Search

Driven by the potential to broaden the target space of conventional monospecific antibodies, the field of multi-specific antibody derivatives is growing rapidly. The production and screening of these artificial proteins entails a high combinatorial complexity. Antibody-domain exchange was previously shown to be a versatile strategy to produce bispecific antibodies in a robust and efficient manner. Here, we show that the domain exchange reaction to generate hybrid antibodies also functions under physiological conditions. Accordingly, we modified the exchange partners for use in therapeutic applications, in which two inactive prodrugs convert into a product with additional functionalities. We exemplarily show the feasibility for generating active T cell bispecific antibodies from two inactive prodrugs, which per se do not activate T cells alone. The two complementary prodrugs harbor antigen-targeting Fabs and non-functional anti-CD3 Fvs fused to IgG-CH3 domains engineered to drive chain-exchange reactions between them. Importantly, Prodrug-Activating Chain Exchange (PACE) could be an attractive option to conditionally activate therapeutics at the target site. Several examples are provided that demonstrate the efficacy of PACE as a new principle of cancer immunotherapy in vitro and in a human xenograft model.

The natural capacity of extracellular vesicles (EVs) to transport their payload to recipient cells has raised big interest to repurpose EVs as delivery vehicles for xenobiotics. In the present study, bovine milk-derived EVs (BMEVs) were investigated for their potential to shuttle locked nucleic acid-modified antisense oligonucleotides (LNA ASOs) into the systemic circulation after oral administration. To this end, a broad array of analytical methods including proteomics and lipidomics were used to thoroughly characterize BMEVs. We found that additional purification by density gradients efficiently reduced levels of non-EV associated proteins. The potential of BMEVs to functionally transfer LNA ASOs was tested using advanced in vitro systems (i.e. hPSC-derived neurons and primary human cells). A slight increase in cellular LNA ASO internalization and target gene reduction was observed when LNA ASOs were delivered using BMEVs. When dosed orally in mice, only a small fraction (about 1% of total administered dose) of LNA ASOs was recovered in the peripheral tissues liver and kidney, however, no significant reduction in target gene expression (i.e. functional knockdown) was observed.

T-cell bispecific antibodies (TCBs) crosslink tumor and T-cells to induce tumor cell killing. While TCBs are very potent, on-target off-tumor toxicity remains a challenge when selecting targets. Here, we describe a protease-activated anti-folate receptor 1 TCB (Prot-FOLR1-TCB) equipped with an anti-idiotypic anti-CD3 mask connected to the anti-CD3 Fab through a tumor protease-cleavable linker. The potency of this Prot- FOLR1-TCB is recovered following protease-cleavage of the linker releasing the anti-idiotypic anti-CD3 scFv. In vivo, the Prot-FOLR1-TCB mediates antitumor efficacy comparable to the parental FOLR1-TCB whereas a noncleavable control Prot-FOLR1-TCB is inactive. In contrast, killing of bronchial epithelial and renal cortical cells with low FOLR1 expression is prevented compared to the parental FOLR1-TCB. The findings are confirmed for mesothelin as alternative tumor antigen. Thus, masking the anti-CD3 Fab fragment with an anti-idiotypic mask and cleavage of the mask by tumor-specific proteases can be applied to enhance specificity and safety of TCBs., The clinical application of T cell bispecific antibodies (TCBs) is often limited by the lack of tumour-specific antigens. In this study, the authors present a strategy to increase TCB tumour-selectivity by adding an anti-CD3 moiety that can be specifically activated by tumor specific proteases in the tumor microenvironment.

Graphical abstract Contorsbodyis an IgG-derived format which has both Fab arms tethered in close proximity to the carboxy-terminus of the CH3 domain of the Fc. Contorsbodiescan be produced by technologies applicable to regular antibodies. They have a very compact shape which favor dimerization of receptors and can elicit agonistic functionality., The careful design of the antibody architecture is becoming more and more important, especially when the purpose is agonism. We present the design of a novel antibody format that is able to promote receptor dimerization and induce signal transduction resulting in cell proliferation. Mono-specific bivalent Y-shape IgGs made of two light chains and two heavy chains are engineered into single chain dimers of two modified heavy chains, resulting in the fixation of the two Fab fragments along the Fc dimerizing moiety. By this, an antagonist of the Her-receptor family, Trastuzumab, is re-formatted into an agonist by simply incorporating the original binding motif into a different geometrically and sterically constrained conformation. This novel format, named Contorsbody, retains antigen binding properties of the parental IgGs and can be produced by standard technologies established for recombinant IgGs. Structural analyses using molecular dynamics and electron microscopy are described to guide the initial design and to confirm the Contorsbody as a very compact molecule, respectively. Contorsbodies show increased rigidity compared to IgGs and their Fab moieties are positioned parallel and adjacent to each other. This geometry has an increased potential to trigger cell surface antigen or receptor ‘cis’-dimerization without ‘trans’-bridging of cells or mere receptor blockade.

High specificity accompanied with the ability to recruit immune cells has made recombinant therapeutic antibodies an integral part of drug development. Here we present a generic approach to generate two novel IgG-derived antibody formats that are based on a modification of the CrossMab technology. MoAbs harbor two heavy chains (HCs) resulting in one binding entity and one fragment crystallizable region (Fc), whereas DuoMabs are composed of four HCs harboring two binding entities and two Fc regions linked at a disulfide-bridged hinge. The latter bivalent format is characterized by avidity-enhanced target cell binding while simultaneously increasing the ‘Fc-load’ on the surface. DuoMabs were shown to be producible in high yield and purity and bind to surface cells with affinities comparable to IgGs. The increased Fc load directed at the surface of target cells by DuoMabs modulates their antibody-dependent cell-mediated cytotoxicity competency toward target cells, making them attractive for applications that require or are modulated by FcR interactions.

Purpose Immunogenicity against biotherapeutics can lead to the formation of drug/anti-drug-antibody (ADA) immune complexes (ICs) with potential impact on safety and drug pharmacokinetics (PK). This work aimed to generate defined drug/ADA ICs, characterized by quantitative (bio) analytical methods for dedicated determination of IC sizes and IC profile changes in serum to facilitate future in vivo studies. Methods Defined ICs were generated and extensively characterized with chromatographic, biophysical and imaging methods. Quantification of drug fully complexed with ADAs (drug in ICs) was performed with an acid dissociation ELISA. Sequential coupling of SEC and ELISA enabled the reconstruction of IC patterns and thus analysis of IC species in serum. Results Characterization of generated ICs identified cyclic dimers, tetramers, hexamers, and larger ICs of drug and ADA as main IC species. The developed acid dissociation ELISA enabled a total quantification of drug fully complexed with ADAs. Multiplexing of SEC and ELISA allowed unbiased reconstruction of IC oligomeric states in serum. Conclusions The developed in vitro IC model system has been properly characterized by biophysical and bioanalytical methods. The specificity of the developed methods enable discrimination between different oligomeric states of ICs and can be bench marking for future in vivo studies with ICs.

Endogenous costimulatory molecules on T cells such as 4-1BB (CD137) can be leveraged for cancer immunotherapy. Systemic administration of agonistic anti–4-1BB antibodies, although effective preclinically, has not advanced to phase 3 trials because they have been hampered by both dependency on Fcγ receptor–mediated hyperclustering and hepatotoxicity. To overcome these issues, we engineered proteins simultaneously targeting 4-1BB and a tumor stroma or tumor antigen: FAP–4-1BBL (RG7826) and CD19–4-1BBL. In the presence of a T cell receptor signal, they provide potent T cell costimulation strictly dependent on tumor antigen–mediated hyperclustering without systemic activation by FcγR binding. We could show targeting of FAP–4-1BBL to FAP-expressing tumor stroma and lymph nodes in a colorectal cancer–bearing rhesus monkey. Combination of FAP–4-1BBL with tumor antigen–targeted T cell bispecific (TCB) molecules in human tumor samples led to increased IFN-γ and granzyme B secretion. Further, combination of FAP– or CD19–4-1BBL with CEA-TCB (RG7802) or CD20-TCB (RG6026), respectively, resulted in tumor remission in mouse models, accompanied by intratumoral accumulation of activated effector CD8(+) T cells. FAP– and CD19–4-1BBL thus represent an off-the-shelf combination immunotherapy without requiring genetic modification of effector cells for the treatment of solid and hematological malignancies.

CD20 is a B-lymphocyte specific integral membrane protein, an activated-glycosylated phosphoprotein expressed on the surface of B-cells and a clinically validated target of monoclonal antibodies such as rituximab, ocrelizumab, ofatumumab and obinutuzumab in the treatment of all B cell lymphomas and leukemias as well as autoimmune diseases. Here, we report the extraction and purification of native CD20 from SUDHL4 and RAMOS cell lines. To improve the protein yield, we applied a calixarene-based detergent approach to solubilize, stabilize and purify native CD20 from HEK293 cells. Size Exclusion Chromatography (SEC) and Analytical Ultracentrifugation show that purified CD20 was non-aggregated and that CD20 oligomerization is concentration dependent. Negative stain electron microscopy and atomic force microscopy revealed homogenous populations of CD20. However, no defined structure could be observed. Interestingly, micellar solubilized and purified CD20 particles adopt uniformly confined nanodroplets which do not fuse and aggregate. Finally, purified CD20 could bind to rituximab and obinutuzumab as demonstrated by SEC, and Surface Plasmon Resonance (SPR). Specificity of binding was confirmed using CD20 antibody mutants to human B-cell lymphoma cells. The strategy described in this work will help investigate CD20 binding with newly developed antibodies and eventually help to optimize them. This approach may also be applicable to other challenging membrane proteins.

International audience; Intracellular inclusions rich in alpha-synuclein are a hallmark of several neuropathological diseases including Parkinson's disease (PD). Previously, we reported the structure of alpha-synuclein fibrils (residues 1-121), composed of two protofibrils that are connected via a densely-packed interface formed by residues 50-57 (Guerrero-Ferreira, eLife 218;7:e36402). We here report two new polymorphic atomic structures of alpha-synuclein fibrils termed polymorphs 2a and 2b, at 3.0 $\mathring{A}$ and 3.4 $\mathring{A}$ resolution, respectively. These polymorphs show a radically different structure compared to previously reported polymorphs. The new structures have a 10 nm fibril diameter and are composed of two protofilaments which interact via intermolecular salt-bridges between amino acids K45, E57 (polymorph 2a) or E46 (polymorph 2b). The non-amyloid component (NAC) region of alpha-synuclein is fully buried by previously non-described interactions with the N-terminus. A hydrophobic cleft, the location of familial PD mutation sites, and the nature of the protofilament interface now invite to formulate hypotheses about fibril formation, growth and stability.

A novel bispecific antibody format was applied to generate T cell-engaging antibodies. The TriFab format is a trivalent IgG-shaped entity composed of two Fab arms that bind to antigens on the surface of tumor cells, which are linked via flexible peptides to a CD3 binding moiety that replaces the CH2 domains of conventional IgGs. The distinctive feature of these T cell recruiting bispecifics is that their CD3 variable regions are incorporated between domains, rather than N- or C-terminally fused to an Fc or antibody fragments. T cell recruiting TriFabs resemble in size and shape, are expressed and show biophysical properties similar to regular IgGs. Transmission electron microscopy (TEM) demonstrates high flexibility of the cell surface binding arms as well as target antigen accessibility of the interspersed CD3 binding domain. Functional co-culturing assays of peripheral blood mononuclear cells (PBMCs) and different tumor cell lines (MCF7 and A431) revealed a dose-dependent T cell-mediated cytotoxicity that was induced by the TriFabs targeting either LeY or EGFR cell surface antigens.

The formation of undesired high molecular weight species such as dimers is an important quality attribute for therapeutic monoclonal antibody formulations. Therefore, the thorough understanding of mAb dimerization and the detailed characterization mAb dimers is of great interest for future pharmaceutical development of therapeutic antibodies. In this work, we focused on the analyses of different mAb dimers regarding size, surface properties, chemical identity, overall structure and localization of possible dimerization sites. Dimer fractions of different mAbs were isolated to a satisfactory purity from bulk material and revealed 2 predominant overall structures, namely elongated and compact dimer forms. The elongated dimers displayed one dimerization site involving the tip of the Fab domain. Depending on the stress applied, these elongated dimers are connected either covalently or non-covalently. In contrast, the compact dimers exhibited non-covalent association. Several interaction points were detected for the compact dimers involving the hinge region or the base of the Fab domain. These results indicate that mAb dimer fractions are rather complex and may contain more than one kind of dimer. Nevertheless, the overall appearance of mAb dimers suggests the existence of 2 predominant dimeric structures, elongated and compact, which are commonly present in preparations of therapeutic mAbs.

Bilins in complex with specific proteins play key roles in many forms of life. Biliproteins have also been isolated from insects; however, structural details are rare and possible functions largely unknown. Recently, we identified a high-molecular weight biliprotein from a moth, Cerura vinula, as an arylphorin-type hexameric storage protein linked to a novel farnesyl biliverdin IXα; its unusual structure suggests formation by cleavage of mitochondrial heme A. In the present study of another moth, Spodoptera littoralis, we isolated two different biliproteins. These proteins were identified as a very high-density lipoprotein (VHDL) and as vitellin, respectively, by mass spectrometric sequencing. Both proteins are associated with three different farnesyl biliverdins IXα: the one bilin isolated from C. vinula and two new structurally closely related bilins, supposed to be intermediates of heme A degradation. The different bilin composition of the two biliproteins suggests that the presumed oxidations at the farnesyl side-chain take place mainly during egg development. The egg bilins are supposedly transferred from hemolymph VHDL to vitellin in the female. Both biliproteins show strong induced circular dichroism activity compatible with a predominance of the M-conformation of the bilins. This conformation is opposite to that of the arylphorin-type biliprotein from C. vinula. Electron microscopy of the VHDL-type biliprotein from S. littoralis provided a preliminary view of its structure as a homodimer and confirmed the biochemically determined molecular mass of ∼350 kDa. Further, images of S. littoralis hexamerins revealed a 2 × 3 construction identical to that known from the hexamerin from C. vinula.

Upon illumination the visual receptor rhodopsin (Rho) transitions to the activated form Rho(∗), which binds the heterotrimeric G protein, transducin (Gt) causing GDP to GTP exchange and Gt dissociation. Using succinylated concanavalin A (sConA) as a probe, we visualized native Rho dimers solubilized in 1mM n-dodecyl-β-d-maltoside (DDM) and Rho monomers in 5mM DDM. By nucleotide depletion and affinity chromatography together with crosslinking and size exclusion chromatography, we trapped and purified nucleotide-free Rho(∗)·Gt and sConA-Rho(∗)·Gt complexes kept in solution by either DDM or lauryl-maltose-neopentyl-glycol (LMNG). The 3 D envelope calculated from projections of negatively stained Rho(∗)·Gt-LMNG complexes accommodated two Rho molecules, one Gt heterotrimer and a detergent belt. Visualization of triple sConA-Rho(∗)·Gt complexes unequivocally demonstrated a pentameric assembly of the Rho(∗)·Gt complex in which the photoactivated Rho(∗) dimer serves as a platform for binding the Gt heterotrimer. Importantly, individual monomers of the Rho(∗) dimer in the heteropentameric complex exhibited different capabilities for regeneration with either 11-cis or 9-cis-retinal.

Amyloid polymorphism of twisted and straight beta-endorphin fibrils was studied by negative-stain transmission electron microscopy, scanning transmission electron microscopy, and solid-state nuclear magnetic resonance spectroscopy. Whereas fibrils assembled in the presence of salt formed flat, striated ribbons, in the absence of salt they formed mainly twisted filaments. To get insights into their structural differences at the atomic level, 3D solid-state NMR spectra of both fibril types were acquired, allowing the detection of the differences in chemical shifts of C-13 and N-15 atoms in both preparations. The spectral fingerprints and therefore the chemical shifts are very similar for both fibril types. This indicates that the monomer structure and the molecular interfaces are almost the same but that these small differences do propagate to produce flat and twisted morphologies at the mesoscopic scale. This finding is in agreement with both experimental and theoretical considerations on the assembly of polymers (including amyloids) under different salt conditions, which attribute the mesoscopic difference of flat versus twisted fibrils to electrostatic intermolecular repulsions.

SummaryThe type III secretion system machinery, also known as the injectisome, delivers bacterial effector proteins into eukaryotic cells during infection. The outer membrane YscC secretin is a major part of Yersinia enterocolitica’s injectisome and is among the first components to assemble, solely assisted by its pilotin, YscW. We have determined the three-dimensional structures of the native complex and its protease-resistant core to 12 Å resolution by cryo-electron microscopy (cryo-EM) and show that YscC forms a dodecameric complex. Cryo-EM of YscC reconstituted into proteoliposomes defines the secretin’s membrane-spanning region. Native YscC consists of an outer membrane ring connected via a thin cylindrical wall to a conical, periplasmic region that exposes N-terminal petals connected by flexible linkers. These petals harbor the binding site of YscD, a component of the inner membrane ring. A change in their orientation adapts the length of the YscC secretin and facilitates its interaction with YscD.

The process of vision is initiated when the G protein-coupled receptor, rhodopsin (Rho), absorbs a photon and transitions to its activated Rho(∗) form. Rho(∗) binds the heterotrimeric G protein, transducin (G(t)) inducing GDP to GTP exchange and G(t) dissociation. Using nucleotide depletion and affinity chromatography, we trapped and purified the resulting nucleotide-free Rho(∗)·G(t) complex. Quantitative SDS-PAGE suggested a 2:1 molar ratio of Rho(∗) to G(t) in the complex and its mass determined by scanning transmission electron microscopy was 221±12kDa. A 21.6Å structure was calculated from projections of negatively stained Rho(∗)·G(t) complexes. The molecular envelope thus determined accommodated two Rho molecules together with one G(t) heterotrimer, corroborating the heteropentameric structure of the Rho(∗)·G(t) complex.

Nanoparticles show great promise as potent vaccine candidates since they are readily taken up by the antigen presenting cells of the immune system. The particle size and the density of the B cell epitopes on the surface of the particles greatly influences the strength of the humoral immune response. We have developed a novel type of nanoparticle composed of peptide building blocks (Raman et al., 2006) and have used such particles to design vaccines against malaria and SARS (Kaba et al., 2009; Pimentel et al., 2009). Here we investigate the biophysical properties and the refolding conditions of a prototype of these self-assembling polypeptide nanoparticles (SAPNs). SAPNs are formed from a peptide containing a pentameric and a trimeric coiled-coil domain. At near physiological conditions the peptide self-assembles into about 27 nm, roughly spherical SAPNs. The average size of the SAPNs increases with the salt concentration. The optimal pH for their formation is between 7.5 and 8.5, while aggregation occurs at lower and higher values. A glycerol concentration of about 5% v/v is required for the formation of SAPNs with regular spherical shapes. These studies will help to optimize the immunological properties of SAPNs.

Although the pili of Gram-positive bacteria are putative virulence factors, little is known about their structure. Here we describe the molecular architecture of pilus-1 of Streptococcus pneumoniae, which is a major cause of morbidity and mortality worldwide. One major (RrgB) and two minor components (RrgA and RrgC) assemble into the pilus. Results from TEM and scanning transmission EM show that the native pili are approximately 6 nm wide, flexible filaments that can be over 1 microm long. They are formed by a single string of RrgB monomers and have a polarity defined by nose-like protrusions. These protrusions correlate to the shape of monomeric RrgB-His, which like RrgA-His and RrgC-His has an elongated, multi-domain structure. RrgA and RrgC are only present at the opposite ends of the pilus shaft, compatible with their putative roles as adhesin and anchor to the cell wall surface, respectively. Our structural analyses provide the first direct experimental evidence that the native S. pneumoniae pilus shaft is composed exclusively of covalently linked monomeric RrgB subunits oriented head-to-tail.

Aiming at the formation of inorganic/organic hybrid gold nanoparticle superstructures, the design and synthesis of acetylene-monofunctionalized multidentate thioether ligands and their ability to stabilize gold nanoparticles are presented. Rather monodisperse gold particles with diameters of about 1 nm are obtained, which are coated by a small number of ligands, each comprising a silyl-protected acetylene. The acetylene is attached at the end of a rigid ethynylene-phenylene unit of variable length, leading to functionalized gold nanoparticles carrying acetylenes at different distances from the nanoparticle surface. These particles are interlinked by diacetylene formation and are investigated by transmission electron microscopy and UV/vis spectroscopy, revealing the formation of nanoparticle aggregates and small superstructures such as dimers or trimers while the nanoparticles themselves retain their integrity. The interparticle distance in small nanoparticle superstructures reflects the ethynylene-phenylene spacer length corroborating the wet chemical interlinking as the origin of these organic/ inorganic hybrid structures.

The abundant blue hemolymph protein of the last instar larvae of the moth Cerura vinula was purified and characterized by protein-analytical, spectroscopic and electron microscopic methods. Amino acid sequences obtained from a large number of cleavage peptides revealed a high level of similarity of the blue protein with arylphorins from a number of other moth species. In particular, there is a high abundance of the aromatic amino acids tyrosine and phenylalanine amounting to about 19% of total amino acids and a low content of methionine (0.8%) in the Cerura protein. The mass of the native protein complex was studied by size-exclusion chromatography, analytical ultracentrifugation, dynamic light scattering and scanning transmission electron microscopy and found to be around 500 kDa. Denaturating gel electrophoresis and mass spectrometry suggested the presence of two proteins with masses of about 85 kDa. The native Cerura protein is, therefore, a hexameric complex of two different subunits of similar size, as is known for arylphorins. The protein was further characterized as a weakly acidic (pI approximately 5.5) glycoprotein containing mannose, glucose and N-acetylglucosamine in an approximate ratio of 10:1:1. The structure proposed for the most abundant oligosaccharide of the Cerura arylphorin was the same as already identified in arylphorins from other moths. The intense blue colour of the Cerura protein is due to non-covalent association with a bilin of novel structure at an estimated protein subunit-to-ligand ratio of 3:1. Transmission electron microscopy of the biliprotein showed single particles of cylindrical shape measuring about 13 nm in diameter and 9 nm in height. A small fraction of particles of the same diameter but half the height was likely a trimeric arylphorin dissociation intermediate. Preliminary three-dimensional reconstruction based on averaged transmission electron microscopy projections of the individual particles revealed a double-trimeric structure for the hexameric Cerura biliprotein complex, suggesting it to be a dimer of trimers.

Proteins belonging to the Omp85 family are involved in the assembly of β-barrel outer membrane proteins or in the translocation of proteins across the outer membrane in bacteria, mitochondria, and chloroplasts. The cell envelope of the thermophilic bacterium Thermus thermophilus HB27 is multilayered, including an outer membrane that is not well characterized. Neither the precise lipid composition nor much about integral membrane proteins is known. The genome of HB27 encodes one Omp85-like protein, Omp85 Tt , representing an ancestral type of this family. We overexpressed Omp85 Tt in T. thermophilus and purified it from the native outer membranes. In the presence of detergent, purified Omp85 Tt existed mainly as a monomer, composed of two stable protease-resistant modules. Circular dichroism spectroscopy indicated predominantly β-sheet secondary structure. Electron microscopy of negatively stained lipid-embedded Omp85 Tt revealed ring-like structures with a central cavity of ∼1.5 nm in diameter. Single-channel conductance recordings indicated that Omp85 Tt forms ion channels with two different conducting states, characterized by conductances of ∼0.4 nS and ∼0.65 nS, respectively.

Heterotrimeric AMP-activated protein kinase (AMPK) is crucial for energy homeostasis of eukaryotic cells and organisms. Here we report on (i) bacterial expression of untagged mammalian AMPK isoform combinations, all containing gamma(1), (ii) an automated four-dimensional purification protocol, and (iii) biophysical characterization of AMPK heterotrimers by small angle x-ray scattering in solution (SAXS), transmission and scanning transmission electron microscopy (TEM, STEM), and mass spectrometry (MS). AMPK in solution at low concentrations (~1 mg/ml) largely consisted of individual heterotrimers in TEM analysis, revealed a precise 1:1:1 stoichiometry of the three subunits in MS, and behaved as an ideal solution in SAXS. At higher AMPK concentrations, SAXS revealed concentration-dependent, reversible dimerization of AMPK heterotrimers and formation of higher oligomers, also confirmed by STEM mass measurements. Single particle reconstruction and averaging by SAXS and TEM, respectively, revealed similar elongated, flat AMPK particles with protrusions and an indentation. In the lower AMPK concentration range, addition of AMP resulted in a significant decrease of the radius of gyration by approximately 5% in SAXS, which indicates a conformational switch in AMPK induced by ligand binding. We propose a structural model involving a ligand-induced relative movement of the kinase domain resulting in a more compact heterotrimer and a conformational change in the kinase domain that protects AMPK from dephosphorylation of Thr(172), thus positively affecting AMPK activity.

Two distinct dimers are formed during the initial steps of actin polymerization. The first one, referred to as the ‘lower dimer’ (LD) was discovered many years ago by means of chemical crosslinking. Owing to its transient nature, a biological relevance had long been precluded when, using LD-specific antibodies, we detected LD-like contacts in actin assemblies that are associated with the endolysosomal compartment in a number of different cell lines. Moreover, immunofluorescence showed the presence of LD-related structures at the cell periphery of migrating fibroblasts, in the nucleus, and in association with the centrosome of interphase cells. Here, we explore contributions of the LD to the assembly of supramolecular actin structures in real time by total internal reflection fluorescence (TIRF) microscopy. Our data shows that while LD on its own cannot polymerize under filament forming conditions, it is able to incorporate into growing F-actin filaments. This incorporation of LD triggers the formation of X-shaped filament assemblies with barbed ends that are pointing in the same direction in the majority of cases. Similarly, an increased frequency of junction sites was observed when filaments were assembled in the presence of oxidized actin. This data suggests that a disulfide bridge between Cys374 residues might stabilize LD-contacts. Based on our findings, we propose two possible models for the molecular mechanism underlying the supramolecular actin patterning in LD-related structures.

The cholesteryl ester transfer protein (CETP) enables the transfer of cholesteryl ester (CE) from high density lipoproteins (HDL) to low-density lipoproteins (LDL) in the plasma compartment. CETP inhibition raises plasma levels of HDL cholesterol; a ternary tunnel complex with CETP bridging HDL and LDL was suggested as a mechanism. Here, we test whether the inhibition of CETP tunnel complex formation is a promising approach to suppress CE transfer from HDL to LDL, for potential treatment of cardio-vascular disease (CVD). Three monoclonal antibodies against different epitopes of CETP are assayed for their potential to interfere with CE transfer between HDL and/or LDL. Surprisingly, antibodies that target the tips of the elongated CETP molecule, interaction sites sterically required to form the suggested transfer complexes, do not interfere with CETP activity, but an antibody binding to the central region does. We show that CETP interacts with HDL, but not with LDL. Our findings demonstrate that a ternary tunnel complex is not the mechanistic prerequisite to transfer CE among lipoproteins. (C) 2016 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license.

Membrane traffic in eukaryotic cells involves transport of vesicles that bud from a donor compartment and fuse with an acceptor compartment. Common principles of budding and fusion have emerged, and many of the proteins involved in these events are now known. However, a detailed picture of an entire traffickingorganelle is not yet available. Using synaptic vesicles as a model, we have now determined the protein and lipid composition; measured vesicle size, density, and mass; calculated the average protein and lipid mass per vesicle; and determined the copy number of more than a dozen major constituents. A model has been constructed that integrates all quantitative data and includes structural models of abundant proteins. Synaptic vesicles are dominated by proteins, possess a surprising diversity of trafficking proteins, and, with the exception of the V-ATPase that is present in only one to two copies, contain numerous copies of proteins essential for membrane traffic and neurotransmitter uptake. ispartof: Cell vol:127 issue:4 pages:671-673 ispartof: location:United States status: published

In eukaryotes, tripeptidyl peptidase II (TPPII) is a crucial component of the proteolytic cascade acting downstream of the 26S proteasome in the ubiquitin-proteasome pathway. It is an amino peptidase belonging to the subtilase family removing tripeptides from the free N terminus of oligopeptides. The 150-kDa subunits of Drosophila TPPII assemble into a giant proteolytic complex of 6 MDa with a remarkable architecture consisting of two segmented and twisted strands that form a spindle-shaped structure. A refined 3D model has been obtained by cryoelectron microscopy, which reveals details of the molecular architecture and, in conjunction with biochemical data, provides insight into the assembly mechanism. The building blocks of this complex are apparently dimers, within which the 150-kDa monomers are oriented head to head. Stacking of these dimers leads to the formation of twisted single strands, two of which comprise the fully assembled spindle. This spindle also forms when TPPII is heterologously expressed in Escherichia coli , demonstrating that no scaffolding protein is required for complex formation and length determination. Reciprocal interactions of the N-terminal part of subunits from neighboring strands are probably involved in the formation of the native quaternary structure, lending the TPPII spindle a stability higher than that of single strands.

Summary The pseudopilin PulG is one of several essential com- ponents of the type II pullulanase secretion machin- ery (the Pul secreton) of the Gram-negative bacterium Klebsiella oxytoca . The sequence of the N-terminal 25 amino acids of the PulG precursor is hydrophobic and very similar to the corresponding region of type IV pilins. The structure of a truncated PulG (lacking the homologous region), as determined by X-ray crystallography, was found to include part of the long N-terminal a -helix and the four internal anti-parallel b - strands that characterize type IV pilins, but PulG lacks the highly variable loop region with a disulphide bond that is found in the latter. When overproduced, PulG forms flexible pili whose structural features, as visu- alized by electron microscopy, are similar to those of bacterial type IV pili. The average helical repeat com- prises 17 PulG subunits and four helical turns. Elec- tron microscopy and molecular modelling show that PulG probably assembles into left-handed helical pili with the long N-terminal a a a -helix tightly packed in the centre of the pilus. As in the type IV pilins, the hydro- phobic N-terminal part of the PulG a -helix is neces- sary for its assembly. Subtle sequence variations within this highly conserved segment seem to deter- mine whether or not a type IV pilin can be assembled into pili by the Pul secreton.

YscC is the integral outer membrane component of the type III protein secretion machinery of Yersinia enterocolitica and belongs to the family of secretins. This group of proteins forms stable ring-like oligomers in the outer membrane, which are thought to function as transport channels for macromolecules. The YscC oligomer was purified after solubilization from the membrane with a nonionic detergent. Sodium dodecyl sulfate did not dissociate the oligomer, but it caused a change in electrophoretic mobility and an increase in protease susceptibility, indicating partial denaturation of the subunits within the oligomer. The mass of the homo-oligomer, as determined by scanning transmission electron microscopy, was approximately 1 MDa. Analysis of the angular power spectrum from averaged top views of negatively stained YscC oligomers revealed a 13-fold angular order, suggesting that the oligomer consists of 13 subunits. Reconstituted in planar lipid bilayers, the YscC oligomer displayed a constant voltage-independent conductance of approximately 3 nS, thus forming a stable pore. However, in vivo, the expression of YscC did not lead to an increased permeability of the outer membrane. Electron microscopy revealed that the YscC oligomer is composed of three domains, two stacked rings attached to a conical domain. This structure is consistent with the notion that the secretin forms the upper part of the basal body of the needle structure of the type III secreton.

A C 4 -symmetric tetrameric aldolase was used to produce a quadratic network consisting of the enzyme as a rigid four-way connector and stiff streptavidin rods as spacers. Each aldolase subunit was furnished with a His 6 tag for oriented binding to a planar surface and two tethered biotins for binding streptavidin in an oriented manner. The networks were improved by starting with composite units and also by binding to nickel–nitrilotriacetic acid–lipid monolayers. The mesh was adjustable in 5-nanometer increments. The production of a net with switchable mesh was initiated with the use of a calcium ion–containing β-helix spacer that denatured on calcium ion depletion.

Self-assembly refers to the spontaneous organization of individual building blocks into higher order structures. It occurs in biological systems such as spherical viruses, which utilize icosahedral symmetry as a guiding principle for the assembly of coat proteins into a capsid shell. In this study, we characterize the self-assembling protein nanoparticle (SAPN) system, which was inspired by such viruses. To facilitate self-assembly, monomeric building blocks have been designed to contain two oligomerization domains. An N-terminal pentameric coiled-coil domain is linked to a C-terminal coiled-coil trimer by two glycine residues. By combining monomers with inherent propensity to form five- and threefold symmetries in higher order agglomerates, the supposition is that nanoparticles will form that exhibit local and global symmetry axes of order 3 and 5. This article explores the principles that govern the assembly of such a system. Specifically, we show that the system predominantly forms according to a spherical core-shell morphology using a combination of scanning transmission electron microscopy and small angle neutron scattering. We introduce a mathematical toolkit to provide a specific description of the possible SAPN morphologies, and we apply it to characterize all particles with maximal symmetry. In particular, we present schematics that define the relative positions of all individual chains in the symmetric SAPN particles, and provide a guide of how this approach can be generalized to nonspherical morphologies, hence providing unprecedented insights into their geometries that can be exploited in future applications.

Successful vaccine development remains a huge challenge for infectious diseases such as malaria, HIV and influenza. As a novel way to present antigenic epitopes to the immune system, we have developed icosahedral self-assembling protein nanoparticles (SAPNs) to serve as a prototypical vaccine platform for infectious diseases. Here we examine some biophysical factors that affect the self-assembly of these nanoparticles, which have as basic building blocks coiled-coil oligomerization domains joined by a short linker region. Relying on in silico computer modeling predictions, we selected five different linker regions from the RCSB protein database that connect oligomerization domains, and then further studied the self-assembly and stability of in vitro produced nanoparticles through biophysical characterization of formed particles. One design in particular, T2i88, revealed excellent self-assembly and homogeneity thus paving the way toward a more optimized nanoparticle for vaccine applications. From the Clinical Editor Despite the widespread use of vaccines worldwide, successful development of vaccines against some diseases remains a challenge still. In this article, the authors investigated the physic-chemical and biological properties of icosahedral self-assembling protein nanoparticles (SAPNs), which mimic viral particles, in order to utilize this technology as potential platform for future design of vaccines.

Aquaporins are transmembrane water channel proteins, which play important functions in the osmoregulation and water balance of microorganisms, plants, and animal tissues. All aquaporins studied to date are thought to be tetrameric assemblies of four subunits each containing its own aqueous pore. Moreover, the subunits contain an internal sequence repeat forming two obversely symmetric hemichannels predicted to resemble an hour-glass. This unique arrangement of two highly related protein domains oriented at 180 degrees to each other poses a significant challenge in the determination of sidedness. Aquaporin Z (AqpZ) from Escherichia coli was reconstituted into highly ordered two-dimensional crystals. They were freeze-dried and metal-shadowed to establish the relationship between surface structure and underlying protein density by electron microscopy. The shadowing of some surfaces was prevented by protruding aggregates. Thus, images collected from freeze-dried crystals that exhibited both metal-coated and uncoated regions allowed surface relief reconstructions and projection maps to be obtained from the same crystal. Cross-correlation peak searches along lattices crossing metal-coated and uncoated regions allowed an unambiguous alignment of the surface reliefs to the underlying density maps. AqpZ topographs previously determined by AFM could then be aligned with projection maps of AqpZ, and finally with human erythrocyte aquaporin-1 (AQP1). Thereby features of the AqpZ topography could be interpreted by direct comparison to the 6 Angstrom three-dimensional structure of AQP1. We conclude that the sidedness we originally proposed for aquaporin density maps was inverted. (C) 2000 Academic Press.

Aquaporins form a large family of membrane channels involved in osmoregulation. Electron crystallography has shown monomers to consist of six membrane spanning alpha-helices confirming sequence based predictions. Surface exposed loops are the least conserved regions, allowing differentiation of aquaporins. Atomic force microscopy was used to image the surface of aquaporin Z, the water channel of Escherichia coli. Recombinant protein with an N-terminal fragment including 10 histidines was isolated as a tetramer by Ni-affinity chromatography, and reconstituted into two-dimensional crystals with p42(1)2 symmetry. Small crystalline areas with p4 symmetry were found as well. Imaging both crystal types before and after cleavage of the N-termini allowed the cytoplasmic surface to be identified; a drastic change of the cytoplasmic surface accompanied proteolytic cleavage, while the extracellular surface morphology did not change. Flexibility mapping and volume calculations identified the longest loop at the extracellular surface. This loop exhibited a reversible force-induced conformational change.

A chimeric protein consisting of lactose permease with cytochrome b562 in the middle cytoplasmic loop and six His residues at the C terminus (LacY/L6cytb562/417H6 or "red permease") was overexpressed in Escherichia coli and isolated by nickel affinity chromatography after solubilization with dodecyl-beta,d-maltopyranoside. Red permease was then reconstituted in the presence of phospholipids, yielding densely packed vesicles and well-ordered two-dimensional (2D) crystals as shown by electron microscopy of negatively stained specimens. Single-particle analysis of 16 383 protein particles in densely packed vesicles reveals a 5.4-nm-long trapeziform protein of 4.1 to 5.1 nm width, with a central stain-filled indentation. Depending on reconstitution conditions, trigonal and rectangular crystallographic packing arrangements of these elongated particles assembled into trimers are observed. The best ordered 2D crystals exhibit a rectangular unit cell, of dimensions a = 9.9 nm, b = 17.4 nm, that houses two trimeric complexes. Projection maps calculated to a resolution of 2 nm show that these crystals consist of two layers.

The introduction of direct electron detectors (DED) to cryo-electron microscopy has tremendously increased the signal-to-noise ratio (SNR) and quality of the recorded images. We discuss the optimal use of DEDs for cryo-electron crystallography, introduce a new automatic image processing pipeline, and demonstrate the vast improvement in the resolution achieved by the use of both together, especially for highly tilted samples. The new processing pipeline (now included in the software package 2dx) exploits the high SNR and frame readout frequency of DEDs to automatically correct for beam-induced sample movement, and reliably processes individual crystal images without human interaction as data are being acquired. A new graphical user interface (GUI) condenses all information required for quality assessment in one window, allowing the imaging conditions to be verified and adjusted during the data collection session. With this new pipeline an automatically generated unit cell projection map of each recorded 2D crystal is available less than 5 min after the image was recorded. The entire processing procedure yielded a three-dimensional reconstruction of the 2D-crystallized ion-channel membrane protein Ml0K1 with a much-improved resolution of 5 angstrom in-plane and 7 angstrom in the z-direction, within 2 days of data acquisition and simultaneous processing. The results obtained are superior to those delivered by conventional photographic film-based methodology of the same sample, and demonstrate the importance of drift-correction. (c) 2014 The Authors. Published by Elsevier Inc.

Electron crystallography is used to study membrane proteins in the form of planar, two-dimensional (2D) crystals, or other crystalline arrays such as tubular crystals. This method has been used to determine the atomic resolution structures of bacteriorhodopsin, tubulin, aquaporins, and several other membrane proteins. In addition, a large number of membrane protein structures were studied at a slightly lower resolution, whereby at least secondary structure motifs could be identified.In order to conserve the structural details of delicate crystalline arrays, cryo-electron microscopy (cryo-EM) allows imaging and/or electron diffraction of membrane proteins in their close-to-native state within a lipid bilayer membrane.To achieve ultimate high-resolution structural information of 2D crystals, meticulous sample preparation for electron crystallography is of outmost importance. Beam-induced specimen drift and lack of specimen flatness can severely affect the attainable resolution of images for tilted samples. Sample preparations that sandwich the 2D crystals between symmetrical carbon films reduce the beam-induced specimen drift, and the flatness of the preparations can be optimized by the choice of the grid material and the preparation protocol.Data collection in the cryo-electron microscope using either the imaging or the electron diffraction mode has to be performed applying low-dose procedures. Spot-scanning further reduces the effects of beam-induced drift. Data collection using automated acquisition schemes, along with improved and user-friendlier data processing software, is increasingly being used and is likely to bring the technique to a wider user base.

The development of functional supramolecular devices built by self-assembly of elementary molecules and with bioactive properties arouses considerable interest in the field of nanotechnology and new materials. We report here the formation of a new class of lipid tubules exhibiting both properties of molecular recognition and crystal formation for the protein streptavidin. These lipid tubules, made of biotin-containing dioctadecylamine molecules, are straight hollow cylinders with a constant diameter of 27 nm and variable length up to several micrometers. They are unilamellar with an inner diameter of about 16 nm, as shown by cryoelectron microscopy. Streptavidin binds to the biotinylated tubules and assembles spontaneously into ordered helical arrays at the tube surface. These crystals exhibit regular order up to about 1.5 nm resolution, In addition, the helical streptavidin arrays act as functionalized supramolecular devices that bind a wide variety of biotinylated objects, as demonstrated here with proteins and liposomes.