Search

Neuromorphic photonic processors based on resonator weight banks are an emerging candidate technology for enabling modern artificial intelligence (AI) in high speed analog systems. These purpose-built analog devices implement vector multiplications with the physics of resonator devices, offering efficiency, latency, and throughput advantages over equivalent electronic circuits. Along with these advantages, however, often come the difficult challenges of compensation for fabrication variations and environmental disturbances. In this paper, we review sources of variation and disturbances from our experiments, as well as mathematically define quantities that model them. Then, we introduce how the physics of resonators can be exploited to weight and sum multiwavelength signals. Finally, we outline automated design and control methodologies necessary to create practical, manufacturable, and high accuracy/precision resonator weight banks that can withstand operating conditions in the field. This represents a road map for unlocking the potential of resonator weight banks in practical deployment scenarios.

Light-sheet fluorescent microscopy has become the leading technique for in vivo imaging in the fields of disease, medicine, and cell biology research. However, designing proper illumination for high image resolution and optical sectioning is challenging. Another issue is geometric constraints arising from the multiple bulky components for illumination and detection. Here, we demonstrate that those issues can be well addressed by integrating nanophotonic meta-lens as the illumination component for LSFM. The meta-lens is composed of 800-nm-thick GaN nanostructures and is designed for a light-sheet well-adapted to biological specimens such as the nematode Caenorhabditis elegans (C. elegans). With the meta-lens, the complexity of the LSFM system is significantly reduced, and it is capable of performing multicolor fluorescent imaging of live C. elegans with cellular resolution. Considering the miniature size and plane geometry of the meta-lens, our system enables a new design for LSFM to acquire in vivo images of biological specimens with high resolution.

Microelectronic computers have encountered challenges in meeting all of today’s demands for information processing. Meeting these demands will require the development of unconventional computers employing alternative processing models and new device physics. Neural network models have come to dominate modern machine learning algorithms, and specialized electronic hardware has been developed to implement them more efficiently. A silicon photonic integration industry promises to bring manufacturing ecosystems normally reserved for microelectronics to photonics. Photonic devices have already found simple analog signal processing niches where electronics cannot provide sufficient bandwidth and reconfigurability. In order to solve more complex information processing problems, they will have to adopt a processing model that generalizes and scales. Neuromorphic photonics aims to map physical models of optoelectronic systems to abstract models of neural networks. It represents a new opportunity for machine information processing on sub-nanosecond timescales, with application to mathematical programming, intelligent radio frequency signal processing, and real-time control. The strategy of neuromorphic engineering is to externalize the risk of developing computational theory alongside hardware. The strategy of remaining compatible with silicon photonics externalizes the risk of platform development. In this perspective article, we provide a rationale for a neuromorphic photonics processor, envisioning its architecture and a compiler. We also discuss how it can be interfaced with a general purpose computer, i.e. a CPU, as a coprocessor to target specific applications. This paper is intended for a wide audience and provides a roadmap for expanding research in the direction of transforming neuromorphic photonics into a viable and useful candidate for accelerating neuromorphic computing.

Abstract Background Intracerebral hemorrhage (ICH) remains a serious clinical problem lacking effective treatment. Urocortin (UCN), a novel anti-inflammatory neuropeptide, protects injured cardiomyocytes and dopaminergic neurons. Our preliminary studies indicate UCN alleviates ICH-induced brain injury when administered intracerebroventricularly (ICV). The present study examines the therapeutic effect of UCN on ICH-induced neurological deficits and neuroinflammation when administered by the more convenient intraperitoneal (i.p.) route. Methods ICH was induced in male Sprague-Dawley rats by intrastriatal infusion of bacterial collagenase VII-S or autologous blood. UCN (2.5 or 25 μg/kg) was administered i.p. at 60 minutes post-ICH. Penetration of i.p. administered fluorescently labeled UCN into the striatum was examined by fluorescence microscopy. Neurological deficits were evaluated by modified neurological severity score (mNSS). Brain edema was assessed using the dry/wet method. Blood-brain barrier (BBB) disruption was assessed using the Evans blue assay. Hemorrhagic volume and lesion volume were assessed by Drabkin's method and morphometric assay, respectively. Pro-inflammatory cytokine (TNF-α, IL-1β, and IL-6) expression was evaluated by enzyme-linked immunosorbent assay (ELISA). Microglial activation and neuronal loss were evaluated by immunohistochemistry. Results Administration of UCN reduced neurological deficits from 1 to 7 days post-ICH. Surprisingly, although a higher dose (25 μg/kg, i.p.) also reduced the functional deficits associated with ICH, it is significantly less effective than the lower dose (2.5 μg/kg, i.p.). Beneficial results with the low dose of UCN included a reduction in neurological deficits from 1 to 7 days post-ICH, as well as a reduction in brain edema, BBB disruption, lesion volume, microglial activation and neuronal loss 3 days post-ICH, and suppression of TNF-α, IL-1β, and IL-6 production 1, 3 and 7 days post-ICH. Conclusion Systemic post-ICH treatment with UCN reduces striatal injury and neurological deficits, likely via suppression of microglial activation and inflammatory cytokine production. The low dose of UCN necessary and the clinically amenable peripheral route make UCN a potential candidate for development into a clinical treatment regimen.

This study aims to reveal the differences in the species and relative content of metabolites in the leaf and root tuber of Fallopia multiflora and improve the comprehensive utilization rate of F. multiflora resources. The metabolites in the root tubers and leaves of F. multiflora were detected by widely targeted metabolomics based on ultra performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS). The principal component analysis, hierarchical cluster analysis, and orthogonal partial least squares-discriminant analysis were carried out to screen the differential metabolites between the leaf and root tuber of F. multiflora. The result showed that a total of 1 942 metabolites in 15 categories were detected in the leaf and root tuber of F. multiflora, including 1 861 metabolites in the root tuber, 1 901 metabolites in the leaf, and 1 820 metabolites in both. The metabolites were mainly phenolic acids, flavonoids, amino acids and derivatives, and alkaloids. A total of 1 200 differential metabolites were screened out, accounting for 65.9% of the total metabolites. Among these differential metabolites, 813 and 387 showed higher content in the leaf and root tuber, respectively. Flavonoids were the metabolites with the largest number and the most significant differences between the leaf and root tuber, and stilbenes and anthraquinones as the main active compounds mainly existed in the root tuber. The KEGG enrichment results suggested that the differential metabolites were mainly enriched in flavonoid and flavonol biosynthesis pathways and linoleic acid metabolism pathway. This study discovered abundant metabolites in F. multiflora. The metabolites were similar but had great differences in the content between the leaf and root tuber. The research results provide theoretical guidance for the development and utilization of F. multiflora resources.

Fiber-reinforced composites (FRPs) are characterized by their lightweight nature and superior mechanical characteristics, rendering them extensively utilized across various sectors such as aerospace and automotive industries. Nevertheless, the precise mechanisms governing the interaction between the fibers present in FRPs and the polymer melt during industrial processing, particularly the manipulation of the flow-fiber coupling effect, remain incompletely elucidated. Hence, this study introduces a geometrically symmetrical 1 × 4 multi-cavity mold system, where each cavity conforms to the ASTM D638 Type V standard specimen. The research utilizes theoretical simulation analysis and experimental validation to investigate the influence of runner and overflow design on the flow-fiber coupling effect. The findings indicate that the polymer melt, directed by a geometrically symmetrical runner, results in consistent fiber orientation within each mold cavity. Furthermore, in the context of simulation analysis, the inclusion of the flow-fiber coupling effect within the system results in elevated sprue pressure levels and an expanded core layer region in comparison to systems lacking this coupling effect. This observation aligns well with the existing literature on the subject. Moreover, analysis of fiber orientation in different flow field areas reveals that the addition of an overflow area alters the flow field, leading to a significant delay in the flow-fiber coupling effect. To demonstrate the impact of overflow area design on the flow-fiber effect, the integration of fiber orientation distribution analysis highlights a transformation in fiber arrangement from the flow direction to cross-flow and thickness directions near the end-of-fill region in the injected part. Additionally, examination of the geometric dimensions of the injected part reveals asymmetrical geometric shrinkage between upstream and downstream areas in the end-of-fill region, consistent with microscopic fiber orientation changes influenced by the delayed flow-fiber coupling effect guided by the overflow area. In brief, the introduction of the overflow area extends the duration in which the polymer melt exerts control in the flow direction, consequently prolonging the period in which the fiber orientation governs in the flow direction (A 11 ). This leads to the impact of fiber orientation on the flow of the polymer melt, with the flow reciprocally affecting the fibers. Subsequently, the interaction between these two elements persists until a state of equilibrium is achieved, known as the flow-fiber coupling effect, which is delayed.

Metropolitan integration development refers to the interconnection between cities and the coordinated development of various aspects such as economy, society, culture, and nature, which is the goal of metropolitan area development. With the Zhengzhou metropolitan area as the research area and based on nighttime light data from 2012 to 2021, we comprehensively used landscape index and landscape morphology spatial pattern analysis methods, systematically evaluated the integration process of the metropolitan area from the perspective of spatial expansion and spatial connection, analyzed the spatiotemporal variations of the landscape pattern of the metropolitan area, and revealed the spatiotemporal expansion and connection patterns of the metropolitan area. The results showed that the area of the Zhengzhou metropolitan area expanded year by year from 2012 to 2021, with the number of landscape patches continuously increasing, showing an agglomeration phenomenon. In the metropolitan area, there was a trend towards stability and multi-directional coordinated growth. The contribution of non-central cities to expansion increased annually, while the expansion patterns of various constituent cities gradually shifted from internal filling to external expansion. The connection scale within the metropolitan area had been expanding annually, with enhanced intercity connections. Intercity connection belts and channels for material and information exchange were emerging, and the integrated network of urban agglomeration connections was gradually forming. Metropolitan integration planning provided positive guidance for the development of metropolitan areas. We should fully leverage the driving effects of metropolitan areas, pay attention to the integration of Zhengzhou-Kaifeng and Zhengzhou-Xuchang, promote the formation of emerging growth poles in Xinxiang and Jiaozuo, as well as regional coordinated development, strengthen the network of policies, economy, transportation, information, etc., and form a diversified and integrated development situation.

Injection molding is a highly nonlinear procedure that is easily influenced by various external factors, thereby affecting the stability of the product's quality. High-speed injection molding is required for production due to the rapid cooling characteristics of thin-walled parts, leading to increased manufacturing complexity. Consequently, establishing appropriate process parameters for maintaining quality stability in long-term production is challenging. This study selected a hot runner mold with a thin wall fitted with two external sensors, a nozzle pressure sensor and a tie-bar strain gauge, to collect data regarding the nozzle peak pressure, the timing of peak pressure, the viscosity index, and the clamping force difference value. The product weight was defined as the quality indicator, and a standardized parameter optimization process was constructed, including injection speed, V / P switchover point, packing, and clamping force. Finally, the optimized process parameters were applied to the adaptive process control experiments using the developed control system operated within the micro-controller unit (MCU). The results revealed that the control system effectively stabilized the product weight variation and standard deviation of 0.677% and 0.0178 g, respectively.

There are abundant local chronicles in the Qing Dynasty, which provide rich literature for the research on the production of medicinal materials. This paper collates the contents of Fuling in the local chronicles of the Qing Dynasty to reveal the distribution of Fuling in China at that time. The distribution of Fuling in the local chronicles of the Qing Dynasty involved 318 county-level regions in 23 provinces. The distribution records were mainly found in Yunnan, Anhui, Hunan, Zhejiang, Fujian, Jiangxi, Shaanxi, and Hubei. The local chronicles of the Qing Dynasty showed that Yunnan was the Dao-di producing area of Fuling, which was consistent with the materia medica of the Ming and Qing Dynasties. In the Qing Dynasty, the quality of Fuling in Dabie Mountains of Anhui was excellent, and it was called "Anling". The development of Anling benefited from the introduction of planting technology from Yunnan and the development of characteristic cultivation technology, with the formation of a complete industrial chain covering planting, processing, and sales. The abundant historical materials of Fuling in the local chronicles of the Qing Dynasty provide not only a documentary basis for revealing the changes of the Dao-di producing areas but also a historical context for the development of modern Fuling-producing areas such as Fujian, Jiangxi, and Hunan. In addition to the information of producing areas, the local records recorded the quality, commodity evaluation, and cultivation techniques of Fuling, filling the gaps in ancient materia medica books and providing detailed historical materials for understanding the producing areas and application of Fuling in the Qing Dynasty.

Strontium isotope(~(87)S/~(86)Sr) tracing technology has been widely used in animal remains and origin of modern food origin sources. However, due to the problems of sample contamination and cleaning, this technology has been applied less frequently in the tracing of plant remains. The Palace Museum preserves more than 1 000 relics of medicinal materials from the Forbidden City of the Qing Dynasty, which are rare precious materials for the study of Dao-di herbs. The well-preserved environment of these medicinal materials in the Forbidden City of the Qing Dynasty helps avoid external strontium contamination, making it possible to introduce strontium isotope technology in their tracing research. On this basis, this study discussed the principle of strontium isotope tracing technology and summarized the current research progress on tracing plant remains using strontium isotope. In addition, this study discussed three key problems and their respective solutions encountered when applying strontium isotope technology to the tracing research on medicinal materials from the Forbidden City of the Qing Dynasty: creating strontium isotope ratio maps, dealing with the wide range of traceable results, and addressing the sample contamination and cleaning challenges. The literature and historical materials of the Qing Dynasty are the important basis for understanding the distribution and application of Dao-di herbs in the Qing Dynasty. Based on literature research, the use of strontium isotope to trace the producing area of medicinal materials in the Forbidden City of the Qing Dynasty can provide physical evidence for relevant research. The combined evidence of historical materials and medicinal relics is expected to provide a new perspective for the study of Dao-di herbs in the Qing Dynasty and also provide a reference for the study of the revolution of Dao-di herbs producing areas.

Flavonoid C-glycosides are a class of natural products that are widely involved in plant defense responses and have diverse pharmacological activities. They are also important active ingredients of Dendrobium huoshanense. Flavanone synthase Ⅱ has been proven to be a key enzyme in the synthesis pathway of flavonoid C-glycosides in plants, and their catalytic product 2-hydroxyflavanone is the precursor compound for the synthesis of various reported flavonoid C-glycosides. In this study, based on the reported amino acid sequence of flavanone synthase Ⅱ, a flavanone synthase Ⅱ gene(DhuFNSⅡ) was screened and verified from the constructed D. huoshanense genome localization database. Functional validation of the enzyme showed that it could in vitro catalyze naringenin and pinocembrin to produce apigenin and chrysin, respectively. The open reading frame(ORF) of DhuFNSⅡ was 1 644 bp in length, encoding 547 amino acids. Subcellular localization showed that the protein was localized on the endoplasmic reticulum. RT-qPCR results showed that DhuFNSⅡ had the highest expression in stems, followed by leaves and roots. The expression levels of DhuFNSⅡ and other target genes in various tissues of D. huoshanense were significantly up-regulated after four kinds of abiotic stresses commonly encountered in the growth process, but the extent of up-regulation varied among treatment groups, with drought and cold stress having more significant effects on gene expression levels. Through the identification and functional analysis of DhuFNSⅡ, this study is expected to contribute to the elucidation of the molecular mechanism of the formation of quality metabolites of D. huoshanense, flavonoid C-glycosides, and provide a reference for its quality formation and scientific cultivation.

Poria(Fu Ling) is a bulk traditional Chinese medicine(TCM)with a long history and complex varieties. The royal medical records of the Qing Dynasty include multiple medicinal materials of Fu Ling, such as Bai Fu Ling(white Poria), Chi Fu Ling(rubra Poria), and Zhu Fu Ling(Poria processed with cinnabaris). The Palace Museum preserves 6 kinds of specimens including Fu Ling Ge(dried Poria), Bai Fu Ling, Chi Fu Ling, Zhu Fu Ling, Bai Fu Shen(white Poria cum Radix Pini), and Fu Shen Mu(Poria cum Radix Pini). After trait identification and textual research, we found that Fu Ling Ge was an intact sclerotium, which was processed into Fu Ling Pi(Poriae Cutis), Bai Fu Ling and other medicinal materials in the Palace. The Fu Ling in the Qing Dynasty Pa-lace was mainly from the tribute paid of the officials in Yunnan-Guizhou region. The tribute situation was stable in the whole Qing Dynasty, and changed in the late Qing Dynasty. The cultural relics of Fu Ling in the Qing Dynasty Palace confirm with the archival documents such as the royal medical records and herbal medicine books, providing precious historical materials for understanding Fu Ling in the Qing Dynasty and a basis for the restoration of the processing of the Fu Ling in the Qing Dynasty Palace.

Plastic foam molding methods include thermoforming, extrusion and injection molding. Injection foam molding is a one-time molding method with high production efficiency and good product quality. It is suitable for foamed plastic products with complex shapes and strict size requirements. It is also the main method for producing structural bubbles. In this investigation, we developed a structural foam injection molding technology using the gas supply equipment connected to the unique plasticizing mechanism of the injection machine and studied its influence on the specimens' melt rheology quality and foam structures. In the experiment, the forming material was polypropylene (PP), and the gas for mixing/forming foaming characteristics was nitrogen (N 2 ). Additionally, in order to observe the rheological properties of N 2 /melt mixing, a melt flow specimen mold cavity was designed and the change in the melt viscosity index was observed using a melt pressure sensing element installed at the nozzle position. With the nitrogen supply equipment connected to a unique plasticizing mechanism, the mixing of gas and molten plastic can be achieved at the screw plasticizing stage, where the foaming effect is realized during the melt-filling process due to the thermodynamic instability of the gas. It was also found that an increase in N 2 fill content increased melt fluidity, and the trend of melt pressure and melt viscosity index showed that the higher the gas content, the lower the trend. The foaming characteristic depends on the gas thermodynamic instability and the pressure release, so it can be seen from the melt fill path that, the greater the pressure near the gate, the lower the foaming amount and the internal structure (SEM) after molding; the farther from the gate, the greater the relative increase in the foaming growth/amount. This phenomenon will be more obvious when the N 2 fill content is increased.

The injection-molding process is a non-linear process, and the product quality and long-term production stability are affected by several factors. To stabilize the product quality effected by these factors, this research establishes a standard process parameter setup procedure and an adaptive process control system based on the data collected by a nozzle pressure sensor and a tie-bar strain gauge to achieve this goal. In this research, process parameters such as the V/P switchover point, injection speed, packing pressure, and clamping force are sequentially optimized based on the characteristics of the pressure profile. After the optimization process, this research defines the standard quality characteristics through the optimized process parameters and combines it with the adaptive process control system in order to achieve the purpose of automatic adjustment of the machine and maintain high-quality production. Finally, three different viscosity materials are used to verify the effectiveness of the optimization procedure and the adaptive process control system. With the system, the variation of product weight was reduced to 0.106%, 0.092%, and 0.079%, respectively.

Imported medicinal materials are an important part of Chinese medicinal resources. To be specific, about 10% of the around 600 commonly used Chinese medicinal materials are from abroad, and the introduction of foreign medicinal materials has promoted the development of Chinese medicine. Amid the advancement of reform and opening up and the "Belt and Road" Initiative, major headway has been made in the cross-border trade in China, bringing opportunities for the import of medicinal materials from border ports. However, for a long time, there is a lack of systematic investigation on the types of exotic medicinal materials at border ports. In the fourth national census of traditional Chinese medicine resources, National Resource Center for Chinese Materia Medica, China Academy of Chinese Medical Sciences, together with several organizations, investigated the nearly 40 border ports, Chinese medicinal material markets, and border trade markets in 6 provinces/autonomous regions in China for the first time and recorded the types, sources, circulation, and the transaction characteristics of imported medicinal materials. Moreover, they invited experts to identify the origins of the collected 237 medicinal materials. In addition, the status quo and the problems of the medicinal materials were summarized. This study is expected to lay a basis for clarifying the market and origins of imported medicinal materials as well as the scientific research on and supervision of them.

Ben Cao Tu Jing had 48 materia medica illustrations related to the regional names in Shandong province. It was found that 42 of them were plant medicinal materials, distributed in seven areas in Shandong province. This study examined these illustration of plant medicinal materials and found that 26 species of these illustration of plant medicinal materials were identified with three genera and 11 illustrations were unverified. Most materia medica illustrations relating to the regional names in Shandong province were found mainly in Yanzhou, Qizhou and Zizhou. This indicated that materia medica were widely used in these areas in the Northern Song Dynasty. The haustorium of Cuscuta Chinensis were depicted in the "Shanzhou Tu Si Zi" and the habitat of wild poriacocos was described. This showed that the illustrators of Ben Cao Tu Jing might have conducted fieldwork and reflected on the main principles about how to identify materia medica in Ben Cao Tu Jing Zou Chi . Inconsistencies were found between the illustrations and the expressions of plant medicinal materials in some illustrations, such as Gui Jiu, Ginsen and Shan Zhu Yu. This suggested that in the Northern Song Dynasty Stemmacantha Uniflora, Belamcanda chinensis might have been mixed up with Dysosma and Pinellia Pedatisecta might have been mixed up with Pinellia Ternata. This was in line with the compiling theories of Su Song that they could be recorded together when the illustrations and literature were inconsistent with each other.

Scientific injection molding technologies involve the integration and collaboration of cyber-physical systems and smart manufacturing. In order to achieve adaptive process control and production optimization, injection molding systems with real-time sensing have gradually become the development- and application-trend of smart injection molding. At the same time, this technology is a highly non-linear process in which many factors affect the product quality during long-run fabrication processes. Therefore, in order to grasp changes in the characteristics of plastic materials and product quality monitoring, the injection process has become an important research topic. We installed sensors in the molding machine (injection barrel, nozzle, and mold-cavity) to collect the melting pressure and used different materials (semi-crystalline and amorphous polymer; the melting-fill-index (MFI) is unified to 14.5 ± 0.5 g/10 min) to explore the influences of melting pressure variation and its viscosity index on the quality characteristics of molded products. The experiment reveals that a combination of barrel, nozzle, and mold-cavity sensing on the melt-pressure trend-based injection process-control incorporated with viscosity index monitoring can confirm the weight and shrinkage variation of the injection product. At the same time, the pressure and viscosity index value measured and calculated during the melt-filling of two materials with similar MI resulted in significant variations in the amorphous polymer. This study showed the possibility of mastering and controlling the rheology (barrel position) and shrinkage properties of polymers and successful application in various product-quality monitoring platforms.

Although photodynamic therapy (PDT) has been extensively studied as an established modality of cancer treatment, it still suffers from a few clinical limitations, such as skin phototoxicity and tumor hypoxia. To circumvent these hurdles, hollow silica mesoporous nanoparticles (HMSNs) loaded with photosensitizers were employed as the nanoplatform to construct multifunctional nanoparticles (NPs). Specifically, an ultra-uniform polydopamine (PDA) shell was highly controlled grown around HMSNs by photogenerated outwards-diffused 1 O 2 , followed by conjugation of folic acid-poly(ethylene glycol) and chelation of Fe 2+ ions. Thanks to the optimal thickness of light-absorbing PDA shell, the multifunctional NPs exhibited not only negligible skin phototoxicity but also efficient 1 O 2 generation and photothermal (PT)-enhanced • OH generation upon respective photoirradiation. Anti-tumor therapy was then performed on both 4 T1 tumor cells and tumor-bearing mice by the combination of 638 nm PDT and 808 nm PT-enhanced chemodynamic therapy (CDT). As a result, high therapeutic efficacy was achieved compared to single-modality therapy, with a cell inhibitory rate of 86% and tumor growth inhibition of 70.4% respectively. More interestingly, tumor metastasis was effectively inhibited by the synergetic treatment. These results convincingly demonstrate that our multifunctional NPs are very promising skin-safe PDT agents combined with CDT for efficient tumor therapy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Ben Cao Tu Jing had 38 materia medica illustrations related to the regional names in Zhejiang province. It was found that 30 of them were identified as being named after regional names in Zhejiang province, involving 20 families and 29 genera. One of the 38 materia medica illustrations was mineral medicine and seven of them were unverified. The twenty-five of these materia medica illustrations with regional names were found to be consistent with their names used today. Five of them came from similar names in Zhejiang province in the Northern Song Dynasty, another five of the 25 names were known with the names but not entity for the lack of full descriptions and drawings. It was found that the drawing and the text of "Ming Zhou Huang Yao" and "Qin Zhou Hong Yao" in Ben Cao Tu Jing were reversed. By comparing the materia medica illustrations related to regional names in Da Guan Ben Cao by Liu Jia and Zheng He Ben Cao by Zhang Huicun, the name and the illustration of "Jin Zhou Bei Mu" in Zheng He Ben Cao by Zhang Huicun was more believable than "Yue Zhou Bei Mu" in Da Guan Ben Cao by Liu Jia. "Tai Zhou Wu Yao" and "Zhe Ba Wei", as genuine medicinal materials in Zhejiang, can be traced back to the illustrations of "Tai Zhou Wu Yao", "Yue Zhou Bai Zhu", "Mu Zhou Mai Dong", "Wen Zhou Peng 'e Shu", "Yue Zhou Bei Mu" and "Tian Tai Wu Yao" in Ben Cao Tu Jing. These findings provided text and drawing literature of herbs in the Song Dynasty for the research of genuine medicinal materials and their characteristics in Zhejiang province. They also showed that the utilization and development of the resources of traditional Chinese medicine in Zhejiang in the Northern Song Dynasty mainly focused on the coastal areas.

Root size is a key trait in plant cultivation and can be influenced by the cultivation environment. However, physical evidence of root size change in a secular context is scarce due to the difficulty in preserving ancient root samples, and how they were modified during the domestication and cultivation stays unclear. About 100 ancient root samples of Panax notoginseng , preserved as tribute in the Palace Museum (A.D. 1636 to 1912, Qing dynasty), provided an opportunity to investigate the root size changes during the last 100 years of cultivation. The dry weight of ancient root samples (~120 tou samples, tou represents number of roots per 500 g dry weight) is 0.22-fold of the modern samples with the biggest size (20 tou samples). Transcriptome analysis revealed that PnGAP and PnEXPA4 were highly expressed in 20 tou samples, compared with the 120 tou samples, which might contribute to the thicker cell wall and a higher content of lignin, cellulose, and callose in 20 tou samples. A relatively lower content of dencichine and higher content of ginsenoside Rb 1 in 20 tou samples are also consistent with higher expression of ginsenoside biosynthesis-related genes. PnPHL8 was filtrated through transcriptome analysis, which could specifically bind the promoters of PnGAP, PnCYP716A47 , and PnGGPPS3 , respectively. The results in this study represent the first physical evidence of root size changes in P. notoginseng in the last 100 years of cultivation and contribute to a comprehensive understanding of how the cultivation environment affected root size, chemical composition, and clinical application., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Yu, Hua, Liao, Zheng, Jin, Peng, Cui, Huang and Yuan.)

This research developed an adaptive control system for injection molding process. The purpose of this control system is to adaptively maintain the consistency of product quality by minimize the mass variation of injection molded parts. The adaptive control system works with the information collected through two sensors installed in the machine only-the injection nozzle pressure sensor and the temperature sensor. In this research, preliminary experiments are purposed to find master pressure curve that relates to product quality. Viscosity index, peak pressure, and timing of the peak pressure are used to characterize the pressure curve. The correlation between product quality and parameters such as switchover position and injection speed were used to produce a training data for back propagation neural network (BPNN) to compute weight and bias which are applied on the adaptive control system. By using this system, the variation of part weight is maintained to be as low as 0.14%.

The use of Fu Shen and Fu Shen Mu as medicines has had a long history. Today Fu Shen is still taken as bulk medicinal materials, whereas Fu Shen Mu had disappeared in the medical market. Fu Shen, Yun Fu Shen, Bai Fu Shen, and Bao Mu Fu Shen were used in clinical application in the Qing Royals. Bai Fu Shen and Fu Shen Mu are still kept as speciment in the Palace Museum today. It was found that Bai Fu Shen in the Qing Royals was the same as Fu Shen after peeling and pine roots recorded in the herbal literatures of the Ming and Qing dynasties, with their character tests and historical analysis. It can be inferred that Fu Shen, Yun Fu Shen and Bai Fu Shen recorded in the Qing Royals were actually Fu Shen, with pine roots in sclerotia and after peeling and pine roots removed in processing. Bao Mu Fu Shen and Bao Fu Shen should refer to Fu Shen with pine roots. Fu Shen Mu should mean Fu Shen without white sclerotia and peel during processing. Fu Shen, currently used clinically, is Bao Mu Fu Shen in the Qing Dynasty. Fu Shen distinguishes greatly from Fu Shen Mu in their effects. Such identification and analysis of herbs provides a way of thinking for further hurb studies of the Qing Dynasty.

Processing equipment and parameters will highly influence the properties of long-fiber-reinforced injection-molded thermoplastic composites, leading to different fiber lengths and orientations. Thus, maintaining fiber length during the injection molding process is always a big challenge for engineers. This study uses long-glass-fiber-reinforced polypropylene with 25 mm fiber length and a special-built novel injection molding machine with a three-barrel injection unit, including a plasticizing screw, an injection plunger, and a packing plunger, to fabricate injection molding parts while retaining long fiber length. This study also discusses the influence of process parameters, such as back pressure, screw speed, melt temperature, and different flow paths, on the properties of long-glass-fiber-reinforced composites. The experiment results show that a higher screw speed and back pressure will reduce the fiber length in the injection-molded parts. However, using appropriate parameter settings can maintain the fiber length to more than 10 mm. It was found that by increasing the back pressure, the cross direction of the fiber orientation can be increased by up to 15% and the air trap volume fraction can be decreased by up to 86%. Setting appropriate back pressure under a low screw speed will increase the tensile strength. Finally, it was found that the single-edge-gate path results in a higher tensile strength than that of the single-sprue-gate path due to the retainment of longer fiber length in the injection-molded part.

Pueraria thomsonii has long been used in traditional Chinese medicine. Isoflavonoids are the principle pharmacologically active components, which are primarily observed as glycosyl-conjugates and accumulate in P. thomsonii roots. However, the molecular mechanisms underlying the glycosylation processes in (iso)flavonoid biosynthesis have not been thoroughly elucidated. In the current study, an O-glucosyltransferase (PtUGT8) was identified in the medicinal plant P. thomsonii from RNA-seq database. Biochemical assays of the recombinant PtUGT8 showed that it was able to glycosylate chalcone (isoliquiritigenin) at the 4-OH position and glycosylate isoflavones (daidzein, formononetin, and genistein) at the 7-OH or 4'-OH position, exhibiting no enzyme activity to flavonones (liquiritigenin and narigenin) in vitro. The identification of PtUGT8 may provide a useful enzyme catalyst for efficient biotransformation of isoflavones and other natural products for food or pharmacological applications., (Copyright © 2022 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.)

A total of 568 paintings of herbaceous plants and woody plants as medicine were involved in Ben Cao Tu Jing , accounting for 60% of the total drug illustrations and 76% of the botanical medicine paintings. These medicinal paintings can be classified into four types: original plant paintings, medicinal material paintings, plant and medicinal material paintings, and plant and their habitat paintings. The original plant paintings can be specifically divided into five sections: the whole plant paintings with roots, partial aerial part paintings with roots, plant paintings with ground lines, rootless plant paintings, and broken branch paintings. Among them, the drawings of " the broken branch paintings " and " the whole plant paintings with roots " are consistent with the basic principles of collecting plant specimens. Additionally, "the plant and medicinal material paintings " and "the medicinal material paintings "reflect that they were drawn based on the market survey of medicinal materials or collected medicinal materials specimens. These medicine painting demonstrate rich characteristics of medicinal plants and medicinal materials and a high artistic quality with realistic details.These paintings in Ben Cao Tu Jing echoes Tu Jing , combine the art of painting with the cognition ofnatural science, as the rudiment of early paintings of plant science.

In this study, the gene encoding the key enzyme 3-ketoacyl-CoA thiolase(KAT) in the fatty acid β-oxidation pathway of Atractylodes lancea was cloned. Meanwhile, bioinformatics analysis, prokaryotic expression and gene expression analysis were carried out, which laid a foundation for the study of fatty acid β-oxidation mechanism of A. lancea. The full-length sequence of the gene was cloned by RT-PCR with the specific primers designed according to the sequence information of KAT gene in the transcriptomic data of A. lancea and designated as AIKAT(GenBank accession number MW665111). The results showed that the open reading frame(ORF) of AIKAT was 1 323 bp, encoding 440 amino acid. The deduced protein had a theoretical molecular weight of 46 344.36 and an isoelectric point of 8.92. AIKAT was predicted to be a stable alkaline protein without transmembrane segment. The secondary structure of AIKAT was predicted to be mainly composed of α-helix. The tertiary structure of AIKAT protein was predicted by homology modeling method. Homologous alignment revealed that AIKAT shared high sequence identity with the KAT proteins(AaKAT2, CcKAT2, RgKAT and AtKAT, respectively) of Artemisia annua, Cynara cardunculus var. scolymus, Rehmannia glutinosa and Arabidopsis thaliana. The phylogenetic analysis showed that AIKAT clustered with CcKAT2, confirming the homology of 3-ketoacyl-CoA thiolase genes in Compositae. The prokaryotic expression vector pET-32 a-AIKAT was constructed and transformed into Escherichia coli BL21(DE3) for protein expression. The target protein was successfully expressed as a soluble protein of about 64 kDa. A real-time quantitative PCR analysis was performed to profile the AIKAT expression in different tissues of A. lancea. The results demonstrated that the expression level of AIKAT was the highest in rhizome, followed by that in leaves and stems. In this study, the full-length cDNA of AIKAT was cloned and expressed in E. coli BL21(DE3), and qRT-PCR showed the differential expression of this gene in different tissues, which laid a foundation for further research on the molecular mechanism of fatty acid β-oxidation in A. lancea.

In this study, fiber breaking behavior, fiber orientation, length variation, and changes in melt flow ability of long glass fiber reinforced polypropylene (L-FRP) composites under different mold cavity geometry, melt fill path, and plasticization parameters were investigated. The matrix material used was polypropylene and the reinforcement fibers were 25 mm long. An ultra-long-fiber composite injection molding machine (with a three-stage plunger and injection mechanism design) was used with different mold cavity geometry and plasticization parameters. Different screw speeds were used to explore the changes in fiber length and to provide a reference for setting fiber length and parameter combinations. Flow-length specimen molds with different specimen thickness, melt fill path, and gate design were used to observe the effect of plasticizing properties on the flow ability of the L-FRP composite materials. The experimental results showed that the use of an injection molding machine with a mechanism that reduced the amount of fiber breakage was advantageous. It was also found that an increase in screw speed increased fiber breakage, and 25 mm long fibers were shortened by an average of 50% (to 10 mm). Long fibers were more resistant to melt filling than short fibers. In addition, the thickness of the specimen and the gate design were also found to affect the filling process. The rounded angle gate and thick wall product decreased the flow resistance and assisted the flow ability and fiber distribution of the L-FRP injection molding.

The basic features of glandular and non-glandular trichomes on leaves of Artemisia argyi( germplasms from Qichun,Ningbo,Tangyin,and Anguo,respectively) and related species A. stolonifera were observed by scanning electron microscopy( SEM)and compared. There were significant differences in trichome characteristics of leaves at all parts of A. argyi and A. stolonifera,which were closely related to the difference in chemical components. The length of non-glandular trichomes and size of glandular trichomes on middle leaves were the stablest. A. argyi and A. stolonifera can be distinguished by the density of glandular trichome. Additionally,the four germplasms of A. argyi can be discriminated via the density and curvature of non-glandular trichome. The density of non-glandular trichomes was the highest in A. stolonifera. For A. argyi,the germplasm from Qichun had the highest density of non-glandular trichomes on the abaxial surfaces of upper leaves and that from Ningbo had the largest non-glandular trichome curvature. With regard to the germplasm from Anguo,the T-shaped non-glandular trichomes of long stalks on the adaxial surfaces of the middle leaves were lodging-susceptible,and those with slender heads were wave-like. Statistics results of A. argyi and A. stolonifera are as follows: largest glandular trichomes on the adaxial and abaxial surfaces and highest glandular trichome density on the abaxial surfaces of the lower leaves in A. argyi germplasm from Ningbo,highest density of non-glandular trichomes on the abaxial surfaces of upper leaves in A. stolonifera,and highest density of glandular trichomes and non-glandular trichomes on the adaxial surfaces of the upper leaves in A. argyi germplasm from Qichun. According to the observation result under fluorescence microscope( FM),flavonoids were closely related to the size and density of non-glandular trichomes and size of glandular trichomes. The fluorescence intensity was the strongest and fluorescence area was the largest for flavonoids in A. argyi germplasms from Qichun and Tangyin,while the fluorescence for flavonoids was the weakest in A. stolonifera. It was the first time to observe and analyze the trichome ultrastructure of A. argyi leaves at different positions by SEM and FM. This study clarifies the differences between A. stolonifera and four famous A. argyi germplasms,which provides new evidence for the microscopic identification of A. argyi and its related species and serves as a reference for the study of the relationship of A. argyi structure with its components and functions.

To ensure the use of aconite roots as much as possible in accordance with the traditional medication principles, this paper examines the species, origin and processing of the ancient aconite, attempting to provide a basis for the research and development of drugs in the perspective of "Jingdian Mingfang" (Chinese Classical Formulas). The study found that a species discovered after the Tang Dynasty, Aconitum carmichaelii Debx., became the mainstream of this species category. Following the Song Dynasty, this species became the main source of authentic aconite, called "Chuanwu". This species is also currently the source of aconite roots. From this situation, the dry daughter roots of Aconitum carmichaelii Debx. should be considered in the research and development of "Jingdian Mingfang", and the cultivation products of Sichuan Jiangyou and Shanxi Hanzhong as well.

A total of 223 pictures were included in Yangyi Daquan (, Complete Collection of Skin Diseases ) , a surgical masterpiece work with the most abundant image classification extant before the Republic of China. They can be divided into seven categories: the philosophical basis of Chinese medicine and the theory of five evolutive phases and six climatic factors, the figures of visceral manifestation, the figures of acupuncture and acupoint, the figures of diagnosis, the figures of disease, the figures of needle and instrument, and the figures of symbol, from basic to clinical, covering today's otolaryngology, stomatology, gynecology, andrology, pediatrics, dermatology, anorectal, infection, oncology, emergency, which originally belong to the scope of Chinese medicine surgery. The book is extremely rich in images, it has high clinical and academic value.

The research on the historical production areas of Dao-di herbs is of great value to the quality evaluation, production base and protection for geographic indications of Dao-di herbs. Current studies mostly focused on the sorting of written sources, but neglected the excavation of image records such as historical maps and topographic maps. This paper aims at exploreing the geographical scope and evolution mode of historical production area of the Dao-di herbs by combining the method of historical map labelling with the traditional literature and historical research methods. It can be divided into three steps: production area name extraction, historical map labelling and textual research on the historical production area of Dao-di herbs. This method may provide a better way to show the geographical scope and topographic features of the historical production areas of Dao-di herbs through historical maps labelling, which is essential to further explore the evolution of production areas of Dao-di herbs from ancient times to the present by comparing historical maps of different periods, and may be helpful to discover the reasons for the formation and evolution of historical producing areas of Dao-di herbs from different perspectives such as environment, climate, humanities, economy, policy, etc. In addition, the historical map database can be used for map labelling to help establish the relationship between the dynasties, historical names, and change cha-racteristics of the scope of the historical production areas of Dao-di herbs in the following research.

Based on the investigation of wild medicinal plant resources in Dexing city, Jiangxi province, and the collected plant specimens, which were identified by taxonomy, two new record species of geographical distribution were found, which are Meehania zheminensis A. Takano, Pan Li & G.-H. Xia and Corydalis huangshanensis L.Q.Huang & H.S.Peng. The voucher specimens are kept in Dexing museum of traditional Chinese medicine. In this paper, the new distribution species were reported, which provides valuable information for further enriching and supplementing the species diversity of medicinal plant resources in Jiangxi province.

Injection molding is a popular process for the mass production of polymer products, but due to the characteristics of the injection process, there are many factors that will affect the product quality during the long fabrication processes. In this study, an adaptive adjustment system was developed by C++ programming to adjust the V / P switchover point and injection speed during the injection molding process in order to minimize the variation of the product weight. Based on a series of preliminary experiments, it was found that the viscosity index and peak pressure had a strong correlation with the weight of the injection-molded parts. Therefore, the viscosity index and peak pressure are used to guide the adjustment in the presented control system, and only one nozzle pressure sensor is used in the system. The results of the preliminary experiments indicate that the reduction of the packing time and setting enough clamping force can decrease the variation of the injected weight without turning on the adaptive control system; meanwhile, the master pressure curve obtained from the preliminary experiment was used as the control target of the system. With this system, the variation of the product weight and coefficient of variation ( C V ) of the product weight can be decreased to 0.21 and 0.05%, respectively.

Bencao Tujing (, Illustration of Materia Medica ) presents the exchange and application of foreign medicine in the middle period of the Northern Song Dynasty. The description Bencao Tujing records foreign medicinal materials from 29 extraterritorial countries, and also recorded some foreign medicinal materials from wide areas such as the Silk Road, the Maritime Silk Road and minority areas. Bencao Tujing systematically recorded foreign varieties before the Song Dynasty which used domestic resources in the Song Dynasty; it also recorded a large number of varieties of domestic and foreign resources, including genuine medicinal materials from abroad. The paintings of some foreign varieties in Bencao Tujing were basically true. However, some figures of foreign medicinal variety have conjecture elements, and some foreign medicinal materials have detailed traits described but no corresponding figures. The book also truthfully recorded that some samples of foreign medicinal materials have not been investigated. Through the Bencao Tujing , it can be deduced that foreign medicinal materials have been integrated into the daily life of the Song Dynasty, and the court of the Song Dynasty paid great attention to the investigation of foreign medicinal materials. Bencao Tujing systematically summarized foreign medicinal materials which were introduced before the Northern Song Dynasty, and provided precious historical materials for studying foreign medicinal materials in the Song Dynasty.

Inheriting the medicinal illustrations in Bencao Tujing (, Illustration of Materia Medica ), the two picture books of Zhenghe Bencao (, Pharmacopoeia of the Zhenghe reign ) Huiming Sanctum edition and Daguan Bencao (, Pharmacopoeia of the Daguan reign ) Liu Jia edition show different styles and characteristics in illustrations. They present different art styles and features in medicinal illustrations of ores, plants and animals because of the regional influences from the south and the north. In the process of carving and printing the illustrations of the two classics, different attitudes lead to similarities in the outline and yet differences in details. Besides, the different artistic levels in carving and printing contribute to different artistic standards. Compared with the paintings created in Song Dynasty, more subtle features are lost in Zhenghe Bencao (Huiming Sanctum edition) than in Daguan Bencao (Liu Jia edition). Therefore, the Zhenglei Bencao (, Collected Classified Materia Medica ) Huiming Sanctum edition are much closer to the ones in Bencao Tujin g and the real medicinals as well than those in Daguan Bencao (Liu Jia edition).

Polygonatum cyrtonema is a famous bulk medicinal material which is the medicinal and edible homologous. With the implementation of the traditional Chinese medicine industry to promote precise poverty alleviation, the planting area of P. cyrtonema in Jinzhai is becoming larger and larger in recent years. Jinzhai is located in the Dabie Mountainous area, which is the largest mountain area and county in Anhui Province. The cultivation of P. cyrtonema is scattered, and the traditional Chinese medicine resources investigation is not only inefficient and accurate. In this study,the "Resource 3"(ZY-3) remote sensing image was used as the best observation phase,and the method of support vector machine classification was used. The method of parallelepiped, minimum distance, mahalanob is distance, maximum likelihood classification and neural net were used to classify and recognize the P. cyrtonema in the whole region. In order to determine the accuracy and reliability of classification results, the accuracy of six supervised classification results was evaluated by confusion matrix method, and the advantages and disadvantages of six supervised classification methods for extracting P. cyrtonema field planting area were compared and analyzed. The results showed that the method of support vector machine classification was more appropriate than that using other classification methods. It provides a scientific basis for monitoring the planting area of P. cyrtonemain field.

Dabie Mountain in Anhui province is a genuine producing area of Poria cocos, commonly known as Anling. Jinzhai county in Anhui province is a traditional producing area of P. cocos, and it is also a key county for poverty alleviation in Dabie Mountains. Poverty alleviation of traditional Chinese medicine producing area is an important measure to implement the major strategic deployment of the central government. The planting of P. cocos is helpful to promote the development of traditional Chinese medicine industry in Dabie Mountains and help poverty alleviation. P. cocos is a saprophytic fungus with special demands on soil and ecological environment, and its planting appears a scattered and irregular distribution. Traditional investigation methods are time-consuming and laborious, and the results are greatly influenced by subjective factors. In order to obtain the suitable planting area of P. cocos in Jinzhai county, according to the field survey, the research team has explored the regional, biological characteristics and cultivation methods of P. cocos in the county, and obtained the altitude distribution area suitable for the growth of P. cocos. Then, the MaxEnt niche model was used to analyze the relationship between ecological factors and distribution areas, and the potential distribution zoning of P. cocos in Jinzhai county was studied. Combined with the characteristics of P. cocos planting pattern, taking ZY-3 remote sensing image as the data source, the maximum likelihood method was used to extract the area that could be used for P. cocos cultivation in Jinzhai county, and the reason why artificial planting P. cocos was mainly distributed in the west of Jinzhai county was analyzed. The suitable regional classification of P. cocos in Jinzhai county was obtained by superposition of suitable altitude distribution area, MaxEnt analysis and area extracted from remote sensing image, which provided data support for the planting planning of P. cocos in Jinzhai county.

Dabie Mountains, a unique transition area of subtropical and warm temperate zone, span Anhui, Hubei and Henan pro-vinces with a humid and suitable climate. It is rich in traditional Chinese medicine resources including many Dao-di herbs, and has a profound culture of traditional Chinese medicine with many herbalists in the past. This paper combed the historical geography of Dabie Mountains and development vein of medicinal materials recorded in history, and a textual research on the historical evolution of Dao-di herbs and special herbs in Dabie Mountains was carried out. The administrative region of Dabie Mountains has been changing constantly in history, which includes 25 counties and districts of six cities in Anhui, Henan and Hubei provinces at present. Dabie Mountains abound in a variety of Chinese herbal medicines, which have been recorded in herbal works in the past dynasties and local chronicles in detail. The recorded Dao-di herbs Dendrobium huoshanense, Artemisia argyi, and Poria cocos are well-known in China, and the output of Gastrodia elata, Ganoderma lucidum, and P. cocos is in the forefront of the country. Additionally, there are still many local special herbs emerging in modern times. In a word, this paper reviewed development of historical geography and ancient records of medicinal materials in Dabie Mountains, and made a textual research on the Dao-di herbs and special herbs, will provide a reference for the mo-dern research and intellectual property protection of Dao-di herbs in Dabie Mountains.

Ben Cao Tu Jing is the earliest version of block-printed edition for herbals so far, with 933 medicinal paintings. In this paper, it analyzed the medicine paintings in the Fruit, Vegetable and Rice Sections of Ben Cao Tu Jing, as well as discussed the types of medicine paintings and relevant information when they were drawn. There are a total of 76 paintings in the fruits, vegetables and rice sections of Ben Cao Tu Jing, which can be divided into four types: broken branch paintings, ground paintings, rootless plant paintings and the whole plant with root paintings. The first three paintings were similar to the paintings of Tang and Song, and the paintings of the whole plant with root can be called the type of medicine paintings with Chinese characteristics created by Ben Cao Tu Jing. These four types of paintings had a profound impact on the later illustrations of medicinal materials, such as Lv Chan Yan Ben Cao, Jiu Huang Ben Cao, Ben Cao Pin Hui Jing Yao, Zhi Wen Ben Cao, Zhi Wu Ming Shi Tu Kao. The two types that had the greatest impact on later generations are the broken branch paintings and the whole plant with roots paintings, which had been inherited and developed in contemporary Chinese pharmacy books such as Zhong Yao Cai Pin Zhong Lun Shu and Zhong Hua Ben Cao. The paintings of the fruits, vegetables and rice sections are highly realistic and artistic, not only carrying the role of conveying medicinal knowledge, but also having unique aesthetic value. It can be inferred that the fruits, vegetables and rice sections had the participation of professional painters at least. In addition, through the highly consistent drawing styles of several sets of paintings, it is concluded that the paintings without place names were likely to be drawn uniformly by the editing team, and the local paintings may have been revised and improved by the editing team lately.

Long-fiber polymers offer the advantage of a lower production cost because specific tool designs are required for conventional injection molding equipment to produce long-fiber polymer parts. The use of long fibers allows relatively high fiber aspect ratios to be obtained, thereby enhancing composite stiffness, strength, creep endurance, and fatigue endurance. However, the multigate design of the injection-molded part can result in weldline formation during the molding process, which reduces the structural strength of the molded part. Therefore, in this study, the surface quality, fiber compatibility, and structural strength of long-glass-fiber-reinforced polypropylene (PP/LGF) injection-molded samples were compared in the use versus nonuse of a mold-cavity overflow-well area and the mold-face infrared heating method. The experimental results indicate that the mold-cavity overflow-well area more greatly improved the surface roughness of the PP/LGF molded samples. Moreover, the infrared heating of the mold-face decreased the weldline depth of the samples. Optical-microscopy images and mold-cavity pressure distributions indicated that the weldline tensile strength and the interface compatibility between fibers and melts at the weldline region during the molding stage were higher in the use than in the nonuse of the mold-cavity overflow-well and mold-face infrared heating method.

Rehmanniae Radix ( Dihuang in Chinese) is a commonly used medicinal herb in a long history, raw Dihuang, dried Dihuang, processed Dihuang and other varieties have been recorded in the classical prescriptions of past dynasties. In order to clarify the origin and variety evolution of different processed products of Dihuang in Chinese classical prescriptions, ancient herbal books were examined in this paper. Both ancient and modern Dihuang is derived from Rehmannia glutinosa Libosch . in Scrophulariaceae, and R . chingii Li has been used as local medication. Dihuang has been cultivated since the Southern and Northern Dynasties, and the cultivation technique was mature in the Tang and Song Dynasties. Huaiqing Prefecture of Henan Province has been regarded as its genuine producing area. "Dried Dihuang" in Shennong Bencao Jing (, Shennong ' s Classic of Materia Medica ) included raw Dihuang and processed Dihuang. Mingyi Bielu (, Alternative Records of Famous Physicians ) has described "raw Dihuang" and "Dried Dihuang" separately, in which "raw Dihuang" should be fresh Dihuang in modern times. Bencao Tujing (, Illustration of Materia Medica ) in the Song Dynasty has recorded "raw Dihuang" and "processed Dihuang" correspondingly. The "raw Dihuang" was similar to today's raw Dihuang. "Processed Dihuang" has been recorded in the prescriptions of the Qin and Han Dynasties, which was independently described in the Song Dynasty. The processing methods of processed Dihuang were various in the Ming Dynasty. Processed Dihuang mainly refers to the dried products after stewing with wine or steaming until dark, and the processing methods tend to be simplified in modern times. "Raw and dried Dihuang" and "dried and processed Dihuang" have been independently recorded first in ancient herbal books of the Ming Dynasty, which is the raw Dihuang and processed Dihuang, respectively. This paper has sorted out the varieties of Dihuang, providing a basis of herbology for the origin and processing of traditional Chinese medicinal materials of Dihuang.

Gastrodia Rhizoma, as a precious Chinese materia medica, has attracted the attention of Chinese materia medica experts in the past dynasties for the commercial specification and experimental identification, and has gradually formed a wealth of terms concerning commercial specification and experimental identification. Through combing the literatures of successive dynasties, this paper discussed the change of the commercial specification of the Gastrodiae Rhizoma and formation of its identifying terms. It has found that the Gastrodiae Rhizoma mainly came from the dried rhizomes of the Gastrodia elata f.elata before the Qing Dynasty. Since the Qing Dynasty, G. elata in Yunnan and Guizhou gradually arose and become one of sources of mainstream commodities. After that, G. elata f. glauca and G. elata f. elata were becoming the main sources of Gastrodiae Rhizoma. Before the large-scale cultivation of G. elata in the 1970 s, there is only wild G. elata over the country. In terms of commercial specification, they were often classified into Chunma and Dongma according to their harvest time. With the successful promotion of cultivation technology and the endangered wild resources of G. elata, the Dongma became the mainstream in the market. The adulterants of G. elata increased significantly in the 1960 s and 1970 s, in this period, the terms of experimental identification for G. elata also increased obviously. Experimental identification is distinctive in different times, therefore, studying experimental identification of medicinal materials helps to promote the development of the Chinese materia medica.

Through consulting the ancient herbs and medical books, combining with modern literature, this paper makes textual research on herbal medicine, and textual research on the name, origin, position and harvest and processing changes of the medicinal herbs in ancient classical prescriptions. According to research, Cinnamon medicinal materials were first listed in the Shennong's Herbal Classic, as the name of "Jungui" and "Mugui". Among them, Jungui has undergone the evolution of "Qungui-Jungui-Tonggui-Jungui". After the Northern and Southern Dynasties, a half-volume fatty "Gui" was added, but the usage of the three was no different. The names of Cinnamomi Ramulus and Cinnamomi Cortex did not appear until the Tang Dynasty, and they were preferably thick-skinned and with no cork cambium, and they were mostly used in the name of "Guixin"; Since the Song and Yuan Dynasties, the medicinal parts of cassia have gradually separated. Cinnamomi Cortex is the trunk bark of sapling or branch bark, the twig is Cinnamomi Ramulus, and the tenderest twig is Liugui, Song Dynasty unified the name as "Guizhi"; After the Ming and Qing Dynasties, Cinnamomi Cortex was used as the trunk bark, and Cinnamomi Ramulus was used as the tender twig; In modern times, the Chinese Pharmacopoeia stipulates that the Cinnamomi Ramulus is the young branch of C. cassia, which is Cinnamomum, and Cinnamomi Cortex was the dried trunk bark. From the plant morphology recorded in the previous herbals and the drawings, combined with the distribution of the origins described in the previous herbals, the mainstream plant used as a medicine in the past generations should be C. cassia, but there are other sect. Cinnamomum plants that are also used in medicine everywhere, such as C. chekiangensis, C. bejolghota, C. wilsonii, etc. Throughout the ages, different plant morphologies and medicinal traits have been used to distinguish different categories. The origins of the past dynasties are mostly present in Guangdong, Guangxi province and Vietnam, and are regarded as authentic. The methods for the harvest and processing of cinnamon medicinal materials are basically the same from ancient to modern times.

As a medicine, Heshouwu was first appeared in Kaibao Bencao in Song Dynasty, which was a traditional tonic medicine. In recent years, the hepatotoxicity of Heshouwu has attracted great attention of domestic and foreign scholars. This paper has carried out textual research on illustration, quality evaluation, toxic and side effects of the Heshouwu in the historical Bencao(materia medica) literature. Illustrations of Heshouwu in the historical Bencao literatures are basically Polygonum multiflorum. Only in Taiyixian Zhibencao Yaoxing Daquan and Tujie Bencao, illustrations of Heshouwu may be Pteroxygonum giraldii and Dioscorea bulbifera, respectively. Illustrations of Heshouwu in the historical Bencao literatures are quite different from those of the genus Cynanchum in Asclepiadaceae. In the biography of Heshouwu, the author has noticed the abnormal vascular bundle in the root tuber of Heshouwu, which was inherited by the historical Bencao literatures. This is also one of the evidences to infer that Heshouwu is from Polygonaceae plant P. multiflorum. The description of abnormal vascular bundle in the historical Bencao literatures has been developed and evolved into the term "brocaded patterns", and it is considered that "five petals are good". Furthermore, ancient medical scientists have noticed that there are toxic differences in different characters of Heshouwu, that is, "Heshouwu with abundant parenchyma cells, low fibrous and large is superior in quality", "the hard and fibrous root tuber of P. multiflorum has toxic side effects". In this paper, the germplasm and the theory of assessing the quality by distinguishing features of traditional Chinese medicinal materials of Heshouwu in the historical Bencao literatures are reviewed, which provides the basis of materia medica for the quality evaluation of Heshowu.

A series of Ru(II)-containing metallopolymers with different polypyridyl complexes, namely [Ru(N^N) 2 (L)](PF 6 ) 2 (L = bipyridine-branched polymer; N^N = bpy: 2,2'-bipyridine (Ru 1); phen: 1,10-phenanthroline (Ru 2); dpp: 4,7-diphenyl-1,10-phenanthroline (Ru 3)), were synthesized with the motive that adjusting π-conjugation length of ligands might produce competent luminescent oxygen probes. The three hydrophobic metallopolymers were studied with 1 H NMR, UV-Vis absorption, and emission spectroscopy, and then were utilized to prepare biocompatible nanoparticles (NPs) via a nanoprecipitation method. Luminescent properties of the NPs were investigated against dissolved oxygen by steady-state and time-resolved spectroscopy respectively. Luminescence quenching of the three NPs all followed a linear behavior in the range of 0-43 ppm (oxygen concentration), but Ru 3-NPs exhibited the highest oxygen sensitivity (82%) and longest emission wavelength (λ ex  = 460 nm; λ em  = 617 nm). In addition, external interferons from cellular environments (e.g., pH, temperature, and proteins) had been studied on Ru 3-NPs. Finally, dissolved oxygen in monolayer cells under normoxic/hypoxic conditions was clearly differentiated by using Ru 3-NPs as the luminescent sensor, and, more importantly, hypoxia within multicellular tumor spheroids was vividly imaged. These results suggest that such Ru(II)-containing metallopolymers are strong candidates for luminescent nanosensors towards hypoxia. Graphical abstract.

Photothermal therapy following microscopic temperature detection can avoid overheating effects or insufficient heating, and thus improve therapeutic efficacy. In this study, biocompatible dual-functional nanoparticles (NPs) are constructed from polypyrrole (PPy) and rhodamine B (RB) by a one-step modified polymerization method. The polypyrrole serves as a photothemal agent, and rhodamine B acts as a temperature-sensing probe. The polypyrrole-rhodamine B (PPy-RB) NPs possess a high photothermal effect on irradiation by 808 nm laser, and a competent temperature sensitivity for the real-time temperature monitoring based on the emission intensity response of rhodamine B. After acting on HepG2 cells, the PPy-RB NPs can effectively induce cancer cell death, and the microscopic temperature is monitored by fluorescence feedback from rhodamine B during PTT by laser confocal microscopy. Hence, the proposed approach can supply a facile and promising way for the fabrication of effective theranostic nanoplatforms assisted by self-monitoring of cancer therapeutic processes.

Through consulting the herbs and medical books of past dynasties, combining with modern literature and field investigation, this paper made textual research on the name, origin, producing area, harvesting and processing of Bupleuri Radix used in the Catalogue of Ancient Classical Prescriptions(the first batch).From Han to the Southern and Northern Dynasties, the source of Bupleuri Radix was a mixture of Bupleurum and Peucedanum, it's hard to define the origin of authentic products.In Tang Dynasty, Caryophyllaceae had been used as Bupleuri Radix. In Song Dynasty, it was clear that the genuine production area of Bupleuri Radix was Yinzhou, its origin was B. corzonerifolium and B. yinchowense.After the Ming Dynasty, B. chinense gradually became the mainstream. It has been confirmed that there were differences in the efficacy between Stellaria dichotoma in Caryophyllaceae and Bupleurum in Umbelliferae, however, the use of S. dichotoma is still attributed to Bupleuri Radix. In the Qing Dynasty, S. dichotoma was distinguished from Bupleuri Radix as another medicine. Among the prescriptions containing Bupleuri Radix included in the Catalogue of Classical Prescriptions in Ancient China(the first batch), the mainstream of genuine Bupleuri Radix should be B. scorzonerifolium and B. chinense. It is suggested that the genuine base of Bupleuri Radix should be selected according to the current resources and industrial development of Bupleuri Radix, and it should conform to the Chinese Pharmacopoeia.

In this study, fluorescence-encoded magnetic biocompatible nanoparticles (NPs) were constructed from CdSe@ZnS quantum dots (QDs) and Fe 3 O 4 nanoparticles with a one-step reprecipitation-encapsulation method. The resultant hybrid NPs exhibit small size (∼130 nm in diameter), highly bright QDs, two-color emissions (green and red) under single-wavelength excitation, easy separation with a magnet and efficient cellular internalization. Energy transfer between the incorporated QDs was studied to better tailor the encoded fluorescence, and 11 barcodes were obtained by adjusting the ratio of green and red QDs. We used four sets of the barcodes to tag specific cancer cells (HepG2) as a proof-of-concept, and distinguished each set according to respective overlayed fluorescence images using laser confocal microscopy. Moreover, the incorporated Fe 3 O 4 NPs endowed as-constructed optical barcode superparamagnetic property by T 2 -enhanced magnetic resonance effect with an r 2 value of 145.25 s -1 mM -1 at 3 T. These results suggest that the multifunctional NPs are very promising for discriminating different cells and dual-modality imaging.

The accumulation of chemical constituents of some medicinal plants, such as Paeonia ostii T. Hong et J. X. Zhang, Houpoëa officinalis (Rehder and E. H. Wilson) N. H. Xia and C. Y. Wu. and Atractylodes lancea (Thunb.) DC, can precipitate on the surface and form frosts after natural or artificial intervention. The characteristics of these three medicinal plants and their frosts were analyzed by light microscope, polarizing microscope, stereomicroscope, and metalloscope. The results of ordinary Raman of P. ostii and H. officinalis showed that the frosts of P. ostii matched paeonol, while that of H. officinalis matched magnolol and honokiol. In P. ostii and its frost, 19 peaks were identified by UPLC-Q/TOF-MS, and the main component was paeonol. Eleven components were identified in H. officinalis and its frosts, and the main components were magnolol and honokiol. A. lancea and its frosts were analyzed by gas chromatography-mass spectrometry (GC-MS), 21 were identified, and its main components were hinesol and β-eudesmol. These three medicinal plants accumulate compounds and precipitate frosts on the surface. The results show that the components of the frosts provide a basis for quality evaluation and research on similar medicinal plants, and reveals the scientific connotation of "taking the medicinal materials' precipitated frosts as the best" of P. ostii , H. officinalis , and A. lancea , to some extent.