Search

This study describes the sustainable and eco-friendly synthesis of the silica-based mesoporous structure from the use of alternative amorphous silica extracted from rice husk ash (RHA). The mesoporous material was called MCM-48 (RHA), and its application as adsorbent to the antimony (Sb) remediation in environmental samples was tested. The adsorbent was prepared by an efficient and sustainable hydrothermal method, which exhibited an amorphous framework with type IV isotherms and type H1 hysteresis, and surface area, total pore volume, and pore diameter values of 820.9 m 2 g -1 , 0.6 cm 3 g -1 , and 3.7 nm, respectively. In addition, the MCM-48 (RHA) exhibited a three-dimensional cubic mesostructure (Ia3d space-group symmetry) with a narrow mesopore distribution, uniform spherical particles, and well-defined architecture. Multivariate optimization using a factorial design (2 4 ) was employed in the adsorption tests of Sb. The variables evaluated and the optimum conditions obtained were (i) adsorbent mass (45 mg); (ii) adsorption time (115 min); (iii) pH 2; and (iv) Sb initial concentration of 8 mol L -1 . In these conditions, we found a maximum adsorption efficiency of Sb in the order of 95%. The adsorbent material proposed in this study proved to be efficient for Sb remediation in water samples under different experimental conditions. A total of five samples were analyzed and Sb concentrations on the order of 8 ppm were added, in which a removal efficiency of Sb raging between 88 and 96% was obtained for the remediation in real samples. In addition, the low cost of the synthesis of MCM-48 (RHA) in combination with its high and fast adsorption capacities offers a great promise for wastewater remediation, which makes it very attractive for environmental approaches., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Risk assessment is considered an essential tool to assist in the management and mitigation of polluted areas, especially those associated with economic activities that significantly degrade the environment, such as mining. However, most of the methodologies of risk assessment adopt the deterministic approach of using a fixed value for ascertaining the hazards derived from exposure to chemical pollutants. However, this is not the case of the Human, Ecological and Radiological Risk (HERisk) code, which allows space-time assessments of ecological, radiological, and human health risks. Indeed, this work aims to describe this new software (enhanced version of HHRISK), which not only improves the performance of the code but also increases its applicability and versatility. To showcase its usefulness in evaluating ecological pollution and human health risk were studied the contents of potentially toxic elements (Co, Cu, Fe, Mn, Ni, Pb, and Zn) in soils and surface waters from the nickel mining area in the municipality of Itagibá (Bahia, Brazil). The obtained results showed that metals are non-homogeneous distributed, suggesting the presence of local enrichment sources, mainly related to human activities. The statistical analyses carried out revealed that mining and agricultural activities are possibly responsible for the contents of these pollutants in both soils and surface waters. The calculated ecological indices of pollution confirmed anthropogenic pollution around the mining area, especially in the locations closest to sterile waste piles. The results of the human health risk assessment revealed that the ingestion of meat and contaminated water are the main routes for entering the potentially toxic elements to the human body and that Co is the chemical specie that poses the highest risk in the entire region. The hazard index (HI) values indicated that the whole area around the mine should be considered as a high risk for human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The rice husk ash (RHA) was used as an alternative source of silica for the synthesis of the functionalized mesoporous material, which was used in the removal of the PAHs naphthalene (Nap), benzo[b]fluoranthene (B[b]F), benzo[k]fluoranthene (B[k]F), and benzo[a]pyrene (B[a]P) from aqueous media. The PABA-MCM-41 (RHA) was characterized using FTIR, TGA, SAXS, and N 2 adsorption-desorption analyses. Removal experiments were performed to determine the initial concentrations, individual adsorption in comparison with the mixture of the PAHs, PABA-MCM-41 (RHA) amount, pH, time, and temperature, and the results obtained were statistically analyzed. The PABA-MCM-41 (RHA) presented the S BET , V T , and D BJH values of 438 m 2  g -1 , 0.41 cm 3  g -1 , and 3.59 nm, respectively, and good thermal stability. The q e values found in the kinetic equilibrium for the PAHs mixture followed increasing order: Nap < B[a] P < B[k]F < B[b]F, with removal percentages of 89.08 ± 0.00, 93.85 ± 0.28, 94.54 ± 0.10, and 97.80 ± 0.05%, respectively. Graphical abstract.

Due to the continual increase in waste generated from electronic devices, the management of plastics, which represents between 10 and 30% by weight of waste electrical and electronic equipment (WEEE or e-waste), becomes indispensable in terms of environmental and economic impacts. Considering the importance of acrylonitrile-butadiene-styrene (ABS), polycarbonate (PC), and their blends in the electronics and other industries, this study presents a new application of laser-induced breakdown spectroscopy (LIBS) for the fast and direct determination of PC and ABS concentrations in blends of these plastics obtained from samples of e-waste. From the LIBS spectra acquired for the PC/ABS blend, multivariate calibration models were built using partial least squares (PLS) regression. In general, it was possible to infer that the relative errors between the theoretical or reference and predicted values for the spiked samples were lower than 10%., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Distinct affinities between the organic and inorganic phases were observed in nanocomposites prepared through a colloidal route with carboxylated nitrile rubber and modified silica nanoparticles, which resulted in variable mechanical properties and improved thermal stability. Nanoparticles with modified surface affected the macromolecular arrangements of the elastomeric matrix, changing the final mechanical behavior of the nanocomposite, which could be predicted by the spin-lattice relaxation time measured by solid-state NMR. It was also possible to identify how each different nanoparticle affected the molecular dynamic of nanocomposite, correlating the dynamic-mechanical analysis with the NMR data of the saturated carbons of the elastomer., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Cancer is the second leading cause of death worldwide and there is epidemiological evidence that demonstrates this tendency is emerging. Naringenin (NGEN) is a trihydroxyflavanone that shows various biological effects such as antioxidant, anticancer, anti-inflammatory, and antiviral activities. It belongs to flavanone class, which represents flavonoids with a C6-C3-C6 skeleton. Flavonoids do not exhibit sufficient activity to be used for chemotherapy, however they can be chemically modified by complexation with metals such as copper (Cu) (II) for instance, in order to be applied for adjuvant therapy. This study investigated the effects of Cu(II) and 2,2'-bipyridine complexation with naringenin on MDA-MB-231 cells. We demonstrated that naringenin complexed with Cu(II) and 2,2'-bipyridine (NGENCuB) was more efficient inhibiting colony formation, proliferation and migration of MDA-MB-231 tumor cells, than naringenin (NGEN) itself. Furthermore, we verified that NGENCuB was more effective than NGEN inhibiting pro-MMP9 activity by zymography assays. Finally, through flow cytometry, we showed that NGENCuB is more efficient than NGEN inducing apoptosis in MDA-MB-231 cells. These results were confirmed by gene expression analysis in real time PCR. We observed that NGENCuB upregulated the expression of pro-apoptotic gene caspase-9, but did not change the expression of caspase-8 or anti-apoptotic gene Bcl-2. There are only few works investigating the effects of Cu(II) complexation with naringenin on tumor cells. To the best of our knowledge, this is the first work describing the effects of Cu(II) complexation of a flavonoid on MDA-MB-231 breast tumor cells.