Search

Future cosmic microwave background (CMB) experiments are primarily targeting a detection of the primordial $B$-mode polarisation. The faintness of this signal requires exquisite control of systematic effects which may bias the measurements. In this work, we derive requirements on the relative calibration accuracy of the overall polarisation gain ($\Delta g_\nu$) for LiteBIRD experiment, through the application of the blind Needlet Internal Linear Combination (NILC) foreground-cleaning method. We find that minimum variance techniques, as NILC, are less affected by gain calibration uncertainties than a parametric approach, which requires a proper modelling of these instrumental effects. The tightest constraints are obtained for frequency channels where the CMB signal is relatively brighter (166 GHz channel, $\Delta {g}_\nu \approx 0.16 \%$), while, with a parametric approach, the strictest requirements were on foreground-dominated channels. We then propagate gain calibration uncertainties, corresponding to the derived requirements, into all frequency channels simultaneously. We find that the overall impact on the estimated $r$ is lower than the required budget for LiteBIRD by almost a factor $5$. The adopted procedure to derive requirements assumes a simple Galactic model. We therefore assess the robustness of obtained results against more realistic scenarios by injecting the gain calibration uncertainties, according to the requirements, into LiteBIRD simulated maps and assuming intermediate- and high-complexity sky models. In this case, we employ the so-called Multi-Clustering NILC (MC-NILC) foreground-cleaning pipeline and obtain that the impact of gain calibration uncertainties on $r$ is lower than the LiteBIRD gain systematics budget for the intermediate-complexity sky model. For the high-complexity case, instead, it would be necessary to tighten the requirements by a factor $1.8$., Comment: 29 pages, 11 figures

Recently, it has been proposed a new method [arXiv:2405.21029] to detect quantum gravity effects, based on generating gravitational entanglement between two nano-diamonds with Nitrogen-Vacancy defects, in a magnetically trapped configuration. Here we analyse in detail the proposed experimental setup, with a particular focus on implementing the detection of the gravitationally-induced entanglement using an optical readout based on measuring the position of the nano-diamonds and its complementary basis. We also summarise some of the key theoretical and experimental ideas on which this proposed scheme is based., Comment: 8 pages, 2 figures

In the current era of noisy intermediate-scale quantum computers, variational quantum algorithms represent one of the most viable approaches for their application to solve tasks of interest. These algorithms train a parameterized quantum circuit to execute a specific task encoded in a cost function that needs to be minimized using a classical optimizer. In this context, photonic platforms based on reconfigurable integrated optics appear as one of the prominent platforms for the implementation of variational algorithms. In the circuital model of quantum computation based on qubits, to train variational circuits, the parameter shift rule came into being, which allows for the exact calculation of the derivatives of many functions at the output of a quantum circuit, opening up the possibility of using classical optimisation algorithms based on gradient descent. In this paper, we derive a formulation of the parameter shift rule for reconfigurable optical linear circuits based on the Boson Sampling paradigm. This allows us to naturally embed the common types of experimental noise, such as partial distinguishability, and mixedness of the states, thus obtaining a resilient approach. We also present similar rules for the computations of integrals over the variational parameters. Finally, we employ the developed approach to experimentally test variational algorithms with single-photon states processed in a reconfigurable 6-mode universal integrated interferometer. Specifically, we apply the photonic parameter shift rules to the variational implementation, on a photonic platform, of both an eigensolver and a Universal-Not gate., Comment: 10 pages, 4 figures

Generation and manipulation of randomness is a relevant task for several applications of information technology. It has been shown that quantum mechanics offers some advantages for this type of task. A promising model for randomness manipulation is provided by the Bernoulli factories, protocols capable of changing the bias of Bernoulli random processes in a controlled way. At first, this framework was proposed and investigated in a fully classical regime. Recent extensions of this model to the quantum case showed the possibility of implementing a wider class of randomness manipulation functions. We propose a Bernoulli factory scheme with quantum states as input and output, using a photonic path-encoding approach. Our scheme is modular, universal, and its functioning is truly oblivious of the input bias, characteristics that were missing in earlier work. We report on experimental implementations using an integrated and fully programmable photonic platform, thus demonstrating the viability of our approach. These results open new paths for randomness manipulation with integrated quantum technologies.

Quantum theory is notoriously counterintuitive, and yet remains entirely self-consistent when applied universally. Here we uncover a new manifestation of its unusual consequences. We demonstrate, theoretically and experimentally (by means of polarization-encoded single-photon qubits), that Heisenberg's uncertainty principle leads to the impossibility of stringing together logical deductions about outcomes of consecutive non-compatible measurements. This phenomenon resembles the geometry of a Penrose triangle, where each corner is locally consistent while the global structure is impossible. Besides this, we show how overlooking this non-trivial logical structure leads to the erroneous possibility of distinguishing non-orthogonal states with a single measurement.

The detection of B-modes in the CMB polarization pattern is a major issue in modern cosmology and must therefore be handled with analytical methods that produce reliable results. We describe a method that uses the frequency dependency of the QUBIC synthesized beam to perform component separation at the map-making stage, to obtain more precise results. We aim to demonstrate the feasibility of component separation during the map-making stage in time domain space. This new technique leads to a more accurate description of the data and reduces the biases in cosmological analysis. The method uses a library for highly parallel computation which facilitates the programming and permits the description of experiments as easily manipulated operators. These operators can be combined to obtain a joint analysis using several experiments leading to maximized precision. The results show that the method works well and permits end-to-end analysis for the CMB experiments, and in particular, for QUBIC. The method includes astrophysical foregrounds, and also systematic effects like gain variation in the detectors. We developed a software pipeline that produces uncertainties on tensor-to-scalar ratio at the level of $\sigma(r) \sim 0.023$ using only QUBIC simulated data., Comment: 15 pages, 13 figures

The search for relics from the inflation era in the form of B-mode polarization of the CMB is a major challenge in cosmology. The main obstacle appears to come from the complexity of Galactic foregrounds that need to be removed. Multi-frequency observations are key to mitigating their contamination and mapping primordial fluctuations. We present "Spectral-Imaging", a method to reconstruct sub-frequency maps of the CMB polarization within the instrument's physical bandwidth, a unique feature of Bolometric Interferometry that could be crucial for foreground mitigation as it provides an increased spectral resolution. Our technique uses the frequency evolution of the shape of the Bolometric Interferometer's synthesized beam to reconstruct frequency information from the time domain data. We reconstruct sub-frequency maps using an inverse problem approach based on detailed modeling of the instrument acquisition. We use external data to regularize the convergence of the estimator and account for bandpass mismatch and varying angular resolution. The reconstructed maps are unbiased and allow exploiting the spectral-imaging capacity of QUBIC. Using end-to-end simulations of the QUBIC instrument, we perform a cross-spectra analysis to extract a forecast on the tensor-to-scalar ratio constraint of $\sigma(r) = 0.0225$ after component separation., Comment: 14 pages, 8 figures

Bell inequalities represent a milestone for contemporary Physics, both for quantum foundations investigation and technological applications (e.g., quantum communication and entanglement certification). Although loophole-free tests have been recently performed, a strong debate is still ongoing on the actual meaning of Bell inequality tests, for example on the possible additional hypotheses (end eventual loopholes) to be included in Bell's theorem, as well as on the implications for certain interpretations of quantum mechanics. A recent work [S. Virz\`i et al., Quantum Sci. Technol. 9, 045027 (2024)] challenges some of the statements appeared in this debate, achieving for the first time an experimental estimation of the entire Bell-CHSH parameter from a single entangled pair thanks to a weak-interaction-based measurement approach. Here we analyse the implications of this result for quantum mechanics foundations investigation, illustrating how it can tackle some of the aforementioned interpretations of Bell inequality tests and, more in general, of quantum mechanics itself.

DarkSide-20k (DS-20k) is a dark matter detection experiment under construction at the Laboratori Nazionali del Gran Sasso (LNGS) in Italy. It utilises ~100 t of low radioactivity argon from an underground source (UAr) in its inner detector, with half serving as target in a dual-phase time projection chamber (TPC). The UAr cryogenics system must maintain stable thermodynamic conditions throughout the experiment's lifetime of >10 years. Continuous removal of impurities and radon from the UAr is essential for maximising signal yield and mitigating background. We are developing an efficient and powerful cryogenics system with a gas purification loop with a target circulation rate of 1000 slpm. Central to its design is a condenser operated with liquid nitrogen which is paired with a gas heat exchanger cascade, delivering a combined cooling power of >8 kW. Here we present the design choices in view of the DS-20k requirements, in particular the condenser's working principle and the cooling control, and we show test results obtained with a dedicated benchmarking platform at CERN and LNGS. We find that the thermal efficiency of the recirculation loop, defined in terms of nitrogen consumption per argon flow rate, is 95 % and the pressure in the test cryostat can be maintained within $\pm$(0.1-0.2) mbar. We further detail a 5-day cool-down procedure of the test cryostat, maintaining a cooling rate typically within -2 K/h, as required for the DS-20k inner detector. Additionally, we assess the circuit's flow resistance, and the heat transfer capabilities of two heat exchanger geometries for argon phase change, used to provide gas for recirculation. We conclude by discussing how our findings influence the finalisation of the system design, including necessary modifications to meet requirements and ongoing testing activities., Comment: 45 pages, 24 figures

Quantum computing has brought a paradigm change in computer science, where non-classical technologies have promised to outperform their classical counterpart. Such an advantage was only demonstrated for tasks without practical applications, still out of reach for the state-of-art quantum technologies. In this context, a promising strategy to find practical use of quantum computers is to exploit hybrid quantum-classical models, where a quantum device estimates a hard-to-compute quantity, while a classical optimizer trains the parameters of the model. In this work, we demonstrate that single photons and linear optical networks are sufficient for implementing Variational Quantum Algorithms, when the problem specification, or ansatz, is tailored to this specific platform. We show this by a proof-of-principle demonstration of a variational approach to tackle an instance of a factorization task, whose solution is encoded in the ground state of a suitable Hamiltonian. This work which combines Variational Quantum Algorithms with hardware efficient ansatzes for linear-optics networks showcases a promising pathway towards practical applications for photonic quantum platforms.

Two-dimensional materials (2DMs) have been widely investigated because of their potential for heterogeneous integration with modern electronics. However, several major challenges remain, such as the deposition of high-quality dielectrics on 2DMs and the tuning of the 2DM doping levels. Here, we report a scalable plasma-enhanced atomic layer deposition (PEALD) process for direct deposition of a nonstoichiometric aluminum oxide (AlOX) dielectric, overcoming the damage issues associated with conventional methods. Furthermore, we control the thickness of the dielectric layer to systematically tune the doping level of 2DMs. The experimental results demonstrate successful deposition without detectable damage, as confirmed by Raman spectroscopy and electrical measurements. Our method enables tuning of the Dirac and threshold voltages of back-gated graphene and MoS${_2}$ field-effect transistors (FETs), respectively, while also increasing the charge carrier mobility in both device types. We further demonstrate the method in top-gated MoS${_2}$ FETs with double-stack dielectric layers (AlOX+Al${_2}$O${_3}$), achieving critical breakdown field strengths of 7 MV/cm and improved mobility compared with the back gate configuration. In summary, we present a PEALD process that offers a scalable and low-damage solution for dielectric deposition on 2DMs, opening new possibilities for precise tuning of device characteristics in heterogeneous electronic circuits., Comment: 28 pages

Large angular scale surveys in the absence of atmosphere are essential for measuring the primordial $B$-mode power spectrum of the Cosmic Microwave Background (CMB). Since this proposed measurement is about three to four orders of magnitude fainter than the temperature anisotropies of the CMB, in-flight calibration of the instruments and active suppression of systematic effects are crucial. We investigate the effect of changing the parameters of the scanning strategy on the in-flight calibration effectiveness, the suppression of the systematic effects themselves, and the ability to distinguish systematic effects by null-tests. Next-generation missions such as LiteBIRD, modulated by a Half-Wave Plate (HWP), will be able to observe polarisation using a single detector, eliminating the need to combine several detectors to measure polarisation, as done in many previous experiments and hence avoiding the consequent systematic effects. While the HWP is expected to suppress many systematic effects, some of them will remain. We use an analytical approach to comprehensively address the mitigation of these systematic effects and identify the characteristics of scanning strategies that are the most effective for implementing a variety of calibration strategies in the multi-dimensional space of common spacecraft scan parameters. We also present Falcons, a fast spacecraft scanning simulator that we developed to investigate this scanning parameter space.

Recently, machine learning had a remarkable impact, from scientific to everyday-life applications. However, complex tasks often imply unfeasible energy and computational power consumption. Quantum computation might lower such requirements, although it is unclear whether enhancements are reachable by current technologies. Here, we demonstrate a kernel method on a photonic integrated processor to perform a binary classification. We show that our protocol outperforms state-of-the-art kernel methods including gaussian and neural tangent kernels, exploiting quantum interference, and brings a smaller improvement also by single photon coherence. Our scheme does not require entangling gates and can modify the system dimension through additional modes and injected photons. This result opens to more efficient algorithms and to formulating tasks where quantum effects improve standard methods.

We assess the capabilities of the LiteBIRD mission to map the hot gas distribution in the Universe through the thermal Sunyaev-Zeldovich (SZ) effect. Our analysis relies on comprehensive simulations incorporating various sources of Galactic and extragalactic foreground emission, while accounting for specific instrumental characteristics of LiteBIRD, such as detector sensitivities, frequency-dependent beam convolution, inhomogeneous sky scanning, and $1/f$ noise. We implement a tailored component-separation pipeline to map the thermal SZ Compton $y$-parameter over 98% of the sky. Despite lower angular resolution for galaxy cluster science, LiteBIRD provides full-sky coverage and, compared to the Planck satellite, enhanced sensitivity, as well as more frequency bands to enable the construction of an all-sky $y$-map, with reduced foreground contamination at large and intermediate angular scales. By combining LiteBIRD and Planck channels in the component-separation pipeline, we obtain an optimal $y$-map that leverages the advantages of both experiments, with the higher angular resolution of the Planck channels enabling the recovery of compact clusters beyond the LiteBIRD beam limitations, and the numerous sensitive LiteBIRD channels further mitigating foregrounds. The added value of LiteBIRD is highlighted through the examination of maps, power spectra, and one-point statistics of the various sky components. After component separation, the $1/f$ noise from LiteBIRD is effectively mitigated below the thermal SZ signal at all multipoles. Cosmological constraints on $S_8=\sigma_8\left(\Omega_{\rm m}/0.3\right)^{0.5}$ obtained from the LiteBIRD-Planck combined $y$-map power spectrum exhibits a 15% reduction in uncertainty compared to constraints from Planck alone. This improvement can be attributed to the increased portion of uncontaminated sky available in the LiteBIRD-Planck combined $y$-map., Comment: 38 pages, 13 figures, abstract shortened. Updated to match version accepted by JCAP

LiteBIRD, a forthcoming satellite mission, aims to measure the polarization of the Cosmic Microwave Background (CMB) across the entire sky. The experiment will employ three telescopes, Transition-Edge Sensor (TES) bolometers and rotating Half-Wave Plates (HWPs) at cryogenic temperatures to ensure high sensitivity and systematic effects mitigation. This study is focused on the Mid- and High-Frequency Telescopes (MHFT), which will use rotating metal mesh HWPs. We investigate how power variations due to HWP differential emissivity and transmittance combine with TES nonlinear responsivity, resulting in an effective instrumental polarization. We present the results of simulations for the current HWP design, modeling the TES deviation from linearity as a second-order response. We quantify the level of acceptable residual nonlinearity assuming the mission requirement on the tensor-to-scalar ratio, $\delta r < 0.001$. Moreover, we provide an accuracy requirement on the measurement of TES responsivity nonlinearity level for MHFT channels. Lastly, we present possible mitigation methods that will be developed in future studies., Comment: Proceedings of SPIE Astronomical Telescopes + Instrumentation 2024

The dual-phase liquid argon time projection chamber is presently one of the leading technologies to search for dark matter particles with masses below 10 GeV/c$^2$. This was demonstrated by the DarkSide-50 experiment with approximately 50 kg of low-radioactivity liquid argon as target material. The next generation experiment DarkSide-20k, currently under construction, will use 1,000 times more argon and is expected to start operation in 2027. Based on the DarkSide-50 experience, here we assess the DarkSide-20k sensitivity to models predicting light dark matter particles, including Weakly Interacting Massive Particles (WIMPs) and sub-GeV/c$^2$ particles interacting with electrons in argon atoms. With one year of data, a sensitivity improvement to dark matter interaction cross-sections by at least one order of magnitude with respect to DarkSide-50 is expected for all these models. A sensitivity to WIMP--nucleon interaction cross-sections below $1\times10^{-42}$ cm$^2$ is achievable for WIMP masses above 800 MeV/c$^2$. With 10 years exposure, the neutrino fog can be reached for WIMP masses around 5 GeV/c$^2$., Comment: submitted to Nature Communications

A seminal task in quantum information theory is to realize a device able to produce copies of a generic input state with the highest possible output fidelity, thus realizing an \textit{optimal} quantum cloning machine. Recently, the concept of variational quantum cloning was introduced: a quantum machine learning algorithm through which, by exploiting a classical feedback loop informed by the output of a quantum processing unit, the system can self-learn the programming required for an optimal quantum cloning strategy. In this work, we experimentally implement a $1 \rightarrow 2$ variational cloning machine of dual-rail encoded photonic qubits, both for phase-covariant and state-dependent cloning. We exploit a fully programmable 6-mode universal integrated device and classical feedback to reach near-optimal cloning performances. Our results demonstrate the potential of programmable integrated photonic platforms for variational self-learning of quantum algorithms., Comment: 9 pages, 4 figures

In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations. COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, by performing differential measurements between the sky and an internal, cryogenic reference blackbody. To reduce the atmospheric contribution, a spinning wedge mirror performs fast sky-dips at varying elevations while fast, low-noise Kinetic Inductance detectors scan the interferogram. Two arrays of antennas couple the radiation to the detectors. Each array consists of nine smooth-walled multi-mode feed-horns, operating in the $120-180$ GHz and $210-300$ GHz range, respectively. The multi-mode propagation helps increase the instrumental sensitivity without employing large focal planes with hundreds of detectors. The two arrays have a step-linear and a linear profile, respectively, and are obtained by superimposing aluminum plates made with CNC milling. The simulated multi-mode beam pattern has a $\sim 20^{\circ} - 26^{\circ}$ FWHM for the low-frequency array and $\sim 16^{\circ}$ FWHM for the high-frequency one. The side lobes are below $-15$ dB. To characterize the antenna response, we measured the beam pattern of the fundamental mode using a Vector Network Analyzer, in far-field conditions inside an anechoic chamber at room temperature. We completed the measurements of the low-frequency array and found a good agreement with the simulations. We also identified a few non-idealities that we attribute to the measuring setup and will further investigate. A comprehensive multi-mode measurement will be feasible at cryogenic temperature once the full receiver is integrated., Comment: To appear in Proceedings of the SPIE Astronomical Telescopes + Instrumentation, 2024

The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs., Comment: Correction of typos in Section 2 and 6. Improved quality of plots with some modifications to clarify the content

LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$\mu$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $\delta r = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5\sigma$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects., Comment: 23 pages, 9 figures, 1 table, SPIE Astronomical Telescopes + Instrumentation 2024

Unifying quantum theory and general relativity is the holy grail of contemporary physics. Nonetheless, the lack of experimental evidence driving this process led to a plethora of mathematical models with a substantial impossibility of discriminating among them or even establishing if gravity really needs to be quantized or if, vice versa, quantum mechanics must be "gravitized" at some scale. Recently, it has been proposed that the observation of the generation of entanglement by gravitational interaction, could represent a breakthrough demonstrating the quantum nature of gravity. A few experimental proposals have been advanced in this sense, but the extreme technological requirements (e.g., the need for free-falling gravitationally-interacting masses in a quantum superposition state) make their implementation still far ahead. Here we present a feasibility study for a table-top nanodiamond-based interferometer eventually enabling easier and less resource-demanding quantum gravity tests. With respect to the aforementioned proposals, by relying on quantum superpositions of steady massive (mesoscopic) objects our interferometer may allow exploiting just small-range electromagnetic fields (much easier to implement and control) and, at the same time, the re-utilization of the massive quantum probes exploited, inevitably lost in free-falling interferometric schemes., Comment: 8 pages, 5 figures

The CYGNO collaboration is developing next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Negative Ion Drift (NID) gas, reduces charge diffusion leading to improved positional resolution. CF4, although not a NID gas, has also been identified as a favourable gas target as it provides a scintillation signal which can be used for a complimentary light/charge readout approach. These gases can operate at low pressures to elongate Nuclear Recoil (NR) tracks and facilitate directional measurements. In principle, He could be added to low pressure SF6/CF4 without significant detriment to the length of 16S, 12C, and 19F recoils. This would improve the target mass, sensitivity to lower WIMP masses, and offer the possibility of atmospheric operation; potentially reducing the cost of a containment vessel. In this article, we present gas gain and energy resolution measurements, taken with a Multi-Mesh Thick Gaseous Electron Multiplier (MMThGEM), in low pressure SF6 and CF4:SF6 mixtures following the addition of He. We find that the CF4:SF6:He mixtures tested were able to produce gas gains on the order of 10^4 up to a total pressure of 100 Torr. These results demonstrate an order of magnitude improvement in charge amplification in NID gas mixtures with a He component., Comment: Corresponding Author: A.G. McLean

A chained hydrologic-hydraulic model is implemented using predicted runoff from a large-scale hydrologic model (namely ISBA-CTRIP) as inputs to local hydrodynamic models (TELEMAC-2D) to issue forecasts of water level and flood extent. The uncertainties in the hydrological forcing and in friction parameters are reduced by an Ensemble Kalman Filter that jointly assimilates in-situ water levels and flood extent maps derived from remote sensing observations. The data assimilation framework is cycled in a real-time forecasting configuration. A cycle consists of a reanalysis and a forecast phase. Over the analysis, observations up to the present are assimilated. An ensemble is then initialized from the last analyzed states and issued forecasts for next 36 hr. Three strategies of forcing data for this forecast are investigated: (i) using CTRIP runoff for reanalysis and forecast, (ii) using observed discharge for analysis, then CTRIP runoff for forecast and (iii) using observed discharge for reanalysis and keep a persistent discharge value for forecast. It was shown that the data assimilation strategy provides a reliable reanalysis in hindcast mode. The combination of observed discharge and CTRIP runoff provides the most accurate results. For all strategies, the quality of the forecast decreases as the lead time increases. When the errors in CTRIP forcing are non-stationary, the forecast capability may be reduced. This work demonstrates that the forcing provided by a hydrologic model, while imperfect, can be efficiently used as input to a hydraulic model to issue reanalysis and forecasts, thanks to the assimilation of in-situ and remote sensing observations., Comment: 13 pages, 14 figures. Submitted to the IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing

Experiments aimed at direct searches for WIMP dark matter require highly effective reduction of backgrounds and control of any residual radioactive contamination. In particular, neutrons interacting with atomic nuclei represent an important class of backgrounds due to the expected similarity of a WIMP-nucleon interaction, so that such experiments often feature a dedicated neutron detector surrounding the active target volume. In the context of the development of DarkSide-20k detector at INFN Gran Sasso National Laboratory (LNGS), several R&D projects were conceived and developed for the creation of a new hybrid material rich in both hydrogen and gadolinium nuclei to be employed as an essential element of the neutron detector. Thanks to its very high cross-section for neutron capture, gadolinium is one of the most widely used elements in neutron detectors, while the hydrogen-rich material is instrumental in efficiently moderating the neutrons. In this paper results from one of the R&Ds are presented. In this effort the new hybrid material was obtained as a poly(methyl methacrylate) (PMMA) matrix, loaded with gadolinium oxide in the form of nanoparticles. We describe its realization, including all phases of design, purification, construction, characterization, and determination of mechanical properties of the new material.

OLIMPO is a proposed Antarctic balloon-borne Sunyaev-Zel'dovich effect (SZE) imager to study gas dynamics associated with structure formation along with the properties of the warm-hot intergalactic medium (WHIM) residing in the connective filaments. During a 25 day flight OLIMPO will image a total of 10 z~0.05 galaxy clusters and 8 bridges at 145, 250, 365, and 460 GHz at an angular resolution of 1.0'-3.3'. The maps will be significantly deeper than those planned from CMB-S4 and CCAT-P, and will have excellent fidelity to the large angular scales of our low-z targets, which are difficult to probe from the ground. In combination with X-ray data from eROSITA and XRISM we will transform our current static view of galaxy clusters into a full dynamic picture by measuring the internal intra-cluster medium (ICM) velocity structure with the kinematic SZE, X-ray spectroscopy, and the power spectrum of ICM fluctuations. Radio observations from ASKAP and MeerKAT will be used to better understand the connection between ICM turbulence and shocks with the relativistic plasma. Beyond the cluster boundary, we will combine thermal SZE maps from OLIMPO with X-ray imaging from eROSITA to measure the thermodynamics of the WHIM residing in filaments, providing a better understanding of its properties and its contribution to the total baryon budget., Comment: From the proceedings of the mm Universe 2023

We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; and the non-Gaussianities induced in polarization anisotropies. LiteBIRD represents a sensitive probe for PMFs and by exploiting all the physical effects, it will be able to improve the current limit coming from Planck. In particular, thanks to its accurate $B$-mode polarization measurement, LiteBIRD will improve the constraints on infrared configurations for the gravitational effect, giving $B_{\rm 1\,Mpc}^{n_{\rm B} =-2.9} < 0.8$ nG at 95% C.L., potentially opening the possibility to detect nanogauss fields with high significance. We also observe a significant improvement in the limits when marginalized over the spectral index, $B_{1\,{\rm Mpc}}^{\rm marg}< 2.2$ nG at 95% C.L. From the thermal history effect, which relies mainly on $E$-mode polarization data, we obtain a significant improvement for all PMF configurations, with the marginalized case, $\sqrt{\langle B^2\rangle}^{\rm marg}<0.50$ nG at 95% C.L. Faraday rotation constraints will take advantage of the wide frequency coverage of LiteBIRD and the high sensitivity in $B$ modes, improving the limits by orders of magnitude with respect to current results, $B_{1\,{\rm Mpc}}^{n_{\rm B} =-2.9} < 3.2$ nG at 95% C.L. Finally, non-Gaussianities of the $B$-mode polarization can probe PMFs at the level of 1 nG, again significantly improving the current bounds from Planck. Altogether our forecasts represent a broad collection of complementary probes, providing conservative limits on PMF characteristics that will be achieved with LiteBIRD., Comment: 51 pages, 24 figures, abstract shortened

In spite of astonishing advances and developments in remote sensing technologies, meeting the spatio-temporal requirements for flood hydrodynamic modeling remains a great challenge for Earth Observation. The assimilation of multi-source remote sensing data in 2D hydrodynamic models participates to overcome such a challenge. The recently launched Surface Water and Ocean Topography (SWOT) wide-swath altimetry satellite provides a global coverage of water surface elevation at a high resolution. SWOT provides complementary observation to radar and optical images, increasing the opportunity to observe and monitor flood events. This research work focuses on the assimilation of 2D flood extent maps derived from Sentinel-1 C-SAR imagery data, and water surface elevation from SWOT as well as in-situ water level measurements. An Ensemble Kalman Filter (EnKF) with a joint state-parameter analysis is implemented on top of a 2D hydrodynamic TELEMAC-2D model to account for errors in roughness, input forcing and water depth in floodplain subdomains. The proposed strategy is carried out in an Observing System Simulation Experiment based on the 2021 flood event over the Garonne Marmandaise catchment. This work makes the most of the large volume of heterogeneous data from space for flood prediction in hindcast mode paves the way for nowcasting., Comment: Accepted for publication in IEEE 2024 International Geoscience & Remote Sensing Symposium (IGARSS 2024)

We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $\delta r$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $\sigma \left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $\delta r$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $\delta r$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $\delta r < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD.

We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method., Comment: 21 pages, 7 figures

We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,\mu$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere.

We study the possibility of using the $LiteBIRD$ satellite $B$-mode survey to constrain models of inflation producing specific features in CMB angular power spectra. We explore a particular model example, i.e. spectator axion-SU(2) gauge field inflation. This model can source parity-violating gravitational waves from the amplification of gauge field fluctuations driven by a pseudoscalar "axionlike" field, rolling for a few e-folds during inflation. The sourced gravitational waves can exceed the vacuum contribution at reionization bump scales by about an order of magnitude and can be comparable to the vacuum contribution at recombination bump scales. We argue that a satellite mission with full sky coverage and access to the reionization bump scales is necessary to understand the origin of the primordial gravitational wave signal and distinguish among two production mechanisms: quantum vacuum fluctuations of spacetime and matter sources during inflation. We present the expected constraints on model parameters from $LiteBIRD$ satellite simulations, which complement and expand previous studies in the literature. We find that $LiteBIRD$ will be able to exclude with high significance standard single-field slow-roll models, such as the Starobinsky model, if the true model is the axion-SU(2) model with a feature at CMB scales. We further investigate the possibility of using the parity-violating signature of the model, such as the $TB$ and $EB$ angular power spectra, to disentangle it from the standard single-field slow-roll scenario. We find that most of the discriminating power of $LiteBIRD$ will reside in $BB$ angular power spectra rather than in $TB$ and $EB$ correlations., Comment: 22 pages, 13 figures. Submitted to JCAP

The stability of a dark matter detector on the timescale of a few years is a key requirement due to the large exposure needed to achieve a competitive sensitivity. It is especially crucial to enable the detector to potentially detect any annual event rate modulation, an expected dark matter signature. In this work, we present the performance history of the DarkSide-50 dual-phase argon time projection chamber over its almost three-year low-radioactivity argon run. In particular, we focus on the electroluminescence signal that enables sensitivity to sub-keV energy depositions. The stability of the electroluminescence yield is found to be better than 0.5%. Finally, we show the temporal evolution of the observed event rate around the sub-keV region being consistent to the background prediction., Comment: 13 pages, 5 figures

Quantum superposition of high-dimensional states enables both computational speed-up and security in cryptographic protocols. However, the exponential complexity of tomographic processes makes certification of these properties a challenging task. In this work, we experimentally certify coherence witnesses tailored for quantum systems of increasing dimension, using pairwise overlap measurements enabled by a six-mode universal photonic processor fabricated with a femtosecond laser writing technology. In particular, we show the effectiveness of the proposed coherence and dimension witnesses for qudits of dimensions up to 5. We also demonstrate advantage in a quantum interrogation task, and show it is fueled by quantum contextuality. Our experimental results testify to the efficiency of this novel approach for the certification of quantum properties in programmable integrated photonic platforms, Comment: 9 pages, 5 figures + Supplementary Information

The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of \Delta{\nu}/{\nu} \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects., Comment: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences

Universal photonic processors (UPPs) are fully programmable photonic integrated circuits that are key components in quantum photonics. With this work, we present a novel platform for the realization of low-loss, low-power and high-fidelity UPPs based on femtosecond laser writing (FLW) and compatible with a large wavelength spectrum. In fact, we demonstrate different UPPs, tailored for operation at 785 nm and 1550 nm, providing similar high-level performances. Moreover, we show that standard calibration techniques applied to FLW-UPPs result in Haar random polarization independent photonic transformations implemented with average amplitude fidelity as high as 0.9979 at 785 nm (0.9970 at 1550 nm), with the possibility of increasing the fidelity over 0.9990 thanks to novel optimization algorithms. Besides being the first demonstrations of polarization-transparent UPPs, these devices show the highest level of control and reconfigurability ever reported for a FLW circuit. These qualities will be greatly beneficial to applications in quantum information processing.

Galaxy clusters and surrounding medium, can be studied using X-ray bremsstrahlung emission and Sunyaev Zel'dovich (SZ) effect. Both astrophysical probes, sample the same environment with different parameters dependance. The SZ effect is relatively more sensitive in low density environments and thus is useful to study the filamentary structures of the cosmic web. In addition, observations of the matter distribution require high angular resolution in order to be able to map the matter distribution within and around galaxy clusters. MISTRAL is a camera working at 90GHz which, once coupled to the Sardinia Radio Telescope, can reach $12''$ angular resolution over $4'$ field of view (f.o.v.). The forecasted sensitivity is $NEFD \simeq 10-15mJy \sqrt{s}$ and the mapping speed is $MS= 380'^{2}/mJy^{2}/h$. MISTRAL was recently installed at the focus of the SRT and soon will take its first photons., Comment: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences