Search

Induction motors are widely used machines in a variety of applications as primary components for generating rotary motion. This is mainly due to their high efficiency, robustness, and ease of control. Despite their high robustness, these machines can experience failures throughout their lifespan due to various mechanical, electrical, and environmental factors. To prevent irreversible failures and all the implications and costs associated with breakdowns, various methodologies have been developed over the years. Many of these methodologies have focused on analyzing various physical quantities, either during start-up transients or during steady-state operations. This involves the use of specific techniques depending on the focus of the methodology (start-up transients or steady-state) to obtain optimal results. In this regard, it is of great importance to develop methods capable of separating and detecting the start-up transient of the motor from the steady state. This will enable the development of automatic diagnostic methodologies focused on the specific operating state of the motor. This paper proposes a methodology for the automatic detection of start-up transients in induction motors by using magnetic stray flux signals and processing by means of statistical indicators in time-sliding windows, the calculation of variances with a proposed method, and obtaining optimal values for the design parameters by using a Particle Swarm Optimization (PSO). The results obtained demonstrate the effectiveness of the proposed method for the start-up and steady-state regimes automatic separation, which is validated on a 0.746 kW induction motor supplied by a variable frequency drive (VFD). [ABSTRACT FROM AUTHOR]

Bearings are one of the most essential elements in an induction motor, and they are built with different materials and constructions according to their application. These components are usually one of the most failure-prone parts of an electric motor, so correct and accurate measurements, instrumentation, and processing methods are required to prevent and detect the presence of different failures. This work develops a methodology based on the fusion of current and magnetic stray flux signals, calculation of statistical and non-statistical indicators, genetic algorithms (GAs), linear discriminant analysis (LDA), and neural networks. The proposed approach achieves a diagnostic effectiveness of 99.8% for detecting various damages in the outer race at 50 Hz frequency and 96.6% at 60 Hz. It also demonstrates 99.8% effectiveness for detecting damages in the presence of contaminants in lubrication at 50 Hz and 97% at 60 Hz. These results apply across metallic, ceramic, and hybrid bearings. [ABSTRACT FROM AUTHOR]

Induction motors (IM) play a fundamental role in the industrial sector because they are robust, efficient, and low-cost machines. Changes in the environment, installation errors, or modifications to working conditions can generate faults in induction motors. The trend on IM fault detection is focused on the design techniques and sensors capable of evaluating multiple faults with various signals using non-invasive analysis. The methodology is based on processing electric current signals by applying the short-time Fourier transform (STFT). Additionally, the computation of the mean and standard deviation of infrared thermograms is proposed as main indicators. The proposed system combines both parameters by means of Support Vector Machine and k-nearest-neighbor classifiers. The development of the diagnostic system was done with digital hardware implementations using a Xilinx PYNQ Z2 card that integrates an FPGA with a microprocessor, thus taking advantage of the acquisition and processing of digital signals and images in hardware. The proposed method has proved to be effective for the classification of healthy (HLT), misalignment (MAMT), unbalance (UNB), damaged bearing (BDF), and broken rotor bar (BRB) faults with an accuracy close to 99%. [ABSTRACT FROM AUTHOR]

Industrial processes involving manipulator robots require accurate positioning and orienting for high-quality results. Any decrease in positional accuracy can result in resource wastage. Machine learning methodologies have been proposed to analyze failures and wear in electronic and mechanical components, affecting positional accuracy. These methods are typically implemented in software for offline analysis. In this regard, this work proposes a methodology for detecting a positional deviation in the robot's joints and its implementation in a digital system of proprietary design based on a field-programmable gate array (FPGA) equipped with several developed intellectual property cores (IPcores). The method implemented in FPGA consists of the analysis of current signals from a UR5 robot using discrete wavelet transform (DWT), statistical indicators, and a neural network classifier. IPcores are developed and tested with synthetic current signals, and their effectiveness is validated using a real robot dataset. The results show that the system can classify the synthetic robot signals for joints two and three with 97% accuracy and the real robot signals for joints five and six with 100% accuracy. This system aims to be a high-speed reconfigurable tool to help detect robot precision degradation and implement timely maintenance strategies. [ABSTRACT FROM AUTHOR]

Outrunner brushless DC motors (BLDC) are a type of permanent magnet synchronous motor (PMSM) widely used in electric micro-mobility vehicles, such as scooters, electric bicycles, wheelchairs, and segways, among others. Those vehicles have many operational constraints because they are driven directly by the user with light protective wearing. Therefore, to improve control strategies to make the drive safer, it is essential to model the traction system over a wide range of operating conditions in a street environment. In this work, we developed an electro-mechanical model based on the Hardware-in-the-Loop (HIL) structure for a two-wheeler electric scooter, using the BLDC motor to explore its response and to test linear controllers for speed and torque management under variable operating conditions. The proposed model includes motor parameters, power electronics component characteristics, mechanical structure, and external operating conditions. Meanwhile the linear controllers will be adjusted or tuned though a heuristic approach based on Genetic Algorithms (GAs) to optimize the system's response. The HIL scheme will be able to simulate a wide range of conditions such as user weight, slopes, wind speed changes, and combined conditions. The designed model can be used to improve the design of the controller and estimate mechanical and electrical loads. Finally, the results of the controller tests show how the proposed cascade scheme, tuned through the GA, improves the system behavior and reduces the mean square error with respect to a classical tuning approach between 20% and 60%. [ABSTRACT FROM AUTHOR]