Search

Control of robot end-effector (EE) Cartesian stiffness matrix (or the whole mechanical impedance) is still a challenging open issue in physical humanrobot interaction (pHRI). This paper presents an optimization approach for shaping the robot EE Cartesian stiffness. This research targets collaborative robots with intrinsic compliance - serial elastic actuators (SEAs). Although robots with SEAs have constant joint stiffness, task redundancy (null-space) for a specific task could be used for robot reconfiguration and shaping the stiffness matrix while still keeping the EE position unchanged. The method proposed in this paper to investigate null-space reconfiguration's influence on Cartesian robot stiffness is based on the Sequential Least Squares Programming (SLSQP) algorithm, which presents an expansion of the quadratic programming algorithm for nonlinear functions with constraints. The method is tested in simulations for 4 DOF planar robot. Results are presented for control of the EE Cartesian stiffness initially along one axis, and then control of stiffness along both planar axis - shaping the main diagonal of the EE stiffness matrix.

This paper investigates methods that leverage physical contact between a robot's structure and its environment to enhance task performance, with a primary emphasis on improving precision. Two main approaches are examined: solving the inverse kinematics problem and employing quadratic programming, which offers computational efficiency by utilizing forward kinematics. Additionally, geometrical methods are explored to simplify robot assembly and reduce the complexity of control calculations. These approaches are implemented on a physical robotic platform and evaluated in real-time applications to assess their effectiveness. Through experimental evaluation, this study aims to understand how environmental contact can be utilized to enhance performance across various conditions, offering valuable insights for practical applications in robotics.

In this paper, we propose a novel approach for the kinematic calibration of collaborative redundat robots, focusing on improving their precision using a cost-effective and efficient method. We exploit the redundancy of the closed-loop kinematic chain by utilizing a spherical joint, enabling precise definition of the robot end-effector position while maintaining free joint motion in the null space. Leveraging the availability of joint torque sensors in most collaborative robots, we employ a kinesthetic approach to obtain constrained joint motion for calibration. An optimization approach is utilized to determine the optimal kinematic parameters based on measured joint positions and a constrained end-effector position defined by the spherical joint. The effectiveness of the proposed method is demonstrated and validated on the Franka Emika Panda robot, a 7-DoF robot. Results indicate a significant enhancement in absolute accuracy, with comparable performance to more expensive sensor systems such as optical measurement systems. Our approach offers a practical and cost-effective solution for improving the precision of collaborative robots., (© 2023. Springer Nature Limited.)

Human-robot collaboration is one of the most challenging fields in robotics, as robots must understand human intentions and suitably cooperate with them in the given circumstances. But although this is one of the most investigated research areas in robotics, it is still in its infancy. In this paper, human-robot collaboration is addressed by applying a phase state system, guided by stable heteroclinic channel networks, to a humanoid robot. The base mathematical model is first defined and illustrated on a simple three-state system. Further on, an eight-state system is applied to a humanoid robot to guide it and make it perform different movements according to the forces exerted on its grippers. The movements presented in this paper are squatting, standing up, and walking forwards and backward, while the motion velocity depends on the magnitude of the applied forces. The method presented in this paper proves to be a suitable way of controlling robots by means of physical human-robot interaction. As the phase state system and the robot movements can both be further extended to make the robot execute many other tasks, the proposed method seems to provide a promising way for further investigation and realization of physical human-robot interaction.

The widely used stability parameter, the zero moment point (ZMP), which is usually defined on the ground, is redefined, in this paper, in two different ways to acquire a more general form that allows its application to systems that are not supported only on the ground, and therefore, their support polygon does not extend only on the floor. This way it allows to determine the stability of humanoid and other floating-based robots that are interacting with the environment at arbitrary heights. In the first redefinition, the ZMP is represented as a line containing all possible ZMPs, called the zero moment line (ZML), while in the second redefinition, the ZMP is represented as the ZMP angle, i.e., the angle between the ZML and the vertical line, passing through the center of mass (COM) of the investigated system. The first redefinition is useful in situations when the external forces and their acting locations are known, while the second redefinition can be applied in situations when the COM of the system under study is known and can be tracked. The first redefinition of the ZMP is also applied to two different measurements performed with two force plates, two force sensors, and the Optitrack system. In the first measurement, a subject stands up from a bench and sits down while being pulled by its hands, while in the second measurement, two subjects stand still, hold on to two double handles, and lean backward. In both cases, the stability of the subjects involved in the measurements is investigated and discussed.

Autonomous trajectory and torque profile synthesis through modulation and generalization require a database of motion with accompanying dynamics, which is typically difficult and time-consuming to obtain. Inspired by adaptive control strategies, this paper presents a novel method for learning and synthesizing Periodic Compliant Movement Primitives (P-CMPs). P-CMPs combine periodic trajectories encoded as Periodic Dynamic Movement Primitives (P-DMPs) with accompanying task-specific Periodic Torque Primitives (P-TPs). The state-of-the-art approach requires to learn TPs for each variation of the task, e.g., modulation of frequency. Comparatively, in this paper, we propose a novel P-TPs framework, which is both frequency and phase-dependent. Thereby, the executed P-CMPs can be easily modulated, and consequently, the learning rate can be improved. Moreover, both the kinematic and the dynamic profiles are parameterized, thus enabling the representation of skills using corresponding parameters. The proposed framework was evaluated on two robot systems, i.e., Kuka LWR-4 and Franka Emika Panda. The evaluation of the proposed approach on a Kuka LWR-4 robot performing a swinging motion and on Franka Emika Panda performing an exercise for elbow rehabilitation shows fast P-CTPs acquisition and accurate and compliant motion in real-world scenarios., (Copyright © 2020 Petrič.)

Research and development of active and passive exoskeletons for preventing work related injuries has steadily increased in the last decade. Recently, new types of quasi-passive designs have been emerging. These exoskeletons use passive viscoelastic elements, such as springs and dampers, to provide support to the user, while using small actuators only to change the level of support or to disengage the passive elements. Control of such devices is still largely unexplored, especially the algorithms that predict the movement of the user, to take maximum advantage of the passive viscoelastic elements. To address this issue, we developed a new control scheme consisting of Gaussian mixture models (GMM) in combination with a state machine controller to identify and classify the movement of the user as early as possible and thus provide a timely control output for the quasi-passive spinal exoskeleton. In a leave-one-out cross-validation procedure, the overall accuracy for providing support to the user was 86 . 72 ± 0 . 86 % (mean ± s.d.) with a sensitivity and specificity of 97 . 46 ± 2 . 09 % and 83 . 15 ± 0 . 85 % respectively. The results of this study indicate that our approach is a promising tool for the control of quasi-passive spinal exoskeletons.

This paper introduces a novel control framework for an arm exoskeleton that takes into account force of the human arm. In contrast to the conventional exoskeleton controllers where the assistance is provided without considering the human arm biomechanical force manipulability properties, we propose a control approach based on the arm muscular manipulability. The proposed control framework essentially reshapes the anisotropic force manipulability into the endpoint force manipulability that is invariant with respect to the direction in the entire workspace of the arm. This allows users of the exoskeleton to perform tasks effectively in the whole range of the workspace, even in areas that are normally unsuitable due to the low force manipulability of the human arm. We evaluated the proposed control framework with real robot experiments where subjects wearing an arm exoskeleton were asked to move a weight between several locations. The results show that the proposed control framework does not affect the normal movement behavior of the users while effectively reduces user effort in the area of low manipulability. Particularly, the proposed approach augments the human arm force manipulability to execute tasks equally well in the entire workspace of the arm.

While movement is essential to human wellbeing, we are still unable to reproduce the deftness and robustness of human movement in automatons or completely restore function to individuals with many types of motor impairment. To better understand how the human nervous system plans and controls movements, neuromechanists employ simple tasks such as upper extremity reaches and isometric force tasks. However, these simple tasks rarely consider impacts and may not capture aspects of motor control that arise from real-world complexity. Here we compared existing models of motor control with the results of a periodic targeted impact task extended from Bernstein's seminal work: hammering a nail into wood. We recorded impact forces and kinematics from 10 subjects hammering at different frequencies and with hammers with different physical properties (mass and face area). We found few statistical differences in most measures between different types of hammer, demonstrating human robustness to minor changes in dynamics. Because human motor control is thought to obey optimality principles, we also developed a feedforward optimal simulation with a neuromechanically inspired cost function that reproduces the experimental data. However, Fitts' Law, which relates movement time to distance traveled and target size, did not match our experimental data. We therefore propose a new model in which the distance moved is a logarithmic function of the time to move that yields better results ( R 2 ≥ 0.99 compared to R 2 ≥ 0.88). These results support the argument that humans control movement in an optimal way, but suggest that Fitts' Law may not generalize to periodic impact tasks.

In this paper we propose an exoskeleton control method for adaptive learning of assistive joint torque profiles in periodic tasks. We use human muscle activity as feedback to adapt the assistive joint torque behaviour in a way that the muscle activity is minimised. The user can then relax while the exoskeleton takes over the task execution. If the task is altered and the existing assistive behaviour becomes inadequate, the exoskeleton gradually adapts to the new task execution so that the increased muscle activity caused by the new desired task can be reduced. The advantage of the proposed method is that it does not require biomechanical or dynamical models. Our proposed learning system uses Dynamical Movement Primitives (DMPs) as a trajectory generator and parameters of DMPs are modulated using Locally Weighted Regression. Then, the learning system is combined with adaptive oscillators that determine the phase and frequency of motion according to measured Electromyography (EMG) signals. We tested the method with real robot experiments where subjects wearing an elbow exoskeleton had to move an object of an unknown mass according to a predefined reference motion. We further evaluated the proposed approach on a whole-arm exoskeleton to show that it is able to adaptively derive assistive torques even for multiple-joint motion.

Objectives: This paper presents the results of a realist evaluation that aimed to understand how, why and under what circumstances a Red Cross (RC) capacity-building intervention influences the motivation and the performance of RC community health volunteers involved in the delivery of an immunisation programme in Kampala, Uganda., Method: Given the complexity of the intervention, we adopted realist evaluation as our methodological approach and the case study as our study design. Data collection included document review, participant observation and interviews. The constant comparative method was used for the analysis. Two contrasted cases were selected within the five Kampala districts. Each case covers the management of the immunisation programme implemented at a RC branch. In each case, a programme manager and 15 RC volunteers were interviewed. The selection of the volunteers was purposive., Results: We found that a capacity-building programme including supervision supportive of autonomy, skills and knowledge enhancement, and adapted to the different subgroups of volunteers, leads to satisfaction of the three key drivers of volunteer motivation: feelings of autonomy, competence and connectedness. This contributes to higher retention, and better task performance and well-being among the volunteers. Enabling contextual conditions include the responsiveness of the Uganda Red Cross Society (URCS) to community needs, and recognition of the work of the volunteers, from the URCS and the community., Conclusions: A management approach that caters for the different motivational states and changing needs of the volunteers will lead to better performance. The findings will inform not only the management of community health volunteers, but also the management of all kinds of health workers., (Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/)

High precision Global Navigation Satellite System (GNSS) measurements are becoming more and more popular in alpine skiing due to the relatively undemanding setup and excellent performance. However, GNSS provides only single-point measurements that are defined with the antenna placed typically behind the skier's neck. A key issue is how to estimate other more relevant parameters of the skier's body, like the center of mass (COM) and ski trajectories. Previously, these parameters were estimated by modeling the skier's body with an inverted-pendulum model that oversimplified the skier's body. In this study, we propose two machine learning methods that overcome this shortcoming and estimate COM and skis trajectories based on a more faithful approximation of the skier's body with nine degrees-of-freedom. The first method utilizes a well-established approach of artificial neural networks, while the second method is based on a state-of-the-art statistical generalization method. Both methods were evaluated using the reference measurements obtained on a typical giant slalom course and compared with the inverted-pendulum method. Our results outperform the results of commonly used inverted-pendulum methods and demonstrate the applicability of machine learning techniques in biomechanical measurements of alpine skiing.

There are many everyday situations in which a supportive hand contact is required for an individual to counteract various postural perturbations. By emulating situations when balance of an individual is challenged, we examined functional role of supportive hand contact at different locations where balance of an individual was perturbed by translational perturbations of the support surface. We examined the effects of handle location, perturbation direction and perturbation intensity on the postural control and the forces generated in the handle. There were significantly larger centre-of-pressure (CoP) displacements for perturbations in posterior direction than for perturbations in anterior direction. Besides, the perturbation intensity significantly affected the peak CoP displacement in both perturbation directions. However, the position of the handle had no effects on the peak CoP displacement. On the contrary, there were significant effects of perturbation direction, perturbation intensity and handle position on the maximal force in the handle. The effect of the handle position was significant for the perturbations in posterior direction where the lowest maximal forces were recorded in the handle located at the shoulder height. They were comparable to the forces in the handle at eye height and significantly lower than the forces in the handle located either lower or further away from the shoulder. In summary, our results indicate that although the location of a supportive hand contact has no effect on the peak CoP displacement of healthy individuals, it affects the forces that an individual needs to exert on the handle in order to counteract support perturbations., (Copyright © 2014 Elsevier B.V. All rights reserved.)