Search

Failure detection of Unmanned Aerial Vehicle (UAV) motors and propulsion systems is the most important step in the implementation of active fault-tolerant control systems. This will increase the reliability of unmanned systems and increase the level of safety, especially in civil and commercial applications. The following paper presents a method of motor failure detection in the multirotor UAV using piezo bars. The results of a real flight, in which the failure of the propulsion system caused the crash of a hybrid VTOL UAV, were presented and analyzed. The conclusions drawn from this flight led to the development of a lightweight, simple and reliable sensor that can detect a failure of the UAV propulsion system. The article presents the outcomes of laboratory tests concerning measurements made with a piezo sensor. An extensive analysis of the obtained results of vibrations recorded on a flying platform arm with a propulsion system is presented, and a methodology for using this type of data to detect failures is proposed. The article presents the possibility of using a piezoelectric sensor to record vibrations on the basis of which it is possible to detect a failure of the UAV propulsion system. [ABSTRACT FROM AUTHOR]

This paper presents the process optimization of some key parameters, such as beam spacing, flux density and optimal impedance load matching of magnetic coupled piezoelectric harvesters. In order to do this, the distributed parameters model of this structure, containing macro-fiber components (MFC) with homogenous material in the piezoelectric fiber layer, was determined. Next, the computational model of this structure was designed on the basis of the first-order shear theory (FOST). The performed analysis of the calculated voltage outputs on the basis of the theoretical approach and finite element model by various beam spacing allowed us to indicate that optimized parameters play an important role in enhancing the efficiency of the system. Experiments carried out in a laboratory stand for this structure, allowed for the verification of the numerical results. In the effect, it can be noted that magnetic coupled harvesters will be relevant for a wide range of application sectors, as well as useful for the evolving composite industry. [ABSTRACT FROM AUTHOR]

This paper is focused on the diagnostics of multicopter UAV propulsion system, in which the temporary transient states occur during operation in faulty conditions (eg. not all motor phases working properly). As a diagnostic sensor, the piezo strip has been used, which is very sensitive to any vibrations of the multi-rotor frame. The paper concerns the precise location of the sensor for more effective monitoring of the propulsion system state. For this purpose, a nonlinear analysis of the vibration times series was carefully presented. The obtained non-linear time series were studied with the recurrence analysis in short time windows, which were sensitive to changes in Unmanned Aerial Vehicle motor speeds. The tests were carried out with different percentage of the pulse width modulation signal used for the operation of the brushless motor and for different locations of the piezosensor (side and top planes of the multicopter arm). In the article, it was shown that the side location of the piezosensor is more sensitive to changes in the Unmanned Aerial Vehicle propulsion system, which was studied with the Principal Component Analysis method applied for four main recurrence quantifications. The research presented proves the possibility of using nonlinear recurrence analysis for propulsion system diagnostics and helps to determine the optimal sensor location for more effective health monitoring of multicopter motor. [ABSTRACT FROM AUTHOR]

Autonomous take-off and landing on a moving landing pad are extraordinarily complex and challenging functionalities of modern UAVs, especially if they must be performed in windy environments. The article presents research focused on achieving such functionalities for two kinds of UAVs, i.e., a tethered multicopter and VTOL. Both vehicles are supported by a landing pad navigation station, which communicates with their ROS-based onboard computer. The computer integrates navigational data from the UAV and the landing pad navigational station through the utilization of an extended Kalman filter, which is a typical approach in such applications. The novelty of the presented system is extending navigational data with data from the ultra wide band (UWB) system, and this makes it possible to achieve a landing accuracy of about 1 m. In the research, landing tests were carried out in real conditions on a lake for both UAVs. In the tests, a special mobile landing pad was built and based on a barge. The results show that the expected accuracy of 1 m is indeed achieved, and both UAVs are ready to be tested in real conditions on a ferry. [ABSTRACT FROM AUTHOR]