148 results on '"Philips, Kathleen"'
Search Results
2. Introduction
3. Conditioning ΣΔ ADCs for Bluetooth
4. Digitization of the inter-die interface
5. Highly analog and highly digital channels for FM/AM radio
6. Power consumption in channel building blocks
7. Conditioning ΣΔ ADCs
8. Full-analog and full-digital conditioning channels
9. ΣΔ A/D conversion
10. The signal conditioning channel
11. Time-Interleaved SAR and Slope Converters
12. General conclusions
13. SE3: Favorite Circuit Design and Testing Mistakes of Starting Engineers
14. Time-Interleaved SAR and Slope Converters
15. A low-power highly digitized receiver for 2.4-GHz-band GFSK applications
16. A high-accuracy concurrent phase-based ranging for large-scale dense BLE network
17. A Low-Power Fast Start-Up Crystal Oscillator With an Autonomous Dynamically Adjusted Load
18. A Hybrid Design Automation Tool for SAR ADCs in IoT
19. A CMOS Polar Single-Supply Class-G SCPA for LTE NB-IoT and Cat-M1
20. A 95µW 24MHz digitally controlled crystal oscillator for IoT applications with 36nJ start-up energy and >13× start-up time reduction using a fully-autonomous dynamically-adjusted load
21. A 0.62nJ/b multi-standard WiFi/BLE wideband digital polar TX with dynamic FM correction and AM alias suppression for IoT applications
22. A 1.33 mW, 1.6psrms-Integrated-Jitter, 1.8-2.7 GHz Ring-Oscillator-Based Fractional-N Injection-Locked DPLL for Internet-of-Things Applications
23. A circuit-design-driven tool with a hybrid automation approach for SAR ADCs in IoT
24. A 0.7-V 0.43-pJ/cycle Wakeup Timer Based on a Bang-Bang Digital-Intensive Frequency-Locked-Loop for IoT Applications
25. A 0.8V 0.8mm2 bluetooth 5/BLE digital-intensive transceiver with a 2.3mW phase-tracking RX utilizing a hybrid loop filter for interference resilience in 40nm CMOS
26. An Energy-Efficient Antenna Impedance Detection Using Electrical Balance for Single-Step On-Chip Tunable Matching in Wearable/Implantable Applications
27. A 8mW-RX/113mW-TX, Sub-GHz SoC with time-dithered PA ramping for LPWAN applications
28. A 1.3nJ/b IEEE 802.11ah fully digital polar transmitter for IoE applications
29. An RF-Powered DLL-Based 2.4-GHz Transmitter for Autonomous Wireless Sensor Nodes
30. A 2.4GHz BLE-compliant fully-integrated wakeup receiver for latency-critical IoT applications using a 2-dimensional wakeup pattern in 90nm CMOS
31. A 4mW-RX 7mW-TX IEEE 802.11ah fully-integrated RF transceiver
32. An Ultra-Low Power 1.7-2.7 GHz Fractional-N Sub-Sampling Digital Frequency Synthesizer and Modulator for IoT Applications in 40 nm CMOS
33. 5.3 A 95µW 24MHz digitally controlled crystal oscillator for IoT applications with 36nJ start-up energy and >13× start-up time reduction using a fully-autonomous dynamically-adjusted load
34. 24.1 A 770pJ/b 0.85V 0.3mm2 DCO-based phase-tracking RX featuring direct demodulation and data-aided carrier tracking for IoT applications
35. 17.4 A sub-mW antenna-impedance detection using electrical balance for single-step on-chip tunable matching in wearable/implantable applications
36. 24.7 A 673µW 1.8-to-2.5GHz dividerless fractional-N digital PLL with an inherent frequency-capture capability and a phase-dithering spur mitigation for IoT applications
37. A 46 $\mu \text{W}$ 13 b 6.4 MS/s SAR ADC With Background Mismatch and Offset Calibration
38. The Design Challenges of IoT: From System Technologies to Ultra-Low Power Circuits
39. A 1.3 nJ/b IEEE 802.11ah Fully-Digital Polar Transmitter for IoT Applications
40. A 0.9–1.2V supplied, 2.4GHz Bluetooth Low Energy 4.0/4.2 and 802.15.4 transceiver SoC optimized for battery life
41. A 3.7mW-RX 4.4mW-TX fully integrated Bluetooth Low-Energy/IEEE802.15.4/proprietary SoC with an ADPLL-based fast frequency offset compensation in 40nm CMOS
42. An 860µW 2.1-to-2.7GHz all-digital PLL-based frequency modulator with a DTC-assisted snapshot TDC for WPAN (Bluetooth Smart and ZigBee) applications
43. 26.3 A 1.3nJ/b IEEE 802.11ah fully digital polar transmitter for IoE applications
44. Design and built-in characterization of digital-to-time converters for ultra-low power ADPLLs
45. An ultra-low-power wireless transceiver SoC for medical applications
46. Codesign of Electrically Short Antenna–Electronics Interfaces in the Receiving Mode
47. A 3.5mW 315/400MHz IEEE802.15.6/proprietary mode digitally-tunable radio SoC with integrated digital baseband and MAC processor in 40nm CMOS
48. A 0.33 nJ/bit IEEE802.15.6/Proprietary MICS/ISM Wireless Transceiver With Scalable Data Rate for Medical Implantable Applications
49. A 2.4 GHz Power Amplifier With 40% Global Efficiency at ${-}$ 5 dBm Output for Autonomous Wireless Sensor Nodes
50. 13.2 A 3.7mW-RX 4.4mW-TX fully integrated Bluetooth Low-Energy/IEEE802.15.4/proprietary SoC with an ADPLL-based fast frequency offset compensation in 40nm CMOS
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.