Search

The study aimed to radiographically assess the characteristics of pulp stones (PS) and pulp canal obliteration (PCO) in teeth and examined their associations with various dental parameters such as caries, restorations, periodontal status, and age. This cross-sectional observational study was conducted at the Faculty of Dentistry, King Abdulaziz University between September 2022, and May 2023, involved 101 patients exhibiting 402 teeth with PS or PCO. Data were collected from periapical and bitewing radiographs, and analyzed by two calibrated dentists. Multiple dental parameters were assessed, including caries level, presence and level of restorations, periodontal condition, and age of the patient. The study population consisted of 62 females and 39 males, with an age range of 18–65 years. Inter- and intra-examiner reliability were high (Kappa = 0.88 and 0.98 respectively). PS were more commonly found in molars (81.2%), while PCO were presented in only 115 teeth (23%). Age significantly affected the type of calcification (p < 0.001), with PS more common in the 20–30 age group and PCO more common in individuals over 40. Presence of caries was significantly associated with the type of calcification (p = 0.013), but restoration was not. The majority of teeth with PS (76%) or PCO (93%) had healthy periodontium. Around 40% of teeth with PCO showed signs of periapical changes, a finding significantly different from those with PS (p < 0.001). Pulp calcifications were significantly associated with various dental parameters, including caries presence, age, and periodontal status. The findings provide crucial insights into the epidemiology and aetiology of pulp calcifications. [ABSTRACT FROM AUTHOR]

Background: Pulp canal occlusion (PCO) increases the difficulty of root canal treatment as well as tooth preservation and restoration. This is the first case report of successful localization of a calcified root canal under the guidance of a dynamic navigation system (DNS) for complete root canal retreatment and aesthetic restoration after a failed attempt to locate the calcified root canal with a traditional dental operating microscope (DOM). Case presentation: The patient was scheduled for root canal treatment for a labially inclined maxillary central incisor and post-core crown restoration with resin veneers in another hospital, but the calcified root canal could not be located with a microscope, so the patient was referred to our department. Root canal retreatment was planned for tooth #8, and the calcified root canal of tooth #9 was planned to be located and dredged under the guidance of a DNS. We used a DNS for successful positioning and to complete the root canal retreatment operation in the following 4 steps: preoperative CBCT imaging, preoperative plan design, calibration and registration, and real-time dynamic navigation. Three months later, teeth #8 and #9 presented no clinical symptoms, after which the fiber post-cores and zirconia all-ceramic crown restorations were completed. At the 12-month follow-up visit, the patient continued to be symptom-free, and satisfied with the final aesthetic restoration. Conclusions: This case report suggests that DNS may be a promising technique with high accuracy and effectiveness to reduce the risk of iatrogenic errors and provide maximal preservation of dentin, when the traditional treatment of calcified root canals approaches failure (lateral perforation). [ABSTRACT FROM AUTHOR]

Abstract Background Pulp canal occlusion (PCO) increases the difficulty of root canal treatment as well as tooth preservation and restoration. This is the first case report of successful localization of a calcified root canal under the guidance of a dynamic navigation system (DNS) for complete root canal retreatment and aesthetic restoration after a failed attempt to locate the calcified root canal with a traditional dental operating microscope (DOM). Case presentation The patient was scheduled for root canal treatment for a labially inclined maxillary central incisor and post-core crown restoration with resin veneers in another hospital, but the calcified root canal could not be located with a microscope, so the patient was referred to our department. Root canal retreatment was planned for tooth #8, and the calcified root canal of tooth #9 was planned to be located and dredged under the guidance of a DNS. We used a DNS for successful positioning and to complete the root canal retreatment operation in the following 4 steps: preoperative CBCT imaging, preoperative plan design, calibration and registration, and real-time dynamic navigation. Three months later, teeth #8 and #9 presented no clinical symptoms, after which the fiber post-cores and zirconia all-ceramic crown restorations were completed. At the 12-month follow-up visit, the patient continued to be symptom­free, and satisfied with the final aesthetic restoration. Conclusions This case report suggests that DNS may be a promising technique with high accuracy and effectiveness to reduce the risk of iatrogenic errors and provide maximal preservation of dentin, when the traditional treatment of calcified root canals approaches failure (lateral perforation).

Background: With the increasing application of guided endodontics to treat complex root canal treatment, the entire process of root canal treatment has become more precise, reducing damage to tooth structure and improving success rates. However, due to the limitations of the operating space, the use of guided endodontic templates in posterior root canal treatment is less common. This study aims to compare the accuracy and reliability of selective laser melting (SLM) and traditional stereolithography etching (SLA) guided endodontic templates for posterior root canals, providing better treatment strategies for posterior root canal treatment. Methods: The teeth were randomly assigned to either SLM or SLA group. Preoperative cone-beam computed tomography (CBCT) and a three-dimensional (3D) scanner were used to establish the 3D root canal system and the accurate occlusal models of the teeth. The virtual access to the canal access was designed using Mimics 19.0 and 3-Matic 11.0. The endodontic access was performed based on either SLM or SLA templates. The accuracy of endodontic preparation was measured in three-dimensions by calculating deviations from planned accesses. The template height and tooth substance loss rates in each group were measured. Results: SLM-guided templates have a low average deviation at the entry point and apical portion of the bur of total posterior teeth (including premolars and molars) and individual molars (P < 0.05). Moreover, there was a significant difference in angular deviations and height of template in total posterior teeth and individual molars (P < 0.05). The mean substance loss rate of the SLA group was slightly greater than that of the SLM group, but the difference was not statistically (P > 0.05). Conclusions: SLM-guided endodontics provides a more predictable and precise location of root canal orifice for the treatment of posterior teeth. [ABSTRACT FROM AUTHOR]

The study aimed to radiographically assess the characteristics of pulp stones (PS) and pulp canal obliteration (PCO) in teeth and examined their associations with various dental parameters such as caries, restorations, periodontal status, and age. This cross-sectional observational study was conducted at the Faculty of Dentistry, King Abdulaziz University between September 2022, and May 2023, involved 101 patients exhibiting 402 teeth with PS or PCO. Data were collected from periapical and bitewing radiographs, and analyzed by two calibrated dentists. Multiple dental parameters were assessed, including caries level, presence and level of restorations, periodontal condition, and age of the patient. The study population consisted of 62 females and 39 males, with an age range of 18–65 years. Inter- and intra-examiner reliability were high (Kappa = 0.88 and 0.98 respectively). PS were more commonly found in molars (81.2%), while PCO were presented in only 115 teeth (23%). Age significantly affected the type of calcification (p

(1) Background: Pulp canal obliteration (PCO) is a common condition characterized by an abnormal dentinal apposition within the canal wall, which often rises as a consequence of dental trauma. In recent years, "guided endodontics" has offered a reliable and safer procedure for endodontic access in case of PCO. The present case report aims to introduce a new endodontic guided system with a sleeveless, open-frame titanium guide designed to reduce costs compared to traditional templates. (2) Methods: The patient is a 19-year-old female who was referred to a private clinic to treat a calcified and symptomatic tooth (3.3) with apical periodontitis. Following the first unsuccessful treatment attempt using the operating microscope, a three-dimensional cone beam computed tomography (CBCT) examination and an optical impression were performed in agreement with the patient. The Digital Imaging and Communications in Medicine (DICOM) and Standard Tessellation Language (STL) files were sent to the lab for the template packaging, and the patient was scheduled for a second appointment. The endodontic guide was accurately positioned, and shaping and filling were concluded with success. The canal was sealed with the single-cone technique and bioceramic sealer. (3) Results: The patient reported no significant post-operative symptoms. Notably, the treatment achieved total symptom resolution, as evidenced by radiographic assessments conducted 3 and 24 months post-treatment, confirming the procedure's success. (4) Conclusions: This innovative sleeveless, open-frame static titanium guide presents a promising advancement in guided endodontics for PCO treatment. The advantages include preserving healthy dental tissue, reduced chairside operating time, and cost savings compared to conventional templates. This approach holds promise for enhancing the quality and efficiency of endodontic procedures in cases of PCO. While the static guide holds promise, larger prospective studies are necessary to validate its efficacy, safety, and broader applicability in routine endodontic procedures. [ABSTRACT FROM AUTHOR]

This document provides a comprehensive overview of therapeutic solutions for the discoloration of calcified teeth based on CBCT diagnosis. It emphasizes the importance of compiling a correct case history and conducting a CBCT study to establish a diagnosis and determine the best treatment plan. The document discusses different types of tooth discoloration and their corresponding treatment options, such as dental bleaching and the use of ceramic veneers. It also highlights the importance of minimally invasive treatments and informed consent for patients. Additionally, the document provides a step-by-step clinical management guide for treating tooth discoloration caused by pulp canal obliteration (PCO). [Extracted from the article]

The gradual formation of hard tissue along the root canal walls is a natural process associated with aging, typically progressing slowly over time. In reaction to tooth wear, operative procedures, vital pulp treatments, or regenerative endodontic procedures, hard tissue may also accumulate within the pulp canal space at a slow rate. In certain cases, such as dental trauma, autotransplantation, or orthodontic treatment, this deposition of hard tissue can accelerate unexpectedly, resulting in rapid narrowing or complete closure of the root canal space. This situation is called calcific metamorphosis (CM), root canal calcification, or pulp canal obliteration (PCO). Performing conventional endodontic therapy on severely calcified canals presents significant challenges and increases the risk of procedural accidents. Calcified canals introduce such complexity that dedicated negotiation concepts and specially designed instruments have been developed to deal with the challenge. This article seeks to review the existing methods for effectively navigating calcified canals and to introduce the buckling resistance activation test (BRAT) technique. [ABSTRACT FROM AUTHOR]

Endodontic management of teeth afflicted with pulp canal obliteration faces a challenge due to the heightened risk of complications including excessive wear, perforation, and suboptimal chemomechanical preparation. This report aims to elucidate the clinical endodontic strategy employed in addressing pulp canal obliteration after a history of dental trauma and an associated periradicular lesion in an upper lateral incisor. A patient visited the dental emergency department with symptoms of apical swelling, acute persistent pain, and discoloration of tooth 22. Following comprehensive clinical evaluation and cone-beam computed tomography, the diagnosis of pulp canal obliteration involving the cervical and middle thirds of the tooth, alongside an acute periradicular abscess was established. Root canal was accessed using tomographic image planning, augmented by loupe magnification and ultrasonic instrumentation. Precise identification of the access cavity was radiographically confirmed, preceded by thorough irrigation with 2.5% sodium hypochlorite and subsequent cervical and middle third preparation. Verification of the working length by an electronic apex locator ensured precise apical preparation, followed by passive ultrasonic irrigation to optimize disinfection and to enhance penetrability of intracanal calcium hydroxide medication, administered for 15 days to eliminate microbial invasion. Upon resolution of symptoms, root canal obturation employing thermo- mechanical compaction and coronal sealing with composite resin was accomplished. Radiographic assessment after a one-year interval presented evidence of lesion regression and bone repair. Subsequent cone-beam computed tomography imaging at the three-year follow-up confirmed complete healing of the periradicular tissues, attesting to the efficacy of the endodontic intervention. [ABSTRACT FROM AUTHOR]

Abstract This systematic review aimed to answer the following question: What is the estimated prevalence of pulp canal obliteration in subtypes of traumatic dental injury (TDI) in deciduous and permanent teeth? The searches were conducted in PubMed, Embase, Scopus, Web of Science, LILACS, Grey Literature, and Google Scholar, and complemented by a manual search, until April 16th, 2023. Observational studies were selected based on population, exposure, and outcome (PEO) (P, deciduous or permanent teeth; E, TDI; O, pulp canal obliteration). Two reviewers (kappa 0.90) applied the eligibility criteria, extracted qualitative data, and assessed the methodological quality using the Newcastle-Ottawa tool. A meta-analysis was performed using MedCalc 17.2. Thirty-four articles were selected after screening. The methodological quality was moderate to high. The estimated prevalence of pulp canal obliteration was 27.6% (95%CI: 18.7–37.7) and 21.9% (95%CI:16.0–28.4), for permanent and deciduous teeth, respectively. Considering the TDI subtypes, the prevalence of pulp canal obliteration was higher in root fractures of the permanent teeth (78.6 %, 95%CI: 62.8–90.9) and lateral luxation injuries in deciduous teeth (29.4%, 95%CI:19.1–41.0). Our review of 34 articles of moderate and high methodological quality found that the prevalence of pulpal canal obliteration ranges from 21.9% to 27.6%. Pulp canal obliteration was most frequently detected following lateral luxation injuries of the deciduous teeth and root fractures of the permanent teeth (PROSPERO CRD42020179438).

Background With the increasing application of guided endodontics to treat complex root canal treatment, the entire process of root canal treatment has become more precise, reducing damage to tooth structure and improving success rates. However, due to the limitations of the operating space, the use of guided endodontic templates in posterior root canal treatment is less common. This study aims to compare the accuracy and reliability of selective laser melting (SLM) and traditional stereolithography etching (SLA) guided endodontic templates for posterior root canals, providing better treatment strategies for posterior root canal treatment. Methods The teeth were randomly assigned to either SLM or SLA group. Preoperative cone-beam computed tomography (CBCT) and a three-dimensional (3D) scanner were used to establish the 3D root canal system and the accurate occlusal models of the teeth. The virtual access to the canal access was designed using Mimics 19.0 and 3-Matic 11.0. The endodontic access was performed based on either SLM or SLA templates. The accuracy of endodontic preparation was measured in three-dimensions by calculating deviations from planned accesses. The template height and tooth substance loss rates in each group were measured. Results SLM-guided templates have a low average deviation at the entry point and apical portion of the bur of total posterior teeth (including premolars and molars) and individual molars (P < 0.05). Moreover, there was a significant difference in angular deviations and height of template in total posterior teeth and individual molars (P < 0.05). The mean substance loss rate of the SLA group was slightly greater than that of the SLM group, but the difference was not statistically (P > 0.05). Conclusions SLM-guided endodontics provides a more predictable and precise location of root canal orifice for the treatment of posterior teeth.

Nonsurgical endodontic teeth treatment with severe pulp canal obliteration poses challenges, primarily locating canals. By combining 3-dimensional reconstruction and spatial location registration, the dynamic navigation technique uses an optical tracking system to guide the clinician to drill in real time according to the predesigned path until access to the canal is established. Several in vitro studies and case reports have shown that calcified canal location with dynamic navigation system (DNS) is more accurate and efficient, yet the technique has limitations. In 4 cases with 7 teeth, this work presents manipulation process and clinical outcomes of DNS helping in calcified canal location. We performed handpiece adaptation and elucidated the failure to locate the canals with DNS in 2 teeth, resulting in canal geometry alteration and canal path deviation. Subsequently, the more experienced endodontist located the canals by combining cone-beam computed tomographic imaging and dental operating microscopy. All patients were completely asymptomatic after treatment. At the 1-year follow-up visit, the bone healing of periapical lesions progressed well according to the periapical radiography or cone-beam computed tomographic imaging. These findings indicate that DNS is a promising technique for locating calcified canals; however, it needs to be refined before clinical use. [ABSTRACT FROM AUTHOR]

Abstract Background To compare the outcomes of conventional access cavity preparation (CONV) versus guided endodontics (GE) for access cavity preparation in anterior teeth with pulp canal calcification (PCC) regarding root canal detection, substance loss, procedural time, and need for additional radiographs. Methods Extracted, sound human teeth with PCC (n = 108) were matched in pairs, divided into two groups and used to produce 18 models. An independent endodontist and a general dentist performed access cavity preparation under simulated clinical conditions on nine models each (54 teeth). The endodontist used the conventional technique and the general dentist GE. Time needed to access the root canals and the number of additional radiographs were recorded. Pre- and postoperative cone-beam computed tomography scans were obtained to measure substance loss. Statistical significance was tested by examining the overlap of 95% confidence intervals (CIs) between the groups. Results All root canals were successfully accessed by both methods. There were no significant differences in substance loss (CI: CONV 15.9–29.6 mm3 vs. GE 17.6-27.5mm3) or procedural time (CI: CONV 163.3-248.5 s vs. GE 231.9-326.8 s). However, 31 additional radiographs were required for GE compared to none for CONV. Conclusions For access cavity preparation in teeth with PCC, both CONV by a specialist and GE by a general dentist produce good results in terms of substance loss and time requirements.

Background: To compare the outcomes of conventional access cavity preparation (CONV) versus guided endodontics (GE) for access cavity preparation in anterior teeth with pulp canal calcification (PCC) regarding root canal detection, substance loss, procedural time, and need for additional radiographs. Methods: Extracted, sound human teeth with PCC (n = 108) were matched in pairs, divided into two groups and used to produce 18 models. An independent endodontist and a general dentist performed access cavity preparation under simulated clinical conditions on nine models each (54 teeth). The endodontist used the conventional technique and the general dentist GE. Time needed to access the root canals and the number of additional radiographs were recorded. Pre- and postoperative cone-beam computed tomography scans were obtained to measure substance loss. Statistical significance was tested by examining the overlap of 95% confidence intervals (CIs) between the groups. Results: All root canals were successfully accessed by both methods. There were no significant differences in substance loss (CI: CONV 15.9–29.6 mm3 vs. GE 17.6-27.5mm3) or procedural time (CI: CONV 163.3-248.5 s vs. GE 231.9-326.8 s). However, 31 additional radiographs were required for GE compared to none for CONV. Conclusions: For access cavity preparation in teeth with PCC, both CONV by a specialist and GE by a general dentist produce good results in terms of substance loss and time requirements. [ABSTRACT FROM AUTHOR]

(1) Background: Pulp canal obliteration (PCO) is a common condition characterized by an abnormal dentinal apposition within the canal wall, which often rises as a consequence of dental trauma. In recent years, “guided endodontics” has offered a reliable and safer procedure for endodontic access in case of PCO. The present case report aims to introduce a new endodontic guided system with a sleeveless, open-frame titanium guide designed to reduce costs compared to traditional templates. (2) Methods: The patient is a 19-year-old female who was referred to a private clinic to treat a calcified and symptomatic tooth (3.3) with apical periodontitis. Following the first unsuccessful treatment attempt using the operating microscope, a three-dimensional cone beam computed tomography (CBCT) examination and an optical impression were performed in agreement with the patient. The Digital Imaging and Communications in Medicine (DICOM) and Standard Tessellation Language (STL) files were sent to the lab for the template packaging, and the patient was scheduled for a second appointment. The endodontic guide was accurately positioned, and shaping and filling were concluded with success. The canal was sealed with the single-cone technique and bioceramic sealer. (3) Results: The patient reported no significant post-operative symptoms. Notably, the treatment achieved total symptom resolution, as evidenced by radiographic assessments conducted 3 and 24 months post-treatment, confirming the procedure’s success. (4) Conclusions: This innovative sleeveless, open-frame static titanium guide presents a promising advancement in guided endodontics for PCO treatment. The advantages include preserving healthy dental tissue, reduced chairside operating time, and cost savings compared to conventional templates. This approach holds promise for enhancing the quality and efficiency of endodontic procedures in cases of PCO. While the static guide holds promise, larger prospective studies are necessary to validate its efficacy, safety, and broader applicability in routine endodontic procedures.

This study aimed to evaluate the precision of the guided endodontic technique applied to calcified canals in anterior teeth in relation to demographic and dental variables. The present observational study was conducted during the period 2020–2021. The patients were consecutive referrals at the Department of Endodontics and Conservative Dentistry of the University Hospital of Siena. The guided endodontics protocol was applied using 0.75 mm diameter burs for the lower teeth and 0.90 mm for the upper teeth. The inclusion criteria were as follows: (i) teeth with pulp canal obliteration (PCO) associated with a periapical lesion (periapical index (PAI) ≥ 2); (ii) teeth with PCO that require the placement of a root canal post for the execution of a prosthetic treatment; (iii) teeth in which surgical treatment was not justified. Socio-demographic characteristics of the patients were recorded and related to the drill path accuracy through the guide in the calcified endodontic canal, evaluated through a radiographic analysis, and classified as optimal (in the center of the root canal) and acceptable (deviated peripherally/tangentially). A logistic regression model was built to predict the factors that influence the poor precision of the technique. Seventeen patients (mean age 48 years) with eighteen calcified single-rooted teeth were enrolled. All teeth were associated with periapical lesions with PAI scores from 2 to 5 (mean PAI: 3.055). From the model, it is evident that the presence of a calcification affecting the apical area of the root increases the probability of being off-center with the bur by about 15 times. In addition, a previous attempt at endodontic treatment and the position in the lower arch increases the probability of non-centrality of the drill, although in a non-statistically significant way. In any of the analyzed cases, the guided endodontic technique applied to PCO did not determine the presence of iatrogenic errors, such as perforations. However, the apical localization of the obliteration increases the probability of being off-center with the drill during the instrumentation phase by about 15 times. [ABSTRACT FROM AUTHOR]

Pulp canal obliteration (PCO) is a significant complication in endodontics that can occur due to various factors. Cone beam computed tomography (CBCT) is a useful diagnostic tool for identifying root canal anatomy and variations, and guided endodontics is emerging as an alternative treatment solution for teeth with partially or entirely obliterated pulpal canals. However, the accuracy of CBCT-guided 3D-printed guides on different materials and layer thicknesses is not well understood. Therefore, this study aimed to evaluate the accuracy of guides prepared using CBCT images on 3D-printed teeth with stereolithography (SLA) using three different materials and two different layer thicknesses. This study found that 3D-printed guides were accurate and reliable for accessing 3D-manufactured obliterated teeth and reaching the apical area. No significant differences in distance or angle measurements were found when different guide materials were used, suggesting that materials can be selected based on availability and cost. These findings contribute to the knowledge base regarding the effectiveness of 3D printing technology in guided endodontics and can help to identify the most suitable materials and techniques for this application. [ABSTRACT FROM AUTHOR]

(1) Introduction: Deciduous traumatic dental injuries pose a serious global health concern. Root fractures show an incidence rate of approximately 2%; however, the literature is limited regarding the appropriate treatment and prognosis of affected teeth. This retrospective study aims to analyze the long-term outcomes of orthodontic splinting using brackets compared with composite resin-only splinting in two homogeneous samples affected by root fractures. The study also examines the onset and patterns of root resorption. (2) Methods: The first group included 25 patients with 27 deciduous upper incisors affected by root fracture; Group 2 consisted of 35 patients with 38 root fractures of maxillary deciduous teeth. The categorical data for both groups were analyzed using the chi-squared homogeneity test. Age groups were compared using the Mann–Whitney U test; p < 0.005 was considered statistically significant. (3) Results: In both groups, the male gender predominated similarly. In Group 1, early decidual loss occurred in 16% of cases, whereas in Group 2 it occurred in 51% of cases. Pulp canal obliteration was observed in 68% of deciduous teeth in Group 1, compared with 30% in Group 2. No complications affecting permanent teeth were noted in Group 1; in Group 2, 29% developed enamel dysplasia and 26% experienced delayed eruption, with statistically significant differences in these proportions. Apical fragment resorption was observed in 92% of cases in Group 1 and 30% in Group 2. (4) Conclusions: The treatment of deciduous tooth root fractures using orthodontic splints can yield significant benefits, such as reduction of early tooth loss. Furthermore, the study confirms that early resorption of the distal fragment of fractured roots is a common physiological phenomenon in primary teeth and typically occurs within a year following trauma. [ABSTRACT FROM AUTHOR]

Background/Aims: Calcium silicate cements have been widely used for pulpotomies in immature permanent teeth with complicated crown fractures due to their superior properties. However, few studies have evaluated the long‐term outcomes of white mineral trioxide aggregate (WMTA) and iRoot BP Plus for partial pulpotomies. The aim of this study was to investigate the long‐term clinical and radiographic outcomes of WMTA and iRoot BP Plus for partial pulpotomies in immature permanent incisors with complicated crown fractures. Materials and Methods: Children who had partial pulpotomies of immature permanent incisors with complicated crown fractures using WMTA or iRoot BP Plus as capping agents were enrolled. Eighty immature permanent incisors in 68 children (aged 8–13 years) were included. They were divided into two groups (WMTA and iRoot BP Plus) according to the capping agents. Clinical and radiographic information was collected during a 5‐year follow‐up period. Study data were analyzed using Chi‐square tests or Fisher exact tests. Results: The clinical and radiographic success rates in the WMTA (n = 36) and iRoot BP Plus groups (n = 44) were 94.4% versus 97.7% and 88.9% versus 97.7%, respectively (both p <.05). The average observation period was 74.5 ± 13.2 months and 61.9 ± 1.6 months in the WMTA and iRoot BP Plus groups, respectively (p <.01). Five cases presented with periapical radiolucencies. The WMTA group had four cases of pulp canal calcification (11.1%), while the iRoot BP Plus group had two cases (4.6%). There was crown discolouration in all cases in the WMTA group, but none in the iRoot BP Plus group. Conclusion: Both WMTA and iRoot BP Plus had favorable outcomes in promoting physiological development and maintaining the basic functions of immature permanent incisors with complicated crown fractures. As a partial pulpotomy material, iRoot BP Plus may be more suitable for the esthetic zone than WMTA. [ABSTRACT FROM AUTHOR]

Abstract Background The calcification of the tooth pulp is a pathological condition that occurs in response to various factors. A uncommon haematological condition known as paroxysmal nocturnal haemoglobinuria (PNH) is characterized by bouts of haemolysis, and it requires long-term use of glucocorticoids (GCs). Case presentation A female patient who was diagnosed with PNH and had a history of long-term use of GCs came to our department for root canal therapy (RCT) for teeth 25, 26, and 27. The radiographs showed generalized pulp canal obliteration (PCO) in most of the patients. None of these teeth (25, 26, or 27) were sensitive to percussion, and they did not respond to thermal or electrical sensitivity tests. A diagnose of pulp necrosis was made for these teeth. RCT was carried out with the help of an oral microscope, and then a prosthodontic procedure was created for the teeth. Conclusions Based on the patient’s long history use of GCs and a series of related studies, we conclude that the long-term usage of GCs contributes significantly to the onset of PCO.

Management of pulp canal obliteration and apicoectomy procedures with an endodontic guide is presented in multiple cases. This case report series highlights a cost-effective guide construction approach using an open-source cone-beam computed tomography software, ITK-snap. A simple soft template was used as a guide for successful access of calcified canals and osteotomy preparation with reduction of unwarranted adjacent tissue damage.

The long-term prognosis of previously traumatized immature permanent teeth treated with guided endodontic repair is well documented, but little is known about how these teeth respond to further traumatic injury after treatment. This case report presents the 10-year clinical and radiographic findings of two patients with traumatized maxillary incisors who underwent guided endodontic repair treatment and sustained two further traumatic injuries. Three crown-fractured maxillary central incisors with pulp necrosis were treated with a protocol that used 2.5% NaOCl irrigation, 3-4 weeks medication with calcium hydroxide or ciprofloxacin-metronidazole paste, induction of apical bleeding, and coronal sealing with mineral trioxide aggregate. One tooth sustained subluxation and a crown fracture after 20 months and 7 years, respectively. Two other teeth had a luxation injury at 9 months and subluxation 6.5 years after the repair treatment. One subluxated and one luxated tooth remained free of symptoms for 10 years with radiographic evidence of progressive root canal calcification, while the other luxated incisor required root canal treatment after 7.5 years. Although teeth treated with the so-called "regenerative" endodontic techniques do not possess true pulp tissue, the reparative tissue may respond to traumatic injuries in a similar manner to teeth with normal pulps. [ABSTRACT FROM AUTHOR]

Endodontic treatment of calcified canals presents a major challenge because of the high incidence of complications, such as perforation, canal geometry alteration, and loss of dental hard tissue. The dynamic navigation technique uses an optical tracking system for real-time navigation to guide the operator to drill according to the preoperative plan and obtain access to the calcified canals. This article describes in detail the use, advantages, disadvantages, and limitations of a novel dynamic navigation system in 2 cases with severely calcified canals. The findings in these cases demonstrate that dynamic navigation system is a promising technique for locating calcified root canals. [ABSTRACT FROM AUTHOR]

Luxation injuries and other stimuli may lead to a pulp canal obliteration (PCO). Even though the apposition of tertiary dentine is a sign of a vital pulp, in some cases root canal treatment is indicated in the long term due to apical periodontitis or pulpitis. Depending on the extent of PCO, root canal treatment may be challenging even for experienced and well‐equipped endodontic specialists. The 'guided endodontics' (GE) technique was introduced 6 years ago as an alternative to conventional access cavity preparation for teeth with PCO and apical pathosis or irreversible pulpitis. Using three‐dimensional radiological imaging such as cone‐beam computed tomography and a digital surface scan, an optimal access to the orifice of the calcified root canal can be planned virtually with appropriate software. GE is implemented either with the help of templates analogous to guided implantology (= static navigation) or by means of dynamic navigation based on a camera‐marker system. GE has emerged as a field of research in the last 6 years with very promising laboratory‐based results regarding the accuracy of guided endodontic access cavities for both static and dynamic navigation. Clinical implementation seems to provide favourable results, but the evidence is mainly based on numerous case reports and a few case series. This narrative review aims to provide an update on the present status of GE and to identify relevant research areas that could contribute to further improvements of this technique. [ABSTRACT FROM AUTHOR]

Management of pulp canal obliteration and apicoectomy procedures with an endodontic guide is presented in multiple cases. This case report series highlights a cost-effective guide construction approach using an open-source cone-beam computed tomography software, ITK-snap. A simple soft template was used as a guide for successful access of calcified canals and osteotomy preparation with reduction of unwarranted adjacent tissue damage. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the precision of the guided endodontic technique applied to calcified canals in anterior teeth in relation to demographic and dental variables. The present observational study was conducted during the period 2020–2021. The patients were consecutive referrals at the Department of Endodontics and Conservative Dentistry of the University Hospital of Siena. The guided endodontics protocol was applied using 0.75 mm diameter burs for the lower teeth and 0.90 mm for the upper teeth. The inclusion criteria were as follows: (i) teeth with pulp canal obliteration (PCO) associated with a periapical lesion (periapical index (PAI) ≥ 2); (ii) teeth with PCO that require the placement of a root canal post for the execution of a prosthetic treatment; (iii) teeth in which surgical treatment was not justified. Socio-demographic characteristics of the patients were recorded and related to the drill path accuracy through the guide in the calcified endodontic canal, evaluated through a radiographic analysis, and classified as optimal (in the center of the root canal) and acceptable (deviated peripherally/tangentially). A logistic regression model was built to predict the factors that influence the poor precision of the technique. Seventeen patients (mean age 48 years) with eighteen calcified single-rooted teeth were enrolled. All teeth were associated with periapical lesions with PAI scores from 2 to 5 (mean PAI: 3.055). From the model, it is evident that the presence of a calcification affecting the apical area of the root increases the probability of being off-center with the bur by about 15 times. In addition, a previous attempt at endodontic treatment and the position in the lower arch increases the probability of non-centrality of the drill, although in a non-statistically significant way. In any of the analyzed cases, the guided endodontic technique applied to PCO did not determine the presence of iatrogenic errors, such as perforations. However, the apical localization of the obliteration increases the probability of being off-center with the drill during the instrumentation phase by about 15 times.

Background: Endodontic treatment is a major challenge when the root canals are partially obliterated. This can occur as a result of multiple causes that stimulate pulp canal obliteration (PCO) such as physiological processes, caries, extensive restorations, coronal wear or dental trauma. Case description: Static-guided endodontic techniques have been reported as helpful in such cases, however, the interocclusal space required for the use of templates may contraindicate the use of this technique in posterior teeth. Dynamic navigation permits the trajectory of the instruments to be tracked in real time, allowing computer-guided endodontic accesses to be executed without the need for templates that may require wider interocclusal space, which can be beneficial for the treatment of posterior teeth. Practical implications: This article reports a case in which the distobuccal canal of a maxillary second molar, which was obliterated up to the middle third of the root, was precisely and conservatively located with dynamic navigation. [ABSTRACT FROM AUTHOR]

Background: The calcification of the tooth pulp is a pathological condition that occurs in response to various factors. A uncommon haematological condition known as paroxysmal nocturnal haemoglobinuria (PNH) is characterized by bouts of haemolysis, and it requires long-term use of glucocorticoids (GCs). Case presentation: A female patient who was diagnosed with PNH and had a history of long-term use of GCs came to our department for root canal therapy (RCT) for teeth 25, 26, and 27. The radiographs showed generalized pulp canal obliteration (PCO) in most of the patients. None of these teeth (25, 26, or 27) were sensitive to percussion, and they did not respond to thermal or electrical sensitivity tests. A diagnose of pulp necrosis was made for these teeth. RCT was carried out with the help of an oral microscope, and then a prosthodontic procedure was created for the teeth. Conclusions: Based on the patient's long history use of GCs and a series of related studies, we conclude that the long-term usage of GCs contributes significantly to the onset of PCO. [ABSTRACT FROM AUTHOR]

Aim: To describe a novel surgical method (crown rotation surgery) to manage inversely impacted central incisors with immature roots. Methodology: Two young patients each presented with an inversely impacted maxillary central incisor. To protect the apical tissues, the two impacted incisors were rotated downwards to a relatively normal position without extraction from their bony sockets. Results: After crown rotation surgery, spontaneous eruption, continuous root development, and periodontal healing of the rotated incisors were observed. The pulp retained vitality and blood flow was normal. Moreover, there were no obvious signs of pulp canal obliteration (PCO), as indicated by Cone Beam Computed Tomography (CBCT) imaging. Conclusions: By optimising protection of the vital pulp and apical tissues, crown rotation surgery represents a minimally invasive, conservative, and practical surgical technique for treating inversely impacted incisors with developing roots. In contrast to existing surgical methods, crown rotation surgery may avoid certain complications, including PCO and abnormal or arrested root development. Key learning points: By optimizing protection of the vital pulp and apical tissues, crown rotation surgery represents a minimally invasive, conservative and practical surgical technique for treating inversely impacted incisors with developing roots.In contrast to existing surgical methods, crown rotation surgery may avoid certain complications, including PCO and abnormal or arrested root development. [ABSTRACT FROM AUTHOR]

Pulp canal obliteration (PCO) is a significant complication in endodontics that can occur due to various factors. Cone beam computed tomography (CBCT) is a useful diagnostic tool for identifying root canal anatomy and variations, and guided endodontics is emerging as an alternative treatment solution for teeth with partially or entirely obliterated pulpal canals. However, the accuracy of CBCT-guided 3D-printed guides on different materials and layer thicknesses is not well understood. Therefore, this study aimed to evaluate the accuracy of guides prepared using CBCT images on 3D-printed teeth with stereolithography (SLA) using three different materials and two different layer thicknesses. This study found that 3D-printed guides were accurate and reliable for accessing 3D-manufactured obliterated teeth and reaching the apical area. No significant differences in distance or angle measurements were found when different guide materials were used, suggesting that materials can be selected based on availability and cost. These findings contribute to the knowledge base regarding the effectiveness of 3D printing technology in guided endodontics and can help to identify the most suitable materials and techniques for this application.

Objective: The objective of this systematic review was to comprehensively assess the literature regarding the applications, accuracy, advantages and limitations of dynamic navigation in endodontics. Methods: Case reports and laboratory studies in the English language, which used the Dynamic Navigation System (DNS) for endodontic application and assessed the accuracy of treatment, the time required for treatment and iatrogenic errors were included. PubMed, Scopus, Embase and Web of Science were searched for eligible articles (up to July 2021). Additional hand searching of four peer-reviewed endodontic journals and a grey literature search were also carried out. A risk of bias assessment was done using the Joanna Briggs Institute (JBI) critical appraisal checklists. Data were extracted based on endodontic application of DNS, tooth type, DNS brand, accuracy, iatrogenic errors, and time taken, followed by qualitative analysis. Results: Fourteen articles (three case reports and eleven in-vitro studies) met the eligibility criteria and were included. The quality assessment revealed a low risk of bias, with mean scores of 83.34% for case reports and 84.09% for in-vitro studies. DNS was used for various clinical applications such as access cavity preparation, pulp canal obliteration, endodontic retreatment and microsurgery. The DNS brands used were Navident, Xguide, ImplaNav, and DENACAM. Due to the nature of the component studies, meta-analysis was not possible. Conclusion: Challenging clinical situations like pulp canal obliteration, conservative access preparation, endodontic retreatment and microsurgery can be managed efficiently with fewer iatrogenic errors in a shorter time using DNS. However, this systematic review's evidence is low since the included articles are either case reports or in-vitro studies. Clinical studies are needed to test DNS efficacy among operators, including those who are less proficient and compare the accuracy of currently available systems. [ABSTRACT FROM AUTHOR]

Pulp canal obliteration (PCO) is a challenging clinical scenario in which canals must be located in progressively narrowing roots. Recently, proof of concept papers have, in parallel, introduced the combination of cone-beam computed tomography and surface scans for the construction of guides to pilot the negotiation and preparation of partially or completely obliterated pulp chambers and canals in anterior and posterior teeth. Authors' purpose is to describe the treatment approach for teeth with PCO and previous iatrogenic deviation using guided endodontic technique. The clinical cases reported here show that technological evolutions should make guided endodontic procedures more widespread because their execution is relatively fast and safe even in the cases of root canal deviation. Treatment of teeth with pulp canal obliteration with deviations or perforation may be more effective with designed 3D printed access guides that seems to be a safe and clinically feasible method to locate root canals. [ABSTRACT FROM AUTHOR]

Background: Guided Endodontics is suggested as a reliable method for management of teeth with pulp canal obliteration (PCO). The guide used for this usually involves multiple teeth to gain stability but is bulky. It is therefore suboptimal to be used along with rubber dam. Aim: To describe the use of a minimized single-tooth guide template in three patients with radiographic evidence of PCO. Design: The template was designed and fabricated using the cone-beam computed tomography (CBCT) scan and a surface scan image of the involved teeth. In all three patients, the root canals were successfully negotiated within 15 minutes, with the template involving only the tooth in focus or with neighboring half of the teeth. The operator stabilized the template if required. Conclusions: This case series shows clinically that successful outcome can be obtained during guided endodontics with the use of a single-tooth template in previously traumatized anterior teeth with PCO.

Endodontic treatment in severely calcified canals is always a challenging task because it can result in accidents such as deviations or perforations. Recently, guided endodontics has become an alternative approach for pulp canal calcification, facilitating the location of root canals more predictably through the combined use of cone-beam computed tomographic imaging, oral scanning, and endodontic access guides. Although several reports have shown that guided endodontics is safer, faster and can be performed without an operating microscope and by less experienced operators, the technique has limitations, and iatrogenesis may occur. This article describes the limitations of static-guided endodontics and possible causes of failures. In the present case, not fixing the guide to the bone and inaccuracies generated by manually performing mesh merger software led to root perforation. Endodontic microsurgery was effective in resolving this case and should be considered the treatment of choice when guided endodontics cannot be used safely or when it fails. [ABSTRACT FROM AUTHOR]

Copyright of West China Journal of Stomatology is the property of Sichuan University, West China College of Stomatology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background and Objectives: This systematic review aimed to assess the literature focusing on the clinical management of traumatized teeth with Pulp Canal Obliteration (PCO) and propose an updated clinical decision-making algorithm. The present review follows the PRISMA guidelines and was registered on PROSPERO database (CRD42020200656). Materials and Methods: An electronic search strategy was performed in Pubmed, EBSCOhost and LILACS from inception to March 2021. Only anterior permanent teeth with PCO due to dental trauma were included. Regarding clinical approaches, only teeth managed with a “watchful waiting” approach, tooth bleaching or root canal treatment (RCT) were included. Quality assessment was performed using the JBI Critical Appraisal Tool for Case Reports. Results: Twenty case reports were selected, resulting in a total of 27 patients. The number of traumatized teeth diagnosed with PCO was 33. The “watchful waiting” approach was the most implemented clinical strategy. Discolored non-symptomatic PCO teeth were mostly managed with external bleaching. The prevalence of pulp necrosis (PN) was 36.4%. For teeth diagnosed with PN, non-surgical RCT was performed in 10 teeth and surgical RCT in one tooth. Guided endodontic technique was performed in six of those teeth. Conclusions: For discolored non-symptomatic PCO teeth, external bleaching is advocated and the RCT approach should not be implemented as a preventive intervention strategy. Symptomatic PCO teeth should follow regular endodontic treatment pathways. Clinical approach of teeth with PCO should follow a decision making algorithm incorporating clinical and radiographic signs and patient-reported symptoms. [ABSTRACT FROM AUTHOR]

Background: Guided Endodontics is suggested as a reliable method for management of teeth with pulp canal obliteration (PCO). The guide used for this usually involves multiple teeth to gain stability but is bulky. It is therefore suboptimal to be used along with rubber dam.Aim: To describe the use of a minimized single-tooth guide template in three patients with radiographic evidence of PCO.Design: The template was designed and fabricated using the cone-beam computed tomography (CBCT) scan and a surface scan image of the involved teeth. In all three patients, the root canals were successfully negotiated within 15 minutes, with the template involving only the tooth in focus or with neighboring half of the teeth. The operator stabilized the template if required.Conclusions: This case series shows clinically that successful outcome can be obtained during guided endodontics with the use of a single-tooth template in previously traumatized anterior teeth with PCO. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Ege University School of Dentistry / Ege Üniversitesi Dis Hekimligi Fakültesi Dergisi is the property of Ege University Faculty of Dentistry and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In a general dental practice and in dental institution, traumatic emergency cases report for dental and orofacial injuries in children. This case report discusses a trauma case involving luxation of maxillary incisor tooth, treatment has been done and review of literature in regard to this. [ABSTRACT FROM AUTHOR]

Background/aim: Tooth displacement during avulsion causes total rupture of the pulp's neurovascular supply. Revascularization and pulp healing may occur in immature teeth, which gives rise to the recommendation that root canal treatment may not be required. The aim of this study was to evaluate the prognostic factors for the pulp's response after replantation of young permanent teeth.Methods: Records from 117 patients with 133 replanted permanent immature teeth were reviewed, and pulp outcomes were classified as healing (hard tissue deposition on the dentinal walls followed by narrowing of the pulp lumen or ingrowth of bone-like tissue inside the pulp canal) or non-healing (pulp necrosis with infection). The effect of clinical and demographic co-variates on the hazards of both outcomes was assessed performing a competing risk model.Results: Pulp necrosis with infection was diagnosed in 78.2% of the teeth, and healing was observed in 12.8% of the teeth. A total of 12 teeth (9.0%) were censored due to prophylactic removal of the pulp or severe external root resorption caused by eruption of adjacent canines. The cs-Cox model demonstrated that the hazards of pulp healing increased in teeth with extra-alveolar periods <15 min (csHR: 7.83, 95% CI 1.76-34.80, p = .01), while the hazards of pulp necrosis with infection decreased (csHR: 0.31, 95% CI: 0.10-0.92, p = .04). Teeth replanted with Moorrees' stages 4 and 5 of root development had higher hazards of pulp necrosis with infection than teeth with stage 2 of root development (csHR: 2.23, 95% CI 1.11-4.50, p = .03; csHR: 2.89, 95% CI: 1.40-5.95; p = .01).Conclusions: Pulp healing rarely occurred after replantation of young permanent teeth being associated with short extra-alveolar periods <15 min. Early stages of root development decreased the hazards of pulp necrosis with infection. [ABSTRACT FROM AUTHOR]

This case report demonstrates the possibility of functional and aesthetic rehabilitation using an interdisciplinary approach in a child following avulsion of a tooth. Autotransplantation after the development of calcific metamorphosis of the pulp and acute apical periodontitis provided satisfactory repair after root canal treatment. A 7-year-old white boy avulsed the right maxillary central incisor (tooth 11). The extra-alveolar time exceeded 60 minutes, and this triggered external replacement resorption of the avulsed tooth. At 11 years of age, the child underwent tooth autotransplantation. After 4 years of follow-up, intraoral clinical and radiographic examination led to the diagnosis of calcific metamorphosis of the pulp and acute apical periodontitis. The patient had minimally invasive root canal treatment, orthodontic treatment and esthetic rehabilitation with a porcelain crown. Control periapical radiography and tomography of the autotransplanted tooth after 7 years revealed bone repair in the periapical region. This case report indicates that tooth autotransplantation can be used to replace anterior teeth after avulsion followed by replacement resorption. Interdisciplinary management helped to maintain the esthetics and function of the rehabilitated area. [ABSTRACT FROM AUTHOR]

Background/Aims: Traumatic dental injuries (TDI) occur frequently and may result in pulp sequelae. This includes pulp necrosis with infection, pulp canal obliteration and root resorption. The aim of this study was to assess the prevalence and risk factors of pulp sequelae after TDI among Norwegian adolescents. Material and methods: A retrospective longitudinal study, including historical clinical data, was conducted with 16‐year‐old pupils in western Norway. All first‐grade pupils, born in 1997 (n = 5184), attending public high schools, were invited to participate and to respond to an electronically administered closed‐ended questionnaire (response rate 39.6%, n = 2055). Consent was given to access the dental records in the Public Dental Health Service in Hordaland, where information regarding TDI (diagnosis and treatment) and radiographs were interpreted. Only TDIs to anterior teeth were recorded (canine to canine in the maxilla and mandible). Outcome variables of TDI were registered and analysed using logistic regression, Kaplan‐Meier survival estimates and log‐rank test. Results: The prevalence of TDI in the sample population was 16.4% (338 pupils), with a total of 637 teeth involved. The number of included teeth for analysis was 571 (90.5%). The prevalence of pulp necrosis with infection was 7.5%. Moderate and severe TDI was associated with a higher frequency of pulp necrosis with infection. Pulp canal obliteration and root resorption were found in 2.8% and 2.3% of teeth with TDI, respectively. Dental hard tissue injuries were more prone to the development of pulp necrosis than luxation injuries and combination injuries. The relationship between root development stage and development of pulp necrosis with infection was not statistically significant. Conclusions: Occurrence of different pulp sequelae among teeth affected with TDI was low. Moderate and severe TDI were more at risk of developing pulpal complications and hard tissue injuries were at higher risk of developing pulp necrosis with infection. [ABSTRACT FROM AUTHOR]

The treatment of calcified root canals is challenging in endodontic practice. A 63-year-old man was referred to the postgraduate endodontic clinic at the University of Maryland School of Dentistry, Baltimore, MD, for the treatment of tooth #3. Because of the patient's history of head and neck radiation and the high risk of developing osteoradionecrosis, a nonsurgical endodontic approach was found to be the most reasonable treatment option despite the questionable prognosis of the tooth. During the endodontic treatment, the distobuccal canal appeared to be partially calcified and was not possible to be located freehand even with use of the dental operating microscope and cone-beam computed tomographic approximated approach. Therefore, the dynamic navigation system using the X-Guide system (X-Nav technologies, LLC, Lansdale, PA) was used, which allowed for the successful location of the canal. Conventional endodontic treatment was completed following standardized instrumentation, irrigation, and obturation. Details on how to use the dynamic navigation system are described including its advantages, disadvantages, and limitations. [ABSTRACT FROM AUTHOR]

Pulp canal calcification is 1 of the possible outcomes after certain types of dental trauma. This can make endodontic treatment more challenging should it become necessary. Because of the increased degree of difficulty, sometimes procedural incidents do occur during root canal treatment. This case report demonstrates an unusual clinical presentation of a root perforation and missed canal, which had undergone calcification as a result of trauma some years earlier. A contemporary approach to treatment involved a combination of treating the biological complication of the calcified canal combined with surgical repair of the iatrogenic complication of a perforation using modern imaging techniques and materials. [ABSTRACT FROM AUTHOR]

Endodontic treatment of teeth with pulp canal obliteration presents a challenge given the high likelihood of procedural errors and complications during treatment. These drawbacks can be avoided by using a personalized 3-dimensional (3D) guide designed by overlaying a cone-beam computed tomographic scan with an intraoral scan of the patient. This 3D guide enables the clinician to obtain a straight access to the obliterated root canal.This article described guided endodontics in managing 7 severely obliterated teeth using both virtually designed 3D guides and a customized 1-mm-diameter cylindrical bur. This treatment approach was demonstrated to be safe and fast and can be considered as a predictable technique for the location of calcified canals, thus minimizing complications. [ABSTRACT FROM AUTHOR]

A case of pulp canal obliteration (PCO) two years after the completion of orthodontic treatment is presented. Post orthodontic treatment PCO is a rare finding. A 23 years old female presented with the discoloration of clinical crown of maxillary right central incisor. Radiographic examination revealed the calcified canal and diffused periapical radiolucency. Vitality tests were negative. A decision was made to do root canal treatment followed by the walking bleaching. After the successful completion of the root canal treatment the internal bleaching was performed. The discolored tooth showed significant improvement in color. Internal bleaching is a viable conservative treatment for improving esthetics in single non vital discolored tooth.