Search

Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the performance of lumped element resonators and transmon qubits. High aspect ratio Si-fin capacitors having widths below $300nm$ with an approximate total height of 3$\mu$m are fabricated using anisotropic wet etching of Si(110) substrates followed by aluminum metallization. The single-crystal Si capacitors are incorporated in lumped element resonators and transmons by shunting them with lithographically patterned aluminum inductors and conventional $Al/AlO_x/Al$ Josephson junctions respectively. Microwave characterization of these devices suggests state-of-the-art performance for superconducting parallel plate capacitors with low power internal quality factor of lumped element resonators greater than 500k and qubit $T_1$ times greater than 25$\mu$s. These results suggest that Si-Fins are a promising technology for applications that require low loss, compact, superconductor-based capacitors with minimal stray capacitance.

We report the formation of Mn-rich regions at the interface of Co2FexMn1-xSi thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1-2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and (3) displaces both Co and Fe indiscriminately. We also observe a Mn-depleted region in each film directly above each Mn-rich interfacial layer, roughly 3 nm in width in the x = 0 and x = 0.3 films, and 1 nm in the x = 0.7 (less Mn) film. We posit that growth energetics favor Mn diffusion to the interface even when there is no significant Ga interdiffusion into the epitaxial film. Element-specific X-ray magnetic circular dichroism (XMCD) measurements show larger Co, Fe, and Mn orbital to spin magnetic moment ratios compared to bulk values across the Co2FexMn1-xSi compositional range. The values lie between reported values for pure bulk and nanostructured Co, Fe, and Mn materials, corroborating the non-uniform, layered nature of the material on the nanoscale. Finally, SQUID magnetometry demonstrates that the films deviate from the Slater-Pauling rule for uniform films of both the expected and the measured composition. The results inform a need for care and increased scrutiny when forming Mn-based magnetic thin films on III-V semiconductors like GaAs, particularly when films are on the order of 5 nm or when interface composition is critical to spin transport or other device applications.

We report on the interplay of two uniaxial magnetic anisotropies in epitaxial Fe thin films of varying thickness grown on InAs(001) as observed in ferromagnetic resonance experiments. One anisotropy originates from the Fe/InAs interface while the other originates from in-plane shear strain resulting from the anisotropic relaxation of the Fe film. X-ray diffraction was used to measure the in-plane lattice constants of the Fe films, confirming the correlation between the onset of film relaxation and the corresponding shear strain inferred from ferromagnetic resonance data. These results are relevant for ongoing efforts to develop spintronic and quantum devices utilizing large spin-orbit coupling in III-V semiconductors., Comment: 5 figures

Bismuth (Bi) films hold potential for spintronic devices and topological one-dimensional edge transport. Large-area high-quality (111) Bi ultrathin films are grown on InSb (111)B substrates. Strong film-substrate interactions epitaxially stabilize the (111) orientation and lead to inversion symmetry breaking. We resolve the longstanding controversy over the Z_2 topological assignment of bismuth and show that the surface states are topologically trivial. Our results demonstrate that interfacial bonds prevent the semimetal-to-semiconductor transition predicted for freestanding bismuth layers, highlighting the importance of controlled functionalization and surface passivation in two-dimensional materials.

Majorana zero modes, with prospective applications in topological quantum computing, are expected to arise in superconductor/semiconductor interfaces, such as $\beta$-Sn and InSb. However, proximity to the superconductor may also adversely affect the semiconductor's local properties. A tunnel barrier inserted at the interface could resolve this issue. We assess the wide band gap semiconductor, CdTe, as a candidate material to mediate the coupling at the lattice-matched interface between $\alpha$-Sn and InSb. To this end, we use density functional theory (DFT) with Hubbard U corrections, whose values are machine-learned via Bayesian optimization (BO) [npj Computational Materials 6, 180 (2020)]. The results of DFT+U(BO) are validated against angle resolved photoemission spectroscopy (ARPES) experiments for $\alpha$-Sn and CdTe. For CdTe, the z-unfolding method [Advanced Quantum Technologies, 5, 2100033 (2022)] is used to resolve the contributions of different $k_z$ values to the ARPES. We then study the band offsets and the penetration depth of metal-induced gap states (MIGS) in bilayer interfaces of InSb/$\alpha$-Sn, InSb/CdTe, and CdTe/$\alpha$-Sn, as well as in tri-layer interfaces of InSb/CdTe/$\alpha$-Sn with increasing thickness of CdTe. We find that 16 atomic layers (3.5 nm) of CdTe can serve as a tunnel barrier, effectively shielding the InSb from MIGS from the $\alpha$-Sn. This may guide the choice of dimensions of the CdTe barrier to mediate the coupling in semiconductor-superconductor devices in future Majorana zero modes experiments.

The phenomenon of non-reciprocal critical current in a Josephson device, termed the Josephson diode effect, has garnered much recent interest. Realization of the diode effect requires inversion symmetry breaking, typically obtained by spin-orbit interactions. Here we report observation of the Josephson diode effect in a three-terminal Josephson device based upon an InAs quantum well two-dimensional electron gas proximitized by an epitaxial aluminum superconducting layer. We demonstrate that the diode efficiency in our devices can be tuned by a small out-of-plane magnetic field or by electrostatic gating. We show that the Josephson diode effect in these devices is a consequence of the artificial realization of a current-phase relation that contains higher harmonics. We also show nonlinear DC intermodulation and simultaneous two-signal rectification, enabled by the multi-terminal nature of the devices. Furthermore, we show that the diode effect is an inherent property of multi-terminal Josephson devices, establishing an immediately scalable approach by which potential applications of the Josephson diode effect can be realized, agnostic to the underlying material platform. These Josephson devices may also serve as gate-tunable building blocks in designing topologically protected qubits.

The Andreev bound state spectra of multi-terminal Josephson junctions form an artificial band structure, which is predicted to host tunable topological phases under certain conditions. However, the number of conductance modes between the terminals of multi-terminal Josephson junction must be few in order for this spectrum to be experimentally accessible. In this work we employ a quantum point contact geometry in three-terminal Josephson devices. We demonstrate independent control of conductance modes between each pair of terminals and access to the single-mode regime coexistent with the presence of superconducting coupling. These results establish a full platform on which to realize tunable Andreev bound state spectra in multi-terminal Josephson junctions., Comment: 15 pages, 4 figures

We study a Cooper-pair transistor realized by two Josephson weak links that enclose a superconducting island in an InSb-Al hybrid nanowire. When the nanowire is subject to a magnetic field, isolated subgap levels arise in the superconducting island and, due to the Coulomb blockade,mediate a supercurrent by coherent co-tunneling of Cooper pairs. We show that the supercurrent resulting from such co-tunneling events exhibits, for low to moderate magnetic fields, a phase offset that discriminates even and odd charge ground states on the superconducting island. Notably,this phase offset persists when a subgap state approaches zero energy and, based on theoretical considerations, permits parity measurements of subgap states by supercurrent interferometry. Such supercurrent parity measurements could, in a new series of experiments, provide an alternative approach for manipulating and protecting quantum information stored in the isolated subgap levels of superconducting islands.

Strong spin-orbit semiconductor nanowires coupled to a superconductor are predicted to host Majorana zero modes. Exchange (braiding) operations of Majorana modes form the logical gates of a topological quantum computer and require a network of nanowires. Here, we develop an in-plane selective-area growth technique for InSb-Al semiconductor-superconductor nanowire networks with excellent quantum transport properties. Defect-free transport channels in InSb nanowire networks are realized on insulating, but heavily mismatched InP substrates by 1) full relaxation of the lattice mismatch at the nanowire/substrate interface on a (111)B substrate orientation, 2) nucleation of a complete network from a single nucleation site, which is accomplished by optimizing the surface diffusion length of the adatoms. Essential quantum transport phenomena for topological quantum computing are demonstrated in these structures including phase-coherent transport up to 10 $\mu$m and a hard superconducting gap accompanied by 2$e$-periodic Coulomb oscillations with an Al-based Cooper pair island integrated in the nanowire network., Comment: Data repository is available at https://doi.org/10.5281/zenodo.4589484 . Author version of the text before peer review, while see DOI for the published version

We report electron transport studies on InSb-Al hybrid semiconductor-superconductor nanowire devices. Tunnelling spectroscopy is used to measure the evolution of subgap states while varying magnetic field and voltages applied to various nearby gates. At magnetic fields between 0.7 and 0.9 T, the differential conductance contains large zero bias peaks (ZBPs) whose height reaches values on the order 2e2/h. We investigate these ZBPs for large ranges of gate voltages in different devices. We discuss possible interpretations in terms of disorder-induced subgap states, Andreev bound states and Majorana zero modes., Comment: This manuscript replaces "Quantized Majorana conductance" Nature 556, 74 (2018). Technical errors in Nature 556, 74 (2018) are corrected and the original claims now have a wider interpretation. A Retraction Note (in preparation) on Nature 556, 74 (2018) will include a detailed description of errors and the corrected data analyses

As progress is made on thin-film synthesis of Heusler compounds, a more complete understanding of the surface will be required to control their properties, especially as functional heterostructures are explored. Here, the surface reconstructions of semiconducting half-Heusler NiTiSn(001), and Ni1+xTiSn(001) (x=0.0-1.0) are explored as a way to optimize growth conditions during molecular beam epitaxy. Density functional theory (DFT) calculations were carried out to guide the interpretation of the experimental results. For NiTiSn(001) a c(2x2) surface reconstruction was observed for Sn rich samples, while a (1x1) unreconstructed surface was observed for Ti-rich samples. A narrow range around 1:1:1 stoichiometry exhibited a (2x1) surface reconstruction. Electrical transport is used to relate the observed reflection high energy electron diffraction (RHEED) pattern during and after growth with carrier concentration and stoichiometry. Scanning tunneling microscopy and RHEED were used to examine surface reconstructions, the results of which are in good agreement with density functional calculations. X-ray photoelectron spectroscopy was used to determine surface termination and stoichiometry. Atomic surface models are proposed, which suggest Sn-dimers form in reconstructed Ni1+xTiSn(001) half-Heusler surfaces (x<0.25) with a transition to Ni terminated surfaces for x > 0.25.

We report on broadband ferromagnetic resonance linewidth measurements performed on epitaxial Heusler thin films. A large and anisotropic two-magnon scattering linewidth broadening is observed for measurements with the magnetization lying in the film plane, while linewidth measurements with the magnetization saturated perpendicular to the sample plane reveal low Gilbert damping constants of $(1.5\pm0.1)\times 10^{-3}$, $(1.8\pm0.2)\times 10^{-3}$, and $<8\times 10^{-4}$ for Co$_2$MnSi/MgO, Co$_2$MnAl/MgO, and Co$_2$FeAl/MgO, respectively. The in-plane measurements are fit to a model combining Gilbert and two-magnon scattering contributions to the linewidth, revealing a characteristic disorder lengthscale of 10-100 nm., Comment: 8 pages, 5 figures

Josephson junctions with three or more superconducting leads have been predicted to exhibit topological effects in the presence of few conducting modes within the interstitial normal material. Such behavior, of relevance for topologically-protected quantum bits, would lead to specific transport features measured between terminals, with topological phase transitions occurring as a function of phase and voltage bias. Although conventional, two-terminal Josephson junctions have been studied extensively, multi-terminal devices have received relatively little attention to date. Motivated in part by the possibility to ultimately observe topological phenomena in multi-terminal Josephson devices, as well as their potential for coupling gatemon qubits, here we describe the superconducting features of a top-gated mesoscopic three-terminal Josephson device. The device is based on an InAs two-dimensional electron gas (2DEG) proximitized by epitaxial aluminum. We map out the transport properties of the device as a function of bias currents, top gate voltage and magnetic field. We find a very good agreement between the zero-field experimental phase diagram and a resistively and capacitively shunted junction (RCSJ) computational model., Comment: 7 pages, 4 figures

Achieving an electrically tunable phased array optical antenna surface has been a principal challenge in the field of metasurfaces. In this letter, we demonstrate a device platform for achieving reconfigurable control over the resonant wavelength of a subwavelength optical antenna through free-carrier injection. We engineer and grow, using molecular beam epitaxy, a heterostructure of In1-xAlxAs/InAs/AlyGa1-ySb layers designed to achieve large amplitude and phase modulation of light by maximizing the refractive index change in regions of resonant field enhancement The p-i-n layers are grown on a heavily doped n-InAs layer which forms a reflecting substrate to confine the Mie resonances within the nanowires of the index tunable layers. We outline the fabrication process developed to form such tunable metasurface elements using a four-step projection lithography process and a self-aligned vertical dry etch. We experimentally demonstrate the operation of an electrically reconfigurable optical antenna element where the resonant wavelength blue shifts by 200nm only during carrier-injection. We extrapolate the experimentally measured InAs refractive index shifts to show we can achieve nearly {\pi} phase shift in a metasurface array. This solid-state device platform enables us to contact each resonant element independently to form a truly reconfigurable Fourier optical element with the promise of arbitrary control of the electromagnetic wavefront at the subwavelength scale.

We report strong electron-electron interactions in quantum wires etched from an InAs quantum well, a material known to have strong spin-orbit interactions. We find that the current through the wires as a function of the bias voltage and temperature follows the universal scaling behavior of a Tomonaga--Luttinger liquid. Using a universal scaling formula, we extract the interaction parameter and find strong electron-electron interactions, increasing as the wires become more depleted. We establish theoretically that spin-orbit interactions cause only minor modifications of the interaction parameter in this regime, indicating that genuinely strong electron-electron interactions are indeed achieved in the device. Our results suggest that etched InAs wires provide a platform with both strong electron-electron and strong spin-orbit interactions.

Near-surface InAs two-dimensional electron gas (2DEG) systems have great potential for realizing networks of multiple Majorana zero modes towards a scalable topological quantum computer. Improving mobility in the near-surface 2DEGs is beneficial for stable topological superconducting states as well as for correlation of multiple Majorana zero modes in a complex network. Here, we investigate near-surface InAs 2DEGs (13 nm away from the surface) grown on GaSb(001) substrates, whose lattice constant is closely matched to InAs, by molecular beam epitaxy. The effect of 10-nm-thick top barrier to the mobility is studied by comparing Al$_{0.9}$Ga$_{0.1}$Sb and In$_{0.75}$Ga$_{0.25}$As as a top barrier on otherwise identical InAs quantum wells grown with identical bottom barrier and buffer layers. A 3-nm-thick capping layer on Al$_{0.9}$Ga$_{0.1}$Sb top barrier also affects the 2DEG electronic transport properties by modifying scattering from 2D remote ionized impurities at the surface. The highest transport mobility of 650,000 cm$^2$/Vs with an electron density of 3.81 $\times$ 10$^{11}$ cm$^{-2}$ was observed in an InAs 2DEG with an Al$_{0.9}$Ga$_{0.1}$Sb top barrier and an In$_{0.75}$Ga$_{0.25}$As capping layer. Analysis of Shubnikov-de Haas oscillations in the high mobility sample suggests that long-range scattering, such as remote ionized impurity scattering, is the dominant scattering mechanism in the InAs 2DEGs grown on GaSb(001) substrates. In comparison to InAs quantum wells grown on lattice-mismatched InP, the ones grown on GaSb show smoother surface morphology and higher quantum mobility. However, In$_{0.75}$Ga$_{0.25}$As top barrier in InAs quantum well grown on GaSb limits the transport mobility by charged dislocations formed in it, in addition to the major contribution to scattering from the alloy scattering.

We report on the selective-area chemical beam epitaxial growth of InAs in-plane, one-dimensional (1-D) channels using patterned SiO$_{2}$-coated InP(001), InP(111)B, and InP(110) substrates to establish a scalable platform for topological superconductor networks. Top-view scanning electron micrographs show excellent surface selectivity and dependence of major facet planes on the substrate orientations and ridge directions, and the ratios of the surface energies of the major facet planes were estimated. Detailed structural properties and defects in the InAs nanowires (NWs) were characterized by transmission electron microscopic analysis of cross-sections perpendicular to the NW ridge direction and along the NW ridge direction. Electrical transport properties of the InAs NWs were investigated using Hall bars, a field effect mobility device, a quantum dot, and an Aharonov-Bohm loop device, which reflect the strong spin-orbit interaction and phase-coherent transport characteristic in the selectively grown InAs systems. This study demonstrates that selective-area chemical beam epitaxy is a scalable approach to realize semiconductor 1-D channel networks with the excellent surface selectivity and this material system is suitable for quantum transport studies.

We study the effect of external electric fields on superconductor-semiconductor coupling by measuring the electron transport in InSb semiconductor nanowires coupled to an epitaxially grown Al superconductor. We find that the gate voltage induced electric fields can greatly modify the coupling strength, which has consequences for the proximity induced superconducting gap, effective g-factor, and spin-orbit coupling, which all play a key role in understanding Majorana physics. We further show that level repulsion due to spin-orbit coupling in a finite size system can lead to seemingly stable zero bias conductance peaks, which mimic the behavior of Majorana zero modes. Our results improve the understanding of realistic Majorana nanowire systems., Comment: 10 pages, 5 figures, supplemental information as ancillary file

The number of electrons in small metallic or semiconducting islands is quantized. When tunnelling is enabled via opaque barriers this number can change by an integer. In superconductors the addition is in units of two electron charges (2e), reflecting that the Cooper pair condensate must have an even parity. This ground state (GS) is foundational for all superconducting qubit devices. Here, we study a hybrid superconducting-semiconducting island and find three typical GS evolutions in a parallel magnetic field: a robust 2e-periodic even-parity GS, a transition to a 2e-periodic odd-parity GS,and a transition from a 2e- to a 1e-periodic GS. The 2e-periodic odd-parity GS persistent in gate-voltage occurs when a spin-resolved subgap state crosses zero energy. For our 1e-periodic GSs we explicitly show the origin being a single zero-energy state gapped from the continuum, i.e. compatible with an Andreev bound states stabilized at zero energy or the presence of Majorana zero modes.

Single-crystal Heusler atomic-scale superlattices that have been predicted to exhibit perpendicular magnetic anisotropy and half-metallicity have been successfully grown by molecular beam epitaxy. Superlattices consisting of full-Heusler Co$_2$MnAl and Fe$_2$MnAl with one to three unit cell periodicity were grown on GaAs (001), MgO (001), and Cr (001)/MgO (001). Electron energy loss spectroscopy maps confirmed clearly segregated epitaxial Heusler layers with high cobalt or high iron concentrations for samples grown near room temperature on GaAs (001). Superlattice structures grown with an excess of aluminum had significantly lower thin film shape anisotropy and resulted in an out-of-plane spin reorientation transition at temperatures below 200 K for samples grown on GaAs (001). Synchrotron-based spin resolved photoemission spectroscopy found that the superlattice structure improves the Fermi level spin polarization near the X point in the bulk Brillouin zone. Stoichiometric Co$_2$MnAl terminated superlattice grown on MgO (001) had a spin polarization of 95%, while a pure Co$_2$MnAl film had a spin polarization of only 65%., Comment: 14 pages, 1 table, 6 figures

Epitaxial thin films of the substitutionally alloyed half-Heusler series CoTi$_{1-x}$Fe$_x$Sb were grown by molecular beam epitaxy on InAlAs/InP(001) substrates for concentrations 0.0$\leq$x$\leq$1.0. The influence of Fe on the structural, electronic, and magnetic properties was studied and compared to that expected from density functional theory. The films are epitaxial and single crystalline, as measured by reflection high-energy electron diffraction and X-ray diffraction. Using in-situ X-ray photoelectron spectroscopy, only small changes in the valence band are detected for x$\leq$0.5. For films with x$\geq$0.05, ferromagnetism is observed in SQUID magnetometry with a saturation magnetization that scales linearly with Fe content. A dramatic decrease in the magnetic moment per formula unit occurs when the Fe is substitutionally alloyed on the Co site indicating a strong dependence on the magnetic moment with site occupancy. A crossover from both in-plane and out-of-plane magnetic moments to only in-plane moment occurs for higher concentrations of Fe. Ferromagnetic resonance indicates a transition from weak to strong interaction with a reduction in inhomogeneous broadening as Fe content is increased. Temperature-dependent transport reveals a semiconductor to metal transition with thermally activated behavior for x$\leq$0.5. Anomalous Hall effect and large negative magnetoresistance (up to -18.5% at 100 kOe for x=0.3) are observed for higher Fe content films. Evidence of superparamagnetism for x=0.3 and x=0.2 suggests for moderate levels of Fe, demixing of the CoTi$_{1-x}$Fe$_x$Sb films into Fe rich and Fe deficient regions may be present. Atom probe tomography is used to examine the Fe distribution in a x=0.3 film. Statistical analysis reveals a nonhomogeneous distribution of Fe atoms throughout the film, which is used to explain the observed magnetic and electrical behavior.

Majorana zero-modes hold great promise for topological quantum computing. Tunnelling spectroscopy in electrical transport is the primary tool to identify the presence of Majorana zero-modes, for instance as a zero-bias peak (ZBP) in differential-conductance. The Majorana ZBP-height is predicted to be quantized at the universal conductance value of 2e2/h at zero temperature. Interestingly, this quantization is a direct consequence of the famous Majorana symmetry, 'particle equals antiparticle'. The Majorana symmetry protects the quantization against disorder, interactions, and variations in the tunnel coupling. Previous experiments, however, have shown ZBPs much smaller than 2e2/h, with a recent observation of a peak-height close to 2e2/h. Here, we report a quantized conductance plateau at 2e2/h in the zero-bias conductance measured in InSb semiconductor nanowires covered with an Al superconducting shell. Our ZBP-height remains constant despite changing parameters such as the magnetic field and tunnel coupling, i.e. a quantized conductance plateau. We distinguish this quantized Majorana peak from possible non-Majorana origins, by investigating its robustness on electric and magnetic fields as well as its temperature dependence. The observation of a quantized conductance plateau strongly supports the existence of non-Abelian Majorana zero-modes in the system, consequently paving the way for future braiding experiments., Comment: 5 figures

In an ideal InAs/GaSb bilayer of appropriate dimension in-plane electron and hole bands overlap and hybridize, and a topologically non-trivial, or quantum spin Hall (QSH) insulator, phase is predicted to exist. The in-plane dispersion's potential landscape, however, is subject to microscopic perturbations originating from material imperfections. In this work, the effect of disorder on the electronic structure of InAs/GaSb bilayers was studied by the temperature and magnetic field dependence of the resistance of a dual-gated heterostructures gate-tuned through the inverted to normal gap regimes. Conduction in the inverted (predicted topological) regime was qualitatively similar to behavior in a disordered two-dimensional system. The impact of charged impurities and interface roughness on the formation of topologically protected edge states and an insulating bulk was estimated. The experimental evidence and estimates of disorder in the potential landscape indicated the potential fluctuations in state-of-the-art films are sufficiently strong such that conduction in the predicted topological insulator (TI) regime was dominated by a symplectic metal phase rather than a TI phase. The implications are that future efforts must address disorder in this system and focus must be placed on the reduction of defects and disorder in these heterostructures if a TI regime is to be achieved., Comment: 16 pages, including 6 figures

One-dimensional (1D) electronic transport and induced superconductivity in semiconductor nano-structures are crucial ingredients to realize topological superconductivity. Our approach for topological superconductivity employs a two-dimensional electron gas (2DEG) formed by an InAs quantum well, cleanly interfaced with a superconductor (epitaxial Al). This epi-Al/InAs quantum well heterostructure is advantageous for fabricating large-scale nano-structures consisting of multiple Majorana zero modes. Here, we demonstrate building-block transport studies using a high-quality epi-Al/InAs 2DEG heterostructure, which could be put together to realize the proposed 1D nanowire-based nano-structures and 2DEG-based networks that could host multiple Majorana zero modes: 1D transport using 1) quantum point contacts and 2) gate-defined quasi-1D channels in the InAs 2DEG as well as induced superconductivity in 3) a ballistic Al-InAs 2DEG-Al Josephson junction. From 1D transport, systematic evolution of conductance plateaus in half-integer conductance quanta are observed as a result of strong spin-orbit coupling in the InAs 2DEG. Large IcRn, a product of critical current and normal state resistance from the Josephson junction, indicates that the interface between the epitaxial Al and the InAs 2DEG is highly transparent. Our results of electronic transport studies based on the 2D approach suggest that the epitaxial superconductor/2D semiconductor system is suitable for realizing large-scale nano-structures for quantum computing applications.

Semiconductor nanowires provide an ideal platform for various low-dimensional quantum devices. In particular, topological phases of matter hosting non-Abelian quasi-particles can emerge when a semiconductor nanowire with strong spin-orbit coupling is brought in contact with a superconductor. To fully exploit the potential of non-Abelian anyons for topological quantum computing, they need to be exchanged in a well-controlled braiding operation. Essential hardware for braiding is a network of single-crystalline nanowires coupled to superconducting islands. Here, we demonstrate a technique for generic bottom-up synthesis of complex quantum devices with a special focus on nanowire networks having a predefined number of superconducting islands. Structural analysis confirms the high crystalline quality of the nanowire junctions, as well as an epitaxial superconductor-semiconductor interface. Quantum transport measurements of nanowire "hashtags" reveal Aharonov-Bohm and weak-antilocalization effects, indicating a phase coherent system with strong spin-orbit coupling. In addition, a proximity-induced hard superconducting gap is demonstrated in these hybrid superconductor-semiconductor nanowires, highlighting the successful materials development necessary for a first braiding experiment. Our approach opens new avenues for the realization of epitaxial 3-dimensional quantum device architectures., Comment: data of the paper can be found at DOI: 10.5281/zenodo.4572619 or link: https://zenodo.org/record/5025868#.YbMBfi-iFHg

We investigate zero-bias conductance peaks that arise from coalescing subgap Andreev states, consistent with emerging Majorana zero modes, in hybrid semiconductor-superconductor wires defined in a two-dimensional InAs/Al heterostructure using top-down lithography and gating. The measurements indicate a hard superconducting gap, ballistic tunneling contact, and in-plane critical fields up to $3$~T. Top-down lithography allows complex geometries, branched structures, and straightforward scaling to multicomponent devices compared to structures made from assembled nanowires., Comment: Includes Supplementary Material

Fully reconfigurable metasurfaces would enable new classes of optical devices that provide unprecedented control of electromagnetic beamforms. The principal challenge for achieving reconfigurability is the need to generate large tunability of subwavelength, low-Q metasurface resonators. Here, we demonstrate large refractive index tuning can be efficiently facilitated at mid-infrared wavelengths using novel temperature-dependent control over free-carrier refraction. In doped InSb we demonstrate nearly two-fold increase in the electron effective mass leading to a positive refractive index shift ({\Delta}n>1.5) far greater than conventional thermo-optic effects. In undoped films we demonstrate more than 10-fold change in the thermal free-carrier concentration producing a near-unity negative refractive index shift. Exploiting both effects within a single resonator system, intrinsic InSb wires on a heavily doped (epsilon near zero) InSb substrate, we demonstrate dynamically tunable Mie resonances. The observed larger than line-width resonance shifts ({\Delta}{\lambda}>1.5{\mu}m) suggest new avenues for highly tunable and reconfigurable mid-infrared semiconductor metasurfaces., Comment: 24 pages

A distinguishing feature of spin accumulation in ferromagnet-semiconductor devices is precession of the non-equilibrium spin population of the semiconductor in a magnetic field. This is the basis for detection techniques such as the Hanle effect, but these approaches become less effective as the spin lifetime in the semiconductor decreases. For this reason, no electrical Hanle measurement has been demonstrated in GaAs at room temperature. We show here that by forcing the magnetization in the ferromagnet (the spin injector and detector) to precess at the ferromagnetic resonance frequency, an electrically generated spin accumulation can be detected from 30 to 300 K. At low temperatures, the distinct Larmor precession of the spin accumulation in the semiconductor can be detected by ferromagnetic resonance in an oblique field. We verify the effectiveness of this new spin detection technique by comparing the injection bias and temperature dependence of the measured spin signal to the results obtained using traditional methods. We further show that this new approach enables a measurement of short spin lifetimes (< 100 psec), a regime that is not accessible in semiconductors using traditional Hanle techniques., Comment: 4 figures

We observe a dc voltage peak at ferromagnetic resonance (FMR) in samples consisting of a single ferromagnetic (FM) layer grown epitaxially on the $\mathit{n-}$GaAs (001) surface. The FMR peak is detected as an interfacial voltage with a symmetric line shape and is present in samples based on various FM/$n$-GaAs hetrostructures, including Co$_{2}$MnSi/$n$-GaAs, Co$_{2}$FeSi/$n$-GaAs and Fe/$n$-GaAs. We show that the interface bias voltage dependence of the FMR signal is identical to that of the tunneling anisotropic magnetoresistance (TAMR) over most of the bias range. Furthermore, we show how the precessing magnetization yields a dc FMR signal through the TAMR effect and how the TAMR phenomenon can be used to predict the angular dependence of the FMR signal. This TAMR-induced FMR peak can be observed under conditions where no spin accumulation is present and no spin-polarized current flows in the semiconductor., Comment: 4 pages, 4 figures

We investigate the dynamically polarized nuclear-spin system in Fe/\emph{n}-GaAs heterostructures using the response of the electron-spin system to nuclear magnetic resonance (NMR) in lateral spin-valve devices. The hyperfine interaction is known to act more strongly on donor-bound electron states than on those in the conduction band. We provide a quantitative model of the temperature dependence of the occupation of donor sites. With this model we calculate the ratios of the hyperfine and quadrupolar nuclear relaxation rates of each isotope. For all temperatures measured, quadrupolar relaxation limits the spatial extent of nuclear spin-polarization to within a Bohr radius of the donor sites and is directly responsible for the isotope dependence of the measured NMR signal amplitude. The hyperfine interaction is also responsible for the $2\text{ kHz}$ Knight shift of the nuclear resonance frequency that is measured as a function of the electron spin accumulation. The Knight shift is shown to provide a measurement of the electron spin-polarization that agrees qualitatively with standard spin transport measurements., Comment: 7 figures - accepted for publication in Phys. Rev. B

We report on a method of quantifying spin accumulation in Co$_{2}$MnSi/$n$-GaAs and Fe/$n$-GaAs heterostructures using a non-magnetic probe. In the presence of a large non-equilibrium spin polarization, the combination of a non-constant density of states and energy-dependent conductivity generates an electromotive force (EMF). We demonstrate that this signal dephases in the presence of applied and hyperfine fields, scales quadratically with the polarization, and is comparable in magnitude to the spin-splitting. Since this spin-generated EMF depends only on experimentally accessible parameters of the bulk material, its magnitude may be used to quantify the injected spin polarization in absolute terms., Comment: 4 figures, submitted to Phys. Rev. Lett

We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits., Comment: 9 pages, 9 figures

The growth and atomic/electronic structure of molecular beam epitaxy (MBE)-grown ErAs nanoparticles and nanorods embedded within a GaAs matrix are examined for the first time via cross-sectional scanning tunneling microscopy (XSTM) and spectroscopy (XSTS). Cross sections enable the interrogation of the internal structure and are well suited for studying embedded nanostructures. The early stages of embedded ErAs nanostructure growth are examined via these techniques and compared with previous cross sectional TEM work. Tunneling spectroscopy I(V) for both ErAs nanoparticles and nanorods was also performed, demonstrating that both nanostructures are semimetallic., Comment: 18 pages, 5 figures

The atomic and electronic structures of ErAs nanoparticles embedded within a GaAs matrix are examined via cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/XSTS). The local density of states (LDOS) exhibits a finite minimum at the Fermi level demonstrating that the nanoparticles remain semimetallic despite the predictions of previous models of quantum confinement in ErAs. We also use XSTS to measure changes in the LDOS across the ErAs/GaAs interface and propose that the interface atomic structure results in electronic states that prevent the opening of a band gap., Comment: 9 pages, 3 figure