Search

This paper reports results from an experiment exposing the hot isostatic pressed tantalum cladding of a tungsten spallation target sample to a 34 m/s water jet. The unpolished tantalum surface was placed under the jet for 4.5 months with a view to quantifying pitting and erosion. Micrographs and laser profilometry records of the sample surface taken before and after the experiment are reported here.

Beryllium is a material extensively used in various particle accelerator beam lines and target facilities, as beam windows and, to a lesser extent, as secondary particle production targets. With increasing beam intensities of future multimegawatt accelerator facilities, these components will have to withstand even greater thermal and mechanical loads during operation. As a result, it is critical to understand the beam-induced thermal shock limit of beryllium to help reliably operate these components without having to compromise particle production efficiency by limiting beam parameters. As part of the RaDIATE (radiation damage in accelerator target environments) Collaboration, an exploratory experiment to probe and investigate the thermomechanical response of several candidate beryllium grades was carried out at CERN’s HiRadMat facility, a user facility capable of delivering very-high-intensity proton beams to test accelerator components. Multiple arrays of thin beryllium disks of varying thicknesses and grades, as well as thicker cylinders, were exposed to increasing beam intensities to help identify any thermal shock failure threshold. Real-time experimental measurements and postirradiation examination studies provided data to compare the response of the various beryllium grades, as well as benchmark a recently developed beryllium Johnson-Cook strength model.

Fluidized tungsten powder has been proposed as a potential target technology for particle accelerator applications with very high power highly focused pulsed beams. This has motivated a series of experiments carried out at the HiRadMat facility at CERN to study the response of a tungsten powder sample to an impinging high energy proton beam pulse. The main observation was that of beam induced lifting of the powder sample which was recorded by high speed video. In this paper we consider three mechanisms to explain the observed powder lift including aerodynamic, thermal expansion and induced charge effects. Simulations of the aerodynamic effect revealed that this could not explain the magnitude of the observed eruptions especially during tests carried out with the powder in a vacuum. Thermal expansion of tungsten particles giving rise to the eruption seems implausible due to the propensity for the powder to absorb perturbations. We show that the observations can be explained by a Coulombic eruption of the tungsten particles. The high energy beam leaves a pattern of charge distributed in the poorly conducting powder sample, which creates an electric field that consequently results in a force acting on the individual charged particles. We calculate the charge deposited, the electric field and the resulting acceleration and show that this is a plausible mechanism for causing the observed eruptions. We believe the response of a granular conductive sample to an incident proton beam has not previously been explained.

This paper reports the results from single-pulse experiments of a $440\text{ }\text{ }\mathrm{GeV}/c$ proton beam interacting with granular tungsten samples in both vacuum and helium environments. Remote high-speed photography and laser Doppler vibrometry were used to observe the effect of the beam on the sample grains. The majority of the results were derived from a trough containing $\ensuremath{\sim}45\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$ diameter spheres (not compacted) reset between experiments to maintain the same initial conditions. Experiments were also carried out on other open and contained samples for the purposes of comparison both with the $45\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$ grain results and with a previous experiment carried out with sub-$250\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$ mixed crystalline tungsten powder in helium [Phys. Rev. ST Accel. Beams 17, 101005 (2014)]. The experiments demonstrate that a greater dynamic response is produced in a vacuum than in a helium environment and in smaller grains compared with larger grains. The examination of the dynamics of the grains after a beam impact leads to the hypothesis that the grain response is primarily the result of a charge interaction of the proton beam with the granular medium.

Design of a target able to withstand a high intensity beam such as those planned for a Neutrino Factory and Muon Collider requires integration of particle yield optimisation with engineering feasibility studies. This article reports a basic thermo-mechanical analysis of cylinders of common engineering materials irradiated by an 8 GeV proton beam (Neutrino Factory beam energy) of varying sigma. Beam induced peak temperature jump, a typical temperature distribution, peak energy density, peak quasi-static Von Mises stresses and material yield strengths are reported here as a reference guide for target design.

The experiment described in this paper is the first study of the response of a static tungsten powder sample to an impinging high energy proton beam pulse. The experiment was carried out at the HiRadMat facility at CERN. Observations include high speed videos of a proton beam induced perturbation of the powder sample as well as data from a laser Doppler vibrometer measuring the oscillations of the powder container. A comparison with a previous analogous experiment which studied a proton beam interaction with mercury is made. The experiment described in this paper is the first study of the response of a static tungsten powder sample to an impinging high energy proton beam pulse. The experiment was carried out at the HiRadMat facility at CERN. Observations include high speed videos of a proton beam induced perturbation of the powder sample as well as data from a laser Doppler vibrometer measuring the oscillations of the powder container. A comparison with a previous analogous experiment which studied a proton beam interaction with mercury is made

Beam dumps are essential components of any accelerator system. They are usually located at the end of the beam delivery systems and are designed to safely absorb and dissipate the particle energy. In the second stage of the proposed International Linear Collider (ILC), the electron and positron beams are accelerated to 500 GeV each (1 TeV total). Each bunch will have 2×10 10 electrons/positrons, and 2820 bunches form one beam bunch train with time duration of 0.95 ms and 4 Hz frequency. The average beam power will be 18 MW with a peak power of 4.5 GW. The FLUKA code was used to determine the power deposited by the beam at all critical locations. This data forms the input into the thermal hydraulic analysis CFD code for detailed flow and thermal evaluation. Both 2D and 3D flow analyses were carried out at all the critical regions to arrive at optimum geometry and flow parameters of the beam dump. The generation and propagation of pressure waves due to rapid deposition of heat has also been analyzed. © 2012 Elsevier B.V. All rights reserved.

A tungsten powder jet is a potential candidate technology for a particle production target in a future high power (i.e. Multi-MW) particle accelerator based facility, such as a so-called conventional neutrino Super Beam, a proposed Neutrino Factory, or a future neutron source. To test the viability of producing a suitable powder jet a few simple experiments were performed using standard pneumatic conveying equipment and the encouraging results are presented.

The Long Baseline Neutrino Facility (LBNF, formerly the Long Baseline Neutrino Experiment) is under design as a next generation neutrino oscillation experiment, with primary objectives to search for CP violation in the leptonic sector, to determine the neutrino mass hierarchy and to provide a precise measurement of θ_{23}. The facility will generate a neutrino beam at Fermilab by the interaction of a proton beam with a target material. At the ultimate anticipated proton beam power of 2.3 MW the target material must dissipate a heat load of between 10 and 25 kW depending on the target size. This paper presents a target concept based on an array of spheres and compares it to a cylindrical monolithic target such as that which currently operates at the T2K facility. Simulation results show that the proposed technology offers efficient cooling and lower stresses whilst delivering a neutrino production comparable with that of a conventional solid cylindrical target.

The next generation neutrino observatory proposed by the LBNO collaboration will address fundamental questions in particle and astroparticle physics. The experiment consists of a far detector, in its first stage a 20 kt LAr double phase TPC and a magnetised iron calorimeter, situated at 2300 km from CERN and a near detector based on a high-pressure argon gas TPC. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $\delta_{CP}$ and matter. In this paper we have reevaluated the physics potential of this setup for determining the mass hierarchy (MH) and discovering CP-violation (CPV), using a conventional neutrino beam from the CERN SPS with a power of 750 kW. We use conservative assumptions on the knowledge of oscillation parameter priors and systematic uncertainties. The impact of each systematic error and the precision of oscillation prior is shown. We demonstrate that the first stage of LBNO can determine unambiguously the MH to $>5\sigma$C.L. over the whole phase space. We show that the statistical treatment of the experiment is of very high importance, resulting in the conclusion that LBNO has $\sim$ 100% probability to determine the MH in at most 4-5 years of running. Since the knowledge of MH is indispensable to extract $\delta_{CP}$ from the data, the first LBNO phase can convincingly give evidence for CPV on the $3\sigma$C.L. using today's knowledge on oscillation parameters and realistic assumptions on the systematic uncertainties., Comment: 35 pages, 22 figures, added authors

We present a new design study of the neutrino Super Beam based on the Superconducting Proton Linac at CERN. This beam is aimed at megaton mass physics, a large water Cherenkov detector, proposed for the Laboratoire Souterrain de Modane in France, with a baseline of 130 km. The aim of this proposed facility is to study $CP$ violation in the neutrino sector. In the study reported here, we have developed the conceptual design of the neutrino beam, especially the target and the magnetic focusing device. Indeed, this beam presents several unprecedented challenges, related to the high primary proton beam power (4 MW), the high repetition rate (50 Hz), and the low kinetic energy of the protons (4.5 GeV). The design is completed by a study of all the main components of the system, starting from the transport system to guide the beam to the target up to the beam dump. This is the first complete study of a neutrino beam based on a pebble-bed target capable of standing the large heat deposition of MW class proton beams.

Very intense neutrino beams and large neutrino detectors will be needed in order to enable the discovery of CP violation in the leptonic sector. We propose to use the proton linac of the European Spallation Source currently under construction in Lund, Sweden to deliver, in parallel with the spallation neutron production, a very intense, cost effective and high performance neutrino beam. The baseline program for the European Spallation Source linac is that it will be fully operational at 5 MW average power by 2022, producing 2 GeV 2.86 ms long proton pulses at a rate of 14 Hz. Our proposal is to upgrade the linac to 10 MW average power and 28 Hz, producing 14 pulses/s for neutron production and 14 pulses/s for neutrino production. Furthermore, because of the high current required in the pulsed neutrino horn, the length of the pulses used for neutrino production needs to be compressed to a few $\mu$s with the aid of an accumulator ring. A long baseline experiment using this Super Beam and a megaton underground Water Cherenkov detector located in existing mines 300-600 km from Lund will make it possible to discover leptonic CP violation at 5 $\sigma$ significance level in up to 50% of the leptonic Dirac CP-violating phase range. This experiment could also determine the neutrino mass hierarchy at a significance level of more than 3 $\sigma$ if this issue will not already have been settled by other experiments by then. The mass hierarchy performance could be increased by combining the neutrino beam results with those obtained from atmospheric neutrinos detected by the same large volume detector. This detector will also be used to measure the proton lifetime, detect cosmological neutrinos and neutrinos from supernova explosions. Results on the sensitivity to leptonic CP violation and the neutrino mass hierarchy are presented. Very intense neutrino beams and large neutrino detectors will be needed in order to enable the discovery of CP violation in the leptonic sector. We propose to use the proton linac of the European Spallation Source currently under construction in Lund, Sweden, to deliver, in parallel with the spallation neutron production, a very intense, cost effective and high performance neutrino beam. The baseline program for the European Spallation Source linac is that it will be fully operational at 5 MW average power by 2022, producing 2 GeV 2.86 ms long proton pulses at a rate of 14 Hz. Our proposal is to upgrade the linac to 10 MW average power and 28 Hz, producing 14 pulses/s for neutron production and 14 pulses/s for neutrino production. Furthermore, because of the high current required in the pulsed neutrino horn, the length of the pulses used for neutrino production needs to be compressed to a few μs with the aid of an accumulator ring. A long baseline experiment using this Super Beam and a megaton underground Water Cherenkov detector located in existing mines 300–600 km from Lund will make it possible to discover leptonic CP violation at 5 σ significance level in up to 50% of the leptonic Dirac CP-violating phase range. This experiment could also determine the neutrino mass hierarchy at a significance level of more than 3 σ if this issue will not already have been settled by other experiments by then. The mass hierarchy performance could be increased by combining the neutrino beam results with those obtained from atmospheric neutrinos detected by the same large volume detector. This detector will also be used to measure the proton lifetime, detect cosmological neutrinos and neutrinos from supernova explosions. Results on the sensitivity to leptonic CP violation and the neutrino mass hierarchy are presented. Very intense neutrino beams and large neutrino detectors will be needed in order to enable the discovery of CP violation in the leptonic sector. We propose to use the proton linac of the European Spallation Source currently under construction in Lund, Sweden to deliver, in parallel with the spallation neutron production, a very intense, cost effective and high performance neutrino beam. The baseline program for the European Spallation Source linac is that it will be fully operational at 5 MW average power by 2022, producing 2 GeV 2.86 ms long proton pulses at a rate of 14 Hz. Our proposal is to upgrade the linac to 10 MW average power and 28 Hz, producing 14 pulses/s for neutron production and 14 pulses/s for neutrino production. Furthermore, because of the high current required in the pulsed neutrino horn, the length of the pulses used for neutrino production needs to be compressed to a few $\mu$s with the aid of an accumulator ring. A long baseline experiment using this Super Beam and a megaton underground Water Cherenkov detector located in existing mines 300-600 km from Lund will make it possible to discover leptonic CP violation at 5 $\sigma$ significance level in up to 50% of the leptonic Dirac CP-violating phase range. This experiment could also determine the neutrino mass hierarchy at a significance level of more than 3 $\sigma$ if this issue will not already have been settled by other experiments by then. The mass hierarchy performance could be increased by combining the neutrino beam results with those obtained from atmospheric neutrinos detected by the same large volume detector. This detector will also be used to measure the proton lifetime, detect cosmological neutrinos and neutrinos from supernova explosions. Results on the sensitivity to leptonic CP violation and the neutrino mass hierarchy are presented.

An epidemiological study was carried out on a sample of 531 children aged between 7 and 10 in Val Pellice (TO). Analysis of their DMFT showed-data that were no different to those reported in similar studies carried out in Northern Italy.

An analysis of the results of an epidemiological study on 531 children aged between 7 and 10 and resident in the mountain district of Val Pellice is presented. Special reference is made to the bacterial plaque and tartar.

A new method for computerized epidemiological data is proposed. Personal experience in a study of 531 children of school age from the Val Pellice is reported.

The data collected in a sample of 531 pupils of the primary schools of Val Pellice aged between 7 and 10 have been examined. These data suggest with sufficient reliability that periodontal disease is a threat even in this age segment.

The next generation neutrino observatory proposed by the LBNO collaboration will address fundamental questions in particle and astroparticle physics. The experiment consists of a far detector, in its first stage a 20 kt LAr double phase TPC and a magnetised iron calorimeter, situated at 2300 km from CERN and a near detector based on a high-pressure argon gas TPC. The long baseline provides a unique opportunity to study neutrino flavour oscillations over their 1st and 2nd oscillation maxima exploring the $L/E$ behaviour, and distinguishing effects arising from $\delta_{CP}$ and matter. In this paper we have reevaluated the physics potential of this setup for determining the mass hierarchy (MH) and discovering CP-violation (CPV), using a conventional neutrino beam from the CERN SPS with a power of 750 kW. We use conservative assumptions on the knowledge of oscillation parameter priors and systematic uncertainties. The impact of each systematic error and the precision of oscillation prior is shown. We demonstrate that the first stage of LBNO can determine unambiguously the MH to $>5\sigma$C.L. over the whole phase space. We show that the statistical treatment of the experiment is of very high importance, resulting in the conclusion that LBNO has $\sim$ 100% probability to determine the MH in at most 4-5 years of running. Since the knowledge of MH is indispensable to extract $\delta_{CP}$ from the data, the first LBNO phase can convincingly give evidence for CPV on the $3\sigma$C.L. using today's knowledge on oscillation parameters and realistic assumptions on the systematic uncertainties.