Search

We present an analysis of four Chandra observations of the 45 Myr old DS Tuc binary system. We observed X-ray variability of both stars on timescales from hours to months, including two strong X-ray flares from star A. The implied flaring rates are in agreement with past observations made with XMM-Newton, though these rates remain imprecise due to the relatively short total observation time. We find a clear, monotonic decline in the quiescent level of the star by a factor 1.8 across eight months, suggesting stellar variability that might be due to an activity cycle. If proven through future observations, DS Tuc A would be the youngest star for which a coronal activity cycle has been confirmed. The variation in our flux measurements across the four visits is also consistent with the scatter in empirical stellar X-ray relationships with Rossby number. In simulations of the possible evolution of the currently super-Neptune-sized planet DS Tuc Ab, we find a range of scenarios for the planet once it reaches a typical field age of 5 Gyr, from Neptune-size down to a completely stripped super-Earth. Improved constraints on the planet's mass in the future would significantly narrow these possibilities. We advocate for further Chandra observations to better constrain the variability of this important system., Comment: 20 pages, 10 figures, 6 tables. Accepted for publication in ApJ

The Inflation Reduction Act subsidizes the deployment of clean electricity, hydrogen production, and carbon capture and storage, which could enable additional actions by other federal, state, and local policymakers to reduce emissions. Power plant rules finalized by the Environmental Protection Agency (EPA) in 2024 are one such example of complementary policies. The rules establish emissions intensity standards, not technology mandates, meaning power plant owners can choose from a range of technologies and control options provided that emissions standards are met. This flexibility makes electricity systems modeling important to understand the potential effects of these regulations. We report below a multi-model analysis of the EPA power plant rules that can provide timely information, including for other countries and states, on emissions impacts, policy design for electricity decarbonization, power sector investments and retirements, cost impacts, and load growth. We also discuss related technical, political, and legal uncertainties.

With the growing demand for developing speech-based interaction models, end-to-end Spoken Language Models (SLMs) have emerged as a promising solution. When engaging in conversations with humans, it is essential for these models to comprehend a wide range of world knowledge. In this paper, we introduce VoxEval, a novel speech question-answering benchmark specifically designed to assess SLMs' knowledge understanding through purely speech-based interactions. Unlike existing AudioQA benchmarks, VoxEval maintains speech format for both questions and answers, evaluates model robustness across diverse audio conditions (varying timbres, audio qualities, and speaking styles), and pioneers the assessment of challenging domains like mathematical problem-solving in spoken format. Our comprehensive evaluation of recent SLMs using VoxEval reveals significant performance limitations in current models, highlighting crucial areas for future improvements.

The metallic delafossites host ultra-high mobility carriers in the bulk, while at their polar surfaces, intrinsic electronic reconstructions stabilise markedly distinct electronic phases, from charge-disproportionated insulators, to Rashba-split heavy-hole gases and ferromagnetic metals. The understanding of these phases has been strongly informed by surface spectroscopic measurements, but previous studies have been complicated by the presence of spatially varying terminations of the material surface. Here, we demonstrate the potential of microscopic-area angle-resolved photoemission to overcome these challenges. Our measurements of the model compound PdCoO$_2$ yield extremely high-quality spectra of the electronic structure, which allows us to place new experimental constraints on the weak electron-phonon coupling in the bulk of PdCoO$_2$, while revealing much stronger interactions at its surfaces. While the CoO$_2$-terminated surface exhibits a conventional weak-coupling behavior, our measurements reveal surprising spectroscopic signatures of polaron formation at the Pd-terminated surface, despite its pronounced metallicity. Together, our findings reveal how mode and symmetry-selective couplings can markedly tune the electron-phonon interactions in a single host material, here opening routes to stabilise surprisingly persistent polaronic quasiparticles., Comment: 17 pages including supplementary information

We consider the challenge of estimating the model parameters and latent states of general state-space models within a Bayesian framework. We extend the commonly applied particle Gibbs framework by proposing an efficient particle generation scheme for the latent states. The approach efficiently samples particles using an approximate hidden Markov model (HMM) representation of the general state-space model via a deterministic grid on the state space. We refer to the approach as the grid particle Gibbs with ancestor sampling algorithm. We discuss several computational and practical aspects of the algorithm in detail and highlight further computational adjustments that improve the efficiency of the algorithm. The efficiency of the approach is investigated via challenging regime-switching models, including a post-COVID tourism demand model, and we demonstrate substantial computational gains compared to previous particle Gibbs with ancestor sampling methods.

Cold-start problem is one of the long-standing challenges in recommender systems, focusing on accurately modeling new or interaction-limited users or items to provide better recommendations. Due to the diversification of internet platforms and the exponential growth of users and items, the importance of cold-start recommendation (CSR) is becoming increasingly evident. At the same time, large language models (LLMs) have achieved tremendous success and possess strong capabilities in modeling user and item information, providing new potential for cold-start recommendations. However, the research community on CSR still lacks a comprehensive review and reflection in this field. Based on this, in this paper, we stand in the context of the era of large language models and provide a comprehensive review and discussion on the roadmap, related literature, and future directions of CSR. Specifically, we have conducted an exploration of the development path of how existing CSR utilizes information, from content features, graph relations, and domain information, to the world knowledge possessed by large language models, aiming to provide new insights for both the research and industrial communities on CSR. Related resources of cold-start recommendations are collected and continuously updated for the community in https://github.com/YuanchenBei/Awesome-Cold-Start-Recommendation.

Disease name normalization is an important task in the medical domain. It classifies disease names written in various formats into standardized names, serving as a fundamental component in smart healthcare systems for various disease-related functions. Nevertheless, the most significant obstacle to existing disease name normalization systems is the severe shortage of training data. Consequently, we present a novel data augmentation approach that includes a series of data augmentation techniques and some supporting modules to help mitigate the problem. Through extensive experimentation, we illustrate that our proposed approach exhibits significant performance improvements across various baseline models and training objectives, particularly in scenarios with limited training data, Comment: The Version of Record of this contribution is published in 2024 IEEE International Conference on Bioinformatics and Biomedicine (BIBM 2024)

The rapid advancement of foundation modelslarge-scale neural networks trained on diverse, extensive datasetshas revolutionized artificial intelligence, enabling unprecedented advancements across domains such as natural language processing, computer vision, and scientific discovery. However, the substantial parameter count of these models, often reaching billions or trillions, poses significant challenges in adapting them to specific downstream tasks. Low-Rank Adaptation (LoRA) has emerged as a highly promising approach for mitigating these challenges, offering a parameter-efficient mechanism to fine-tune foundation models with minimal computational overhead. This survey provides the first comprehensive review of LoRA techniques beyond large Language Models to general foundation models, including recent techniques foundations, emerging frontiers and applications of low-rank adaptation across multiple domains. Finally, this survey discusses key challenges and future research directions in theoretical understanding, scalability, and robustness. This survey serves as a valuable resource for researchers and practitioners working with efficient foundation model adaptation.

We extend the study of retrieval problems in distributed networks, focusing on improving the efficiency and resilience of protocols in the \emph{Data Retrieval (DR) Model}. The DR Model consists of a complete network (i.e., a clique) with $k$ peers, up to $\beta k$ of which may be Byzantine (for $\beta \in [0, 1)$), and a trusted \emph{External Data Source} comprising an array $X$ of $n$ bits ($n \gg k$) that the peers can query. Additionally, the peers can also send messages to each other. In this work, we focus on the Download problem that requires all peers to learn $X$. Our primary goal is to minimize the maximum number of queries made by any honest peer and additionally optimize time. We begin with a randomized algorithm for the Download problem that achieves optimal query complexity up to a logarithmic factor. For the stronger dynamic adversary that can change the set of Byzantine peers from one round to the next, we achieve the optimal time complexity in peer-to-peer communication but with larger messages. In broadcast communication where all peers (including Byzantine peers) are required to send the same message to all peers, with larger messages, we achieve almost optimal time and query complexities for a dynamic adversary. Finally, in a more relaxed crash fault model, where peers stop responding after crashing, we address the Download problem in both synchronous and asynchronous settings. Using a deterministic protocol, we obtain nearly optimal results for both query complexity and message sizes in these scenarios., Comment: 39 pages

Frontier artificial intelligence (AI) systems present both benefits and risks to society. Safety cases - structured arguments supported by evidence - are one way to help ensure the safe development and deployment of these systems. Yet the evolving nature of AI capabilities, as well as changes in the operational environment and understanding of risk, necessitates mechanisms for continuously updating these safety cases. Typically, in other sectors, safety cases are produced pre-deployment and do not require frequent updates post-deployment, which can be a manual, costly process. This paper proposes a Dynamic Safety Case Management System (DSCMS) to support both the initial creation of a safety case and its systematic, semi-automated revision over time. Drawing on methods developed in the autonomous vehicles (AV) sector - state-of-the-art Checkable Safety Arguments (CSA) combined with Safety Performance Indicators (SPIs) recommended by UL 4600, a DSCMS helps developers maintain alignment between system safety claims and the latest system state. We demonstrate this approach on a safety case template for offensive cyber capabilities and suggest ways it can be integrated into governance structures for safety-critical decision-making. While the correctness of the initial safety argument remains paramount - particularly for high-severity risks - a DSCMS provides a framework for adapting to new insights and strengthening incident response. We outline challenges and further work towards development and implementation of this approach as part of continuous safety assurance of frontier AI systems., Comment: 75 pages, 41 tables/figures

We establish the theoretical framework for implementing the maximumn entropy on the mean (MEM) method for linear inverse problems in the setting of approximate (data-driven) priors. We prove a.s. convergence for empirical means and further develop general estimates for the difference between the MEM solutions with different priors $\mu$ and $\nu$ based upon the epigraphical distance between their respective log-moment generating functions. These estimates allow us to establish a rate of convergence in expectation for empirical means. We illustrate our results with denoising on MNIST and Fashion-MNIST data sets., Comment: 25 pages, 13 figures

As a crucial step to enhance LLMs alignment with human intentions, Instruction Fine-Tuning (IFT) has a high demand on dataset quality. However, existing IFT datasets often contain knowledge that is inconsistent with LLMs' internal knowledge learned from the pre-training phase, which can greatly affect the efficacy of IFT. To address this issue, we introduce NILE (iNternal consIstency aLignmEnt) framework, aimed at optimizing IFT datasets to unlock LLMs' capability further. NILE operates by eliciting target pre-trained LLM's internal knowledge corresponding to instruction data. The internal knowledge is leveraged to revise the answer in IFT datasets. Additionally, we propose a novel Internal Consistency Filtering (ICF) method to filter training samples, ensuring its high consistency with LLM's internal knowledge. Our experiments demonstrate that NILE-aligned IFT datasets sharply boost LLM performance across multiple LLM ability evaluation datasets, achieving up to 66.6% gain on Arena-Hard and 68.5% on Alpaca-Eval V2. Further analysis confirms that each component of the NILE}framework contributes to these substantial performance improvements, and provides compelling evidence that dataset consistency with pre-trained internal knowledge is pivotal for maximizing LLM potential.

Accurate modeling of long-range forces is critical in atomistic simulations, as they play a central role in determining the properties of materials and chemical systems. However, standard machine learning interatomic potentials (MLIPs) often rely on short-range approximations, limiting their applicability to systems with significant electrostatics and dispersion forces. We recently introduced the Latent Ewald Summation (LES) method, which captures long-range electrostatics without explicitly learning atomic charges or charge equilibration. Extending LES, we incorporate the ability to learn physical partial charges, encode charge states, and the option to impose charge neutrality constraints. We benchmark LES on diverse and challenging systems, including charged molecules, ionic liquid, electrolyte solution, polar dipeptides, surface adsorption, electrolyte/solid interfaces, and solid-solid interfaces. Our results show that LES can effectively infer physical partial charges, dipole and quadrupole moments, as well as achieve better accuracy compared to methods that explicitly learn charges. LES thus provides an efficient, interpretable, and generalizable MLIP framework for simulating complex systems with intricate charge transfer and long-range

Scaling has not yet been convincingly demonstrated for pure self-supervised learning from video. However, prior work has focused evaluations on semantic-related tasks $\unicode{x2013}$ action classification, ImageNet classification, etc. In this paper we focus on evaluating self-supervised learning on non-semantic vision tasks that are more spatial (3D) and temporal (+1D = 4D), such as camera pose estimation, point and object tracking, and depth estimation. We show that by learning from very large video datasets, masked auto-encoding (MAE) with transformer video models actually scales, consistently improving performance on these 4D tasks, as model size increases from 20M all the way to the largest by far reported self-supervised video model $\unicode{x2013}$ 22B parameters. Rigorous apples-to-apples comparison with many recent image and video models demonstrates the benefits of scaling 4D representations.

Deformed droplets are ubiquitous in various industrial applications, such as inkjet printing, lab-on-a-chip devices, and spray cooling, and can fundamentally affect the involved applications both favorably and unfavorably. Here, we employ many-body dissipative particle dynamics to investigate the oscillations of water droplets on a harmonically and horizontally vibrating, solid substrate. Three distinct scenarios of oscillations as a response to the substrate vibrations have been identified. The first scenario reflects a common situation where the droplet can follow the substrate vibrations. In the other two scenarios, favored in the case of hydrophilic substrates, droplet oscillations generate high shear rates that ultimately lead to droplet breakup. Leveraging our simulation model, the properties of the droplet and the mechanisms related to the oscillations are analyzed with a molecular-level resolution, while results are also put in the perspective of experiment. Our study suggests that the three scenarios can be distinguished by the contact-surface velocity of the oscillating droplet, with threshold velocities influenced by the substrate's wettability. Moreover, the mean magnitude of the particle velocity at the contact surface plays a key role in determining the three oscillation phases, suggesting that the capillary number of the oscillating droplet governs the phase behavior. Thus, our approach aims to optimize droplet oscillations and deformations on solid substrates, which have direct implications for technological applications., Comment: 37 pages, 20 figures

We discuss a model of neutrino mass based on the type I seesaw mechanism embedded in a spontaneously broken global lepton number framework with a $Z_2$ symmetry. We show that the resulting Majoron is a viable freeze-in dark matter candidate. Two right-handed neutrinos are assumed to have dominant off-diagonal masses suggesting resonant leptogenesis as the origin of baryon asymmetry of the Universe. Explicit higher dimensional lepton number violating operators, are shown to play a crucial role in simultaneously controlling both the Majoron production in the early Universe and the right handed neutrino mass splitting relevant for resonant leptogenesis. We perform a combined analysis of Majoron dark matter and leptogenesis, discussing the relative importance of self energy and vertex contributions to CP asymmetry, and explore the parameter space, leading to an intricate relation between neutrino mass, dark matter and baryon asymmetry., Comment: 12 pages, 10 figures and 2 tables

We measured the $\beta$-delayed neutron emission from $^{25}$F for the first time at the Facility for Rare Isotope Beams (FRIB). Using combined neutron and $\gamma$-ray detector systems of the FRIB Decay Station Initiator (FDSi), we observed $\beta$-decay transitions populating neutron unbound states between 4.2 and 8 MeV in $^{25}$Ne. The experimental results led to the revision of the $\beta$-decay half-life and $\beta$-delayed neutron-emission probability of $^{25}$F. The $\beta$-decay strength distribution of $^{25}$F extracted from the data agrees with the shell-model predictions using the USDB and SDPF-M effective interactions. This result indicates that the spherical neutron $N = 16$ shell gap persists in $^{25}$F and $^{25}$Ne., Comment: 7 pages

We introduce form factors that relate the amplitude of a QED process in vacuum to its corresponding background-field process. The latter is characterised by a reduced S-matrix element where one or more photon field operators are replaced by classical background fields. In the associated Feynman diagram, external photon lines are supplanted with lines representing the c-number field. This modifies the cross section by factors proportional to powers of the Fourier amplitude of the classical field (and its complex conjugate). We demonstrate this explicitly by comparing different reaction channels of low-energy photon-photon scattering in a classical background. We find that background field cross sections typically undergo coherent enhancement and for some reaction channels display a more favourable scaling with centre-of-mass energy compared to the vacuum process. Similar coherent enhancement may be found for leading-order pair annihilation to one photon, but this competes with kinematic suppression. This suppression can be minimised by using an x-ray free electron laser as the classical background., Comment: 22 pages, 4 figures

The advent of artificial intelligence (AI) technologies has significantly changed many domains, including applied statistics. This review and vision paper explores the evolving role of applied statistics in the AI era, drawing from our experiences in engineering statistics. We begin by outlining the fundamental concepts and historical developments in applied statistics and tracing the rise of AI technologies. Subsequently, we review traditional areas of applied statistics, using examples from engineering statistics to illustrate key points. We then explore emerging areas in applied statistics, driven by recent technological advancements, highlighting examples from our recent projects. The paper discusses the symbiotic relationship between AI and applied statistics, focusing on how statistical principles can be employed to study the properties of AI models and enhance AI systems. We also examine how AI can advance applied statistics in terms of modeling and analysis. In conclusion, we reflect on the future role of statisticians. Our paper aims to shed light on the transformative impact of AI on applied statistics and inspire further exploration in this dynamic field.

Nonlinearities in King plots (KP) of isotope shifts (IS) can reveal the existence of beyond-Standard-Model (BSM) interactions that couple electrons and neutrons. However, it is crucial to distinguish higher-order Standard Model (SM) effects from BSM physics. We measure the IS of the transitions ${{}^{3}P_{0}~\rightarrow~{}^{3}P_{1}}$ in $\mathrm{Ca}^{14+}$ and ${{}^{2}S_{1/2} \rightarrow {}^{2}D_{5/2}}$ in $\mathrm{Ca}^{+}$ with sub-Hz precision as well as the nuclear mass ratios with relative uncertainties below $4\times10^{-11}$ for the five stable, even isotopes of calcium (${}^{40,42,44,46,48}\mathrm{Ca}$). Combined, these measurements yield a calcium KP nonlinearity with a significance of $\sim 900 \sigma$. Precision calculations show that the nonlinearity cannot be fully accounted for by the expected largest higher-order SM effect, the second-order mass shift, and identify the little-studied nuclear polarization as the only remaining SM contribution that may be large enough to explain it. Despite the observed nonlinearity, we improve existing KP-based constraints on a hypothetical Yukawa interaction for most of the new boson masses between $10~\mathrm{eV/c^2}$ and $10^7~\mathrm{eV/c^2}$.

Local Hamiltonian Problems (LHPs) are important problems that are computationally QMA-complete and physically relevant for many-body quantum systems. Quantum MaxCut (QMC), which equates to finding ground states of the quantum Heisenberg model, is the canonical LHP for which various algorithms have been proposed, including semidefinite programs and variational quantum algorithms. We propose and analyze a quantum approximation algorithm which we call the Hamiltonian Quantum Approximate Optimization Algorithm (HamQAOA), which builds on the well-known scheme for combinatorial optimization and is suitable for implementations on near-term hardware. We establish rigorous performance guarantees of the HamQAOA for QMC on high-girth regular graphs, and our result provides bounds on the ground energy density for quantum Heisenberg spin glasses in the infinite size limit that improve with depth. Furthermore, we develop heuristic strategies with which to efficiently obtain good HamQAOA parameters. Through numerical simulations, we show that the HamQAOA empirically outperforms prior algorithms on a wide variety of QMC instances. In particular, our results indicate that the linear-depth HamQAOA can deterministically prepare exact ground states of 1-dimensional antiferromagnetic Heisenberg spin chains described by the Bethe ansatz, in contrast to the exponential depths required in previous protocols for preparing Bethe states., Comment: 17+21 pages, 16 figures

Deep learning has recently enabled the decoding of language from the neural activity of a few participants with electrodes implanted inside their brain. However, reliably decoding words from non-invasive recordings remains an open challenge. To tackle this issue, we introduce a novel deep learning pipeline to decode individual words from non-invasive electro- (EEG) and magneto-encephalography (MEG) signals. We train and evaluate our approach on an unprecedentedly large number of participants (723) exposed to five million words either written or spoken in English, French or Dutch. Our model outperforms existing methods consistently across participants, devices, languages, and tasks, and can decode words absent from the training set. Our analyses highlight the importance of the recording device and experimental protocol: MEG and reading are easier to decode than EEG and listening, respectively, and it is preferable to collect a large amount of data per participant than to repeat stimuli across a large number of participants. Furthermore, decoding performance consistently increases with the amount of (i) data used for training and (ii) data used for averaging during testing. Finally, single-word predictions show that our model effectively relies on word semantics but also captures syntactic and surface properties such as part-of-speech, word length and even individual letters, especially in the reading condition. Overall, our findings delineate the path and remaining challenges towards building non-invasive brain decoders for natural language.

The study of uniform Tur\'an densities was initiated in the 1980s by Erd\H{o}s and S\'os. Given a $3$-graph $F$, the uniform Tur\'an density of $F$, $\pi_{\therefore}(F)$, is defined as the infimum $d\in[0,1]$ such that every $3$-graph $H$ in which every linearly sized $S\subseteq V(H)$ induces at least $(d+o(1))\binom{\vert S\vert}{3}$ edges must contain a copy of $F$. Disproving Erd\H{o}s's famous jumping conjecture, Frankl and R\"odl showed that the set of Tur\'an densities is not well-ordered. We prove an analogous result for the uniform Tur\'an density, namely that the set $\Pi^{(3)}_{\therefore,\infty}=\{\pi_{\therefore}(\mathcal{F}) : \mathcal{F}\text{ a family of }3\text{-graphs} \}$ is not well-ordered. This is a consequence of a more general result, which in particular implies that for every Lagrangian $\Lambda$ of a $3$-graph and integer $1 \leq t \leq 6$ we have $\frac{t}{6}\Lambda\in \Pi^{(3)}_{\therefore,\infty}$.

The formal sharp-interface asymptotics in a degenerate Cahn-Hilliard model for viscoelastic phase separation with cross-diffusive coupling to a bulk stress variable are shown to lead to non-local lower-order counterparts of the classical surface diffusion flow. The diffuse-interface model is a variant of the Zhou-Zhang-E model and has an Onsager gradient-flow structure with a rank-deficient mobility matrix reflecting the ODE character of stress relaxation. In the case of constant coupling, we find that the evolution of the zero level set of the order parameter approximates the so-called intermediate surface diffusion flow. For non-constant coupling functions monotonically connecting the two phases, our asymptotic analysis leads to a family of third order whose propagation operator behaves like the square root of the minus Laplace-Beltrami operator at leading order. In this case, the normal velocity of the moving sharp interface arises as the Lagrange multiplier in a constrained elliptic equation, which is at the core of our derivation. The constrained elliptic problem can be solved rigorously by a variational argument, and is shown to encode the gradient structure of the effective geometric evolution law. The asymptotics are presented for deep quench, an intermediate free boundary problem based on the double-obstacle potential.

Conventional silicon photomultipliers (SiPMs) are well established as light detectors with single-photon-detection capability and used throughout high energy physics, medical, and commercial applications. The possibility to produce single photon avalanche diodes (SPADs) in commercial CMOS processes creates the opportunity to combine a matrix of SPADs and an application-specific integrated circuit in the same die. The potential of such digital SiPMs (dSiPMs) is still being explored, while it already is an established technology in certain applications, like light detection and ranging (LiDAR). A prototype dSiPM, produced in the LFoundry 150-nm CMOS technology, was designed and tested at DESY. The dSiPM central part is a matrix of 32 by 32 pixels. Each pixel contains four SPADs, a digital front-end, and has an area of 69.6 $\times$ 76 um$^2$. The chip has four time-to-digital converters and includes further circuitry for data serialization and data links. This work focuses on the characterization of the prototype in an electron beam at the DESY II Test Beam facility, to study its capability as a tracking and timing detector for minimum ionizing particles (MIPs). The MIP detection efficiency is found to be dominated by the fill factor and on the order of 31 %. The position of the impinging MIPs can be measured with a precision of about 20 um, and the time of the interaction can be measured with a precision better than 50 ps for about 85 % of the detected events. In addition, laboratory studies on the breakdown voltage, dark count rate, and crosstalk probability, as well as the experimental methods required for the characterization of such a sensor type in a particle beam are presented., Comment: 32 pages, 18 figures

Precision radial velocity (RV) spectrographs that use adaptive optics (AO) show promise to advance telescope observing capabilities beyond those of seeing-limited designs. We are building a spectrograph for the Large Binocular Telescope (LBT) named iLocater that uses AO to inject starlight directly into single mode fibers (SMF). iLocater's first acquisition camera system (the `SX' camera), which receives light from one of the 8.4m diameter primary mirrors of the LBT, was initially installed in summer 2019 and has since been used for several commissioning runs. We present results from first-light observations that include on-sky measurements as part of commissioning activities. Imaging measurements of the bright B3IV star 2 Cygni ($V=4.98$) resulted in the direct detection of a candidate companion star at an angular separation of only $\theta = 70$ mas. Follow-up AO measurements using Keck/NIRC2 recover the candidate companion in multiple filters. An $R\approx1500$ miniature spectrograph recently installed at the LBT named ``Lili'' provides spatially resolved spectra of each binary component, indicating similar spectral types and strengthening the case for companionship. Studying the multiplicity of young runaway star systems like 2 Cygni ($36.6 \pm 0.5$ Myr) can help to understand formation mechanisms for stars that exhibit anomalous velocities through the galaxy. This on-sky demonstration illustrates the spatial resolution of the iLocater SX acquisition camera working in tandem with the LBT AO system; it further derisks a number of technical hurdles involved in combining AO with Doppler spectroscopy., Comment: Accepted to AJ

One-to-many facial identification is documented to achieve high accuracy in the case where both the probe and the gallery are "mugshot quality" images. However, an increasing number of documented instances of wrongful arrest following one-to-many facial identification have raised questions about its accuracy. Probe images used in one-to-many facial identification are often cropped from frames of surveillance video and deviate from "mugshot quality" in various ways. This paper systematically explores how the accuracy of one-to-many facial identification is degraded by the person in the probe image choosing to wear dark sunglasses. We show that sunglasses degrade accuracy for mugshot-quality images by an amount similar to strong blur or noticeably lower resolution. Further, we demonstrate that the combination of sunglasses with blur or lower resolution results in even more pronounced loss in accuracy. These results have important implications for developing objective criteria to qualify a probe image for the level of accuracy to be expected if it used for one-to-many identification. To ameliorate the accuracy degradation caused by dark sunglasses, we show that it is possible to recover about 38% of the lost accuracy by synthetically adding sunglasses to all the gallery images, without model re-training. We also show that the frequency of wearing-sunglasses images is very low in existing training sets, and that increasing the representation of wearing-sunglasses images can greatly reduce the error rate. The image set assembled for this research is available at https://cvrl.nd.edu/projects/data/ to support replication and further research., Comment: IEEE International Conference on Automatic Face and Gesture Recognition 2025

Originally formalized with symbolic representations, syntactic trees may also be effectively represented in the activations of large language models (LLMs). Indeed, a 'Structural Probe' can find a subspace of neural activations, where syntactically related words are relatively close to one-another. However, this syntactic code remains incomplete: the distance between the Structural Probe word embeddings can represent the existence but not the type and direction of syntactic relations. Here, we hypothesize that syntactic relations are, in fact, coded by the relative direction between nearby embeddings. To test this hypothesis, we introduce a 'Polar Probe' trained to read syntactic relations from both the distance and the direction between word embeddings. Our approach reveals three main findings. First, our Polar Probe successfully recovers the type and direction of syntactic relations, and substantially outperforms the Structural Probe by nearly two folds. Second, we confirm that this polar coordinate system exists in a low-dimensional subspace of the intermediate layers of many LLMs and becomes increasingly precise in the latest frontier models. Third, we demonstrate with a new benchmark that similar syntactic relations are coded similarly across the nested levels of syntactic trees. Overall, this work shows that LLMs spontaneously learn a geometry of neural activations that explicitly represents the main symbolic structures of linguistic theory.

Open-source multimodal large language models (MLLMs) have shown significant potential in a broad range of multimodal tasks. However, their reasoning capabilities remain constrained by existing instruction-tuning datasets, which were predominately repurposed from academic datasets such as VQA, AI2D, and ChartQA. These datasets target simplistic tasks, and only provide phrase-level answers without any intermediate rationales. To address these challenges, we introduce a scalable and cost-effective method to construct a large-scale multimodal instruction-tuning dataset with rich intermediate rationales designed to elicit CoT reasoning. Using only open models, we create a dataset containing 12M instruction-response pairs to cover diverse, reasoning-intensive tasks with detailed and faithful rationales. Experiments demonstrate that training MLLMs on this dataset significantly improves reasoning capabilities, achieving state-of-the-art performance on benchmarks such as MathVerse (+8.1%), MMMU-Pro (+7%), and MuirBench (+13.3%). Additionally, the model demonstrates notable improvements of up to 4% on non-reasoning-based benchmarks. Ablation studies further highlight the importance of key components, such as rewriting and self-filtering, in the dataset construction process.

Medical image reconstruction with pre-trained score-based generative models (SGMs) has advantages over other existing state-of-the-art deep-learned reconstruction methods, including improved resilience to different scanner setups and advanced image distribution modeling. SGM-based reconstruction has recently been applied to simulated positron emission tomography (PET) datasets, showing improved contrast recovery for out-of-distribution lesions relative to the state-of-the-art. However, existing methods for SGM-based reconstruction from PET data suffer from slow reconstruction, burdensome hyperparameter tuning and slice inconsistency effects (in 3D). In this work, we propose a practical methodology for fully 3D reconstruction that accelerates reconstruction and reduces the number of critical hyperparameters by matching the likelihood of an SGM's reverse diffusion process to a current iterate of the maximum-likelihood expectation maximization algorithm. Using the example of low-count reconstruction from simulated $[^{18}$F]DPA-714 datasets, we show our methodology can match or improve on the NRMSE and SSIM of existing state-of-the-art SGM-based PET reconstruction while reducing reconstruction time and the need for hyperparameter tuning. We evaluate our methodology against state-of-the-art supervised and conventional reconstruction algorithms. Finally, we demonstrate a first-ever implementation of SGM-based reconstruction for real 3D PET data, specifically $[^{18}$F]DPA-714 data, where we integrate perpendicular pre-trained SGMs to eliminate slice inconsistency issues., Comment: 11 pages, 12 figures. Submitted to Transactions on Medical Imaging

Large high-quality medical image datasets are difficult to acquire but necessary for many deep learning applications. For positron emission tomography (PET), reconstructed image quality is limited by inherent Poisson noise. We propose a novel method for synthesising diverse and realistic pseudo-PET images with improved signal-to-noise ratio. We also show how our pseudo-PET images may be exploited as a generative prior for single-subject PET image reconstruction. Firstly, we perform deep-learned deformable registration of multi-subject magnetic resonance (MR) images paired to multi-subject PET images. We then use the anatomically-learned deformation fields to transform multiple PET images to the same reference space, before averaging random subsets of the transformed multi-subject data to form a large number of varying pseudo-PET images. We observe that using MR information for registration imbues the resulting pseudo-PET images with improved anatomical detail compared to the originals. We consider applications to PET image reconstruction, by generating pseudo-PET images in the same space as the intended single-subject reconstruction and using them as training data for a diffusion model-based reconstruction method. We show visual improvement and reduced background noise in our 2D reconstructions as compared to OSEM, MAP-EM and an existing state-of-the-art diffusion model-based approach. Our method shows the potential for utilising highly subject-specific prior information within a generative reconstruction framework. Future work may compare the benefits of our approach to explicitly MR-guided reconstruction methodologies., Comment: 2 pages, 3 figures. Accepted as a poster presentation at IEEE NSS MIC RTSD 2024 (submitted May 2024; accepted July 2024; presented Nov 2024)

Score-based generative models (SGMs) have recently shown promising results for image reconstruction on simulated positron emission tomography (PET) datasets. In this work we have developed and implemented practical methodology for 3D image reconstruction with SGMs, and perform (to our knowledge) the first SGM-based reconstruction of real fully 3D PET data. We train an SGM on full-count reference brain images, and extend methodology to allow SGM-based reconstructions at very low counts (1% of original, to simulate low-dose or short-duration scanning). We then perform reconstructions for multiple independent realisations of 1% count data, allowing us to analyse the bias and variance characteristics of the method. We sample from the learned posterior distribution of the generative algorithm to calculate uncertainty images for our reconstructions. We evaluate the method's performance on real full- and low-count PET data and compare with conventional OSEM and MAP-EM baselines, showing that our SGM-based low-count reconstructions match full-dose reconstructions more closely and in a bias-variance trade-off comparison, our SGM-reconstructed images have lower variance than existing baselines. Future work will compare to supervised deep-learned methods, with other avenues for investigation including how data conditioning affects the SGM's posterior distribution and the algorithm's performance with different tracers., Comment: 2 pages, 2 figures. Accepted for oral presentation at IEEE NSS MIC RTSD 2024 (submitted May 2024; accepted July 2024; presented Nov 2024)

Artificial Intelligence (AI) has apparently become one of the most important techniques discovered by humans in history while the human brain is widely recognized as one of the most complex systems in the universe. One fundamental critical question which would affect human sustainability remains open: Will artificial intelligence (AI) evolve to surpass human intelligence in the future? This paper shows that in theory new AI twins with fresh cellular level of AI techniques for neuroscience could approximate the brain and its functioning systems (e.g. perception and cognition functions) with any expected small error and AI without restrictions could surpass human intelligence with probability one in the end. This paper indirectly proves the validity of the conjecture made by Frank Rosenblatt 70 years ago about the potential capabilities of AI, especially in the realm of artificial neural networks. Intelligence is just one of fortuitous but sophisticated creations of the nature which has not been fully discovered. Like mathematics and physics, with no restrictions artificial intelligence would lead to a new subject with its self-contained systems and principles. We anticipate that this paper opens new doors for 1) AI twins and other AI techniques to be used in cellular level of efficient neuroscience dynamic analysis, functioning analysis of the brain and brain illness solutions; 2) new worldwide collaborative scheme for interdisciplinary teams concurrently working on and modelling different types of neurons and synapses and different level of functioning subsystems of the brain with AI techniques; 3) development of low energy of AI techniques with the aid of fundamental neuroscience properties; and 4) new controllable, explainable and safe AI techniques with reasoning capabilities of discovering principles in nature., Comment: Accepted by journal Neurocomputing

A segmented-scintillator-based implantation detector was developed to study the energy distribution of beta-delayed neutrons emitted from exotic isotopes. The detector comprises a 34 $\times$ 34 YSO scintillator coupled to an 8 $\times$ 8 Position-Sensitive Photo-Multiplier Tube (PSPMT) via a tapered light guide. The detector was used at RIBF, RIKEN, for time-of-flight-based neutron spectroscopy measurement in the $^{78}$Ni region. The detector provides the position and timing resolution necessary for ion-beta correlations and ToF measurements. The detector provides a high $\sim$ 80 $\%$ beta-detection efficiency and a sub-nanosecond timing resolution. This contribution discusses the details of the design, operation, implementation, and analysis developed to obtain neutron time-of-flight spectrum and the analysis methods in the context of neutron-rich nuclei in the $^{78}$Ni region.

1. Obtaining data to train robust artificial intelligence (AI)-based models for species classification can be challenging, particularly for rare species. Data augmentation can boost classification accuracy by increasing the diversity of training data and is cheaper to obtain than expert-labelled data. However, many classic image-based augmentation techniques are not suitable for audio spectrograms. 2. We investigate two generative AI models as data augmentation tools to synthesise spectrograms and supplement audio data: Auxiliary Classifier Generative Adversarial Networks (ACGAN) and Denoising Diffusion Probabilistic Models (DDPMs). The latter performed particularly well in terms of both realism of generated spectrograms and accuracy in a resulting classification task. 3. Alongside these new approaches, we present a new audio data set of 640 hours of bird calls from wind farm sites in Ireland, approximately 800 samples of which have been labelled by experts. Wind farm data are particularly challenging for classification models given the background wind and turbine noise. 4. Training an ensemble of classification models on real and synthetic data combined gave 92.6% accuracy (and 90.5% with just the real data) when compared with highly confident BirdNET predictions. 5. Our approach can be used to augment acoustic signals for more species and other land-use types, and has the potential to bring about a step-change in our capacity to develop reliable AI-based detection of rare species. Our code is available at https://github.com/gibbona1/ SpectrogramGenAI., Comment: 18 pages, 3 tables, 5 figures

Modern vehicles equip dashcams that primarily collect visual evidence for traffic accidents. However, most of the video data collected by dashcams that is not related to traffic accidents is discarded without any use. In this paper, we present a use case for dashcam videos that aims to improve driving safety. By analyzing the real-time videos captured by dashcams, we can detect driving hazards and driver distractedness to alert the driver immediately. To that end, we design and implement a Distributed Edge-based dashcam Video Analytics system (DEVA), that analyzes dashcam videos using personal edge (mobile) devices in a vehicle. DEVA consolidates available in-vehicle edge devices to maintain the resource pool, distributes video frames for analysis to devices considering resource availability in each device, and dynamically adjusts frame rates of dashcams to control the overall workloads. The entire video analytics task is divided into multiple independent phases and executed in a pipelined manner to improve the overall frame processing throughput. We implement DEVA in an Android app and also develop a dashcam emulation app to be used in vehicles that are not equipped with dashcams. Experimental results using the apps and commercial smartphones show that DEVA can process real-time videos from two dashcams with frame rates of around 22~30 FPS per camera within 200 ms of latency, using three high-end devices., Comment: Submitted to Elsevier Internet of Things

Bird migration is an adaptive behavior ultimately aiming at optimizing survival and reproductive success. We propose an optimal switching model to study bird migration, where birds' migration behaviors are modeled as switching between different stochastic diffusion processes. For individual with perfect information, we formulate the Hamilton-Jacobi Bellman equations which are then solved numerically to obtain the expected payoff and corresponding optimal control. For individuals with partial information, we complement the dynamic programming method with stochastic simulations to study the optimal strategies and the effect of information in such a setting. Finally, we apply the model to address several specific biological questions by characterizing the optimal strategies of birds under different scenarios.

The p-type point-contact germanium (pPCGe) detectors have been widely adopted in searches for low energy physics events such as neutrinos and dark matter. This is due to their enhanced capabilities of background rejection, sensitivity at energies as low as the sub-keV range and particularly fine energy resolution. Nonetheless, the pPCGe is subject to irregular behaviour caused by surface effects for events near the passivated surface. These surface events can, in general, be distinguished from events that occur in the germanium crystal bulk by its slower pulse rise time. Unfortunately, the rise-time spectra of bulk and surface events starts to convolve with each other at sub-keV energies. In this work, we propose a novel method based on cross-correlation shape-matching combined with a low-pass filter to constrain the initial parameter estimates of the signal pulse. This improvement at the lowest level leads to a 50% reduction in computation time and refinements in the rise-time resolution, which will, in the end, enhance the overall analysis. To evaluate the performance of the method, we simulate artificial pulses that resembles bulk and surface pulses by using a programmable pulse generator module (pulser). The pulser-generated pulses are then used to examine the pulse behaviours at near-threshold energies, suggesting a roughly 70% background-leakage reduction in the bulk spectrum. Finally, the method is tested on data collected from the TEXONO experiment, where the results are consistent with our observations in pulser and demonstrated the possibility of lowering the analysis threshold by at least 10eV.

Entanglement fluctuations associated with Schr\"{o}dinger evolution of wavefunctions offer a unique perspective on various fundamental issues ranging from quantum thermalization to state preparation in quantum devices. Very recently, a subset of present authors have shown that in a class of free-fermion lattice models and interacting spin chains, entanglement dynamics enters into a new regime at long time, with entanglement probes displaying persistent temporal fluctuations, whose statistics falls into the seemingly disparate paradigm of mesoscopic fluctuations in condensed matter physics. This motivate us to revisit here entanglement dynamics of a canonical bosonic model in many-body physics, i.e., a coupled harmonic oscillator chain. We find that when the system is driven out of equilibrium, the long-time entanglement dynamics exhibits strictly the same statistical behaviors as that of free-fermion models. Specifically, irrespective of entanglement probes and microscopic parameters, the statistical distribution of entanglement fluctuations is flanked by asymmetric tails: sub-Gaussian for upward fluctuations and sub-Gamma for downward; moreover, the variance exhibits a crossover from the scaling $\sim 1/L$ to $\sim L_A^3/L^2$, as the subsystem size $L_A$ increases ($L$ the total system size). This insensitivity to the particle statistics, dubbed boson-fermion universality, is contrary to the common wisdom that statistical phenomena of many-body nature depend strongly on particle statistics. Together with our previous work, the present work indicates rich fluctuation phenomena in entanglement dynamics awaiting in-depth explorations., Comment: 18 pages, 7 figures

Ferroelectric tunnel junctions (FTJs) harness the unique combination of ferroelectricity and quantum tunneling, and thus herald new opportunities in next-generation nonvolatile memory technologies. Recent advancements in the fabrication of ultrathin heterostructures have enabled the integration of ferroelectrics with various functional materials, forming hybrid tunneling-diode junctions. These junctions benefit from the modulation of the functional layer/ferroelectric interface through ferroelectric polarization, thus enabling further modalities and functional capabilities than in addition to tunneling electroresistance. This perspective aims to provide in-depth insight into novel physical phenomena of several typical ferroelectric hybrid junctions, ranging from ferroelectric/dielectric, ferroelectric/multiferroic, ferroelectric/superconducting to ferroelectric/2D materials, and finally their expansion into the realm of ferroelectric resonant tunneling diodes (FeRTDs). This latter aspect, i.e., resonant tunneling offers a radically new approach to exploiting tunneling behavior in ferroelectric heterostructures. We discuss examples that have successfully shown room temperature ferroelectric control of parameters such as the resonant peak, tunnel current ratio at peak and negative differential resistance. We conclude the perspective by summarizing the challenges and highlighting the opportunities for the future development of hybrid FTJs with a special emphasis on a new possible type of FeRTD device. The prospects for enhanced performance and expanded functionality ignite tremendous excitement in hybrid FTJs and FeRTDs for future nanoelectronics.

On May 24th, 2023, the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), joined by the Advanced Virgo and KAGRA detectors, began the fourth observing run for a two-year-long dedicated search for gravitational waves. The LIGO Hanford and Livingston detectors have achieved an unprecedented sensitivity to gravitational waves, with an angle-averaged median range to binary neutron star mergers of 152 Mpc and 160 Mpc, and duty cycles of 65.0% and 71.2%, respectively, with a coincident duty cycle of 52.6%. The maximum range achieved by the LIGO Hanford detector is 165 Mpc and the LIGO Livingston detector 177 Mpc, both achieved during the second part of the fourth observing run. For the fourth run, the quantum-limited sensitivity of the detectors was increased significantly due to the higher intracavity power from laser system upgrades and replacement of core optics, and from the addition of a 300 m filter cavity to provide the squeezed light with a frequency-dependent squeezing angle, part of the A+ upgrade program. Altogether, the A+ upgrades led to reduced detector-wide losses for the squeezed vacuum states of light which, alongside the filter cavity, enabled broadband quantum noise reduction of up to 5.2 dB at the Hanford observatory and 6.1 dB at the Livingston observatory. Improvements to sensors and actuators as well as significant controls commissioning increased low frequency sensitivity. This paper details these instrumental upgrades, analyzes the noise sources that limit detector sensitivity, and describes the commissioning challenges of the fourth observing run., Comment: 26 pages, 18 figures

Light echoes offer a means of studying protoplanetary disks, including their geometry and composition, even when they are not spatially resolved. We present a test of this approach applied specifically to optically thick, geometrically flared disks around active stars. Here we adopt stellar parameters of an active M dwarf to calculate light echoes for disks and rings with radii that would produce time delays consistent with TESS short cadence (about 2 minutes) time bins. Our results show successful fits to disk parameters, highlighting the potential effectiveness of this method in the search for protoplanetary disks., Comment: 7 pages, 3 figures

Transitioning from quantum computation on physical qubits to quantum computation on encoded, logical qubits can improve the error rate of operations, and will be essential for realizing valuable quantum computational advantages. Using a neutral atom quantum processor with 256 qubits, each an individual Ytterbium atom, we demonstrate the entanglement of 24 logical qubits using the distance-two [[4,2,2]] code, simultaneously detecting errors and correcting for lost qubits. We also implement the Bernstein-Vazirani algorithm with up to 28 logical qubits encoded in the [[4,1,2]] code, showing better-than-physical error rates. We demonstrate fault-tolerant quantum computation in our approach, guided by the proposal of Gottesman (2016), by performing repeated loss correction for both structured and random circuits encoded in the [[4,2,2]] code. Finally, since distance-two codes can correct qubit loss, but not other errors, we show repeated loss and error correction using the distance-three [[9,1,3]] Bacon-Shor code. These results begin to clear a path for achieving scientific quantum advantage with a programmable neutral atom quantum processor., Comment: 17 pages, 16 figures

Arrays of optically trapped neutral atoms are a promising architecture for the realization of quantum computers. In order to run increasingly complex algorithms, it is advantageous to demonstrate high-fidelity and flexible gates between long-lived and highly coherent qubit states. In this work, we demonstrate a universal high-fidelity gate-set with individually controlled and parallel application of single-qubit gates and two-qubit gates operating on the ground-state nuclear spin qubit in arrays of tweezer-trapped $^{171}$Yb atoms. We utilize the long lifetime, flexible control, and high physical fidelity of our system to characterize native gates using single and two-qubit Clifford and symmetric subspace randomized benchmarking circuits with more than 200 CZ gates applied to one or two pairs of atoms. We measure our two-qubit entangling gate fidelity to be 99.72(3)% (99.40(3)%) with (without) post-selection. In addition, we introduce a simple and optimized method for calibration of multi-parameter quantum gates. These results represent important milestones towards executing complex and general quantum computation with neutral atoms.

Splenomegaly, the enlargement of the spleen, is an important clinical indicator for various associated medical conditions, such as sickle cell disease (SCD). Spleen length measured from 2D ultrasound is the most widely used metric for characterising spleen size. However, it is still considered a surrogate measure, and spleen volume remains the gold standard for assessing spleen size. Accurate spleen volume measurement typically requires 3D imaging modalities, such as computed tomography or magnetic resonance imaging, but these are not widely available, especially in the Global South which has a high prevalence of SCD. In this work, we introduce a deep learning pipeline, DeepSPV, for precise spleen volume estimation from single or dual 2D ultrasound images. The pipeline involves a segmentation network and a variational autoencoder for learning low-dimensional representations from the estimated segmentations. We investigate three approaches for spleen volume estimation and our best model achieves 86.62%/92.5% mean relative volume accuracy (MRVA) under single-view/dual-view settings, surpassing the performance of human experts. In addition, the pipeline can provide confidence intervals for the volume estimates as well as offering benefits in terms of interpretability, which further support clinicians in decision-making when identifying splenomegaly. We evaluate the full pipeline using a highly realistic synthetic dataset generated by a diffusion model, achieving an overall MRVA of 83.0% from a single 2D ultrasound image. Our proposed DeepSPV is the first work to use deep learning to estimate 3D spleen volume from 2D ultrasound images and can be seamlessly integrated into the current clinical workflow for spleen assessment., Comment: arXiv admin note: substantial text overlap with arXiv:2308.08038

We developed a shoe-mounted gait monitoring system capable of tracking up to 17 gait parameters, including gait length, step time, stride velocity, and others. The system employs a stereo camera mounted on one shoe to track a marker placed on the opposite shoe, enabling the estimation of spatial gait parameters. Additionally, a Force Sensitive Resistor (FSR) affixed to the heel of the shoe, combined with a custom-designed algorithm, is utilized to measure temporal gait parameters. Through testing on multiple participants and comparison with the gait mat, the proposed gait monitoring system exhibited notable performance, with the accuracy of all measured gait parameters exceeding 93.61%. The system also demonstrated a low drift of 4.89% during long-distance walking. A gait identification task conducted on participants using a trained Transformer model achieved 95.7% accuracy on the dataset collected by the proposed system, demonstrating that our hardware has the potential to collect long-sequence gait data suitable for integration with current Large Language Models (LLMs). The system is cost-effective, user-friendly, and well-suited for real-life measurements., Comment: 13 pages, 14 figures. This paper was submitted for publication to the IEEE Transactions on Instrumentation and Measurement

We propose to measure the beam normal single spin asymmetry in elastic scattering of transversely polarized electron from target nuclei with 12 $\leq Z \leq$ 90 at Q$^2$ = 0.0092 GeV$^2$ to study its nuclear dependence. While the theoretical calculations based on two-photon exchange suggest no nuclear dependence at this kinematics, the results of 208Pb from Jefferson Lab show a striking disagreement from both theoretical predictions and light nuclei measurements. The proposed measurements will provide new data for intermediate to heavy nuclei where no data exists for $Z \geq$ 20 in the kinematics of previous high-energy experiments. It will allow one to investigate the missing contributions that are not accounted in the current theoretical models., Comment: Submitted to Jefferson Lab PAC52

The Knowledge Graph Completion~(KGC) task aims to infer the missing entity from an incomplete triple. Existing embedding-based methods rely solely on triples in the KG, which is vulnerable to specious relation patterns and long-tail entities. On the other hand, text-based methods struggle with the semantic gap between KG triples and natural language. Apart from triples, entity contexts (e.g., labels, descriptions, aliases) also play a significant role in augmenting KGs. To address these limitations, we propose KGR3, a context-enriched framework for KGC. KGR3 is composed of three modules. Firstly, the Retrieval module gathers supporting triples from the KG, collects plausible candidate answers from a base embedding model, and retrieves context for each related entity. Then, the Reasoning module employs a large language model to generate potential answers for each query triple. Finally, the Re-ranking module combines candidate answers from the two modules mentioned above, and fine-tunes an LLM to provide the best answer. Extensive experiments on widely used datasets demonstrate that KGR3 consistently improves various KGC methods. Specifically, the best variant of KGR3 achieves absolute Hits@1 improvements of 12.3% and 5.6% on the FB15k237 and WN18RR datasets.

We demonstrate numerical refocusing in coherent confocal laser scanning microscopy based on synthetic optical holography. This physics-based approach implements a computational propagation on the complex signal recovered in synthetic holography consistent with the wave physics and the parameters of the microscope. An experimental demonstration is shown to restore an in-focus image of a test object from data acquired at several focal plane off-sets. Numerical refocusing can provide focused views on samples with large height variation with a potential application in confocal optical surface profiling., Comment: 5 pages, 4 figures. \c{opyright} 2023 Optica Publishing Group. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited

As urbanization and climate change progress, urban heat becomes a priority for climate adaptation efforts. High temperatures concentrated in urban heat can drive increased risk of heat-related death and illness as well as increased energy demand for cooling. However, estimating the effects of urban heat is an ongoing field of research typically burdened by an imprecise description of the built environment, significant computational cost, and a lack of high-resolution estimates of the impacts of climate change. Here, we present open-source, computationally efficient machine learning methods that can improve the accuracy of urban temperature estimates when compared to historical reanalysis data. These models are applied to residential buildings in Los Angeles, and we compare the energy benefits of heat mitigation strategies to the impacts of climate change. We find that cooling demand is likely to increase substantially through midcentury, but engineered high-albedo surfaces could lessen this increase by more than 50%. The corresponding increase in heating demand complicates this narrative, but total annual energy use from combined heating and cooling with electric heat pumps in the Los Angeles urban climate is shown to benefit from the engineered cooling strategies under both current and future climates.