Search

The movement of solid material into and between unit operations within a biorefinery is a bottleneck in reaching design capacity, with formation of biomass slurries needed to introduce feedstock. Corn stover slurries have been achieved from dilute acid, pretreated materials resulting in slurry concentrations of up to about 150 g/L, above which flowability is compromised. We report a new strategy to liquefy corn stover at higher solids concentration (300 g/L) by initially cooking it with the enzyme mimetic maleic acid at 40 mM and 150 °C. This is followed by 6 h of enzymatic modification at 1 FPU (2.2 mg protein)/g solids, resulting in a yield stress of 171 Pa after 6 h and 58 Pa in 48 h compared to 6806 Pa for untreated stover. Mimetic treatment of corn stover pellets minimizes the inhibitory effect of xylo-oligomers on hydrolytic enzymes. This strategy allows for the delivery of solid lignocellulosic slurry into a pretreatment reactor by pumping, improving operability of a biorefinery., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The measurement of yield stress and shear thinning flow behavior of slurries formed from unpretreated corn stover at solids loadings of 100-300 g/L provides a key metric for the ability to move, pump, and mix this lignocellulosic slurry, particularly since corn stover slurries represent a major potential feedstock for biorefineries. This study compared static yield stress values and flow hysteresis of corn stover slurries of 100, 150, 200, 250, and 300 g/L, after these slurries were formed by adding pellets to a cellulase enzyme solution (Celluclast 1.5 L) in a fed-batch manner. A rotational rheometer was used to quantitate relative yield stress and its dependence on processing history at insoluble solids concentrations of 4%-21% (wt/vol). Key findings confirmed previous observations that yield stress increases with solids loadings and reaches ~3000 Pa at 25% (wt/vol) solids concentration compared to ~200 Pa after enzyme liquefaction. While optimization of slurry forming (i.e., liquefaction) conditions remains to be done, metrics for quantifying liquefaction extent are needed. The method for obtaining comparative metrics is demonstrated here and shows that the yield stress, shear thinning and shear thickening flow behaviors of enzyme liquefied corn stover slurries can be analyzed using a wide-gap rheometry setup with relative measuring geometries to mimic the conditions that may exist in a mixing vessel of a bioreactor while applying controlled and precise levels of strain., (© 2021 American Institute of Chemical Engineers.)

Background: Low-temperature swelling of cotton linter cellulose and subsequent gelatinization in trifluoroacetic acid (TFA) greatly enhance rates of enzymatic digestion or maleic acid-AlCl 3 catalyzed conversion to hydroxymethylfurfural (HMF) and levulinic acid (LA). However, lignin inhibits low-temperature swelling of TFA-treated intact wood particles from hybrid poplar ( Populus tremula  ×  P. alba ) and results in greatly reduced yields of glucose or catalytic conversion compared to lignin-free cellulose. Previous studies have established that wood particles from transgenic lines of hybrid poplar with high syringyl (S) lignin content give greater glucose yields following enzymatic digestion., Results: Low-temperature (- 20 °C) treatment of S-lignin-rich poplar wood particles in TFA slightly increased yields of glucose from enzymatic digestions and HMF and LA from maleic acid-AlCl 3 catalysis. Subsequent gelatinization at 55 °C resulted in over 80% digestion of cellulose in only 3 to 6 h with high-S-lignin wood, compared to 20-60% digestion in the wild-type poplar hybrid and transgenic lines high in guaiacyl lignin or 5-hydroxy-G lignin. Disassembly of lignin in woody particles by Ni/C catalytic systems improved yields of glucose by enzymatic digestion or catalytic conversion to HMF and LA. Although lignin was completely removed by Ni/C-catalyzed delignification (CDL) treatment, recalcitrance to enzymatic digestion of cellulose from the high-S lines was reduced compared to other lignin variants. However, cellulose still exhibited considerable recalcitrance to complete enzymatic digestion or catalytic conversion after complete delignification. Low-temperature swelling of the CDL-treated wood particles in TFA resulted in nearly complete enzymatic hydrolysis, regardless of original lignin composition., Conclusions: Genetic modification of lignin composition can enhance the portfolio of aromatic products obtained from lignocellulosic biomass while promoting disassembly into biofuel and bioproduct substrates. CDL enhances rates of enzymatic digestion and chemical conversion, but cellulose remains intrinsically recalcitrant. Cold TFA is sufficient to overcome this recalcitrance after CDL treatment. Our results inform a 'no carbon left behind' strategy to convert total woody biomass into lignin, cellulose, and hemicellulose value streams for the future biorefinery., Competing Interests: Competing interestsThe authors declare that they have no competing interests.

Background: Plant biomass is an abundant but underused feedstock for bioenergy production due to its complex and variable composition, which resists breakdown into fermentable sugars. These feedstocks, however, are routinely degraded by many uncommercialized microbes such as anaerobic gut fungi. These gut fungi express a broad range of carbohydrate active enzymes and are native to the digestive tracts of ruminants and hindgut fermenters. In this study, we examine gut fungal performance on these substrates as a function of composition, and the ability of this isolate to degrade inhibitory high syringyl lignin-containing forestry residues., Results: We isolated a novel fungal specimen from a donkey in Independence, Indiana, United States. Phylogenetic analysis of the Internal Transcribed Spacer 1 sequence classified the isolate as a member of the genus Piromyces within the phylum Neocallimastigomycota ( Piromyces sp. UH3-1, strain UH3-1). The isolate penetrates the substrate with an extensive rhizomycelial network and secretes many cellulose-binding enzymes, which are active on various components of lignocellulose. These activities enable the fungus to hydrolyze at least 58% of the glucan and 28% of the available xylan in untreated corn stover within 168 h and support growth on crude agricultural residues, food waste, and energy crops. Importantly, UH3-1 hydrolyzes high syringyl lignin-containing poplar that is inhibitory to many fungi with efficiencies equal to that of low syringyl lignin-containing poplar with no reduction in fungal growth. This behavior is correlated with slight remodeling of the fungal secretome whose composition adapts with substrate to express an enzyme cocktail optimized to degrade the available biomass., Conclusions: Piromyces sp. UH3-1, a newly isolated anaerobic gut fungus, grows on diverse untreated substrates through production of a broad range of carbohydrate active enzymes that are robust to variations in substrate composition. Additionally, UH3-1 and potentially other anaerobic fungi are resistant to inhibitory lignin composition possibly due to changes in enzyme secretion with substrate. Thus, anaerobic fungi are an attractive platform for the production of enzymes that efficiently use mixed feedstocks of variable composition for second generation biofuels. More importantly, our work suggests that the study of anaerobic fungi may reveal naturally evolved strategies to circumvent common hydrolytic inhibitors that hinder biomass usage.

Bacterial interactions with surfaces are at the heart of many infection-related problems in healthcare. In this work, the interactions of clinically relevant bacteria with immobilized liquid (IL) layers on oil-infused polymers are investigated. Although oil-infused polymers reduce bacterial adhesion in all cases, complex interactions of the bacteria and liquid layer under orbital flow conditions are uncovered. The number of adherent Escherichia coli cells over multiple removal cycles increases in flow compared to static growth conditions, likely due to a disruption of the liquid layer continuity. Surprisingly, however, biofilm formation appears to remain low regardless of growth conditions. No incorporation of the bacteria into the layer is observed. Bacterial type is also found to affect the number of adherent cells, with more E. coli remaining attached under dynamic orbital flow than Staphylococcus aureus, Pseudomonas aeruginosa under identical conditions. Tests with mutant E. coli lacking flagella confirm that flagella play an important role in adhesion to these surfaces. The results presented here shed new light on the interaction of bacteria with IL layers, highlighting the fundamental differences between oil-infused and traditional solid interfaces, as well as providing important information for their eventual translation into materials that reduce bacterial adhesion in medical applications., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Surface fouling and undesired adhesion are nearly ubiquitous problems in the medical field, complicating everything from surgeries to routine daily care of patients. Recently, the concept of immobilized liquid (IL) interfaces has been gaining attention as a highly versatile new approach to antifouling, with a wide variety of promising applications in medicine. Here, we review the general concepts behind IL layers and discuss the fabrication strategies on medically relevant materials developed so far. We also summarize the most important findings to date on applications of potential interest to the medical community, including the use of these surfaces as anti-thrombogenic and anti-bacterial materials, anti-adhesive textiles, high-performance coatings for optics, and as unique platforms for diagnostics. Although the full potential and pitfalls of IL layers in medicine are just beginning to be explored, we believe that this approach to anti-adhesive surfaces will prove broadly useful for medical applications in the future., (© 2016 by the Society for Experimental Biology and Medicine.)

The present study evaluated butanol production from switchgrass based on hydrothermolysis pretreatment. The inhibitors present in the hydrolyzates were measured. Results showed poor butanol production (1g/L) with non-detoxified hydrolyzate. However, adjusting the pH of the non-detoxified hydrolyzate to 6 and adding 4 g/L CaCO3 increased butanol formation to about 6g/L. There was about 1g/L soluble lignin content (SLC), and various levels of furanic and phenolic compounds found in the non-detoxified hydrolyzate. Detoxification of hydrolyzates with activated carbon increased the butanol titer to 11 g/L with a total acetone, butanol and ethanol (ABE) concentration of 17 g/L. These results show the potential of butanol production from hydrothermolysis pretreated switchgrass., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Few researchers have studied the predictive ability of childhood animal cruelty motives as they are associated with later recurrent violence toward humans. Based on a sample of 180 inmates at one medium- and one maximum-security prison in a Southern state, the present study examines the relationship among several retrospectively identified motives (fun, out of anger, hate for the animal, and imitation) for childhood animal cruelty and the later commission of violent crimes (murder, rape, assault, and robbery) against humans. Almost two thirds of the inmates reported engaging in childhood animal cruelty for fun, whereas almost one fourth reported being motivated either out of anger or imitation. Only one fifth of the respondents reported they had committed acts of animal cruelty because they hated the animal. Regression analyses revealed that recurrent animal cruelty was the only statistically significant variable in the model. Respondents who had committed recurrent childhood animal cruelty were more likely to have had committed recurrent adult violence toward humans. None of the motives for committing childhood animal cruelty had any effect on later violence against humans.

While probability sampling has the advantage of permitting unbiased population estimates, many past and existing monitoring schemes do not employ probability sampling. We describe and demonstrate a general procedure for augmenting an existing probability sample with data from nonprobability-based surveys ('found' data). The procedure, first proposed by Overton (1990), uses sampling frame attributes to group the probability and found samples into similar subsets. Subsequently, this similarity is assumed to reflect the representativeness of the found sample for the matching subpopulation. Two methods of establishing similarity and producing estimates are described: pseudo-random and calibration. The pseudo-random method is used when the found sample can contribute additional information on variables already measured for the probability sample, thus increasing the effective sample size. The calibration method is used when the found sample contributes information that is unique to the found observations. For either approach, the found sample data yield observations that are treated as a probability sample, and population estimates are made according to a probability estimation protocol. To demonstrate these approaches, we applied them to found and probability samples of stream discharge data for the southeastern US.