Search

The rational design of multiple metal ions into high-entropy oxide electrode material via a single-step hydrothermal process is applicable to the evolution of oxygen molecules (O2) through simple water electrolysis. Their cost-effectiveness, high performance, and durable nature are the key factors of non-precious high-entropy multiple metal-based electrocatalysts, which can be used as replaceable catalysts instead of precious ones. This article reports a low-temperature synthesis of the cauliflower-type morphology of high-entropy amorphous metal oxides, and their electrochemical performances towards the oxygen evolution reaction (OER) are investigated. The multiple metal ion (Mn2+, Fe3+, Co2+, Ni2+, Cu2+) oxide electrode material shows an acceptable oxygen evolution reaction (OER) with an overpotential of 290 mV at a current density of 10 mA cm−2 and a lower Tafel slope value of 85 mV dec−1, respectively. Moreover, the 20 h durability test with negligible change in overpotential shows the efficacy of the modified electrode material in harsh alkaline media. The observed electrochemical results towards the OER correspond to the amorphous nature of the active material that displayed a cauliflower-type morphology, having a large specific surface area (240 m2 g−1) and providing higher electrochemical active sites as well. Consequently, post-stability characterization studies (such as PXRD, FESEM, TEM, and XPS) provide more information for understanding the post-structural and morphological results of the high-entropy amorphous metal oxide. [ABSTRACT FROM AUTHOR]

Biosynthesis of monodispersed nanoparticles, along with determination of potential responsible biomolecules, is the major bottleneck in the area of bionanotechnology research. The present study focuses on an ecofriendly, ambient temperature protocol for size controlled synthesis of gold nanoparticles, using the fungus Aspergillus terreus IF0. Gold nanoparticles were formed immediately, with the addition of chloroauric acid to the aqueous fungal extract. Synthesized nanoparticles were characterized by UV-Vis spectroscopy, TEM-EDX, and XRD analysis. Particle diameter and dispersity of nanoparticles were controlled by varying the pH of the fungal extract. At pH 10, the average size of the synthesized particles was in the range of 10-19 nm. Dialysis to obtain high and lowmolecular weight fraction followed by FTIR analysis revealed that biomolecules larger than 12 kDa and having -CH, - NH, and -SH functional groups were responsible for bioreduction and stabilization. In addition, the synthesized gold nanoparticles were found to be selectively bactericidal against the pathogenic gram negative bacteria, Escherichia coli. [ABSTRACT FROM AUTHOR]

The rational design of multiple metal ions into high-entropy oxide electrode material via a single-step hydrothermal process is applicable to the evolution of oxygen molecules (O 2 ) through simple water electrolysis. Their cost-effectiveness, high performance, and durable nature are the key factors of non-precious high-entropy multiple metal-based electrocatalysts, which can be used as replaceable catalysts instead of precious ones. This article reports a low-temperature synthesis of the cauliflower-type morphology of high-entropy amorphous metal oxides, and their electrochemical performances towards the oxygen evolution reaction (OER) are investigated. The multiple metal ion (Mn 2+ , Fe 3+ , Co 2+ , Ni 2+ , Cu 2+ ) oxide electrode material shows an acceptable oxygen evolution reaction (OER) with an overpotential of 290 mV at a current density of 10 mA cm -2 and a lower Tafel slope value of 85 mV dec -1 , respectively. Moreover, the 20 h durability test with negligible change in overpotential shows the efficacy of the modified electrode material in harsh alkaline media. The observed electrochemical results towards the OER correspond to the amorphous nature of the active material that displayed a cauliflower-type morphology, having a large specific surface area (240 m 2 g -1 ) and providing higher electrochemical active sites as well. Consequently, post-stability characterization studies (such as PXRD, FESEM, TEM, and XPS) provide more information for understanding the post-structural and morphological results of the high-entropy amorphous metal oxide.

A series of experiments were carried out with three native strains of microalgae to measure growth rates, biomass, and lipid productivities. Scenedesmus sp. IMMTCC-6 had better biomass growth rate and higher lipid production. The growth, lipid accumulation, and carbon dioxide (CO2) consumption rate of Scenedesmus sp. IMMTCC-6 were tested under different NaOH concentrations in modified BBM. The algal strain showed the maximum specific growth rate (0.474/day), biomass productivity (110.9 mg l(-1) d(-1)), and CO2 consumption rate (208.4 mg l(-1) d(-1)) with an NaOH concentration of 0.005 M on the 8(th) day of cultivation. These values were 2.03-, 6.89-, and 6.88-fold more than the algal cultures grown in control conditions (having no NaOH and CO2). The CO2 fixing efficiency of the microalga with other alternative carbon sources like Na2CO3 and NaHCO3 was also investigated and compared. The optimized experimental parameters at shake-flask scale were implemented for scaling up the process in a self-engineered photobioreactor. A significant increase in lipid accumulation (14.23% to 31.74%) by the algal strain from the logarithmic to stationary phases was obtained. The algal lipids were mainly composed of C16/C18 fatty acids, and are desirable for biodiesel production. The study suggests that microalga Scenedesmus sp. IMMTCC-6 is an efficient strain for biodiesel production and CO2 biofixation using stripping solution of NaOH in a cyclic process.

A series of 3,5-(substituted)oxycarbonyl-1,4-dihydro-2,6-dimethyl-4-(substituted)pyridines (1a-j) were synthesized by Hantzsch method for pyridine synthesis. Treatment with chloroacetyl chloride produced N-(2-chloroacetyl)-3,5-(substituted)oxycarbonyl-1,4-dihydro-2,6-dimethyl-4-(substituted)pyridines (2a-e), which on further treatment with sulfanilamide resulted in 3,5-(substituted)oxycarbonyl-1,4-dihydro-2,6-dimethyl-N-[2-(4-sulfamoylphenylamino)-acetyl]-4-(substituted)pyridines (3a-e). The structures has been established on the basis of spectral (IR, 1H-NMR, mass) and elemental analysis. Compounds 1a-j and 3a-e (5 mg/kg and 10 mg/kg) were evaluated for their anticonvulsant effect against pentylenetetrazole-induced convulsions with diazepam (4 mg/kg) as the reference. Compounds 3a-e exhibited significant (p<0.01) anticonvulsant activity compared to the control.

Condensation of isatin with primary aryl amines gave a series of Schiff bases (1) which on reaction with thioglycolic acid in 1,4-dioxane afforded the formation of the corresponding 4- thiazolidinones (2). Compound 2 on condensation with substituted benzaldehydes in anhydrous sodium acetate furnished 3-aryl -5'-phenyl (substituted) spiro [3H-indole-3,2'-thiazolidines]-2-(1H), 4'(5'H)-diones (3). The latter (3) on reaction with hydrazine hydrochloride in anhydrous sodium acetate gave 3'-phenyl (substituted) -6'-aryl-2'(1H)-cis-3',3'a-dihydrospiro [3H-indole-3,5'-pyrazolo (3',4'-d)-thiazolo-2-(1H)-ones] (4). The structure has been established on the basis of spectral data. The partition coefficient for n-octanol/water solvent system and in vitro antibacterial activity of the 2'(1H)-cis-3',3'a-dihydrospiro [3H-indole-3,5'-pyrazolo (3',4'-d)-thiazolo-2-(1H)-one] derivatives have been evaluated.