Search

Bioinspired from cationic antimicrobial peptides, sequence-defined triazolium-grafted peptoid oligomers (6- to 12-mer) were designed to adopt an amphipathic helical polyproline I-type structure. Their evaluation on a panel of bacterial strains ( Escherichia coli , Pseudomonas aeruginosa , Staphylococcus aureus , and Enterococcus faecalis ), pathogenic fungi ( Candida albicans , Cryptococcus neoformans , and Aspergillus fumigatus ), and human cells (hRBC, BEAS-2B, Caco-2, HaCaT, and HepG2) enabled the identification of two heptamers with improved activity to selectively fight Staphylococcus aureus pathogens. Modulation of parameters such as the nature of the triazolium and hydrophobic/lipophilic side chains, the charge content, and the sequence length drastically potentiates activity and selectivity. Besides, the ability to block the proinflammatory effect induced by lipopolysaccharide or lipoteichoic acid was also explored. Finally, biophysical studies by circular dichroism and fluorescence spectroscopies strongly supported that the bactericidal effect of these triazolium-grafted oligomers was primarily due to the selective disruption of the bacterial membrane.

The extensive deposits of calcium carbonate (CaCO 3 ) generated by marine organisms constitute the largest and oldest carbon dioxide (CO 2 ) reservoir. These organisms utilize macromolecules like peptides and proteins to facilitate the nucleation and growth of carbonate minerals, serving as an effective method for CO 2 sequestration. However, the precise mechanisms behind this process remain elusive. In this study, we report the use of sequence-defined peptoids, a class of peptidomimetics, to achieve the accelerated calcite step growth kinetics with the molecular level mechanistic understanding. By designing peptoids with hydrophilic and hydrophobic blocks, we systematically investigated the acceleration in step growth rate of calcite crystals using in situ atomic force microscopy (AFM), varying peptoid sequences and concentrations, CaCO 3 supersaturations, and the ratio of Ca 2+ / HCO 3 - . Mechanistic studies using NMR, three-dimensional fast force mapping (3D FFM), and isothermal titration calorimetry (ITC) were conducted to reveal the interactions of peptoids with Ca 2+ and HCO 3 - ions in solution, as well as the effect of peptoids on solvation and energetics of calcite crystal surface. Our results indicate the multiple roles of peptoid in facilitating HCO 3 - deprotonation, Ca 2+ desolvation, and the disruption of interfacial hydration layers of the calcite surface, which collectively contribute to a peptoid-induced acceleration of calcite growth. These findings provide guidelines for future design of sequence-specific biomimetic polymers as crystallization promoters, offering potential applications in environmental remediation (such as CO 2 sequestration), biomedical engineering, and energy storage where fast crystallization is preferred., Competing Interests: Competing interests statement:The authors declare no competing interest.

Dynamics of epigenetic modifications such as acetylation and deacetylation of histone proteins have been shown to be crucial for the life cycle development and survival of Plasmodium falciparum, the deadliest malaria parasite. In this study, we present a novel series of peptoid-based histone deacetylase (HDAC) inhibitors incorporating nitrogen-containing bicyclic heteroaryl residues as a new generation of antiplasmodial peptoid-based HDAC inhibitors. We synthesized the HDAC inhibitors by an efficient multicomponent protocol based on the Ugi four-component reaction. The subsequent screening of 16 compounds from our mini-library identified 6i as the most promising candidate, demonstrating potent activity against asexual blood-stage parasites (IC 50 Pf3D7 = 30 nM; IC 50 PfDd2 = 98 nM), low submicromolar activity against liver-stage parasites (IC 50 PbEEF = 0.25 μM), excellent microsomal stability (t 1/2  > 60 min), and low cytotoxicity to HEK293 cells (IC 50  = 136 μM)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Masson SAS.. All rights reserved.)

Peptoids have emerged as a useful alternative to peptides. However, N -acylated peptoids have occasionally undergone truncation at the terminal peptoid unit under acidic conditions. We previously reported on the mechanistic and electronic aspects of the acid-catalyzed truncation of N -acylated peptoids. To gain further insight, we systematically investigated the conformational and electronic effects of the terminal side chains of peptoids. The n → π * interaction, based on cis/trans -amide bond conformation, is considered to be one of the determining factors. In this study, it was demonstrated that both conformational and electronic factors contribute to this unusual truncation.

Antimicrobial peptides (AMPs) represent promising therapeutic modalities against multidrug-resistant bacterial infections. As a mimic of natural AMPs, peptidomimetic oligomers like peptoids (i.e., oligo- N -substituted glycines) have been utilized for antimicrobials with resistance against proteolytic degradation. Here, we explore the conjugation of catalytic metal-binding motifs─the amino terminal Cu(II) and Ni(II) binding (ATCUN) motif─with cationic amphipathic antimicrobial peptoids to enhance their efficacy. Upon complexation with Cu(II) or Ni(II), the conjugates catalyzed hydroxyl radical generation, and 22 and 22-Cu exhibited over 10-fold improved selectivity compared to the parent peptoid, likely due to reduced hydrophobicity. Cu-ATCUN-peptoids caused bacterial membrane disruption, aggregation of intracellular biomolecules, DNA oxidation, and lipid peroxidation, promoting multiple killing mechanisms. In a mouse sepsis model, 22 demonstrated antimicrobial and anti-inflammatory efficacy with low toxicity. This study suggests a strategy to improve the potency of membrane-acting antimicrobial peptoids by incorporating ROS-generating motifs, thereby adding oxidative damage as a killing mechanism.

Bacterial infections have been a serious threat to mankind throughout history. Natural antimicrobial peptides (AMPs) and their membrane disruption mechanism have generated immense interest in the design and development of synthetic mimetics that could overcome the intrinsic drawbacks of AMPs, such as their susceptibility to proteolytic degradation and low bioavailability. Herein, by exploiting the self-assembly and pore-forming capabilities of sequence-defined peptoids, we discovered a family of low-molecular weight peptoid antibiotics that exhibit excellent broad-spectrum activity and high selectivity toward a panel of clinically significant Gram-positive and Gram-negative bacterial strains, including vancomycin-resistant Enterococcus faecalis (VREF), methicillin-resistant Staphylococcus aureus (MRSA), methicillin-resistant Staphylococcus epidermidis (MRSE), Escherichia coli , Pseudomonas aeruginosa , and Klebsiella pneumoniae . Tuning the peptoid side chain chemistry and structure enabled us to tune the efficacy of antimicrobial activity. Mechanistic studies using transmission electron microscopy (TEM), bacterial membrane depolarization and lysis, and time-kill kinetics assays along with molecular dynamics simulations reveal that these peptoids kill both Gram-positive and Gram-negative bacteria through a membrane disruption mechanism. These robust and biocompatible peptoid-based antibiotics can provide a valuable tool for combating emerging drug resistance.

Nanoparticle-mediated mRNA delivery has emerged as a promising therapeutic modality, but its growth is still limited by the discovery and optimization of effective and well-tolerated delivery strategies. Lipid nanoparticles containing charged or ionizable lipids are an emerging standard for in vivo mRNA delivery, so creating facile, tunable strategies to synthesize these key lipid-like molecules is essential to advance the field. Here, we generate a library of N-substituted glycine oligomers, peptoids, and undertake a multistage down-selection process to identify lead candidate peptoids as the ionizable component in our Nutshell nanoparticle platform. First, we identify a promising peptoid structural motif by clustering a library of >200 molecules based on predicted physical properties and evaluate members of each cluster for reporter gene expression in vivo. Then, the lead peptoid motif is optimized using design of experiments methodology to explore variations on the charged and lipophilic portions of the peptoid, facilitating the discovery of trends between structural elements and nanoparticle properties. We further demonstrate that peptoid-based Nutshells leads to expression of therapeutically relevant levels of an anti-respiratory syncytial virus antibody in mice with minimal tolerability concerns or induced immune responses compared to benchmark ionizable lipid, DLin-MC3-DMA. Through this work, we present peptoid-based nanoparticles as a tunable delivery platform that can be optimized toward a range of therapeutic programs.

Long-acting drug delivery systems are promising platforms to improve patient adherence to medication by delivering drugs over sustained periods and removing the need for patients to comply with oral regimens. This research paper provides a proof-of-concept for the development of a new optimized in situ forming injectable depot based on a tetrabenzylamine-tetraglycine-d-lysine-O-phospho-d-tyrosine peptoid-D-peptide formulation (( N Phe) 4 GGGGk(AZT)y(p)-OH). The chemical versatility of the peptoid-peptide motif allows low-molecular-weight drugs to be precisely and covalently conjugated. After subcutaneous injection, a hydrogel depot forms from the solubilized peptoid-peptide-drug formulation in response to phosphatase enzymes present within the skin space. This system is able to deliver clinically relevant concentrations of a model drug, the antiretroviral zidovudine (AZT), for 35 days in Sprague-Dawley rats. Oscillatory rheology demonstrated that hydrogel formation began within ∼30 s, an important characteristic of in situ systems for reducing initial drug bursts. Gel formation continued for up to ∼90 min. Small-angle neutron scattering data reveal narrow-radius fibers (∼0.78-1.8 nm) that closely fit formation via a flexible cylinder elliptical model. The inclusion of non-native peptoid monomers and D-variant amino acids confers protease resistance, enabling enhanced biostability to be demonstrated in vitro . Drug release proceeds via hydrolysis of an ester linkage under physiological conditions, releasing the drug in an unmodified form and further reducing the initial drug burst. Subcutaneous administration of ( N Phe) 4 GGGGk(AZT)y(p)-OH to Sprague-Dawley rats resulted in zidovudine blood plasma concentrations within the 90% maximal inhibitory concentration (IC 90 ) range (30-130 ng mL -1 ) for 35 days.

While plaques comprised of fibrillar Aβ aggregates are hallmarks of Alzheimer's disease, soluble Aβ oligomers present higher neurotoxicity. Thus, one therapeutic approach is to prevent the formation of Aβ oligomers and reduce their associated harmful effects. We have proposed a peptoid mimic of the Aβ hydrophobic KLVFF core as an ideal candidate aggregation inhibitor due to its ability to evade proteolytic degradation via repositioning of the side chain from the α-carbon to the amide nitrogen. This peptoid, JPT1, utilizes chiral sidechains to achieve a helical structure, while C-terminal addition of two phenylalanine residues places aromatic groups on two sides of the helix with spacing designed to facilitate interaction with amyloid β-sheet structure. We have previously shown that JPT1 modulates Aβ fibril formation. Here, we demonstrate that JPT1 also modulates Aβ oligomerization, and we explore the role of the charge on the linker between the KLVFF mimic and the extended aromatic residues. Additionally, we demonstrate that peptoid-induced changes in Aβ oligomerization correlate with attenuation of oligomer-induced nuclear factor-κB activation in SH-SY5Y human neuroblastoma cells. These findings support the therapeutic potential of peptoids to target early stages of Aβ aggregation and impact the associated Aβ-induced cellular response., (© 2024 The Authors. ChemBioChem published by Wiley-VCH GmbH.)

Hierarchical self-assembly represents a powerful strategy for the fabrication of functional materials across various length scales. However, achieving precise formation of functional hierarchical assemblies remains a significant challenge and requires a profound understanding of molecular assembly interactions. In this study, we present a molecular-level understanding of the hierarchical assembly of sequence-defined peptoids into multidimensional functional materials, including twisted nanotube bundles serving as a highly efficient artificial light harvesting system. By employing synchrotron-based powder X-ray diffraction and analyzing single crystal structures of model compounds, we elucidated the molecular packing and mechanisms underlying the assembly of peptoids into multidimensional nanostructures. Our findings demonstrate that incorporating aromatic functional groups, such as tetraphenyl ethylene (TPE), at the termini of assembling peptoid sequences promotes the formation of twisted bundles of nanotubes and nanosheets, thus enabling the creation of a highly efficient artificial light harvesting system. This research exemplifies the potential of leveraging sequence-defined synthetic polymers to translate microscopic molecular structures into macroscopic assemblies. It holds promise for the development of functional materials with precisely controlled hierarchical structures and designed functions., (© 2024 Battelle Memorial Institute and The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Histone deacetylase 6 (HDAC6) is an emerging drug target to treat oncological and non-oncological conditions. Since highly selective HDAC6 inhibitors display limited anticancer activity when used as single agent, they usually require combination therapies with other chemotherapeutics. In this work, we synthesized a mini library of analogues of the preferential HDAC6 inhibitor HPOB in only two steps via an Ugi four-component reaction as the key step. Biochemical HDAC inhibition and cell viability assays led to the identification of 1g (highest antileukemic activity) and 2b (highest HDAC6 inhibition) as hit compounds. In subsequent combination screens, both 1g and especially 2b showed synergy with DNA methyltransferase inhibitor decitabine in acute myeloid leukemia (AML). Our findings highlight the potential of combining HDAC6 inhibitors with DNA methyltransferase inhibitors as a strategy to improve AML treatment outcomes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

Building upon our previous study on peptoid-based antibacterials which showed good activity against Gram-positive bacteria only, herein we report the synthesis of 34 dimeric peptoid compounds and the investigation of their activity against Gram-positive and Gram-negative pathogens. The newly designed peptoids feature a di-hydrophobic moiety incorporating phenyl, bromo-phenyl, and naphthyl groups, combined with variable lengths of cationic units such as amino and guanidine groups. The study also underscores the pivotal interplay between hydrophobicity and cationicity in optimizing efficacy against specific bacteria. The bromophenyl dimeric guanidinium peptoid compound 10j showed excellent activity against S. aureus 38 and E. coli K12 with MIC of 0.8 μg mL -1 and 6.2 μg mL -1 , respectively. Further investigation into the mechanism of action revealed that the antibacterial effect might be attributed to the disruption of bacterial cell membranes, as suggested by tethered bilayer lipid membranes (tBLMs) and cytoplasmic membrane permeability studies. Notably, these promising antibacterial agents exhibited negligible toxicity against mammalian red blood cells. Additionally, the study explored the potential of 12 active compounds to disrupt established biofilms of S. aureus 38. The most effective biofilm disruptors were ethyl and octyl-naphthyl guanidinium peptoids (10c and 10 k). These compounds 10c and 10 k disrupted the established biofilms of S. aureus 38 with 51 % at 4x MIC (MIC = 17.6 μg mL -1 and 11.2 μg mL -1 ) and 56 %-58 % at 8x MIC (MIC = 35.2 μg mL -1 and 22.4 μg mL -1 ) respectively. Overall, this research contributes insights into the design principles of cationic dimeric peptoids and their antibacterial activity, with implications for the development of new antibacterial compounds., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Access to 1,2,3-triazolium-grafted peptoid macrocycles was developed by macrocyclization and multivalent postmodification of linear peptoid oligomers carrying an alternance of benzylic and propargyl groups as side chains. X-ray analysis and NMR studies revealed a conformational preference for constrained hairpin-shaped structures leading to the facial amphipathic character of these macrocycles. A preliminary evaluation showed the antimicrobial activities of these new cationic amphipathic architectures.

Inflammation processes of the central nervous system (CNS) play a vital role in the pathogenesis of several neurological and psychiatric disorders like depression. These processes are characterized by the activation of glia cells, such as microglia. Clinical studies showed a decrease in symptoms associated with the mentioned diseases after the treatment with anti-inflammatory drugs. Therefore, the investigation of novel anti-inflammatory drugs could hold substantial potential in the treatment of disorders with a neuroinflammatory background. In this in vitro study, we report the anti-inflammatory effects of a novel hexacyclic peptide-peptoid hybrid in lipopolysaccharide (LPS)-stimulated BV2 microglial cells. The macrocyclic compound X15856 significantly suppressed Interleukin 6 (IL-6), tumor necrosis factor-α (TNF-α), c-c motif chemokine ligand 2 (CCL2), CCL3, C-X-C motif chemokine ligand 2 (CXCL2), and CXCL10 expression and release in LPS-treated BV2 microglial cells. The anti-inflammatory effects of the compound are partially explained by the modulation of the phosphorylation of p38 mitogen-activated protein kinases (MAPK), p42/44 MAPK (ERK 1/2), protein kinase C (PKC), and the nuclear factor (NF)-κB, respectively. Due to its remarkable anti-inflammatory properties, this compound emerges as an encouraging option for additional research and potential utilization in disorders influenced by inflammation, such as depression.

A long-standing challenge in bioinspired materials is to design and synthesize synthetic materials that mimic the sophisticated structures and functions of natural biomaterials, such as helical protein assemblies that are important in biological systems. Herein, we report the formation of a series of nanohelices from a type of well-developed protein-mimetics called peptoids. We demonstrate that nanohelix structures and supramolecular chirality can be well-controlled through the side-chain chemistry. Specifically, the ionic effects on peptoids from varying the polar side-chain groups result in the formation of either single helical fiber or hierarchically stacked helical bundles. We also demonstrate that the supramolecular chirality of assembled peptoid helices can be controlled by modifying assembling peptoids with a single chiral amino acid side chain. Computational simulations and theoretical modeling predict that minimizing exposure of hydrophobic domains within a twisted helical form presents the most thermodynamically favorable packing of these amphiphilic peptoids and suggests a key role for both polar and hydrophobic domains on nanohelix formation. Our findings establish a platform to design and synthesize chiral functional materials using sequence-defined synthetic polymers., (© 2024. Battelle Memorial Institute.)

The design, synthesis, and fabrication of functional nanomaterials with specific properties remain a long-standing goal for many scientific fields. The self-assembly of sequence-defined biomimetic synthetic polymers presents a fundamental strategy to explore the chemical space beyond biological systems to create advanced nanomaterials. Moreover, subsequent chemical modification of existing nanostructures is a unique approach for accessing increasingly complex nanostructures and introducing functionalities. Of these modifications, covalent conjugation chemistries, such as the click reactions, have been the cornerstone for chemists and materials scientists. Herein, we highlight some recent advances that have successfully employed click chemistries for the postmodification of assembled one-dimensional (1D) and two-dimensional (2D) nanostructures to achieve applications in molecular recognition, mineralization, and optoelectronics. Specifically, biomimetic nanomaterials assembled from sequence-defined macromolecules such as peptides and peptoids are described.

Although antimicrobial peptides have been shown to inactivate viruses through disruption of their viral envelopes, clinical use of such peptides has been hampered by a number of factors, especially their enzymatically unstable structures. To overcome the shortcomings of antimicrobial peptides, peptoids (sequence-specific N-substituted glycine oligomers) mimicking antimicrobial peptides have been developed. We aimed to demonstrate the antiviral effects of antimicrobial peptoids against hepatitis B virus (HBV) in cell culture. The anti-HBV activity of antimicrobial peptoids was screened and evaluated in an infection system involving the HBV reporter virus and HepG2.2.15-derived HBV. By screening with the HBV reporter virus infection system, three (TM1, TM4, and TM19) of 12 peptoids were identified as reducing the infectivity of HBV, though they did not alter the production levels of HBs antigen in cell culture. These peptoids were not cytotoxic at the evaluated concentrations. Among these peptoids, TM19 was confirmed to reduce HBV infection most potently in a HepG2.2.15-derived HBV infection system that closely demonstrates authentic HBV infection. In cell culture, the most effective administration of TM19 was virus treatment at the infection step, but the reduction in HBV infectivity by pre-treatment or post-treatment of cells with TM19 was minimal. The disrupting effect of TM19 targeting infectious viral particles was clarified in iodixanol density gradient analysis. In conclusion, the peptoid TM19 was identified as a potent inhibitor of HBV. This peptoid prevents HBV infection by disrupting viral particles and is a candidate for a new class of anti-HBV reagents., Competing Interests: Declaration of competing interest A.E.B. is a shareholder and member of the Board of Directors of Maxwell Biosciences; N.M. is a consultant for Maxwell Biosciences., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Antimicrobial peptides (AMPs) exhibit mighty antibacterial properties without inducing drug resistance. Achieving much higher selectivity of AMPs towards bacteria and normal cells has always been a continuous goal to be pursued. Herein, a series of sulfonium-based polypeptides with different degrees of branching and polymerization were synthesized by mimicking the structure of vitamin U. The polypeptide, G 2 -PM-1 H+ , shows both potent antibacterial activity and the highest selectivity index of 16000 among the reported AMPs or peptoids (e.g., the known index of 9600 for recorded peptoid in "Angew. Chem. Int. Ed., 2020, 59, 6412."), which can be attributed to the high positive charge density of sulfonium and the regulation of hydrophobic chains in the structure. The antibacterial mechanisms of G 2 -PM-1 H+ are primarily ascribed to the interaction with the membrane, production of reactive oxygen species (ROS), and disfunction of ribosomes. Meanwhile, altering the degree of alkylation leads to selective antibacteria against either gram-positive or gram-negative bacteria in a mixed-bacteria model. Additionally, both in vitro and in vivo experiments demonstrated that G 2 -PM-1 H+ exhibited superior efficacy against methicillin-resistant Staphylococcus aureus (MRSA) compared to vancomycin. Together, these results show that G 2 -PM-1 H+ possesses high biocompatibility and is a potential pharmaceutical candidate in combating bacteria significantly threatening human health., (© 2023 Wiley-VCH GmbH.)

We have studied the complexation between cationic antimicrobials and polyanionic microgels to create self-defensive surfaces that responsively resist bacterial colonization. An essential property is the stable sequestration of the loaded (complexed) antimicrobial within the microgel under a physiological ionic strength. Here, we assess the complexation strength between poly(acrylic acid) [PAA] microgels and a series of cationic peptoids that display supramolecular structures ranging from an oligomeric monomer to a tetramer. We follow changes in loaded microgel diameter with increasing [Na + ] as a measure of the counterion doping level. Consistent with prior findings on colistin/PAA complexation, we find that a monomeric peptoid is fully released at ionic strengths well below physiological conditions, despite its +5 charge. In contrast, progressively higher degrees of peptoid supramolecular structure display progressively greater resistance to salting out, which we attribute to the greater entropic stability associated with the complexation of multimeric peptoid bundles.

The first synthesis of macrocyclic α-ABpeptoids with varying lengths is described. X-ray crystal structures reveal that cyclic trimer displays a chair-like conformation with a cct amide sequence and cyclic tetramer has a saddle-like structure with an uncommon cccc amide arrangement. The creation of a DNA-encoded combinatorial library of macrocyclic α-ABpeptoids is described.

Two-dimensional (2D) materials have attracted intense interest due to their potential for applications in fields ranging from chemical sensing to catalysis, energy storage, and biomedicine. Recently, peptoids, a class of biomimetic sequence-defined polymers, have been found to self-assemble into 2D crystalline sheets that exhibit unusual properties, such as high chemical stability and the ability to self-repair. The structure of a peptoid is close to that of a peptide except that the side chains are appended to the amide nitrogen rather than the α carbon. In this study, we investigated the effect of peptoid sequence on the mechanism and kinetics of 2D assembly on mica surfaces using in situ AFM and time-resolved X-ray scattering. We explored three distinct peptoid sequences that are amphiphilic in nature with hydrophobic and hydrophilic blocks and are known to self-assemble into 2D sheets. The results show that their assembly on mica starts with deposition of aggregates that spread to establish 2D islands, which then grow by attachment of peptoids, either monomers or unresolvable small oligomers, following well-known laws of crystal step advancement. Extraction of the solubility and kinetic coefficient from the dependence of the growth rate on peptoid concentration reveals striking differences between the sequences. The sequence with the slowest growth rate in bulk and with the highest solubility shows almost no detachment; i.e., once a growth unit attaches to the island edge, there is almost no probability of detaching. Furthermore, a peptoid sequence with a hydrophobic tail conjugated to the final carboxyl residue in the hydrophilic block has enhanced hydrophobic interactions and exhibits rapid assembly both in the bulk and on mica. These assembly outcomes suggest that, while the π-π interactions between adjacent hydrophobic blocks play a major role in peptoid assembly, sequence details, particularly the location of charged groups, as well as interaction with the underlying substrate can significantly alter the thermodynamic stability and assembly kinetics.

Controlling amide bond geometries and the secondary structures of β-peptoids is a challenging task as they contain several rotatable single bonds in their backbone. Herein, we describe the synthesis and conformational properties of novel "β-azapeptoids" with confined dihedrals. We discuss how the acylhydrazide sidechains in these molecules enforce trans amide geometries (ω ~180°) via steric and stereoelectronic effects. We also show that the Θ(C α -C β ) and Ψ(OC-C α ) backbone torsions of β-azapeptoids occupy a narrow range (170-180°) that can be rationalized by the staggered conformational preference of the backbone methylene carbons and a novel backbone n O →σ* Cβ-N interaction discovered in this study. However, the ϕ (C β -N) torsion remains freely rotatable and, depending on ϕ, the sidechains can be parallel, perpendicular, and anti-parallel relative to each other. In fact, we observed parallel and perpendicular relative orientations of sidechains in the crystal geometries of β-azapeptoid dimers. We show that ϕ of β-azapeptoids can be controlled by incorporating a bulky substituent at the backbone β-carbon, which could provide complete control over all the backbone dihedrals. Finally, we show that the ϕ and Ψ dihedrals of β-azapeptoids resemble that of a PPII helix and they retain PPII structure when incorporated in Host-guest proline peptides., (© 2023 Wiley-VCH GmbH.)

This study presents an efficient method for on-resin dimer generation through self-condensation of 3,3-dimethoxypropionic acid-modified molecules, resulting in 2-pyridones. The approach demonstrated remarkable versatility by producing homodimers of peptides, peptoids, and non-peptidic ligands. Its ease of application, broad utility, and mild reaction conditions not only hold significance for peptide and peptoid research but also offer potential for the on-resin development of a wide range of bivalent ligands., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Non-receptor tyrosine kinase of neonatal ABL (nABL) is distributed in the nucleus and cytoplasm of proliferating cells in embryo and neonate, and has been implicated in the pathogenesis of neonatal leukemia and other hematological diseases. The kinase contains a regulatory Src homology 3 (SH3) domain that can specifically recognize proline-rich peptide segments on its partner protein surface. In this study, we systematically investigated the N -substitution effect on the binding of an empirically designed proline-rich peptide p9 to nABL SH3 domain by integrating dynamics simulations, energetics calculations and fluorescence affinity assays. The p9 is an almost all proline-composed decapeptide, with only a sole tyrosine at its residue 4, which has been found to bind nABL SH3 domain at a micromolar level in a class I mode. Here, the non-key residues of p9 peptide were independently replaced by various N -substituted amino acids to create a systematic N -substitution profile, from which we can identify those favorable, neutral and unfavorable substitutions at each peptide residue. On this basis a combinatorial peptoid library was rationally designed by systematically combining the favorable N -substituted amino acids at non-key residues of p9 peptide, thus resulting in a number of its peptoid counterparts. The binding affinity of top peptoid hits was observed to be comparable with or improved moderately relative to p9 peptide, with K d ranging between 3.1 and 76 μM. Structural analysis revealed that the peptoids can be divided into exposed, polar and hydrophobic regions from N- to C-termini, in which the polar and hydrophobic regions confer specificity and stability to the domain-peptoid interaction, respectively. In addition, a designed peptoid was also observed to exhibit 5.3-fold SH3-selectivity for nABL over cSRC, suggesting that the N -substitution can be used to improve not only binding affinity but also recognition specificity of SH3 binders.Communicated by Ramaswamy H. Sarma.

N-alkylated glycine residues are the main constituent of peptoids and peptoid-peptide hybrids that are employed across the biomedical and materials sciences. While the impact of backbone N-alkylation on peptide conformation has been extensively studied, less is known about the effect of N-amination on the secondary structure propensity of glycine. Here, we describe a convenient protocol for the incorporation of N-aminoglycine into host peptides on solid support. Amide-to-hydrazide substitution also affords a nucleophilic handle for further derivatization of the backbone. To demonstrate the utility of late-stage hydrazide modification, we synthesized and evaluated the stability of polyproline II helix and β-hairpin model systems harboring N-aminoglycine derivatives. The described procedures provide facile entry into peptidomimetic libraries for conformational scanning., (Copyright © 2024. Published by Elsevier Inc.)

Abl is a nonreceptor tyrosine kinase involved in a variety of disease pathways such as rheumatic immune. Full-length Abl protein consists of a catalytic tyrosine kinase (TK) domain as well as two regulatory Src homology domains 2 and 3 (SH2 and SH3, respectively); the latter recognizes and binds to those natural proline-rich peptide segments containing a PxxP motif on the protein surface of its interacting partners. However, natural peptides cannot bind effectively to the modular domain in high affinity and strong selectivity due to their small size and broad specificity. Here, a synthetic proline-rich peptide p41 was used as template; its structural diversity was extended by combinationally replacing the Pro0 and Pro+3 residues with a number of N-substituted amino acids. Consequently, peptide affinity change upon the replacement was derived to create a systematic N-substituting perturbation profile, from which we identified several N-substitution combinations at the Pro0 and Pro+3 residues of p41 PxxP motif that may moderately or significantly improve the peptide binding potency to Abl; they represent potent peptoid binders of Abl SH3 domain, with affinity improved considerably relative to p41. More significantly, the designed potent peptoids were also found to exhibit a good SH3-selectivity for their cognate Abl over other noncognate nonreceptor tyrosine kinases, with S = 9.7-fold., Competing Interests: Declaration of competing interest The authors have nothing to disclose., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Cis-peptide bonds are rare in proteins, and building blocks less favorable to the trans-conformer have been considered destabilizing. Although proline tolerates the cis-conformer modestly among all amino acids, for collagen, the most prevalent proline-abundant protein, all peptide bonds must be trans to form its hallmark triple-helix structure. Here, using host-guest collagen mimetic peptides (CMPs), we discover that surprisingly, even the cis-enforcing peptoid residues (N-substituted glycines) form stable triple-helices. Our interrogations establish that these peptoid residues entropically stabilize the triple-helix by pre-organizing individual peptides into a polyproline-II helix. Moreover, noting that the cis-demanding peptoid residues drastically reduce the folding rate, we design a CMP whose triple-helix formation can be controlled by peptoid cis-trans isomerization, enabling direct targeting of fibrotic remodeling in myocardial infarction in vivo. These findings elucidate the principles of peptoid cis-trans isomerization in protein folding and showcase the exploitation of cis-amide-favoring residues in building programmable and functional peptidomimetics., (© 2023. The Author(s).)

Early detection of fatal and disabling diseases such as cancer, neurological and autoimmune dysfunctions is still desirable yet challenging to improve quality of life and longevity. Peptoids (N-substituted glycine oligomers) are a relatively new class of peptidomimetics, being highly versatile and capable of mimicking the architectures and the activities of the peptides but with a marked resistance to proteases and a propensity to cross the cellular membranes over the peptides themselves. For these properties, they have gained an ever greater interest in applications in bioengineering and biomedical fields. In particular, the present manuscript is to our knowledge the only review focused on peptoids for diagnostic applications and covers the last decade's literature regarding peptoids as tools for early diagnosis of pathologies with a great impact on human health and social behavior. The review indeed provides insights into the peptoid employment in targeted cancer imaging and blood-based screening of neurological and autoimmune diseases, and it aims to attract the scientific community's attention to continuing and sustaining the investigation of these peptidomimetics in the diagnosis field considering their promising peculiarities.

Since most tumors become resistant to drugs in a gradual and irreversible manner, making treatment less effective over time, anticancer drugs require continuous development. Peptoids are a class of peptidomimetics that can be easily synthesized and optimized. They exhibit a number of unique characteristics, including protease resistance, non-immunogenicity, do not interfere with peptide functionality and skeleton polarity, and can adopt different conformations. They have been studied for their efficacy in different cancer therapies, and can be considered as a promising alternative molecular category for the development of anticancer drugs. Herein, we discuss the extensive recent advances in peptoids and peptoid hybrids in the treatment of cancers such as prostate, breast, lung, and other ones, in the hope of providing a reference for the further development of peptoid anticancer drugs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The development of durable new antiviral therapies is challenging, as viruses can evolve rapidly to establish resistance and attenuate therapeutic efficacy. New compounds that selectively target conserved viral features are attractive therapeutic candidates, particularly for combating newly emergent viral threats. The innate immune system features a sustained capability to combat pathogens through production of antimicrobial peptides (AMPs); however, these AMPs have shortcomings that can preclude clinical use. The essential functional features of AMPs have been recapitulated by peptidomimetic oligomers, yielding effective antibacterial and antifungal agents. Here, we show that a family of AMP mimetics, called peptoids, exhibit direct antiviral activity against an array of enveloped viruses, including the key human pathogens Zika, Rift Valley fever, and chikungunya viruses. These data suggest that the activities of peptoids include engagement and disruption of viral membrane constituents. To investigate how these peptoids target lipid membranes, we used liposome leakage assays to measure membrane disruption. We found that liposomes containing phosphatidylserine (PS) were markedly sensitive to peptoid treatment; in contrast, liposomes formed exclusively with phosphatidylcholine (PC) showed no sensitivity. In addition, chikungunya virus containing elevated envelope PS was more susceptible to peptoid-mediated inactivation. These results indicate that peptoids mimicking the physicochemical characteristics of AMPs act through a membrane-specific mechanism, most likely through preferential interactions with PS. We provide the first evidence for the engagement of distinct viral envelope lipid constituents, establishing an avenue for specificity that may enable the development of a new family of therapeutics capable of averting the rapid development of resistance.

Antimicrobial peptides (AMPs) are promising therapeutics in the fight against multidrug-resistant bacteria. As a mimic of AMPs, peptoids with N-substituted glycine backbone have been utilized for antimicrobials with resistance against proteolytic degradation. Antimicrobial peptoids are known to kill bacteria by membrane disruption; however, the nonspecific aggregation of intracellular contents is also suggested as an important bactericidal mechanism. Here,structure-activity relationship (SAR) of a library of indole side chain-containing peptoids resulting in peptoid 29 as a hit compound is investigated. Then, quantitative morphological analyses of live bacteria treated with AMPs and peptoid 29 in a label-free manner using optical diffraction tomography (ODT) are performed. It is unambiguously demonstrated that both membrane disruption and intracellular biomass flocculation are primary mechanisms of bacterial killing by monitoring real-time morphological changes of bacteria. These multitarget mechanisms and rapid action can be a merit for the discovery of a resistance-breaking novel antibiotic drug., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Peptoids, or poly(N-substituted glycine)s, hold great promise in biomedical applications because of their biocompatibility, precise synthesis via conventional peptide-mimicking methods, and readily tunable side chains, which facilitate the control of hydrophobicity and crystallinity. In the past decade, peptoids have been used to create well-defined self-assemblies such as vesicles, micelles, sheets, and tubes, which have been scrutinized at the atomic scale using cutting-edge analytical techniques. This review highlights recent advancements in peptoid synthesis strategies and the development of noteworthy one- or two-dimensional anisotropic self-assemblies, i. e., nanotubes and nanosheets, exhibiting well-ordered molecular arrangements. These anisotropic self-assemblies are formed through the crystallization of peptoid side chains, which can be effortlessly modified via simple synthesis approaches. Moreover, leveraging the protease resistance of peptoids, various biomedical applications are discussed (including phototherapy, enzymatic mimetics, bio-imaging, and biosensing) that capitalize on the unique properties of anisotropic self-assembly., (© 2023 Wiley-VCH GmbH.)

Nanotechnology has assumed a significant role over the last decade in the development of various technologies applied to health sciences. This becomes even more evident with its application in controlled drug delivery systems. In this context, peptoids are a promising class of compounds for application as nanocarriers in drug delivery systems. These compounds can be obtained efficiently and with highly functionalized structural diversity via the Ugi 4-component reaction (U-4CR). Herein, we report the design of the process control strategy for the future development of lipid-peptoid-based customized drug delivery system assemblies. Over 20 lipid-peptoid nanocomposites were synthesized via the U-4CR in good to excellent yields. These products were successfully submitted to the nanoparticle formation by the emulsification-evaporation process from lipophilic solution and analyzed via Dynamic Light Scattering (DLS). Several molecules generated nanoparticles with a size ≤200 nm, making them good candidates for drug delivery systems, such as in cancer treatment., Competing Interests: The authors declare no conflict of interest.

Peptoids (N-substituted glycines) are a class of biomimetic polymers that have attracted significant attention due to their accessible synthesis and enzymatic and thermal stability relative to their naturally occurring counterparts (polypeptides). While these polymers provide the promise of more robust functional materials via hierarchical approaches, they present a new challenge for computational structure prediction for material design. The reliability of calculations hinges on the accuracy of interactions represented in the force field used to model peptoids. For proteins, structure prediction based on sequence and de novo design has made dramatic progress in recent years; however, these models are not readily transferable for peptoids. Current efforts to develop and implement peptoid-specific force fields are spread out, leading to replicated efforts and a fragmented collection of parameterized sidechains. Here, we developed a peptoid-specific force field containing 70 different side chains, using GAFF2 as starting point. The new model is validated based on the generation of Ramachandran-like plots from DFT optimization compared against force field reproduced potential energy and free energy surfaces as well as the reproduction of equilibrium cis/trans values for some residues experimentally known to form helical structures. Equilibrium cis/trans distributions (Kct) are estimated for all parameterized residues to identify which residues have an intrinsic propensity for cis or trans states in the monomeric state.

Peptoids are a class of highly customizable biomimetic foldamers that retain properties from both proteins and polymers. It has been shown that peptoids can adopt peptide-like secondary structures through the careful selection of sidechain chemistries, but the underlying conformational landscapes that drive these assemblies at the molecular level remain poorly understood. Given the high flexibility of the peptoid backbone, it is essential that methods applied to study peptoid secondary structure formation possess the requisite sensitivity to discriminate between structurally similar yet energetically distinct microstates. In this work, a generalizable simulation scheme is used to robustly sample the complex folding landscape of various 12mer polypeptoids, resulting in a predictive model that links sidechain chemistry with preferential assembly into one of 12 accessible backbone motifs. Using a variant of the metadynamics sampling method, four peptoid dodecamers are simulated in water: sarcosine, N-(1-phenylmethyl)glycine (Npm), (S)-N-(1-phenylethyl)glycine (Nspe), and (R)-N-(1-phenylethyl)glycine (Nrpe)─to determine the underlying entropic and energetic impacts of hydrophobic and chiral peptoid sidechains on secondary structure formation. Our results indicate that the driving forces to assemble Nrpe and Nspe sequences into polyproline type-I helices in water are found to be enthalpically driven, with small benefits from an entropic gain for isomerization and steric strain due to the presence of the chiral center. The minor entropic gains from bulky chiral sidechains in Nrpe- and Nspe-containing peptoids can be explained through increased configurational entropy in the cis state. However, overall assembly into a helix is found to be overall entropically unfavorable. These results highlight the importance of considering the many various competing interactions in the rational design of peptoid secondary structure building blocks.

N-substituted glycines (polypeptoids) containing chiral hydrophobic sidechains are known to fold into biomimetic alpha helices. These helix formers often produce conformationally heterogeneous structures and are difficult to characterize at a sub-nanometer resolution. Previously, peptoid N -1-phenylethyl ( S )-enantiomer sidechains (Nspe) were inferred from various experiments to form right-handed helices and (R)-enantiomers (Nrpe), left-handed helices. Prior computational work for N(s/r)pe oligomers has struggled to reproduce this trend. Herein, quantum mechanics calculations and molecular dynamics simulations are used to understand the origins of this discrepancy. Results from DFT and molecular mechanics calculations on a variety of Nspe and Nrpe oligomers as a function of chain length are in agreement, showing that Nspe and Nrpe prefer left- and right-handed helices, respectively. Additional metadynamics simulations are used to study Nrpe and Nspe oligomers folding in water. These results show that the free-energy driving forces for assembly into a helical backbone configuration are very small (within ∼ k B T ). Lastly, we compare DFT calculations for other experimentally characterized peptoid sidechains, N(r/s)sb, N(r/s)tbe, and N(r/s)npe. In this analysis, we show that peptoid sidechains determined to be more robust experimentally (tbe and npe) have helical preferences opposite the trend seen in less robust assemblies formed by N(r/s)pe and N(r/s)sb chemistries. The more robust tbe and nnpe favor the (S)-enantiomer to right-handed and the (R)-enantiomers to left-handed helices.

Peptoids (N-substituted glycines) are a group of highly controllable peptidomimetic polymers. Amphiphilic diblock peptoids have been engineered to assemble crystalline nanospheres, nanofibrils, nanosheets, and nanotubes with biochemical, biomedical, and bioengineering applications. The mechanical properties of peptoid nanoaggregates and their relationship to the emergent self-assembled morphologies have been relatively unexplored and are critical for the rational design of peptoid nanomaterials. In this work, we consider a family of amphiphilic diblock peptoids consisting of a prototypical tube-former (Nbrpm6Nc6, a NH 2 -capped hydrophobic block of six N -((4-bromophenyl)methyl)glycine residues conjugated to a polar NH 3 (CH 2 ) 5 CO tail), a prototypical sheet-former (Nbrpe6Nc6, where the hydrophobic block comprises six N -((4-bromophenyl)ethyl)glycine residues), and an intermediate sequence that forms mixed structures ((NbrpeNbrpm)3Nc6). We combine all-atom molecular dynamics simulations and atomic force microscopy to determine the mechanical properties of the self-assembled 2D crystalline nanosheets and relate these properties to the observed self-assembled morphologies. We find good agreement between our computational predictions and experimental measurements of Young's modulus of crystalline nanosheets. A computational analysis of the bending modulus along the two axes of the planar crystalline nanosheets reveals bending to be more favorable along the axis in which the peptoids stack by interdigitation of the side chains compared to that in which they form columnar crystals with π-stacked side chains. We construct molecular models of nanotubes of the Nbrpm6Nc6 tube-forming peptoid and predict a stability optimum in good agreement with experimental measurements. A theoretical model of nanotube stability suggests that this optimum is a free energy minimum corresponding to a "Goldilocks" tube radius at which capillary wave fluctuations in the tube wall are minimized.

Cis-trans isomerization of amide bonds impedes de novo design of folded peptoids (poly-N-substituted glycines) with precise secondary structures and affects peptoid-biomolecule binding affinity. Herein, from X-ray, NMR and DFT studies of azapeptoids, we have discovered a tetrel bonding interaction that stabilizes trans-peptoids. We show that peptoids having α-heteroatoms and N-aryl groups in the sidechain adopt trans-amide geometries due to the presence of a n X /π Ar →σ* Cα-N tetrel bonding interaction between the sidechain α-heteroatom lone pair (n X ) or π-electrons (π Ar ) and the σ* orbital of the backbone C α -N bond. Further, CD spectroscopic studies of oligo-proline host-guest model peptides showed that azapeptoid residues stabilize polyproline II helical conformation. These data indicate that the sidechain-backbone tetrel bonding could be leveraged to design peptoids with precise secondary structures for a wide range of biological and material applications., (© 2023 Wiley-VCH GmbH.)

Robust and cost-effective membrane-based separations are essential to solving many global crises, such as the lack of clean water. Even though the current polymer-based membranes are widely used for separations, their performance and precision can be enhanced by using a biomimetic membrane architecture that consists of highly permeable and selective channels embedded in a universal membrane matrix. Researchers have shown that artificial water and ion channels, such as carbon nanotube porins (CNTPs), embedded in lipid membranes can deliver strong separation performance. However, their applications are limited by the relative fragility and low stability of the lipid matrix. In this work, we demonstrate that CNTPs can co-assemble into two dimension (2D) peptoid membrane nanosheets, opening up a way to produce highly programmable synthetic membranes with superior crystallinity and robustness. A combination of molecular dynamics (MD) simulations, Raman spectroscopy, X-ray diffraction (XRD), and atomic force microscopy (AFM) measurements to verify the co-assembly of CNTP and peptoids are used and show that it does not disrupt peptoid monomer packing within the membrane. These results provide a new option for designing affordable artificial membranes and highly robust nanoporous solids., (© 2023 Wiley-VCH GmbH.)

Protein mimics such as peptoids form self-assembled nanostructures whose shape and function are governed by the side chain chemistry and secondary structure. Experiments have shown that a peptoid sequence with a helical secondary structure assembles into microspheres that are stable under various conditions. The conformation and organization of the peptoids within the assemblies remains unknown and is elucidated in this study via a hybrid, bottom-up coarse-graining approach. The resultant coarse-grained (CG) model preserves the chemical and structural details that are critical for capturing the secondary structure of the peptoid. The CG model accurately captures the overall conformation and solvation of the peptoids in an aqueous solution. Furthermore, the model resolves the assembly of multiple peptoids into a hemispherical aggregate that is in qualitative agreement with the corresponding results from experiments. The mildly hydrophilic peptoid residues are placed along the curved interface of the aggregate. The composition of the residues on the exterior of the aggregate is determined by two conformations adopted by the peptoid chains. Hence, the CG model simultaneously captures sequence-specific features and the assembly of a large number of peptoids. This multiscale, multiresolution coarse-graining approach could help in predicting the organization and packing of other tunable oligomeric sequences of relevance to biomedicine and electronics.

In the biological environment, mineral crystals exquisitely controlled by biomacromolecules often show intricate hierarchical structures and superior mechanical properties. Among these biominerals, spicules, hybrid silica/protein superstructures serving as skeletal elements in demosponges, represent an excellent example for motivating the synthesis of silica materials. Herein, by designing sequence-defined peptoids containing side chains with a strong binding to silica, we demonstrated that self-assembly of these peptoids into fiber structures enables the mimicking of both biocatalytic and templating functions of silicatein filaments for the formation of silica fibers at near-neutral pH and ambient temperature. We further showed that the presence of amino groups is significant for the nucleation of silica on self-assembled peptoid nanofibers. Molecular dynamics simulation further confirmed that having silica-binding of amino side chains is critical for self-assembled peptoid fibers in triggering silica formation. We demonstrated that tuning inter-peptoid interactions by varying carboxyl and amino side chains significantly influences the assembly kinetics and final morphologies of peptoid assemblies as scaffolds for directing silica mineralization to form silica spheres, fibers, and sheets. The formation of silica shell on peptoid fibers increased the mechanical property of peptoid hydrogel materials by nearly 1000-fold, highlighting the great potential of using silicification to enhance the mechanical property of hydrogel materials for applications including tissue engineering. Since peptoids are highly robust and programmable, we expect that self-assembly of peptoids containing solid-binding side chains into hierarchical materials opens new opportunities in the design and synthesis of highly tunable scaffolds that direct the formation of composite nanomaterials., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The ability to engineer synthetic polymers with the same structural precision as biomacromolecules is crucial to enable the de novo design of robust nanomaterials with biomimetic function. Peptoids, poly( N -substituted) glycines, are a highly controllable bio-inspired polymer family that can assemble into a variety of functional, crystalline nanostructures over a wide range of sequences. Extensive investigation on the molecular packing in these lattices has been reported; however, many key atomic-level details of the molecular structure remain underexplored. Here, we use cryo-TEM 3D reconstruction to directly visualize the conformation of an individual polymer chain within a peptoid nanofiber lattice in real space at 3.6 Å resolution. The backbone in the N -decylglycine hydrophobic core is shown to clearly adopt an extended, all- cis -sigma strand conformation, as previously suggested in many peptoid lattice models. We also show that packing interactions (covalent and noncovalent) at the solvent-exposed N-termini have a dominant impact on the local chain ordering and hence the ability of the chains to pack into well-ordered lattices. Peptoids in pure water form fibers with limited growth in the a direction (<14 molecules in width), whereas in the presence of formamide, they grow to over microns in length in the a direction. This dependence points to the significant role of the chain terminus in determining the long-range order in the packing of peptoid lattices and provides an opportunity to modulate lattice stability and nanoscale morphology by the addition of exogenous small molecules. These findings help resolve a major challenge in the de novo structure-based design of sequence-defined biomimetic nanostructures based on crystalline domains and should accelerate the design of functional nanostructures.

Cationic amphipathic structures are often utilized in natural membrane-active host-defense peptides. Negatively charged surface membranes of rapidly proliferating bacterial and cancer cells have been targeted by various synthetic peptides and peptidomimetics adopting the structural motif. Herein, we synthesized a set of conjugates composed of cationic amphipathic peptoids (i.e., oligo-N-substituted glycines) and a chlorin photosensitizer, named chlorin e6 (Ce6)-peptoid conjugates (CPCs). Among the nine CPCs, CPC 7, composed of Ce6, a PEG linker, and guanidine-rich helical amphipathic peptoids, exhibited a distinct photoresponsive inactivation of Gram-positive and Gram-negative bacteria. Subsequent studies showed that CPC 7 effectively killed various cancer cells after irradiation with red light (655 nm), suggesting the potential of CPC 7 as a dual antimicrobial and anticancer agent. Confocal laser scanning microscopy and flow cytometry data suggested that CPC 7 could induce apoptotic cell death. Our results show the potential of peptoid-based photosensitizer conjugates as a versatile platform for antimicrobial and anticancer photodynamic therapy agents and peptoid therapeutics., (© 2022. The Author(s), under exclusive licence to European Photochemistry Association, European Society for Photobiology.)

Peptide mimics, possessing excellent biocompatibility and protease stability, have attracted broad attention and research in the biomedical field. β-Peptides and β-peptoids, as two types of vital peptide mimics, have demonstrated great potential in the field of foldamers, antimicrobials and protein binding, etc. Currently, the main synthetic strategies for β-peptides and β-peptoids include solid-phase synthesis and polymerization. Among them, polymerization in one-pot can minimize the repeated separation and purification used in solid-phase synthesis, and has the advantages of high efficiency and low cost, and can synthesize β-peptides and β-peptoids with high molecular weight. This review summarizes the polymerization methods for β-peptides and β-peptoids. Moreover, future developments of the polymerization method for the synthesis of β-peptides and β-peptoids will be discussed., (© 2022 Wiley-VCH GmbH.)

Recent outbreaks of both new and existing infectious pathogens have threatened healthcare systems around the world. Therefore, it is vital to detect and neutralize pathogens to prevent their spread and treat infected patients. This consideration has led to the development of biosensors and antibiotics inspired by the structure and function of antibodies and antimicrobial peptides (AMPs), which constitute adaptive and innate immunity, efficiently protecting the human body against invading pathogens. Herein, we provide an overview of recent advances in the detection and neutralization of pathogens using protein-mimetic peptoid nanoarchitectures. Peptoids are bio-inspired and sequence-defined polymers composed of repeating N -substituted glycine units. They can spontaneously fold into well-defined three-dimensional nanostructures that encode chemical information depending on their sequences. Loop-functionalized peptoid nanosheets have been constructed by mimicking antibodies containing chemically variable loops as binding motifs for their respective target pathogen. Furthermore, by mimicking the cationic amphipathic features of natural AMPs, helical peptoids and their assemblies have been developed to achieve selective anti-infective activity owing to their intrinsic ability to interact with bacterial membranes and viral envelopes. We believe that this mini-review furnishes in-depth insight into how to construct protein-like nanostructures via the self-assembly of peptoids for application in the detection of pathogens and the treatment of infectious diseases for future healthcare applications.

Sequence-defined foldamers that self-assemble into well-defined architectures are promising scaffolds to template inorganic mineralization. However, it has been challenging to achieve robust control of nucleation and growth without sequence redesign or extensive experimentation. Here, peptoid nanotubes functionalized with a panel of solid-binding proteins are used to mineralize homogeneously distributed and monodisperse anatase nanocrystals from the water-soluble TiBALDH precursor. Crystallite size is systematically tuned between 1.4 and 4.4 nm by changing protein coverage and the identity and valency of the genetically engineered solid-binding segments. The approach is extended to the synthesis of gold nanoparticles and, using a protein encoding both material-binding specificities, to the fabrication of titania/gold nanocomposites capable of photocatalysis under visible-light illumination. Beyond uncovering critical roles for hierarchical organization and denticity on solid-binding protein mineralization outcomes, the strategy described herein should prove valuable for the fabrication of hierarchical hybrid materials incorporating a broad range of inorganic components., (© 2022 Wiley-VCH GmbH.)

Hybrid peptides with heterogeneous backbone are a class of peptide mimics with adjustable proteolytic stability obtained from incorporating unnatural amino acid residues into peptide backbone. α/β-peptides and peptide/peptoid hybrids are two types of hybrid peptides that are widely studied for diverse applications, and several synthetic methods have been developed. In this mini review, the advance in hybrid peptide synthesis is summarized, including solution-phase method, solid-phase method, and novel polymerization method. Conventional solution-phase method and solid-phase method generally result in oligomers with defined sequences, while polymerization methods have advantages in preparing peptide hybrid polymers with high molecular weight with simple operation and low cost. In addition, the future development of polymerization method to realize the control of the peptide hybrid polymer sequence is discussed., (© 2022 Wiley-VCH GmbH.)

Using a microwave-assisted protocol, we synthesized 16 peptoid-capped HDAC inhibitors (HDACi) with fluorinated linkers and identified two hit compounds. In biochemical and cellular assays, 10h stood out as a potent unselective HDACi with remarkable cytotoxic potential against different therapy-resistant leukemia cell lines. 10h demonstrated prominent antileukemic activity with low cytotoxic activity toward healthy cells. Moreover, 10h exhibited synergistic interactions with the DNA methyltransferase inhibitor decitabine in AML cell lines. The comparison of crystal structures of HDAC6 complexes with 10h and its nonfluorinated counterpart revealed a similar occupation of the L1 loop pocket but slight differences in zinc coordination. The substitution pattern of the acyl residue turned out to be crucial in terms of isoform selectivity. The introduction of an isopropyl group onto the phenyl ring provided the highly HDAC6-selective inhibitor 10p , which demonstrated moderate synergy with decitabine and exceeded the HDAC6 selectivity of tubastatin A.

Proteases, especially MMPs, are attractive biomarkers given their central role in both physiological and pathological processes. Distinguishing MMP activity with degradable substrates, however, is a difficult task due to overlapping substrate specificity profiles. Here, we developed a system of peptomers (peptide-peptoid hybrids) to probe the impact of non-natural residues on MMP specificity for an MMP peptide consensus sequence. Peptoids are non-natural, N -substituted glycines with a large side-chain diversity. Given the presence of a hallmark proline residue in the P3 position of MMP consensus sequences, we hypothesized that peptoids may offer N -substituted alternatives to generate differential interactions with MMPs. To investigate this hypothesis, peptomer substrates were exposed to five different MMPs, as well as bacterial collagenase, and monitored by fluorescence resonance energy transfer and liquid chromatography-mass spectrometry to determine the rate of cleavage and the composition of degraded fragments, respectively. We found that peptoid residues are well tolerated in the P3 and P3' substrate sites and that the identity of the peptoid in these sites displays a moderate influence on the rate of cleavage. However, peptoid residues were even better tolerated in the P1 substrate site where activity was more strongly correlated with side-chain identity than side-chain position. All MMPs explored demonstrated similar trends in specificity for the peptomers but exhibited different degrees of variability in proteolytic rate. These kinetic profiles served as "fingerprints" for the proteases and yielded separation by multivariate data analysis. To further demonstrate the practical application of this tunability in degradation kinetics, peptomer substrates were tethered into hydrogels and released over distinct timescales. Overall, this work represents a significant step toward the design of probes that maximize differential MMP behavior and presents design rules to tune degradation kinetics with peptoid substitutions, which has promising implications for diagnostic and prognostic applications using array-based sensors.

Two-dimensional (2D) arrays of gold nanoparticles that can freely float in water are promising materials for solution-based plasmonic applications like sensing. To be effective sensors, it is critical to control the interparticle gap distance and thus the plasmonic properties of the 2D arrays. Here, we demonstrate excellent control over the interparticle gap distance in a family of freely floating gold nanoparticle-embedded peptoid nanosheets. Nanosheets are made via monolayer assembly and collapse at the oil-water interface, allowing for fine control over the solution nanoparticle concentration during assembly. We used surface pressure measurements to monitor the assembly of the peptoid, nanoparticle, and combined system at the oil-water interface to determine a workable range of nanosheet assembly conditions suitable for controlling the interparticle gap distances within the nanosheets. These measurements revealed that the extent of nanoparticle adsorption to the peptoid monolayer can be tuned by varying the bulk nanoparticle concentration, but the ability for the monolayer to collapse into nanosheets is compromised at high nanoparticle concentrations. Peptoid nanosheets were synthesized with varying bulk nanoparticle concentrations and analyzed using light microscopy and UV-visible spectroscopy. Based on the spectral shift of the localized surface plasmon resonance peaks for the nanoparticles in the nanosheets relative to those well dispersed in toluene, we estimate that we can access interparticle gap distances within the nanosheet interior between 2.9 ± 0.5 and 9 ± 2 nm. Our results suggest that the minimum interparticle distance achievable by this method is limited by the nanoparticle ligand length, and so has the potential to be further tuned by varying the ligand chemical structure. The ability to quantitatively control and monitor the assembly conditions by this method provide an opportunity to readily tune the optoelectronic properties of this new class of 2D nanomaterial, making it a promising platform for plasmonic-based sensing applications.