serendipitous discovery of a new radio-continuum ring-like object nicknamed Kyklos (J1802-3353), with MeerKAT UHF and L-band observations. The radio ring, which resembles the recently discovered odd radio circles (ORCs), has a diameter of 80 arcsec and is located just 6 deg from the Galactic plane. However, Kyklos exhibits an atypical thermal radio-continuum spectrum ({\alpha} = -0.1 +/- 0.3), which led us to explore different possible formation scenarios. We concluded that a circumstellar shell around an evolved massive star, possibly a Wolf-Rayet, is the most convincing explanation with the present data., Comment: 7 pages, 5 figures, accepted in A&A

Massive evolved stars such as red supergiants and hypergiants are potential progenitors of Type II supernovae, and they are known for ejecting substantial amounts of matter, up to half their initial mass, during their final evolutionary phases. The rate and mechanism of this mass loss play a crucial role in determining their ultimate fate and the likelihood of their progression to supernovae. However, the exact mechanisms driving this mass ejection have long been a subject of research. Recent observations, such as the Great Dimming of Betelgeuse, have suggested that the activity of large convective cells, combined with pulsation, could be a plausible explanation for such mass loss events. In this context, we conducted interferometric observations of the famous yellow hypergiant, $\rho$ Cassiopeiae using the CHARA Array in H and K-band wavelengths. $\rho$ Cas is well known for its recurrent eruptions, characterized by periods of visual dimming ($\sim$1.5-2 mag) followed by recovery. From our observations, we derived the diameter of the limb-darkened disk and found that this star has a radius of $1.04\pm0.01$ milliarcseconds (mas), or $564 - 700 R_\odot$. We performed image reconstructions with three different image reconstruction software packages, and they unveiled the presence of giant hot and cold spots on the stellar surface. We interpret these prominent hot spots as giant convection cells, suggesting a possible connection to mass ejections from the star's envelope. Furthermore, we detected spectral CO emission lines in the K-band ($\lambda=2.31-2.38 \mu$m), and the image reconstructions in these spectral lines revealed an extended circumstellar envelope with a radius of $1.45\pm0.10$ mas., Comment: 21 pages, 13 figures, 4 tables, Accepted by ApJ

The dominant contribution to the energy relaxation of state-of-the-art superconducting qubits is often attributed to their coupling to an ensemble of material defects which behave as two-level systems. These defects have varying microscopic characteristics which result in a large range of observable defect properties such as resonant frequencies, coherence times and coupling rates to qubits $g$. Here, we investigate strategies to mitigate losses to the family of defects that strongly couple to qubits ($g/2\pi\ge$ 0.5 MHz). Such strongly coupled defects are particularly detrimental to the coherence of qubits and to the fidelities of operations relying on frequency excursions, such as flux-activated two-qubit gates. To assess their impact, we perform swap spectroscopy on 92 frequency-tunable qubits and quantify the spectral density of these strongly coupled modes. We show that the frequency configuration of the defects is rearranged by warming up the sample to room temperature, whereas the total number of defects on a processor tends to remain constant. We then explore methods for fabricating qubits with a reduced number of strongly coupled defect modes by systematically measuring their spectral density for decreasing Josephson junction dimensions and for various surface cleaning methods. Our results provide insights into the properties of strongly coupled defect modes and show the benefits of minimizing Josephson junction dimensions to improve qubit properties.

GLINT is a nulling interferometer downstream of the SCExAO extreme-adaptive-optics system at the Subaru Telescope (Hawaii, USA), and is a pathfinder instrument for high-contrast imaging of circumstellar environments with photonic technologies. GLINT is effectively a testbed for more stable, compact, and modular instruments for the era of 30m-class telescopes. GLINT is now undergoing an upgrade with a new photonic chip for more achromatic nulls, and for phase information to enable fringe tracking. Here we provide an overview of the motivations for the GLINT project and report on the design of the new chip, the on-site installation, and current status., Comment: Proc. SPIE Astronomical Telescopes + Instrumentation 2024 (Yokohama, Japan), Optical and Infrared Interferometry and Imaging IX

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution., Comment: Proceeding published in SPIE Astronomical Telescopes + Instrumentation (2024) - Paper number 13096-25

Transition metal dichalcogenides (TMDs) are layered two-dimensional semiconductors explored for various optoelectronic applications, ranging from light-emitting diodes to single-photon emitters. To interact strongly with light, such devices require monolayer TMDs, which exhibit a direct bandgap. These atomically thin sheets are typically obtained through mechanical exfoliation followed by manual identification with a brightfield optical microscope. While this traditional procedure provides high-quality crystals, the identification step is time-intensive, low-throughput, and prone to human error, creating a significant bottleneck for TMD research. Here, we report a simple and fully automated approach for high-throughput identification of TMD monolayers using photoluminescence microscopy. Compared to a manual search and verification, our methodology offers a four-orders-of-magnitude decrease in the time a researcher must invest per identified monolayer. This ability enables us to measure geometric and photoluminescence-intensity features of more than 2,400 monolayers and bilayers of WSe$_2$, MoSe$_2$, and MoS$_2$. Due to these large numbers, we can study and quantify material properties previously inaccessible. For example, we show that the mean photoluminescence intensity from a monolayer correlates with its size due to reduced emission from its edges. Further, we observe large variations in brightness (up to 10$\times$) from WSe$_2$ monolayers of different batches produced by the same supplier. Therefore, our automated approach not only increases fabrication efficiency but also enhances sample quality for optoelectronic devices of atomically thin semiconductors.

Chemical syntheses that provide nanocrystals (NCs) with narrow distributions in size and shape are critical for NC research. This has led to the investigation of magic-sized NCs (MSNCs), a class of semiconductor crystallites that grow in discrete steps, potentially offering a single size and shape (i.e., monodispersity). However, the photoluminescence (PL) spectra of CdSe MSNCs measured at room temperature have been reported to be broader than those of state-of-the-art quantum dots. This difference could be due to the smaller size of MSNCs, which broadens their line widths, or due to their residual size dispersity. To better understand the optical performance of MSNCs, here we perform single-particle spectroscopy. Our results show that, while CdSe MSNCs do exhibit particle-to-particle variations that lead to modest broadening of their ensemble emission spectra, the largest contribution comes from the single-particle line width. By examining MSNCs with different sizes and shells, we conclude that this single-particle broadening is consistent with exciton coupling to acoustic phonons from the NC surface. Because of their small size, this coupling and the role of residual size dispersity have a larger impact on the ensemble emission line widths. Notably, when small (<2.7 nm diameter) MSNCs and quantum dots are compared, the ensemble PL line widths of MSNCs are actually sharper. Due to their small size, MSNCs also exhibit strong anti-bunching $[g^{(2)}(0) \sim 0.05]$ at room temperature. Thus, MSNCs represent a bright, spectrally pure class of quantum emitter, useful for applications in optoelectronic and quantum-information technologies where strong three-dimensional confinement is required.

Discovering new actively-accreting protoplanets is crucial to answering open questions about planet formation. However, identifying such planets at orbital distances where they are expected to be abundant is extremely challenging, both due to the technical requirements and large distances to star-forming regions. Here we use the kernel phase interferometry (KPI) technique to search for companions around the $\sim$6 and $\sim$8 Myr old Herbig Ae stars MWC 758 and MWC 480. KPI is a data analysis technique which is sensitive to moderate asymmetries, arising from eg. a circumstellar disk or companions with contrasts of up to 6-8 mags, at separations down to and even below the classical Rayleigh diffraction limit ($\sim 1.2\lambda / D$). Using the high spectral resolution K-band mode of the SCExAO/CHARIS integral field spectrograph, we search for both excess Br-$\gamma$ line emission and continuum emission from companions around MWC 480 and MWC 758. We are able to set limits on the presence of rapidly accreting protoplanets and brown dwarfs between 4 and 16 au, well interior to those of previous studies. In Br-$\gamma$, we set limits on excess line emission equivalent to accretion rates ranging from $10^{-5} M_{j}^{2}.yr^{-1}$ to $10^{-6}M_{j}^{2}.yr^{-1}$. Our achievable contrasts demonstrate that KPI using SCExAO/CHARIS is a promising technique to search for giant accreting protoplanets at smaller separations compared to conventional imaging., Comment: 8 pages, 4 figures

Nulling interferometry is a powerful observing technique to reach exoplanets and circumstellar dust at separations too small for direct imaging with single-dish telescopes and too large for indirect methods. With near-future instrumentation, it bears the potential to detect young, hot planets near the snow lines of their host stars. A future space mission could detect and characterize a large number of rocky, habitable-zone planets around nearby stars at thermal-infrared wavelengths. The null self-calibration is a method aiming at modelling the statistical distribution of the nulled signal. It has proven to be more sensitive and accurate than average-based data reduction methods in nulling interferometry. This statistical approach opens the possibility of designing a GPU-based Python package to reduce the data from any of these instruments, by simply providing the data and a simulator of the instrument. GRIP is a toolbox to reduce nulling and interferometric data based on the statistical self-calibration method. In this article, we present the main features of GRIP as well as applications on real data.

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

Standard methods for estimating production functions in the Olley and Pakes (1996) tradition require assumptions on input choices. We introduce a new method that exploits (increasingly available) data on a firm's expectations of its future output and inputs that allows us to obtain consistent production function parameter estimates while relaxing these input demand assumptions. In contrast to dynamic panel methods, our proposed estimator can be implemented on very short panels (including a single cross-section), and Monte Carlo simulations show it outperforms alternative estimators when firms' material input choices are subject to optimization error. Implementing a range of production function estimators on UK data, we find our proposed estimator yields results that are either similar to or more credible than commonly-used alternatives. These differences are larger in industries where material inputs appear harder to optimize. We show that TFP implied by our proposed estimator is more strongly associated with future jobs growth than existing methods, suggesting that failing to adequately account for input endogeneity may underestimate the degree of dynamic reallocation in the economy.

We present radio observations of the galaxy cluster Abell S1136 at 888 MHz, using the Australian Square Kilometre Array Pathfinder radio telescope, as part of the Evolutionary Map of the Universe Early Science program. We compare these findings with data from the Murchison Widefield Array, XMM-Newton, the Wide-field Infrared Survey Explorer, the Digitised Sky Survey, and the Australia Telescope Compact Array. Our analysis shows the X-ray and radio emission in Abell S1136 are closely aligned and centered on the BCG, while the X-ray temperature profile shows a relaxed cluster with no evidence of a cool core. We find that the diffuse radio emission in the centre of the cluster shows more structure than seen in previous low-resolution observations of this source, which appeared formerly as an amorphous radio blob, similar in appearance to a radio halo; our observations show the diffuse emission in the Abell S1136 galaxy cluster contains three narrow filamentary structures visible at 888 MHz, between$\sim 80$ and 140 kpc in length; however the properties of the diffuse emission do not fully match that of a radio (mini-)halo or (fossil) tailed radio source., Comment: To appear in PASA

We present a complete census of candidate nuggets, i.e., dense galaxies likely formed by compaction with intense gas influx, within the volume-limited $z \sim 0$ REsolved Spectroscopy Of a Local VolumE (RESOLVE) survey. These nuggets span all evolutionary stages and 3 orders of magnitude in stellar mass ($M_{*} \sim 10^{8} M_\odot$ to $10^{11} M_\odot$) from the dwarf to the giant regime. We develop selection criteria for our $z\sim0$ nugget candidates based on structure and introduce the use of environmental criteria to eliminate nugget-like objects with suspected non-compaction origins. The resulting $z\sim0$ nuggets follow expectations with respect to structure (i.e., density, size), population frequency, and likely origins. We show that the properties of our nugget census are consistent with permanent quenching above the gas-richness threshold scale (halo mass $M_{halo} \sim 10^{11.4} M_\odot$), cyclic temporary quenching below the threshold scale, and feedback from active galactic nuclei (AGN) assisting in permanent quenching. As predicted in simulations, most nuggets quench within the halo mass range $M_{halo} \sim 10^{11.45} M_\odot$ to $10^{11.9} M_\odot$. We find $\sim 0.29$ dex scatter around the star-forming main sequence for candidate blue nuggets below the threshold scale, which is consistent with temporary quenching as seen in simulations. A transitional population of green nuggets appears above the threshold scale. AGN also become more common in nuggets above this scale, and we see a likely AGN excess in nuggets vs. comparably selected non-nuggets. Our results provide the first observational confirmation of the mass-dependent, AGN-mediated shift from cyclic quenching to halo quenching in nuggets., Comment: 18 pages, 14 figures

We present an updated ephemeris and physical parameters for the exoplanet WASP-77 A b. In this effort, we combine 64 ground- and space-based transit observations, 6 space-based eclipse observations, and 32 radial velocity observations to produce the most precise orbital solution to date for this target, aiding in the planning of James Webb Space Telescope (JWST) and Ariel observations and atmospheric studies. We report a new orbital period of 1.360029395 +- 5.7e-8 days, a new mid-transit time of 2459957.337860 +- 4.3e-5 BJDTDB (Barycentric Julian Date in the Barycentric Dynamical Time scale; arXiv:1005.4415) and a new mid-eclipse time of 2459956.658192 +- 6.7e-5 BJDTDB. Furthermore, the methods presented in this study reduce the uncertainties in the planet mass to 1.6654 +- 4.5e-3 Mjup and orbital period to 1.360029395 +- 5.7e-8 days by factors of 15.1 and 10.9, respectively. Through a joint fit analysis comparison of transit data taken by space-based and citizen science-led initiatives, our study demonstrates the power of including data collected by citizen scientists compared to a fit of the space-based data alone. Additionally, by including a vast array of citizen science data from ExoClock, Exoplanet Transit Database (ETD), and Exoplanet Watch, we can increase our observational baseline and thus acquire better constraints on the forward propagation of our ephemeris than what is achievable with TESS data alone., Comment: Updated a co-author name. Added a co-author. Added an acknowledgement

In this paper, a synergistic computational/experimental approach is presented for the rapid discovery and characterization of novel alloys within the compositionally complex (i.e., "medium/high entropy") refractory alloy space of Ti-V-Nb-Mo-Hf-Ta-W. This was demonstrated via a material design cycle aimed at simultaneously maximizing the objective properties of high specific hardness (hardness normalized by density) and high specific elastic modulus (elastic modulus normalized by density). This framework utilizes high-throughput computational thermodynamics and intelligent filtering to first reduce the untenably large alloy space to a feasible size, followed by an iterative design cycle comprised of high-throughput synthesis, processing, and characterization in batch sizes of 24 alloys. After the first iteration, Bayesian optimization was utilized to inform selection of the next batch of 24 alloys. This paper demonstrates the benefit of using batch Bayesian optimization (BBO) in material design, as significant gains in the objective properties were observed after only two iterations or "shots" of the design cycle without using any prior knowledge or physical models of how the objective properties relate to the design inputs (i.e., composition). Specifically, the hypervolume of the Pareto front increased by 54% between the first and second iterations. Furthermore, 10 of the 24 alloys in the second iteration dominated all alloys from the first iteration.

Among the bent tail radio galaxies common in galaxy clusters are some with long, collimated tails (so-called head-tail galaxies) shaped by their interactions with the intracluster medium (ICM). Here we report the discovery of intricate filamentary structure in and beyond the ~28' (570 kpc) long, helical radio tail of the Corkscrew Galaxy (1610-60.5, ESO137-G007), which resides in the X-ray bright cluster Abell 3627 (D = 70 Mpc). Deep radio continuum data were obtained with wide-field Phased Array Feeds on the Australian Square Kilometer Array Pathfinder (ASKAP) at 944 MHz and 1.4 GHz. The Corkscrew Galaxy is located 15' north of the prominent wide-angle tail (WAT) radio galaxy 1610-60.8 (ESO137-G006) near the cluster centre. While the bright (young) part of its radio tail is highly collimated, the faint (old) part shows increasing oscillation amplitudes, break-ups, and filaments. We find a stunning set of arc-shaped radio filaments beyond and mostly orthogonal to the collimated Corkscrew tail end, forming a partial bubble. This may be the first detection of a "proto-lobe" seen in 3D MHD simulations by Nolting et al. (2019), formed by the face-on impact of the Corkscrew Galaxy with a shock front in the cluster outskirts. Interactions of the radio galaxy tail with the ICM are likely responsible for the tail collimation and shear forces within the ICM for its increasingly filamentary structure. We also report the discovery of small (~20-30 kpc) ram-pressure stripped radio tails in four Abell 3627 cluster galaxies., Comment: 11 pages, 7 figures, MNRAS, submitted

We present the discovery of large radio shells around a massive pair of interacting galaxies and extended diffuse X-ray emission within the shells. The radio data were obtained with the Australian Square Kilometer Array Pathfinder (ASKAP) in two frequency bands centred at 944 MHz and 1.4 GHz, respectively, while the X-ray data are from the XMM-Newton observatory. The host galaxy pair, which consists of the early-type galaxies ESO 184-G042 and LEDA 418116, is part of a loose group at a distance of only 75 Mpc (redshift z = 0.017). The observed outer radio shells (diameter ~ 145 kpc) and ridge-like central emission of the system, ASKAP J1914-5433 (Physalis), are likely associated with merger shocks during the formation of the central galaxy (ESO 184-G042) and resemble the new class of odd radio circles (ORCs). This is supported by the brightest X-ray emission found offset from the centre of the Physalis system, instead centered at the less massive galaxy, LEDA 418116. The host galaxy pair is embedded in an irregular envelope of diffuse light, highlighting on-going interactions. We complement our combined radio and X-ray study with high-resolution simulations of the circumgalactic medium (CGM) around galaxy mergers from the Magneticum project to analyse the evolutionary state of the Physalis system. We argue that ORCs / radio shells could be produced by a combination of energy release from the central AGN and subsequent lightening up in radio emission by merger shocks traveling through the CGM of these systems., Comment: 12 pages, 8 figures, submitted to MNRAS

Modern wide field radio surveys typically detect millions of objects. Techniques based on machine learning are proving to be useful for classifying large numbers of objects. The self-organizing map (SOM) is an unsupervised machine learning algorithm that projects a many-dimensional dataset onto a two- or three-dimensional lattice of neurons. This dimensionality reduction allows the user to visualize common features of the data better and develop algorithms for classifying objects that are not otherwise possible with large datasets. To this aim, we use the PINK implementation of a SOM. PINK incorporates rotation and flipping invariance so that the SOM algorithm may be applied to astronomical images. In this cookbook we provide instructions for working with PINK, including preprocessing the input images, training the model, and offering lessons learned through experimentation. The problem of imbalanced classes can be improved by careful selection of the training sample and increasing the number of neurons in the SOM (chosen by the user). Because PINK is not scale-invariant, structure can be smeared in the neurons. This can also be improved by increasing the number of neurons in the SOM. We also introduce pyink, a Python package used to read and write PINK binary files, assist in common preprocessing operations, perform standard analyses, visualize the SOM and preprocessed images, and create image-based annotations using a graphical interface. A tutorial is also provided to guide the user through the entire process. We present an application of PINK to VLA Sky Survey (VLASS) images. We demonstrate that the PINK is generally able to group VLASS sources with similar morphology together. We use the results of PINK to estimate the probability that a given source in the VLASS QuickLook Catalogue is actually due to sidelobe contamination., Comment: Accepted for publication in Astronomy and Computing

Intermediate-mass black holes (IMBH) are expected to exist in globular clusters (GCs) and compact stellar systems (CSS) in general, but none have been conclusively detected. Tidal disruption events (TDEs), where a star is tidally disrupted by the gravitational field of a black hole, have been observed to occur around the supermassive black holes (SMBH) found at the centres of galaxies, and should also arise around IMBHs, especially in the dense stellar cores of CSS's. However, to date none have been observed in such environments. Using data from the Zwicky Transient Facility (ZTF) we search for TDEs associated with CSS, but none are found. This non-detection allows us to set an upper limit on the TDE rate in CSS of $n_\text{TDE,Total}\lessapprox10^{-7} CSS^{-1}\text{yr}^{-1}$ which is two dex. below the observed TDE rate involving SMBH interacting with 1\Msun\ main sequence stars in the nuclei of massive galaxies. We also consider ultra compact dwarfs (UCDs) formed through a tidal stripping process in the surveyed volume. On the assumption these CSS contain SMBH and TDE rates are comparable to current observed optical rates in galactic nuclei ($\approx\num{3.2E-5}\text{gal}^{-1}\text{yr}^{-1}$), we determine an upper limit for the number of UCDs formed through a tidal stripping process in the surveyed volume to be $N_\text{GC, Strip}<\num{1.4E4}$, which we estimate represents $< 6\%$ of the population of GCs $>10^6\Msun$., Comment: 8 pages, 5 figures

Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky., Comment: 30 pages, 12 figures

Epilepsy is one of the most common neurological disorders, often requiring surgical intervention when medication fails to control seizures. For effective surgical outcomes, precise localisation of the epileptogenic focus - often approximated through the Seizure Onset Zone (SOZ) - is critical yet remains a challenge. Active probing through electrical stimulation is already standard clinical practice for identifying epileptogenic areas. Our study advances the application of deep learning for SOZ localisation using Single-Pulse Electrical Stimulation (SPES) responses, with two key contributions. Firstly, we implement an existing deep learning model to compare two SPES analysis paradigms: divergent and convergent. These paradigms evaluate outward and inward effective connections, respectively. We assess the generalisability of these models to unseen patients and electrode placements using held-out test sets. Our findings reveal a notable improvement in moving from a divergent (AUROC: 0.574) to a convergent approach (AUROC: 0.666), marking the first application of the latter in this context. Secondly, we demonstrate the efficacy of CNN Transformers with cross-channel attention in handling heterogeneous electrode placements, increasing the AUROC to 0.730. These findings represent a significant step in modelling patient-specific intracranial EEG electrode placements in SPES. Future work will explore integrating these models into clinical decision-making processes to bridge the gap between deep learning research and practical healthcare applications., Comment: 21 pages, 6 figures, accepted at Machine Learning for Healthcare 2024

We present source detection and catalogue construction pipelines to build the first catalogue of radio galaxies from the 270 $\rm deg^2$ pilot survey of the Evolutionary Map of the Universe (EMU-PS) conducted with the Australian Square Kilometre Array Pathfinder (ASKAP) telescope. The detection pipeline uses Gal-DINO computer-vision networks (Gupta et al., 2024) to predict the categories of radio morphology and bounding boxes for radio sources, as well as their potential infrared host positions. The Gal-DINO network is trained and evaluated on approximately 5,000 visually inspected radio galaxies and their infrared hosts, encompassing both compact and extended radio morphologies. We find that the Intersection over Union (IoU) for the predicted and ground truth bounding boxes is larger than 0.5 for 99% of the radio sources, and 98% of predicted host positions are within $3^{\prime \prime}$ of the ground truth infrared host in the evaluation set. The catalogue construction pipeline uses the predictions of the trained network on the radio and infrared image cutouts based on the catalogue of radio components identified using the Selavy source finder algorithm. Confidence scores of the predictions are then used to prioritize Selavy components with higher scores and incorporate them first into the catalogue. This results in identifications for a total of 211,625 radio sources, with 201,211 classified as compact and unresolved. The remaining 10,414 are categorized as extended radio morphologies, including 582 FR-I, 5,602 FR-II, 1,494 FR-x (uncertain whether FR-I or FR-II), 2,375 R (single-peak resolved) radio galaxies, and 361 with peculiar and other rare morphologies. We cross-match the radio sources in the catalogue with the infrared and optical catalogues, finding infrared cross-matches for 73% and photometric redshifts for 36% of the radio galaxies., Comment: Accepted for publication in PASA. The paper has 22 pages, 12 figures and 5 tables