Search

This research contributes to long-term structural health monitoring (SHM) by exploring radio frequency energy-powered sensor nodes (RF-SNs) embedded in concrete. Unlike traditional in-situ monitoring systems relying on batteries or wire-connected power sources, the RF-SN captures radio energy from a mobile radio transmitter for sensing and communication. This offers a cost-effective solution for consistent in-situ perception. To optimize the system performance across various situations, we've explored both active and passive communication methods. For the active RF-SN, we implement a specialized control circuit enabling the node to transmit data through ZigBee protocol at low incident power. For the passive RF-SN, radio energy is not only for power but also as a carrier signal, with data conveyed by modulating the amplitude of the backscattered radio wave. To address the challenge of significant attenuation of the backscattering signal in concrete, we utilize a square chirp-based modulation scheme for passive communication. This scheme allows the receiver to successfully decode the data even under a negative signal-to-noise ratio (SNR) condition. The experimental results indicate that an active RF-SN embedded in concrete at a depth of 13.5 cm can be effectively powered by a 915MHz mobile radio transmitter with an effective isotropic radiated power (EIRP) of 32.5dBm. This setup allows the RF-SN to send over 1 kilobyte of data within 10 seconds, with an additional 1.7 kilobytes every 1.6 seconds of extra charging. For the passive RF-SN buried at the same depth, continuous data transmission at a rate of 224 bps with a 3% bit error rate (BER) is achieved when the EIRP of the transmitter is 23.6 dBm.

In this work, we provide an overview of the hardware architecture of wireless power transfer (WPT), RFID, and wireless information and power transfer (WIPT) systems. The historical milestones and structure differences among WPT, RFID, and WIPT are introduced.

The sustainable Internet of Things (IoT) is becoming a promising solution for the green living and smart industries. In this article, we investigate the practical issues in the radio energy harvesting and data communication systems through extensive field experiments. A number of important characteristics of energy harvesting circuits and communication modules have been studied, including the non-linear energy consumption of the communication system relative to the transmission power, the wake-up time associated with the payload, and the varying system power during consecutive packet transmissions. In order to improve the efficiency of energy harvest and energy utilization, we propose a new model to accurately describe the energy harvesting process and the power consumption for sustainable IoT devices. Experiments are performed using commercial IoT devices and RF energy harvesters to verify the accuracy of the proposed model. The experiment results show that the new model matches the performance of sustainable IoT devices very well in the real scenario.

In recent years, the radio frequency (RF) energy harvesting technique is considered as a favorable alternative to supply power for the next-generation wireless sensor networks. Due to the features of energy self-sustainability and long lifetime, the energy harvesting sensor network (RF-EHSN) becomes a promising solution to provide smart healthcare services. Nowadays, many energy harvesting based applications have been developed for monitoring the health status of human beings; how to benefit animals, however, has not yet drawn people's attention. This article explores the potential of applying RF-EHSNs to monitoring the health level of animals. The unique challenges and potential solutions at different layers of an RF-EHSN for animals' healthcare service are studied.

We propose a new energy harvesting strategy that uses a dedicated energy source (ES) to optimally replenish energy for radio frequency (RF) energy harvesting powered Internet of Things. Specifically, we develop a two-step dual tunnel energy requesting (DTER) strategy that minimizes the energy consumption on both the energy harvesting device and the ES. Besides the causality and capacity constraints that are investigated in the existing approaches, DTER also takes into account the overhead issue and the nonlinear charge characteristics of an energy storage component to make the proposed strategy practical. Both offline and online scenarios are considered in the second step of DTER. To solve the nonlinear optimization problem of the offline scenario, we convert the design of offline optimal energy requesting problem into a classic shortest path problem and thus a global optimal solution can be obtained through dynamic programming (DP) algorithms. The online suboptimal transmission strategy is developed as well. Simulation study verifies that the online strategy can achieve almost the same energy efficiency as the global optimal solution in the long term.

The transmission scheduling is a critical problem in radio frequency (RF) energy harvesting communications. Existing transmission strategies in an RF-based energy harvesting system is mainly based on a classic model, in which the data transmission is scheduled in a fixed feasible energy tunnel. In this paper, we re-examine the classic energy harvesting model and show through the theoretical analysis and experimental results that the bounds of feasible energy tunnel are dynamic, which can be affected by the transmission scheduling due to the impact of residual energy on the harvested one. To describe a practical energy harvesting process more accurately, a new model is proposed by adding a feedback loop that reflects the interplay between the energy harvest and the data transmission. Furthermore, to improve network performance, we revisit the design of an optimal transmission scheduling strategy based on the new model. To handle the challenge of the endless feedback loop in the new model, a recursive algorithm is developed. The simulation results reveal that the new transmission scheduling strategy can balance the efficiency of energy reception and energy utilization regardless of the length of energy packets, achieving improved throughput performance for wireless communications.