Search

Strengths and weakness of remotely sensed winds are discussed, along with the current capabilities for remotely sensing winds and stress. Future missions are briefly mentioned. The observational needs for a wide range of wind and stress applications are provided. These needs strongly support a short list of desired capabilities of future missions and constellations.

The article presents information on a study that investigates the characteristics 10 of the Advanced Scatterometer (ASCAT) high-rank wind solutions under different conditions. The study aimed at developing a method for rejecting spurious high-rank solutions. It is stated that the implementation of the procedure improves the effectiveness of the ASCAT wind quality control (QC) as well as ambiguity removal procedures.

The quality of the Ku-band scatterometer-derived winds is known to be degraded by the presence of rain. Little work has been done in characterizing the impact of rain on C-band scatterometer winds, such as those from the Advanced Scatterometer (ASCAT) onboard Metop-A. In this paper, the rain impact on the ASCAT operational level 2 quality control (QC) and retrieved winds is investigated using the European Centre for Medium-range Weather Forecasts (ECMWF) model winds, the Tropical Rainfall Measuring Mission's (TRMM) Microwave Imager (TMI) rain data, and tropical buoy wind and precipitation data as reference. In contrast to Ku-band, it is shown that C-band is much less affected by direct rain effects, such as ocean splash, but effects of increased wind variability appear to dominate ASCAT wind retrieval. ECMWF winds do not well resolve the airflow under rainy conditions. ASCAT winds do but also show artifacts in both the wind speed and wind direction distributions for high rain rates (RRs). The operational QC proves to be effective in screening these artifacts but at the expense of many valuable winds. An image-processing method, known as singularity analysis, is proposed in this paper to complement the current QC, and its potential is illustrated. QC at higher resolution is also expected to result in improved screening of high RRs. [ABSTRACT FROM AUTHOR]

The European Organization for the Exploitation of Meteorological Satellites (EUMETSAT) Ocean and Sea Ice Satellite Application Facility delivers operational wind products from the Advanced Scatterometer (ASCAT) at 25 km and 12.5 km Wind Vector Cell (WVC) spacing. In these products, based on the backscatter processing performed at EUMETSAT, data closer than ~ 70 km (25 km products) or ~ 35 km (12.5 km products) to the coast are flagged because of land contamination. An alternative wind product is presented here which uses a different way of averaging the full resolution (FR) backscatter measurements from ASCAT. The FR backscatter measurements are screened for land contamination in the coastal zone, thus allowing the construction of WVCs that follow the coast line. The implied alternative spatial averaging allows good quality winds over sea as close as 15-20 km to the shore. The alternative (coastal) and nominal products are compared, and the resulting winds are validated with buoy winds, both in coastal and open sea regions. In regions far away from the coast, the ASCAT coastal and nominal products appear to be of identical quality, but fewer WVCs pass the quality control steps for the nominal product, indicating that the coastal product better resolves sub-WVC wind variability. In the coastal region, we anticipate enhanced wind variability due to katabatic and sea breeze effects, among others. However, the quality of the coastal winds in terms of buoy wind component difference standard deviation is almost as good as for the open sea winds. [ABSTRACT FROM AUTHOR]

The Advanced Scatterometer (ASCAT) wind data processor (AWDP) currently uses the so called CMOD5n geophysical model function (GMF), which was originally derived for the European Remote Sensing (ERS) scatterometers. In order to deliver a high-quality ASCAT wind product, the operational AWDP uses backscatter measurement corrections that are estimated visually (VOC) for each wind vector cell. We propose an alternative and previously established method for estimating correction tables based on numerical weather prediction ocean calibration residuals (NOC). It embodies a smooth incidence-angle dependent part that could serve as an appropriate ASCAT GMF correction, and a radar-beam-dependent residual. The incidence-angle-dependent part of these correction tables is due to differences in calibration procedure of the ERS and ASCAT scatterometers. For the high ASCAT incidence angles for which the GMF has not been assessed by ERS data, the modification is quite large, almost 1 dB. The incidence angle-dependent part is derived by fitting the OC residuals of all beams obtained over one year of data. It is subsequently used to adapt the GMF (yielding CMOD5na). The remaining radar-beam-dependent residual (NOCa) shows a wiggle pattern as function of incidence angle that is very persistent over time, apart from a seasonally varying offset. Both the effects of the GMF modification and the beam-dependent residual on the wind retrieval quality are investigated in this paper. Overall, the performance of NOC is better than that obtained with the previously used VOC calibration method, and the wind statistics show a much better symmetry of the left and right swath for NOC. The beam-dependent corrections improve the quality of the retrieved winds. NOC may thus be used for the intercalibration of the ERS and ASCAT scatterometers. [ABSTRACT FROM AUTHOR]