Search

With increasing interest in the rapid development of customized ceramic electronics, hybrid additive manufacturing (HAM) technology has become a competent alternative to traditional solutions such as printed circuit boards and cofired ceramic technology. Herein, the novel HAM technology is proposed by combining a dispensing three-dimensional (3D) printing process and selectively laser-activated electroless plating for fabricating 3D fully functional ceramic electronic products. An appropriative 3D-printable and metalizable low-temperature cofired ceramic slurry is developed to build the green body of ceramic electronics. After the debinding and sintering process, the 3D ceramic structure can be selectively laser-activated and then electrolessly plated to achieve electronic functionality. The thickness of the plated copper layer approaches 10 μm after 4 h of plating, and the electrical conductivity is 5.5 × 10

Renal fibrosis is a major pathological event in the development of diabetic nephropathy (DN). Baicalin is a flavonoid glycoside that possesses multiple pharmacological properties including anti-fibrotic activity. In the present study, the effects of baicalin on renal fibrosis along with related molecular basis were investigated in streptozotocin (STZ)-induced DN mouse model and high glucose (HG)-treated HK-2 human proximal tubule epithelial cell model. Renal injury was evaluated through blood urea nitrogen (BUN) and serum creatinine (Scr) levels and urine albumin creatine ratio (ACR). Renal fibrosis was assessed by type IV collagen (COLIV) and fibronectin (FN) protein expression and histopathologic analysis via Masson trichrome staining. Protein levels of COLIV, FN, NF-κB inhibitor alpha (IκBα), phosphorylated IκBα (p-IκBα), p65, phosphorylated p65 (p-p65), and toll-like receptor 4 (TLR4) were measured by western blot assay. MicroRNA-124 (miR-124) and TLR4 mRNA levels were detected by RT-qPCR assay. The interaction of miR-124 and TLR4 was examined by bioinformatics analysis, luciferase reporter assay, and RIP assay. Baicalin or miR-124 attenuated renal injury and fibrosis in STZ-induced DN mice. Baicalin inhibited the increase of COLIV and FN expression induced by HG through upregulating miR-124 in HK-2 cells. TLR4 was a target of miR-124. MiR-124 inhibited TLR4/NF-κB pathway activation and the inactivation of the NF-κB pathway hindered COLIV and FN expression in HG-stimulated HK-2 cells. Baicalin prevented renal fibrosis by increasing miR-124 and inactivating downstream TLR4/NF-κB pathway in DN, hinting the pivotal values of baicalin and miR-124 in the management of DN and renal fibrosis.

With the development of power system, the level of short circuit current is also increasing rapidly. As an effective method to limit short circuit current, fault current limiter (FCL) is more and more widely used. There are many kinds of fault current limiters according to their working principles. Compared with other types of fault current limiters, the fault current limiter based on high coupled split reactor (HCSR) has many advantages. Under normal operation condition, this type of fault current limiter shows very small leakage inductance. When short circuit fault occurs, it will change into current limiting reactor. The capacity of fault current limiter to withstand short-time withstand current and peak withstand current is an important evaluation index, and the reasonable equivalent test method is very important. In this paper, combined with the research of 500 kV and above voltage level AC fault current limiter, the test methods of short-time withstand current and peak withstand current of fault current limiter based on HCSR are comprehensively analyzed, so as to meet the requirements of short-time withstand current and peak withstand current test of fault current limiter based on HCSR.

Direct manufacturing of customized end-use electronic products is becoming an emerging trend of additive manufacturing (AM). This highly demands the evolution of the conventional AM processes from simply building single-material parts to simultaneously delivering complex structures and end-use functionalities. In this work, we propose a novel hybrid additive manufacturing solution that combines stereolithography (SLA) three-dimensional (3D) printing and laser-activated electroless plating for the manufacture of 3D fully functional electronic products. With our newly developed functional SLA resin that can be 3D printed, laser-activated, and thereafter selectively metalized, high-resolution circuitry can be free-formly patterned on 3D structures. In virtue of high-performance electrical materials, this technology is capable of creating not only 3D direct-current (DC) electronics but also 3D high-frequency devices like microwave/millimeter-wave antennas, which cannot be fabricated via traditional printed circuit board (PCB) technology and not even by most AM processes. This study represents a significant advance in additive manufacturing technologies, and more importantly offers a unique opportunity for the mass customization of fully functional 3D electronic products, which shows great potentials in consumer electronics, communication engineering, and automobile and aerospace industries.

In this work, a novel sausage incorporated with the Pleurotus ostreatus (PO) puree was successfully developed to reduce the residual nitrite and lipid oxidation during refrigerated storage (4 ± 1 °C) for 20 days. Five recipes with the supplement proportion of 0 wt.%, 10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.% PO were produced and their physicochemical properties, nitrite residue, and sensory characteristics were measured. The results show that the content of moisture and all the essential amino acids (especially lysine and leucine) and the non-essential amino acids (especially aspartic and glutamic), lightness, springiness, and water holding capacity of the sausages were increased. However, the content of protein, fat, ash, pH, redness, hardness, gumminess, and chewiness of the sausages was decreased. For the sensory evaluation, the sausage with 20 wt.% PO had better sensory performance including flavor, aroma, and acceptability compared with other experimental groups and the control group. Moreover, the sausages with PO reduced the residual nitrite and inhibited lipid oxidation during storage. All of these results indicate that adding PO puree into pork sausage is a realizable and effective way to obtain nutritional and healthy pork sausages.

Trehalose is known for its effect of improving the stability of freeze-dried foods. In this work, vacuum freeze-drying (VFD) technology was employed to prepare northeast black bee royal jelly into lyophilized powder and a novel method mixing trehalose into royal jelly is successfully developed to enhance the free radical scavenging ability and the nutrition stability of royal jelly lyophilized powder. The effects of different trehalose content (0, 0.1, 0.3, 0.5, 0.7 and 0.9 wt.%) on the physicochemical properties of lyophilized royal jelly powder were studied. With systematic analysis, it was found that the incorporation of suitable trehalose content in lyophilized royal jelly powder can reduce the loss of the protein, total sugar, total flavone content during the VFD process and enhance the total phenolic antioxidant capacity, solubility, angle of repose, and bulk density of the royal jelly powder. Finally, lyophilized royal jelly with 0.5 wt.% trehalose is selected as the suitable addition content which exhibits the best radical scavenging ability as well as the lowest hygroscopicity. From the perspective of sensory evaluation, all royal jelly lyophilized powders with trehalose are acceptable.

Compared with traditional integral imaging systems, light-field displays (LFDs) based on a holographic functional screen (HFS) shows significant advantages in terms of the number of viewpoints, large viewing angle, and high viewing resolution. LFDs usually suffer from a limited depth range, and the reason majorly originates from the pixel deviation effect in the reconstruction process. Here, an analysis method for the depth of field (DOF) based on the pixel deviation effect observed on the HFS plane is presented. Simulation experiments are carried out to show that the percentage of pixel deviation is a more accurate measure to calculate the DOF. The feasibility of this method is verified in optical experiments.

A full-parallax tabletop three dimensional (3D) light-field display with high viewpoint density and large viewing angle is demonstrated based on the space-multiplexed voxel screen, which consists of nine projectors and a holographic functional screen. Each voxel point on the space-multiplexed voxel screen emits nine light beams with different directions to reconstruct nine different viewing areas, and the viewpoint density in the large viewing angle is significantly improved. As the viewpoint density increases, the aliasing phenomenon is reduced. Simulation and comparison experiments of the 3D light-field display system with the liquid crystal display (LCD) panel and space-multiplexed voxel screen are carried out, and results show the effectiveness of the proposed method. A high quality of 3D light-field image is achieved with 44100 viewpoint perspectives in 96° viewing angle along vertical and horizontal directions.

When employing the light field method with standard lens array and the holographic functional screen (HFS) to realize the tabletop three-dimensional (3D) display, the viewing area of the reconstructed 3D images is right above the screen. As the observers sit around the table, the generated viewpoints in the middle of the viewing area are wasteful. Here, a 360-degree viewable light-field display system is demonstrated, which can present 3D images to multiple viewers in ring-shaped viewing range. The proposed display system consists of the HFS, the aspheric conical lens array, a 27-inch LCD with the resolution of 3840×2160, the LEDs array and the Fresnel lens array. By designing the aspheric conical lens, the light rays emitting from the elemental images forms the viewpoints in a ring-type arrangement. And the corresponding coding method is given. Compared with the light field display with standard lens array, the viewpoint density is increased and the aliasing phenomenon is reduced. In the experiment, the tabletop light-field display based on aspheric conical lens array can present high quality 360-degree viewable 3D image with the right perception and occlusion.

Real-time terrain rendering with high-resolution has been a hot spot in computer graphics for many years, which is widely used in electronic maps. However, the traditional two-dimensional display cannot provide the occlusion relationship between buildings, which restricts the observers’ judgment of spatial accuracy. With three projectors, compound lenticular lens array and holographic functional screen, a dynamic three-dimensional (3D) light-field display with 90° viewing angle is demonstrated. Three projectors provide views for the right 30 degrees, center 30 degrees and left 30 degrees, respectively. The holographic functional screen recomposes the light distribution, and the compound lenticular lens array is optimized to balance the aberrations and improve the display quality. In our experiment, the 3D light-field image with 96 perspectives provides the right geometric occlusion and smooth parallax in the viewing range. By rendering 3D images and synchronizing projectors, the dynamic light field display is obtained.

The dynamic stress simulation and experiment of the 21kV equivalent prototype of the 500kV current limiter high coupled split reactor are researched in this paper. A calculation model of dynamic stress of 21kV equivalent prototype of 500kV current limiter high coupled split reactor is established by using finite element simulation software, and the dynamic stress distribution is analysed with the calculation results. Then the dynamic stability experiments of the single arm of the prototype and analysis of the experiment and simulation results are introduced. The results of simulation and experiment prove that both of the dynamic stability of the 21kV equivalent prototype and the 500kV current limiter high coupled split reactor meet the design requirement.

A novel optical reverse mapping (ORM) method and an ORM criterion are proposed to evaluate the relevance between the directional backlight (DB) 3D light-field display system aberration and the crosstalk. Based on the ORM criterion, the space-division-multiplexed catadioptric integrated backlight (SCIB) and symmetrical triplet-compound lenticular array (triplet LA) are designed. The SCIB is composed of hybrid Fresnel integrated backlight unit (hybrid Fresnel unit) and space-division-multiplexed microprism unit (microprism unit). The hybrid Fresnel unit is used to provide the directional light, and the divergence angle is 2.4-degrees. The average uniformity of 83.02% is achieved. The microprism unit is used to modulate the directional light distribution into three predetermined directions to establish a 90-degree viewing area. Combined with SCIB, the triplet LA is used to suppress the aberrations and reduce the crosstalk. In the experiment, a DB 3D light-field display system based on SCIB and triplet LA is set up. The displayed light-field 3D image can be observed in a 90-degree viewing angle. Compared to the conventional DB 3D display system, the light-field 3D image is aberration-suppressed, and the SSIM values are improved from 0.8462 to 0.9618. Meanwhile, the crosstalk measurement results show that the average crosstalk is 3.49%. The minimum crosstalk is 2.31% and the maximum crosstalk is 4.52%. The crosstalk values in 90-degree are lower than 5%.

A large viewing angle floating three-dimensional (3D) light field display based on spatial data reconstruction (SDR) algorithm is presented. It consists of the 3D light field display unit (LFDU) and the floating display unit (FDU). With the time-sequential directional backlight system, LFDU can provide 3D scenes with a large viewing angle in the horizontal direction. Based on FDU, the floating display has a large off-screen display depth, and the SDR algorithm is introduced to improve the 3D image quality. Combining the SDR algorithm with the time-sequential directional backlight system, a large viewing angle and image quality enhanced floating 3D light field display is realized. For the demonstrated floating 3D light field system, the floating 3D images can be reconstructed by the optical system within the viewing angle of 60 degrees. The feasibility of the proposed display method is verified with experimental results.

A novel catadioptric retroreflector floating device (CRA) used in the 3D floating light-field system is proposed. The floating light-field image constructed by the CRA is aberration-suppressed. The luminance and the contrast of the image are substantially improved in a 90-degree viewing angle. The CRA is constituted of the designed catadioptric retroreflector (CR). The CR consists of three lenses, the first and the second lens is to refract the light, and the rear surface of the third lens is coated with reflective coating in order to reflect the incident light. The CRA is processable and the fabrication process using UV embossing is also described. A spectrophotometer is utilized to measure the retroreflective efficiency of the CRA. The average retroreflective efficiency of the CRA is 80.1%. A beam quality analyzer is utilized to measure the beam spot quality of the CRA, and the image quality can satisfy the requirements of human eye observation. In the experiment, compared to the floating light-field image constructed by the micro-beads type retroreflector floating device (MRA), the image quality of the floating light-field image constructed by the CRA is significantly enhanced. In the quantitative computer simulation, the PSNR values of the images are increased from 23.0185 to 32.1958.

For traditional integral imaging display systems with usual lens array, there is the same viewing angle in the horizontal and vertical direction. Due to usual display has vertically long sub-pixels, this sub-pixel shape makes the view density be lower in vertical direction than the horizontal one. Here, a clear full-parallax 3D light field display with uniform view density along the horizontal and vertical direction is demonstrated. The proposed 3D display system consists of a collimated backlight source, a 31.5-inch LCD with the resolution of 3840 × 2160, an aspherical cylindrical compression lens (ACCL) array and a holographic functional screen (HFS). The ACCL array is used to compress the vertical viewing angle to increase the view density in the vertical direction. After combining the collimated backlight, the aberration of the system is suppressed. Compared with traditional integral imaging display, the viewpoint density in the vertical direction is increased and the aliasing phenomenon is reduced. Experimental results show that a clear full-parallax light field 3D image can be achieved in the horizontal viewing angle of 81 degrees and the vertical viewing angle of 27 degrees.

As O-ring is widely used in GIS, research of its aging and operating life is helpful to the maintenance of GIS. In order to study the aging of O-ring and its compression set after aging, a method of aging experiment was designed. The experiment was carried out according to the method, and the results at different temperatures were collected. A data processing method is also introduced, and the results of the experiment were processed using according to the method to predict the operating life of O-ring at different temperatures. According to the results of the experimental study, the compression set of O-ring used in GIS is positively correlated with the aging time and temperature, and the aging process follows the Arrhenius rule; the operating life of O-ring is 2.5 years at working temperature of 70°C. The methods and conclusions of this paper can be used to evaluate the operating life of O-ring used in GIS.

The light field display can provide vivid and natural 3D performance, which can find many applications, such as relics research and exhibition. However, current light field displays are constrained by the viewing angle, which cannot meet the expectations. With three groups directional backlights and a fast-switching LCD panel, a time-multiplexed light field display with a 120-degree wide viewing angle is demonstrated. Up to 192 views are constructed within the viewing range to ensure the right geometric occlusion and smooth parallax motion. Clear 3D images can be perceived at the entire range of viewing angle. Additionally, the designed holographic functional screen is used to recompose the light distribution and the compound aspheric lens array is optimized to balance the aberrations and improve the 3D display quality. Experimental results verify that the proposed light field display has the capability to present realistic 3D images of historical relics in 120-degree wide viewing angle.

A novel auto-stereoscopic three-dimensional (3D) projection display system based on the frontal projection lenticular screen is demonstrated. It can provide high real 3D experiences and the freedom of interaction. In the demonstrated system, the content can be changed and the dense of viewing points can be freely adjusted according to the viewers’ demand. The high dense viewing points can provide smooth motion parallax and larger image depth without blurry. The basic principle of stereoscopic display is described firstly. Then, design architectures including hardware and software are demonstrated. The system consists of a frontal projection lenticular screen, an optimally designed projector-array and a set of multi-channel image processors. The parameters of the frontal projection lenticular screen are based on the demand of viewing such as the viewing distance and the width of view zones. Each projector is arranged on an adjustable platform. The set of multi-channel image processors are made up of six PCs. One of them is used as the main controller, the other five client PCs can process 30 channel signals and transmit them to the projector-array. Then a natural 3D scene will be perceived based on the frontal projection lenticular screen with more than 1.5 m image depth in real time. The control section is presented in detail, including parallax adjustment, system synchronization, distortion correction, etc. Experimental results demonstrate the effectiveness of this novel controllable 3D display system.