Search

This paper presents research on several factors influencing the stabbing behaviour of stratified panels made of aramid fabric Twaron® SRM509 Teijin Aramid BV (Arnhem, The Netherlands). The inputs in the test campaign were the number of layers, the impact energy, and the sample size. Tests were performed on small samples (130 mm × 130 mm) on an Instron® CEAST 9350 drop-tower impact system (Norwood, MA, USA) and on larger samples (400 mm × 400 mm) using a test installation with the same values of the impact energy. Knife type S1 was used, with the geometry recommended in NIJ Standard 0115.00 Stab Resistance of Body Armor SEM, and macro photography investigations revealed the failure mechanisms of panel, layers and fibres. A very important conclusion of this study regarding the stabbing performance of fabric Twaron® SRM 509 in particular, but also in general for panels for body protection is that a research study could start on small size samples, with an accurately instrumented machine, in order to establish the influence of significant factors of stab resistance (energy level, number of layers in a panel, etc.), as these samples are less expensive and less time consuming, but the study should be continued to examine larger size samples. The obtained data are useful for the prototype. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of two cases, simulating the impact of a cylindical projectile on a perfectly rigid plate. One case is run without friction, the second one is run taking into account a friction coeficient between the plate and the projectile. The authors used for the projectile the same material constitutive model for both cases, based on experimental data and model developed by Johnson and Cook. Here, the comparing criteria were the maximum value of von Mises stress, the velocity and acceleration of the central point on the opposite face to the contact face of the projectile. Introducing friction, the simulation is more realistic. Taking into account friction, the projectile is less deformed and there was no edge breakage, at the same time moment. [ABSTRACT FROM AUTHOR]

We engaged in a participatory modeling approach with health sector stakeholders in Jordan to support government decision-making regarding implementing public health measures to mitigate COVID-19 disease burden. We considered the effect of 4 physical distancing strategies on reducing COVID-19 transmission and mortality in Jordan during March 2020–January 2021: no physical distancing; intermittent physical distancing where all but essential services are closed once a week; intermittent physical distancing where all but essential services are closed twice a week; and a permanent physical distancing intervention. Modeling showed that the fourth strategy would be most effective in reducing cases and deaths; however, this approach was only marginally beneficial to reducing COVID-19 disease compared with an intermittently enforced physical distancing intervention. Scenario-based model influenced policy-making and the evolution of the pandemic in Jordan confirmed the forecasting provided by the modeling exercise and helped confirm the effectiveness of the policy adopted by the government of Jordan. [ABSTRACT FROM AUTHOR]