Search

The evaluation of the use of Artificial Intelligence (AI) in legal decisions still has unsolved questions. These may refer to the perceived degree of seriousness of the possible errors committed, the distribution of responsibility among the different decision-makers (human or artificial), and the evaluation of the error concerning its possible benevolent or malevolent consequences on the person sanctioned. Above all, assessing the possible relationships between these variables appears relevant. To this aim, we conducted a study through an online questionnaire (N = 288) where participants had to consider different scenarios in which a decision-maker, human or artificial, made an error of judgement for offences punishable by a fine (Civil Law infringement) or years in prison (Criminal Law infringement). We found that humans who delegate AIs are blamed less than solo humans, although the effect of decision maker was subtle. In addition, people consider the error more serious if committed by a human being when a sentence for a crime of the penal code is mitigated, and for an AI when a penalty for an infringement of the civil code is aggravated. The mitigation of the evaluation of seriousness for joint AI-human judgement errors suggests the potential for strategic scapegoating of AIs. [ABSTRACT FROM AUTHOR]

Research on gender role stereotypes activated in interactions with humanoid robots has yet to produce conclusive knowledge. To analyse how much, and in which way, gender role stereotypes used in interactions with humans are also called into play in interactions with humanoid robots, a study was conducted with 240 participants. The study was an online survey in which a scale was used for determining the appropriateness for performing four stereotypically masculine and four feminine by humans and robots. Overall, eight humanoid robots – four judged feminine and four masculine – were considered. Results showed that gender role stereotypes are activated for both genders, but men most strongly activate those pertaining to male roles. These stereotypes are also adopted in reference to humanoid robots, though robots are generally considered less suitable for performing female roles. Furthermore, an increased degree of similarity of robots to humans has a positive effect in assessing the appropriateness to perform female roles only for female robots. The same does not happen with male robots. These results suggest that male and female robots are not categorised in the same way. Robots are essentially perceived as male entities, a particularly relevant hypothesis for the gender-sensitive design of humanoid robots. [ABSTRACT FROM AUTHOR]

With the spread of the pandemic and the introduction of measures aimed at its containment, it is necessary to understand in specific national contexts how home quarantine has affected the psychophysical well-being of academics, and their ability to maintain integrity. To this end we constructed an online questionnaire to investigate the levels of stress, well-being, and work-life balance in relationship with living and working conditions. Moreover, the questionnaire was designed to obtain information about the perceived occurrence, increase or decrease of misconduct in research (e.g., research misconduct by colleagues) and professional relationships (e.g., misbehaviors between colleagues, from students and toward students). The questionnaire was administered online by contacting faculty at three universities in Tuscany, Italy, asking them to relate their experience during the first lockdown (March–May 2020). Faculty members were invited to complete the questionnaire by their institutional e-mail account. The final sample consisted of 581 respondents. The results showed that inadequacies of the equipment, and particularly poor internet connection, were significantly correlated with main issues reported, such as relationships with students and research activities. Female teachers primarily suffered from stressful conditions, lacked well-being, and experienced work-life imbalance. Stress levels were related to perceptions of the frequency of misconduct and of an increase in their frequency during the period of home quarantine. Female professors, when compared to their male counterparts, perceived misconduct from students as increased and more frequent in the period of quarantine. Results point to a gender issue that is likely to arise from conditions of domestic activities imbalance and that increases stress and misconduct perception. [ABSTRACT FROM AUTHOR]

Objective: This study traces the evolution of perceptions and use of computed tomography (CT) by radiology technicians in the emergency department (ED) of a hospital in Italy across a 7-year period.Background: The sociotechnical context of the CT room of an ED has been neglected by scientific research-potentially impacting safety.Method: Two studies were performed, one in 2011 and one in 2018. Six CT technicians were involved in each. Structured interviews were performed to gather information on perceptions related to the evolution of the use of CT according to nine different factors-e.g. the level of complexity, and mental workload. Observations were performed on duration of exams, the flow of people, conversations, and any critical issues.Results: The CT technology is appreciated, used effectively and with confidence by CT technicians. From 2011-2018, the execution times of the exams have decreased but not the proportion of time dedicated to the patient. Expectations for future improvements are limited by issues concerning the design of both the user interface and the social context of the ED workplace.Conclusions: The safety and efficiency of the system as a whole are greatly dependent on the competence of the CT technicians. CT manufacturers rely on this competence to help compensate for the deficiencies created by suboptimal user interfaces and the lack of fit of the technology with the social context of the workplace.Application: Training programs aimed at improving the management of relationships and communications between staff could improve performance and efficiency. CT manufacturers should try to better understand the cognitive and operational context of the workplaces where CT technicians work-and to design better diagnostic technology which accounts for these operational realities. [ABSTRACT FROM AUTHOR]

The relationship between stress and unethical behaviour amongst non-tenured research staff in academia is a relatively unexplored phenomenon. The research reported herein was therefore carried out with the aim of exploring the relationship(s) between stress, the socio-organisational factors which contribute to it, job satisfaction, perceptions of job instability, and the occurrence of unethical behaviour in research. 793 Italian researchers participated in the research—all of whom were working on fixed-term contracts—after being individually requested to complete an online questionnaire. The data indicate that unethical behaviours occur with alarming frequency. The stress level reported is quite high, as is the level of perceived job insecurity, both of which impact upon levels of job satisfaction. Perceived stress levels also seem to play a role in the commission of unethical behaviours, but this relationship is irrelevant when one considers the role of social and organisational factors that are known to induce it. Indeed, it seems that there are various socio-organisational determinants of stress that have an obvious direct negative influence on the commission of unethical behaviours more than the stress level per se. This research paints a worrying picture in relation to the psycho-physical state of non-tenured researchers as a result of the working conditions in which they find themselves in Italian universities. [ABSTRACT FROM AUTHOR]

The issue of the periodical presents selected highlights from ECCE 2021, the 32nd European Conference on Cognitive Ergonomics. It mentions that the conference is the annual event of the European Association of Cognitive Ergonomics (EACE), a leading conference on human-media interaction that provides an opportunity for researchers and practitioners to exchange new ideas and practical experiences for a variety of domains.

We studied a novel illusion of tilt inside checkerboards due to the role of contrast polarity in contour integration. The preference for binding of oriented contours having same contrast polarity, over binding of opposite polarity ones (CP rule), has been used to explain several visual illusions. In three experiments we investigated how the binding effect is influenced by luminance contrast value, relatability of contour elements, and distance among them. Experiment 1 showed that the effect was indeed present only when the CP rule was satisfied, and found it to be stronger when the luminance contrast values of the elements are more similar. In experiment 2 the illusion was reported only with relatable edges, and its strength was modulated by the degree of relatability. The CP-rule effectiveness, thus, seems to depend on good continuation. The intensity of contrast polarity signals propagating from an oriented contour might be the less intense, the more its direction deviates from linearity. In experiment 3 we estimated the distance threshold and found it to be smaller than the one found for other illusions, arising with collinear fragments. This seems to show that the reach of the contrast polarity signal inside the association field of a contour unit is shorter along non-collinear orientations than along collinear ones. [ABSTRACT FROM AUTHOR]

Abstract: High Reliability Organizations (HROs) are complex systems in which many accidents and adverse events that could occur within those systems or at the interfaces with other systems are actually avoided or prevented. Many organizations in high-risk industries have successfully implemented HRO approaches. In recent years, initiatives have been undertaken aimed at transforming hospitals into HROs. Actually, despite some improvements, these initiatives have not shown the expected results. In this paper, we discuss the possible reasons for such outcomes. We will show that, when compared with traditional HROs, hospitals are undoubtedly high-risk organizations, but have specificities and experience systemic socio-organizational barriers that make them difficult to transform into HROs. [Copyright &y& Elsevier]

To obtain the representation of a contour, the visual system integrates fragments of a pattern. One of the 'binding rules' governing this process requires that a path of conjunction in which contrast polarity is preserved be followed. Here we show that this rule has a corollary: where two alternative paths compete to emerge in opposite directions, the one with greater contrast luminance is likely to prevail. [ABSTRACT FROM AUTHOR]

What we perceive as a unitary object can be the result of integrative processes that generate a whole from parts. Although this issue of visual perception has been widely explored, recent experimental findings demonstrate that our knowledge is still incomplete. In particular, the question whether contour binding is affected by the sign of contrast (contrast polarity) across edges requires more in-depth examination. Here we show the effects of edge bindings that originate from the merging of laterally displaced edges with the same contrast polarity. We have studied a particular context in which such effects may emerge: a checkerboard with a series of alternated dark and light shapes superimposed on the corners of the squares. The phenomenal observations and experimental findings support the theories according to which boundary completions are originated by phenomena of edge propagation within a 'field of completion' (eg Shipley and Kellman, 2003 Perception 32 985–999) adjacent to an edge ending. Our findings conform to the Shipley and Kellman theory that boundary completion results from the interaction of edges as well as from edges and shapes lacking in oriented contours, the latter serving as 'receiving units', anchoring the paths of activations generated by oriented edges. We propose to integrate this theory with the hypothesis that interactions sensitive to the contrast sign generate conjunction paths of edges that alter their perceived orientation. Based on this perspective we propose an alternative account for the Cafe Wall illusion that can be extended to other phenomena of orientation misperception and to a Cafe Wall inversion effect that has not been observed previously. [ABSTRACT FROM AUTHOR]

Abstract Ponzo illusion has been explained by considering either just the inducing elements present in a restricted area of the visual field, the same area in which the test elements are located, or the stimulus configuration as a whole in which even the most distal figural elements i.e., the external converging lines, here called "Ponzo wedge" play a crucial role. The two studies reported here aimed at showing that both global configurational characteristics and inducing elements locally interacting with the test stimuli can independently affect the illusory effect. This hypothesis was tested using stimuli in which graphic-inducing elements giving rise to a herringbone pattern (Coren & Girgus, 1978) were drawn in the same area of the test segments. Results of Exp. 1 confirmed the effect of the two factors. In particular, both factors proved to determine the illusion, since they induced illusory effects either in isolation or in the same/opposite direction. In Exp. 2 the relative weight of these two factors was evaluated in relation to the width of the angle of the inducing elements and to the distance of the test segments from the vertex. Results showed no linear relationships between the distance of the test segments from the external inducing elements and the weight of the Ponzo wedge factor. [ABSTRACT FROM AUTHOR]

During the COVID-19 pandemic, the use of social media offered a possible way to address the difficulties of social relationships for people with autism spectrum disorder (ASD), as well as a way to ease the problems of their caregivers. To gather information on the feasibility of this solution, we conducted an online questionnaire about the first lockdown period in Italy (March–May 2020) with 29 caregivers of ASD individuals. The questionnaire investigated their living conditions, the way time was spent during isolation, the availability of technological equipment, the perceived level of anxiety and the perceived utility of social media. The results showed that the difficulties of using social media had not been overcome, even at this time of greatest need. However, caregivers who take care of ASD people with high levels of anxiety perceived social media as more useful. This result invites further reflection on how to implement social media effectively for people with ASD. [ABSTRACT FROM AUTHOR]

Research has usually considered cyberbullying as a unitary phenomenon. Thus, it has been neglected to explore whether the specific online aggressive behaviours relate differentially to demographic features of the perpetrators of online aggressive actions, their personality characteristics, or to the ways in which they interact with the Internet. To bridge this gap, a study was conducted through a questionnaire administered online to 1228 Italian high-school students (Female: 61.1%; 14–15 yo: 48.%; 16–17 yo: 29.1%; 18–20 yo: 20.4%, 21–25 yo: 1.6%; Northern Italy: 4.1%; Central Italy: 59.2%; Southern Italy: 36.4%). The questionnaire, in addition to items about the use of social media, mechanisms of Moral Disengagement and personality characteristics of the participants in the study, also included a scale for the measurement of cyberbullying through the reference to six aggressive behaviours. The results indicate that cyberbullying can be considered as a non-unitary phenomenon in which the different aggressive behaviours can be related to different individual characteristics such as gender, personality traits and the different ways of interacting with social media. Moreover, the existence of two components of cyberbullying has been highlighted, one related to virtual offensive actions directly aimed at a victim, the other to indirect actions, more likely conducted involving bystanders. These findings open important perspectives for understanding, preventing, and mitigating cyberbullying among adolescents. [ABSTRACT FROM AUTHOR]

“Nomadic” patients are people who, mainly for work, move around the world very often. Such people have the right to an effective, safe, fast health-care assistance wherever they are. Some technological devices are currently being experimented, in order to let personal health-related information be portable and easily transferable. However, each of these devices follows an idiosyncratic concept. An explorative study has been carried out in order to understand which procedures, if any are currently being used in Italy to manage nomadic patients' data. The goal of this work was to outline a concept of information architecture for an efficient technological support device, essential to the transfer of medical data. [ABSTRACT FROM AUTHOR]

As collaborative robots and artificial intelligence (AI) systems are being deployed in ever-increasing contexts, we are more and more called upon to make judgements on their moral behaviour. Understanding the factors, affecting our ethical judgements involving these types of agents, would thus seem of the uttermost importance to allow for safer and well-regulated interactions between humans and machines. So far, however, this topic has been rarely investigated. We compared the perception of the seriousness of an action committed by either a person or a robot, causing harm to either some persons or some robots, and the attribution of the appropriated punishment for that action. The results showed a significant effect of the type of victim: the action was considered more a serious offence, and deemed worthy of more severe punishment, if the victims were humans than if they were robots. A significant agent-by-victim interaction was also found in the punishment judgements: for human victims, a human agent was punished more severely than a robot, while for robot victims, a robot agent was attributed a more severe punishment than a human one. The results are discussed in the light of the theories linking moral judgements to mind perception. [ABSTRACT FROM AUTHOR]

Objective: Our scope is to provide methodological elements on how to manage effectively the preanalytical phase in the laboratory testing process, by objectively measuring the risk connected to the phases handled by man with respect to those managed by machines.Background: Preanalytical errors account for most of the mistakes related to laboratory testing and can affect patient care. Hence, it is necessary to manage the risk connected to the preanalytical phase, as required by certification and accreditation bodies. The risk assessment discloses the steps at greater risk and gives indications to make decisions.Method: We have reviewed the state of art in the automation of the preanalytical phase, addressing needs and problems. We have used the proactive risk assessment methodology FMECA (Failure Mode, Effects, and Criticality Analysis) to identify the most critical phases in our preanalytical process and have calculated the risk associated.Results: The most critical phases were the human controlled ones. In particular, the highest risk indexes were associated to manual acceptance of test orders, identification of the patients, tube labeling, and sample collection.Conclusion: Automation in the preanalytical phase is fundamental to replace, support, or extend the human contribution. Nevertheless each organization is different about workloads and competencies, so the most suitable management must be tailor-made in each context.Application: We present a method by which each organization is able to find its best balance between automation and human contribution in the control of the preanalytical phase. [ABSTRACT FROM AUTHOR]

Objective: This research aimed to evaluate the differences in the assessments made by three simulation tools used in a maintainability design office to perform human factor/ergonomics (HFE) analysis: digital human modeling (DHM), virtual reality (VR), and physical mock-up (PMU).Background: Maintainability engineers use digital/physical simulation tools in the early design phase to analyze whether the design is well adapted for maintenance operators. Knowing the potential of these simulation tools would encourage maintainability stakeholders to integrate HFE in the design process more efficiently.Method: Eleven maintenance tasks were analyzed from the participation of six maintenance operators. Various HFE indicators including physical, cognitive, and organizational indicators were assessed. Each operator repeated 11 maintenance tasks on VR and PMU. Based on the anthropometric parameters, six manikins were created to analyze 11 maintenance tasks on DHM.Results: A significant difference was found for the organizational indicators between VR and PMU, whereas the physical and cognitive indicators are similar. DHM, VR, and PMU are compared with the common HFE indicators for the physical dimension and present a significant difference for individual tasks.Conclusion: To reduce the gap between simulation tools, a better physical representation is requested on the VR platform, improving the perception of work sequences in the virtual world. Concerning DHM, a new paradigm is proposed to study a few tasks per work area instead of studying each task independently.Application: This study will help develop a new methodology and tools specifically for non-HFE experts in the maintainability department. [ABSTRACT FROM AUTHOR]

Objective: The aim of the current study is to examine the influence of static factors on overall seating comfort in motorcycles and validate the use of static lab-based setups for evaluating seating comfort in motorcycles.Background: Seating comfort in automobiles has two factors, static and dynamic. Research on seating comfort of passenger cars has shown that when the magnitude of vibration reaching the seat is low, comfort is largely determined by static factors. Studies have also validated the use of static lab-based setups for research on seating comfort in passenger cars. Static lab-based setups are easy to develop, provide a controlled environment, and efficient for experimental research. The riding posture, mass distribution, and dynamics of a motorcycle differ from a passenger car and warrant further investigation to extend the results from the research on passenger cars.Method: The study compares subjective rating of seating comfort and objective measurement of seat interface pressure in two test conditions: a static lab-based setup and actual driving on a flat test track where the magnitude of vibration reaching the seat is low. The vibration at the seat is measured for the driving trial. A group of 18 male volunteers from TVS Motor Company participated in the study, and two motorcycles from the economy/executive segment of India are used in the study. The subjective ratings are analyzed statistically using analysis of variance (ANOVA) and Pearson's correlation. The vibration data are analyzed as per ISO 2631-1 to calculate the frequency-weighted acceleration, aw.Results: The results show that there is no significant difference between the two test conditions either in the objective measurements or in the subjective rating of comfort. There is also a statistically significant correlation between the subjective ratings of seating comfort in static lab-based setup and actual riding (r = .77, p < .01, n = 36). The mean aw at the seat while driving in the test track used in this study is 0.2 m/s2.Conclusion: Static factors have a significant influence on seating comfort in motorcycles. When the vibration reaching the seat is low (aw ≤ 0.2 m/s2), seating comfort is largely determined by the static factors. The use of static lab-based setups for evaluating static factors of seating comfort in motorcycles is validated.Application: The results of this study enable further research to understand the human criterion for seating comfort in motorcycles using static lab-based setups which are easier to develop and provide controlled environment that is essential for any research. [ABSTRACT FROM AUTHOR]

Objective: To identify the critical behaviors that may hinder the correct use of foldable rollover protective structures (FROPS) on tractors and to explore the influence of user factors and FROPS technical characteristics.Background: FROPS are effective in preventing fatal injuries in rollover accidents if they are in the upright position. However, many farmers leave FROPS folded down.Method: Twenty farmers and sixteen models of tractors were involved in the study. Operators were observed while raising the FROPS, and the observed behaviors were correlated with user factors and FROPS technical features.Results: In the initial rotation of the FROPS, higher lowered roll-bar to ground distance and FROPS pivot-pin to ground distance required more awkward and unbalanced postures (p = .02 and p = .01, respectively). When rotating the FROPS in upright position, smaller stature of the participants and higher FROPS pivot-pin to ground distance were significantly correlated with using the tractor's rear 3-point lower links as a supporting surface (p = .01 and p = .02, respectively).Conclusion: FROPS might be revised considering users' comfort in use and anthropometric variability, to improve reachability, avoid risky behaviors, and enhance FROPS operation.Application: Technical solutions to enhance FROPS accessibility may be developed, particularly by providing safe surfaces to support operators and highlighting the grasping points. Further best practices and information on correct gestures to handle the FROPS should be included in the tractor manual. [ABSTRACT FROM AUTHOR]