Search

Beta-phase gallium oxide ($\beta$-Ga$_2$O$_3$) research has gained accelerated pace due to its superiorly large bandgap and commercial availability of large-diameter native substrates. However, the high acceptor activation energy obstructs the development of homojunction bipolar devices employing $\beta$-Ga$_2$O$_3$. The recently demonstrated semiconductor grafting technique provides an alternative and viable approach towards lattice-mismatched $\beta$-Ga$_2$O$_3$-based p-n heterojunctions with high quality interfaces. Understanding and quantitatively characterizing the band alignment of the grafted heterojunctions is crucial for future bipolar device development employing the grafting method. In this work, we present a systematic study of the band alignment in the grafted monocrystalline Si/$\beta$-Ga$_2$O$_3$ heterostructure by employing X-ray photoelectron spectroscopy (XPS). The core level peaks and valence band spectra of the Si, $\beta$-Ga$_2$O$_3$, and the grafted heterojunction were carefully obtained and analyzed. The band diagrams of the Si/$\beta$-Ga$_2$O$_3$ heterostructure were constructed using two individual methods, the core level peak method and the valence band spectrum method, by utilizing the different portions of the measured data. The reconstructed band alignments of the Si/$\beta$-Ga$_2$O$_3$ heterostructure using the two different methods are identical within the error range. The band alignment is also consistent with the prediction from the electron affinity values of Si and $\beta$-Ga$_2$O$_3$. The study suggests that the interface defect density in grafted Si/$\beta$-Ga$_2$O$_3$ heterostructure is at a sufficiently low level such that Fermi level pinning at the interface has been completely avoided and the universal electron affinity rule can be safely employed to construct the band diagrams of grafted monocrystalline Si/$\beta$-Ga$_2$O$_3$ heterostructures., Comment: 18 pages, 5 figures

In this work, we report the fabrication and characterizations of a monocrystalline GaAs/$\beta$-Ga$_2$O$_3$ p-n heterojunction by employing semiconductor grafting technology. The heterojunction was created by lifting off and transfer printing a p-type GaAs single crystal nanomembrane to an Al$_2$O$_3$-coated n-type$\beta$-Ga$_2$O$_3$ epitaxial substrate. The resultant heterojunction diodes exhibit remarkable performance metrics, including an ideality factor of 1.23, a high rectification ratio of 8.04E9 at +/- 4V, and a turn on voltage of 2.35 V. Furthermore, at +5 V, the diode displays a large current density of 2500 A/cm$^2$ along with a low ON resistance of 2 m$\Omega\cdot$cm$^2$., Comment: 14 pages, 5 figures

Beta phase gallium oxides, an ultrawide-bandgap semiconductor, has great potential for future power and RF electronics applications but faces challenges in bipolar device applications due to the lack of p-type dopants. In this work, we demonstrate monocrystalline AlGaAs_GaAsP_beta phase gallium oxides n-p-n double-heterojunctions, synthesized using semiconductor grafting technology. By transfer printing an n-AlGaAs_p-GaAsP nanomembrane to the n-beta phase-Ga$_2$O$_3$ epitaxial substrate, we simultaneously achieved AlGaAs_GaAsP epitaxial n-p junction diode with an ideality factor of 1.29 and a rectification ratio of 2.57E3 at +/- 2 V, and grafted GaAsP_beta_phase_gallium oxides p-n junction diode exhibiting an ideality factor of 1.36 and a rectification ratio of 4.85E2 at +/- 2 V., Comment: 12 pages, 4 figures

We develop a finite volume method for Maxwell's equations in materials whose electromagnetic properties vary in space and time. We investigate both conservative and non-conservative numerical formulations. High-order methods accurately resolve fine structures that develop due to the varying material properties. Numerical examples demonstrate the effectiveness of the proposed method in handling temporal variation and its efficiency relative to traditional 2nd-order FDTD., Comment: 15 pages, 8 figures

The Metaverse is a digital world that offers an immersive virtual experience. However, the Metaverse applications are bandwidth-hungry and delay-sensitive that require ultrahigh data rates, ultra-low latency, and hyper-intensive computation. To cater for these requirements, optical communication arises as a key pillar in bringing this paradigm into reality. We highlight in this paper the potential of optical communications in the Metaverse. First, we set forth Metaverse requirements in terms of capacity and latency; then, we introduce ultra-high data rates requirements for various Metaverse experiences. Then, we put forward the potential of optical communications to achieve these data rate requirements in backbone, backhaul, fronthaul, and access segments. Both optical fiber and optical wireless communication (OWC) technologies, as well as their current and future expected data rates, are detailed. In addition, we propose a comprehensive set of configurations, connectivity, and equipment necessary for an immersive Metaverse experience. Finally, we identify a set of key enablers and research directions such as analog neuromorphic optical computing, optical intelligent reflective surfaces (IRS), hollow core fiber (HCF), and terahertz (THz).

Photoelectrocatalytic (PEC) reduction of N2 to ammonia (NH3) is emerging as the potential alternative to overcome the standard Haber-Bosch approach. In this communication, solar N2 reduction was demonstrated with molybdenum carbide (Mo2C) co-catalyst assisted indium gallium nitride (InGaN) nanowires. The effect of aiding Mo2C on InGaN NWs arrests the dark current and demonstrated the saturation current under illumination was briefly elucidated. Large NH3 production of 7.2 gh-1cm-2 with high Faradaic efficiency of 12.6 % was realized at -0.2 V vs. reversible hydrogen electrode for the Mo2C/GaN/InGaN heterostructure. Notably, the proposed heterostructure also exemplifies excellent stability and reproducibility with excellent selectivity in the long-term chronoamperometry analysis. Further, the incorporation of GaN buffer layer in between Mo2C and InGaN NWs was deeply investigated. From Density Functional Theory (DFT) analysis, the incorporation of GaN buffer layer aids the suitable band edge position for the transfer of photogenerated charge carrier from InGaN to Mo2C co-catalyst, and unique 3d orbital of Mo2C is highly suitable to hold N2 for effective reduction to NH3.

Water covers 71% of the Earth's surface, where the steady increase in oceanic activities has promoted the need for reliable maritime communication technologies. The existing maritime communication systems involve terrestrial, aerial, and satellite networks. This paper presents a holistic overview of the different forms of maritime communications and provides the latest advances in various marine technologies. The paper first introduces the different techniques used for maritime communications over the RF and optical bands. Then, we present the channel models for RF and optical bands, modulation and coding schemes, coverage and capacity, and radio resource management in maritime communications. After that, the paper presents some emerging use cases of maritime networks, such as the Internet of Ships (IoS) and the ship-to-underwater Internet of things (IoT). Finally, we highlight a few exciting open challenges and identify a set of future research directions for maritime communication, including bringing broadband connectivity to the deep sea, using THz and visible light signals for on-board applications, and data-driven modeling for radio and optical marine propagation.

Due to the lack of effective p-type doping in GaN and the adverse effects of surface band-bending of GaN on electron transport, developing practical GaN heterojunction bipolar transistors has been impossible. The recently demonstrated approach of grafting n-type GaN with p-type semiconductors, like Si and GaAs, by employing ultrathin (UO) Al$_2$O$_3$ at the interface of Si/GaN and GaAs/GaN, has shown the feasibility to overcome the poor p-type doping challenge of GaN by providing epitaxy-like interface quality. However, the surface band-bending of GaN that could be influenced by the UO Al2O3 has been unknown. In this work, the band-bending of c-plane, Ga-face GaN with UO Al2O3 deposition at the surface of GaN was studied using X-ray photoelectron spectroscopy (XPS). The study shows that the UO Al2O3 can help in suppressing the upward band-bending of the c-plane, Ga-face GaN with a monotonic reduction trend of the upward band-bending energy from 0.48 eV down to 0.12 eV as the number of UO Al2O3 deposition cycles is increased from 0 to 20 cycles. The study further shows that the band-bending can be mostly recovered after removing the Al2O3 layer, concurring that the change in the density of fixed charge at the GaN surface caused by UO Al2O3 is the main reason for the surface band-bending modulation. The potential implication of the surface band-bending results of AlGaAs/GaAs/GaN npn heterojunction bipolar transistor (HBT) was preliminarily studied via Silvaco(R) simulations., Comment: 31 pages, 9 figures

Progress in optical wireless communication (OWC) has unleashed the potential to transmit data in an ultra-fast manner without incurring large investments and bulk infrastructure. OWC includes wireless data transmissions in three optical sub-bands; ultraviolet, visible, and infrared. This paper discusses installing infrared OWC, known as free space optics (FSO), systems on top of installed radio frequency (RF) networks for outdoor applications to benefit from the reliability of RF links and the unlicensed broad optical spectrum, and the large data rates carried by laser beams propagating in free space. We equally review commercially available solutions and the hardware requirements for RF and FSO technology co-existence. The potential of hybrid RF/FSO for space communication is further discussed. Finally, open problems and future research directions are presented.

As an emerging electricity-free cooling technology, radiative cooling employs outer space as the heat sink. With this, a sky-facing thermal emitter is usually required. Due to the black-body radiation limit at ambient temperature, the maximum cooling power density for a single-faced radiative cooling device is ~156.9 W/m2. Here we report a double-sided radiative cooling architecture using graded nanocomposite metamaterials (GNM) designed for a vertically aligned thermal emitter. This GNM structure possesses an optical absorption of over 90% throughout the solar spectrum, and exceeds 90% reflection in the mid-infrared spectral region. With this configuration, both sides of a planar thermal emitter can be used to perform radiative cooling and a record cooling power density beyond 280 W/m2 was realized in a single thin-film thermal emitter. Under the standard pressure, we realized a temperature reduction of 14 degree Celsius below the ambient temperature in the laboratory environment, and over 12 degree Celsius in the outdoor test., Comment: 17 pages, 4 figures

This paper proposes a unified statistical channel model to characterize the atmospheric turbulence induced distortions faced by orbital angular momentum (OAM) in free space optical (FSO) communication systems. In this channel model, the self-channel irradiance of OAM modes as well as crosstalk irradiances between different OAM modes are characterized by a Generalized Gamma distribution (GGD). The latter distribution is shown to provide an excellent match with simulated data for all regimes of atmospheric turbulence. Therefore, it can be used to overcome the computationally complex numerical simulations to model the propagation of OAM modes through atmospheric turbulent FSO channels. The GGD allows obtaining very simple tractable closed-form expressions for a variety of performance metrics. Indeed, the average capacity, the bit-error rate, and the outage probability are derived for FSO systems using single OAM mode transmission with direct detection. Furthermore, we extend our study to FSO systems using OAM mode diversity to improve the performance. By using a maximum ratio combining (MRC) at the receiver, the GGD is also shown to fit the simulated combined received optical powers. Finally, space-time (ST) coding is proposed to provide diversity and multiplexing gains, and the error probability is theoretically derived under the newly proposed generic model.

Exploiting light beams to carry information and deliver power is mooted as a potential technology to recharge batteries of future generation Internet of things (IoT) and Internet of underwater things (IoUT) devices while providing optical connectivity. Simultaneous lightwave information and power transfer (SLIPT) has been recently proposed as an efficient way for wireless power transfer between communicating terminals. In this article, we provide an overview of the various SLIPT techniques in time, power, and space domains. We additionally demonstrate two SLPIT scenarios through underwater channels. Moreover, we discuss the open issues related to the hardware as well as system deployment in harsh environments., Comment: 6 pages, 5 figures

Free space optical (FSO) communications using orbital angular momentum (OAM) modes has recently received a considerable interest. Propagating OAM modes through free space may be subject to atmospheric turbulence (AT) distortions that cause intermodal crosstalk and power disparities between OAM modes. In this article, we are interested in 2x2 multiple-input multiple-output (MIMO) FSO coherent communication systems using OAM. We propose a selection criterion for OAM modes to minimize the impact of AT. To further improve the obtained performance, we propose a space-time (ST) coding scheme at the transmitter. Through numerical simulations of the error probability, we show that the penalty from AT is completely absorbed for weak AT and considerable coding gains are obtained in the strong AT regime.

A unified statistical model is proposed to characterize turbulence-induced fading in underwater wireless optical communication (UWOC) channels in the presence of air bubbles and temperature gradient for fresh and salty waters, based on experimental data. In this model, the channel irradiance fluctuations are characterized by the mixture Exponential-Generalized Gamma (EGG) distribution. We use the expectation maximization (EM) algorithm to obtain the maximum likelihood parameter estimation of the new model. Interestingly, the proposed model is shown to provide a perfect fit with the measured data under all channel conditions for both types of water. The major advantage of the new model is that it has a simple mathematical form making it attractive from a performance analysis point of view. Indeed, we show that the application of the EGG model leads to closed-form and analytically tractable expressions for key UWOC system performance metrics such as the outage probability, the average bit-error rate, and the ergodic capacity. To the best of our knowledge, this is the first-ever comprehensive channel model addressing the statistics of optical beam irradiance fluctuations in underwater wireless optical channels due to both air bubbles and temperature gradient., Comment: Submitted to IEEE Transactions on Communications on 06-Oct-2017

Time, polarization, and wavelength multiplexing schemes have been used to satisfy the growing need of transmission capacity. Using space as a new dimension for communication systems has been recently suggested as a versatile technique to address future bandwidth issues. We review the potentials of harnessing the space as an additional degree of freedom for communication applications including free space optics, optical fiber installation, underwater wireless optical links, on-chip interconnects, data center indoor connections, radio frequency and acoustic communications. We focus on the orbital angular momentum (OAM) modes and equally identify the challenges related to each of the applications of spatial modes and the particular OAM modes in communication. We further discuss the perspectives of this emerging technology. Finally, we provide the open research directions and we discuss the practical deployment of OAM communication links for different applications.

Vapor condensation plays a crucial role in solar water-purification technologies. Conventional condensers in solar water-purification systems do not provide sufficient cooling power for vapor condensation, limiting the water production rate to $0.4 L m^{-2} hour^{-1}$. On the other hand, radiative dew condensation, a technique used by existing radiative dew condensers, only works at nighttime and is incompatible with solar water-purification technologies. Here, we develop daytime radiative condensers that reflect almost all solar radiation, and can thus create dew water even in direct sunlight. Compared to state-of-art condensers, our daytime radiative condenser doubles the production of purified water over a 24-hour period. The integration of our daytime radiative condenser with solar water-purification systems can increase the water production rate in sunlight from $0.4 L m^{-2} hour^{-1}$ to more than $1 L m^{-2} hour^{-1}$.