Search

Nano-electrochemical tools to assess individual catalyst entities are critical to comprehend single-entity measurements. The intrinsic electrocatalytic activity of an individual well-defined Co3 O4 nanoparticle supported on a carbon-based nanoelectrode is determined by employing an efficient SEM-controlled robotic technique for picking and placing a single catalyst particle onto a modified carbon nanoelectrode surface. The stable nanoassembly is microscopically investigated and subsequently electrochemically characterized. The hexagonal-shaped Co3 O4 nanoparticles demonstrate size-dependent electrochemical activity and exhibit very high catalytic activity with a current density of up to 11.5 A cm-2 at 1.92 V (vs. RHE), and a turnover frequency of 532±100 s-1 at 1.92 V (vs. RHE) towards catalyzing the oxygen evolution reaction.

The number of active sites and their intrinsic activity are key factors in designing high-performance catalysts for the oxygen evolution reaction (OER). The synthesis, properties, and in-depth characterization of a homogeneous CoNiFeCu catalyst are reported, demonstrating that multimetal synergistic effects improve the OER kinetics and the intrinsic activity. In situ carbon corrosion and Cu leaching during the OER lead to an enhanced electrochemically active surface area, providing favorable conditions for improved electronic interaction between the constituent metals. After activation, the catalyst exhibits excellent activity with a low overpotential of 291.5± 0.5mV at 10 mA cm−2 and a Tafel slope of 43.9 mV dec−1. It shows superior stability compared to RuO2 in 1 m KOH, which is even preserved for 120 h at 500 mA cm−2 in 7 m KOH at 50°C. Single particles of this CoNiFeCu after their placement on nanoelectrodes combined with identical location transmission electron microscopy before and after applying cyclic voltammetry are investigated. The improved catalytic performance is due to surface carbon corrosion and Cu leaching. The proposed catalyst design strategy combined with the unique single-nanoparticle technique contributes to the development and characterization of high-performance catalysts for electrochemical energy conversion.

Discovery of new catalysts is crucial for future growth and development of environmentally friendly energy conversion processes e. g. the production of hydrogen by water electrolysis. We developed an aerosol-based synthesis technique as a comparatively fast and facile method to prepare multi-metal catalysts. 22 different quinary metal compositions were synthesized and investigated with respect to their activity for the oxygen evolution (OER) and the glycerol oxidation (GOR) reactions. The impact of the element composition and the homogeneous distribution of the elements in the particles on catalytic performance were evaluated. The highest activity for OER was found for \(Co_{20}Cu_{20}Ni_{20}Fe_{20}Zn_{20}\). For GOR, Ag-containing catalysts were the most active, however, in most cases Ag was locally enriched and not homogeneously mixed with the other metals in the particles. Ag-based catalysts outperformed similar compositions containing one or more noble metals. The GOR selectivity of selected catalysts during long-term electrolysis was also investigated and it was shown that varying the catalyst composition via aerosol-based synthesis is a potential way to modulate the GOR selectivity.

NiyP emerged as a highly active precatalyst for the alkaline oxygen evolution reaction where structural changes play a crucial role for its catalytic performance. We probed the chemical stability o...

Mo-doped BiVO4 has emerged as a promising material for photoelectrodes for photoelectrochemical water splitting, however, still shows a limited efficiency for light-driven water oxidation. We present the influence of an oxygen-evolution catalyst composed of Ni, Fe, and Cr oxides on the activity of Mo:BiVO4 photoanodes. The photoanodes are prepared by spray-coating, enabling compositional and thickness gradients of the incorporated catalyst. Two different configurations are evaluated, namely with the catalyst embedded into the Mo:BiVO4 film or deposited on top of it. Both configurations provide a significantly different impact on the photoelectrocatalytic efficiency. Structural characterisation of the materials by means of SEM, TEM and XRD as well as the photoelectrocatalytic activity investigated by means of an optical scanning droplet cell and in situ detection of oxygen using scanning photoelectrochemical microscopy are presented.

Scanning electrochemical cell microscopy (SECCM) is increasingly applied to determine the intrinsic catalytic activity of single electrocatalyst particle. This is especially feasible if the catalyst nanoparticles are large enough that they can be found and counted in post-SECCM scanning electron microscopy images. Evidently, this becomes impossible for very small nanoparticles and hence, a catalytic current measured in one landing zone of the SECCM droplet cannot be correlated to the exact number of catalyst particles. We show, that by introducing a ruler method employing a carbon nanoelectrode decorated with a countable number of the same catalyst particles from which the catalytic activity can be determined, the activity determined using SECCM from many spots can be converted in the intrinsic catalytic activity of a certain number of catalyst nanoparticles.

Bimetallic silver-copper electrocatalysts are promising materials for electrochemical CO2 reduction reaction (CO2RR) to fuels and multi-carbon molecules. Here, we combine Ag core/porous Cu shell particles, which entrap reaction intermediates and thus facilitate the formation of C2+ products at low overpotentials, with gas diffusion electrodes (GDE). Mass transport plays a crucial role in the product selectivity in CO2RR. Conventional Hcell configurations suffer from limited CO2 diffusion to the reaction zone, thus decreasing the rate of the CO2RR. In contrast, in the case of GDE-based cells, the CO2RR takes place under enhanced mass transport conditions. Hence, investigation of the Ag core/porous Cu shell particles at the same potentials under different mass transport regimes reveals: (i) a variation of product distribution including C3 products, and (ii) a significant change in the local OH- activity under operation.

Nano‐electrochemical tools to assess individual catalyst entities are critical to comprehend single‐entity measurements. The intrinsic electrocatalytic activity of an individual well‐defined Co3O4 nanoparticle supported on a carbon‐based nanoelectrode is determined by employing an efficient SEM‐controlled robotic technique for picking and placing a single catalyst particle onto a modified carbon nanoelectrode surface. The stable nanoassembly is microscopically investigated and subsequently electrochemically characterized. The hexagonal‐shaped Co3O4 nanoparticles demonstrate size‐dependent electrochemical activity and exhibit very high catalytic activity with a current density of up to 11.5 A cm−2 at 1.92 V (vs. RHE), and a turnover frequency of 532±100 s−1 at 1.92 V (vs. RHE) towards catalyzing the oxygen evolution reaction., A SEM‐controlled micromanipulator technique is proposed to pick single Co3O4 nanoparticles and place them on a modified carbon nanoelectrode surface. The obtained nanoassembly allows to extract the intrinsic oxygen evolution activity of the nanoparticle at industrially relevant current density devoid of film and ensemble effects. Post‐electrochemistry TEM analyses offer insight into structural transformations during electrocatalysis.

In battery research, the development of analytical techniques is of key importance for determining intrinsic properties of active materials ultimately dictating the battery performance. We report the application of nano-impact electrochemistry to gain insight into the intrinsic properties of commercial battery materials i.e. TiO2 particles in non-aqueous media. Potentiostatic lithiation measurements do not only provide qualitative information about the rate-limiting step in the lithiation process, but also demonstrate that nano-impact electrochemistry is a suitable technique in non-aqueous media in complete absence of oxygen and water. Our results reveal that the intrinsic lithiation rate of individual TiO2 particles is not – as generally assumed – determined by interfacial ion transfer kinetics, mobility of ion and/or electrons in the bulk of the particle, but by the solid-solid electron transfer. These findings have important implications for future studies of fundamental properties of battery materials considering that charge transfer in battery electrodes does not always obey Butler-Volmer kinetics.

The development of bifunctional oxygen electrodes is a key factor for the envisaged application of rechargeable metal-air batteries. In this work, we present a simple procedure based on pyrolysis of polybenzoxazine/metal metalloid nanoparticles composites into efficient bifunctional oxygen reduction and oxygen evolution electrocatalysts. This procedure generates nitrogen-doped carbon with embedded metal metalloid nanoparticles exhibiting high activity towards both, oxygen reduction and oxygen evolution, in 0.1 M KOH with a roundtrip voltage of as low as 0.81 V. Koutecký-Levich analysis coupled with scanning electrochemical microscopy reveals that oxygen is preferentially reduced in a 4e− transfer pathway to hydroxide rather than to hydrogen peroxide. Furthermore, the polybenzoxazine derived carbon matrix allows for stable catalyst fixation on the electrode surface, resulting in unattenuated activity during continuous alternate polarisation between oxygen evolution at 10 mA cm−2 and oxygen reduction at −1.0 mA cm−2.

Enzymes are characterized by an active site that is typically embedded deeply within the protein shell thus creating a nanoconfined reaction volume in which high turnover rates occur. We propose nanoparticles with etched substrate channels as a simplified enzyme mimic, denominated nanozymes, for electrocatalysis. We demonstrate increased electrocatalytic activity for the oxygen reduction reaction using PtNi nanoparticles with isolated substrate channels. The PtNi nanoparticles comprise an oleylamine capping layer that blocks the external surface of the nanoparticles participating in the catalytic reaction. Oxygen reduction mainly occurs within the etched channels providing a nanoconfined reaction volume different from the bulk electrolyte conditions. The oxygen reduction reaction activity normalized by the electrochemically active surface area is enhanced by a factor of 3.3 for the nanozymes compared to the unetched nanoparticles and a factor of 2.1 compared to mesoporous PtNi nanoparticles that possess interconnecting pores.

The determination of the intrinsic properties of nanomaterials is essential for their optimization as electrocatalysts, however it poses great challenges from the standpoint of analytical tools and methods. Herein, we report a novel methodology that allows for a binder-free investigation of electrocatalyst nanoparticles. The potential-assisted immobilization of a non-noble metal catalyst, i.e., nickel-iron layered double hydroxide (NiFe LDH) nanoparticles, was employed to directly attach small nanoparticle ensembles from a suspension to the surface of etched carbon nanoelectrodes. The dimensions of this type of electrodes allowed for the immobilization of the catalyst material below the picogram scale and resulted in a high resolution towards the faradaic current response. In addition the effect of the electrochemical aging on the intrinsic activity of the catalyst was investigated in alkaline media by means of continuous cyclic voltammetry. A change in the material properties could be observed, which was accompanied by a substantial decrease in its intrinsic activity.

The quantitative characterisation of electrocatalytic properties of nanoparticle catalyst materials is so far only performed for layers typically comprising additionally conducting additives and binders. We propose a method enabling the evaluation of intrinsic catalytic activity of nanoparticles based on the diffusion-limited steady-state current. In a step-after-step process, the influence of coverage on kinetic and diffusion limited current is evaluated to highlight the challenges of sub-monolayer electroanalysis. Conclusions are used to point out strategies and their limitations for qualitative and quantitative comparison of intrinsic catalytic properties. Particularly, the impact of coverage, electrode geometry, altered diffusion profile for nanoparticles and the catalyst activity and selectivity are discussed. Fundamental information about electrochemical sub-monolayer nanoparticle analysis is provided.

Mo-doped BiVO

A rapid and reliable nanofabrication route produces electrodes with beneficial properties for electrochemistry based on stochastic nanoparticle collision events. Carbon nanoelectrodes are etched to expose conical carbon tips which present an increased surface area for the detection of nanoparticle impacts. The tuneable electrode size as well as the conical geometry allow to increase the observed particle impact frequency while maintaining low background noise. Moreover, anodic particle coulometry for the sizing of silver nanoparticles shows that the detected impacts are representative of the polydisperse particle population. Keywords: Nanoelectrodes, HF etching, Particle impact electrochemistry, Particle size distribution, Ag nanoparticles

Determination of the intrinsic electrocatalytic activity of nanomaterials by means of macroelectrode techniques is compromised by ensemble and film effects. Here, a unique "particle on a stick" approach is used to grow a single metal-organic framework (MOF; ZIF-67) nanoparticle on a nanoelectrode surface which is pyrolyzed to generate a cobalt/nitrogen-doped carbon (CoN/C) composite nanoparticle that exhibits very high catalytic activity towards the oxygen evolution reaction (OER) with a current density of up to 230 mA cm-2 at 1.77 V (vs. RHE), and a high turnover frequency (TOF) of 29.7 s-1 at 540 mV overpotential. Identical location transmission electron microscopy (IL-TEM) analysis substantiates the "self-sacrificial" template nature of the MOF, while post-electrocatalysis studies reveal agglomeration of Co centers within the CoN/C composite during the OER. "Single-entity" electrochemical analysis allows for deriving the intrinsic electrocatalytic activity and furnishes insight into the transient behavior of the electrocatalyst under reaction conditions.

International audience

NiFe layered double hydroxide (LDH) is inarguably the most active contemporary catalyst for the oxygen evolution reaction under alkaline conditions. However, the ability to sustain unattenuated performance under challenging industrial conditions entailing high corrosivity of the electrolyte (≈30 wt. % KOH), high temperature (>80 °C) and high current densities (>500 mA cm-2 ) is the ultimate criterion for practical viability. This work evaluates the chemical and structural stability of NiFe LDH at conditions akin to practical electrolysis, in 30 % KOH at 80 °C, however, without electrochemical polarization, and the resulting impact on the OER performance of the catalyst. Post-analysis of the catalyst by means of XRD, TEM, FT-IR, and Raman spectroscopy after its immersion into 7.5 m KOH at 80 °C for 60 h revealed a transformation of the structure from NiFe LDH to a mixture of crystalline β-Ni(OH)2 and discrete predominantly amorphous FeOOH containing minor non-homogeneously distributed crystalline domains. These structural and compositional changes led to a drastic loss of the OER activity. It is therefore recommended to study catalyst stability at industrially relevant conditions.

In operando SECM is employed to monitor the evolution of the electrically insulating character of a Si electrode surface during (de-)lithiation. The solid-electrolyte interface (SEI) formed on Si electrodes is shown to be intrinsically electrically insulating. However, volume changes upon (de-)lithiation lead to the loss of the protecting character of the initially formed SEI.

In article number https://doi.org/10.1002/advs.201801029, Kolleboyina Jayaramulu, Justus Masa, Wolfgang Schuhmann, Roland A. Fischer, and co‐workers report simple and facile synthesis of cobalt‐based 2D zeolite imidazole framework nanosheets [Co‐ZIF‐9(III)] by mechano‐chemical grinding with subsequent liquid‐phase exfoliation. The resultant 2D material exhibits highly efficient oxygen evolution reaction (OER) activity under alkaline conditions, attributed to increased accessibility of redox‐active cobalt oxyhydroxide active sites with a nitrogen coordination environment N4CoOOH, and efficiently mimics Co‐Porphyrin electrocatalysts.

International audience; In the scope of improving the energy and power densities of electrochemical double layer capacitors (EDLCs), the development of high performance electrolytes with enhanced operative voltages is imperative. The formulation of mixtures containing ionic liquids with organic molecular solvents is an important strategy in the pursuit of developing highly electrochemically stable and safe materials while retaining fast transport properties for high power applications. In this work, we report on the physical–chemical investigations into binary mixtures containing the ionic liquid 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide with one mononitrile solvent, butyronitrile, and two dinitrile solvents, glutaronitrile and adiponitrile, as potential electrolytes for EDLCs. The thermal, volumetric, and transport properties of the binary mixtures are investigated as functions of the electrolyte composition and temperature. Furthermore, the electrolyte composition which exhibits the highest conductivity for each of the binary mixtures was determined, and its electrochemical stability is reported using a glassy carbon macrodisk electrode.

2D layered materials, including metal‐di‐chalcogenides and transition metal layered double hydroxides, among others, are intensively studied because of new properties that emerge from their 2D confinement, which are attractive for advanced applications. Herein, 2D cobalt ion (Co2+) and benzimidazole (bIm) based zeolite‐imidazole framework nanosheets, ZIF‐9(III), are reported as exceptionally efficient electrocatalysts for the oxygen evolution reaction (OER). Specifically, liquid‐phase ultrasonication is applied to exfoliate a [Co4(bIm)16] zeolite‐imidazole framework (ZIF), named as ZIF‐9(III) phase, into nanoscale sheets. ZIF‐9(III) is selectively prepared through simple mechanical grinding of cobalt nitrate and benzimidazole in the presence of a small amount of ethanol. The resultant exfoliated nanosheets exhibit significantly higher OER activity in alkaline conditions than the corresponding bulk phases ZIF‐9 and ZIF‐9(III). The electrochemical and physicochemical characterization data support the assignment of the OER activity of the exfoliated nanosheet derived material to nitrogen coordinated cobalt oxyhydroxide N4CoOOH sites, following a mechanism known for Co‐porphyrin and related systems. Thus, exfoliated 2D nanosheets hold promise as potential alternatives to commercial noble metal electrocatalysts for the OER.

Electrochemical double layer capacitors (EDLCs), also known as supercapacitors, are promising energy storage devices, especially when considering high power applications [1]. EDLCs can be charged and discharged within seconds [1], feature high power (10 kW·kg-1) and an excellent cycle life (>500,000 cycles). All these properties are a result of the energy storage process of EDLCs, which relies on storing energy by charge separation instead of chemical redox reactions, as utilized in battery systems. Upon charging, double layers are forming at the electrode/electrolyte interface consisting of the electrolyte’s ions and electric charges at the electrode surface. In state-of-the-art EDLC systems activated carbons (AC) are used as active materials and tetraethylammonium tetrafluoroborate ([Et4N][BF4]) dissolved in organic solvents like propylene carbonate (PC) or acetonitrile (ACN) are commonly used as the electrolyte [2]. These combinations of materials allow operative voltages up to 2.7 V - 2.8 V and an energy in the order of 5 Wh·kg-1[3]. The energy of EDLCs is dependent on the square of the operative voltage, thus increasing the usable operative voltage has a strong effect on the delivered energy of the device [1]. Due to their high electrochemical stability, ionic liquids (ILs) were thoroughly investigated as electrolytes for EDLCs, as well as, batteries, enabling high operating voltages as high as 3.2 V - 3.5 V for the former [2]. While their unique ionic structure allows the usage of neat ILs as electrolyte in EDLCs, ILs suffer from low conductivity and high viscosity increasing the intrinsic resistance and, as a result, a lower power output of the device. In order to overcome this issue, the usage of blends of ionic liquids and organic solvents has been considered a feasible strategy as they combine high usable voltages, while still retaining good transport properties at the same time. In our recent work the ionic liquid 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide ([Pyrr14][TFSI]) was combined with two nitrile-based organic solvents, namely butyronitrile (BTN) and adiponitrile (ADN), and the resulting blends were investing regarding their usage in electrochemical double layer capacitors [4,5]. Firstly, the physicochemical properties were investigated, showing good transport properties for both blends, which are similar to the state-of-the-art combination of [Et4N][BF4] in PC. Secondly, the electrochemical properties for EDLC application were studied in depth revealing a high electrochemical stability with a maximum operative voltage as high as 3.7 V. In full cells these high voltage organic solvent based electrolytes have a good performance in terms of capacitance and an acceptable equivalent series resistance at cut-off voltages of 3.2 and 3.5 V. However, long term stability tests by float testing revealed stability issues when using a maximum voltage of 3.5 V for prolonged time, whereas at 3.2 V no such issues are observed (Fig. 1). Considering the obtained results, the usage of ADN and BTN blends with [Pyrr14][TFSI] in EDLCs appears to be an interesting alternative to state-of-the-art organic solvent based electrolytes, allowing the usage of higher maximum operative voltages while having similar transport properties to 1 mol∙dm-3 [Et4N][BF4] in PC at the same time. References [1] P. Simon and Y. Gogotsi, Nat. Mater., 2008, 7, 845-854. [2] F. Béguin, V. Presser, A. Balducci and E. Frackowiak, Adv. Mater., 2014, 26, 2219-2251. [3] J. R. Miller and A. F. Burke, Electrochem. Soc. Interface, 2008, 17, 53-57. [4] A. R. Neale, C. Schütter, P. Wilde, P. Goodrich, C. Hardacre, S. Passerini, A. Balducci and J. Jacquemin submitted [5] C. Schütter, A. R. Neale, P. Wilde, P. Goodrich, C. Hardacre, S. Passerini, J. Jacquemin and A. Balducci submitted Figure 1

Enzymes can perform complex multistep cascade reactions by linking multiple distinct catalytic sites via substrate channeling. We mimic this feature in a generalized approach with an electrocatalytic nanoparticle for the carbon dioxide reduction reaction comprising a Ag core surrounded by a porous Cu shell, providing different active sites in nanoconfined volumes. The architecture of the nanozyme provides the basis for a cascade reaction, which promotes C−C coupling reactions. The first step occurs on the Ag core, and the subsequent steps on the porous copper shell, where a sufficiently high CO concentration due to the nanoconfinement facilitates C−C bond formation. The architecture yields the formation of n-propanol and propionaldehyde at potentials as low as −0.6 V vs RHE.