Search

The superconducting diode effect (SDE), where zero-resistance states appear nonreciprocally during current injection, is receiving tremendous interest in both fundamental and applied physics because the SDE is a novel manifestation of symmetry breaking and enables the creation of a novel diode without energy loss. In particular, magnetic-field-free SDEs have been extensively investigated because of their potential to serve as building blocks for superconducting circuit technology. In this letter, we report the field-free SDE in a layered superconductor, FeSe. Its underlying physics is clarified by systematic controlled experiments to be an interplay of a large thermoelectric response and geometrical asymmetry in FeSe. Our findings can pave a new avenue for the construction of novel material and device platforms utilizing SDEs., Comment: 16 pages, 5 figures

Spin-orbit torque (SOT) is receiving tremendous attention from both fundamental and application-oriented aspects. Co2MnGa, a Weyl ferromagnet that is in a class of topological quantum materials, possesses cubic-based high structural symmetry, the L21 crystal ordering, which should be incapable of hosting anisotropic SOT in conventional understanding. Here we show the discovery of a gigantic anisotropy of self-induced SOT in Co2MnGa. The magnitude of the SOT is comparable to that of heavy metal/ferromagnet bilayer systems despite the high inversion symmetry of the Co2MnGa structure. More surprisingly, a sign inversion of the self-induced SOT is observed for different crystal axes. This finding stems from the interplay of the topological nature of the electronic states and their strong modulation by external strain. Our research enriches the understanding of the physics of self-induced SOT and demonstrates a versatile method for tuning SOT efficiencies in a wide range of materials for topological and spintronic devices., Comment: 15pages, 4figures (To appear Nano Lett.)

Hanle magnetoresistance (HMR) is a type of magnetoresistance where interplay of the spin Hall effect, Hanle-type spin precession, and spin-dependent scattering at the top/bottom surfaces in a heavy metal controls the effect. In this study, we modulate HMR in ultrathin Pt by ionic gating, where the surface Rashba field created by a strong electric field at the interface between the ionic gate and Pt plays the dominant role in the modulation. This finding can facilitate investigations of gate-tunable, spin-related effects and fabrication of spin devices., Comment: 10 pages, 3 figures (To appear in Applied Physics Express)

Self-induced spin-orbit torques (SI-SOTs) in ferromagnetic (FM) layers have been overlooked when estimating the spin Hall angle (SHA) of adjacent nonmagnetic (NM) layers. In this work, we observe anomalous sign inversion of the total SOT in the spin-torque ferromagnetic resonance due to the enhanced SI-SOT, and successfully rationalize the sign inversion through a theoretical calculation considering the SHE in both the NM and FM layers. The findings show that using an FM layer whose SHA sign is the same as that of the NM achieves efficient SOT-magnetization switching with the assistance of the SI-SOT. The contribution of the SI-SOT becomes salient for a weakly conductive NM layer, and conventional analyses that do not consider the SI-SOT can overestimate the SHA of the NM layer by a factor of more than 150., Comment: 9 pages, 4 figures

Topological quantum materials (TQMs) possess abundant and attractive spin physics, and a Weyl semimetal is the representative material because of the generation of spin polarization that is available for spin devices due to fictitious Weyl monopoles at the edge of the Weyl node. Meanwhile, a Weyl semimetal allows the other but unexplored spin polarization due to local symmetry breaking. Here, we report all-electric spin device operation using a type-II Weyl semimetal, WTe$_2$, at room temperature. The polarization of spins propagating in the all-electric device is perpendicular to the WTe$_2$ plane, which is ascribed to local in-plane symmetry breaking in WTe$_2$, yielding the spin polarization creation of propagating charged carriers, namely, the spin-polarized state creation from the non-polarized state. Systematic control experiments unequivocally negate unexpected artifacts, such as the anomalous Hall effect, the anisotropic magnetoresistance etc. Creation of all-electric spin devices made of TQMs and their operation at room temperature can pave a new pathway for novel spin devices made of TQMs resilient to thermal fluctuation., Comment: 20 pages, 4 figures

Whilst the g-factor can be anisotropic due to the spin-orbit interaction (SOI), its existence in solids cannot be simply asserted from a band structure, which hinders progress on studies from such the viewpoints. The g-factor in bismuth (Bi) is largely anisotropic; especially for holes at T-point, the g-factor perpendicular to the trigonal axis is negligibly small (< 0.112), whereas the g-factor along the trigonal axis is very large (62.7). We clarified in this work that the large g- factor anisotropy gives rise to the gigantic spin conversion anisotropy in Bi from experimental and theoretical approaches. Spin-torque ferromagnetic resonance was applied to estimate the spin conversion efficiency in rhombohedral (110) Bi to be 17%, which is unlike the negligibly small efficiency in Bi(111). Harmonic Hall measurements supports the large spin conversion efficiency in Bi(110). This is the first observation of gigantic spin conversion anisotropy as the clear manifestation of the g-factor anisotropy. Beyond the emblematic case of Bi, our study unveiled the significance of the g-factor anisotropy in condensed-matter physics and can pave a pathway toward establishing novel spin physics under g-factor control., Comment: 28 pages, 7 figures

Inplane magnetization reversal of a permalloy/platinum bilayer was detected using the spin rectification effect. Using a sub GHz microwave frequency to excite spin torque ferromagnetic resonance (ST FMR) in the bilayer induces two discrete DC voltages around an external static magnetic field of 0 mT. These discrete voltages depend on the magnetization directions of the permalloy and enable detection of the inplane magnetization reversal. The threshold current density for the magnetization reversal is from 10 to 20 MA/cm^2, the same order as for known spin orbit torque (SOT) switching with in-plane magnetization materials. The magnitude of the signal is the same or larger than that of the typical ST FMR signal; that is, detection of magnetization switching is highly sensitive in spite of deviation from the optimal ST-FMR condition. The proposed method is applicable to a simple device structure even for a small ferromagnetic electrode with a width of 100 nm.

Gate-induced modulation of the spin-orbit interaction (SOI) in a 1.5 nm-thick Pd thin film grown on a ferrimagnetic insulator was investigated. Efficient charge accumulation by ionic gating enables a substantial upshift in the Fermi level of the Pd film, which was corroborated by suppression of the resistivity in the Pd. Electromotive forces arising from the inverse spin Hall effect in Pd under spin pumping were substantially modulated by the gating, in consequence of the modulation of the spin Hall conductivity of Pd as in an ultrathin Pt film. The same experiment using a thin Cu film, for which the band structure is largely different from Pd and Pt and its SOI is quite small, provides further results supporting our claim. The results obtained help in developing a holistic understanding of the gate-tunable SOI in solids and confirm a previous explanation of the significant modulation of the spin Hall conductivity in an ultrathin Pt film by gating., Comment: 15 pages, 4 figures

We study spin transport through a suspended Cu channel by an electrical non-local 4-terminal measurement for future spin mechanics applications. A magnetoresistance due to spin transport through the suspended Cu channel is observed, and its magnitude is comparable to that of a conventional fixed Cu lateral spin valve. The spin diffusion length in the suspended Cu channel is estimated to be 340 nm at room temperature from the spin signal dependence on the distance between the ferromagnetic injector and detector electrodes. This value is found to be slightly shorter than in a fixed Cu. The decrease in the spin diffusion length in the suspended Cu channel is attributed to an increase in spin scattering originating from naturally oxidized Cu at the bottom of the Cu channel., Comment: 12 pages, 3 figures (To appear in Scientific Reports)

Direct visualizations of spin accumulation due to the enhanced spin Hall effect (SHE) in bismuth (Bi) - doped silicon (Si) at room temperature are realized by using helicity-dependent photovoltage (HDP) measurements. Under application of a dc current to the Bi-doped Si, clear helicity-dependent photovoltages are detected at the edges of the Si channel, indicating a perpendicular spin accumulation due to the SHE. In contrast, the HDP signals are negligibly small for phosphorus-doped Si. Compared to a platinum channel, which has a large spin Hall angle, more than two-orders of magnitude larger HDP signals are obtained in the Bi-doped Si.

A gate voltage application in a Si-based spin metal-oxide-semiconductor field-effect transistor (spin MOSFET) modulates spin accumulation voltages, where both electrical conductivity and drift velocity are modified while keeping constant electric current. An unprecedented reduction in the spin accumulation voltages in a Si spin MOSFET under negative gate voltage applications is observed in a high electric bias current regime. To support our claim, the electric bias current dependence of the spin accumulation voltage under the gate voltage applications is investigated in detail and compared to a spin drift diffusion model including the conductance mismatch effect. We proved that the drastic decrease of the mobility and spin lifetime in the Si channel is due to the optical phonon emission at the high electric bias current, which consequently reduced the spin accumulation voltage., Comment: 14 pages, 4 figures

Spin accumulation voltages in a non-degenerate Si spin valve are discussed quantitatively as a function of electric bias current using systematic experiments and model calculations. As an open question in semiconductor spintronics, the origin of the deviation of spin accumulation voltages measured experimentally in a non-degenerate Si spin valve is clarified from that obtained by model calculation using the spin drift diffusion equation including the effect of the spin-dependent interfacial resistance of tunneling barriers. Unlike the case of metallic spin valves, the bias dependence of the resistance-area product for a ferromagnet/MgO/Si interface, resulting in the reappearance of the conductance mismatch, plays a central role to induce the deviation., Comment: 19 pages, 6 figures

Broadband ferromagnetic resonance (bbFMR) spectroscopy is an established experimental tool to quantify magnetic properties. Due to frequency-dependent transmission of the microwave setup, bbFMR measurements in the frequency domain require a suitable background removal method. Here, we present a measurement and data analysis protocol that allows to perform quantitative frequency-swept bbFMR measurements without the need for a calibration of the microwave setup. The method, its limitations and advantages are described in detail. Finally the method is applied to evaluate FMR spectra of a permalloy thin film. The extracted material parameters are in very good agreement with those obtained using a conventional analysis in field-space.

We studied the spin injection in a NiFe(Py)/Si system using broadband ferromagnetic resonance spectroscopy. The Gilbert damping parameter of the Py layer on top of the Si channel was determined as a function of the Si doping concentration and Py layer thickness. For fixed Py thickness we observed an increase of the Gilbert damping parameter with decreasing resistivity of the Si channel. For a fixed Si doping concentration we measured an increasing Gilbert damping parameter for decreasing Py layer thickness. No increase of the Gilbert damping parameter was found Py/Si samples with an insulating interlayer. We attribute our observations to an enhanced spin injection into the low-resistivity Si by spin pumping., Comment: 15 pages, 3 Figures, 2 Tables (to appear Applied Physics Letters)

The inverse Rashba-Edelstein effect (IREE) is a spin conversion mechanism that recently attracts attention in spintronics and condensed matter physics. In this letter, we report an investigation of the IREE in Bi/Ag by using ferrimagnetic insulator yttrium iron garnet (YIG). We prepared two types of samples with opposite directions of the Rashba field by changing a stacking order of Bi and Ag. An electric current generated by the IREE was observed from both stacks, and an efficiency of spin conversion -characterized by the IREE length- was estimated by taking into account a number of contributions left out in previous studies. This study provides a further insight into the IREE spin conversion mechanism: important step towards achieving efficient spin-charge conversion devices., Comment: 16 pages, 4 figures, Supplemental Materials (To appear in Applied Physics Letters)

In this paper, we report on the investigation of (1) the transport properties of multi-carriers in semi-metal Bi and (2) the spin conversion physics in this semimetal system in a ferrimagnetic insulator, yttrium-iron-garnet. Hall measurements reveal that electrons and holes co-exist in the Bi, with electrons being the dominant carrier. The results of a spin conversion experiment corroborate the results of the Hall measurement; in addition, the inverse spin Hall effect governs the spin conversion in the semimetal/insulator system. This study provides further insights into spin conversion physics in semimetal systems., Comment: 16 pages, 4 Figures

A d-orbital electron has an anisotropic electron orbital and is a source of magnetism. The realization of a 2-dimensional electron gas (2DEG) embedded at a LaAlO3/SrTiO3 interface surprised researchers in materials and physical sciences because the 2DEG consists of 3d-electrons of Ti with extraordinarily large carrier mobility, even in the insulating oxide heterostructure. To date, a wide variety of physical phenomena, such as ferromagnetism and the quantum Hall effect, have been discovered in this 2DEG systems, demonstrating the ability of the d-electron 2DEG systems to provide a material platform for the study of interesting physics. However, because of both ferromagnetism and the Rashba field, long-range spin transport and the exploitation of spintronics functions have been believed difficult to implement in the d-electron 2DEG systems. Here, we report the experimental demonstration of room-temperature spin transport in the d-electron-based 2DEG at a LaAlO3/SrTiO3 interface, where the spin relaxation length is ca. exceeding 200 nm. Our finding, which counters the conventional understandings to d-electron 2DEGs, opens a new field of d-electron spintronics. Furthermore, this work highlights a novel spin function in the conductive oxide system., Comment: 30 pages, 5 Figures, 1 Table, including Supplemental Information

Conversion of pure spin current to charge current in single-layer graphene (SLG) is investigated by using spin pumping. Large-area SLG grown by chemical vapor deposition is used for the conversion. Efficient spin accumulation in SLG by spin pumping enables observing an electromotive force produced by the inverse spin Hall effect (ISHE) of SLG. The spin Hall angle of SLG is estimated to be 6.1*10-7. The observed ISHE in SLG is ascribed to its non-negligible spin-orbit interaction in SLG., Comment: 21 pages, 3 figures