Search

Synthetic periodontal membranes have appeared as a promising treatment modality for periodontal disease. They provide a suitable site for attachment and growth environment for periodontal cells and exhibit high biocompatibility and high water retaining capacity. However, existing membranes can develop biofilms and induce inflammation at the periodontal pocket and gingival cells, hence limiting their effectiveness. A Polycaprolactone/sodium alginate-based core-shell membrane with Magnesium doped Zinc oxide (PCL/SA/MgZnO) nanoparticles (NPs) was developed, with initial burst release followed by sustained release of the antibacterial agent. The membrane was synthesized using casting and dip coating methods and characterized using Scanning Electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The membranes were then evaluated for their antibacterial potential against Enterococcus faecalis, Streptococcus mutans, saliva microcosm, and diabetic saliva microcosm. Furthermore, they were analyzed for water-retaining capacity as well as mechanical properties and biocompatibility. The membranes were finally tested in a novel alloxan-induced diabetic periodontal rodent model based on the coinfection of E. faecalis and S. mutans. The results showed the enhanced antibacterial potential of PCL/SA/MgZnO membranes against E. faecalis, S. mutans, saliva microcosm, and diabetic saliva microcosm. The PCL/SA/MgZnO exhibited better mechanical strength as compared to PCL/SA and PCL/SA/ZnO membranes. The histological findings showed reduced inflammation in diabetic rats with periodontitis treated with PCL/SA/MgZnO. Furthermore, periodontal regeneration was also observed in the X-ray radiographs of rats treated with PCL/SA/MgZnO membranes. The PCL/SA-based core-shell membranes with MgZnO are effective candidates for the treatment of periodontal biofilms and inflammation in high-risk patients such as diabetic patients.

Typhoid fever, caused by Salmonella enterica serovar typhi, presents a substantial global health threat, particularly in regions with limited healthcare infrastructure. The rise of multidrug-resistant strains of S. typhi exacerbates this challenge, severely compromising conventional treatment efficacy due to over activity of efflux pumps. In our study, a comprehensive exploration of two fundamental aspects to combat MDR in S. typhi is carried out; i.e. employing advanced bioinformatics analyses and AlphaFold AI, We successfully identified and characterised a putative homologue, ABC-TPA, reminiscent of the P-glycoprotein (P-gp) known for its role in multidrug resistance in diverse pathogens. This discovery provides a critical foundation for understanding the potential mechanisms driving antibiotic resistance in S. typhi. Furthermore, employing computational methodologies, We meticulously assessed the potential of lignans, specifically Schisandrin A, B, and C, as promising Efflux Pump Inhibitors (EPIs) against the identified P-gp homologue in S. typhi. Noteworthy findings revealed robust binding interactions of Schisandrin A and B with the target protein, indicating substantial inhibitory capabilities. In contrast, Schisandrin C exhibited instability, showing varied effectiveness among the evaluated lignans. Pharmacokinetics and toxicity predictions underscored the favourable attributes of Schisandrin A, including prolonged action duration. Furthermore, high systemic stability and demanished toxicity profile of SA and SB present their therapeutic efficacy against MDR. This comprehensive investigation not only elucidates potential therapeutic strategies against MDR strains of S. typhi but also highlights the relevance of computational approaches in identifying and evaluating promising candidates. These findings lay a robust foundation for future empirical studies to address the formidable challenges antibiotic resistance poses in this clinically significant infectious diseases.

Bandages, gauzes, and alcoholic pads have been widely used for wound healing. However, bacterial infection in wounds is still a major problem and needs to be explored. Apart from antibacterial activity, the hydrophilicity of a membrane is also a major characteristic of membranes that should be explored. Upon contact with wound exudates, the hydrophilic membranes absorb water, swell, and liquefy to form a gel over the wound, which enhances autolytic debridement. Keeping this in view, this study aimed to synthesize and optimize a Polyvinyl Alcohol (PVA) and Gum Tragacanth (GT) membrane having different concentrations of gold nanoparticles (AuNPs) loaded with Ciprofloxacin (CIP) and their effect on the hydrophilicity of the membranes. CIP-AuNPs were prepared by the Turkevich method, and then for confirmation FTIR was performed. Membranes with different concentrations of CIP-AuNPs incorporated in PVA/GT and analyzed for their hydrophilicity. A membrane swelling ratio test as well as contact angle analysis were performed. Through this study, it was concluded that hydrophilic membrane of PVA/GT having a 5% concentration of CIP-AuNPs can be used as a wound healing material.

Wilson’s disease causes copper accumulation in the liver and extrahepatic organs. The available therapies aim to lower copper levels by various means. However, a potent drug that can repair the damaged liver and brain tissue is needed. Silymarin has hepatoprotective, antioxidant, and cytoprotective properties. However, poor oral bioavailability reduces its efficacy. In this study, a “thin film hydration method” was used for synthesizing silymarin-encapsulated liposome nanoparticles (SLNPs) and evaluated them against copper toxicity, associated liver dysfunction and neurobehavioral abnormalities in Wistar rats. After copper toxicity induction, serological and behavioral assays were conducted to evaluate treatment approaches. Histological examination of the diseased rats revealed severe hepatocyte necrosis and neuronal vacuolation. These cellular degenerations were mild in rats treated with SLNPs and a combination of zinc and SLNPs (ZSLNPs). SLNPs also decreased liver enzymes and enhanced rats’ spatial memory significantly (p = 0.006) in the diseased rats. During forced swim tests, SLNPs treated rats exhibited a 60-s reduction in the immobility period, indicating reduced depression. ZSLNPs were significantly more effective than traditional zinc therapy in decreasing the immobility period (p = 0.0008) and reducing liver enzymes, but not in improving spatial memory. Overall, SLNPs enhanced oral silymarin administration and managed copper toxicity symptoms.

Antibacterial restorative materials against caries-causing bacteria are highly preferred among high-risk patients, such as the elderly, and patients with metabolic diseases such as diabetes. This study aimed to enhance the antibacterial potential of resin composite with Magnesium-doped Zinc oxide (Mg-doped ZnO) nanoparticles (NPs) and to look for their effectiveness in the alloxan-induced diabetic model. Hexagonal Mg-doped ZnO NPs (22.3 nm diameter) were synthesized by co-precipitation method and characterized through ultraviolet-visible (UV-Vis), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analysis. The Mg-doped ZnO NPs (1, 2.5 and 5% w/w) were then evaluated for antibacterial activity using a closed system in vitro biofilm model. Significant enhancement in the antibacterial properties was observed in composites with 1% Mg-doped ZnO compared to composites with bare ZnO reinforced NPs (Streptococcus mutans, p = 0.0005; Enterococcus faecalis, p = 0.0074, Saliva microcosm, p < 0.0001; Diabetic Saliva microcosm, p < 0.0001). At 1–2.5% Mg-doped ZnO NPs concentration, compressive strength and biocompatibility of composites were not affected. The pH buffering effect was also achieved at these concentrations, hence not allowing optimal conditions for the anaerobic bacteria to grow. Furthermore, composites with Mg-doped ZnO prevented secondary caries formation in the secondary caries model of alloxan-induced diabetes. Therefore, Mg-doped ZnO NPs are highly recommended as an antibacterial agent for resin composites to avoid biofilm and subsequent secondary caries formation in high-risk patients.

Biofilm formation in the resin-composite interface is a major challenge for resin-based dental composites. Using doped z nanoparticles (NPs) to enhance the antibacterial properties of resin composites can be an effective approach to prevent this. The present study focused on the effectiveness of Selenium-doped ZnO (Se/ZnO) NPs as an antibacterial nanofiller in resin composites and their impact on their mechanical properties. Pristine and Se/ZnO NPs were synthesized by the mechanochemical method and confirmed through UV-Vis Spectroscopy, FTIR (Fourier Transform Infrared) analysis, X-ray Diffraction (XRD) crystallography, Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Zeta analysis. The resin composites were then modified by varying concentrations of pristine and Se/ZnO NPs. A single species (S. mutans and E. faecalis) and a saliva microcosm model were utilized for antibacterial analysis. Hemolytic assay and compressive strength tests were also performed to test the modified composite resin’s cytotoxicity and mechanical strength. When incorporated into composite resin, 1% Se/ZnO NPs showed higher antibacterial activity, biocompatibility, and higher mechanical strength when compared to composites with 1% ZnO NPs. The Se/ZnO NPs has been explored for the first time as an efficient antibacterial nanofiller for resin composites and showed effectiveness at lower concentrations, and hence can be an effective candidate in preventing secondary caries by limiting biofilm formation.

Resin composites have been widely used in dental restoration. However, polymerization shrinkage and resultant bacterial microleakage are major limitations that may lead to secondary caries. To overcome this, a new type of antibacterial resin composite containing ciprofloxacin-loaded silver nanoparticles (CIP-AgNPs) were synthesized. The chemical reduction approach successfully produced CIP-AgNPs, as demonstrated by FTIR, zeta potential, scanning electron microscopy, and ultraviolet-visible (UV-vis) spectroscopy. CIP-AgNPs were added to resin composites and the antibacterial activity of the dental composite discs were realized against Enterococcus faecalis, Streptococcus mutans, and the Saliva microcosm. The biocompatibility of modified resin composites was assessed and mechanical testing of modified dental composites was also performed. The results indicated that the antibacterial activity and compressive strength of resin composites containing CIP-AgNPs were enhanced compared to the control group. They were also biocompatible when compared to resin composites containing AgNPs. In short, these results established strong ground application for CIP-AgNP-modified dental composite resins.

Micro-crack formation and resultant bacterial infiltration are major causes of secondary caries formation in dental resin-based composite restorations. Improving dental resin composites’ mechanical and biological properties using highly bendable nanoparticles (NPs) can resolve this issue. This study aims to develop novel Diethylaminoethyl (DEAE)-Dextran silver nanoparticles (AgNPs) and subsequently modify composite resins with these NPs to enhance their mechanical and antibacterial properties. DEAE-Dextran AgNPs were successfully synthesized using a chemical reduction method that was confirmed with the help of ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Zeta potential, and energy-dispersive X-ray spectroscopy (EDS). Antibacterial activity of a composite disc with DEAE-Dextran AgNPs was tested against Streptococcus mutans, Enterococcus faecalis, and oral microcosm. The composite discs prepared with DEAE-Dextran AgNPs exhibited excellent antibacterial activity compared with composite resin reinforced by simple AgNPs (p < 0.05). Mechanical properties were significantly enhanced by adding DEAE-Dextran into composite resin (p < 0.05). Moreover, unlike AgNPs, DEAE-Dextran AgNPs were found to be less hemolytic. The results establish strong ground applications for DEAE-Dextran-modified dental composite resins in restorative dental applications.

Membrane fouling is a continued critical challenge for ultrafiltration membranes performance. In this work, polyether sulfone (PES) ultrafiltration (UF) membranes were fabricated via phase-inversion method by incorporating varying concentrations of APTMS modified activated carbon (mAC). The mAC was thoroughly characterized and the fabricated membranes were studied for their surface morphology, functional groups, contact angle, water retention, swelling (%) porosity, and water flux. The hydrophilicity of mAC membranes also resulted in lower contact angle and higher values of porosity, roughness, water retention as well as water flux. Also, the membranes incorporated with mAC exhibited antibacterial performance against model test strains of gram-negative Ecoil and gram-positive S. aureus. The antifouling studies based on bovine serum albumin protein (BSA) solution filtration showed that mAC membranes have better BSA flux. The higher flux and antifouling characteristics of the mAC membranes were attributed to the electrostatic repulsion of the BSA protein from the unique functional properties of AC and network structure of APTMS. The novel mAC ultrafiltration membranes developed and studied in present work can provide higher flux and less BSA rejection thus can find antifouling applications for the isolation and concentration of proteins and macromolecules.

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.

Metallic nanoparticles, such as gold nanoparticles (AuNPs), have been extensively studied as drug delivery systems for various therapeutic applications. However, drug-loaded-AuNPs have been rarely explored in vivo for their effect on bacteria residing inside tissues. Ciprofloxacin (CIP) is a second-generation fluoroquinolone with a broad-spectrum of antibiotic properties devoid of developing bacteria resistance. This research is focused on the synthesis and physical characterization of Ciprofloxacin-loaded gold nanoparticles (CIP-AuNPs) and their effect on the colonization of Enterococcus faecalis in the liver and kidneys of mice. The successfully prepared CIP-AuNPs were stable and exerted enhanced in vitro antibacterial activity against E. faecalis compared with free CIP. The optimized CIP-AuNPs were administered (500 µg/Kg) once a day via tail vein to infected mice for eight days and were found to be effective in eradicating E. faecalis from the host tissues. Moreover, unlike CIP, CIP-AuNPs were non-hemolytic. In summary, this study demonstrated that CIP-AuNPs are promising and biocompatible alternative therapeutics for E.-faecalis-induced infections resistant to conventional drugs (e.g., beta-lactams and vancomycin) and should be further investigated.

Metal nanoparticles (NPs) have received much attention for potential applications in medicine (mainly in oncology, radiology and infectiology), due to their intriguing chemical, electronical, catalytical, and optical properties such as surface plasmon resonance (SPR) effect. They also offer ease in controlled synthesis and surface modification (e.g., tailored properties conferred by capping/protecting agents including N-, P-, COOH-, SH-containing molecules and polymers such as thiol, disulfide, ammonium, amine, and multidentate carboxylate), which allows (i) tuning their size and shape (e.g., star-shaped and/or branched) (ii) improving their stability, monodispersity, chemical miscibility, and activity, (iii) avoiding their aggregation and oxidation over time, (iv) increasing their yield and purity. The bottom-up approach, where the metal ions are reduced in the NPs grown in the presence of capping ligands, has been widely used compared to the top-down approach. Besides the physical and chemical synthesis methods, the biological method is gaining much consideration. Indeed, several drawbacks have been reported for the synthesis of NPs via physical (e.g., irradiation, ultrasonication) and chemical (e.g., electrochemisty, reduction by chemicals such as trisodium citrate or ascorbic acid) methods (e.g., cost, and/ortoxicity due to use of hazardous solvents, low production rate, use of huge amount of energy). However, (organic or inorganic) eco-friendly NPs synthesis exhibits a sustainable, safe, and economical solution. Thereby, a relatively new trend for fast and valuable NPs synthesis from (live or dead) algae (i.e., microalgae, macroalgae and cyanobacteria) has been observed, especially because of its massive presence on the Earth’s crust and their unique properties (e.g., capacity to accumulate and reduce metallic ions, fast propagation). This article discusses the algal-mediated synthesis methods (either intracellularly or extracellularly) of inorganic NPs with special emphasis on the noblest metals, i.e., silver (Ag)- and gold (Au)-derived NPs. The key factors (e.g., pH, temperature, reaction time) that affect their biosynthesis process, stability, size, and shape are highlighted. Eventually, underlying molecular mechanisms, nanotoxicity and examples of major biomedical applications of these algal-derived NPs are presented.

Multidrug resistance (MDR) has been a potentiator for the exploration of antibiotics. Nano drug delivery systems have opened new avenues to overcome this challenge. Although antibacterial nanocarriers are extensively realized, their effect on the bacteria residing inside the tissues and their toxicity is rarely explored. This study investigated the effects of flavonoid coated gold nanoparticles (FAuNPs) on the colonization of Enterococcus faecalis in the mouse liver and kidneys. Flavonoids were extracted from the leaves of Berberis lycium Royle and used to stabilize gold following a green synthesis approach. FAuNPs were characterized by ultraviolet-visible (UV-Vis) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), X-ray powder diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). FAuNPs showed significantly higher reduction in bacterial counts in in-vitro and in-vivo in mice organs as compared to the free flavonoids owing to their biocompatibility and effectiveness.

Pseudomonas aeruginosa is a Gram-negative pathogenic bacterium that is present commonly in soil and water and is responsible for causing septic shock, pneumonia, urinary tract and gastrointestinal infections, etc. The multi-drug resistance (MDR) phenomenon has increased dramatically in past years and is now considered a major threat globally, so there is an urgent need to develop new strategies to overcome drug resistance by P. aeruginosa. In P. aeruginosa, a major factor of drug resistance is associated to the formation of biofilms by the LasR enzyme, which regulates quorum sensing and has been reported as a new therapeutic target for designing novel antibacterial molecules. In this study, virtual screening and molecular docking were performed against the ligand binding domain (LBD) of LasR by employing a pharmacophore hypothesis for the screening of 2373 FDA-approved compounds to filter top-scoring hit compounds. Six inhibitors out of 2373 compounds were found to have binding affinities close to that of known LasR inhibitors. The binding modes of these compounds to the binding site in LasR-LBD were analyzed to identify the key interactions that contribute to the inhibition of LasR activity. Then, 50 ns simulations of top hit compounds were performed to elucidate the stability of their binding conformations with the LasR-LBD. This study, thus concluded that sulfamerazine showed the highest binding affinity for the LasR-LBD binding pocket exhibiting strong inhibitory binding interactions during molecular dynamics (MD) simulation.

Plant phytochemicals have potential decontaminating properties, however, their role in the amelioration of hydrophobic water filtration membranes have not been elucidated yet. In this work, phytochemicals (i.e., cannabinoids (C) and terpenes (T) from C. sativa) were revealed for their antibacterial activity against different Gram-positive and Gram-negative bacteria. As such, a synergistic relationship was observed between the two against all strains. These phytochemicals individually and in combination were used to prepare polyethersulfone (PES) hybrid membranes. Membrane characterizations were carried out using scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy. Moreover, contact angle, water retention, surface roughness, mechanical testing, and X-ray florescence analysis were also carried out. According to results, the CT-PES hybrid membrane exhibited the lowest contact angle (40°), the highest water retention (70%), and smallest average pore size (0.04 µm). The hybrid membrane also exhibited improved water flux with no surface leaching. Quantitative bacterial decline analysis of the CT-PES hybrid membranes confirmed an effective antibacterial performance against Gram-positive and Gram-negative bacteria. The results of this study established cannabinoids and terpenes as an inexpensive solution for PES membrane surface modification. These hybrid membranes can be easily deployed at an industrial scale for water filtration purposes.