Search

Carbonate minerals have been detected in Jezero crater, an ancient lake basin that is the landing site of the Mars 2020 Perseverance rover, and within the regional olivine‐bearing (ROB) unit in the Nili Fossae region surrounding this crater. It has been suggested that some carbonates in the margin fractured unit, a rock unit within Jezero crater, formed in a fluviolacustrine environment, which would be conducive to preservation of biosignatures from paleolake‐inhabiting lifeforms. Here, we show that carbonate‐bearing rocks within and outside of Jezero crater have the same range of visible‐to‐near‐infrared carbonate absorption strengths, carbonate absorption band positions, thermal inertias, and morphologies. Thicknesses of exposed carbonate‐bearing rock cross‐sections in Jezero crater are ∼75–90 m thicker than typical ROB unit cross‐sections in the Nili Fossae region, but have similar thicknesses to ROB unit exposures in Libya Montes. These similarities in carbonate properties within and outside of Jezero crater is consistent with a shared origin for all of the carbonates in the Nili Fossae region. Carbonate absorption minima positions indicate that both Mg‐ and more Fe‐rich carbonates are present in the Nili Fossae region, consistent with the expected products of olivine carbonation. These estimated carbonate chemistries are similar to those in martian meteorites and the Comanche carbonates investigated by the Spirit rover in Columbia Hills. Our results indicate that hydrothermal alteration is the most likely formation mechanism for non‐deltaic carbonates within and outside of Jezero crater., Key Points Carbonates within and outside of Jezero crater have similar spectra, thermal inertias, morphologies, and thicknessesCarbonates within and outside of Jezero crater likely formed via the same processesHydrothermal alteration and evaporation are the most likely processes for carbonate formation within and outside of Jezero crater

The high computational cost of Global Climate Models (GCMs) is a problem that limits their use in many areas. Recently an inverse climate modeling (InvCM) method, which fixes the global mean sea surface temperature (SST) and evolves the CO2 mixing ratio to equilibrate climate, has been implemented in a cloud‐resolving model. In this article, we apply InvCM to ExoCAM GCM aquaplanet simulations, allowing the SST pattern to evolve while maintaining a fixed global‐mean SST. We find that InvCM produces the same climate as normal slab‐ocean simulations but converges an order of magnitude faster. We then use InvCM to calculate the equilibrium CO2 for SSTs ranging from 290 to 340 K at 1 K intervals and reproduce the large increase in climate sensitivity at an SST of about 315 K at much higher temperature resolution. The speedup provided by InvCM could be used to equilibrate GCMs at higher spatial resolution or to perform broader parameter space exploration in order to gain new insight into the climate system. Additionally, InvCM could be used to find unstable and hidden climate states, and to find climate states close to bifurcations such as the runaway greenhouse transition., Key Points We converge a GCM by varying the CO2 while keeping the global‐mean surface temperature fixed (the inverse climate modeling method)Inverse climate modeling converges about 10 times faster than normal slab‐ocean simulationsThe SST gradient response timescale is the bottleneck on the convergence rate of inverse climate modeling

With ab initio molecular dynamics simulations on a Na‐, Ca‐, Fe‐, Mg‐, and Al‐bearing silicate melt of pyrolite composition, we examine the detailed changes in elemental coordination as a function of pressure and temperature. We consider the average coordination as well as the proportion and distribution of coordination environments at pressures and temperatures encompassing the conditions at which molten silicates may exist in present‐day Earth and those of the Early Earth's magma ocean. At ambient pressure and 2,000 K, we find that the average coordination of cations with respect to oxygen is 4.0 for Si‐O, 4.0 for Al‐O, 3.7 for Fe‐O, 4.6 for Mg‐O, 5.9 for Na‐O, and 6.2 for Ca‐O. Although the coordination for iron with respect to oxygen may be underestimated, the coordination number for all other cations are consistent with experiments. By 15 GPa (2,000 K), the average coordination for Si‐O remains at 4.0 but increases to 4.1 for Al‐O, 4.2 for Fe‐O, 4.9 for Mg‐O, 8.0 for Na‐O, and 6.8 for Ca‐O. The coordination environment for Na‐O remains approximately constant up to core‐mantle boundary conditions (135 GPa and 4000 K) but increases to about 6 for Si‐O, 6.5 for Al‐O, 6.5 for Fe‐O, 8 for Mg‐O, and 9.5 for Ca‐O. We discuss our results in the context of the metal‐silicate partitioning behavior of siderophile elements and the viscosity changes of silicate melts at upper mantle conditions. Our results have implications for melt properties, such as viscosity, transport coefficients, thermal conductivities, and electrical conductivities, and will help interpret experimental results on silicate glasses., Key Points The proportion and distribution of cation‐to‐oxygen coordination environments in a pyrolite melt have been determined as a function of depthWe examine the distribution of lifetimes of cation‐oxygen species at select pressure‐temperature conditionsOur results are compared to previous ab initio calculations on mafic silicate melts and to experiments on various silicate phases

The presence of hydrogen, most likely in the form of water ice, is well established in Mercury's permanently shaded polar craters. But lower concentrations that may exist away from the poles have not previously been well constrained. In this work we use data from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) Gamma‐Ray and Neutron Spectrometer to produce the first map of the absolute hydrogen abundance in Mercury's northern hemisphere. We find a mean abundance of 300−150+250 ppm and a latitudinal trend that agrees with earlier results showing enhanced hydrogen contained within Mercury's radar bright craters. Additionally, we observe a middle‐ and low‐latitude variation in hydrogen abundance that is correlated most strongly with temperature 20 cm beneath Mercury's surface., Key Points Gamma‐Ray Spectrometer data reveal Mercury's northern hemisphere's average hydrogen abundance to be 300−150+250 ppmWe produced the first neutron‐derived hydrogen map, which shows an increase at the north pole of 75 ppm over equatorial valuesAt midlatitudes a hydrogen‐surface temperature anticorrelation is seen, with less hydrogen at Mercury's hot poles than at its cold poles

Jezero crater is the landing site for the Mars 2020 Perseverance rover. The Noachian‐aged crater has undergone several periods of fluvial and lacustrine activity and phyllosilicate‐ and carbonate‐bearing rocks were formed and emplaced as a result. It also contains a portion of the regional Nili Fossae olivine‐carbonate unit. In this work, we performed spectral mixture analysis of visible/near‐infrared hyperspectral imagery over Jezero. We modeled carbonate abundances up to ∼35% and identified three distinct units containing different carbonate phases. Our work also shows that the olivine in Jezero is predominantly restricted to aeolian deposits overlying the carbonate rocks. The diversity of carbonate phases in Jezero points to multiple periods of carbonate formation under varying conditions., Key Points Unmixing of near‐infrared spectra in Jezero crater suggests carbonate abundances up to ∼35% per pixelStrong olivine spectral signatures are correlated to sand deposits overlying light‐toned carbonate‐bearing rocksFe‐carbonate is the dominant phase throughout the study area; Mg‐carbonate is present along the Jezero paleolake rim

We present the first investigation and quantification of the photoionization loss process to Mercury's sodium exosphere from spacecraft and ground‐based observations. We analyze plasma and neutral sodium measurements from NASA's MESSENGER spacecraft and the THEMIS telescope. We find that the sodium ion (Na+) content and therefore the significance of photoionization varies with Mercury's orbit around the Sun (i.e., true anomaly angle: TAA). Na+ production is affected by the neutral sodium solar‐radiation acceleration loss process. More Na+ was measured on the inbound leg of Mercury's orbit at 180°–360° TAA because less neutral sodium is lost downtail from radiation acceleration. Calculations using results from observations show that the photoionization loss process removes ∼1024 atoms/s from the sodium exosphere (maxima of 4 × 1024 atoms/s), showing that modeling efforts underestimate this loss process. This is an important result as it shows that photoionization is a significant loss process and larger than loss from radiation acceleration., Key Points Photoionization can be a significant loss process to the sodium exosphere with peak loss estimates of 4 × 1024 atoms/sThe photoionization loss process of Mercury's sodium exosphere varies throughout the planet's orbit around the SunMore sodium is lost due to photoionization on the inbound leg (true anomaly angle of 180°–360°) of Mercury's orbit than the outbound leg

We present a re‐examination of mass spectral data obtained from the Pioneer Venus Large Probe Neutral Mass Spectrometer. Our interpretations of differing trace chemical species are suggestive of redox disequilibria in Venus' middle clouds. Assignments to the data (at 51.3 km) include phosphine, hydrogen sulfide, nitrous acid, nitric acid, carbon monoxide, hydrochloric acid, hydrogen cyanide, ethane, and potentially ammonia, chlorous acid, and several tentative PxOy species. All parent ions were predicated upon assignment of corresponding fragmentation products, isotopologues, and atomic species. The data reveal parent ions at varying oxidation states, implying the presence of reducing power in the clouds, and illuminating the potential for chemistries yet to be discovered. When considering the hypothetical habitability of Venus' clouds, the assignments reveal a potential signature of anaerobic phosphorus metabolism (phosphine), an electron donor for anoxygenic photosynthesis (nitrite), and major constituents of the nitrogen cycle (nitrate, nitrite, ammonia, and N2)., Key Points Mass data from the Pioneer Venus Large Probe Neutral Mass Spectrometer reveals several trace chemical species suggestive of disequilibriaTrace species in the middle clouds include phosphine, hydrogen sulfide, nitrous acid, nitric acid, hydrogen cyanide, and carbon monoxideData reveal chemicals related to anaerobic phosphorus metabolism (phosphine), anoxygenic photosynthesis (nitrite), and the nitrogen cycle

We describe the capabilities, radiometric stability, and calibration of a custom vacuum environment chamber capable of simulating the near‐surface conditions of airless bodies. Here we demonstrate the collection of spectral measurements of a suite of fine particulate asteroid analogs made using the Planetary Analogue Surface Chamber for Asteroid and Lunar Environments (PASCALE) under conditions like those found on Earth and on airless bodies. The sample suite includes anhydrous and hydrated physical mixtures, and chondritic meteorites (CM, CI, CV, CR, and L5) previously characterized under Earth‐ and asteroid‐like conditions. And for the first time, we measure the terrestrial and extra‐terrestrial mineral end members used in the olivine‐ and phyllosilicate‐dominated physical mixtures under the same conditions as the mixtures and meteorites allowing us better understand how minerals combine spectrally when mixed intimately. Our measurements highlight the sensitivity of thermal infrared emissivity spectra to small amounts of low albedo materials and the composition of the sample materials. As the albedo of the sample decreases, we observe smaller differences between Earth‐ and asteroid‐like spectra, which results from a reduced thermal gradient in the upper hundreds of microns in the sample. These spectral measurements can be compared to thermal infrared emissivity spectra of asteroid (101955) Bennu's surface in regions where similarly fine particulate materials may be observed to infer surface compositions., Key Points Thermal infrared spectra of fine particulate minerals, physical mixtures of those minerals, and meteorites were measured under simulated Bennu conditionsComparisons of mineral, physical mixture, and meteorite spectra highlight the spectral behavior when materials are mixed in increasing complexityAs albedo decreases the spectral effects due to thermal gradients due to the vacuum environment of airless bodies are reduced

In the Late Noachian to Early Hesperian period, rivers transported detritus from igneous source terrains to a downstream lake within Gale crater, creating a stratified stack of fluviolacustrine rocks that is currently exposed along the slopes of Mount Sharp. Controversy exists regarding the paleoclimate that supported overland flow of liquid water at Gale crater, in large part because little is known about how chemical and mineralogical paleoclimate indicators from mafic‐rock dominated source‐to‐sink systems are translated into the rock record. Here, we compile data from basaltic terrains with varying climates on Earth in order to provide a reference frame for the conditions that may have prevailed during the formation of the sedimentary strata in Gale crater, particularly focusing on the Sheepbed and Pahrump Hills members. We calculate the chemical index of alteration for weathering profiles and fluvial sediments to better constrain the relationship between climate and chemical weathering in mafic terrains, a method that best estimates the cooler limit of climate conditions averaged over time. We also compare X‐ray diffraction patterns and mineral abundances from fluvial sediments in varying terrestrial climates and martian mudstones to better understand the influence of climate on secondary mineral assemblages in basaltic terrains. We show that the geochemistry and mineralogy of most of the fine‐grained sedimentary rocks in Gale crater display first‐order similarities with sediments generated in climates that resemble those of present‐day Iceland, while other parts of the stratigraphy indicate even colder baseline climate conditions. None of the lithologies examined at Gale crater resemble fluvial sediments or weathering profiles from warm (temperate to tropical) terrestrial climates., Key Points Terrestrial sediments and weathering profiles from basaltic terrains display first‐order similarities with mudstones from Gale crater, MarsThe chemical index of alteration can be used as paleoclimate proxy and places constraints on the ancient climate of Gale crater, MarsThe paleoclimate of Gale crater, Mars, was variable and ranged from Icelandic‐like conditions to colder climates

Planets intermediate in size between the Earth and Neptune, and orbiting closer to their host stars than Mercury does the Sun, are the most common type of planet revealed by exoplanet surveys over the last quarter century. Results from NASA's Kepler mission have revealed a bimodality in the radius distribution of these objects, with a relative underabundance of planets between 1.5 and 2.0 $R_{\oplus}$. This bimodality suggests that sub-Neptunes are mostly rocky planets that were born with primary atmospheres a few percent by mass accreted from the protoplanetary nebula. Planets above the radius gap were able to retain their atmospheres ("gas-rich super-Earths"), while planets below the radius gap lost their atmospheres and are stripped cores ("true super-Earths"). The mechanism that drives atmospheric loss for these planets remains an outstanding question, with photoevaporation and core-powered mass loss being the prime candidates. As with the mass-loss mechanism, there are two contenders for the origins of the solids in sub-Neptune planets: the migration model involves the growth and migration of embryos from beyond the ice line, while the drift model involves inward-drifting pebbles that coagulate to form planets close-in. Atmospheric studies have the potential to break degeneracies in interior structure models and place additional constraints on the origins of these planets. However, most atmospheric characterization efforts have been confounded by aerosols. Observations with upcoming facilities are expected to finally reveal the atmospheric compositions of these worlds, which are arguably the first fundamentally new type of planetary object identified from the study of exoplanets., Comment: Invited review in press in JGR: Planets special edition on exoplanets

Wind‐formed features are abundant in Oxia Planum (Mars), the landing site of the 2022 ExoMars mission, which shows geological evidence for a past wet environment. Studies of aeolian bedforms at the landing site were focused on assessing the risk for rover trafficability, however their potential in recording climatic fluctuations has not been explored. Here we show that the landing site experienced multiple climatic changes in the Amazonian, which are recorded by an intriguing set of ridges that we interpret as Periodic Bedrock Ridges (PBRs). Clues for a PBR origin result from ridge regularity, defect terminations, and the presence of preserved megaripples detaching from the PBRs. PBR orientation differs from superimposed transverse aeolian ridges pointing toward a major change in wind regime. Our results provide constrains on PBR formation mechanisms and offer indications on paleo winds that will be crucial for understanding the landing site geology., Key Points We present the first evidence for a periodic bedrock ridge (PBRs) pattern from the ExoMars 2022 landing siteFormative paleowind directions are extrapolated from PBRs and transverse aeolian ridgesEvidence for an Amazonian change in the wind regime are provided

During 2018 and 2019, the Mars Science Laboratory Curiosity rover investigated the chemistry, morphology, and stratigraphy of Vera Rubin ridge (VRR). Using orbital data from the Compact Reconnaissance Imaging Spectrometer for Mars, scientists attributed the strong 860 nm signal associated with VRR to the presence of red crystalline hematite. However, Mastcam multispectral data and CheMin X‐ray diffraction (XRD) measurements show that the depth of the 860 nm absorption is negatively correlated with the abundance of red crystalline hematite, suggesting that other mineralogical or physical parameters are also controlling the 860 nm absorption. Here, we examine Mastcam and ChemCam passive reflectance spectra from VRR and other locations to link the depth, position, and presence or absence of iron‐related mineralogic absorption features to the XRD‐derived rock mineralogy. Correlating CheMin mineralogy to spectral parameters showed that the ~860 nm absorption has a strong positive correlation with the abundance of ferric phyllosilicates. New laboratory reflectance measurements of powdered mineral mixtures can reproduce trends found in Gale crater. We hypothesize that variations in the 860 nm absorption feature in Mastcam and ChemCam observations of VRR materials are a result of three factors: (1) variations in ferric phyllosilicate abundance due to its ~800–1,000 nm absorption; (2) variations in clinopyroxene abundance because of its band maximum at ~860 nm; and (3) the presence of red crystalline hematite because of its absorption centered at 860 nm. We also show that relatively small changes in Ca‐sulfate abundance is one potential cause of the erosional resistance and geomorphic expression of VRR., Key Points Hematite likely controls the wavelength position of the ~860 nm absorption in Mastcam multispectral observations of drill targetsLab results show that the ~860 nm band depth increases with ferric phyllosilicate abundance due to its ~800–1,000 nm featureThe reflectance maximum near 860 nm in pyroxene affects the ~860 nm band depth in spectra of lab mixtures and drilled rocks on Mars

The earliest atmospheres of rocky planets originate from extensive volatile release during magma ocean epochs that occur during assembly of the planet. These establish the initial distribution of the major volatile elements between different chemical reservoirs that subsequently evolve via geological cycles. Current theoretical techniques are limited in exploring the anticipated range of compositional and thermal scenarios of early planetary evolution, even though these are of prime importance to aid astronomical inferences on the environmental context and geological history of extrasolar planets. Here, we present a coupled numerical framework that links an evolutionary, vertically resolved model of the planetary silicate mantle with a radiative‐convective model of the atmosphere. Using this method, we investigate the early evolution of idealized Earth‐sized rocky planets with end‐member, clear‐sky atmospheres dominated by either H2, H2O, CO2, CH4, CO, O2, or N2. We find central metrics of early planetary evolution, such as energy gradient, sequence of mantle solidification, surface pressure, or vertical stratification of the atmosphere, to be intimately controlled by the dominant volatile and outgassing history of the planet. Thermal sequences fall into three general classes with increasing cooling timescale: CO, N2, and O2 with minimal effect, H2O, CO2, and CH4 with intermediate influence, and H2 with several orders of magnitude increase in solidification time and atmosphere vertical stratification. Our numerical experiments exemplify the capabilities of the presented modeling framework and link the interior and atmospheric evolution of rocky exoplanets with multiwavelength astronomical observations., Key Points Magma oceans with different volatiles display varying timescales of solidification, outgassing, and atmospheric stratificationAtmospheric blanketing and cooling time increase in three principle classes from N2, CO, O2 to H2O, CO2, CH4 to H2 Coupled mantle–atmosphere systems display distinctive features that link the interior and surface state to atmospheric spectrum and climate

Visible/short‐wave infrared spectral data from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) show absorptions attributed to hematite at Vera Rubin ridge (VRR), a topographic feature on northwest Mt. Sharp. The goals of this study are to determine why absorptions caused by ferric iron are strongly visible from orbit at VRR and to improve interpretation of CRISM data throughout lower Mt. Sharp. These goals are achieved by analyzing coordinated CRISM and in situ spectral data along the Curiosity Mars rover's traverse. VRR bedrock within areas that have the deepest ferric absorptions in CRISM data also has the deepest ferric absorptions measured in situ. This suggests strong ferric absorptions are visible from orbit at VRR because of the unique spectral properties of VRR bedrock. Dust and mixing with basaltic sand additionally inhibit the ability to measure ferric absorptions in bedrock stratigraphically below VRR from orbit. There are two implications of these findings: (1) Ferric absorptions in CRISM data initially dismissed as noise could be real, and ferric phases are more widespread in lower Mt. Sharp than previously reported. (2) Patches with the deepest ferric absorptions in CRISM data are, like VRR, reflective of deeper absorptions in the bedrock. One model to explain this spectral variability is late‐stage diagenetic fluids that changed the grain size of ferric phases, deepening absorptions. Curiosity's experience highlights the strengths of using CRISM data for spectral absorptions and associated mineral detections and the caveats in using these data for geologic interpretations and strategic path planning tools., Key Points Areas on Vera Rubin ridge with deep ferric absorptions from orbit also have deep ferric absorptions in Curiosity spectral data setsFerric phases are more widespread on Mt. Sharp than originally reported. Diagenesis deepened ferric absorptions in several locationsCombining orbital and in situ observations enhances planetary exploration

Many boulders on (101955) Bennu, a near‐Earth rubble pile asteroid, show signs of in situ disaggregation and exfoliation, indicating that thermal fatigue plays an important role in its landscape evolution. Observations of particle ejections from its surface also show it to be an active asteroid, though the driving mechanism of these events is yet to be determined. Exfoliation has been shown to mobilize disaggregated particles in terrestrial environments, suggesting that it may be capable of ejecting material from Bennu's surface. We investigate the nature of thermal fatigue on the asteroid, and the efficacy of fatigue‐driven exfoliation as a mechanism for generating asteroid activity, by performing finite element modeling of stress fields induced in boulders from diurnal cycling. We develop a model to predict the spacing of exfoliation fractures and the number and speed of particles that may be ejected during exfoliation events. We find that crack spacing ranges from ~1 mm to 10 cm and disaggregated particles have ejection speeds up to ~2 m/s. Exfoliation events are most likely to occur in the late afternoon. These predictions are consistent with observed ejection events at Bennu and indicate that thermal fatigue is a viable mechanism for driving asteroid activity. Crack propagation rates and ejection speeds are greatest at perihelion when the diurnal temperature variation is largest, suggesting that events should be more energetic and more frequent when closer to the Sun. Annual thermal stresses that arise in large boulders may influence the spacing of exfoliation cracks or frequency of ejection events., Key Points We simulated stress fields in boulders to assess the nature and efficacy of thermal breakdown on Bennu, including by exfoliationOur model predicts that exfoliation is capable of ejecting centimeter‐scale particles from the asteroid at speeds of meters per secondThis mechanism is consistent with observations of particle ejection at Bennu and is a viable explanation for Bennu's activity

This paper provides an overview of the Curiosity rover's exploration at Vera Rubin ridge (VRR) and summarizes the science results. VRR is a distinct geomorphic feature on lower Aeolis Mons (informally known as Mount Sharp) that was identified in orbital data based on its distinct texture, topographic expression, and association with a hematite spectral signature. Curiosity conducted extensive remote sensing observations, acquired data on dozens of contact science targets, and drilled three outcrop samples from the ridge, as well as one outcrop sample immediately below the ridge. Our observations indicate that strata composing VRR were deposited in a predominantly lacustrine setting and are part of the Murray formation. The rocks within the ridge are chemically in family with underlying Murray formation strata. Red hematite is dispersed throughout much of the VRR bedrock, and this is the source of the orbital spectral detection. Gray hematite is also present in isolated, gray‐colored patches concentrated toward the upper elevations of VRR, and these gray patches also contain small, dark Fe‐rich nodules. We propose that VRR formed when diagenetic event(s) preferentially hardened rocks, which were subsequently eroded into a ridge by wind. Diagenesis also led to enhanced crystallization and/or cementation that deepened the ferric‐related spectral absorptions on the ridge, which helped make them readily distinguishable from orbit. Results add to existing evidence of protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record., Key Points We summarize Curiosity's campaign at Vera Rubin ridge (Sols 1726–2302) and the high‐level results from articles in this special issueVera Rubin ridge formed when diagenesis hardened rocks along the base of Aeolis Mons; wind subsequently etched the feature into a ridgeResults add evidence for protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record

Geochemical models of secondary mineral precipitation on Mars generally assume semiopen systems (open to the atmosphere but closed at the water‐sediment interface) and equilibrium conditions. However, in natural multicomponent systems, the reactive surface area of primary minerals controls the dissolution rate and affects the precipitation sequences of secondary phases, and simultaneously, the transport of dissolved species may occur through the atmosphere‐water and water‐sediment interfaces. Here we present a suite of geochemical models designed to analyze the formation of secondary minerals in basaltic sediments on Mars, evaluating the role of (i) reactive surface areas and (ii) the transport of ions through a basalt sediment column. We consider fully open conditions, both to the atmosphere and to the sediment, and a kinetic approach for mineral dissolution and precipitation. Our models consider a geochemical scenario constituted by a basin (i.e., a shallow lake) where supersaturation is generated by evaporation/cooling and the starting point is a solution in equilibrium with basaltic sediments. Our results show that cation removal by diffusion, along with the input of atmospheric volatiles and the influence of the reactive surface area of primary minerals, plays a central role in the evolution of the secondary mineral sequences formed. We conclude that precipitation of evaporites finds more restrictions in basaltic sediments of small grain size than in basaltic sediments of greater grain size., Key Points Fully open (simultaneously to the atmosphere and sediment interfaces) kinetic models to track the formation of clays and evaporites on MarsAnalyses of cation removal by diffusion and by adsorption to clays, input of atmospheric volatiles, and reactive surface area of basaltPrecipitation of evaporites more restricted in basaltic sediments of small size than in basaltic sediments of greater size

Images from the Mars Science Laboratory (MSL) mission of lacustrine sedimentary rocks of Vera Rubin ridge on “Mt. Sharp” in Gale crater, Mars, have shown stark color variations from red to purple to gray. These color differences crosscut stratigraphy and are likely due to diagenetic alteration of the sediments after deposition. However, the chemistry and timing of these fluid interactions is unclear. Determining how diagenetic processes may have modified chemical and mineralogical signatures of ancient Martian environments is critical for understanding the past habitability of Mars and achieving the goals of the MSL mission. Here we use visible/near‐infrared spectra from Mastcam and ChemCam to determine the mineralogical origins of color variations in the ridge. Color variations are consistent with changes in spectral properties related to the crystallinity, grain size, and texture of hematite. Coarse‐grained gray hematite spectrally dominates in the gray patches and is present in the purple areas, while nanophase and fine‐grained red crystalline hematite are present and spectrally dominate in the red and purple areas. We hypothesize that these differences were caused by grain‐size coarsening of hematite by diagenetic fluids, as observed in terrestrial analogs. In this model, early primary reddening by oxidizing fluids near the surface was followed during or after burial by bleaching to form the gray patches, possibly with limited secondary reddening after exhumation. Diagenetic alteration may have diminished the preservation of biosignatures and changed the composition of the sediments, making it more difficult to interpret how conditions evolved in the paleolake over time., Key Points Vera Rubin ridge exhibits strong color differences that crosscut stratigraphy, consistent with postdepositional alteration (diagenesis)Color differences correspond to variations in spectral signatures of nanophase, fine‐grained, and coarse‐grained hematiteBased on terrestrial analogs, these variations can be explained by early oxidation and later coarsening of hematite by diagenetic fluids

Both Earth and the Moon share a common history regarding the epoch of large basin formation, though only the lunar geologic record preserves any appreciable record of this Late Heavy Bombardment. The emergence of Earth's first life is approximately contemporaneous with the Late Heavy Bombardment; understanding the latter informs the environmental conditions of the former, which are likely necessary to constrain the mechanisms of abiogenesis. While the relative formation time of most of the Moon's large basins is known, the absolute timing is not. The timing of Crisium Basin's formation is one of many important events that must be constrained and would require identifying and dating impact melt formed in the Crisium event. To inform a future lunar sample dating mission, we thus characterized possible outcrops of impact melt. We determined that several mare lava‐embayed kipukas could contain impact melt, though the rim and central peaks of the partially lava‐flooded Yerkes Crater likely contain the most pure and intact Crisium impact melt. It is here where future robotic and/or human missions could confidently add a key missing piece to the puzzle of the combined issues of early Earth‐Moon bombardment and the emergence of life., Key Points Relatively pure impact melt from Crisium Basin is exposed in the central peaks of Yerkes CraterDiluted Crisium impact melt may be exposed in some previously identified kipukas in CrisiumRadiogenic dating of impact melt exposed in Yerkes' central peak during a future mission would yield the age of the Crisium impact event

The Mars Science Laboratory Curiosity rover is traversing a sequence of stratified sedimentary rocks in Gale crater that contain varied eolian, fluviodeltaic, and lake deposits, with phyllosilicates, iron oxides, and sulfate salts. Here, we report the chloride salt distribution along the rover traverse. Chlorine is detected at low levels (, Key Points Isolated Cl enrichments in bedrock, in nodular textures, and at calcium sulfate vein margins, correlated with Na, indicate haliteMapping of Cl along the Curiosity traverse in Gale Crater indicates Cl enrichments are more common in select Murray formation membersThe scattered, isolated occurrences of chlorides are consistent with late groundwater reworking and remobilization of original deposits

Moon Mineralogy Mapper spectroscopic data were used to investigate the mineralogy of a selection of impact craters' central peaks or peak rings, in order to characterize the lunar crust‐mantle interface, and assess its lateral and vertical heterogeneity. The depth of origin of the craters' central peaks or peak rings was calculated using empirical equations, and compared to Gravity Recovery and Interior Laboratory crustal thickness models to select craters tapping within +10/−20 km of the crust‐mantle interface. Our results show that plagioclase is widely detected, including in craters allegedly sampling lower crustal to mantle material, except in central peaks where Low‐Calcium Pyroxene was detected. Olivine detections are scarce, and identified in material assumed to be derived from both above and below the crust‐mantle interface. Mineralogical detections in central peaks show that there is an evolution of the pyroxene composition with depth, that may correspond to the transition from the crust to the mantle. The correlation between High‐Calcium Pyroxene and some pyroxene‐dominated mixture spectra with the location of maria and cryptomaria hints at the existence of lateral heterogeneities as deep as the crust‐mantle interface., Key Points Plagioclase is widely detected in the central peaks of craters allegedly sampling the lower crust or mantle, except where LCP is observedLateral heterogeneities at the crust‐mantle interface and a pyroxene compositional evolution with depth (from HCP to LCP) were observedThis study's mineralogical observations support the GRAIL crustal thickness model 1 better than the model 3

Recent measurements by the Imaging Ultraviolet Spectrograph (IUVS) instrument on NASA's Mars Atmosphere and Volatile EvolutioN mission show that a persistent layer of Mg+ ions occurs around 90 km in the Martian atmosphere but that neutral Mg atoms are not detectable. These observations can be satisfactorily modeled with a global meteoric ablation rate of 0.06 t sol−1, out of a cosmic dust input of 2.7 ± 1.6 t sol−1. The absence of detectable Mg at 90 km requires that at least 50% of the ablating Mg atoms ionize through hyperthermal collisions with CO2 molecules. Dissociative recombination of MgO+.(CO2)n cluster ions with electrons to produce MgCO3 directly, rather than MgO, also avoids a buildup of Mg to detectable levels. The meteoric injection rate of Mg, Fe, and other metals—constrained by the IUVS measurements—enables the production rate of metal carbonate molecules (principally MgCO3 and FeCO3) to be determined. These molecules have very large electric dipole moments (11.6 and 9.2 Debye, respectively) and thus form clusters with up to six H2O molecules at temperatures below 150 K. These clusters should then coagulate efficiently, building up metal carbonate‐rich ice particles which can act as nucleating particles for the formation of CO2‐ice clouds. Observable mesospheric clouds are predicted to occur between 65 and 80 km at temperatures below 95 K and above 85 km at temperatures about 5 K colder., Key Points A meteoric input function for Mars is generated by combining a cosmic dust input of ~3 tonnes sol−1 with a chemical ablation modelMAVEN/IUVS observations of Mg+, and a small upper limit for Mg, suggest that around 50% of Mg atoms ionize directly after ablationMgCO3 and FeCO3 form stable H2O clusters which coagulate to metal‐rich ice particles, likely nuclei for clouds in the Martian mesosphere

The Mars Science Laboratory Curiosity rover performed coordinated measurements to examine the textures and compositions of aeolian sands in the active Bagnold dune field. The Bagnold sands are rounded to subrounded, very fine to medium sized (~45–500 μm) with ≥6 distinct grain colors. In contrast to sands examined by Curiosity in a dust‐covered, inactive bedform called Rocknest and soils at other landing sites, Bagnold sands are darker, less red, better sorted, have fewer silt‐sized or smaller grains, and show no evidence for cohesion. Nevertheless, Bagnold mineralogy and Rocknest mineralogy are similar with plagioclase, olivine, and pyroxenes in similar proportions comprising >90% of crystalline phases, along with a substantial amorphous component (35% ± 15%). Yet Bagnold and Rocknest bulk chemistry differ. Bagnold sands are Si enriched relative to other soils at Gale crater, and H2O, S, and Cl are lower relative to all previously measured Martian soils and most Gale crater rocks. Mg, Ni, Fe, and Mn are enriched in the coarse‐sieved fraction of Bagnold sands, corroborated by visible/near‐infrared spectra that suggest enrichment of olivine. Collectively, patterns in major element chemistry and volatile release data indicate two distinctive volatile reservoirs in Martian soils: (1) amorphous components in the sand‐sized fraction (represented by Bagnold) that are Si‐enriched, hydroxylated alteration products and/or H2O‐ or OH‐bearing impact or volcanic glasses and (2) amorphous components in the fine fraction (, Key Points Because of ongoing aeolian activity, the Bagnold dunes consist of well‐sorted sands and lack the finer grains typical of Martian soilsDune sands are chemically distinct with elevated Si, Mg, and Ni and lower H2O, S, and Cl relative to all previously measured Martian finesTwo distinct, water‐/OH‐bearing amorphous components are identified: Fe‐, S‐, and Cl‐rich material in dust and Si‐rich material in the sands

International audience; The presence of melts in the first part of upper mantle is image by many geophysical studies. The nature of these melts is referring by different petrological and experimental studies that show a melt rich in volatiles, principally in CO2. To apprehend the deep carbon cycle, the first necessity is to know the mobility of these melts, like the viscosity. As a function of geodynamical context, the temperature and the pressure change, therefore different carbonated melts are produce. In this study, we investigate different SiO2/CO2/H2O content in melt to determine their influences on the viscosity. To investigate the viscosity, the experiment is making in ESRF in Grenoble. We produce in-situ measurements in Paris Edinburg cell with falling sphere viscometry experiments. Experiments are produce between 1 and 3 GPa and liquid temperature of sample. One result show a viscosity of 0.15 Pa.s for 20wt% of CO2. It is one order of magnitude more viscous than dolomite (Kono et al., 2013) and average 5 times less viscous than basalt (Sakamaki et al., 2013). Primarily results obtain in ESRF show a no linear effect of SiO2/CO2 content. Volatiles have an effect on viscosity and this has implication on melt migration in the mantle, so on the deep carbon cycle.

We have developed a refined geologic map and stratigraphy for lower Mount Sharp using coordinated analyses of new spectral, thermophysical, and morphologic orbital data products. The Mount Sharp group consists of seven relatively planar units delineated by differences in texture, mineralogy, and thermophysical properties. These units are (1–3) three spatially adjacent units in the Murray formation which contain a variety of secondary phases and are distinguishable by thermal inertia and albedo differences, (4) a phyllosilicate‐bearing unit, (5) a hematite‐capped ridge unit, (6) a unit associated with material having a strongly sloped spectral signature at visible near‐infrared wavelengths, and (7) a layered sulfate unit. The Siccar Point group consists of the Stimson formation and two additional units that unconformably overlie the Mount Sharp group. All Siccar Point group units are distinguished by higher thermal inertia values and record a period of substantial deposition and exhumation that followed the deposition and exhumation of the Mount Sharp group. Several spatially extensive silica deposits associated with veins and fractures show that late‐stage silica enrichment within lower Mount Sharp was pervasive. At least two laterally extensive hematitic deposits are present at different stratigraphic intervals, and both are geometrically conformable with lower Mount Sharp strata. The occurrence of hematite at multiple stratigraphic horizons suggests redox interfaces were widespread in space and/or in time, and future measurements by the Mars Science Laboratory Curiosity rover will provide further insights into the depositional settings of these and other mineral phases., Key Points We have developed a stratigraphy for lower Mount Sharp using analyses of new spectral, thermophysical, and morphologic orbital data productsSiccar Point group records a period of deposition and exhumation that followed the deposition and exhumation of the Mount Sharp groupLate state silica enrichment and redox interfaces within lower Mount Sharp were pervasive and widespread in space and/or in time

Recent observations of the Martian surface by the Phoenix lander and the Sample Analysis at Mars indicate the presence of perchlorate (ClO4 –). The abundance and isotopic composition of these perchlorates suggest that the mechanisms responsible for their formation in the Martian environment may be unique in our solar system. With this in mind, we propose a potential mechanism for the production of Martian perchlorate: the radiolysis of the Martian surface by galactic cosmic rays, followed by the sublimation of chlorine oxides into the atmosphere and their subsequent synthesis to form perchloric acid (HClO4) in the atmosphere, and the surface deposition and subsequent mineralization of HClO4 in the regolith to form surface perchlorates. To evaluate the viability of this mechanism, we employ a one‐dimensional chemical model, examining chlorine chemistry in the context of Martian atmospheric chemistry. Considering the chlorine oxide, OClO, we find that an OClO flux as low as 3.2 × 107 molecules cm–2 s–1 sublimated into the atmosphere from the surface could produce sufficient HClO4 to explain the perchlorate concentration on Mars, assuming an accumulation depth of 30 cm and integrated over the Amazonian period. Radiolysis provides an efficient pathway for the oxidation of chlorine, bypassing the efficient Cl/HCl recycling mechanism that characterizes HClO4 formation mechanisms proposed for the Earth but not Mars., Key Points Mechanism initiated by radiolysis in the surface can potentially account for observed Martian perchlorate concentrationsInjection of oxides of chlorine from the surface into the atmosphere is potentially an effective way of forming perchloric acidMartian perchlorate is an important oxidant but poorly characterized

International audience; CRISM is a hyperspectral imager onboard the Mars Reconnaissance Orbiter (MRO; NASA, 2005) which has been acquiring data since November 2006 and has targeted hydrated minerals previously detected by OMEGA (Mars Express; ESA, 2003). The present study focuses on hydrated minerals detected with CRISM at high spatial resolution in the vicinity of Capri Chasma, a canyon of the Valles Marineris system. CRISM data were processed and coupled with MRO and other spacecraft data, in particular HiRiSE (High Resolution Science Experiment, MRO) images. Detections revealed sulfates in abundance in Capri, especially linked to the interior layered deposits (ILD) that lie in the central part of the chasma. Both monohydrated and polyhydrated sulfates are found at different elevations and are associated with different layers. Monohydrated sulfates are widely detected over the massive light-toned cliffs of the ILD, whereas polyhydrated sulfates seem to form a basal and a top layer associated with lower-albedo deposits in flatter areas. Hydrated silicates (phyllosilicates or opaline silica) have also been detected very locally on two mounds about a few hundred meters in diameter at the bottom of the ILD cliffs. We suggest some formation models of these minerals that are consistent with our observations.