Search

TH Nguyen Pham,1 Nigel A Lengkeek,2 Ivan Greguric,2 Byung J Kim,1 Paul A Pellegrini,2 Stephanie A Bickley,3 Marcel R Tanudji,3 Stephen K Jones,3 Brian S Hawkett,1 Binh TT Pham1 1Key Centre for Polymers and Colloids, School of Chemistry, University of Sydney, 2Radioisotopes and Radiotracers, NSTLI, Australian Nuclear Science and Technology Organisation, Sydney, 3Sirtex Medical Limited, North Sydney, NSW, Australia Abstract: Physiologically stable multimodality imaging probes for positron emission tomography/single-photon emission computed tomography (PET/SPECT)-magnetic resonance imaging (MRI) were synthesized using the superparamagnetic maghemite iron oxide (γ-Fe2O3) nanoparticles (SPIONs). The SPIONs were sterically stabilized with a finely tuned mixture of diblock copolymers with either methoxypolyethylene glycol (MPEG) or primary amine NH2 end groups. The radioisotope for PET or SPECT imaging was incorporated with the SPIONs at high temperature. 57Co2+ ions with a long half-life of 270.9 days were used as a model for the radiotracer to study the kinetics of radiolabeling, characterization, and the stability of the radiolabeled SPIONs. Radioactive 67Ga3+ and Cu2+-labeled SPIONs were also produced successfully using the optimized conditions from the 57Co2+-labeling process. No free radioisotopes were detected in the aqueous phase for the radiolabeled SPIONs 1 week after dispersion in phosphate-buffered saline (PBS). All labeled SPIONs were not only well dispersed and stable under physiological conditions but also noncytotoxic in vitro. The ability to design and produce physiologically stable radiolabeled magnetic nanoparticles with a finely controlled number of functionalizable end groups on the SPIONs enables the generation of a desirable and biologically compatible multimodality PET/SPECT-MRI agent on a single T2 contrast MRI probe. Keywords: magnetic resonance imaging, positron emission tomography, single-photon emission computed tomography, SPIONs, radiolabeling

Osteoarthritis is a common chronic disease and major cause of disability and chronic pain in ageing populations. In this pathology, the entire joint is involved, and the regeneration of articular cartilage still remains one of the main challenges. Here, we investigated the molecular mechanisms underlying cartilage regeneration in young mice using a full-thickness cartilage injury (FTCI) model. FTCI-induced cartilage defects were created in the femoral trochlea of young and adult C57BL/6 mice. To identify key molecules and pathways involved in the early response to cartilage injury, we performed RNA sequencing (RNA-seq) analysis of cartilage RNA at 3 days after injury. Young mice showed superior cartilage regeneration compared to adult mice after cartilage injury. RNA-seq analysis revealed significant upregulation of genes associated with the immune response, particularly in the IFN-γ signaling pathway and qRT-PCR analysis showed macrophage polarization in the early phase of cartilage regeneration (3 days) in young mice after injury, which might promote the removal of damaged or necrotic cells and initiate cartilage regeneration in response to injury. IFN-γR1- and IFN-γ-deficient mice exhibited impaired cartilage regeneration following cartilage injury. DMM-induced and spontaneous OA phenotypes were exacerbated in IFN-γR1 -/- mice than in wild-type mice. Our data support the hypothesis that IFN-γ signaling is necessary for cartilage regeneration, as well as for the amelioration of post-traumatic and age-induced OA., (© 2024. The Author(s).)

Background: Patients with suspected prostate cancer usually undergo transrectal ultrasound-guided (TRUS) systematic biopsy, which can miss relevant prostate cancers and lead to overtreatment., Aims: The aim of this study was to evaluate the detection rate for prostate cancer in MR-guided targeted biopsy (TB) and systematic biopsy (SB) in comparison with mpMRI of the prostate., Methods and Results: Three hundred and eight men who underwent mpMRI due to elevated PSA values between 2015 and 2020 were studied at university hospital Aachen, Germany. MRI-images were divided into cohorts with suspicious findings (PI-RADS ≥ 3) and negative findings (PI-RADS < 3). In patients with PI-RADS ≥ 3 TB combined with SB was performed. A part of this group underwent RP subsequently. In patients with PI-RADS < 3 and clinical suspicion SB was performed. In the PI-RADS ≥ 3 group (n = 197), TB combined with SB was performed in 194 cases. Three cases were lost to follow-up. Biopsy yielded 143 positive biopsies and 51 cases without carcinoma. TB detected 71% (102/143) and SB 98% (140/143) of the overall 143 carcinoma. Overall, 102 carcinomas were detected by TB, hereof 66% (67/102) clinically significant (Gleason ≥ 3+4) and 34% (35/102) clinically insignificant carcinoma (Gleason 3+3). SB detected 140 carcinomas, hereof 64% (90/140) csPCA and 36% (50/140) nsPCA. Forty-one of the overall 143 detected carcinoma were only found by SB, hereof 46% (19/41) csPCA and 54% (22/41) nsPCA. Tumor locations overlapped in 44% (63/143) between TB and SB. In 25% (36/143), SB detected additional tumor foci outside the target lesions. 70/143 patients subsequently underwent RP. The detection of tumor foci was congruent between mpMRI and prostatectomy specimen in 79% (55/70) of cases. Tumor foci were mpMRI occult in 21% (15/70) of cases. In the group with negative mpMRI (n = 111), biopsy was performed in 81 cases. Gleason ≥ 3+4 carcinoma was detected in 7% and Gleason 3+3 in 24% cases., Conclusion: There was a notable number of cases in which SB detected tumor foci that were mpMRI occult and could have been missed by TB alone. Therefore, additional systematic random biopsy is still required. A supplemental random biopsy should be considered depending on the overall clinical suspicion in negative mpMRI., (© 2024 The Authors. Cancer Reports published by Wiley Periodicals LLC.)

Although osteoarthritis (OA) is regarded as a disease of the articular cartilage, recent research has demonstrated alterations in periarticular muscles that surround the affected joint. Here, we investigated changes in periarticular muscle during the progression of OA, as well as the cause-and-effect relationship between muscle weakness and OA, in a mouse model of OA by destabilization of the medial meniscus (DMM). Pathological phenotypes in the periarticular muscles were assessed in the early and late stages of OA by DMM. OA pathology and pain behavior in the mice after DMM induction were examined in response to periarticular muscle weakness induced by multiple rounds of barium chloride (BaCl 2 ) injections. The examinations were also performed in myostatin knockout mice with strengthened muscle phenotypes by muscle hypertrophy. Morphological alterations in the tibialis anterior (TA) and quadriceps muscles in DMM mice included variations in muscle-fiber size, aberrant extracellular matrix (ECM) deposition, inflammatory cell infiltration, and decreased muscle mass. Periarticular muscle fibers isolated from DMM mice showed reductions in the number of satellite cells and myogenic capacity of primary myoblast, as well as proliferation. DMM + muscle injury mice also showed exacerbated joint degeneration compared to the DMM vehicles. Myostatin knockout mice were characterized by attenuated OA and the complete abrogation of pain behavior after DMM. Our results suggest an association between muscle weakness and OA progression and pain., (© 2023. The Author(s).)

As 3D-printed (3DP) patterns are solid and durable, they can be used to create thin wall castings, which is complicated with wax patterns because of the wax's fragility and high shrinkage ratio. According to this study's experiment results, polylactic acid (PLA), polyvinyl butyral (PVB), and castable wax (CW) are suitable materials for preparing investment casting (IC) cavities. The results indicate that the casting product with the highest-quality surface is obtained using a cavity prepared using a CW-printed pattern. PLA- and PVB-printed patterns provide a good surface finish for casted products. In addition, the roughness of both the printed and casted surfaces increases as the printing layer height increases. The roughness of the casted surface varies from 2.25 μm to 29.17 μm. This investigation also considers the correlation between the infill ratio and mechanical properties of PLA-printed patterns. An increase in the infill ratios from 0% to 100% leads to a significant increase in the tensile properties of the PLA-printed pattern. The obtained results can be practically used.

This work investigated the removal of antibiotic tetracycline (TC) from wastewater using nanocomposite material based on laterite modified with polyanion, polystyrene sulfonate (PSS). The effective factors influenced on the TC removal using nanocomposite PSS-modified laterite (NCPML) were optimized and found to be pH 4, solid-liquid ratio 5 mg/mL, and contact time 180 min. The highest removal of TC reached about 88% under the optimum adsorption conditions. The adsorption isotherm and kinetics of TC adsorption onto NCPML were in good agreement with the Langmuir and pseudo-second-order models, respectively. The characteristics of the NCPML material before and after TC adsorption were examined by zeta ( ζ ) potential measurements, Brunauer-Emmett-Teller (BET) method, and Fourier transform infrared spectroscopy (FT-IR). The TC adsorption onto NCPML was induced by electrostatic interaction, hydrogen bonding, and diffusion interaction. The TC removal from wastewater was approximately 94% while efficiency still reached 66% after five regenerations. Our research reveals that NCPML is a high-performance adsorbent for TC removal from wastewater., Competing Interests: The authors declare that there are no conflicts of interest regarding the publication of this paper., (Copyright © 2020 Thi Hau Vu et al.)

Cholesterol's effects on Na + ,K + -ATPase reconstituted in phospholipid vesicles have been extensively studied. However, previous studies have reported both cholesterol-mediated stimulation and inhibition of Na + ,K + -ATPase activity. Here, using partial reaction kinetics determined via stopped-flow experiments, we studied cholesterol's effect on Na + ,K + -ATPase in a near-native environment in which purified membrane fragments were depleted of cholesterol with methyl-β-cyclodextrin (mβCD). The mβCD-treated Na + ,K + -ATPase had significantly reduced overall activity and exhibited decreased observed rate constants for ATP phosphorylation (ENa 3 + → E2P, i.e. phosphorylation by ATP and Na + occlusion from the cytoplasm) and K + deocclusion with subsequent intracellular Na + binding (E2K 2 + → E1Na 3 + ). However, cholesterol depletion did not affect the observed rate constant for K + occlusion by phosphorylated Na + ,K + -ATPase on the extracellular face and subsequent dephosphorylation (E2P → E2K 2 + ). Thus, partial reactions involving cation binding and release at the protein's intracellular side were most dependent on cholesterol. Fluorescence measurements with the probe eosin indicated that cholesterol depletion stabilizes the unphosphorylated E2 state relative to E1, and the cholesterol depletion-induced slowing of ATP phosphorylation kinetics was consistent with partial conversion of Na + ,K + -ATPase into the E2 state, requiring a slow E2 → E1 transition before the phosphorylation. Molecular dynamics simulations of Na + ,K + -ATPase in membranes with 40 mol % cholesterol revealed cholesterol interaction sites that differ markedly among protein conformations. They further indicated state-dependent effects on membrane shape, with the E2 state being likely disfavored in cholesterol-rich bilayers relative to the E1P state because of a greater hydrophobic mismatch. In summary, cholesterol extraction from membranes significantly decreases Na + ,K + -ATPase steady-state activity., (© 2019 Garcia et al.)