Search

We present the measurement of the energy dependence of the boron flux in cosmic rays and its ratio to the carbon flux in an energy interval from 8.4 GeV/n to 3.8 TeV/n based on the data collected by the Calorimetric Electron Telescope (CALET) during ∼6.4 yr of operation on the International Space Station. An update of the energy spectrum of carbon is also presented with an increase in statistics over our previous measurement. The observed boron flux shows a spectral hardening at the same transition energy E_{0}∼200 GeV/n of the C spectrum, though B and C fluxes have different energy dependences. The spectral index of the B spectrum is found to be γ=-3.047±0.024 in the interval 25E200 GeV/n. The B spectrum hardens by Δγ_{B}=0.25±0.12, while the best fit value for the spectral variation of C is Δγ_{C}=0.19±0.03. The B/C flux ratio is compatible with a hardening of 0.09±0.05, though a single power-law energy dependence cannot be ruled out given the current statistical uncertainties. A break in the B/C ratio energy dependence would support the recent AMS-02 observations that secondary cosmic rays exhibit a stronger hardening than primary ones. We also perform a fit to the B/C ratio with a leaky-box model of the cosmic-ray propagation in the Galaxy in order to probe a possible residual value λ_{0} of the mean escape path length λ at high energy. We find that our B/C data are compatible with a nonzero value of λ_{0}, which can be interpreted as the column density of matter that cosmic rays cross within the acceleration region.

The ISS-based Calorimetric Electron Telescope (CALET) is directly measuring the energy spec- trum of electron+positron cosmic rays up to 20 TeV. Cosmic-ray electrons of TeV region energy are limited by energy loss to a propagation range of about 1 kpc, therefore the expected sources are a few nearby supernova remnants (SNR), with the Vela SNR dominating the spectrum. The latest spectrum measured by CALET in combination with the positron-only flux published by AMS-02 is fitted with a comprehensive model including nearby pulsars as the source of the positron excess. This model is extended to the TeV region by addition of the flux from the Vela SNR as calculated with DRAGON, with the integrated energy emitted in electron cosmic rays by the SNR as a variable scale factor. Exploring various scenarios for the time and energy dependence of the cosmic-ray release from Vela, under varied propagation conditions, best-fitting interpretations of the spectrum and upper limits on the emission of cosmic-ray electrons by Vela have been derived.

Dark count rate (DCR) increase in CMOS single-photon avalanche diodes (SPADs) exposed to a nonmonochromatic neutron source is modeled, taking into account the source spectrum and the geometry of the device under test. Experimental results from the characterization of SPADs fabricated in a 150-nm technology and irradiated with 1-MeV neutron equivalent fluences up to $10^{\textsf {11}}$ cm $^{-\textsf {2}}$ are found to be in good agreement with the theoretically calculated distribution of the nonionizing energy deposited in the device substrate.

The Calorimetric Electron Telescope (CALET), in operation on the International Space Station since 2015, collected a large sample of cosmic-ray iron over a wide energy interval. In this Letter a measurement of the iron spectrum is presented in the range of kinetic energy per nucleon from 10 GeV/n to 2.0 TeV/n allowing the inclusion of iron in the list of elements studied with unprecedented precision by space-borne instruments. The measurement is based on observations carried out from January 2016 to May 2020. The CALET instrument can identify individual nuclear species via a measurement of their electric charge with a dynamic range extending far beyond iron (up to atomic number Z=40). The energy is measured by a homogeneous calorimeter with a total equivalent thickness of 1.2 proton interaction lengths preceded by a thin (3 radiation lengths) imaging section providing tracking and energy sampling. The analysis of the data and the detailed assessment of systematic uncertainties are described and results are compared with the findings of previous experiments. The observed differential spectrum is consistent within the errors with previous experiments. In the region from 50 GeV/n to 2 TeV/n our present data are compatible with a single power law with spectral index -2.60±0.03.

The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus, which is amongst the most important constraints for a space mission. CaloCube is an homogeneous calorimeter whose basic geometry is cubic and isotropic, obtained by filling the cubic volume with small cubic scintillating crystals. In this way it is possible to detect particles arriving from every direction in space, thus maximizing the acceptance. This design summarizes a three-year R&D activity, aiming to both optimize and study the full-scale performance of the calorimeter, in the perspective of a cosmic-ray space mission, and investigate a viable technical design by means of the construction of several sizable prototypes. A large scale prototype, made of a mesh of 5x5x18 CsI(Tl) crystals, has been constructed and tested on high-energy particle beams at CERN SPS accelerator. In this paper we describe the CaloCube design and present the results relative to the response of the large scale prototype to electrons., 24 pages, 19 figures

The Calorimetric Electron Telescope (CALET), in operation on the International Space Station since 2015, collected a large sample of cosmic-ray iron over a wide energy interval. In this Letter a measurement of the iron spectrum is presented in the range of kinetic energy per nucleon from 10 GeV$/n$ to 2.0 TeV$/n$ allowing the inclusion of iron in the list of elements studied with unprecedented precision by space-borne instruments. The measurement is based on observations carried out from January 2016 to May 2020. The CALET instrument can identify individual nuclear species via a measurement of their electric charge with a dynamic range extending far beyond iron (up to atomic number $Z$ = 40). The energy is measured by a homogeneous calorimeter with a total equivalent thickness of 1.2 proton interaction lengths preceded by a thin (3 radiation lengths) imaging section providing tracking and energy sampling. The analysis of the data and the detailed assessment of systematic uncertainties are described and results are compared with the findings of previous experiments. The observed differential spectrum is consistent within the errors with previous experiments. In the region from 50 GeV$/n$ to 2 TeV$/n$ our present data are compatible with a single power law with spectral index -2.60 $\pm$ 0.03., Comment: main text: 7 pages, 4 figures; supplemental material: 10 pages, 12 figures, 1 table. arXiv admin note: text overlap with arXiv:2012.10319

In this paper, we present the measurement of the energy spectra of carbon and oxygen in cosmic rays based on observations with the Calorimetric Electron Telescope (CALET) on the International Space Station from October 2015 to October 2019. Analysis, including the detailed assessment of systematic uncertainties, and results are reported. The energy spectra are measured in kinetic energy per nucleon from 10 GeV$/n$ to 2.2 TeV$/n$ with an all-calorimetric instrument with a total thickness corresponding to 1.3 nuclear interaction length. The observed carbon and oxygen fluxes show a spectral index change of $\sim$0.15 around 200 GeV$/n$ established with a significance $>3\sigma$. They have the same energy dependence with a constant C/O flux ratio $0.911\pm 0.006$ above 25 GeV$/n$. The spectral hardening is consistent with that measured by AMS-02, but the absolute normalization of the flux is about 27% lower, though in agreement with observations from previous experiments including the PAMELA spectrometer and the calorimetric balloon-borne experiment CREAM.

A multi-messenger, space-based cosmic ray detector for gamma rays and charged particles poses several design challenges due to the different instrumental requirements for the two kind of particles. Gamma-ray detection requires layers of high Z materials for photon conversion and a tracking device with a long lever arm to achieve the necessary angular resolution to separate point sources; on the contrary, charge measurements for atomic nuclei requires a thin detector in order to avoid unwanted fragmentation, and a shallow instrument so to maximize the geometric factor. In this paper, a novel tracking approach for gamma rays which tries to reconcile these two conflicting requirements is presented. The proposal is based on the Tracker-In-Calorimeter (TIC) design that relies on a highly-segmented calorimeter to track the incident gamma ray by sampling the lateral development of the electromagnetic shower at different depths. The effectiveness of this approach has been studied with Monte Carlo simulations and has been validated with test beam data of a detector prototype., Comment: 17 pages, 8 figures, 2 tables

In this paper we present a position-sensitive detector based on the vertical integration of pairs of aligned pixels operating in Geiger-mode regime and designed for charged particle detection. This novel device exploits the coincidence between two simultaneous avalanche events to discriminate between particle-triggered detections and dark counts. This concept allows to have a reduced material budget and low power consumption in spite of a high granularity and fast timing response. A proof-of-principle prototype was designed and fabricated in a 150 nm CMOS process and vertically integrated through bump bonding. This first demonstrator has been characterized and tested with a high energy particle beams at CERN SPS/PS facilities, in different configurations, featuring a reduction of the dark-count rate (DCR) at room temperature from ∼ 100 kHz/mm 2 to about 24 Hz/mm 2 a particle detection efficiency limited only by the geometric factor. The device radiation tolerance has been investigated, via irradiation of single tiers with 10 keV X-rays up to a dose of 1 Mrad (SiO2) and with neutrons up to a fluence of 1011 cm−2. A second prototype, addressing the goal to improve the present fill-factor, has been designed, manufactured and approaches now the characterization phase. Potential applications of this sensor include high spatial resolution tracking in high-energy experiments, radiation monitoring in space and radiation imaging in nuclear medicine. A small hand-held demonstrator is under construction for radio-guided surgery.

Single-photon avalanche diodes (SPADs) fabricated using two different CMOS technologies were exposed to a neutron source up to a maximum fluence of $3\times 10^{11}\,\,1$ -MeV neutron equivalent cm−2. Significant changes in the dark count rate (DCR), with a strong dependence on the fluence and the device active area, were detected after irradiation. A model for the probability of DCR degradation, accounting for the source spectrum and the geometry of the device under test (DUT), was proposed and proved to be in good agreement with experimental data. The model may be helpful in performing worst-case analysis of SPAD-based detection systems under neutron irradiation.

In this paper, a complete optical crosstalk characterization of a Geiger-mode pixelated avalanche detector for particle tracking application is presented. The device is composed of two tiers of CMOS-integrated avalanche detectors bump bonded with pixel-level interconnects, with each layer containing a 16 $\times$ 48 detector array. On-chip coincidence detection circuits, designed to discriminate between particle-triggered detection events and dark counts, have been used to acquire direct crosstalk measurements. Crosstalk measurements as a function of excess bias voltage and distance between two different avalanche diodes is presented. The effect of substrate thickness is evaluated measuring dies with three different thicknesses: 280, 50, and 25 $\mu$ m. Experimental results confirm the role of reflected photons at the bottom surface of the device, with the silicon substrate acting as a 2-D waveguide for thinner samples. The global effect of crosstalk observed when all the pixels in the array are enabled is reported, showing a substantial increase of the Dark Count Rate (DCR) distributions. Pairs of vertically aligned unshielded pixels are employed to characterize intertier optical crosstalk.

This paper presents the first experimental demonstration of a pixelated two-layer Geiger-mode avalanche sensor designed for the direct detection of charged particles. In the proposed device, each pixel is formed by two vertically aligned avalanche detectors, exploiting the coincidence between two simultaneous avalanche events to discriminate between the detection of particles and dark counts. A 48 $\times $ 16 pixel array has been designed and fabricated in a 150-nm CMOS process and vertically integrated through bump bonding. The pixel, that includes passive quenching, comparator, and digital electronic circuits for coincidence processing and signal storage, has a size of 50 $\mu \text{m} \,\, \times $ 75 $\mu \text{m}$ and a maximum fill factor of 51.6%. The operation of the particle sensor has been validated with the measurement of dark count rate distribution at different coincidence resolution times. An average dark count rate per pixel as low as 93 mHz, corresponding to 24 Hz/mm2, was obtained at room temperature. A first sensor validation using a 90Sr $\beta $ source is presented.

A prototype of a Focused Internal Reflection Cherenkov, equipped with 16 arrays of NUV-SiPM, was tested at CERN SPS in March 2015 with beams of relativistic ions at 13, 19 and 30 GeV/n obtained from fragmentation of an Ar primary beam. The detector, designed to identify cosmic nuclei, features a Fused Silica radiator bar optically connected to a cylindrical mirror of the same material and an imaging focal plane of dimensions ∼4 cm×3 cm covered with a total of 1024 SiPM photosensors. Thanks to the outstanding performance of the SiPM arrays, the detector could be operated in photon counting mode as a fully digital device. The Cherenkov pattern was recorded together with the total number of detected photoelectrons increasing as Z 2 as a function of the atomic number Z of the beam particle. In this paper, we report on the characterization and test of the SiPM arrays and the performance of the Cherenkov prototype for the charge identification of the beam particles.

Precise measurements of the energy spectra and of the composition of cosmic rays in the PeV region could improve our knowledge regarding their origin, acceleration mechanism, propagation, and composition. At the present time, spectral measurements in this region are mainly derived from data collected by ground-based detectors, because of the very low particle rates at these energies. Unfortunately, these results are affected by the high uncertainties typical of indirect measurements, which depend on the complicated modeling of the interaction of the primary particle with the atmosphere. A space experiment dedicated to measurements in this energy region has to achieve a balance between the requirements of lightness and compactness, with that of a large acceptance to cope with the low particle rates. CaloCube is a four-year-old R&amp, D project, approved and financed by the Istituto Nazionale di Fisica Nucleare (INFN) in 2014, aiming to optimize the design of a space-borne calorimeter. The large acceptance needed is obtained by maximizing the number of entrance windows, while thanks to its homogeneity and high segmentation this new detector achieves an excellent energy resolution and an enhanced separation power between hadrons and electrons. In order to optimize detector performances with respect to the total mass of the apparatus, comparative studies on different scintillating materials, different sizes of crystals, and different spacings among them have been performed making use of MonteCarlo simulations. In parallel to simulations studies, several prototypes instrumented with CsI(Tl) (Caesium Iodide, Tallium doped) cubic crystals have been constructed and tested with particle beams. Moreover, the last development of CaloCube, the Tracker-In-Calorimeter (TIC) project, financed by the INFN in 2018, is focused on the feasibility of including several silicon layers at different depths in the calorimeter in order to reconstruct the particle direction. In fact, an important requirement for &gamma, ray astronomy is to have a good angular resolution in order to allow precise identification of astrophysical sources in space. In respect to the traditional approach of using a tracker with passive material in front of the calorimeter, the TIC solution can save a significant amount of mass budget in a space satellite experiment, which can then be exploited to improve the acceptance and the resolution of the calorimeter. In this paper, the status of the project and perspectives for future developments are presented.

The CALorimetric Electron Telescope (CALET) space experiment, which has been developed by Japan in collaboration with Italy and the United States, is a high-energy astroparticle physics mission on the International Space Station (ISS). The primary goals of the CALET mission include investigation of possible nearby sources of high-energy electrons, detailed study of galactic cosmic-ray acceleration and propagation, and search for dark matter signatures. With a long-term observation onboard the ISS, the CALET experiment measures the flux of cosmic-ray electrons (including positrons) up to 20 TeV, gamma-rays to 10 TeV, and nuclei up to 1,000 TeV based on its charge separation capability from Z = 1 to 40. Since the start of science operation in mid-October, 2015, a continuous observation has been maintained without any major interruptions. The number of triggered events over 10 GeV is nearly 20 million per month. By using the data obtained during the first two-years, here we present a summary of the CALET observations: 1) Electron+positron energy spectrum, 2) Nuclei analysis, 3) Gamma-ray observation with a characterization of the on-orbit performance. The search results for the electromagnetic counterparts of LIGO/Virgo gravitational wave events are also discussed.

Single-photon avalanche diode (SPAD) arrays fabricated in a 180-nm CMOS technology with a high-voltage option have been exposed to calibrated neutron and X-ray sources to evaluate their radiation tolerance. The technology is being investigated in view of the design of low material budget detectors for charged particle tracking based on the coincidence of the signals coming from two or more overlapping layers of SPAD sensors. Each element in the array is a monolithic detector including the processing electronics together with the diode in the same substrate. Different sensor dimensions and structures have been implemented in the test chip to thoroughly explore the technology features. This paper will present and discuss the results from the characterization, in terms of dark count rate, of SPAD arrays irradiated with X-ray doses reaching 1 Mrad(SiO2) and with neutron fluences up to $10^{11}~1$ -MeV neutron equivalent cm $^{-2}$ .

著者人数: CALET Collaboration 100名 (所属. 宇宙航空研究開発機構宇宙科学研究所(JAXA)(ISAS): 海老沢, 研; 福家, 英之; 森, 国城; 西村, 純; 高柳, 昌弘; 冨田, 洋; 上野, 史郎), Number of authors: 100 (Affiliation. Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (JAXA)(ISAS): Ebisawa, Ken; Fuke, Hideyuki; Mori, Kunishiro; Nishimura, Jun; Takayanagi, Masahiro; Tomida, Hiroshi; Ueno, Shiro), 資料番号: SA1190040000

The next generation magnetic spectrometer in space, AMS-100, is designed to have a geometrical acceptance of $100\,\mathrm{m}^2\,\mathrm{sr}$ and to be operated for at least ten years at the Sun-Earth Lagrange Point 2. Compared to existing experiments, it will improve the sensitivity for the observation of new phenomena in cosmic rays, and in particular in cosmic antimatter, by at least a factor of 1000. The magnet design is based on high temperature superconductor tapes, which allow the construction of a thin solenoid with a homogeneous magnetic field of 1 Tesla inside. The inner volume is instrumented with a silicon tracker reaching a maximum detectable rigidity of 100 TV and a calorimeter system that is 70 radiation lengths deep, equivalent to four nuclear interaction lengths, which extends the energy reach for cosmic-ray nuclei up to the PeV scale, i.e. beyond the cosmic-ray knee. Covering most of the sky continuously, AMS-100 will detect high-energy gamma rays in the calorimeter system and by pair conversion in the thin solenoid, reconstructed with excellent angular resolution in the silicon tracker., Comment: 26 pages, 15 figures, to be submitted to Nuclear Instruments and Methods in Physics Research Section A. Corresponding author: Stefan Schael

The CALorimetric Electron Telescope (CALET) space experiment, developed by Japan in collaboration with Italy and the United States, is a high-energy astroparticle physics mission installed on the International Space Station (ISS). The primary goals of the CALET mission include investigating on the possible presence of nearby sources of high-energy electrons, studying the details of galactic particle propagation and searching for dark matter signatures. During a two-year mission, extendable to five years, CALET can measure the flux of cosmic-ray electrons (including positrons) to 20 TeV, gamma-rays to 10 TeV and nuclei with Z = 1 to 40 up to 1,000 TeV. The instrument consists of two layers of segmented plastic scintillators for cosmic-ray charge identification (CHD), a 3 radiation length thick tungsten-scintillating fiber imaging calorimeter (IMC) and a 27 radiation length thick lead-tungstate calorimeter (TASC). CALET has sufficient depth, imaging capabilities and excellent energy resolution to allow for a clear separation between hadrons and electrons and between charged particles and gamma rays. The instrument was launched on August 19, 2015 to the ISS with the H-II Transfer Vehicle 5 (HTV-5) and installed on the Japanese Experiment Module-Exposed Facility (JEM-EF) on August 25. Since the start of operations in mid-October, 2015, a continuous observation has been going on mainly by triggering high energy (>10 GeV) showers without any major interruption. The number of triggered events above 10 GeV is nearly 20 million per month. By using the data obtained during the first two years, we give a summary of CALET observations: (1) Electron + Positron energy spectrum, (2) Proton and Nuclei spectrum, (3) Gamma-ray observation, with results of the performance study on orbit. We also present the results of observations of the electromagnetic counterparts to LIGO-VIRGO gravitational wave events and high-energy counterparts to GRB events measured with the CALET Gamma-ray Burst Monitor (CGBM).

The CALorimetric Electron Telescope (CALET) is a high-energy astroparticle physics space experiment installed on the International Space Station (ISS), developed and operated by Japan in collaboration with Italy and the United States. The CALET mission goals include the investigation of possible nearby sources of high-energy electrons, of the details of galactic particle acceleration and propagation, and of potential signatures of dark matter. CALET measures the cosmic-ray electron + positron flux up to 20 TeV, gamma-rays up to 10 TeV, and nuclei with Z=1 to 40 up to 1,000 TeV for the more abundant elements during a long-term observation aboard the ISS. Starting science operation in mid-October 2015, CALET performed continuous observation without major interruption with close to 20 million triggered events over 10 GeV per month. Based on the data taken during the first two-years, we present an overview of CALET observations: uses w/o major interruption 1) Electron + positron energy spectrum, 2) Nuclei analysis, 3) Gamma-ray observation including a characterization of on-orbit performance. Results of the electromagnetic counterpart search for LIGO/Virgo gravitational wave events are discussed as well., 10 pages, 10 figures, a contribution to the proceedings of 26th Extended European Cosmic Ray Symposium, 6-10 July 2018, Russia, which summarizes our recent publications such as arXiv:1712.01711, arXiv:1712.01757, arXiv:1803.05834, arXiv:1806.09728, and arXiv:1807.01435

Given the good performances in terms of geometrical acceptance and energy resolution, calorimeters are the best suited detectors to measure high energy cosmic rays directly in space. However, in order to exploit this potential, the design of calorimeters must be carefully optimized to take into account all limitations related to space missions, due mainly to the mass of the experimental apparatus. CaloCube is a three years R&D project, approved and financed by INFN in 2014, aiming to optimize the design of a space-borne calorimeter by the use of a cubic, homogeneous and isotropic geometry. In order to maximize detector performances with respect to the total mass of the apparatus, comparative studies on different scintillating materials, different sizes of crystals and different spacings among them have been performed making use of Monte Carlo simulations. In parallel to this activity, several prototypes instrumented with CsI:Tl cubic crystals have been constructed and tested with particle beams (muons, electrons, protons and ions). Both simulations and prototypes showed that the CaloCube design leads to a good particle energy resolution (< 2% for electromagnetic showers, < 40% for hadronic showers) and a good effective geometric factor (> 3:5 m2 sr for electromagnetic showers, > 2:5 m2 sr for hadronic showers). Thanks to these performances, in 5 years of operation it would be possible to measure the ux of electrons+positrons up to some tens of TeV and the uxes of protons and nuclei up to some units of PeV/nucleon, hence extending these measurements by at least one order of magnitude in energy compared to the experiments currently operating in space.

The CALorimetric Electron Telescope (CALET) is an astroparticle physics experiment installed on the International Space Station since August 2015. The CALET mission was conceived to address several outstanding questions of high-energy astroparticle physics, like indirect detection of dark matter, the origin of cosmic rays (CRs), their mechanisms of acceleration and galactic propagation, the presence of possible nearby astrophysical CR sources. That can be achieved by precise measurements of the fluxes of CR electrons and γ rays up to the unexplored region above 1 TeV, and the energy spectra and composition of CR nuclei from a few tens of GeV to hundreds of TeV. In order to perform these observations, the instrument combines a thick total absorption PWO crystal calorimeter for energy measurement, a scintillator hodoscope for charge identification and thin imaging tungsten-scintillating fiber calorimeter providing accurate particle tracking and complementary charge measurement. In this paper, we will present an overview of the main CALET results based on the data collected in the first three years of the mission.

International audience; An array of Single Photon Avalanche Diodes (SPAD), fabricated in a 180 nm CMOS technology featuring a high voltage (HV) option, has been investigated in terms of radiation tolerance, in view of the design of low material budget dual-tier detectors for charged particle tracking based on the coincidence of signals coming from pairs of vertically aligned pixels. Each pixel in the array includes both the processing electronics and the sensing element in a monolithic structure. The test vehicles were irradiated with 10 keV X-rays up to a dose of 1 Mrad (SiO 2 ) and with neutrons up to a fluence of 10 11 n eq cm −2 . A selection of the characterization results are presented together with the main features of a new large scale SPAD array to be fabricated in a 150 nm CMOS technology and ready for vertical interconnection in a dual layer structure.

著者人数: 91名(所属. 宇宙航空研究開発機構宇宙科学研究所(JAXA)(ISAS): 海老沢, 研; 福家, 英之; 森, 国城; 西村, 純; 高柳, 昌弘; 冨田, 洋; 上野, 史郎), Number of authors: 91(Affiliation. Institute of Space and Atronautical Science, Japan Aerospace Exploration Agency (JAXA)(ISAS): Ebisawa, Ken; Fuke, Hideyuki; Mori, Kunishiro; Nishimura, Jun; Takayanagi, Masahiro; Tomida, Hiroshi; Ueno, Shiro), Accepted: 2018-07-03, 資料番号: SA1180102000

著者人数: 93名(所属. 宇宙航空研究開発機構宇宙科学研究所(JAXA)(ISAS): 海老沢, 研; 福家, 英之; 森, 国城; 西村, 純; 高柳, 昌弘; 冨田, 洋; 上野, 史郎), Number of authors: 93(Affiliation. Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (JAXA)(ISAS): Ebisawa, Ken; Fuke, Hideyuki; Mori, Kunishiro; Nishimura, Jun; Takayanagi, Masahiro; Tomida, Hiroshi; Ueno, Shiro), Accepted: 2018-07-26, 資料番号: SA1180103000

著者人数: 91名（所属. 宇宙航空研究開発機構宇宙科学研究所(JAXA)(ISAS): 海老沢, 研; 福家, 英之; 森, 國城; 西村, 純; 高柳, 昌弘; 上野, 史郎), Accepted: 2018-02-26, 資料番号: SA1170331000

Experimental results obtained with a prototype of a Focused Internal Reflection Cherenkov, equipped with 16 high-granularity arrays of NUV-SiPM and tested at CERN SPS in March 2015, are discussed. The detector was exposed to relativistic ions of 13, 19 and 30 GeV/amu obtained from fragmentation of a primary Ar beam. The FDIRC included a single Fused Silica radiator bar optically connected to a cylindrical mirror and an imaging focal plane of dimensions ∼4 cm×∼3 cm, covered with a total of 1024 SiPM photosensors. It was operated in photon counting mode thanks to the excellent performance of the SiPM arrays. The complete simulation of the detector was extended to the case of a planar device with multiple bars covering a sensitive area of the order of 1 m 2 . MC simulation is performed to evaluate its expected mass resolution for the identification of cosmic isotopes of astrophysical interest as 9 Be and 10 Be at energies of several GeV/amu with the goal to extend the energy reach of the present available data.

The direct observation of high-energy cosmic rays, up to the PeV region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity, and absorption depth, with respect to the total mass of the apparatus, which is among the most important constraints for a space mission. Calocube is a homogeneous calorimeter whose basic geometry is cubic and isotropic, so as to detect particles arriving from every direction in space, thus maximizing the acceptance; granularity is obtained by filling the cubic volume with small cubic scintillating crystals. This design forms the basis of a three-year R & D activity which has been approved and financed by INFN. A comparative study of different scintillating materials has been performed. Optimal values for the size of the crystals and spacing among them have been studied. Different geometries, besides the cubic one, and the possibility to implement dual-readout techniques have been investigated. A prototype, instrumented with CsI(Tl) cubic crystals, has been constructed and tested with particle beams. An overview of the obtained results will be presented and the perspectives for future space experiments will be discussed.

International audience; In this paper, we present a two-layered silicon sensor working in Geiger-mode avalanche regime and designed for charged particle detection. Each position-sensitive element is comprised of two vertically aligned pixels, exploiting the coincidence between two simultaneous avalanche events to discriminate between particle triggers and dark counts. This approach potentially offers several advantages. First, a low material budget can be achieved thanks to the thinning of the detector down to a few tens of microns (e.g. 50 μm) as the avalanche starts in a shallow region just a few microns deep. Operation in a regime of quenched avalanche allows for an excellent timing resolution and provides an internal gain that makes a front-end amplification stage unnecessary, thus dramatically reducing the power consumption. Fine detector segmentation is possible as the (horizontal) inter-pixel cross-talk in the detection plane can be reduced to a comfortable level while the vertical cross-talk is totally eliminated using a metal light-shield layer. The detector is also insensitive to background light. A number of applications could benefit from a detector with these characteristics, including particle tracking and vertex reconstruction in particle physics experiments at accelerators and in space, as well as ionizing radiation imaging in nuclear medicine and life-sciences.

International audience; In this paper, we present the implementation and preliminary evaluation of a new type of silicon sensor for charged particle detection operated in Geiger-mode. The proposed device, formed by two vertically-aligned pixel arrays, exploits the coincidence between two simultaneous avalanche events to discriminate between particle-triggered detections and dark counts. A proof-of-concept two-layer sensor with per-pixel coincidence circuits was designed and fabricated in a 150 nm CMOS process and vertically integrated through bump bonding. The sensor includes a 48×16 pixel array with 50μm×75μm pixels. This work describes the sensor architecture and reports a selection of results from the characterization of the avalanche detectors in the two layers. Detectors with an active area of 43×45μm2 have a median dark count rate of 3 kHz at 3.3 V excess bias and a breakdown voltage non-uniformity lower than 20 mV.

CaloCube is an R&D project borne to develop a novel calorimeter design, optimized for high-energy cosmic ray measurements in space. A small prototype made of CsI(Tl) elements has been built and tested on particle beams. A final version, made of 5×5×18 crystals and with dual readout (two photodiodes for each crystal), to cover the full required dynamic range, is under construction and will be tested at CERN SPS in Summer 2016. The dual readout compensation technique were developed and the feasibility to extract ÄŒ erenkov signals from CsI crystals verified.