Search

Your search keyword '"Prabaharan, T."' showing total 110 results
Start Over Author "Prabaharan, T."
110 results on '"Prabaharan, T."'

10. Wear Analysis and Experimentation of Sintered Al-SiCp and Al-B4Cp Composites with Deformation Predictions.

Author

Prabaharan, T., Herbert Bejaxhin, A. Bovas, Dhanabalan, S., Ramanan, N., and R., Dilli Babu

Subjects
*POWDER metallurgy, *HEAT treatment, *METALLIC composites, *METALWORK, *WEAR resistance, *THERMAL conductivity, *FRACTIONS, *BORON carbides
Abstract

Complex geometries and porous components are very difficult to manufacture using traditional methods. Powder metallurgy is a metal forming process that allows complex shapes to be easily formed without loss of material. Metal matrix composites are used for high thermal conductivity and high wear resistance. In Al-B4CP, the composition of boron carbide is changed by 5%, 10%, 15%, and 20%. Al-SiCp composites maintain similar weight fractions. The blended mixture is compacted and sintered to the required standard sample size. After heat treatment, samples are tested for wear rate using a pin-on-disc wear tester, which is analyzed with analysis software. [ABSTRACT FROM AUTHOR]

Published
2022
Full Text
View/download PDF

11. Strain-cum-Deformation Analysis of Friction Stir Welded AA5052 and AA6061 Samples with Microstructural Analysis.

Author

Prabaharan, T., Reddy, M. B. S. Sreekara, Herbert Bejaxhin, A. Bovas, Ramanan, V., Pothamsetty Kasi, and jenaris

Subjects
*FRICTION stir welding, *DUPLEX stainless steel, *ALUMINUM-lithium alloys, *FRICTION materials, *WELDING
Abstract

Friction stir welding is a brand-new welding technique that was discovered in 1991 by Wayne Thomas in United Kingdom. It is a form of solid state welding in which a non-consumable electrode is used to unite two work components without melting either of them. The mechanical characteristics and numerous microscopic studies of materials used for friction stir welding, such as duplex stainless steel UNS S31803, SA 213 tube to SA387, Al7075 alloy, and AA6061 metal, are reviewed. Here, welded areas were the primary focus of the microscopic study, and the diverse outcomes are also discussed. [ABSTRACT FROM AUTHOR]

Published
2022
Full Text
View/download PDF

12. Comparative Testing of Tensile, Flexural and Impact Analysis on Coated and Uncoated Kenaf Fiber Reinforced Composite.

Author

Prabaharan, T., Herbert Bejaxhin, A. Bovas, Sankaran, S. Kamatchi, Ramanan, N., and D. S., Jenaris.

Subjects
*FIBROUS composites, *KENAF, *TENSILE tests, *FIBERS, *IMPACT strength, *FLEXURAL strength
Abstract

Due to its enhanced strength, stiffness, and tensile qualities, fibre reinforced composites are being employed more and more in the aerospace, automotive, plastic and mineral processing industries. Kenaf, jute, Kemp, and other types of reinforcing fibres are frequently utilized and come in strips. The design and analysis of the mechanical characteristics of the Kenaf fibre reinforced composite is the primary goal of this project. Different combinations of fibre and resin are examined for their various mechanical qualities, such as impact resistance, flexural strength, and tensile strength. By altering the fibre orientation and boosting impact strength, the composite is created. By altering the fibre orientation and boosting impact strength, the composite is created. The composite is personally examined using a variety of testing tools, and it is also examined using design software like Ansys. This research aims to increase the composite’s impact strength by adjusting the fibre length. The hydrogen peroxide solution is also coated on the composite before the tests are run. Comparisons are made between the experimental findings for coated and uncoated composites. [ABSTRACT FROM AUTHOR]

Published
2022
Full Text
View/download PDF

13. Lower Wishbone Modeling and Analysis for Commercial Vehicle Independent Suspension System.

Author

Prabaharan, T., Herbert Bejaxhin, A. Bovas, Periyaswamy, P., Ramanan, N., Ramkumar, K., and P., Chandramohan

Subjects
*MOTOR vehicle springs & suspension, *COMMERCIAL vehicles, *STRAINS & stresses (Mechanics)
Abstract

The primary goal of this paper is to design and analyse the entire double wishbone suspension system for a commercial vehicle in order to improve the vehicle’s stability and handling. The suspension system has seen tremendous advancement. A commercial vehicle’s suspension system must be long-lasting, light in weight, efficient, and cost-effective. The vehicle must be able to withstand the harsh off-road terrain environment. As a result, it is critical to concentrate on the stress strain analysis study of the lower wishbone arm in order to improve and modify the existing design. [ABSTRACT FROM AUTHOR]

Published
2022
Full Text
View/download PDF

28. ANALYZING THE EFFECT OF WATER SOLUBLE METAL CUTTING FLUID CONCENTRATION AND MACHINING PARAMETERS ON TOOL WEAR, SURFACE ROUGHNESS AND HARDNESS OF CNC MACHINE TURNED SURFACE USING Al2O3-TICN MIXED INSERT.

Author

SARAVANAN, B. and PRABAHARAN, T.

Subjects
*MACHINING, *METAL cutting, *CUTTING fluids, *MACHINE tools, *SURFACE roughness, *SIGNAL-to-noise ratio
Abstract

The experimental study aims at working out an optimal proportion of water soluble metal cutting fluid with water that provides good surface finish, increases the tool lifetime and reduces the work hardening effect due to machining. The study is performed on LMW Smarturn CNC machine with Al2O3-TiCN Mixed Inserts. The experiment is designed as Taguchi L9 Orthogonal Array Design. The data are analysed using signal to noise ratio and the optimal parameters are determined using multi response performance index. [ABSTRACT FROM AUTHOR]

Published
2019

38. Characterization of High Power Microwave Radiation by an Axially Extracted Vircator

Author

Verma, Rishi, primary, Shukla, Rohit, additional, Sharma, Surender Kumar, additional, Banerjee, Partha, additional, Das, Rashmita, additional, Deb, Pankaj, additional, Prabaharan, T., additional, Das, Basanta, additional, Mishra, Ekansh, additional, Adhikary, Biswajit, additional, Sagar, Karuna, additional, Meena, Manraj, additional, and Shyam, Anurag, additional

Published
2014
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results