Search

This review explores the intersection of bio-plausible artificial intelligence in the form of Spiking Neural Networks (SNNs) with the analog In-Memory Computing (IMC) domain, highlighting their collective potential for low-power edge computing environments. Through detailed investigation at the device, circuit, and system levels, we highlight the pivotal synergies between SNNs and IMC architectures. Additionally, we emphasize the critical need for comprehensive system-level analyses, considering the inter-dependencies between algorithms, devices, circuit & system parameters, crucial for optimal performance. An in-depth analysis leads to identification of key system-level bottlenecks arising from device limitations which can be addressed using SNN-specific algorithm-hardware co-design techniques. This review underscores the imperative for holistic device to system design space co-exploration, highlighting the critical aspects of hardware and algorithm research endeavors for low-power neuromorphic solutions., Comment: 19 Pages, 13 Figures

Due to the high computation overhead of Vision Transformers (ViTs), In-memory Computing architectures are being researched towards energy-efficient deployment in edge-computing scenarios. Prior works have proposed efficient algorithm-hardware co-design and IMC-architectural improvements to improve the energy-efficiency of IMC-implemented ViTs. However, all prior works have neglected the overhead and co-depencence of attention blocks on the accuracy-energy-delay-area of IMC-implemented ViTs. To this end, we propose TReX- an attention-reuse-driven ViT optimization framework that effectively performs attention reuse in ViT models to achieve optimal accuracy-energy-delay-area tradeoffs. TReX optimally chooses the transformer encoders for attention reuse to achieve near iso-accuracy performance while meeting the user-specified delay requirement. Based on our analysis on the Imagenet-1k dataset, we find that TReX achieves 2.3x (2.19x) EDAP reduction and 1.86x (1.79x) TOPS/mm2 improvement with ~1% accuracy drop in case of DeiT-S (LV-ViT-S) ViT models. Additionally, TReX achieves high accuracy at high EDAP reduction compared to state-of-the-art token pruning and weight sharing approaches. On NLP tasks such as CoLA, TReX leads to 2% higher non-ideal accuracy compared to baseline at 1.6x lower EDAP., Comment: 12 pages

Spiking Neural Networks (SNNs) have gained significant research attention in the last decade due to their potential to drive resource-constrained edge devices. Though existing SNN accelerators offer high efficiency in processing sparse spikes with dense weights, opportunities are less explored in SNNs with sparse weights, i.e., dual-sparsity. In this work, we study the acceleration of dual-sparse SNNs, focusing on their core operation, sparse-matrix-sparse-matrix multiplication (spMspM). We observe that naively running a dual-sparse SNN on existing spMspM accelerators designed for dual-sparse Artificial Neural Networks (ANNs) exhibits sub-optimal efficiency. The main challenge is that processing timesteps, a natural property of SNNs, introduces an extra loop to ANN spMspM, leading to longer latency and more memory traffic. To address the problem, we propose a fully temporal-parallel (FTP) dataflow, which minimizes both data movement across timesteps and the end-to-end latency of dual-sparse SNNs. To maximize the efficiency of FTP dataflow, we propose an FTP-friendly spike compression mechanism that efficiently compresses single-bit spikes and ensures contiguous memory access. We further propose an FTP-friendly inner-join circuit that can lower the cost of the expensive prefix-sum circuits with almost no throughput penalty. All the above techniques for FTP dataflow are encapsulated in LoAS, a Low-latency inference Accelerator for dual-sparse SNNs. With FTP dataflow, compression, and inner-join, running dual-sparse SNN workloads on LoAS demonstrates significant speedup (up to $8.51\times$) and energy reduction (up to $3.68\times$) compared to running it on prior dual-sparse accelerators., Comment: Accepted to MICRO 2024. Will update with the camera-ready version once ready. (Github: https://github.com/RuokaiYin/LoAS)

The attention module in vision transformers(ViTs) performs intricate spatial correlations, contributing significantly to accuracy and delay. It is thereby important to modulate the number of attentions according to the input feature complexity for optimal delay-accuracy tradeoffs. To this end, we propose PIVOT - a co-optimization framework which selectively performs attention skipping based on the input difficulty. For this, PIVOT employs a hardware-in-loop co-search to obtain optimal attention skip configurations. Evaluations on the ZCU102 MPSoC FPGA show that PIVOT achieves 2.7x lower EDP at 0.2% accuracy reduction compared to LVViT-S ViT. PIVOT also achieves 1.3% and 1.8x higher accuracy and throughput than prior works on traditional CPUs and GPUs. The PIVOT project can be found at https://github.com/Intelligent-Computing-Lab-Yale/PIVOT., Comment: Accepted to 61st ACM/IEEE Design Automation Conference (DAC '24), June 23--27, 2024, San Francisco, CA, USA (6 Pages)

Prompt-based Continual Learning (PCL) has gained considerable attention as a promising continual learning solution as it achieves state-of-the-art performance while preventing privacy violation and memory overhead issues. Nonetheless, existing PCL approaches face significant computational burdens because of two Vision Transformer (ViT) feed-forward stages; one is for the query ViT that generates a prompt query to select prompts inside a prompt pool; the other one is a backbone ViT that mixes information between selected prompts and image tokens. To address this, we introduce a one-stage PCL framework by directly using the intermediate layer's token embedding as a prompt query. This design removes the need for an additional feed-forward stage for query ViT, resulting in ~50% computational cost reduction for both training and inference with marginal accuracy drop < 1%. We further introduce a Query-Pool Regularization (QR) loss that regulates the relationship between the prompt query and the prompt pool to improve representation power. The QR loss is only applied during training time, so there is no computational overhead at inference from the QR loss. With the QR loss, our approach maintains ~ 50% computational cost reduction during inference as well as outperforms the prior two-stage PCL methods by ~1.4% on public class-incremental continual learning benchmarks including CIFAR-100, ImageNet-R, and DomainNet.

Transformers have revolutionized various real-world applications from natural language processing to computer vision. However, traditional von-Neumann computing paradigm faces memory and bandwidth limitations in accelerating transformers owing to their massive model sizes. To this end, In-memory Computing (IMC) crossbars based on Non-volatile Memories (NVMs), due to their ability to perform highly parallelized Matrix-Vector-Multiplications (MVMs) with high energy-efficiencies, have emerged as a promising solution for accelerating transformers. However, analog MVM operations in crossbars introduce non-idealities, such as stochastic read & write noise, which affect the inference accuracy of the deployed transformers. Specifically, we find pre-trained Vision Transformers (ViTs) to be vulnerable on crossbars due to the impact of write noise on the dynamically-generated Key (K) and Value (V) matrices in the attention layers, an effect not accounted for in prior studies. We, thus, propose ClipFormer, a transformation on the K and V matrices during inference, to boost the non-ideal accuracies of pre-trained ViT models. ClipFormer requires no additional hardware and training overhead and is amenable to transformers deployed on any memristive crossbar platform. Our experiments on Imagenet-1k dataset using pre-trained DeiT-S transformers, subjected to standard training and variation-aware-training, show >10-40% higher non-ideal accuracies at the high write noise regime by applying ClipFormer., Comment: 9 pages, 10 figures, 3 tables, 1 appendix

In the realm of deep neural network deployment, low-bit quantization presents a promising avenue for enhancing computational efficiency. However, it often hinges on the availability of training data to mitigate quantization errors, a significant challenge when data availability is scarce or restricted due to privacy or copyright concerns. Addressing this, we introduce GenQ, a novel approach employing an advanced Generative AI model to generate photorealistic, high-resolution synthetic data, overcoming the limitations of traditional methods that struggle to accurately mimic complex objects in extensive datasets like ImageNet. Our methodology is underscored by two robust filtering mechanisms designed to ensure the synthetic data closely aligns with the intrinsic characteristics of the actual training data. In case of limited data availability, the actual data is used to guide the synthetic data generation process, enhancing fidelity through the inversion of learnable token embeddings. Through rigorous experimentation, GenQ establishes new benchmarks in data-free and data-scarce quantization, significantly outperforming existing methods in accuracy and efficiency, thereby setting a new standard for quantization in low data regimes.

AI chips commonly employ SRAM memory as buffers for their reliability and speed, which contribute to high performance. However, SRAM is expensive and demands significant area and energy consumption. Previous studies have explored replacing SRAM with emerging technologies like non-volatile memory, which offers fast-read memory access and a small cell area. Despite these advantages, non-volatile memory's slow write memory access and high write energy consumption prevent it from surpassing SRAM performance in AI applications with extensive memory access requirements. Some research has also investigated eDRAM as an area-efficient on-chip memory with similar access times as SRAM. Still, refresh power remains a concern, leaving the trade-off between performance, area, and power consumption unresolved. To address this issue, our paper presents a novel mixed CMOS cell memory design that balances performance, area, and energy efficiency for AI memory by combining SRAM and eDRAM cells. We consider the proportion ratio of one SRAM and seven eDRAM cells in the memory to achieve area reduction using mixed CMOS cell memory. Additionally, we capitalize on the characteristics of DNN data representation and integrate asymmetric eDRAM cells to lower energy consumption. To validate our proposed MCAIMem solution, we conduct extensive simulations and benchmarking against traditional SRAM. Our results demonstrate that MCAIMem significantly outperforms these alternatives in terms of area and energy efficiency. Specifically, our MCAIMem can reduce the area by 48\% and energy consumption by 3.4$\times$ compared to SRAM designs, without incurring any accuracy loss.

Time-To-First-Spike (TTFS) coding in Spiking Neural Networks (SNNs) offers significant advantages in terms of energy efficiency, closely mimicking the behavior of biological neurons. In this work, we delve into the role of skip connections, a widely used concept in Artificial Neural Networks (ANNs), within the domain of SNNs with TTFS coding. Our focus is on two distinct types of skip connection architectures: (1) addition-based skip connections, and (2) concatenation-based skip connections. We find that addition-based skip connections introduce an additional delay in terms of spike timing. On the other hand, concatenation-based skip connections circumvent this delay but produce time gaps between after-convolution and skip connection paths, thereby restricting the effective mixing of information from these two paths. To mitigate these issues, we propose a novel approach involving a learnable delay for skip connections in the concatenation-based skip connection architecture. This approach successfully bridges the time gap between the convolutional and skip branches, facilitating improved information mixing. We conduct experiments on public datasets including MNIST and Fashion-MNIST, illustrating the advantage of the skip connection in TTFS coding architectures. Additionally, we demonstrate the applicability of TTFS coding on beyond image recognition tasks and extend it to scientific machine-learning tasks, broadening the potential uses of SNNs.

Spiking Neural Networks (SNNs) have gained attention for their energy-efficient machine learning capabilities, utilizing bio-inspired activation functions and sparse binary spike-data representations. While recent SNN algorithmic advances achieve high accuracy on large-scale computer vision tasks, their energy-efficiency claims rely on certain impractical estimation metrics. This work studies two hardware benchmarking platforms for large-scale SNN inference, namely SATA and SpikeSim. SATA is a sparsity-aware systolic-array accelerator, while SpikeSim evaluates SNNs implemented on In-Memory Computing (IMC) based analog crossbars. Using these tools, we find that the actual energy-efficiency improvements of recent SNN algorithmic works differ significantly from their estimated values due to various hardware bottlenecks. We identify and address key roadblocks to efficient SNN deployment on hardware, including repeated computations & data movements over timesteps, neuronal module overhead, and vulnerability of SNNs towards crossbar non-idealities., Comment: 5 pages

In practical cloud-edge scenarios, where a resource constrained edge performs data acquisition and a cloud system (having sufficient resources) performs inference tasks with a deep neural network (DNN), adversarial robustness is critical for reliability and ubiquitous deployment. Adversarial detection is a prime adversarial defence technique used in prior literature. However, in prior detection works, the detector is attached to the classifier model and both detector and classifier work in tandem to perform adversarial detection that requires a high computational overhead which is not available at the low-power edge. Therefore, prior works can only perform adversarial detection at the cloud and not at the edge. This means that in case of adversarial attacks, the unfavourable adversarial samples must be communicated to the cloud which leads to energy wastage at the edge device. Therefore, a low-power edge-friendly adversarial detection method is required to improve the energy efficiency of the edge and robustness of the cloud-based classifier. To this end, RobustEdge proposes Quantization-enabled Energy Separation (QES) training with "early detection and exit" to perform edge-based low cost adversarial detection. The QES-trained detector implemented at the edge blocks adversarial data transmission to the classifier model, thereby improving adversarial robustness and energy-efficiency of the Cloud-Edge system., Comment: IEEE Transactions on Emerging Topics in Computational Intelligence (TETCI)

We introduce a method to convert Physics-Informed Neural Networks (PINNs), commonly used in scientific machine learning, to Spiking Neural Networks (SNNs), which are expected to have higher energy efficiency compared to traditional Artificial Neural Networks (ANNs). We first extend the calibration technique of SNNs to arbitrary activation functions beyond ReLU, making it more versatile, and we prove a theorem that ensures the effectiveness of the calibration. We successfully convert PINNs to SNNs, enabling computational efficiency for diverse regression tasks in solving multiple differential equations, including the unsteady Navier-Stokes equations. We demonstrate great gains in terms of overall efficiency, including Separable PINNs (SPINNs), which accelerate the training process. Overall, this is the first work of this kind and the proposed method achieves relatively good accuracy with low spike rates.

Today, there are a plethora of In-Memory Computing (IMC) devices- SRAMs, PCMs & FeFETs, that emulate convolutions on crossbar-arrays with high throughput. Each IMC device offers its own pros & cons during inference of Deep Neural Networks (DNNs) on crossbars in terms of area overhead, programming energy and non-idealities. A design-space exploration is, therefore, imperative to derive a hybrid-device architecture optimized for accurate DNN inference under the impact of non-idealities from multiple devices, while maintaining competitive area & energy-efficiencies. We propose a two-phase search framework (HyDe) that exploits the best of all worlds offered by multiple devices to determine an optimal hybrid-device architecture for a given DNN topology. Our hybrid models achieve upto 2.30-2.74x higher TOPS/mm^2 at 22-26% higher energy-efficiencies than baseline homogeneous models for a VGG16 DNN topology. We further propose a feasible implementation of the HyDe-derived hybrid-device architectures in the 2.5D design space using chiplets to reduce design effort and cost in the hardware fabrication involving multiple technology processes., Comment: Accepted to IEEE Journal on Emerging and Selected Topics in Circuits and Systems (JETCAS)

In-Memory Computing (IMC) platforms such as analog crossbars are gaining focus as they facilitate the acceleration of low-precision Deep Neural Networks (DNNs) with high area- & compute-efficiencies. However, the intrinsic non-idealities in crossbars, which are often non-deterministic and non-linear, degrade the performance of the deployed DNNs. In addition to quantization errors, most frequently encountered non-idealities during inference include crossbar circuit-level parasitic resistances and device-level non-idealities such as stochastic read noise and temporal drift. In this work, our goal is to closely examine the distortions caused by these non-idealities on the dot-product operations in analog crossbars and explore the feasibility of a nearly training-less solution via crossbar-aware fine-tuning of batchnorm parameters in real-time to mitigate the impact of the non-idealities. This enables reduction in hardware costs in terms of memory and training energy for IMC noise-aware retraining of the DNN weights on crossbars., Comment: Accepted in Great Lakes Symposium on VLSI 2023 (GLSVLSI 2023) conference

Spiking Neural Networks (SNNs) have gained increasing attention as energy-efficient neural networks owing to their binary and asynchronous computation. However, their non-linear activation, that is Leaky-Integrate-and-Fire (LIF) neuron, requires additional memory to store a membrane voltage to capture the temporal dynamics of spikes. Although the required memory cost for LIF neurons significantly increases as the input dimension goes larger, a technique to reduce memory for LIF neurons has not been explored so far. To address this, we propose a simple and effective solution, EfficientLIF-Net, which shares the LIF neurons across different layers and channels. Our EfficientLIF-Net achieves comparable accuracy with the standard SNNs while bringing up to ~4.3X forward memory efficiency and ~21.9X backward memory efficiency for LIF neurons. We conduct experiments on various datasets including CIFAR10, CIFAR100, TinyImageNet, ImageNet-100, and N-Caltech101. Furthermore, we show that our approach also offers advantages on Human Activity Recognition (HAR) datasets, which heavily rely on temporal information.

Spiking Neural Networks (SNNs) have recently attracted widespread research interest as an efficient alternative to traditional Artificial Neural Networks (ANNs) because of their capability to process sparse and binary spike information and avoid expensive multiplication operations. Although the efficiency of SNNs can be realized on the In-Memory Computing (IMC) architecture, we show that the energy cost and latency of SNNs scale linearly with the number of timesteps used on IMC hardware. Therefore, in order to maximize the efficiency of SNNs, we propose input-aware Dynamic Timestep SNN (DT-SNN), a novel algorithmic solution to dynamically determine the number of timesteps during inference on an input-dependent basis. By calculating the entropy of the accumulated output after each timestep, we can compare it to a predefined threshold and decide if the information processed at the current timestep is sufficient for a confident prediction. We deploy DT-SNN on an IMC architecture and show that it incurs negligible computational overhead. We demonstrate that our method only uses 1.46 average timesteps to achieve the accuracy of a 4-timestep static SNN while reducing the energy-delay-product by 80%., Comment: Published at Design & Automation Conferences (DAC) 2023

Due to increasing interest in adapting models on resource-constrained edges, parameter-efficient transfer learning has been widely explored. Among various methods, Visual Prompt Tuning (VPT), prepending learnable prompts to input space, shows competitive fine-tuning performance compared to training of full network parameters. However, VPT increases the number of input tokens, resulting in additional computational overhead. In this paper, we analyze the impact of the number of prompts on fine-tuning performance and self-attention operation in a vision transformer architecture. Through theoretical and empirical analysis we show that adding more prompts does not lead to linear performance improvement. Further, we propose a Prompt Condensation (PC) technique that aims to prevent performance degradation from using a small number of prompts. We validate our methods on FGVC and VTAB-1k tasks and show that our approach reduces the number of prompts by ~70% while maintaining accuracy.

We propose Multiplier-less INTeger (MINT) quantization, a uniform quantization scheme that efficiently compresses weights and membrane potentials in spiking neural networks (SNNs). Unlike previous SNN quantization methods, MINT quantizes memory-intensive membrane potentials to an extremely low precision (2-bit), significantly reducing the memory footprint. MINT also shares the quantization scaling factor between weights and membrane potentials, eliminating the need for multipliers required in conventional uniform quantization. Experimental results show that our method matches the accuracy of full-precision models and other state-of-the-art SNN quantization techniques while surpassing them in memory footprint reduction and hardware cost efficiency at deployment. For example, 2-bit MINT VGG-16 achieves 90.6% accuracy on CIFAR-10, with roughly 93.8% reduction in memory footprint from the full-precision model and 90% reduction in computation energy compared to vanilla uniform quantization at deployment. The code is available at https://github.com/Intelligent-Computing-Lab-Yale/MINT-Quantization., Comment: 6 pages. Accepted to 29th Asia and South Pacific Design Automation Conference (ASP-DAC 2024), nominated for best paper award

Federated Learning (FL) is a privacy-preserving distributed machine learning approach geared towards applications in edge devices. However, the problem of designing custom neural architectures in federated environments is not tackled from the perspective of overall system efficiency. In this paper, we propose DC-NAS -- a divide-and-conquer approach that performs supernet-based Neural Architecture Search (NAS) in a federated system by systematically sampling the search space. We propose a novel diversified sampling strategy that balances exploration and exploitation of the search space by initially maximizing the distance between the samples and progressively shrinking this distance as the training progresses. We then perform channel pruning to reduce the training complexity at the devices further. We show that our approach outperforms several sampling strategies including Hadamard sampling, where the samples are maximally separated. We evaluate our method on the CIFAR10, CIFAR100, EMNIST, and TinyImagenet benchmarks and show a comprehensive analysis of different aspects of federated learning such as scalability, and non-IID data. DC-NAS achieves near iso-accuracy as compared to full-scale federated NAS with 50% fewer resources.

Spiking Neural Networks (SNNs) are recognized as the candidate for the next-generation neural networks due to their bio-plausibility and energy efficiency. Recently, researchers have demonstrated that SNNs are able to achieve nearly state-of-the-art performance in image recognition tasks using surrogate gradient training. However, some essential questions exist pertaining to SNNs that are little studied: Do SNNs trained with surrogate gradient learn different representations from traditional Artificial Neural Networks (ANNs)? Does the time dimension in SNNs provide unique representation power? In this paper, we aim to answer these questions by conducting a representation similarity analysis between SNNs and ANNs using Centered Kernel Alignment (CKA). We start by analyzing the spatial dimension of the networks, including both the width and the depth. Furthermore, our analysis of residual connections shows that SNNs learn a periodic pattern, which rectifies the representations in SNNs to be ANN-like. We additionally investigate the effect of the time dimension on SNN representation, finding that deeper layers encourage more dynamics along the time dimension. We also investigate the impact of input data such as event-stream data and adversarial attacks. Our work uncovers a host of new findings of representations in SNNs. We hope this work will inspire future research to fully comprehend the representation power of SNNs. Code is released at https://github.com/Intelligent-Computing-Lab-Yale/SNNCKA., Comment: Published in Transactions on Machine Learning Research (TMLR)

Neuromorphic computing shows promise for advancing computing efficiency and capabilities of AI applications using brain-inspired principles. However, the neuromorphic research field currently lacks standardized benchmarks, making it difficult to accurately measure technological advancements, compare performance with conventional methods, and identify promising future research directions. Prior neuromorphic computing benchmark efforts have not seen widespread adoption due to a lack of inclusive, actionable, and iterative benchmark design and guidelines. To address these shortcomings, we present NeuroBench: a benchmark framework for neuromorphic computing algorithms and systems. NeuroBench is a collaboratively-designed effort from an open community of nearly 100 co-authors across over 50 institutions in industry and academia, aiming to provide a representative structure for standardizing the evaluation of neuromorphic approaches. The NeuroBench framework introduces a common set of tools and systematic methodology for inclusive benchmark measurement, delivering an objective reference framework for quantifying neuromorphic approaches in both hardware-independent (algorithm track) and hardware-dependent (system track) settings. In this article, we present initial performance baselines across various model architectures on the algorithm track and outline the system track benchmark tasks and guidelines. NeuroBench is intended to continually expand its benchmarks and features to foster and track the progress made by the research community., Comment: Updated from whitepaper to full perspective article preprint

Spiking Neural Networks (SNNs) have recently become more popular as a biologically plausible substitute for traditional Artificial Neural Networks (ANNs). SNNs are cost-efficient and deployment-friendly because they process input in both spatial and temporal manner using binary spikes. However, we observe that the information capacity in SNNs is affected by the number of timesteps, leading to an accuracy-efficiency tradeoff. In this work, we study a fine-grained adjustment of the number of timesteps in SNNs. Specifically, we treat the number of timesteps as a variable conditioned on different input samples to reduce redundant timesteps for certain data. We call our method Spiking Early-Exit Neural Networks (SEENNs). To determine the appropriate number of timesteps, we propose SEENN-I which uses a confidence score thresholding to filter out the uncertain predictions, and SEENN-II which determines the number of timesteps by reinforcement learning. Moreover, we demonstrate that SEENN is compatible with both the directly trained SNN and the ANN-SNN conversion. By dynamically adjusting the number of timesteps, our SEENN achieves a remarkable reduction in the average number of timesteps during inference. For example, our SEENN-II ResNet-19 can achieve 96.1% accuracy with an average of 1.08 timesteps on the CIFAR-10 test dataset. Code is shared at https://github.com/Intelligent-Computing-Lab-Yale/SEENN., Comment: NeurIPS 2023

The hardware-efficiency and accuracy of Deep Neural Networks (DNNs) implemented on In-memory Computing (IMC) architectures primarily depend on the DNN architecture and the peripheral circuit parameters. It is therefore essential to holistically co-search the network and peripheral parameters to achieve optimal performance. To this end, we propose XPert, which co-searches network architecture in tandem with peripheral parameters such as the type and precision of analog-to-digital converters, crossbar column sharing and the layer-specific input precision using an optimization-based design space exploration. Compared to VGG16 baselines, XPert achieves 10.24x (4.7x) lower EDAP, 1.72x (1.62x) higher TOPS/W,1.93x (3x) higher TOPS/mm2 at 92.46% (56.7%) accuracy for CIFAR10 (TinyImagenet) datasets. The code for this paper is available at https://github.com/Intelligent-Computing-Lab-Yale/XPert., Comment: Accepted to Design and Automation Conference (DAC)

Compute In-Memory platforms such as memristive crossbars are gaining focus as they facilitate acceleration of Deep Neural Networks (DNNs) with high area and compute-efficiencies. However, the intrinsic non-idealities associated with the analog nature of computing in crossbars limits the performance of the deployed DNNs. Furthermore, DNNs are shown to be vulnerable to adversarial attacks leading to severe security threats in their large-scale deployment. Thus, finding adversarially robust DNN architectures for non-ideal crossbars is critical to the safe and secure deployment of DNNs on the edge. This work proposes a two-phase algorithm-hardware co-optimization approach called XploreNAS that searches for hardware-efficient & adversarially robust neural architectures for non-ideal crossbar platforms. We use the one-shot Neural Architecture Search (NAS) approach to train a large Supernet with crossbar-awareness and sample adversarially robust Subnets therefrom, maintaining competitive hardware-efficiency. Our experiments on crossbars with benchmark datasets (SVHN, CIFAR10 & CIFAR100) show upto ~8-16% improvement in the adversarial robustness of the searched Subnets against a baseline ResNet-18 model subjected to crossbar-aware adversarial training. We benchmark our robust Subnets for Energy-Delay-Area-Products (EDAPs) using the Neurosim tool and find that with additional hardware-efficiency driven optimizations, the Subnets attain ~1.5-1.6x lower EDAPs than ResNet-18 baseline., Comment: Accepted to ACM Transactions on Embedded Computing Systems in April 2023

Pruning for Spiking Neural Networks (SNNs) has emerged as a fundamental methodology for deploying deep SNNs on resource-constrained edge devices. Though the existing pruning methods can provide extremely high weight sparsity for deep SNNs, the high weight sparsity brings a workload imbalance problem. Specifically, the workload imbalance happens when a different number of non-zero weights are assigned to hardware units running in parallel. This results in low hardware utilization and thus imposes longer latency and higher energy costs. In preliminary experiments, we show that sparse SNNs (~98% weight sparsity) can suffer as low as ~59% utilization. To alleviate the workload imbalance problem, we propose u-Ticket, where we monitor and adjust the weight connections of the SNN during Lottery Ticket Hypothesis (LTH) based pruning, thus guaranteeing the final ticket gets optimal utilization when deployed onto the hardware. Experiments indicate that our u-Ticket can guarantee up to 100% hardware utilization, thus reducing up to 76.9% latency and 63.8% energy cost compared to the non-utilization-aware LTH method., Comment: 11 pages. Accepted to IEEE Transactions on Emerging Topics in Computational Intelligence (2024)

With ever increasing depth and width in deep neural networks to achieve state-of-the-art performance, deep learning computation has significantly grown, and dot-products remain dominant in overall computation time. Most prior works are built on conventional dot-product where weighted input summation is used to represent the neuron operation. However, another implementation of dot-product based on the notion of angles and magnitudes in the Euclidean space has attracted limited attention. This paper proposes DeepCAM, an inference accelerator built on two critical innovations to alleviate the computation time bottleneck of convolutional neural networks. The first innovation is an approximate dot-product built on computations in the Euclidean space that can replace addition and multiplication with simple bit-wise operations. The second innovation is a dynamic size content addressable memory-based (CAM-based) accelerator to perform bit-wise operations and accelerate the CNNs with a lower computation time. Our experiments on benchmark image recognition datasets demonstrate that DeepCAM is up to 523x and 3498x faster than Eyeriss and traditional CPUs like Intel Skylake, respectively. Furthermore, the energy consumed by our DeepCAM approach is 2.16x to 109x less compared to Eyeriss., Comment: Accepted to Design, Automation and Test in Europe (DATE) Conference, 2023

Most existing Spiking Neural Network (SNN) works state that SNNs may utilize temporal information dynamics of spikes. However, an explicit analysis of temporal information dynamics is still missing. In this paper, we ask several important questions for providing a fundamental understanding of SNNs: What are temporal information dynamics inside SNNs? How can we measure the temporal information dynamics? How do the temporal information dynamics affect the overall learning performance? To answer these questions, we estimate the Fisher Information of the weights to measure the distribution of temporal information during training in an empirical manner. Surprisingly, as training goes on, Fisher information starts to concentrate in the early timesteps. After training, we observe that information becomes highly concentrated in earlier few timesteps, a phenomenon we refer to as temporal information concentration. We observe that the temporal information concentration phenomenon is a common learning feature of SNNs by conducting extensive experiments on various configurations such as architecture, dataset, optimization strategy, time constant, and timesteps. Furthermore, to reveal how temporal information concentration affects the performance of SNNs, we design a loss function to change the trend of temporal information. We find that temporal information concentration is crucial to building a robust SNN but has little effect on classification accuracy. Finally, we propose an efficient iterative pruning method based on our observation on temporal information concentration. Code is available at https://github.com/Intelligent-Computing-Lab-Yale/Exploring-Temporal-Information-Dynamics-in-Spiking-Neural-Networks., Comment: Accepted to AAAI2023

We study the Human Activity Recognition (HAR) task, which predicts user daily activity based on time series data from wearable sensors. Recently, researchers use end-to-end Artificial Neural Networks (ANNs) to extract the features and perform classification in HAR. However, ANNs pose a huge computation burden on wearable devices and lack temporal feature extraction. In this work, we leverage Spiking Neural Networks (SNNs)--an architecture inspired by biological neurons--to HAR tasks. SNNs allow spatio-temporal extraction of features and enjoy low-power computation with binary spikes. We conduct extensive experiments on three HAR datasets with SNNs, demonstrating that SNNs are on par with ANNs in terms of accuracy while reducing up to 94% energy consumption. The code is publicly available in https://github.com/Intelligent-Computing-Lab-Yale/SNN_HAR, Comment: Workshop on Learning from Time Series for Health

SNNs are an active research domain towards energy efficient machine intelligence. Compared to conventional ANNs, SNNs use temporal spike data and bio-plausible neuronal activation functions such as Leaky-Integrate Fire/Integrate Fire (LIF/IF) for data processing. However, SNNs incur significant dot-product operations causing high memory and computation overhead in standard von-Neumann computing platforms. Today, In-Memory Computing (IMC) architectures have been proposed to alleviate the "memory-wall bottleneck" prevalent in von-Neumann architectures. Although recent works have proposed IMC-based SNN hardware accelerators, the following have been overlooked- 1) the adverse effects of crossbar non-ideality on SNN performance due to repeated analog dot-product operations over multiple time-steps, 2) hardware overheads of essential SNN-specific components such as the LIF/IF and data communication modules. To this end, we propose SpikeSim, a tool that can perform realistic performance, energy, latency and area evaluation of IMC-mapped SNNs. SpikeSim consists of a practical monolithic IMC architecture called SpikeFlow for mapping SNNs. Additionally, the non-ideality computation engine (NICE) and energy-latency-area (ELA) engine performs hardware-realistic evaluation of SpikeFlow-mapped SNNs. Based on 65nm CMOS implementation and experiments on CIFAR10, CIFAR100 and TinyImagenet datasets, we find that the LIF/IF neuronal module has significant area contribution (>11% of the total hardware area). We propose SNN topological modifications leading to 1.24x and 10x reduction in the neuronal module's area and the overall energy-delay-product value, respectively. Furthermore, in this work, we perform a holistic comparison between IMC implemented ANN and SNNs and conclude that lower number of time-steps are the key to achieve higher throughput and energy-efficiency for SNNs compared to 4-bit ANNs., Comment: 14 pages, 22 figures

Spiking Neural Networks (SNNs) have recently emerged as a new generation of low-power deep neural networks, which is suitable to be implemented on low-power mobile/edge devices. As such devices have limited memory storage, neural pruning on SNNs has been widely explored in recent years. Most existing SNN pruning works focus on shallow SNNs (2~6 layers), however, deeper SNNs (>16 layers) are proposed by state-of-the-art SNN works, which is difficult to be compatible with the current SNN pruning work. To scale up a pruning technique towards deep SNNs, we investigate Lottery Ticket Hypothesis (LTH) which states that dense networks contain smaller subnetworks (i.e., winning tickets) that achieve comparable performance to the dense networks. Our studies on LTH reveal that the winning tickets consistently exist in deep SNNs across various datasets and architectures, providing up to 97% sparsity without huge performance degradation. However, the iterative searching process of LTH brings a huge training computational cost when combined with the multiple timesteps of SNNs. To alleviate such heavy searching cost, we propose Early-Time (ET) ticket where we find the important weight connectivity from a smaller number of timesteps. The proposed ET ticket can be seamlessly combined with a common pruning techniques for finding winning tickets, such as Iterative Magnitude Pruning (IMP) and Early-Bird (EB) tickets. Our experiment results show that the proposed ET ticket reduces search time by up to 38% compared to IMP or EB methods. Code is available at Github., Comment: Accepted to European Conference on Computer Vision (ECCV) 2022

Spiking Neural Networks (SNNs) have recently emerged as the low-power alternative to Artificial Neural Networks (ANNs) owing to their asynchronous, sparse, and binary information processing. To improve the energy-efficiency and throughput, SNNs can be implemented on memristive crossbars where Multiply-and-Accumulate (MAC) operations are realized in the analog domain using emerging Non-Volatile-Memory (NVM) devices. Despite the compatibility of SNNs with memristive crossbars, there is little attention to study on the effect of intrinsic crossbar non-idealities and stochasticity on the performance of SNNs. In this paper, we conduct a comprehensive analysis of the robustness of SNNs on non-ideal crossbars. We examine SNNs trained via learning algorithms such as, surrogate gradient and ANN-SNN conversion. Our results show that repetitive crossbar computations across multiple time-steps induce error accumulation, resulting in a huge performance drop during SNN inference. We further show that SNNs trained with a smaller number of time-steps achieve better accuracy when deployed on memristive crossbars., Comment: Accepted in ACM/IEEE International Symposium on Low Power Electronics and Design (ISLPED), 2022

Spiking Neural Networks (SNNs) have gained huge attention as a potential energy-efficient alternative to conventional Artificial Neural Networks (ANNs) due to their inherent high-sparsity activation. Recently, SNNs with backpropagation through time (BPTT) have achieved a higher accuracy result on image recognition tasks than other SNN training algorithms. Despite the success from the algorithm perspective, prior works neglect the evaluation of the hardware energy overheads of BPTT due to the lack of a hardware evaluation platform for this SNN training algorithm. Moreover, although SNNs have long been seen as an energy-efficient counterpart of ANNs, a quantitative comparison between the training cost of SNNs and ANNs is missing. To address the aforementioned issues, in this work, we introduce SATA (Sparsity-Aware Training Accelerator), a BPTT-based training accelerator for SNNs. The proposed SATA provides a simple and re-configurable systolic-based accelerator architecture, which makes it easy to analyze the training energy for BPTT-based SNN training algorithms. By utilizing the sparsity, SATA increases its computation energy efficiency by $5.58 \times$ compared to the one without using sparsity. Based on SATA, we show quantitative analyses of the energy efficiency of SNN training and compare the training cost of SNNs and ANNs. The results show that, on Eyeriss-like systolic-based architecture, SNNs consume $1.27\times$ more total energy with sparsities when compared to ANNs. We find that such high training energy cost is from time-repetitive convolution operations and data movements during backpropagation. Moreover, to propel the future SNN training algorithm design, we provide several observations on energy efficiency for different SNN-specific training parameters and propose an energy estimation framework for SNN training. Code for our framework is made publicly available., Comment: 13 pages. Accepted to IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (2022)

Recent years have seen a paradigm shift towards multi-task learning. This calls for memory and energy-efficient solutions for inference in a multi-task scenario. We propose an algorithm-hardware co-design approach called MIME. MIME reuses the weight parameters of a trained parent task and learns task-specific threshold parameters for inference on multiple child tasks. We find that MIME results in highly memory-efficient DRAM storage of neural-network parameters for multiple tasks compared to conventional multi-task inference. In addition, MIME results in input-dependent dynamic neuronal pruning, thereby enabling energy-efficient inference with higher throughput on a systolic-array hardware. Our experiments with benchmark datasets (child tasks)- CIFAR10, CIFAR100, and Fashion-MNIST, show that MIME achieves ~3.48x memory-efficiency and ~2.4-3.1x energy-savings compared to conventional multi-task inference in Pipelined task mode., Comment: Accepted in Design Automation Conference (DAC), 2022

Federated learning has been extensively studied and is the prevalent method for privacy-preserving distributed learning in edge devices. Correspondingly, continual learning is an emerging field targeted towards learning multiple tasks sequentially. However, there is little attention towards additional challenges emerging when federated aggregation is performed in a continual learning system. We identify \textit{client drift} as one of the key weaknesses that arise when vanilla federated averaging is applied in such a system, especially since each client can independently have different order of tasks. We outline a framework for performing Federated Continual Learning (FCL) by using NetTailor as a candidate continual learning approach and show the extent of the problem of client drift. We show that adaptive federated optimization can reduce the adverse impact of client drift and showcase its effectiveness on CIFAR100, MiniImagenet, and Decathlon benchmarks. Further, we provide an empirical analysis highlighting the interplay between different hyperparameters such as client and server learning rates, the number of local training iterations, and communication rounds. Finally, we evaluate our framework on useful characteristics of federated learning systems such as scalability, robustness to the skewness in clients' data distribution, and stragglers.

Developing neuromorphic intelligence on event-based datasets with Spiking Neural Networks (SNNs) has recently attracted much research attention. However, the limited size of event-based datasets makes SNNs prone to overfitting and unstable convergence. This issue remains unexplored by previous academic works. In an effort to minimize this generalization gap, we propose Neuromorphic Data Augmentation (NDA), a family of geometric augmentations specifically designed for event-based datasets with the goal of significantly stabilizing the SNN training and reducing the generalization gap between training and test performance. The proposed method is simple and compatible with existing SNN training pipelines. Using the proposed augmentation, for the first time, we demonstrate the feasibility of unsupervised contrastive learning for SNNs. We conduct comprehensive experiments on prevailing neuromorphic vision benchmarks and show that NDA yields substantial improvements over previous state-of-the-art results. For example, the NDA-based SNN achieves accuracy gain on CIFAR10-DVS and N-Caltech 101 by 10.1% and 13.7%, respectively. Code is available on GitHub https://github.com/Intelligent-Computing-Lab-Yale/NDA_SNN, Comment: Accepted to the 17th European Conference on Computer Vision (ECCV 2022)

Prior state-of-the-art adversarial detection works are classifier model dependent, i.e., they require classifier model outputs and parameters for training the detector or during adversarial detection. This makes their detection approach classifier model specific. Furthermore, classifier model outputs and parameters might not always be accessible. To this end, we propose a classifier model independent adversarial detection method using a simple energy function to distinguish between adversarial and natural inputs. We train a standalone detector independent of the classifier model, with a layer-wise energy separation (LES) training to increase the separation between natural and adversarial energies. With this, we perform energy distribution-based adversarial detection. Our method achieves comparable performance with state-of-the-art detection works (ROC-AUC > 0.9) across a wide range of gradient, score and gaussian noise attacks on CIFAR10, CIFAR100 and TinyImagenet datasets. Furthermore, compared to prior works, our detection approach is light-weight, requires less amount of training data (40% of the actual dataset) and is transferable across different datasets. For reproducibility, we provide layer-wise energy separation training code at https://github.com/Intelligent-Computing-Lab-Yale/Energy-Separation-Training, Comment: This paper has 14 pages of content and 2 pages of references

Recent Spiking Neural Networks (SNNs) works focus on an image classification task, therefore various coding techniques have been proposed to convert an image into temporal binary spikes. Among them, rate coding and direct coding are regarded as prospective candidates for building a practical SNN system as they show state-of-the-art performance on large-scale datasets. Despite their usage, there is little attention to comparing these two coding schemes in a fair manner. In this paper, we conduct a comprehensive analysis of the two codings from three perspectives: accuracy, adversarial robustness, and energy-efficiency. First, we compare the performance of two coding techniques with various architectures and datasets. Then, we measure the robustness of the coding techniques on two adversarial attack methods. Finally, we compare the energy-efficiency of two coding schemes on a digital hardware platform. Our results show that direct coding can achieve better accuracy especially for a small number of timesteps. In contrast, rate coding shows better robustness to adversarial attacks owing to the non-differentiable spike generation process. Rate coding also yields higher energy-efficiency than direct coding which requires multi-bit precision for the first layer. Our study explores the characteristics of two codings, which is an important design consideration for building SNNs. The code is made available at https://github.com/Intelligent-Computing-Lab-Yale/Rate-vs-Direct., Comment: Accepted to ICASSP2022

Spiking Neural Networks (SNNs) have gained huge attention as a potential energy-efficient alternative to conventional Artificial Neural Networks (ANNs) due to their inherent high-sparsity activation. However, most prior SNN methods use ANN-like architectures (e.g., VGG-Net or ResNet), which could provide sub-optimal performance for temporal sequence processing of binary information in SNNs. To address this, in this paper, we introduce a novel Neural Architecture Search (NAS) approach for finding better SNN architectures. Inspired by recent NAS approaches that find the optimal architecture from activation patterns at initialization, we select the architecture that can represent diverse spike activation patterns across different data samples without training. Moreover, to further leverage the temporal information among the spikes, we search for feed forward connections as well as backward connections (i.e., temporal feedback connections) between layers. Interestingly, SNASNet found by our search algorithm achieves higher performance with backward connections, demonstrating the importance of designing SNN architecture for suitably using temporal information. We conduct extensive experiments on three image recognition benchmarks where we show that SNASNet achieves state-of-the-art performance with significantly lower timesteps (5 timesteps). Code is available at Github., Comment: Accepted to European Conference on Computer Vision (ECCV) 2022

Recently several structured pruning techniques have been introduced for energy-efficient implementation of Deep Neural Networks (DNNs) with lesser number of crossbars. Although, these techniques have claimed to preserve the accuracy of the sparse DNNs on crossbars, none have studied the impact of the inexorable crossbar non-idealities on the actual performance of the pruned networks. To this end, we perform a comprehensive study to show how highly sparse DNNs, that result in significant crossbar-compression-rate, can lead to severe accuracy losses compared to unpruned DNNs mapped onto non-ideal crossbars. We perform experiments with multiple structured-pruning approaches (such as, C/F pruning, XCS and XRS) on VGG11 and VGG16 DNNs with benchmark datasets (CIFAR10 and CIFAR100). We propose two mitigation approaches - Crossbar column rearrangement and Weight-Constrained-Training (WCT) - that can be integrated with the crossbar-mapping of the sparse DNNs to minimize accuracy losses incurred by the pruned models. These help in mitigating non-idealities by increasing the proportion of low conductance synapses on crossbars, thereby improving their computational accuracies., Comment: Accepted in Design, Automation and Test in Europe (DATE) Conference, 2022

Binary memristive crossbars have gained huge attention as an energy-efficient deep learning hardware accelerator. Nonetheless, they suffer from various noises due to the analog nature of the crossbars. To overcome such limitations, most previous works train weight parameters with noise data obtained from a crossbar. These methods are, however, ineffective because it is difficult to collect noise data in large-volume manufacturing environment where each crossbar has a large device/circuit level variation. Moreover, we argue that there is still room for improvement even though these methods somewhat improve accuracy. This paper explores a new perspective on mitigating crossbar noise in a more generalized way by manipulating input binary bit encoding rather than training the weight of networks with respect to noise data. We first mathematically show that the noise decreases as the number of binary bit encoding pulses increases when representing the same amount of information. In addition, we propose Gradient-based Bit Encoding Optimization (GBO) which optimizes a different number of pulses at each layer, based on our in-depth analysis that each layer has a different level of noise sensitivity. The proposed heterogeneous layer-wise bit encoding scheme achieves high noise robustness with low computational cost. Our experimental results on public benchmark datasets show that GBO improves the classification accuracy by ~5-40% in severe noise scenarios., Comment: Accepted to DATE2022

Spiking Neural Networks (SNNs) have recently emerged as the low-power alternative to Artificial Neural Networks (ANNs) because of their sparse, asynchronous, and binary event-driven processing. Due to their energy efficiency, SNNs have a high possibility of being deployed for real-world, resource-constrained systems such as autonomous vehicles and drones. However, owing to their non-differentiable and complex neuronal dynamics, most previous SNN optimization methods have been limited to image recognition. In this paper, we explore the SNN applications beyond classification and present semantic segmentation networks configured with spiking neurons. Specifically, we first investigate two representative SNN optimization techniques for recognition tasks (i.e., ANN-SNN conversion and surrogate gradient learning) on semantic segmentation datasets. We observe that, when converted from ANNs, SNNs suffer from high latency and low performance due to the spatial variance of features. Therefore, we directly train networks with surrogate gradient learning, resulting in lower latency and higher performance than ANN-SNN conversion. Moreover, we redesign two fundamental ANN segmentation architectures (i.e., Fully Convolutional Networks and DeepLab) for the SNN domain. We conduct experiments on two public semantic segmentation benchmarks including the PASCAL VOC2012 dataset and the DDD17 event-based dataset. In addition to showing the feasibility of SNNs for semantic segmentation, we show that SNNs can be more robust and energy-efficient compared to their ANN counterparts in this domain.

Present-day Deep Reinforcement Learning (RL) systems show great promise towards building intelligent agents surpassing human-level performance. However, the computational complexity associated with the underlying deep neural networks (DNNs) leads to power-hungry implementations. This makes deep RL systems unsuitable for deployment on resource-constrained edge devices. To address this challenge, we propose a reconfigurable architecture with preemptive exits for efficient deep RL (RAPID-RL). RAPID-RL enables conditional activation of DNN layers based on the difficulty level of inputs. This allows to dynamically adjust the compute effort during inference while maintaining competitive performance. We achieve this by augmenting a deep Q-network (DQN) with side-branches capable of generating intermediate predictions along with an associated confidence score. We also propose a novel training methodology for learning the actions and branch confidence scores in a dynamic RL setting. Our experiments evaluate the proposed framework for Atari 2600 gaming tasks and a realistic Drone navigation task on an open-source drone simulator (PEDRA). We show that RAPID-RL incurs 0.34x (0.25x) number of operations (OPS) while maintaining performance above 0.88x (0.91x) on Atari (Drone navigation) tasks, compared to a baseline-DQN without any side-branches. The reduction in OPS leads to fast and efficient inference, proving to be highly beneficial for the resource-constrained edge where making quick decisions with minimal compute is essential.

Adversarial input detection has emerged as a prominent technique to harden Deep Neural Networks(DNNs) against adversarial attacks. Most prior works use neural network-based detectors or complex statistical analysis for adversarial detection. These approaches are computationally intensive and vulnerable to adversarial attacks. To this end, we propose DetectX - a hardware friendly adversarial detection mechanism using hardware signatures like Sum of column Currents (SoI) in memristive crossbars (XBar). We show that adversarial inputs have higher SoI compared to clean inputs. However, the difference is too small for reliable adversarial detection. Hence, we propose a dual-phase training methodology: Phase1 training is geared towards increasing the separation between clean and adversarial SoIs; Phase2 training improves the overall robustness against different strengths of adversarial attacks. For hardware-based adversarial detection, we implement the DetectX module using 32nm CMOS circuits and integrate it with a Neurosim-like analog crossbar architecture. We perform hardware evaluation of the Neurosim+DetectX system on the Neurosim platform using datasets-CIFAR10(VGG8), CIFAR100(VGG16) and TinyImagenet(ResNet18). Our experiments show that DetectX is 10x-25x more energy efficient and immune to dynamic adversarial attacks compared to previous state-of-the-art works. Moreover, we achieve high detection performance (ROC-AUC > 0.95) for strong white-box and black-box attacks. The code has been released at https://github.com/Intelligent-Computing-Lab-Yale/DetectX, Comment: 14 pages, 13 figures

As neural networks get widespread adoption in resource-constrained embedded devices, there is a growing need for low-power neural systems. Spiking Neural Networks (SNNs)are emerging to be an energy-efficient alternative to the traditional Artificial Neural Networks (ANNs) which are known to be computationally intensive. From an application perspective, as federated learning involves multiple energy-constrained devices, there is a huge scope to leverage energy efficiency provided by SNNs. Despite its importance, there has been little attention on training SNNs on a large-scale distributed system like federated learning. In this paper, we bring SNNs to a more realistic federated learning scenario. Specifically, we propose a federated learning framework for decentralized and privacy-preserving training of SNNs. To validate the proposed federated learning framework, we experimentally evaluate the advantages of SNNs on various aspects of federated learning with CIFAR10 and CIFAR100 benchmarks. We observe that SNNs outperform ANNs in terms of overall accuracy by over 15% when the data is distributed across a large number of clients in the federation while providing up to5.3x energy efficiency. In addition to efficiency, we also analyze the sensitivity of the proposed federated SNN framework to data distribution among the clients, stragglers, and gradient noise and perform a comprehensive comparison with ANNs.

Modern computation based on the von Neumann architecture is today a mature cutting-edge science. In the Von Neumann architecture, processing and memory units are implemented as separate blocks interchanging data intensively and continuously. This data transfer is responsible for a large part of the power consumption. The next generation computer technology is expected to solve problems at the exascale with 1018 calculations each second. Even though these future computers will be incredibly powerful, if they are based on von Neumann type architectures, they will consume between 20 and 30 megawatts of power and will not have intrinsic physically built-in capabilities to learn or deal with complex data as our brain does. These needs can be addressed by neuromorphic computing systems which are inspired by the biological concepts of the human brain. This new generation of computers has the potential to be used for the storage and processing of large amounts of digital information with much lower power consumption than conventional processors. Among their potential future applications, an important niche is moving the control from data centers to edge devices. The aim of this Roadmap is to present a snapshot of the present state of neuromorphic technology and provide an opinion on the challenges and opportunities that the future holds in the major areas of neuromorphic technology, namely materials, devices, neuromorphic circuits, neuromorphic algorithms, applications, and ethics. The Roadmap is a collection of perspectives where leading researchers in the neuromorphic community provide their own view about the current state and the future challenges. We hope that this Roadmap will be a useful resource to readers outside this field, for those who are just entering the field, and for those who are well established in the neuromorphic community. https://doi.org/10.1088/2634-4386/ac4a83

With a growing need to enable intelligence in embedded devices in the Internet of Things (IoT) era, secure hardware implementation of Deep Neural Networks (DNNs) has become imperative. We will focus on how to address adversarial robustness for DNNs through efficiency-driven hardware optimizations. Since memory (specifically, dot-product operations) is a key energy-spending component for DNNs, hardware approaches in the past have focused on optimizing the memory. One such approach is approximate digital CMOS memories with hybrid 6T-8T SRAM cells that enable supply voltage (Vdd) scaling yielding low-power operation, without significantly affecting the performance due to read/write failures incurred in the 6T cells. In this paper, we show how the bit-errors in the 6T cells of hybrid 6T-8T memories minimize the adversarial perturbations in a DNN. Essentially, we find that for different configurations of 8T-6T ratios and scaledVdd operation, noise incurred in the hybrid memory architectures is bound within specific limits. This hardware noise can potentially interfere in the creation of adversarial attacks in DNNs yielding robustness. Another memory optimization approach involves using analog memristive crossbars that perform Matrix-Vector-Multiplications (MVMs) efficiently with low energy and area requirements. However, crossbars generally suffer from intrinsic non-idealities that cause errors in performing MVMs, leading to degradation in the accuracy of the DNNs. We will show how the intrinsic hardware variations manifested through crossbar non-idealities yield adversarial robustness to the mapped DNNs without any additional optimization., Comment: 6 pages, 8 figures, 3 tables; Accepted in DATE 2021 conference. arXiv admin note: text overlap with arXiv:2008.11298

How can we bring both privacy and energy-efficiency to a neural system? In this paper, we propose PrivateSNN, which aims to build low-power Spiking Neural Networks (SNNs) from a pre-trained ANN model without leaking sensitive information contained in a dataset. Here, we tackle two types of leakage problems: 1) Data leakage is caused when the networks access real training data during an ANN-SNN conversion process. 2) Class leakage is caused when class-related features can be reconstructed from network parameters. In order to address the data leakage issue, we generate synthetic images from the pre-trained ANNs and convert ANNs to SNNs using the generated images. However, converted SNNs remain vulnerable to class leakage since the weight parameters have the same (or scaled) value with respect to ANN parameters. Therefore, we encrypt SNN weights by training SNNs with a temporal spike-based learning rule. Updating weight parameters with temporal data makes SNNs difficult to be interpreted in the spatial domain. We observe that the encrypted PrivateSNN eliminates data and class leakage issues with a slight performance drop (less than ~2) and significant energy-efficiency gain (about 55x) compared to the standard ANN. We conduct extensive experiments on various datasets including CIFAR10, CIFAR100, and TinyImageNet, highlighting the importance of privacy-preserving SNN training., Comment: Accepted to AAAI2022