Search

This paper proposes new practical design tools for the robust motion control systems based on disturbance observer (DOB). Although DOB has long been used in several motion control applications, it has insufficient analysis and design tools. The paper proposes a new practical robustness constraint, which improve the robustness at high frequencies, on the bandwidth of a DOB and nominal inertia. Although increasing the bandwidth of a DOB and nominal inertia improves the performance and stability, they are limited by the robustness constraint. Besides, a novel stability analysis method is proposed for reaction force observer (RFOB) based robust force control systems. It is shown that not only the performance, but also the stability changes significantly by the imperfect identification of inertia and torque coefficient. The robustness and stability of a DOB based motion control system are improved by proposing new design tools. The validity of the proposals are verified by experimental results., Comment: 6 pages conference paper

This paper analyses the robust stability and performance of the Disturbance Observer- (DOb-) based digital motion control systems in discrete-time domain. It is shown that the phase margin and the robustness of the digital motion controller can be directly adjusted by tuning the nominal plant model and the bandwidth of the observer. However, they have upper and lower bounds due to robust stability and performance constraints as well as noise-sensitivity. The constraints on the design parameters of the DOb change when the digital motion controller is synthesised by measuring different states of a servo system. For example, the bandwidth of the DOb is limited by noise-sensitivity and waterbed effect when velocity and position measurements are employed in the digital robust motion controller synthesis. The robustness constraint due to the waterbed effect is removed when the DOb is implemented by acceleration measurement. The design constraints on the nominal plant model and the bandwidth of the observer are analytically derived by employing the generalised Bode Integral Theorem in discrete-time. The proposed design constraints allow one to systematically synthesise a high-performance DOb-based digital robust motion controller. Experimental results are given to verify the proposed analysis and synthesis methods., Comment: 11 pages, 17 figures

The goal of this paper is to clarify the robustness and performance constraints in the design of control systems based on disturbance observer (DOB). Although the bandwidth constraints of a DOB have long been very well-known by experiences and observations, they have not been formulated and clearly reported yet. In this regard, the Bode and Poisson integral formulas are utilized in the robustness analysis so that the bandwidth constraints of a DOB are derived analytically. In this paper, it is shown that the bandwidth of a DOB has upper and lower bounds to obtain good robustness if the plant has non-minimum phase zero(s) and pole(s), respectively. Besides that the performance of a system can be improved by using a higher-order disturbance observer (HODOB); however, the robustness may deteriorate, and the bandwidth constraints become more severe. New analysis and design methods, which provide good robustness and predefined performance criteria, are proposed for the DOB based robust control systems. The validity of the proposals are verified by simulation results.

In this paper, a new adaptive design method is proposed for reaction force observer (RFOB) based robust force control systems. It is a well-known fact that an RFOB has several superiorities over a force sensor such as higher force control bandwidth, stability improvement, force-sensorless force control, and so on. However, there are insufficient analysis and design methods for an RFOB based robust force control system; therefore, its stability and performance highly depend on designers own experiences. To overcome this issue, new stability analysis and novel adaptive design methods are proposed for RFOB based robust force control systems. In the proposed adaptive design method, the design parameters of the robust force control system, i.e., the bandwidths of a disturbance observer (DOB) and an RFOB, the nominal and identified inertias in the design of a DOB and an RFOB, respectively, and the force control gain, are adjusted automatically by using an adaptive control algorithm which is derived by estimating the plant parameters and environmental impedance. The proposed adaptive design method provides good stability and performance by considering the design constraints of a DOB. The validity of the proposals is verified by simulation and experimental results.

This paper analyzes the robustness and stability of a disturbance observer (DOB) and a reaction torque observer (RTOB) based robust motion control systems. Conventionally, a DOB is analyzed by using an ideal velocity measurement that is obtained without using a low-pass-filter (LPF); however, it is impractical due to noise constraints. An LPF of velocity measurement changes the robustness of a DOB significantly and puts a new design constraint on the bandwidth of a DOB. An RTOB, which is used to estimate environmental impedance, is an application of a DOB. The stability of an RTOB based robust force control system has not been reported yet since its oversimplified model is derived by assuming that an RTOB has a feed-forward control structure. However, in reality, it has a feed-back control structure; therefore, not only the performance but also the stability is affected by the design parameters of a RTOB. A new practical stability analysis method is proposed for a RTOB based robust force control system. Besides that novel and practical design methods, which improve the robustness of a DOB and the stability and performance of an RTOB based robust force control system, are proposed by using the new analysis methods. The validity of the proposals is verified by simulation and experimental results.

Disturbance Observer has been one of the most widely used robust control tools since it was proposed in 1983. This paper introduces the origins of Disturbance Observer and presents a survey of the major results on Disturbance Observer-based robust control in the last thirty-five years. Furthermore, it explains the analysis and synthesis techniques of Disturbance Observer-based robust control for linear and nonlinear systems by using a unified framework. In the last section, this paper presents concluding remarks on Disturbance Observer-based robust control and its engineering applications., Comment: 12 pages, 4 figures

This paper proposes a new nonlinear stability analysis for the acceleration-based robust position control of robot manipulators by using Disturbance Observer (DOb). It is shown that if the nominal inertia matrix is properly tuned in the design of DOb, then the position error asymptotically goes to zero in regulation control and is uniformly ultimately bounded in trajectory tracking control. As the bandwidth of DOb and the nominal inertia matrix are increased, the bound of error shrinks, i.e., the robust stability and performance of the position control system are improved. However, neither the bandwidth of DOb nor the nominal inertia matrix can be freely increased due to practical design constraints, e.g., the robust position controller becomes more noise sensitive when they are increased. The proposed stability analysis provides insights regarding the dynamic behavior of DOb-based robust motion control systems. It is theoretically and experimentally proved that non-diagonal elements of the nominal inertia matrix are useful to improve the stability and adjust the trade-off between the robustness and noise sensitivity. The validity of the proposal is verified by simulation and experimental results., Comment: 9 pages, 9 figures, Journal