Search

Understanding climate change and possible solutions to recent increases in concentrations of major GHG concentrations dependent upon quantifying the emission inventory of these gases. The objective of this study, which is part of the Regional Carbon Cycle Assessment and Processes-2 (RECCAP2) project, is to estimate the country-specific GHGs budget (sources and sinks) for the South Asia (SA) region for the 2010s. The region comprises seven countries: Afghanistan, Bangladesh, Bhutan, India, Nepal, Pakistan, and Sri Lanka. Each country in the region is experiencing rapid changes due to the continuous development of agriculture, deforestation, reforestation, afforestation, and the increased demand for land for people to live in. In this study, we synthesize top-down (TD) and bottom-up (BU) model results and ground-based and other data sets to estimate the GHG emissions for carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) due to anthropogenic and natural biospheric activities. Major contributing factors include net biome productivity, fossil fuel emissions, inland waters, and wetland and wet/dry soils. Our study shows that the SA region was the net source of atmospheric CO2 for the 2010s. BU estimates for CO2, CH4, and N2O emissions were 1974, 1047, and 715 Tg CO2eq, and TD estimates were 2010, 1247, and 799 Tg CO2 eq. The total GHG emission for the region based on BP and TD were 3736 and 4056 Tg CO2 eq. Among SA countries, India was the most significant contributor to the total GHG emission.

As the electronics industry is integrating more and more new molecules to utilize them in logic circuits and memories to achieve ultra-high efficiency and device density, many organic structures emerged as promising candidates either in conjunction with or as an alternative to conventional semiconducting materials such as but not limited to silicon. Owing to rotaxane's mechanically interlocked molecular structure consisting of a dumbbell-shaped molecule threaded through a macrocycle, they could be excellent nanomachines in molecular switches and memory applications. As a nanomachine, the macrocycle of rotaxane can move reversibly between two stations along its axis under external stimuli, resulting in two stable molecular configurations known as "ON" and "OFF" states of the controllable switch with distinct resistance. There are excellent reports on rotaxane's structure, properties, and function relationship and its application to molecular electronics (Ogino

International audience; We present a comparison of atmospheric transport model (ATM) simulations for carbonyl sulfide (COS), within the framework of the atmospheric tracer transport model intercomparison project "TransCom-COS." Seven ATMs participated in the experiment and provided simulations of COS mixing ratios over the years 2010-2018, using state-of-the-art surface fluxes for various components of the COS budget: biospheric sink, oceanic source, sources from fire and industry. The main goal of TransCom-COS is to investigate the impact of the transport uncertainty and emission distribution in simulating the spatio-temporal variability of tropospheric COS mixing ratios. A control case with seasonal surface fluxes of COS was constructed. The results indicate that the COS mixing ratios are underestimated by at least 50 parts per trillion (ppt) in the tropics, pointing to a missing tropical source. In summer, the mixing ratios are overestimated by at least 50 ppt above 40°N, pointing to a likely missing sink in the high northern latitudes. Regarding the latitudinal profile, the model spread is greater than 60 ppt above 40°N in boreal summer. Regarding the seasonal amplitude, the model spread reaches 50 ppt at 6 out of 15 sites, compared to an observed seasonal amplitude of 100 ppt. All models simulated a too late minimum by at least 2-3 months at two high northern-latitude sites, likely owing to errors in the seasonal cycle in the ocean emissions. This study highlighted the shortcomings in the COS global budget that need to be resolved before using COS as a photosynthesis tracer. Plain Language Summary In this study, we evaluate the state-of-the-art fluxes for various components of the carbonyl sulfide (COS) budget: biospheric sink, oceanic source, sources from fire and industry. A control case with seasonal surface fluxes of COS was constructed. Seven atmospheric transport models provided simulations of COS mixing ratios. Then, the simulated mixing ratios were evaluated against atmospheric measurements at several surface sites. Results show that all models fail to capture the observed latitudinal distribution and that the model spread is small compared to the model-observation mismatch. In summer, the overestimated mixing ratios above 40°N point to a likely missing sink in the high northern latitudes. The underestimated mixing ratios in the tropics point to a missing tropical source. This study highlighted the shortcomings in the COS global budget that need to be resolved before using COS as a photosynthesis tracer. REMAUD ET AL.

For the first time, we present a comparison of atmospheric transport models for Carbonyl Sulfide (COS), a promising photosynthesis tracer, within the framework of the ongoing Atmospheric Tracer Transport Model Intercomparison Project (TransCom). Seven atmospheric transport models participated in the inter-comparison experiment and provided simulations of COS mixing ratios in the troposphere over a 10-year period (2010–2019), using prescribed state of the art surface fluxes for each component of the atmospheric COS budget (i.e., linked to vegetation, soil, ocean, fire and industry). The main goals of TransCom-COS are (a) to investigate the roles of the transport uncertainty and emission distribution in simulating the spatio-temporal variability of COS mixing ratio in the troposphere and (b) to assess the sensitivity of simulated tropospheric COS mixing ratio to the seasonal variability of the COS terrestrial fluxes. Models were run with the same prior emissions and without chemistry to isolate differences due to transport. Two COS flux scenarios were compared: one using a biospheric flux with a monthly time resolution and the other one using a biospheric flux with a tri-hourly time resolution. In addition, we investigated the sensitivity of the simulated concentrations to different biospheric fluxes and to indirect oceanic emissions through DMS. The modelled COS mixing ratios were assessed against observations from in situ surface stations, aircraft and ground based FTIR stations. Using the state of the art surface fluxes for each component of the COS budget, preliminary results indicate that all transport models fail to capture the surface latitudinal distribution of COS. The COS mixing ratios are underestimated by at least 50 ppt in the tropics, pointing to a missing tropical source. In summer, the mixing ratios are overestimated by at least 50 ppt above 40N, pointing to a likely missing sink in the high northern latitudes during this period. The surface variability of COS mixing ratios is more sensitive to transport models than to a change in biospheric fluxes (two estimates based on different global Land Surface Models). Regarding the seasonal mean latitudinal profiles, the model spread is greater than 60 ppt above 40N in boreal summer and in the vicinity of anthropogenic sources. Regarding the seasonal amplitude, the model spread reaches 50 ppt at 6 sites out of 15, compared to an observed seasonal amplitude of 100 ppt. All models simulated a too late minimum by 2 to 3 months at northern sites ALT, BRW owing to likely errors in the seasonal cycle in the ocean emissions. Finally, the temporal resolution of the biospheric fluxes (monthly versus tri-hourly) has a small impact (less than 20 ppt) on the mean seasonal cycle at stations from the NOAA network.

A new special collection in AGU journals will present findings from the Second REgional Carbon Cycle Assessment and Processes (RECCAP2) study with a decade of data on greenhouse gas growth.

Additive manufacturing technologies are expected to disrupt the majority of the traditional way of manufacturing methods, particularly in the field of medical and healthcare. Bones and teeth are vital organs that are susceptible to various disorders due to environmental, traumatic, genetic factors and inherent malignant disorders. Most of the implants/prostheses normally used are cast and have a standard size and shape. Additive manufacturing has opened opportunities to replace these hard tissues with customized implants, prostheses or the whole additive manufactured organ itself while considering anatomical/structural parts and functional aspects of the body. It helps to visualize and mimic internal organs/models, pre-planning via simulation, anatomical demonstration, treatments and surgical teaching/training to technical staff by medical professionals. The current review covers additive manufacturing applications for the possible treatment of osteosarcoma, bone tumors, traumatic fracture, congenital anomalies, dental diseases, vertebral and cranial abnormalities, etc. from toe to head highlighting printing of long bones, short bones, cartilages, teeth and more based on the general classification of bones shape, that is, the external shape and size of different bones with some case studies. The article has also touched upon the additive manufacturing competitive edge over the conventional methods in terms of complexity, easiness, cost-effectiveness and reduced time. However, the internal structures have not been addressed so far in additive manufacturing which could be a new corner to enhance the properties of bones and teeth in the future.

As VLSI technology is shifting from microelectronics to nanoelectronics era, bi-stable [2]rotaxane emerges as a promising candidate for molecular electronics. A typical voltage-driven [2]rotaxane consists of a cyclobis-(paraquat-p-phenylene) macrocycle encircling a dumbbell shape molecular chain and moving between two stations on the chain: tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP). As a molecular switch, the macrocycle can move reversibly between two stations along its axis with appropriate driving voltage, resulting in two stable molecular conformational states with distinct high and low resistance. This makes it a well-suited candidate to represent binary states ("0" and "1") for digital electronics. In this work, we performed molecular simulation to investigate the switching mechanism of [2]rotaxane molecule. We used distance and angle variables to characterize the movement of the macrocycle along the chain, and compared the switching behavior of [2]rotaxane in water, ethanol, dimethyl ether and vacuum. The results show that the solvent environment plays an important role in the switching characteristics of [2]rotaxane molecule. The switching of [2]rotaxane is stable, controllable, reversible and repeatable. We also looked into potential failure mechanism of the [2]rotaxane, which could shed light on the fault model, testing and reliability enhancement of [2]rotaxane based molecular electronics. Our simulation results support that [2]rotaxane molecules possess potential to be used for molecular memory and logic applications.

The graphene nanoparticles incorporated in thin polystyrene film in different configurations, garner into unique phenomenon of self-assembly regulated by the self-organization of the thin polystyrene film. The polystyrene–graphene nanoparticles composite when spin-coated together to form a thin film over a substrate, was observed to self-assemble in a Voronoi tessellation of ribbon-like structure. The suppression of dewetting of thin polystyrene film at the stage, where the holes coalesce and grow to form Voronoi tessellation of polymeric ribbons, sways the path for the graphene nanoparticles to self-assemble and organize into a Voronoi tessellation-like pattern of graphene nanoparticles. In the second method, the graphene nanoparticles dispersed in solvent were casted over the instability based dewetting patterns formed on the surface of the thin polystyrene film. This method exclusively caused the graphene nanoparticles to arrange in a polygonal array of dots prompted by the dynamics and morphology of dewetting. The reversals of the dewetted patterns were observed in this process, because of the solvent evaporation and Marangoni flow. The graphene nanoparticles in the presence of solvent destruct and self-healed the dewetted holes formed on the surface of the pure polystyrene thin film.

COVID-19 induced restrictions resulted in a lowered fine aerosol particle and trace gas concentration across several urban places around the world, providing a natural opportunity to study effects of anthropogenic activities on emissions of air pollutants. Impact of sudden suspension of human activities on air pollution was analyzed by studying the change in satellite retrieved NO2 concentrations and top-down NOx emission over the urban and rural areas around Delhi. NO2 was chosen for being the most indicative of emission intensity due to its short lifetime of the order of a few hours in the planetary boundary layer. We present a robust temporal comparison of Ozone Monitoring Instrument (OMI) retrieved NO2 column density during the lockdown with the counterfactual baseline concentrations, extrapolated from the long-term trend and seasonal cycle components of NO2 using observations during 2015 to 2019. NO2 columns in the urban area of Delhi experienced an anomalous relative change ranging from 60.0% decline during the Phase 1 of lockdown (March 25-April 13, 2020) to 3.4% during the post-lockdown Phase 5. In contrast, we find no substantial reduction in NO2 concentrations over the rural areas. To clarify the quantitative impact of the lockdown measures, weekly top-down NOx emissions were estimated from TROPOspheric Monitoring Instrument (TROPOMI) retrieved NO2 by accounting for horizontal advection derived from the steady state continuity equation. NOx emissions from urban areas and power plants exhibited a mean decline of 72.19% and 53.4% respectively in Phase 1 compared to the pre-lockdown business-as-usual phase. Due to absence of confounding emission source activity during lockdown, emission estimates over urban areas and power-plants were validated with respective electricity generation reports and Google’s mobility reports. A higher anomaly in emission estimates suggests that comparison of only concentration change, without accounting for the dynamical and photochemical conditions, may mislead evaluation of lockdown impact. Our results are also useful for optimizing bottom-up emission inventories.

Graphene-based nanocomposites have been extensively employed to design biomimetic platforms epitomizing the structural and functional complexity of the tissue with increased robustness and physiological relevance. The adhesive and mechanical cues provided by such nanocomposite microenvironment kindles the cell fate decisions. Owing to their differentiation and regenerative potential, Human Mesenchymal Stem Cells (hMSCs) have proven to be a promising candidate for treating several neurodegenerative disorders. However, their degree of differentiation and its reproducibility is often jeopardized by multiple levels of heterogeneity, thereby compromising their translational utilization. Baffled at this crossroad, we designed a one-step approach to electrospin Poly-caprolactone (PCL) nanocomposite, with varying graphene concentrations, to capture, for the first time, the realms of their biocompatible and anisotropic characteristics, providing biomimetic platforms for improved differentiation of human bone marrow-derived MSCs (hMSCs) into neurons. Interestingly, PCL having 0.05% graphene (PCL-G0.05) showcased an ideal nano-topography with an unprecedented combination of guidance stimuli and substrates cues, aiding in enhanced differentiation of hMSCs into dopaminergic neurons (DA). These newly differentiated DA neurons were characterized at gene, protein, and functional levels and were seen to exhibit unique neuronal arborization, enhanced intracellular Ca2+ influx, and dopamine secretion, thereby opening new horizons for pre-clinical and clinical applications.

The 11th Symposium on Polar Science/Special session: [S] Accelerating Arctic research: Recent progress and future prospect of Arctic research, Poster presentations, Mon. 16 Nov. - Fri. 18 Dec.

The graphene quantum dot (GQD) is a carbon allotrope with a planar surface amenable for functionalization and nanoscale dimensions that confer photoluminescent properties. Collectively, these properties render GQDs an advantageous platform for nanobiotechnology applications, including as optical biosensors and delivery platforms. In particular, noncovalent functionalization offers a route to reversible modification and preservation of the pristine GQD substrate. However, a clear paradigm for GQD noncovalent functionalization has yet to be realized. Herein, we demonstrate the feasibility of noncovalent polymer adsorption to the GQD surface, with a specific focus on single-stranded DNA (ssDNA). We study how GQD oxidation level affects the propensity for polymer adsorption by synthesizing and characterizing four types of GQD substrates and investigating noncovalent polymer association to these substrates. Distinct adsorption methods are developed for successful ssDNA attachment based upon the GQD’s initial level of oxidation. ssDNA adsorption to the GQD is confirmed by atomic force microscopy, by inducing ssDNA desorption, and with molecular dynamics simulations. ssDNA is determined to adsorb strongly to no-oxidation GQDs, weakly to low-oxidation GQDs, and not at all for heavily oxidized GQDs. We hypothesize that high GQD oxygen content disrupts the graphitic carbon domains responsible for stacking with the aromatic ssDNA bases, thus preventing the formation of stable polymer-GQD complexes. Finally, we develop a more generic adsorption platform and assess how the GQD system is tunable by modifying both the polymer sequence and type.

Metastasis contributes to over 90 percent of cancer mortalities and may be influenced by the extracellular matrix (ECM). ECM microenvironments differ in matrix organization, cell-matrix adhesions, and fiber rigidity, which may affect cancer migration and, thus, should be investigated. To understand the interactions between cancer cells and the ECM, we simulate local invasion through ECM organizations of varying determinants. Randomly curved organizations of normal ovarian stroma exhibit minimal local invasion. In contrast, wave-like and parallel linear structures in reorganized ECM organizations provide contact guidance, which increases cancer invasiveness. ECM organizations with strong cell-matrix attachments generate cell pseudopodia, which aid in increasing invasion rate, while weaker attachments prevent the cells from attaching to the fibers and forming pseudopodia, limiting local invasion. ECM organizations with rigid fibers elongate the cell body, allowing them to form cell protrusions and spread rapidly. Conversely, soft fibers stimulate cell rounding and limit migration. Optimizing cell-matrix adhesions and fiber rigidity results in below 10 percent local invasion and reinforces the importance of using computational modeling to discover novel approaches to restricting cancer movement.

Contractile behavior of cardiomyocytes relies on directed signal propagation through the electroconductive networks that exist within the native myocardium. Due to their unique electrical properties, electroactive materials, such as graphene, have recently emerged as promising candidate materials for cardiac tissue engineering applications. In this work, the potential of three-dimensional (3D) nanofibrous graphene and poly(caprolactone) (PCL + G) composite scaffold for cardiac tissue engineering has been explored for the first time. The addition of graphene into PCL led to an increased volume conductivity of scaffolds with an even distribution of graphene particles throughout the matrix. Graphene particles provided local conductive sites within the PCL matrix, which enabled application of external electrical stimulation throughout the scaffold using a custom point stimulation device. When mouse embryonic stem cell derived cardiomyocytes (mES-CM) were seeded on PCL + G scaffolds, cells adhered well, contracted spontaneously, and exhibited classical cardiomyocyte phenotype confirming the biocompatibility of electroactive PCL + G scaffolds. Further functional characterization demonstrated that graphene especially affected Ca2+ handling properties of mES-CM compared to that of cardiomyocytes cultured in 2D culture, highlighting the potential of PCL + G for in vitro cardiac tissue engineering. © 2018 Wiley Periodicals, Inc. J. Biomed. Mater. Res. Part A: 106A: 2923-2933, 2018.

A novel assembly of a photocathode and a photoanode is investigated to explore their complementary effects in enhancing the photovoltaic performance of a quantum-dot solar cell (QDSC). While p-type nickel oxide (NiO) has been used previously, antimony selenide (Sb2Se3) has not been used in a QDSC, especially as a component of a counter electrode (CE) architecture that doubles as the photocathode. Here, near-infrared (NIR) light-absorbing Sb2Se3 nanoparticles (NPs) coated over electrodeposited NiO nanofibers on a carbon (C) fabric substrate was employed as the highly efficient photocathode. Quasi-spherical Sb2Se3 NPs, with a band gap of 1.13 eV, upon illumination, release photoexcited electrons in addition to other charge carriers at the CE to further enhance the reduction of the oxidized polysulfide. The p-type conducting behavior of Sb2Se3, coupled with a work function at 4.63 eV, also facilitates electron injection to polysulfide. The effect of graphene quantum dots (GQDs) as co-sensitizers as well as e...

It is one of the most important needs to develop renewable, scalable and multifunctional methods for the fabrication of 3D carbon architectures. Even though a lot of methods have been developed to create porous and mechanically stable 3D scaffolds, the fabrication and control over the synthesis of such architectures still remain a challenge. Here, we used Magnetospirillum magneticum (AMB-1) bacteria as a bio-template to fabricate light-weight 3D solid structure of carbon nanotubes (CNTs) with interconnected porosity. The resulting porous scaffold showed good mechanical stability and large surface area because of the excellent pore interconnection and high porosity. Steered molecular dynamics simulations were used to quantify the interactions between nanotubes and AMB-1 via the cell surface protein MSP-1 and flagellin. The 3D CNTs-AMB1 nanocomposite scaffold is further demonstrated as a potential substrate for electrodes in supercapacitor applications.

Rett syndrome (RTT), mainly caused by mutations in the methyl-CpG binding protein 2 (MeCP2), is one of the most prevalent intellectual disorders without effective therapeutics. Here, we used two-dimensional and three-dimensional human brain cultures to investigate MeCP2 function. We found that MeCP2 mutations cause severe abnormalities in human interneurons (INs). Surprisingly, the treatment with a BET inhibitor, JQ1, rescued the molecular and functional phenotypes of MeCP2 mutant INs. We uncovered that abnormal increases in the chromatin binding of BRD4 and the enhancer-promoter interactions underlie the abnormal transcription in MeCP2 mutant INs, which were recovered to normal levels by JQ1. We revealed the cell type-specific transcriptome impairment in MeCP2 mutant region-specific human brain organoids, which were rescued by JQ1. Finally, JQ1 ameliorated RTT-like phenotypes in mice. These data demonstrate BRD4 dysregulation is a critical driver for RTT etiology, and suggest targeting BRD4 could be a potential therapeutic opportunity for RTT.

In this work, we present the formation of unique self-assembled graphene patterns at the interface between graphene and a thin polystyrene (PS) film at room temperature. When a minute amount of graphene dispersed in a solvent is added on PS and spin-coated into a thin film, the concentration gradient caused by centrifugal force leads to a Marangoni flow that in conjunction with the dewetting of the underlying PS at the edges lead to a series of very interesting and self-assembled morphologies of graphene. At the particle enriched zone near the center, the graphene-particles exhibit morphologies ranging from folds, wrinkles, flakes, onion-rings to blob structures depending on the aspect ratio. The graphene-particles thrown to the periphery are found to march back towards the central portion leading to the unique formation of very ordered nano-scale scratches on the PS substrate. The nano-particles that end up into the confined rims in the intermediate region get twisted into nano-ribbons and dendrimers. The paper sheds light on the forces responsible for the evolution of different origami structures formed as a result of the underlying dewetting dynamics without the aid of any high-end instrumentation or process. Since these self-assembled structures are formed over a bio-compatible polymer, the structures are anticipated to find applications in fabricating biosensor, super-capacitors, and biomedical microfluidic devices.

Fundamental understanding of interactions at the interface of biological molecules, such as proteins, and nanomaterials is crucial for developing various biocompatible hybrid materials and biosensing platforms. Biosensors comprising of graphene-based conductive nanomaterials offer the advantage of higher sensitivity and reliable diagnosis mainly due to their superior specific surface area and ballistic conductivity. Furthermore, conductive nanocomposite structures that immobilize proteins can synergize the properties of both transducers and molecular recognition elements improving the performance of the biosensing device. Here we report for the first time, using a combined molecular dynamics simulations and experimental approach, the interactions between avidin and graphene for the development of a sensing platform that can be used for the detection of biological macromolecules such as mismatch repair proteins through biotinylated DNA substrates. We find that the interactive forces between avidin and graphene are mainly hydrophobic, along with some van der Waals, electrostatic and hydrogen bonding interactions. Notably, the structure and function of the avidin molecule are largely preserved after its adsorption on the graphene surface. The MD results agree well with scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) analysis of avidin immobilized on a graphenated polypyrrole (G-PPy) conductive nanocomposite confirming the adsorption of avidin on graphene nanoplatelets as observed from the Fourier-transform infrared spectroscopy (FTIR).

Novel approaches to boost quantum dot solar cell (QDSC) efficiencies are in demand. Herein, three strategies are used: (i) a hydrothermally synthesized TiO2–multiwalled carbon nanotube (MWCNT) composite instead of conventional TiO2, (ii) a counter electrode (CE) that has not been applied to QDSCs until now, namely, tin sulfide (SnS) nanoparticles (NPs) coated over a conductive carbon (C)-fabric, and (iii) a quasi-solid-state gel electrolyte composed of S2−, an inert polymer and TiO2 nanoparticles as opposed to a polysulfide solution based hole transport layer. MWCNTs by virtue of their high electrical conductivity and suitably positioned Fermi level (below the conduction bands of TiO2 and PbS) allow fast photogenerated electron injection into the external circuit, and this is confirmed by a higher efficiency of 6.3% achieved for a TiO2–MWCNT/PbS/ZnS based (champion) cell, compared to the corresponding TiO2/PbS/ZnS based cell (4.45%). Nanoscale current map analysis of TiO2 and TiO2–MWCNTs reveals the presence of narrowly spaced highly conducting domains in the latter, which equips it with an average current carrying capability greater by a few orders of magnitude. Electron transport and recombination resistances are lower and higher respectively for the TiO2–MWCNT/PbS/ZnS cell relative to the TiO2/PbS/ZnS cell, thus leading to a high performance cell. The efficacy of SnS/C-fabric as a CE is confirmed from the higher efficiency achieved in cells with this CE compared to the C-fabric based cells. Lower charge transfer and diffusional resistances, slower photovoltage decay, high electrical conductance and lower redox potential impart high catalytic activity to the SnS/C-fabric assembly for sulfide reduction and thus endow the TiO2–MWCNT/PbS/ZnS cell with a high open circuit voltage (0.9 V) and a large short circuit current density (∼20 mA cm−2). This study attempts to unravel how simple strategies can amplify QDSC performances.

The counter electrode (CE), despite being as relevant as the photoanode in a quantum dot solar cell (QDSC), has hardly received the scientific attention it deserves. In this study, nine CEs (single-walled carbon nanotubes (SWCNTs), tungsten oxide (WO3), poly(3,4-ethylenedioxythiophene) (PEDOT), copper sulfide (Cu2S), candle soot, functionalized multiwalled carbon nanotubes (F-MWCNTs), reduced tungsten oxide (WO3–x), carbon fabric (C-Fabric), and C-Fabric/WO3–x) were prepared by using low-cost components and facile procedures. QDSCs were fabricated with a TiO2/CdS film which served as a common photoanode for all CEs. The power conversion efficiencies (PCEs) were 2.02, 2.1, 2.79, 2.88, 2.95, 3.78, 3.66, 3.96, and 4.6%, respectively, and the incident photon to current conversion efficiency response was also found to complement the PCE response. Among all CEs employed here, C-Fabric/WO3–x outperforms all the other CEs, for the synergy between C-Fabric and WO3–x comes to the fore during cell operation. The low...

Advances in nanotechnology has become enormously promising in the field of health science, in developing many medical equipment. The possible effects of novel nanomedical technology significantly improve the diagnosis and therapeutic aspects of many diseases. Nanomaterials are being applied in operation, disease diagnosis as well as therapy, molecular imaging, implant technology, tissue engineering, as well as a device for efficient drug delivery, protein and gene release. In this review we discussed the utility of nanoscience in health issues, and the knowledge from there how can be disseminated to the educators and parents for expanding STEM (Science, Technology, Engineering and Math) programs.

Additional file 1: Figure S1. Detail of the masks used for space averaging and construction of the error covariance matrix. Upper row: rural, urban and sea domains. Lower row: areas corresponding to EDGAR grid cells with flux higher than 1 mg m−2 s−1 (left panel) and 0.1 mg m−2 s−1 (center panel), for reference. Right panel shows the inner domain used when averaging over all areas.

Human cortical organoids (hCOs), derived from human embryonic stem cells (hESCs), provide an excellent platform to study human brain development and diseases in complex 3D tissue. However, current hCOs lack microvasculature, resulting in limited oxygen and nutrient delivery to the inner-most parts of hCOs. Here, we engineered hESCs to ectopically express human ETS variant 2 (hETV2) to create in vitro vasculature in hCOs, namely vhCOs (vascularized hCOs). hETV2-expressing cells in hCOs contributed to forming a complex vascular-like network in hCOs. Importantly, the presence of vascularization resulted in enhanced functional maturation of organoids. We found that vhCOs acquired several blood-brain barrier (BBB) characteristics, including an increase in the expression of tight junctions, nutrient transporters, and trans-endothelial electrical resistance. Finally, hETV2-induced endothelium supported the formation of perfused blood vessels in vivo. These vhCOs form vasculature that resemble the early prenatal brain, and present a robust model to study brain disease in vitro.

Background In order to use in situ measurements to constrain urban anthropogenic emissions of carbon dioxide (CO2), we use a Lagrangian methodology based on diffusive backward trajectory tracer reconstructions and Bayesian inversion. The observations of atmospheric CO2 were collected within the Tokyo Bay Area during the Comprehensive Observation Network for TRace gases by AIrLiner (CONTRAIL) flights, from the Tsukuba tall tower of the Meteorological Research Institute (MRI) of the Japan Meteorological Agency and at two surface sites (Dodaira and Kisai) from the World Data Center for Greenhouse Gases (WDCGG). Results We produce gridded estimates of the CO2 emissions and calculate the averages for different areas within the Kanto plain where Tokyo is located. Using these inversions as reference we investigate the impact of perturbing different elements in the inversion system. We modified the observations amount and location (surface only sparse vs. including aircraft CO2 observations), the background representation, the wind data used to drive the transport model, the prior emissions magnitude and time resolution and error parameters of the inverse model. Conclusions Optimized fluxes were consistent with other estimates for the unperturbed simulations. Inclusion of CONTRAIL measurements resulted in significant differences in the magnitude of the retrieved fluxes, 13% on average for the whole domain and of up to 21% for the spatiotemporal cells with the highest fluxes. Changes in the background yielded differences in the retrieved fluxes of up to 50% and more. Simulated biases in the modelled transport cause differences in the retrieved fluxes of up to 30% similar to those obtained using different meteorological winds to advect the Lagrangian trajectories. Perturbations to the prior inventory can impact the fluxes by ~ 10% or more depending on the assumptions on the error covariances. All of these factors can cause significant differences in the estimated flux, and highlight the challenges in estimating regional CO2 fluxes from atmospheric observations. Electronic supplementary material The online version of this article (10.1186/s13021-019-0118-8) contains supplementary material, which is available to authorized users.

Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere – the “global carbon budget” – is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and methodology to quantify the five major components of the global carbon budget and their uncertainties. Fossil CO2 emissions (EFF) are based on energy statistics and cement production data, while emissions from land use and land-use change (ELUC), mainly deforestation, are based on land use and land-use change data and bookkeeping models. Atmospheric CO2 concentration is measured directly and its growth rate (GATM) is computed from the annual changes in concentration. The ocean CO2 sink (SOCEAN) and terrestrial CO2 sink (SLAND) are estimated with global process models constrained by observations. The resulting carbon budget imbalance (BIM), the difference between the estimated total emissions and the estimated changes in the atmosphere, ocean, and terrestrial biosphere, is a measure of imperfect data and understanding of the contemporary carbon cycle. All uncertainties are reported as ±1σ. For the last decade available (2008–2017), EFF was 9.4±0.5 GtC yr−1, ELUC 1.5±0.7 GtC yr−1, GATM 4.7±0.02 GtC yr−1, SOCEAN 2.4±0.5 GtC yr−1, and SLAND 3.2±0.8 GtC yr−1, with a budget imbalance BIM of 0.5 GtC yr−1 indicating overestimated emissions and/or underestimated sinks. For the year 2017 alone, the growth in EFF was about 1.6 % and emissions increased to 9.9±0.5 GtC yr−1. Also for 2017, ELUC was 1.4±0.7 GtC yr−1, GATM was 4.6±0.2 GtC yr−1, SOCEAN was 2.5±0.5 GtC yr−1, and SLAND was 3.8±0.8 GtC yr−1, with a BIM of 0.3 GtC. The global atmospheric CO2 concentration reached 405.0±0.1 ppm averaged over 2017. For 2018, preliminary data for the first 6–9 months indicate a renewed growth in EFF of +2.7 % (range of 1.8 % to 3.7 %) based on national emission projections for China, the US, the EU, and India and projections of gross domestic product corrected for recent changes in the carbon intensity of the economy for the rest of the world. The analysis presented here shows that the mean and trend in the five components of the global carbon budget are consistently estimated over the period of 1959–2017, but discrepancies of up to 1 GtC yr−1 persist for the representation of semi-decadal variability in CO2 fluxes. A detailed comparison among individual estimates and the introduction of a broad range of observations show (1) no consensus in the mean and trend in land-use change emissions, (2) a persistent low agreement among the different methods on the magnitude of the land CO2 flux in the northern extra-tropics, and (3) an apparent underestimation of the CO2 variability by ocean models, originating outside the tropics. This living data update documents changes in the methods and data sets used in this new global carbon budget and the progress in understanding the global carbon cycle compared with previous publications of this data set (Le Quéré et al., 2018, 2016, 2015a, b, 2014, 2013). All results presented here can be downloaded from https://doi.org/10.18160/GCP-2018.

Graphene and its derivatives having at least one dimension in nanoscale range have attracted tremendous attention in recent years due to their unique electronic, optical, chemical, and mechanical properties. This chapter is about graphene quantum dots (GQDs) that are zero-dimensional graphene derivatives with one to few layers of graphene sheet having size range less than 20nm. This chapter is an overview of synthesis of GQDs by top-down and bottom-up approaches, as well as detailed methods of synthesis of GQDs by acidic oxidation of carbon fibers. Owing to their extremely small size, quantum confinement, edge effect, biocompatibility, low toxicity, photostability as well as water solubility they are excellent candidates for understanding biological systems and cellular processes at the molecular scale. These are also suitable nanomaterials to replace inorganic semiconducting nanoparticles (e.g., CdS, CdSe, ZnS, and Si) which are toxic to biological systems.

A novel nanocomposite has been developed using extracted cellulose from marine algae coated with conductive polypyrrole and graphene nanoplateletes. The nanocomposite fabricated via in situ polymerization was used as an electrode for a supercapacitor device. The nanocomposite material has been electrochemically characterized using cyclic voltammetry to test its potential to super-capacitive behavior. The specific capacitance of polypyrrole-graphene-cellulose nanocomposite as calculated from cyclic voltammetry curve is 91.5 Fg-1 at the scan rate 50 mV s-1. Transmission electron microscope images show the polymerized polypyrrole -graphene coated cellulosic nanofibers. Scanning electron microscope images reveal an interesting "necklace" like beaded morphology on the cellulose fibers. It is observed that the necklace like structure start to disintegrate with the increase in graphene concentration. The open circuit voltage of the device with polypyrrole-graphene-cellulose electrode was found to be around 225 mV and that of the polypyrrole-cellulose device is only 53 mV without graphene. The results suggest marked improvement in the performance of the nanocomposite supercapacitor device upon graphene inclusion.

Graphene and its derivatives having at least one dimension in nanoscale range have attracted tremendous attention in recent years due to their unique electronic, optical, chemical, and mechanical properties. This chapter is about graphene quantum dots (GQDs) that are zero-dimensional graphene derivatives with one to few layers of graphene sheet having size range less than 20nm. This chapter is an overview of synthesis of GQDs by top-down and bottom-up approaches, as well as detailed methods of synthesis of GQDs by acidic oxidation of carbon fibers. Owing to their extremely small size, quantum confinement, edge effect, biocompatibility, low toxicity, photostability as well as water solubility they are excellent candidates for understanding biological systems and cellular processes at the molecular scale. These are also suitable nanomaterials to replace inorganic semiconducting nanoparticles (e.g., CdS, CdSe, ZnS, and Si) which are toxic to biological systems.

During a heart failure, an increased content and activity of nucleoside diphosphate kinase (NDPK) in the sarcolemmal membrane is responsible for suppressing the formation of the second messenger cyclic adenosine monophosphate (cAMP)—a key component required for calcium ion homeostasis for the proper systolic and diastolic functions. Typically, this increased NDPK content lets the surplus NDPK react with a mutated G protein in the beta-adrenergic signal transduction pathway, thereby inhibiting cAMP synthesis. Thus, it is thus that inhibition of NDPK may cause a substantial increase in adenylate cyclase activity, which in turn may be a potential therapy for end-stage heart failure patients. However, there is little information available about the molecular events at the interface of NDPK and any prospective molecule that may potentially influence its reactive site (His118). Here we report a novel computational approach for understanding the interactions between graphene oxide (GO) and NDPK. Using molecular dynamics, it is found that GO interacts favorably with the His118 residue of NDPK to potentially prevent its binding with adenosine triphosphate (ATP), which otherwise would trigger the phosphorylation of the mutated G protein. Therefore, this will result in an increase in cAMP levels during heart failure.