Search

This study optimized subcritical water extraction (SWE) conditions to maximize pectin yield from cocoa pod husk (CPH) and compared the characteristics of CPH pectin extracted through SWE with those of CPH pectin obtained through conventional extraction (CE) with citric acid. The Box-Behnken experimental design was employed to optimize SWE and examine the influence of process parameters, including temperature (100 °C-120 °C), extraction time (10-30 min), and solid:liquid ratio (SLR) (1:30-2:30 g/mL), on pectin yield. The maximum pectin yield of 6.58% was obtained under the optimal extraction conditions of 120 °C for 10 min with 1:15 g/mL SLR and closely corresponded with the predicted value of 7.29%. Compared with CE, SWE generated a higher yield and resulted in a higher degree of esterification, methoxyl content, and anhydrouronic acid value but a lower equivalent weight. The extracted pectin was pure, had low-methoxyl content, and similar melting and degradation temperatures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this work we developed an eco-friendly valorisation of Citrus wastes (CWs), through a solvent-assisted ultrasonication extraction technique, thus having access to a wide range of bio-active compounds and polysaccharides, extremely useful in different industrial sectors (food, cosmetics, nutraceutical). Water-based low-amplitude ultrasonication was examined as a potential method for pectin extraction as well as polar and non-polar citrus extractives (CEs), among which hesperidin and triglycerides of 18 carbon fatty acids were found to be the most representative ones. In addition, citric acid:glycerol (1:4)-based deep eutectic solvent (DES) in combination with ultrasonic extraction was utilized to extract microcellulose (CMC), from which stable cellulose nanocrystals (CNCs) with glycerol-assisted high amplitude ultrasonication were obtained. The physical and chemical properties of the extracted polysaccharides (pectin, micro and nanocellulose) were analysed through DLS, ζ-potential, XRD, HP-SEC, SEM, AFM, TGA-DSC, FTIR, NMR, and PMP-HPLC analyses. The putative structure of the extracted citrus pectin (CP) was analysed and elucidated through enzyme-assisted hydrolysis in correlation with ESI-MS and monosaccharide composition. The developed extraction methods are expected to influence the industrial process for the valorisation of CWs and implement the circular bio-economy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

How to solve the contradiction between the efficiency and adsorption rate of porous materials in adsorbing pollutants has always been one of the focus issues. In this study, the small landscape cypress trees structure like biomimetic of a hierarchical and dual morphology 3D porous HA-based aerogel was designed and synthesized to use humic acid (HA), pectin (PE) and chitosan (CTS) as raw materials, which it was formed by the disorderly overlapping of lamella composed of fiber networks in 3D space. Due to its special microstructure, it can be used like separation membrane, which allowing for rapid adsorption of pollutants in the water while the water flow passes through quick. In general, this work provides a new concept for owning fast adsorption rate and efficient adsorption of porous materials of preparation to use green method., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The effects of electron beam irradiation (EBI) pretreatment on the alkaline extraction of pectic polysaccharides from Diaphragma juglandis fructus (DJF) are highly dependent on the irradiation dosage. Comprehensive characterizations encompassing physicochemical, structural, and functional properties were conducted on crude pectic polysaccharide extract from DJF subjected to various EBI doses. EBI pretreatment significantly increased the yields of crude pectic polysaccharides extract (increasing by 41.89 %), also facilitating the extraction of uronic acid, RG-I structure, and protein content, despite causing a decrease in total sugar content. EBI pretreatment induced the degradation of pectin, resulting in decreased molecular weight, particle size, crystallinity, viscosity, thermal stability, and water holding capacity, while enhancing solubility and oil holding capacity. Variations in physicochemical and structural properties induced by different EBI doses influenced the functional activities of DJF pectic polysaccharides. Low-dose EBI (at 5 kGy) pretreatment markedly improved the emulsifying activity/stability (increasing by 20.82/74.10 %) and ABTS/DPPH radical scavenging activity (increasing by 27.91/12.40 %), whereas high-dose EBI pretreatment (50 kGy) greatly enhanced foaming capacity/stability (increasing by 259.99/175.56 %). These findings provide a novel regulatory strategy for the functional activity of pectic polysaccharides., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The high polysaccharide content of Lycii fructus agri-food waste should be reclaimed for value liberation from both environmental and economic perspectives. In this study, waste from L. fructus pigment products was valorized on a bench scale by upcycling into active polysaccharide-rich extracts. The methodological feasibility of polysaccharide recovery from L. fructus waste was evaluated using sequential extraction techniques. Three fractions LFP-30, LFP-100, and LFP-121, were obtained under stepwise increases in temperature and pressure. Highly heterogeneous xyloglucan (XG)-pectin macromolecules composed of linear homogalacturonan (HG) and alternating intra-RG-I-linkers, with topological neutral branches and XG participation, were predominant among the L. fructus polysaccharides (LFPs). Antioxidant activities in LFPs were unaffected by waste resources and severe extraction methodology conditions. Additionally, the direct investment potential of polysaccharide recovery was evaluated for full-scale implementation. This study demonstrated the necessity and feasibility of extracting bioactive polysaccharides with potential applications from L. fructus waste, and provided a sustainable strategy for transforming L. fructus waste disposal problems into value-added products using cost-effective methodologies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Pectic polysaccharides have long been a challenging subject of research in the field of macromolecular science, given their complex structures and wide range of biological effects. However, the extensive exploration of pectic polysaccharides has been limited due to the intricacy of their structures. In this comprehensive review, we aim to provide a thorough summary of the existing knowledge on pectic polysaccharides, with a particular focus on aspects such as classification, extraction methodologies, structural analysis, elucidation of biological activities, and exploration of target molecules and signaling pathways. By conducting a comprehensive analysis of existing literature and research achievements, we strive to establish a comprehensive and systematic framework that can serve as a reference and guide for further investigations into pectic polysaccharides. Furthermore, this review delves into the applications of pectic polysaccharides beyond their fundamental attributes and characteristics, exploring their potential in fields such as materials, food, and pharmaceuticals. We pay special attention to the promising opportunities for pectic polysaccharides in the pharmaceutical domain and provide an overview of related drug development research. The aim of this review is to facilitate a holistic understanding of pectic polysaccharides by incorporating multifaceted research, providing valuable insights for further in-depth investigations into this significant polymer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

To facilitate the application of rhamnogalacturonan-I (RG-I)-enriched pectins (RGPs) as novel, healthy, and gelling food additives, this study compared the structural characteristics and gelling properties of RGPs extracted from citrus peel via four methods (alkali: AK, high-temperature/pressure: TP, citric acid: CA, and enzyme-assisted: EA extractions). AK and CA yielded pectins with the highest RG-I proportions (54.8 % and 51.9 %, respectively) by disrupting the homogalacturonan region; TP and EA increased the RG-I proportions by ~10 %. Among the four methods, AK induced the lowest degree of esterification (DE) (6.7 %) and longer side chains that form strong entanglement, contributing to its highest gel hardness. The relatively low DE (18.5 %) of CA RGP facilitated stable gel formation. Notably, its highly branched RG-I region afforded more intramolecular hydrophobic interactions, making a more highly cross-linked gel network of better gel resilience. In contrast, TP induced the highest DE (57 %) and curved molecular chains; it inhibited Ca 2+ binding, entanglement, and intramolecular hydrophobic interactions, and thus no gel formed. EA RGP was associated with the lowest molecular size, rendering it more difficult for Ca 2+ to form links, which resulted no gel. These findings offer insights into the relationship among the extraction methods, molecular structures, and gelling properties of RGPs., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study aimed to isolate Ulva pertusa polysaccharide (UPP), which elicits anti-inflammatory bowel disease (IBD) effects, from the Korea seaweed U. pertusa and identify its structure. Firstly, UPP was isolated from U. pertusa using hydrothermal extraction and ethanol precipitation. UPP is a novel polysaccharide that exhibits unique structural features such as 3-sulfated rhamnose, glucuronic acid, iduronic acid, and 3-sulfated xylose, which are repeated in 1,4-glycosidic bonds. Prophylactic oral administration of UPP in mice with dextran sulfate sodium (DSS)-induced ulcerative colitis (UC) suppressed the levels of inflammatory cytokines and MAPK- and NF-κB-related factors in the serum and colon tissue. Tight junction (TJ)-related factors such as occludin, claudin-1, and mucin were effectively augmented by UPP in the colon tissue. In addition, UPP administration prevented the DSS treatment-led cecal short chain fatty acid imbalance, and this effect was most evident for propionic acid. In conclusion, UPP isolated from the Korean U. pertusa demonstrates potent anti-IBD activity. Characterization of this ulvan revealed its unique structure. Moreover, its efficacy may be associated with its anti-inflammatory effects and regulation of gut microbiota and TJ proteins. Thus, this study provides new insights into the biological effects of UPP in IBD., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest with respect to the work described in this manuscript., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This work demonstrates that sesame (Sesamum indicum L.) hull, an unexploited food industrial waste, can be used as an efficient source for the extraction of hemicellulose and/or pectin polysaccharides to further obtain functional oligosaccharides. Different polysaccharides extraction methods were surveyed including alkaline and several enzymatic treatments. Based on the enzymatic release of xylose, arabinose, glucose, and galacturonic acid from sesame hull by using different enzymes, Celluclast®1.5 L, Pectinex®Ultra SP-L, and a combination of them were selected for the enzymatic extraction of polysaccharides at 50 °C, pH 5 up to 24 h. Once the polysaccharides were extracted, Ultraflo®L was selected to produce arabinoxylo-oligosaccharides (AXOS) at 40 °C up to 24 h. Apart from oligosaccharides production from extracted polysaccharides, alternative approaches for obtaining oligosaccharides were also explored. These were based on the analysis of the supernatants resulting from the polysaccharide extraction, alongside a sequential hydrolysis performed with Celluclast®1.5 L and Ultraflo®L of the starting raw sesame hull. The different fractions obtained were comprehensively characterized by determining low molecular weight carbohydrates and monomeric compositions, average Mw and dispersity, and oligosaccharide structure by MALDI-TOF-MS. The results indicated that sesame hull can be a useful source for polysaccharides extraction (pectin and hemicellulose) and derived oligosaccharides, especially AXOS., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Fig fruit is widely accepted in warm and tropical regions due to the sweet taste and health benefits. The polysaccharides in fig fruit are responsible for the health benefits. However, information regarding polysaccharide structure remains limited. In this study, the water-soluble polysaccharides (FFP) were extracted from fig fruit with a yield of 15.3 mg/g. Anion exchange chromatography and gel permeation chromatography were used for purification. A leading polysaccharide was purified and characterized as below. The monosaccharide composition of FFP included arabinose (Ara), galactose (Gal), galacturonic acid (GalA) and rhamnose (Rha). The glycosidic linkages were revealed to be L-Ara-(1→, →5)-L-Ara-(1→, →2,4)-L-Rha-(1→, →2)-L-Rha-(1→, →4)-D-Gal-(1→ and D-Gal-(1 → . Nuclear magnetic resonnance (NMR) spectra revealed that FFP had →4)-α-D-GalpA-(1 → 2)-α-L-Rhap-(1→ as backbone. The side chains included Galp-β-D-(1 → 4)-Galp-β-D-(1 → 4)-Galp-β-D-(1 → 4)-Galp-β-D-(1→ and α-L-Araf-(1 → 5)-α-L-Araf-(1 → . They were linked to C-4 of Rhap. FFP inhibited the production of NO, IL-6 and IL-1β levels induced by LPS. IL-6 and IL-1β levels were returned to normal. These information are helpful to understand this functional fruit., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Saussurea laniceps is a traditional medicinal herb. In our previous study, a pectin polysaccharide, SLP-4, was isolated from the petals of S. laniceps. In this study, the immunomodulatory activity of SLP-4 was studied by analyzing its effects on macrophage (RAW 264.7 cells) polarization. The immunomodulatory activity assays indicated that SLP-4 could significantly enhance the pinocytic and phagocytic capacity and promote the expression and secretion of cytotoxic molecules (nitric oxide, increased by 6.4 times when the SLP-4 concentration was 800 μg/mL) and cytokines (tumor necrosis factor-α and interleukin-6 increased by 7.7 and 11.9 times, respectively) in original macrophage. The possible mechanism could be attributed to the activation of the mitogen-activated protein kinase and nuclear factor-κB signaling pathways through Toll-like receptors 2 and 4. Moreover, SLP-4 significantly induced M1 polarization of original macrophages and transferred macrophages from M2 to M1, but had little effect on the conversion of M1 macrophages into M2 phenotype. Overall, these results demonstrate the potential of SLP-4 as an attractive immunomodulating functional supplement., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study aimed to investigate the structural characteristics and intracellular mechanisms of polysaccharides (MP-PE-I) purified from a crabapple (Malus prunifolia) enzymatic hydrolysate (MP-PE). Activity-guided fractionation revealed that MP-PE-I was the active moiety and significantly reduced the production and gene expression of pro-inflammatory factors in interleukin (IL)-1β-treated intestinal epithelial cells (Caco-2). Moreover, MP-PE-I downregulated the phosphorylation and nuclear localization of proteins involved in the mitogen-activated protein kinase (MAPK) and nuclear factor-κB (NF-κB) pathways, as evidenced by immunoblotting and immunofluorescence analysis. In antagonistic studies with specific inhibitors of the MAPK and NF-κB pathways, IL-6 inhibition was significantly regulated by p38; IL-8 by IκBα, JNK, and p38; and monocyte chemoattractant protein-1 (MCP-1) by JNK, p38, and ERK. Additionally, MP-PE-I significantly decreased the mRNA and protein expression of IL-1 receptor type 1. Chemical and structural characteristic analyses showed that MP-PE-I is a polysaccharide rich in rhamnogalacturonan (RG)-I and plays a crucial role in intestinal immunomodulation. To our knowledge, this is the first study to demonstrate the intestinal immunomodulatory activity, intracellular mechanisms, and structural characteristics of RG-I-rich polysaccharides isolated from crabapples., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Pectin was extracted from red dragon fruit (Hylocereus polyrhizus) peel using two different extraction methods: subcritical water extraction (SCWE) and conventional acid extraction (AE), from two different types of peels, fresh peel puree and dried peel powder. SCWE method on fresh peel puree showed an ∼18.88 % increase in pectin yield compared to AE. Extracted pectin is classified as low methoxyl pectin (DE: 8.51-50.64 %), with an average molecular weight ranging from 115.23 kDa to 577.84 kDa and a Gal-A content of 44.09 % - 53.90 %. The potential of pectin from fresh peel puree to be applied as a biodegradable film was further explored. Different pectin concentrations (3-5 % w/v) were used to prepare the films. Regarding the film performance, PF-S5, which was produced from SCWE with 5 % of pectin concentration, exhibits better thermal stability (T dmax 250 °C, residue of 28.69 %) and higher moisture barrier (WVP 5.59 × 10 -11 g.cm -1 .s -1 .Pa -1 ). In comparison, PF-A showed lower water solubility (45.14-69.15 %), higher water contact angle (33.01° - 44.35°), and better mechanical properties (TS: 2.12-4.11 MPa, EB: 48.72-61.39 %). Higher molecular weight accompanied by higher DE and Gal-A content contributes to better pectin film properties., Competing Interests: Declaration of competing interest The authors declare no competing financial interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This work investigated a sustainable and efficient approach of pectin extraction for banana peel waste valorisation and studied the influence of banana ripening stages (RS at 2,5 and 7). Although pectin content in banana peel raw material decreased during ripening, pectin extraction was favoured. The highest alcohol-insoluble solids (AIS) yield (12.5%) was achieved at 70 °C, 15 mins from RS 7 peel. All extracts were homogalacturan-rich with some rhamnogalacturonan-I content (showing HGA/RG-I ratio > 2) with varied degree of methylation (DM). The highest HGA content (837.2 mg/g AIS) and HGA/RG-I ratio (9.9) were achieved at 110 °C, 0 mins from RS 7, suggesting its promising application as gelling agent. The highest RG-I content (111.1 mg/g AIS) were obtained at 110 °C, 5 mins from RS 7, which was comparable with the pectin with reported prebiotic ability isolated from the literature, suggesting its potential application in novel products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Background: This study aimed to address the significant challenges associated with agricultural and cocoa waste disposal within the context of global food waste concerns. The magnitude of global food waste is staggering, estimated at 1.6 Gt of primary product equivalents, with 1.3 Gt attributed specifically to the edible parts of food. Focusing on cocoa waste, which constitutes around 80% of total cocoa production, management poses a considerable environmental challenge, with over 60% of this waste either burnt or left to rot in plantations., Method: Ultrasound-assisted extraction of pectin from cocoa pulp mucilage (CPM), cocoa pod husk (CPH), and cocoa bean shell (CBS) was achieved with a central composite design (CCD) using response surface methodology (RSM)., Results: Ultrasound-assisted extraction takes into consideration independent factors such as temperature, sonication time, pH, solid-liquid ratio, and ultrasonic power intensity. This study achieved the highest yield, anhydrouronic acid content, and degree of esterification under optimum conditions - sonication time of 20 min, pH of 2.5, solid-solvent ratio of 1:40 g mL -1 , and ultrasonic power intensity of 64 W cm -2 . The composition and characterization of pectin showed that its anhydrouronic acid content was 68.59 ± 0.2% when extracted from CPH, 50.7 ± 0.5% when extracted from CBS, and 43.97 ± 0.17% when extracted from CPM with citric acid., Conclusion: This study underscored the potential to reduce the environmental impact of cocoa waste, offering improved pectin extraction and sustainable methods for handling agricultural by-products. It is relevant for individuals interested in waste reduction and resource efficiency within the broader agricultural industry, showcasing the potential for practical and sustainable solutions in cocoa waste management. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Pectin is a natural polymer that is found in the cell walls of higher plants. This study presents a comprehensive analysis of pectin extracted from lemon in two different geographic regions (Peddie and Fort Beaufort) in two consecutive years (2023 and 2024) named PP 2023, PP 2024, FBP 2023, and FBP 2024. The dried lemon peels were ground into a powder, sifted to obtain particles of 500 μm, and then subjected to pectin extraction using a conventional method involving mixing lemon peel powder with distilled water, adjusting the pH level to 2.0 with HCl, heating the mixture at 70 °C for 45 min, filtering the acidic extract, and precipitating pectin with ethanol. The yield of these pectin samples was statistically significant, as FBP 2024 had a maximum yield of 12.2 ± 0.02%, PP 2024 had a maximum yield of 13.0 ± 0.02%, FBP 2023 had a maximum yield of 12.2 ± 0.03%, and PP 2023 had a maximum yield of 13.1 ± 0.03%, The variation in yield could be due to the differences in the growing conditions, such as the climate and soil, which could have affected the pectin content in the lemons. The physicochemical characterization of all samples proved that our pectin samples could be used in the pharmaceutical and food industries, with anhydrouronic acid content which was greater than 65%, as suggested by the FAO. The scanning electron microscope analysis of all extracted pectin was rough and jagged, while the commercial pectin displayed a smooth surface morphology with a consistent size. FTIR confirmed the functional groups which were present in our samples. Thermogravimetric analysis was employed to investigate the thermal behavior of the extracted pectin in comparison with commercial pectin. It was found that the extracted pectin had three-step degradation while the commercial pectin had four-step degradation. Additionally, pectin samples have been shown to have antioxidants, as the IC 50 of PP 2024, PP 2023, FBP 2023, FBP 2024, and Commercial P was 1062.5 ± 20.0, 1201.3 ± 22.0, 1304.6 ± 19.0, 1382.6 ± 29.9, and 1019.4 ± 17.1 mg/L, respectively. These findings indicate that lemon pectin has promising characteristics as a biopolymer for use in biomedical applications.

A novel RG-I pectin-like polysaccharide, YJ3A1, was purified from the flowers of Rosa chinensis and its structure and hepatoprotective effect in vivo and in vitro were investigated. The backbone of this polysaccharide is mainly composed of 1, 4-galactan, 1, 4-linked α-GalpA and 1, 2-linked α-Rhap disaccharide repeating unit attached by 1, 6-linked β-Galp or 1, 5-linked α-Araf on C-4 of the Rhap. Interestingly, oral administration of YJ3A1 significantly ameliorates NASH-associated inflammation, oxidative stress and fibrosis and does not affect the liver morphology of normal mice at a dose of 50 mg/kg. The mechanism study suggests that the biological activity may associate to inactivating of high-mobility group box 1 protein (HMGB1)/TLR4/NF-κB and Akt signaling pathways by restraining the expression and release of HMGB1, thereby impeding the effect of NASH. The current findings outline a novel leading polysaccharide for new drug candidate development against NASH., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The pectin was extracted using H 2 SO 4 , HNO 3 , and HCl from the pulp of four coffee varieties (Harar, Sidama, Jimma, and Guji) collected from different regions of Ethiopia. The effect of extraction temperature, time, solid-to-liquid ratio, types of acid and coffee varieties on the physiochemical properties and yield of pectin were studied. A maximum pectin yield, which was 12.7 %, was obtained from Harar coffee pulp treated with H 2 SO 4 . The equivalent weight of the extracted pectin varied from 1111 to 1667 g/mol. The methoxyl contents of the extracted pectin ranged from 4.23 to 7.13 %. The degrees of esterification and anhydrouronic acid of the pectin ranged from 53 to 68.5 % and 35.5 to 68.8 %, respectively. The results show the yield and physiochemical properties of the coffee pulp pectin depend on extraction parameters, acid types, and coffee varieties. Moreover, the pectin extracted from coffee pulp showed strong gelling properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: The pectin from Ficus carica Linn. (fig) peels is a valuable and recyclable constituent that may bring huge economic benefits. To maximize the utilization of this resource, deep eutectic solvent (DES)-assisted extraction was applied to extract pectin from fig peels, and the extraction process was optimized with response surface methodology., Results: When DES (choline chloride/oxalic acid = 1:1) content was 168.1 g kg -1 , extraction temperature was 79.8 °C, liquid-solid ratio was 23.3 mL g -1 , and extraction time was 120 min, the maximum yield of 239.6 g kg -1 was obtained, which was almost twice the extraction of hot water. DES-extracted fig peel pectin (D-FP) exhibited better nature than hot water-extracted fig peel pectin (W-FP) in terms of uronic acid content, particle size distribution, and solubility, but lower molecular weight and esterification degree. D-FP and W-FP had similar infrared spectra and thermodynamic peaks but differed in monosaccharide compositions. D-FP also showed good antioxidant capacities and exhibited better functional activities than W-FP., Conclusion: These results indicated that D-FP was of promising quality being utilized in food or medical industries and the optimal DES-assisted extraction method might be applied as a sustainable process for the effective extraction of bioactive pectin from fig peels with the excellence of low equipment requirements and simple operation. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Cellulose nanofibers, a sustainable and promising material with widespread applications, exhibit appreciable strength and excellent mechanical and physicochemical properties. The preparation of cellulosic nanofibers from food or agricultural residue is not sustainable. Therefore, this study was designed to use three halophytic plants (Cressa cretica, Phragmites karka, and Suaeda fruticosa) to extract cellulose for the subsequent conversion to cellulosic nanofibers composites. The other extracted biomass components including lignin, hemicellulose, and pectin were also utilized to obtain industrially valuable enzymes. The maximum pectinase (31.56 IU mL -1 ), xylanase (35.21 IU mL -1 ), and laccase (15.89 IU mL -1 ) were produced after the fermentation of extracted pectin, hemicellulose, and lignin from S. fruticosa, P. karka, and C. cretica, respectively. Cellulose was methylated (with a degree of substitution of 2.4) and subsequently converted into a composite using polyvinyl alcohol. Scanning electron microscopy and Fourier-transform infrared spectroscopy confirmed the successful synthesis of the composites. The composites made up of cellulose from C. cretica and S. fruticosa had a high tensile strength (21.5 and 15.2 MPa) and low biodegradability (47.58% and 44.56%, respectively) after dumping for 3 months in soil, as compared with the composite from P. karka (98.79% biodegradability and 4.9 MPa tensile strength). Moreover, all the composites exhibited antibacterial activity against gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) and gram-positive bacteria (Staphylococcus aureus). Hence, this study emphasizes the possibility for various industrial applications of biomass from halophytic plants., (© 2024 Wiley Periodicals LLC.)

Ultrasound has been widely used in industry due to its high energy and efficiency. This study optimized the ultrasonic-assisted extraction (UAE) process of frosted figs pectin (FFP) using response surface methodology (RSM), and further investigated the effect of ultrasonic power on the structural characteristics and antioxidant activities of FFPs. The UAE method of FFP through RSM was optimized, and the optimal extraction process conditions, particle size of 100 mesh, pH value of 1.95, liquid-solid ratio of 47:1 (mL/g), extraction temperature of 50 °C and extraction time of 65 min, were obtained. The extraction rate of FFP under this condition was 37.97 ± 2.56 %. Then, the four FFPs modified by ultrasound were obtained by changing the ultrasonic power. Research had found that ultrasonic power had little effect on the monosaccharide composition, Zeta potential, as well as the thermal stability and appearance structure of the four FFPs. However, ultrasonic power had a significant impact on other properties of FFP: as the ultrasonic power increased, the DM% and particle size decreased continuously, while the total carbohydrate content increased. Meanwhile, ultrasonic power also had a significant impact on antioxidant activities of FFPs. From the research results, it could be seen that different ultrasonic power had certain changes in its spatial structure and properties, and the structural changes also affected the biological activity of FFP. The study of the effects of ultrasonic power on the physicochemical properties and biological activity of FFP lays the foundation for the development and application of FFP in food additives and natural drug carriers., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Pu liu reports financial support was provided by the National Natural Science Foundation of China. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

A glucosyl-rich pectin, JMMP-3 (M w , 2.572 × 10 4  g/mol, O-methyl % = 3.62%), was isolated and purified from the pericarp of the immature fruit of Juglans mandshurica Maxim. (QingLongYi). The structure of JMMP-3 was studied systematically by infrared spectroscopy, monosaccharide compositions, methylation analysis, partial acid hydrolysis, and 1/2D-NMR. The backbone of JMMP-3 possessed a smooth region (→  4 GalA 1  →) and a hairy region (→  4 GalA 1  →  2 Rha 1  →) with a molar ratio of 2: 5. The substitution of four characteristic side chains (R 1 -R 4 ) occurs at C-4 of → 2,4)-α-Rhap-(1→, where R 1 is composed of → 5)-α-Araf-(1→, R 2 is composed of → 4)-β-Galp-(1 → and β-Galp-(1→, R 3 is composed of α-Glcp-(1→, →4)-α-Glcp-(1 → and → 4,6)-α-Glcp-(1→, and R 4 is composed of → 5)-α-Araf-(1→, β-Galp-(1→, → 4)-β-Galp-(1→, → 3,4)-β-Galp-(1→, → 4,6)-β-Galp-(1 → and → 2,4)-β-Galp-(1 → . In addition, the antitumor activity of JMMP-3 on HepG2 cells was preliminarily investigated., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Heracleum dissectum is rich in nutrients, but there is little research on its soluble dietary fiber (SDF). In this study, SDF from H. dissectum was extracted by enzyme extraction (E-SDF), enzyme chemical extraction (EC-SDF), and fermentation extraction (F-SDF). The composition, molecular weight (Mw), structural characterization, and antioxidant activity of SDF extracted by the three methods were compared. This study showed that different extraction methods lead to differences in their structure. The Mw results showed that F-SDF had the largest Mw, the structure of SDF could be destroyed by enzymatic hydrolysis, and large molecules could be converted into small molecules. The monosaccharide composition analysis showed that the main sugars of E-SDF, EC-SDF, and F-SDF were galacturonic acid and galactose, and the main components of the three SDF samples were hemicellulose hydrolyzed pectin and soluble polysaccharide. Notably, E-SDF had the greatest antioxidant effect at the same concentration. In summary, different extraction methods can affect the structure and antioxidant capacity of H. dissectum SDF, among which E-SDF has potential as a functional food ingredient., (© 2024 Institute of Food Technologists.)

The extraction of cannabinoids from the inflorescence and leaves of Cannabis sativa L. is gaining interest from researchers, in addition to addressing the under-utilization of the by-products in the stems and roots of the trees. The present study investigated the recovery of pectin from the left-over parts of hemp tress using an eco-friendly method with the aid of organic acids. Different cannabis cultivars-Chalotte's Angels (CHA) and Hang-Krarog (HKR)-were used as plant materials. The stems of both cannabis cultivars contained more pectin than the roots, and tartaric acid-aided extraction provided higher yields than from citric acid. Extracting the acid solution affected some characteristics, thereby differentiating the functional properties of the derived pectin. Extraction using tartaric acid provided pectin with a higher galacturonic acid content, whereas pectin with a higher methylation degree could be prepared using citric acid. The pectin samples extracted from the stems of CHA (P-CHA) and HKR (P-HKR) had low methoxyl pectin. P-CHA had better free radical scavenging capability, whereas P-HKR showed more potent reducibility. Considering the functional properties, P-CHA showed greater emulsion formability and foaming activity, whereas P-HKR possessed a better thickening effect. The present work suggests the feasible utilization of P-CHA and P-HKR as food additives with bioactivity.

The biological potency of pectin is intricately intertwined with its intricate molecular architecture. The fine structure of pectin is influenced by the extraction method, while the specific impact of these methods on the fine structure and the affected attributes thereof remains enigmatic. This study delves into the profound analysis of eight distinct extraction methods influence on the structure and biological activity of citrus peel pectin. The findings demonstrate that citric acid ultrasound-assisted microwave extraction yields pectin (Pectin CA-US/MV ) with higher viscosity and a dense, rigid chain. Pectin extracted with acetic acid ultrasound (Pectin AA-US ) and citric acid ultrasound (Pectin CA-US ) exhibits elevated galacturonic acid (GalA) levels and reduced D-galactose (Gal) content, enhancing antioxidant activity. Eight pectin-chitosan (CS) hydrogels, especially Pectin CA-US/MV -CS, demonstrate commendable thermal stability, rheological properties, self-healing capability, and swelling behavior. This study characterizes citrus peel pectin properties from different extraction methods, laying a foundation for its application in food, pharmaceuticals, and industry., Competing Interests: Declaration of competing interest There is no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Pectin, a natural polysaccharide, holds versatile applications in food and pharmaceuticals. However, there is a need for further exploration into extracting novel functional fractions and characterizing them thoroughly. In this study, a sequential extraction approach was used to obtain three distinct lemon pectin (LP) fractions from lemon peels (Citrus Eureka): LP extracted with sodium acetate (LP-SA), LP extracted with ethylenediaminetetraacetic acid (LP-EDTA), and LP extracted with sodium carbonate and sodium borohydride (LP-SS). Comprehensive analysis revealed low methyl-esterification in all fractions. LP-SA and LP-SS displayed characteristics of rhamnogalacturonan-I type pectin, while LP-EDTA mainly consisted of homogalacturonan pectin. Notably, LP-SA formed self-aggregated particles with rough surfaces, LP-EDTA showed interlocking linear structures with smooth planes, and LP-SS exhibited branch chain structures with smooth surfaces. Bioactivity analysis indicated that LP-SA had significant apparent viscosity and ABTS radical scavenging activity, while both LP-EDTA and LP-SS showed excellent thermal stability according to thermogravimetric analysis (TGA). Furthermore, LP-SS exhibited remarkable gel-forming ability and significant hydroxyl free radicals scavenging activity. In conclusion, this study presents a novel method for extracting various lemon pectin fractions with unique structural and bioactive properties, contributing insights for advanced applications in the food and pharmaceutical sectors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Asparagus officinalis L. is a horticultural crop that contains a variety of bioactive compounds with anti-inflammatory effects. Aqueous extracts of A. officinalis can noticeably improve the learning and memory function of model mice. Herein, a pectin-arabinoglucuronogalactan complex (AOPB-1-1) with a relative molecular weight of 90.8 kDa was isolated from A. officinalis. The repeating structural unit of AOPB-1-1 was identified through monosaccharide composition, methylation analysis, uronic acid reduction, partial acid hydrolysis, and nuclear magnetic resonance spectroscopy. AOPB-1-1 contains the rhamnogalacturonan-I (RG-I) domain of pectin polysaccharides (PPs) and arabinoglucuronogalactan (AGG) regions. The backbone of the AGG region is composed of →3,6)-β-D-Galp-(1→ and →4)-β-D-Glcp-(1→ residues substituted at the 4-position to the →4)-α-D-GalAp-(1→ residues of the RG-I main chain. The anti-neuroinflammatory activity of AOPB-1-1 suggests that it can significantly reduce the content of inflammatory cytokines, including nitric oxide (NO), tumor necrosis factor-α (TNF-α), and interleukin-6 (IL-6) and inhibit the expression of inflammatory genes including cyclooxygenase-2 (COX2), nitric oxide synthase (iNOS), TNF-α, IL-6, and interleukin-1β (IL-1β) in LPS-stimulated BV2 cells. Furthermore, its inhibitory effects on TNF-α and IL-6 levels were even better than those of minocycline. The significant anti-neuroinflammatory activity of AOPB-1-1 suggests its applicability as a therapeutic option for the treatment of Alzheimer's disease., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In order to obtain high yield pomelo peel pectin with better physicochemical properties, four pectin extraction methods, including hot acid extraction (HAE), microwave-assisted extraction (MAE), ultrasound-assisted extraction, and enzymatic assisted extraction (EAE) were compared. MAE led to the highest pectin yield (20.43%), and the lowest pectin recovery was found for EAE (11.94%). The physicochemical properties of pomelo peel pectin obtained by different methods were also significantly different. Pectin samples obtained by MAE had the highest methoxyl content (8.35%), galacturonic acid content (71.36%), and showed a higher apparent viscosity, thermal and emulsion stability. The pectin extracted by EAE showed the highest total phenolic content (12.86%) and lowest particle size (843.69 nm), showing higher DPPH and ABTS scavenging activities than other extract methods. The pectin extracted by HAE had the highest particle size (966.12 nm) and degree of esterification (55.67%). However, Fourier-transform infrared spectroscopy showed that no significant difference occurred among the different methods in the chemical structure of the extracted pectin. This study provides a theoretical basis for the industrial production of pomelo peel pectin., (© 2024. The Author(s).)

Apple waste (APW) is the residual product after apple processing, including apple peel, apple core, apple seed, and other components. A large quantity of APW produced is abandoned annually, leading to serious resource waste and environmental pollution. APW is rich in natural active compounds, such as pectin, polyphenols, fatty acids, and dietary fiber, which has a good use value. This paper reviewed the current research on recovering active components from APW. The traditional extraction methods (acid, alkali, physical, enzyme, etc.) and the novel extraction methods (SWE, UAE, MAE, RFAE, etc.) for the recovery of pectin, polyphenols, apple seed oil, apple seed protein, and dietary fiber from APW were systematically summarized. The basic principles, advantages, and disadvantages of different extraction methods were introduced. The requirements of different extraction methods on extraction conditions and the effects of different extraction methods on the yield, quality, and functional activity of extracted products were analyzed. The challenges and future study direction of APW extraction have prospected. This paper aims to provide a reference for other researchers interested in APW extraction, improve the utilization rate of APW and extend the value chain of the apple industry.

The results of the study of the physicochemical properties of the high-molecular-weight soluble and insoluble components of nectarine cell walls obtained by fruit treatment under conditions that modulate of gastric digestion are presented. Homogenized nectarine fruits were sequentially treated by natural saliva and simulated gastric fluid (SGF) at pH 1.8 and 3.0. The isolated polysaccharides were compared with polysaccharides obtained by sequential extraction of nectarine fruit with cold, hot, and acidified water, solutions of ammonium oxalate and sodium carbonate. As a result, high-molecular-weight water-soluble pectic polysaccharides, weakly bound in the cell wall, were dissolved in the simulated gastric fluid, regardless of pH. Homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) were identified in all pectins. It was shown that their quantity and ability to form highly viscous solutions determine high values of the rheological characteristics of the nectarine mixture formed under simulated gastric conditions. The modifications occurring with the insoluble components under the influence of acidity of SGF were importance. They determined difference in the physicochemical properties of both the insoluble fibres and the nectarine mixtures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This work aimed to study the effect of ultrasound-assisted (UAE), microwave-assisted (MAE), and ultrasound-microwave-assisted (UMAE) methods for pectin extraction from industrial tomato waste. The overall performance index from the fuzzy analytical method with three criteria, pectin yield, galacturonic acid, and lycopene content, was applied to evaluate the best extraction conditions by using the weight of 75, 20, and 5, respectively. The UAE conditions was performed at a temperature of 80 °C for 20 min with the variations in the extraction pH and the solid liquid (SL) ratio. The best UAE conditions with high pectin yield, and high total carboxyl group, as well as a lycopene content, was the pH of 1.5 and the SL ratio of 1:30. The MAE conditions was performed with variations in the microwave powers and times. The results showed that the best MAE conditions were 300 W for 10 min, which gave high pectin yield with high galacturonic acid and lycopene content. Various conditions of UMAE at the best conditions of MAE and UAE were performed and exhibited that the UAE had more positively affected the pectin yield. However, the FTIR spectra of obtained pectins from different extraction techniques showed a similar pectin structure.

In order to better utilize the citrus pectin (CP) resource, the crude citrus pectin (CCP), obtained from the citrus fruit canning processing waste water, was purified by cellulose DEAE-52 column, providing neutral polysaccharide CP0 and two acidic polysaccharides (CP1 and CP3). CP1 had the highest yield among the three fractions, being 44.29%. The chemical composition, structure and morphology of these pectin components were analyzed. Monosaccharide composition analysis revealed that arabinose was the most abundant composition in these pectin samples. CCP, CP1 and CP3 were mainly composed of rhamnogalacturonan-I (RG-I) regions. Compared with CP3, CCP and CP1 had longer side chains, which are mainly consisted of arabinose. FT-IR and NMR analysis indicated that α-type glycosidic bonds are the main linkage in the four pectin components. These CP samples were found to possess different conformation, but no triple-helical conformation was observed in all these CP fractions. Scanning electron microscopy revealed that CCP, CP1 and CP3 all had irregular sheet-like structures and partly porous structures. The four pectin components showed the characteristics of non-Newtonian fluids and possessed good viscoelasticity. Due to these properties, the pectin might have potential application in food industry as food thickening agent., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Nicandra physaloides (Linn.) Gaertn seeds (NPGS) could be manually scrubbed to obtain water-soluble pectin, which forms gel at room temperature without additives. The extraction, characterization and spontaneous gelation (SG) mechanism of the pectin were studied. The results showed that the pectin was located on the surface of NPGS and easily to be dissolved. Chemically, the pectin was low methoxy pectin with esterification degree of 46.93%, Gal-A content of 65.80%, and average molar weight of 631.15 kDa. The SG occurred at the pectin concentration of 1.5%, it can be destroyed by urea and SDS, however, EDTA cannot. In addition, KCl and NaCl induced the gelation of 1.0% pectin solution and the ions of K, Mg, Ca and Na were detected in the pectin. Hydrogen bonding, electrostatic and hydrophobic interaction contributed to the SG. This study could promote the commercial applications of the pectin in the field of edible colloids and cosmetics., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This study investigated the biocomposite pectin films enriched with murta ( Ugni molinae T.) seed polyphenolic extract and reinforced by chitin nanofiber. The structural, morphological, mechanical, barrier, colorimetric, and antioxidant activity of films were evaluated. The obtained data clearly demonstrated that the addition of murta seed extract and the high load of chitin nanofibers (50%) provided more cohesive and dense morphology of films and improved the mechanical resistance and water vapor barrier in comparison to the control pectin film. The antioxidant activity ranged between 71% and 86%, depending on the film formulation and concentration of chitin nanofibers. The presented results highlight the potential use of chitin nanofibers and murta seed extract in the pectin matrix to be applied in functional food coatings and packaging, as a sustainable solution.

Acute respiratory infections are an important health concern. Traditionally, polysaccharide-enriched extracts from plants, containing immunomodulatory rhamnogalacturonan-I (RG-1), were used prophylactically. We established the effects of dietary supplementation with carrot-derived RG-I (cRG-I, 0-0.3-1.5 g/day) in 177 healthy individuals (18-65 years) on symptoms following infection with rhinovirus strain 16 (RV16). Primary outcomes were changes in severity and duration of symptoms, and viral load in nasal lavage. Secondary outcomes were changes in innate immune and anti-viral responses, reflected by CXCL10 and CXCL8 levels and cell differentials in nasal lavage. In a nested cohort, exploratory transcriptome analysis was conducted on nasal epithelium. Intake of cRG-I was safe, well-tolerated and accelerated local cellular and humoral innate immune responses induced by RV16 infection, with the strongest effects at 1.5 g/d. At 0.3 g/d, a faster interferon-induced response, induction of the key anti-viral gene EIF2AK2 , faster viral clearance, and reduced symptom severity (-20%) and duration (-25%) were observed. Anti-viral responses, viral clearance and symptom scores at 1.5 g/d were in between those of 0 and 0.3 g/d, suggesting a negative feedback loop preventing excessive interferon responses. Dietary intake of cRG-I accelerated innate immune and antiviral responses, and reduced symptoms of an acute respiratory viral infection.

Chinese quince (Chaenomeles sinensis) fruits offer a potential source of pectin and hemicellulose. However, the existence of lignin-carbohydrate complexes (LCCs) can negatively impact the extraction of pectin and hemicellulose. In this work, LCCs were sequentially fractionated from Chinese quince during the removal of pectin and hemicellulose. The structures of LCCs were characterized by HPAEC, FT-IR, GPC, Py-GC/MS, TGA and 2D HSQC NMR. The results showed that the carbohydrate content and molecular weight of LCCs was found to be changed significantly after the removal of hemicellulose (KSH). The lignin in Björkman LCCs was found to be linked mainly to galactan and fructan, whereas the lignin LCC-AcOHs was found to be linked mainly to arabinan after the removal of KSH. The isolation of carbonate-soluble pectin (NSP) increased thermal stability of Björkman LCC fraction, however, the isolation of chelator-soluble pectin (CSP) increased the thermal stability of LCC-AcOHs. The S/G ratios of LCC-AcOHs increased and large amounts of S-type lignin released during sequential fractionation of pectin and hemicellulose. These results will be beneficial for understanding the mechanisms of pectin and hemicellulose isolation, thereby facilitating the potential application of Chinese quince as a valuable natural resource for food and other industries., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The objective of the present investigation was to extract pectic polysaccharides from sesame seed hull and to determine their physicochemical and functional characteristics. The pectic polysaccharides in the seed hull were extracted with HCl and then collected at three ethanol concentrations of 30% (SSP30), 50% (SSP50), and 90% (SSP90). We found that SSP30 represented 75.6% of the total polysaccharides, and that it contained 76.39% galacturonic acid, with many HG domains and few short side chains in the RG-I domains. SSP30 exhibited the strongest hydroxyl radical scavenging activity among the three fractions, and was better able to stabilize the emulsions. Higher Mw pectic polysaccharides were firstly precipitated at lower ethanol concentrations, and the Mw of the precipitated pectic polysaccharides decreased with increasing ethanol concentration. These results provide important information on the structure and functional characteristics of sesame hull polysaccharides. This information can contribute to the future development of sesame hull polysaccharides for industrial purposes., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Background: The rind from cantaloupe is an agricultural waste of cantaloupe industrial processing. The current study tried to (i) evaluate the potential use of cantaloupe rind as a pectin source, (ii) optimize the factors of microwave-assisted extraction process using Box-Behnken design, and (iii) characterize the isolated pectin using various physicochemical, structural, functional and bioactivity properties., Results: Four variables of the extraction process were successfully optimized at a microwave power of 700 W, irradiation time of 112 s, pH value of 1.50 and liquid to solid (LS) value of 30 mL g -1 , with a yield of 181.4 g kg -1 . The analysis indicated a high-methylated galacturonic acid-rich (703.4 g kg -1 ) sample with an average molecular weight of 390.475 kDa. Also, the isolated pectin showed considerable functionality and antioxidant ability. The main functional groups, structural characteristics and crystallinity of samples were comparatively studied using Fourier transform infrared, nuclear magnetic resonance and X-ray diffraction spectroscopies., Conclusion: In comparison to commercial citrus pectin, isolated pectin showed a significantly higher value for most of the functional analysis such as oil holding capacity, emulsifying capacity, emulsion stability, DPPH • and ABTS •+ scavenging activity, and reducing power assay. In other analyses the isolated sample was close to the commercial one, indicating that cantaloupe rinds should be considered as a suitable additional resource for pectin production. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

The aim of this study was to isolate pectins with antioxidant activity from the leaves of Epilobium angustifolium L. Two pectins, EA-4.0 and EA-0.8, with galacturonic acid contents of 88 and 91% were isolated from the leaves of E. angustifolium L. by the treatment of plant raw materials with aqueous hydrochloric acid at pH 4.0 and 0.8, respectively. EA-4.0 and EA-0.8 were found to scavenge the DPPH radical in a concentration-dependent manner at 17-133 μg/mL, whereas commercial apple pectin scavenged at 0.5-2 mg/mL. The antioxidant activity of EA-4.0 was the highest and exceeded the activity of EA-0.8 and a commercial apple pectin by 2 and 39 times (IC 50 -0.050, 0.109 and 1.961 mg/mL), respectively. Pectins EA-4.0 and EA-0.8 were found to possess superoxide radical scavenging activity, with IC 50 s equal to 0.27 and 0.97 mg/mL, respectively. Correlation analysis of the composition and activity of 32 polysaccharide fractions obtained by enzyme hydrolysis and anionic exchange chromatography revealed that the antioxidant capacity of fireweed pectins is mainly due to phenolics and is partially associated with xylogalacturonan chains. The data obtained demonstrate that pectic polysaccharides appeared to be bioactive components of fireweed leaves with high antioxidant activity, which depend on pH at their extraction.

The potential isolation of bio-active polysaccharides from bay tree pruning waste was studied using sequential subcritical water extraction using different time-temperature combinations. The extracted polysaccharides were highly enriched in pectins while preserving their high molecular mass (10-100 kDa), presenting ideal properties for its application as additive in food packaging. Pectin-enriched chitosan films were prepared, improving the optical properties (≥95% UV-light barrier capacity), antioxidant capacity (˃95% radical scavenging activity) and water vapor permeability (≤14 g·Pa -1 ·s -1 ·m -1 ·10 -7 ) in comparison with neat chitosan-based films. Furthermore, the antimicrobial activity of chitosan was maintained in the hybrid films. Addition of 10% of pectins improved mechanical properties, increasing the Young's modulus 12%, and the stress resistance in 51%. The application of pectin-rich fractions from bay tree pruning waste as an additive in active food packaging applications, with triple action as antioxidant, barrier, and antimicrobial has been demonstrated., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Finger citron pomace is a cheap and renewable by-product of the citrus processing industry, representing up to 60% of the fruit biomass. In this study, a pectinase-based and ultrasonic-assisted method was firstly used to extract pectic oligosaccharides (POS) from finger citron pomace. Using the orthogonal experiment design (OED), the maximum conversion rate of up to 64.5% from pomace to POS was obtained under the extraction conditions of 0.25 mg mL -1 pectinase and 50 mg mL -1 pectin at 45 °C and pH 4.5 for 2 h. The extracted POS was then fractionated and purified to homogeneous oligosaccharides (FCPOS-1) with a molecular weight of 2.15 kDa, and the analyses of monosaccharide composition, FTIR, NMR and ESI-MS indicated that FCPOS-1 consisted of GalA and a small amount of mannose, galactose and arabinose. Multiple antioxidant activity assays in vitro revealed that FCPOS-1 possessed remarkable antioxidant properties, especially scavenging activity against DPPH radicals up to 94.07%. FCPOS-1 has the potential to be an effective natural antioxidant for applications in the food and pharmaceutical industries.

A low methyl-esterified pectin (33.2% methyl-esterification degree) was isolated from the tuber of Dioscorea opposita Thunb., which was an edible and medicinal material in China. This pectin (M w of 1.3 × 10 4 g/mol) contained the ~59.1% homogalacturonan (HG) and ~38.1% highly branched rhamnogalacturonan I (RG-I) region with possible side chains embracing arabinogalactan II, arabinan or arabinogalactan I. The fragments including HG backbone consisting of → 4)-α-GalpA-(1 → and → 4)-α-GalpA-6-O-methyl-(1 → with molar ratio of ~2:1, and repeating unit of arabinogalactan II side chain composed of α-Araf-(1 → and → 3,6)-β-Galp-(1→, were speculated through methylation analysis and NMR spectra. However, the linkage pattern for RG-I backbone and side chains were indiscernible due to limited resolution of NMR spectra. Besides, the pectin adopted a flexible chain conformation in 0.1 M NaNO 3 solution. These results provided a structural basis for study on polysaccharide from D. opposite, which was benefit for development of functional food of yam., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A pectic polysaccharide (named CMDP-4b) with a molecular weight of 31.97 kDa was extracted from Cucurbita moschata Duch and purified by column chromatography. On the basis of methylation, Fourier-transform infrared, monosaccharide composition, and one- and two-dimensional nuclear magnetic resonance spectroscopy analyses, the structure of CMDP-4b was determined to be composed of an α-1,4-linked homogalacturonan backbone, which was slightly acetylated and highly methyl-esterified, and branched at the O-3 position of the →4)-α-D-GalpA-6-OMe-(1→. Immunomodulatory assays showed that CMDP-4b not only induced the secretion of nitrous oxide and cytokines (i.e. IL-1β, TNF-α, and IL-6) but also promoted pinocytic and phagocytic activities of macrophages, suggesting that CMDP-4b possessed immunomodulatory activity. Moreover, toll-like receptor 4 and complement receptor 3 may play a critical role in CMDP-4b-induced macrophage activation through the NF-κB and the MAPKs signaling pathways. Our study provides the molecular basis for the potential use of CMDP-4b as a natural immunostimulant., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Three non-conventional extraction techniques (enzyme-assisted with cellulase, citric acid ultrasound-assisted and enzyme-ultrasound-assisted treatment) and conventional citric acid extraction were applied to obtain pectin from raspberry, blueberry, strawberry and redcurrant, and were compared in terms of extraction yields and physicochemical properties of the extracted pectins. Except for pectin from raspberry, conventional citric acid extraction led to the highest extraction yield (~8%) and, for the same berries, the lowest pectin recovery was found for the extraction with cellulase (~4%). Regarding the structural characteristics of pectins, enzymatically extracted pectins from redcurrant and strawberry exhibited the highest levels of galacturonic acid (≥73%) whereas, in general, this monosaccharide was found from 51 to 69% in the rest of samples. Although, ultrasound-assisted extraction did not improve pectin yield, it minimized the levels of "non-pectic" components leading to the obtainment of purer pectin. The different monomeric composition and the wide range of molecular weight of the obtained pectins pointed out their usefulness in different potential food applications (e.g., thickening, gelling ingredients) and biological activities. This has been evidenced by the differences found in their physicochemical and techno-functional characteristics. Finally, it can be considered that the berries here studied are efficient sources of pectin., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Cranberries of Stevens variety, mainly used for juice production, were processed into pomace, from which alcohol insoluble solids (AIS) were obtained. The cell wall polysaccharides were sequentially extracted from AIS, and characterized in terms of monosaccharide profile, sugar linkage and molecular weight distribution. Pectic polysaccharides represented more than 90% of the carbohydrates contained in hot buffer (HA), chelating agents (CH) and diluted alkali (DA) extracts. HA extract contained homogalacturonan with 75% being methyl esterified, and pectic arabinan with traces of pectic galactan, type II arabinogalactan and 1,4-β-glucan. CH extract, recovered with the highest yield (11.0% w/w), was composed mainly of homogalacturonan. DA extract included homogalacturonan with 2% methyl esterification, abundant arabinan and galactans and traces of 1,4-β-glucan. Glucomannan, xylan and xyloglucan represented 66% of the carbohydrates present in the last concentrated alkali extract (CA), the rest being pectic arabinan and galactan. High molecular weight polysaccharides (>10 2  kDa) were identified in all extracts., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The elucidation of the structural characteristics of polysaccharides from natural sources is generally difficult owing to their structural complexity and heterogeneity. In our previous study, an immuno-stimulatory polysaccharide (RGP-AP-I) was isolated from Korean red ginseng (Panax ginseng C.A. Meyer). The present study aims to elucidate the structural characteristics of RGP-AP-I. Sequential enzyme hydrolysis was performed using four specific glycosylases, and chemical cleavage via β-elimination was carried out to determine the fine structure of RGP-AP-I. The degraded fragments were chemically identified using various chromatographic and spectrometric analyses, including HPLC-UVD, GC-MS, and tandem mass spectrometry. The results indicated that RGP-AP-I comprises a rhamnogalacturonan I (RG-I) backbone with repeating disaccharide units [→2)-Rhap-(1 → 4)-GalAp-(1→] and three side chains substituted at the C(O)4 position of the rhamnose residue in the backbone. The three side chains were identified as a highly branched α-(1 → 5)-arabinan, a branched β-(1 → 4)-galactan, and an arabino-β-3,6-galactan. Our results represent the first findings regarding the fine structure of the immuno-stimulatory polysaccharide RG-AP-I isolated from red ginseng., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Background: Ultrasonic pretreatment is a novel physical method that can be used in the extraction process of okra pectin. Real-time online monitoring technologies were introduced in time and frequency domains when okra was pretreated. Preparation time of dried okra and yield of okra pectin were studied; and physicochemical properties of okra pectin were analyzed at the optimum ultrasonic parameter., Results: Results showed that ultrasonic intensity of sweeping-frequency ultrasonic (SFU) pretreatment was stronger than that of fixed-frequency ultrasonic pretreatment (FFU). SFU pretreatment (60 ± 1 kHz) at 30 min had a strong ultrasonic voltage peak of 0.05387 V and signal power peak of -6.62 dBm. The preparation time of dried okra was 160 ± 14.14 min in the pretreated group, 44.83% lower than control without SFU pretreatment. The intercellular space was 56.03% higher than control. Water diffusion coefficient increased from 1.41 × 10 -9 to 2.14 × 10 -9  m 2  s -1 . Monobasic quadratic equations were developed for the monitored ultrasonic intensity and pectin yield. Compared to control, extraction yield (16.70%), pectin content (0.564 mg mg -1 ), solubility (0.8187 g g -1 ) and gel strength (30.91 g) were improved in the pretreated group. Viscosity decreased, and values of G' and G″ crossing at 63 rad s -1 revealed the viscoelastic behavior and the beginning of viscous behavior with a sol state., Conclusion: Decrement of dried preparation time and increment of yield were achieved by ultrasonic pretreatment during the extraction process of okra pectin, and the relationship of ultrasonic intensity monitored by real-time online technologies and yield was given. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

Commercial pectin production is based on vacuum evaporation and alcohol precipitation (VEAP) using large quantities of expensive and flammable alcohol. This process has high production costs that have greatly limited the commercial use of refined pectins. This study demonstrates a new technology using a diaultrafiltration (DUF) process in a pilot plant, which is a low-cost, green, and ecologically friendly way to produce pectin. In terms of the structure and quality of their products, a comparison of the two methods suggest that DUF provides significant (p < 0.05) flux enhancement, high pectin purity, and separation of the main pectin backbones, with higher molar mass (Mw) and less polydispersity (Mw/Mn) of pectin samples. An analysis of the 1D and 2D NMR spectra reveals that the DUF process removes most free impurities extracted along with the pectin macromolecules, making this method preferable to use. An analysis of power and chemical consumption demonstrates that the new process is preferable over existing methods due to lower energy consumption and higher product quality. It also possesses a flexible technical design that allows it to produce semi-products from various raw materials., (Copyright © 2021 Elsevier B.V. All rights reserved.)

High pressure processing (HPP) has become a promising strategy for extracting bioactive constituents. In this study, the impact of HPP treatment at various pH values (2.0, 8.0, and 12.0) on the macromolecular, structural, antioxidant capacity, rheological characteristics and gel properties of citrus pectic polysaccharide was investigated. The results showed that pressure and pH significantly affected the yield and Rhamnogalacturonan I (RG-I) characterizations. The yields of high pressure extraction at pH 12 (28.13 %-33.95 %) were significantly higher than the yields at pH 2 (14.85 %-16.11 %) and pH 8 (8.75 %-9.65 %). The yield of HPP (500 MPa/10 min) assisted alkali extraction is more than 2 times of that of HPP assisted acid extraction. The RG-I structure ratio of HPP-alkali extraction pectic polysaccharide (74.51 %) was significantly higher than that of traditional pectin (41.83 %). The results showed that HPP assisted alkali is a potential pectic polysaccharide extraction technology., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Three water-soluble pectic polysaccharides (WKBP-P2, P3 and P4) were isolated from white kidney bean by ion exchange combined with size-exclusion methods. The structural features were characterized by GC-MS, NMR spectroscopy and HPSEC-MALLS-RI. It was found that three pectic polysaccharides were the major water-extracted polysaccharides in white kidney bean. All the WKBP-P2, P3 and P4 were probably composed of various structural regions including homogalacturonan (HG), xylogalacturonan (XGA), rhamnogalacturonan I (RG-I) regions in backbone, and arabinan region mainly as side chain. However, these pectic polysaccharides were significantly different in molar ratios of these structural regions and molecular size. WKBP-P2 was HG-predominant pectin (partially methyl-esterified) with weight-average molecular weight (M w ) of 1.2 × 10 4  g/mol, and contained minor RG-I, arabinan and probable XGA regions. WKBP-P3 (M w of 4.0 × 10 4  g/mol) primarily embraced XGA, HG, arabinan regions and minor RG-I region. WKBP-4 with highest M w (4.5 × 10 5  g/mol) had the most arabinan region (51.3%), which was probably the side chain linked to the backbone composed of RG-I, HG and slight XGA regions. These findings provided a structural basis for study on polysaccharides from white kidney bean, which was benefit for development of functional food., (Copyright © 2021 Elsevier B.V. All rights reserved.)