Search

Abstract\nHIGHLIGHTSThe effect of gradients of elevated glucose and low dissolved oxygen in the addition zone of fed-batch E. coli thermoinduced recombinant high cell density cultures can be evaluated through two-compartment scale-down models. Here, glucose was fed in the inlet of a plug flow bioreactor (PFB) connected to a stirred tank bioreactor (STB). E. coli cells diminished growth from 48.2 ± 2.2 g/L in the stage of RP production if compared to control (STB) with STB-PFB experiments, when residence time inside the PFB was 25 s (34.1 ± 3.5 g/L) and 40 s (25.6 ± 5.1 g/L), respectively. The recombinant granulocyte-macrophage colony-stimulating factor (rHuGM-CSF) production decreased from 34 ± 7% of RP in inclusion bodies (IB) in control cultures to 21 ± 8%, and 7 ± 4% during the thermoinduction production phase when increasing residence time inside the PFB to 25 s and 40 s, respectively. This, along with the accumulation of acetic and formic acid (up to 4 g/L), indicates metabolic redirection of central carbon routes through metabolic flow and mixed acid fermentation. Special care must be taken when producing a recombinant protein in heat-induced E. coli, because the yield and productivity of the protein decreases as the size of the bioreactors increases, especially if they are carried at high cell density.Thermoinduced recombinant E. coli grew less in a two-compartment scale-down model.Heat-inducible E. coli cultures at a large scale significantly decrease recombinant protein production.The accumulation of acetic and formic acid increases when E. coli is exposed to glucose and oxygen gradients.The axial flow pattern inside the PFB mimics glucose and dissolved oxygen gradients at the industrial scale.Thermoinduced recombinant E. coli grew less in a two-compartment scale-down model.Heat-inducible E. coli cultures at a large scale significantly decrease recombinant protein production.The accumulation of acetic and formic acid increases when E. coli is exposed to glucose and oxygen gradients.The axial flow pattern inside the PFB mimics glucose and dissolved oxygen gradients at the industrial scale. [ABSTRACT FROM AUTHOR]

Background: The temperature upshift has been widely used as an induction system to produce recombinant proteins (RPs). However, thermoinduction could affect bacterial metabolism, RP production, and RP aggregation. Understanding the structure and functionality of those aggregates, known as inclusion bodies (IBs), is a research area of interest in bioprocesses being scarcely studied under thermoinduction. Here, we describe the effect of the thermoinduction (39°C or 42°C) on the production of the recombinant human granulocyte-macrophage colony-stimulating factor (rHuGM-CSF) using Escherichia coli W3110 under the system kpL/cI857. Results: Results indicated that at 39°C, the production of biomass was almost doubled as well as the acetate accumulation compared to 42°C. Cultures thermoinduced at 42°C improved 1.5-fold the total protein over biomass yield and 1.25-fold the RP over total protein yield. Furthermore, 42°C accelerated the onset of IB formation, changing its architecture. Additionally, IBs formed at 42°C were less soluble and presented higher disorderly structures compared with IBs formed at 39°C, enriched in a-helix and amyloidal-like structures. Conclusions: This study highlights the observation that IBs attain different architecture in response to small changes in environmental conditions, such as the induction temperature, being this helpful information to improve thermoinduced bioprocesses. [ABSTRACT FROM AUTHOR]

Etanercept is a recombinant fusion protein approved for the treatment of TNF-α mediated diseases such as rheumatoid arthritis (RA), psoriasis, psoriatic arthritis, and ankylosing spondylitis. Herein, we present an evaluation of the physicochemical and biological properties of a biosimilar etanercept and its reference product followed by a clinical study in patients diagnosed with RA intended to demonstrate comparability of their immunomodulatory activity. Identity analyses showed a total correspondence of the primary and higher-order structure between the two products. In regard to intrinsic heterogeneity, both products showed to be highly heterogenous; however the biosimilar etanercept exhibited similar charge and glycan heterogeneity intervals compared to the reference product. Apoptosis inhibition assay also showed that, despite the high degree of heterogeneity exhibited by both products, no significant differences exist in their in vitro activity. Finally, the clinical assessment conducted in RA-diagnosed patients did not show significant differences in the evaluated pharmacodynamic markers of both products. Collectively, the results from the comparability exercise provide convincing evidence that the evaluated biosimilar etanercept can be considered an effective alternative for the treatment of RA. [ABSTRACT FROM AUTHOR]

Background: Developing countries have an estimate of ten times more approved biosimilars than developed countries. This disparity demands the need of an objective regulation that incorporates health policies according to the technological and economical capabilities of each country. One of the challenges lies on the establishment of comparability principles based on a physicochemical and biological characterization that should determine the extent of additional non-clinical and clinical studies. This is particularly relevant for licensed biosimilars in developing countries, which have an extensive clinical experience since their approval as generics, in some cases more than a decade. To exemplify the current status of biosimilars in Mexico, a characterization exercise was conducted on licensed filgrastim biosimilars using pharmacopeial and extended characterization methodologies. Results: Most of the evaluated products complied with the pharmacopeial criteria and showed comparability in their Critical Quality Attributes (CQAs) towards the reference product. These results were expected in accordance with their equivalent performance during their licensing as generics. Accordingly, a rational approval and registration renewal scheme for biosimilars is proposed, that considers the proper identification of CQAs and its thoroughly evaluation using selected techniques. Conclusions: This approach provides support to diminish uncertainty of exhibiting different pharmacological profiles and narrows or even avoids the necessity of comparative clinical studies. Ultimately, this proposal is intended to improve the accessibility to high quality biosimilars in Latin America and other developing countries. [ABSTRACT FROM AUTHOR]

Rituximab is a chimeric monoclonal antibody employed for the treatment of CD20-positive B-cell non-Hodgkin’s lymphoma, chronic lymphocytic leukemia, rheumatoid arthritis, granulomatosis with polyangiitis and microscopic polyangiitis. It binds specifically to the CD20 antigen expressed on pre-B and consequently on mature B-lymphocytes of both normal and malignant cells, inhibiting their proliferation through apoptosis, CDC, and ADCC mechanisms. The immunomodulatory activity of rituximab is closely related to critical quality attributes that characterize its chemical composition and spatial configuration, which determine the recognition of CD20 and the binding to receptors or factors involved in its effector functions, while regulating the potential immunogenic response. Herein, we present a physicochemical and biological characterization followed by a pharmacodynamics and immunogenicity study to demonstrate comparability between two products containing rituximab. The physicochemical and biological characterization revealed that both products fit within the same response intervals exhibiting the same degree of variability. With regard to clinical response, both products depleted CD20+ B-cells until posttreatment recovery and no meaningful differences were found in their pharmacodynamic profiles. The evaluation of anti-chimeric antibodies did not show differential immunogenicity among products. Overall, these data confirm that similarity of critical quality attributes results in a comparable immunomodulatory activity. [ABSTRACT FROM AUTHOR]

Rituximab is a chimeric monoclonal antibody employed for the treatment of CD20-positive B-cell non-Hodgkin's lymphoma, chronic lymphocytic leukemia, rheumatoid arthritis, granulomatosis with polyangiitis and microscopic polyangiitis. It binds specifically to the CD20 antigen expressed on pre-B and consequently on mature B-lymphocytes of both normal and malignant cells, inhibiting their proliferation through apoptosis, CDC, and ADCC mechanisms. The immunomodulatory activity of rituximab is closely related to critical quality attributes that characterize its chemical composition and spatial configuration, which determine the recognition of CD20 and the binding to receptors or factors involved in its effector functions, while regulating the potential immunogenic response. Herein, we present a physicochemical and biological characterization followed by a pharmacodynamics and immunogenicity study to demonstrate comparability between two products containing rituximab. The physicochemical and biological characterization revealed that both products fit within the same response intervals exhibiting the same degree of variability. With regard to clinical response, both products depleted CD20+ B-cells until posttreatment recovery and no meaningful differences were found in their pharmacodynamic profiles. The evaluation of anti-chimeric antibodies did not show differential immunogenicity among products. Overall, these data confirm that similarity of critical quality attributes results in a comparable immunomodulatory activity. [ABSTRACT FROM AUTHOR]