Search

This study reports the preparation of cellulose nanocrystals (CNCs) from commercial bleached eucalyptus Kraft pulp (BEKP) using a hydrothermal treatment in the presence of maleic acid (MA), followed by high-pressure homogenization. Compared with conventional hydrolysis methods, this approach offers significant advantages, including lower acid concentration, higher yield, and milder processing conditions. CNCs were produced with a high yield (70-85 wt %) by high-pressure homogenization of hydrothermally treated BEKP fibers with 10-20 wt % maleic acid at 150 °C, giving rise to a stable translucent gel of CNCs with a rod-like morphology (200-400 nm length and 10-40 nm width). The reinforcing potential of the CNCs was also assessed by preparing nanocomposite films with CNC contents of up to 15 wt %, and the results were compared to commercial CNCs from CelluForce. Additionally, their biodegradability in aquatic media was assessed using biological oxygen demand, with results compared to those of neat cellulose fibers. The MA-assisted hydrothermal process is an environmentally friendly alternative to conventional CNC production methods, offering higher yields and enhanced thermal stability while preserving a strong reinforcing property.

The structural organization of cellulose nanocrystal (CNC) suspensions at the membrane surface during frontal ultrafiltration has been characterized, for the first time, at the nano- and microscale by in situ small-angle X-ray and light scattering (SAXS and SALS, respectively). During filtration, the particles assembled at the membrane surface and formed the so-called concentration polarization layer (CPL), which contains CNCs arranged in a chiral nematic (cholesteric) helicoidal structure, with the long axis of the CNCs oriented parallel to the membrane surface, and the helical axis of the cholesteric structure oriented perpendicular to the membrane surface. The self-organization of CNCs in the form of oriented cholesteric structures was further characterized by a pitch gradient in the CPL. The structure of the CPL was also investigated upon release of the transmembrane pressure. SAXS data revealed a relaxation process associated with a diffusion of the CNCs from the membrane surface towards the bulk, while SALS measurements revealed a re-organization of the cholesteric phase that was preserved all along the deposit. The preservation of the observed structure after 14 days of continuous filtration followed by air-drying was confirmed using scanning electron microscopy and wide-angle X-ray diffraction, demonstrating the feasibility of the process scale-up.

Microalgae are emerging as a promising feedstock for bioplastics, with Chlorella vulgaris yielding significant amounts of starch. This polysaccharide is convertible into thermoplastic starch (TPS), a biodegradable plastic of industrial relevance. In this study, we developed a pilot-scale protocol for extracting and purifying starch from 430 g (dry weight - DW) of starch-enriched Chlorella vulgaris biomass. More than 200 g DW of starch were recovered, with an extraction yield and starch purity degree reaching 98 and 87 %, respectively. We have characterized this extracted starch and processed it into TPS using twin-screw extrusion and injection molding. Microalgal starch showed similar properties to those of native plant starch, but with smaller granules. We compared the mechanical properties of microalgal TPS with two controls, namely a commercial TPS and a TPS prepared from commercial potato starch granules. TPS prepared from microalgal starch showed a softer and more ductile behavior compared to the reference materials. This study demonstrates the feasibility of recovering high-purity microalgal starch at pilot scale with high yields, and highlights the potential of microalgal starch for the production of TPS using industrially relevant processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The cell wall of plants and algae is an important cell structure that protects cells from changes in the external physical and chemical environment. This extracellular matrix, composed of polysaccharides and glycoproteins, must be constantly remodeled throughout the life cycle. However, compared to matrix polysaccharides, little is known about the mechanisms regulating the formation and degradation of matrix glycoproteins. We report here that a plant kinase belonging to the DUAL-SPECIFICITY TYROSINE PHOSPHORYLATION-REGULATED KINASE (DYRK) family present in all eukaryotes regulates cell wall degradation after mitosis of Chlamydomonas reinhardtii by inducing the expression of matrix metalloproteinases (MMPs). Without the plant DYRK kinase (DYRKP1), daughter cells cannot disassemble parental cell walls and remain trapped inside for more than 10 days. On the other hand, the DYRKP1 complementation line shows normal degradation of the parental cell wall. Transcriptomic and proteomic analyses indicate a marked down-regulation of MMP gene expression and accumulation, respectively, in the dyrkp1 mutants. The mutants deficient in MMPs retain palmelloid structures for a longer time than the background strain, like dyrkp1 mutants. Our findings show that DYRKP1, by ensuring timely MMP expression, enables the successful execution of the cell cycle. Altogether, this study provides insight into the life cycle regulation in plants and algae., (© The Author(s) 2024. Published by Oxford University Press on behalf of American Society of Plant Biologists. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

An innovative method combining frontal filtration with ultraviolet (UV) curing has been implemented to design cellulosic nanocomposite films with controlled anisotropic textures from nanometric to micrometric length scales. Namely, an aqueous suspension containing poly (ethylene glycol) diacrylate polymer (PEGDA) as a photocurable polymer and cellulose nanocrystals (CNCs) at a 70/30 mass ratio was processed by frontal filtration, followed by in-situ UV-curing in a dedicated cell. This procedure allowed designing nanocomposite films with highly oriented and densely-packed CNCs, homogeneously distributed in a PEGDA matrix over a thickness of ca. 500 μm. The nanocomposite films were investigated with small-angle X-ray scattering (SAXS), by raster-scanning along their height with a 25 μm vertically-collimated X-ray beam. The CNCs exhibited a high degree of orientation, with their director aligned parallel to the membrane surface, combined with an increase in the degree of alignment as concentration increased towards the membrane surface. Scanning electron microscopy images of fractured films showed the presence of regularly spaced bands lying perpendicular to the applied transmembrane pressure, highlighting the presence of a chiral nematic (cholesteric) organization of the CNCs with a pitch gradient that increased from the membrane surface to the bulk., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Hypothesis: Rodlike cellulose nanocrystals (CNCs) exhibit significant potential as building blocks for creating uniform, sustainable materials. However, a critical hurdle lies in the need to enhance existing or devise novel processing that provides improved control over the alignment and arrangement of CNCs across a wide spatial range. Specifically, the challenge is to achieve orthotropic organization in a single-step processing, which entails creating non-uniform CNC orientations to generate spatial variations in anisotropy., Experiments: A novel processing method combining frontal ultrafiltration (FU) and ultrasound (US) has been developed. A dedicated channel-cell was designed to simultaneously generate (1) a vertical acoustic force thanks to a vibrating blade at the top and (2) a transmembrane pressure force at the bottom. Time-resolved in situ small-angle X-ray scattering permitted to probe the dynamical structural organization/orientation of CNCs during the processing., Findings: For the first time, a typical three-layer orthotropic structure that resembles the articular cartilage organization was achieved in one step during the FU/US process: a first layer composed of CNCs having their director aligned parallel to the horizontal membrane surface, a second intermediate isotropic layer, and a third layer of CNCs with their director vertically oriented along the direction of US wave propagation direction., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Lignin-containing cellulose nanofibrils (LCNFs) have attracted great attention because the presence of lignin brought additional merits to cellulose nanofibrils including hydrophobicity, ultraviolet (UV)-shielding capacity, and reduced water sensitivity. In the present work, LCNFs with lignin content up to 21 wt % were prepared with a high yield exceeding 70 wt %, from neat date palm waste, by a hydrothermal treatment (HTT) at 120-150 °C in the presence of 20-30 wt % maleic acid, followed by high-pressure homogenization. The chemical composition, degree of polymerization, morphology, and colloidal and rheological properties of the LCNFs were investigated to understand how the HTT in the presence of MA affected the properties of the resulting LCNFs. Nanopapers prepared from the LCNF suspensions exhibited mechanical properties lower than those from lignin-free CNF-based nanopapers, yet with decreased hydrophilicity. A mechanism explaining how the HTT in the presence of MA facilitated the disintegration of the biomass into nanoscale material was proposed. Overall, the present work demonstrated a feasible and scalable approach for the sustainable production of LCNF suspensions from neat agricultural residues, with a high yield and a high lignin content, without any need to perform a preliminary partial delignification.

The control of starch granule initiation in plant leaves is a complex process that requires active enzymes like Starch Synthase 4 and 3 (SS4 or SS3) and several noncatalytic proteins such as Protein Involved in starch Initiation 1 (PII1). In Arabidopsis leaves, SS4 is the main enzyme that control starch granule initiation, but in its absence, SS3 partly fulfills this function. How these proteins collectively act to control the initiation of starch granules remains elusive. PII1 and SS4 physically interact, and PII1 is required for SS4 to be fully active. However, Arabidopsis mutants lacking SS4 or PII1 still accumulate starch granules. Combining pii1 KO mutation with either ss3 or ss4 KO mutations provide new insights of how the remaining starch granules are synthesized. The ss3 pii1 line still accumulates starch, while the phenotype of ss4 pii1 is stronger than that of ss4. Our results indicate first that SS4 initiates starch granule synthesis in the absence of PII1 albeit being limited to one large lenticular granule per plastid. Second, that if in the absence of SS4, SS3 is able to initiate starch granules with low efficiency, this ability is further reduced with the additional absence of PII1., (© 2023 The Authors. New Phytologist © 2023 New Phytologist Foundation.)

Ivory nut seeds have been traditionally exploited in Central and South America for obtaining vegetable ivory. The residues from this industry are susceptible to valorization as a source of fatty acids (by organic extraction) and mannans (by alkaline dissolution and regeneration). Nonetheless, cellulose may also be recovered at the end of this fractionation process by acid hydrolysis and functionalization, with associated advantages over other lignocellulosic sources due to the absence of lignin in the endospermic tissue. In this work, various experimental parameters (sulfuric acid concentration, temperature, and hydrolysis time) were investigated to optimize the processing conditions for preparing stable nanocellulose suspensions after ultrasonication. The most stable nanocellulose gel (1 wt% solid content) was obtained after 4-h hydrolysis at 60 °C with 8 M H 2 SO 4 and was characterized by using complementary tech-niques, including dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), nano-fibril sulfation measurements, vibrational and solid-state nuclear magnetic resonance (CP/MAS 13C-NMR) spectroscopies, and thermal analysis. This nanocellulose hydrogel is susceptible to further utilization in various applications and fields, e.g., in agricul-ture for controlling the release of agrochemicals, in pharmaceutics for developing new dosage forms, and in the treatment of wastewater from the textile and paper industries.

In the nanomedicine field, there is a need to widen the availability of nanovectors to compensate for the increasingly reported side effects of poly(ethene glycol). Nanovectors enabling cross-linking can further optimize drug delivery. Cross-linkable polyoxazolines are therefore relevant candidates to address these two points. Here we present the synthesis of coumarin-functionalized poly(2-alkyl-2-oxazoline) block copolymers, namely, poly(2-methyl-2-oxazoline)- block -poly(2-phenyl-2-oxazoline) and poly(2-methyl-2-oxazoline)- block -poly(2-butyl-2-oxazoline). The hydrophilic ratio and molecular weights were varied in order to obtain a range of possible behaviors. Their self-assembly after nanoprecipitation or film rehydration was examined. The resulting nano-objects were fully characterized by transmission electron microscopy (TEM), cryo-TEM, multiple-angle dynamic and static light scattering. In most cases, the formation of polymer micelles was observed, as well as, in some cases, aggregates, which made characterization more difficult. Cross-linking was performed under UV illumination in the presence of a coumarin-bearing cross-linker based on polymethacrylate derivatives. Addition of the photo-cross-linker and cross-linking resulted in better-defined objects with improved stability in most cases.

Lignin-containing cellulose nanofibrils (LCNFs) have emerged as a new class of nanocelluloses where the presence of residual lignin is expected to impart additional attributes such as hydrophobicity or UV-absorption. In the present work, LCNFs with a lignin content between 7 and 15 wt% were prepared via a TEMPO-mediated oxidation as chemical pretreatment followed by high-pressure homogenization. The impact of the carboxyl content (CC) on the properties of the resulting LCNF gel, in terms of lignin content, colloidal properties, morphology, crystallinity, and thermal stability, were investigated. It was found that lignin content was significantly decreased at increasing CC. In addition, CC had a positive effect on colloidal stability and water contact angle, as well as resulting in smaller fibrils. This lower size, together with the lower lignin content, resulted in a slightly lower thermal stability. The reinforcing potential of the LCNFs when incorporated into a ductile polymer matrix was also explored by preparing nanocomposite films with different LCNF contents that were mechanically tested under linear and non-linear regimes by dynamic mechanical analysis (DMA) and tensile tests. For comparison purposes, the reinforcing effect of the LCNFs with lignin-free CNFs was also reported based on literature data. It was found that lignin hinders the network-forming capacity of LCNFs, as literature data shows a higher reinforcing potential of lignin-free CNFs. Nonetheless, the tensile strength of the acrylic matrix was enhanced by 10-fold at 10 wt% of LCNF content.

Influenza viruses bind to their target through a multivalent interaction of their hemagglutinins (HAs) with sialosides at the host cell surface. To fight the virus, one therapeutic approach consists in developing sialylated multivalent structures that can saturate the virus HAs and prevent the binding to host cells. We describe herein the biotechnological production of sialylated solid lipid microparticles (SSLMs) in 3 steps: (i) a microbiological step leading to the large-scale production of sialylated maltodextrins by metabolic engineering of an Escherichia coli strain, (ii) a new in vitro glycosylation process using the amylomaltase MalQ, based on the transglycosylation of the terminal sialoside ligand of the sialylated maltodextrin onto a long-chain alkyl glucoside, and (iii) the formulation of the final SSLMs presenting a multivalent sialic acid. We also describe the morphology and structure of the SSLMs and demonstrate their very promising properties as influenza virus inhibitors using hemagglutination inhibition and microneutralization assays on the human A/H1N1 pdm09 virus., (© The Author(s) 2022. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Due to its intrinsic electrical conductivity, polyaniline (PANI) is one of the most promising conducting polymers for high-performance applications in a wide range of technological fields. However, its poor dispersibility in water and organic solvents markedly imparts its processability and electrical conductivity. Herein, we report a green and one-step approach to preparing stable colloidal dispersions of highly dispersible hybrid nanoparticles by polymerizing PANI onto chitin nanocrystals (ChNCs) as biotemplates, via initiation through the surface amino groups of ChNCs. Evidence of the grafting of PANI onto ChNCs was supported by transmission electron microscopy (TEM), as well as Raman and Fourier transform infrared (FTIR) spectroscopies. Nanocomposite films were prepared by mixing the PANI- g -ChNCs with a waterborne poly(vinyl acetate) latex dispersion followed by casting and film formation at room temperature. The mechanical properties were tested as a function of the PANI- g -ChNC content. In addition, it was shown that at a proper content of PANI in ChNCs, and over a critical loading in the PANI- g -ChNCs, a conductive film was obtained, without sacrificing the reinforcing effect of the rodlike nanofiller. As a potential application, conductive waterborne adhesives for wood were prepared and the performance of the adhesives was tested. This research provides a facile route to fabricating a new class of hybrid nanofiller from a biobased origin, stable in water and easy to mix with waterborne dispersions, combining the merits of the ChNC nanofiller with the conductivity of PANI.

Polysaccharides are the most abundant class of biopolymers, holding an important place in biological systems and sustainable material development. Their spatial organization and intra- and intermolecular interactions are thus of great interest. However, conventional single crystal crystallography is not applicable since polysaccharides crystallize only into tiny crystals. Several crystallographic methods have been developed to extract atomic-resolution structural information from polysaccharide crystals. Small-probe single crystal diffractometry, high-resolution fiber diffraction and powder diffraction combined with molecular modeling brought new insights from various types of polysaccharide crystals, and led to many high-resolution crystal structures over the past two decades. Current challenges lie in the analysis of disorder and defects by further integrating molecular modeling methods for low-resolution diffraction data., Competing Interests: Declaration of competing interest The authors declare that they have no competing financial interest or personal relationships that influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In the present work, the nucleating aptitude for poly-L-(lactic acid) (PLLA) of several biobased nanoparticles (NPs) with different morphologies and surface properties, including cellulose nanofibrils with and without lignin (LCNFs and CNFs) as well as cellulose, chitin and starch nanocrystals (CNCs, ChNCs and SNCs), was investigated. A single melt-processing step using a small amount of poly(ethylene glycol) (PEG) as carrier for the NPs was adopted to prepare films with the same nanofiller content of 1 wt%. The nucleation efficiency was investigated by differential scanning calorimetry using Avrami's and Lauritzen-Hoffman's secondary nucleation theory. The crystallization half-time was found to change considerably according to the morphology and surface properties of the NPs, with the lowest time observed for CNFs and CNCs, followed by ChNCs, SNCs and LCNFs. Comparing the surface energy components of the different nucleating agents, it was found that the nanofiller with the highest γ p had the lowest t 1/2 and demonstrated the most effective nucleating aptitude. The evolution of the melt rheological properties of the different compositions, and the mechanical and optical properties of the films with and without a short annealing treatment were also studied., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Twin-screw extrusion (TSE) is a recent strategy used to prepare nanocelluloses at high solid contents. However, various aspects of the mechanism of disintegration and the role of fiber pretreatment remain to be elucidated. Oxidized cellulose fibers with carboxyl contents between 300 and 700 μmol·g -1 were extruded in the presence of polyvinyl alcohol (PVA) at a 80/20 (w/w) ratio, to produce high-consistency nanocellulose gels at 15 wt% solid content, ready for use in multiple applications. The influence of the origin of the pulps and the oxidation treatment on the efficiency of fiber disintegration was evaluated by porosity measurement. The rheological properties of the nanocellulose-PVA gels and the mechanical properties and transparency of the resulting nanopapers were studied as well. Combining TSE and rotor-stator dispersion or short sonication homogenization contributed to enhancing the fibrillation during extrusion, providing a method to increase the fraction of nanocellulose in a much less energy-consuming manner., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Colloidal nanoparticles were prepared by aqueous self-assembly of amphiphilic β-cyclodextrins (βCDs) acylated on their secondary face with C 14 chains to a total degree of substitution of 7.0, via a thermolysin-catalyzed transesterification process. The small-angle X-ray scattering pattern of the nanoparticles was consistent with a reverse hexagonal organization. Cryo-transmission electron microscopy images revealed particles with spectacular tortuous shapes and consisting of misoriented domains with a regular columnar hexagonal structure, separated by sharp interfaces. Edge dislocations as well as a variety of stepped tilt grain boundaries (GBs) composed of symmetrical and asymmetrical sections, together with one twist GB, were identified from axial views of the columnar organization. The tilt GB structure was analyzed using the concepts of coincidence site lattice and structural units developed to describe the atomic structure of interfaces in various types of polycrystals. The tilt GBs were described using sequences of βCD-C 14 columns that differed by the number of neighboring columns (5, 6 or 7) and exhibiting distinctive contrasts. To our knowledge, this is the first time that these types of topological defects are described at the nanometric scale by direct observation of colloidal polycrystalline hexosomes of self-organized amphiphiles.

Carbohydrate nanoparticles, both naturally derived and synthetic ones, have attracted scientific and industrial attention as high-performance renewable building blocks of functional materials. Electron microscopy (EM) has played a central role in investigations of their morphology and molecular structure, although the intrinsic radiation sensitivity of carbohydrate crystals has often hindered the in-depth characterization with EM techniques. This contribution reviews the recent advances in the electron microscopy of the carbohydrate nanoparticles. In particular, we highlight the recent efforts made to understand the three-dimensional shape and structural heterogeneity of nanoparticles using low-dose electron tomography and electron diffraction techniques coupled with cryogenic transmission electron microscopy., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Ogawa and Putaux.)

Foodborne diseases caused by resistance of microorganisms to multiple antimicrobial agents have emerged as a major public health concern around the world. The search for potential antimicrobials has resulted in the emergence of metal nanoparticles for protection against these infections. In this study an eco-friendly and green approach was used to biosynthesize hybrid Ag/AgCl nanoparticles (NPs), using levan from Bacillus mojavensis as a stabilizing/reducing agent, with a high efficiency against a broad spectrum of foodborne bacteria as well as biofilm formations. The morphology and physicochemical characteristics of levan-Ag/AgCl NPs were investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), UV-vis spectroscopy (UV), dynamic light scattering (DLS) and thermogravimetric analysis (TGA). The hybrid levan-Ag/AgCl was evaluated for antibacterial activity against foodborne pathogenic bacteria ( Escherichia coli , Klebsiella pneumoniae , Salmonella enterica , Pseudomonas aeruginosa , Staphylococcus aureus , Micrococcus luteus , Listeria monocytogenes , Enterococcus faecalis , Bacillus subtilis and Bacillus thuringiensis ). The study demonstrated the strong efficiency of hybrid levan-Ag/AgCl NPs as a potent inhibitor against all tested strains, with much higher activity against Gram-negative than Gram-positive bacteria. Furthermore, bacterial strains were found to be highly sensitive to hybrid levan-Ag/AgCl NPs in comparison to the tested antibiotics. As a possible application of levan-Ag/AgCl NPs as an additive in packaging, PVA films with different amounts of hybrid levan-Ag/AgCl NPs were prepared by casting and their antibacterial, mechanical, and optical properties and ability to expand the shelf life of beef meat were explored. Interestingly, the amount of Ag leached out from films was below the permissible limit. This work demonstrates the strong antibacterial action of hybrid levan-Ag/AgCl NPs and their potential use in bioactive packaging material., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Ordered molecular self-assembly of glycoamphiphiles has been regarded as an attractive, practical and bottom-up approach to obtain stable, structurally well-defined, and functional mimics of natural polysaccharides. This study describes a versatile and rational design of carbohydrate-based hydrogelators through N,N'-substituted barbituric acid-mediated Knoevenagel condensation onto unprotected carbohydrates in water. Amphiphilic N-substituted β-C-maltosylbarbiturates self-assembled into pH- and calcium-triggered alginate-like supramolecular hydrogel fibers with a multistimuli responsiveness to temperature, pH and competitive metal chelating agent. In addition, amphiphilic N,N'-disubstituted β-C-maltosylbarbiturates formed vesicle gels in pure water that were scarcely observed for glyco-hydrogelators. Finally, barbituric acid worked as a multitasking group allowing chemoselective ligation onto reducing-end carbohydrates, structural diversity, stimuli-sensitiveness, and supramolecular interactions by hydrogen bonding., (© 2021 Wiley-VCH GmbH.)

Stable biobased waterborne Pickering dispersions of acrylated epoxidized soybean oil (AESO) were developed using chitin nanocrystals (ChNCs) as sole emulsifier without any additives. Thin AESO-ChNC nanocomposite films were produced by UV-curing thin-coated layers of the AESO emulsion after water evaporation. The kinetics of photopolymerization were assessed by monitoring the consumption of the AESO acrylate groups by infrared spectroscopy (Fourier transform infrared (FTIR)). The curing was faster in the presence of ChNCs, with a disappearance of the induction period observed for neat AESO. The coating of AESO droplets with a thin layer of ChNCs was confirmed by scanning electron microscopy (SEM) observation. SEM and transmission electron microscopy (TEM) images revealed the honeycomb organization of ChNCs inside the cured AESO-ChNC films. The mechanical, thermal, and optical properties of the nanocomposite films were studied by dynamic mechanical analysis (DMA), tensile testing, differential scanning calorimetry (DSC), and transmittance measurement, as a function of ChNC content. The inclusion of ChNCs is strongly beneficial to increase the stiffness and strength of the cured films, without compromising its optical transparency. The ability of ChNCs to act as an emulsifier for AESO in replacement of synthetic surfactants and their strong reinforcing effect in UV-cured films offer new opportunities to produce waterborne stable dispersions from AESO for application in biobased coatings and adhesives.

Rectangular V-amylose single crystals were prepared by adding racemic ibuprofen to hot dilute aqueous solutions of native and enzymatically-synthesized amylose. The lamellar thickness increased with increasing degree of polymerization of amylose and reached a plateau at about 7 nm, consistent with a chain-folding mechanism. The CP/MAS NMR spectrum as well as base-plane electron and powder X-ray diffraction patterns recorded from hydrated specimens were similar to those of V-amylose complexed with propan-2-ol. Amylose was crystallized in an orthorhombic unit cell with parameters a = 2.824 ± 0.001 nm, b = 2.966 ± 0.001 nm, and c = 0.800 ± 0.001 nm. A molecular model was proposed based on structural analogies with the V propan-2-ol complex and on assumptions on the stoichiometry of ibuprofen. The unit cell would contain four antiparallel 7-fold amylose single helices with ibuprofen molecules distributed inside and between the helices., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The breakdown and buildup mechanisms in concentrated cellulose nanocrystal (CNC) suspensions under shear and during relaxation upon cessation of shear were accessed by small-angle X-ray and light scattering combined with rheometry. The dynamic structural changes over nanometer to micrometer lengthscales were related to the well-known three-regime rheological behavior. In the shear-thinning regime I, the large liquid crystalline domains were progressively fragmented into micrometer-sized tactoids, with their cholesteric axis aligned perpendicular to the flow direction. The viscosity plateau of regime II was associated to a further disruption into submicrometer-sized elongated tactoids oriented along the velocity direction. At high shear rate, regime III corresponded to the parallel flow of individual CNCs along the velocity direction. Upon cessation of flow, the relaxation process occurred through a three-step buildup mechanisms: i) a fast reassembling of the individual CNCs into a nematic-like organization established up to micrometer lengthscales, ii) a slower formation of oriented large cholesteric domains, and iii) their isotropic redistribution., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The two ends of rodlike cellulose II nanocrystals (CNC-II) were regioselectively functionalized either with gold nanoparticles or thermosensitive polymer chains. In the first case, after the introduction of sulfur atoms at both ends of the rods, CNC-II were labelled using a method based on the in situ nucleation and growth of gold nanoparticles (AuNPs) from soluble derivatives. Transmission electron microscopy (TEM) images showed that such a method resulted in the grafting of one monodisperse AuNP at each extremity of the CNC-II, i.e. to the formation of hybrid dumbbell-shaped objects. No AuNP was detected on the lateral surfaces of the CNC-II and almost all observed CNC-II exhibited this dual labeling. This result confirmed with a good statistics when compared to previous works the possibility to derivatize only the two ends of the CNC-II, thanks to the antiparallel arrangement of cellulose chains in these nanoparticles. In the second case, the localized grafting of temperature-sensitive macromolecules onto the ends of the CNC-II was performed using an oxidation reaction followed by a peptide coupling. This end-specific grafting of thermosensitive chains onto CNC-II enhanced their colloidal stability when the temperature was below the lower critical solution temperature (LCST) of the polymer. Above the LCST, the TEM images revealed the formation of a network extending to tens of microns resulting from end-to-end associations of the derivatized rods through attractive interactions between collapsed polymer chains. Rheology experiments further evidenced a temperature-induced sol-gel transition from a liquid-like (sol) behavior below the LCST to solid-like (gel) behavior above the LCST, in agreement with a change from purely repulsive interactions to interconnections via the hydrophobic collapsed chains. Importantly, all results concurred with a full reversibility of the phenomena upon cooling and reproducibility when samples were subjected to temperature cycles around the LCST. This work reveals that the dual site-specific derivatization of CNC-II can provide symmetric hybrid particles with innovative assembling and macroscopic properties that cannot be obtained through homogeneous chemical modifications.

Chitin nanocrystals (ChNCs) produced by hydrochloric acid hydrolysis of chitin were used as stabilizing agent for oil-in-water (O/W) emulsification of soybean oil (SO), acrylated soybean oil (ASO), and epoxidized soybean oil (ESO). The emulsion stability, droplet size, and rheology of the emulsion were found to be significantly affected by the oil chemical structure. Strong interaction between ChNCs and the oil droplets enhanced the stabilizing efficiency of ChNCs through a Pickering effect, resulting in emulsions with low droplet size and long-term stability. The use of ChNCs as stabilizer for O/W emulsions in replacement of synthetic surfactants opens new avenues to produce emulsions for a wide variety of applications, including cosmetic products, coating, inks and adhesives., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the senior authors of the article; Jean-Luc Putaux and Bruno Jean. There are serious concerns about the reliability of the data presented in this article, which critically affects the main conclusions. Namely, TEM Figs. 3, 6 and 7 show signs of manipulation, such as the presence of repeated fragments and the use of the clone stamp tool applied with some image editing software. The first author of the paper, Fangbo Lin, was contacted regarding this matter but did not respond. The two above mentioned authors apologize for any inconvenience to readers., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

An experimental study of the ultrasonic compression moulding (UCM) to manufacture biobased composites made of semicrystalline starch powders and softwood fibres is described. The main objective was to assess the potential of using this fast and economical processing technique to elaborate a 100% biobased composite which might substitute more usual polymer materials for structural applications. The starch powder was chosen as raw material for the matrix while the reinforcement was made of softwood fibres. Tablets made of starch only and composite beams were processed under different conditions and characterised by several techniques. Three types of starch powders and two types of fibres were used as raw materials. A morphological and crystalline analysis was carried out by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The native semicrystalline structure of starch granules was not totally preserved so as to obtain a homogeneous material. Diametral compression tests on tablets were performed to improve the processing route and obtain the materials with the best properties. Bending tests were used on composite beams to quantify the mechanical properties and study the effects of the processing parameters. The optimum processing parameters were defined and allowed obtaining a matrix for which the flexural strength reached 21 MPa. Mechanical properties were improved when fibres were added into the matrix: three-points bending tests showed a Young's modulus of 6 GPa, a flexural strength of 75 MPa and a flexural strain at break of 6% for a bulk density of 1.25. Considering these results, UCM appears to be a promising process to design a 100% biobased composite with mechanical properties comparable to those of classical discontinuous fibre composites., Competing Interests: The authors declare the following conflict of interests: Pierre Dumont; [is an Associate Editor for the Materials Science section at Heliyon]., (© 2021 Published by Elsevier Ltd.)

Emulsion polymerization provides a sustainable way to produce latex polymers for coatings and adhesives thanks to the use of water as a dispersion medium. This synthesis approach can be even more attractive if synthetic surfactant can be replaced by biobased solid particles as a stabilizer, through what is known as a "Pickering effect". Herein, latex dispersions with solid content up to 35 wt% were successfully produced by emulsion polymerization using starch nanocrystals (SNCs) as a sole stabilizer and H 2 O 2 /citric acid as a redox-initiator. The effect of the SNC modification with vinyltriethoxysilane (VTES) on the colloidal properties of the polymer dispersion and performance of the resulting nanocomposite film were investigated. As an application of this approach, pressure-sensitive adhesive (PSA) dispersions have been prepared via Pickering emulsion polymerization in the presence of 8 wt% SNCs. The use of VTES-SNCs has a beneficial impact on the performance of PSAs with improved peel strength and wettability. The possibility to use SNCs as a stabilizer to replace synthetic surfactants in emulsion polymerization opens new avenues for the application of SNCs as biobased Pickering stabilizers to produce latex for coatings, adhesives, inks, and textiles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Abnormal carbohydrate structures known as polyglucosan bodies (PGBs) are associated with neurological disorders, glycogen storage diseases (GSDs), and aging. A hallmark of the GSD Lafora disease (LD), a fatal childhood epilepsy caused by recessive mutations in the EPM2A or EPM2B genes, are cytoplasmic PGBs known as Lafora bodies (LBs). LBs result from aberrant glycogen metabolism and drive disease progression. They are abundant in brain, muscle and heart of LD patients and Epm2a -/- and Epm2b -/- mice. LBs and PGBs are histologically reminiscent of starch, semicrystalline carbohydrates synthesized for glucose storage in plants. In this study, we define LB architecture, tissue-specific differences, and dynamics. We propose a model for how small polyglucosans aggregate to form LBs. LBs are very similar to PGBs of aging and other neurological disorders, and so these studies have direct relevance to the general understanding of PGB structure and formation., Competing Interests: Declaration of Competing Interest All authors declare no competing interests., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Twin-screw extrusion (TSE) is a rather recent method to produce cellulose nanofibrils (CNFs) at a high solid content under continuous feeding. Here, never-dried commercial eucalyptus pulp was used as starting material to produce CNFs by TSE after a chemical pretreatment to introduce carboxylic groups via TEMPO-mediated oxidation and carboxymethylation. Five samples with a carboxyl content ranging from 800 to 1300 μmol.g -1 were produced to explore how the carboxyl content affects the aptitude of cellulose fibers to be broken down to nanoscale. The properties of the resulting CNFs in terms of nanosized fraction, morphology and rheological properties were investigated. A critical carboxyl content of 700 μmol.g -1 was a prerequisite for the successful conversion of cellulose fibers into a CNF gel by TSE, regardless the pretreatment method. The degree of swelling of the fibers was put forward to account for this critical parameter., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Nanocomposites based on thermoplasticized starch filled with cellulose nanofibrils (CNFs) were produced in a single step by twin-screw extrusion of corn starch granules, glycerol as a plasticizer, and oxidized cellulose fibers. The objective was to demonstrate the possibility to produce CNFs in situ during the processing of the nanocomposite when a hydrophilic polymer matrix was used. For comparison purpose, nanocomposites were also prepared by extrusion of a previously prepared CNF suspension, corn starch granules and glycerol. The nanocomposites were characterized in terms of mechanical properties, morphology, crystallinity, and transparency. The nanocomposites prepared via in situ fibrillation displayed a higher strength than those produced by incorporating readily prepared CNFs. In addition, the transparency degree up to a 15 wt% CNF content was similar for the two processing routes, confirming the effective breakdown of pretreated cellulose fibers into CNFs during the extrusion process., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Artemisinin and its derivatives are currently recommended by World Health Organization for the treatment of malaria. Severe malaria requires a parenteral administration of artemisinin-based formulations. However, the effective use of artemisinin is limited by the pharmacokinetic characteristics of the drug (low water solubility, poor bioavailability and short half-life). To overcome some of these drawbacks, artemisinin-loaded surface-decorated nanoparticles were prepared by co-nanoprecipitation of γ-cyclodextrin bioesterified with C 10 alkyl chains and polyethylene glycol (PEG) derivatives (polysorbate 80 and DMPE-mPEG2000). Using a single dose (1.5 mg kg -1 or 2 mg kg -1 ) by intravenous administration, we investigated the in vivo pharmacokinetic properties in healthy rats of two types of artemisinin-loaded nanoparticle formulations, namely, nanosphere and nanoreservoir systems versus an ethanolic-aqueous solution of artemisinin as reference. Significantly enhanced pharmacokinetic parameters were obtained with artemisinin-loaded nanoparticles. In comparison to reference formulation, the geometric mean exposures in plasma (AUC 0-t ) exhibited 2.35 and 3.26-fold increases when artemisinin was loaded in nanoreservoir and nanosphere systems, respectively. Its plasma half-life increased 4.00 and 6.25-fold and its clearance decreased up to 2.5 and 4.72-fold. Artemisinin was successfully administered intravenously by means of surface-decorated amphiphilic γ-cyclodextrin nanostructures and showed a longer elimination half-life with respect to an artemisinin solution in ethanol. Therefore, these systems are likely to provide significant advantages for the intravenous treatment of severe malaria., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Cellulose (Cel) nanofibrils (CNFs) produced by periodate oxidation of native cellulose fibers were functionalized with silver (Ag) nanoparticles (NPs) using Tollens' reaction. The morphology and chemical composition of the resulting Cel-Aghybrid nanofibrils were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), as well as Fourier-transform infrared (FTIR) and UV-Vis spectroscopies. To check whether the hybridization with Ag affected the reinforcing potential of the CNFs, nanocomposite films based on an acrylic matrix filled with the as-prepared Cel-Ag nanofibrils at different contents were processed by film casting. Their mechanical properties were investigated by dynamic thermomechanical analysis (DMTA). The hybrid Cel-Ag nanofibrils exhibited good bactericidal properties against Gram + and Gram - bacteria. Interestingly, the presence of Ag NPs did not seem to affect the reinforcing potential of the nanocellulose, and the amount of Ag leached out from films was below the permissible limit of 12 ppb. Nanocomposites based on this hybrid Cel-Ag nanofiller thus have a great potential in the field of active packaging films, coating and adhesives with enhanced antibacterial activity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Starch granules that accumulate in the plastids of plants vary in size, shape, phosphate, or protein content according to their botanical origin. Depending on their size, the applications in food and nonfood industries differ. Being able to master starch granule size for a specific plant, without alteration of other characteristics (phosphate content, protein content, etc.), is challenging. The development of a simple and effective screening method to determine the size and shape of starch granules in a plant population is therefore of prime interest. In this study, we propose a new method, NegFluo, that combines negative confocal autofluorescence imaging in leaf and machine learning (ML)-based image analysis. It provides a fast, automated, and easy-to-use pipeline for both in situ starch granule imaging and its morphological analysis. NegFluo was applied to Arabidopsis leaves of wild-type and ss4 mutant plants. We validated its accuracy by comparing morphological quantifications using NegFluo and state-of-the-art methods relying either on starch granule purification or on preparation-intensive electron microscopy combined with manual image analysis. NegFluo thus opens the way to fast in situ analysis of starch granules.

Starch granule morphology is highly variable depending on the botanical origin. Moreover, all investigated plant species display intra-tissular variability of granule size. In potato tubers, the size distribution of starch granules follows a unimodal pattern with diameters ranging from 5 to 100 µm. Several evidences indicate that granule morphology in plants is related to the complex starch metabolic pathway. However, the intra-sample variability of starch-binding metabolic proteins remains unknown. Here, we report on the molecular characterization of size-fractionated potato starch granules with average diameters of 14.2 ± 3.7 µm, 24.5 ± 6.5 µm, 47.7 ± 12.8 µm, and 61.8 ± 17.4 µm. In addition to changes in the phosphate contents as well as small differences in the amylopectin structure, we found that the starch-binding protein stoichiometry varies significantly according to granule size. Label-free quantitative proteomics of each granule fraction revealed that individual proteins can be grouped according to four distinct abundance patterns. This study corroborates that the starch proteome may influence starch granule growth and architecture and opens up new perspectives in understanding the dynamics of starch biosynthesis.

We present here the grafting of thermoresponsive polyetheramines at the reducing ends of cellulose nanocrystals (CNCs) using a two-step protocol involving an end carboxylation followed by a peptide coupling with the primary amine moiety of the polyetheramine. In aqueous suspensions these end-modified CNCs became associated by their derivatized tips when the temperature was raised past a lower critical solution temperature (LCST), above which these polyetheramines are known to collapse and become hydrophobic. The CNC association was reversible when the temperature was lowered and the phenomenon of association/disassociation was totally reproducible in repeated temperature cycles as followed by dynamic light scattering (DLS). Small-angle neutron scattering (SANS) data revealed the presence of grafted chains with an extended conformation and showed the assembly of modified CNCs into swollen aggregates in suspension at T > LCST. Transmission electron microscopy (TEM) images confirmed that the once dispersed derivatized CNCs at low temperature became associated through their reducing ends above the LCST. At such temperatures, these modified CNCs attached themselves in a remarkable fashion, forming the arms of regular four-, five-, or six-branched stars.

Chlamydomonas reinhardtii represents an ideal model microbial system to decipher starch metabolism. In this green algae, in cells growing in photosynthetic conditions, starch mainly accumulates as a sheath surrounding the pyrenoid while in cells subjected to a nutrient starvation, numerous starch granules are filling up the plastid stroma. The mechanisms underlying and regulating this switch from photosynthetic to storage starch metabolisms are not known. In this work, we have isolated a Chlamydomonas mutant strain containing a deletion in chromosome 2 which displays abnormal starch granule distribution. Under nitrogen starvation, this strain contains an additional starch granules population. These granules are twice as big as the wild-type granules and display characteristics of photosynthetic starch. Genetic and functional complementation analyses allowed us to identify the gene responsible for this original phenotype which was called BSG1 for "Bimodal Starch Granule". Possible roles of BSG1 in starch metabolism modifications during the transition from photosynthetic to starved growth conditions are discussed.

In vitro polymerization of β-mannans is a challenging reaction due to the steric hindrance confered by the configuration of mannosyl residues and the thermodynamic instability of the β-anomer. Whatever the approach used to date-whether chemical, or enzymatic with glycosynthases and mannosyltransferases-pure β-1,4-mannans have never been synthesized in vitro. This has limited attempts to investigate their role in the production of plant and algal cell walls, in which they are highly abundant. It has also impeded the exploitation of their properties as biosourced materials. In this paper, we demonstrate that TM1225, a thermoactive glycoside phosphorylase from the hyperthermophile species Thermotoga maritima, is a powerful biocatalytic tool for the ecofriendly synthesis of pure β-1,4-mannan. The recombinant production of this enzyme and its biochemical characterization allowed us to prove that it catalyzes the reversible phosphorolysis of β-1,4-mannosides, and determine its role in the metabolism of the algal mannans on which T. maritima feeds in submarine sediments. Furthermore, after optimizing the reaction conditions, we exploited the synthetic ability of TM1225 to produce β-1,4-mannan in vitro. At 60 °C and from d-mannose 1-phosphate and mannohexaose, the enzyme synthesized mannoside chains with a degree of polymerization up to 16, which precipitated into lamellar single crystals. The X-ray powder diffraction and base-plane electron diffraction patterns of the lamellar crystals unambiguously show that the synthesized product belongs to the mannan I family previously observed in planta in pure linear mannans, such as those of the ivory nut. The in vitro formation of these mannan I crystals is likely determined by the high reaction temperature and the narrow chain length distribution of the insoluble chains.

The initiation of starch granule formation is still poorly understood. However, the soluble starch synthase 4 (SS4) appears to be a major component of this process since it is required to synthesize the correct number of starch granules in the chloroplasts of Arabidopsis thaliana plants. A yeast two-hybrid screen allowed the identification of several putative SS4 interacting partners. We identified the product of At4g32190 locus as a chloroplast-targeted PROTEIN INVOLVED IN STARCH INITIATION (named PII1). Arabidopsis mutants devoid of PII1 display an alteration of the starch initiation process and accumulate, on average, one starch granule per plastid instead of the five to seven granules found in plastids of wild-type plants. These granules are larger than in wild-type, and they remain flat and lenticular. pii1 mutants display wild-type growth rates and accumulate standard starch amounts. Moreover, starch characteristics, such as amylopectin chain length distribution, remain unchanged. Our results reveal the involvement of PII1 in the starch priming process in Arabidopsis leaves through interaction with SS4., (© 2018 The Authors. New Phytologist © 2018 New Phytologist Trust.)

The crystallization of amylose from dilute solutions in the presence of a series of linear saturated fatty acids (C3 to C20) was investigated by varying the fatty acid concentration, crystallization temperature and solvent composition (DMSO:water in various ratios). The morphology and structure of the resulting model lamellar crystals were characterized by transmission electron microscopy as well as electron and X-ray diffraction. By adequately controlling the crystallization parameters, all fatty acids could induce the formation of both 6- and 7-fold V-amylose single helices, indicating that the amylose conformation was independent of the chain length of the complexing molecule. Three allomorphs (V6 I , V6 II and V7) were identified individually or in mixtures. Higher concentrations of fatty acid and DMSO and a higher temperature promoted the formation of the more compact V6 I structure. V6 II and V7 preferentially formed with lower concentrations of fatty acids and DMSO and at lower temperatures. In the case of C5-C20 fatty acids, V7 was only obtained in the presence of DMSO. The polymorphism of V-amylose complexes with linear saturated fatty acids thus appears to be a more general phenomenon than previously reported in the literature., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The periodate oxidation of microfibrillated cellulose followed by a reduction treatment was implemented to produce a new type of sterically stabilized cellulosic nanocrystals, which were characterized at the molecular and colloidal length scales. Solid-state NMR data showed that these treatments led to objects consisting of native cellulose and flexible polyols resulting from the oxidation and subsequent reduction of cellulose. A consistent set of data from dynamic light scattering, turbidimetry, transmission electron microscopy, and small-angle X-ray scattering experiments further showed that stable neutral elongated nanoparticles composed of a crystalline cellulosic core surrounded by a shell of dangling polyol chains were produced. The dimensions of these biosourced nanocrystals could be controlled by the degree of oxidation of the parent dialdehyde cellulose sample. The purely steric origin of the colloidal stability of these nanoparticles is a strong asset for their use under conditions where electrostatics no longer provides colloidal stability.

The nanoscale characteristics of the mineral phase in bone tissue such as nanocrystal size, organization, structure and composition have been identified as potential markers of bone quality. However, such characterization remains challenging since it requires combining structural analysis and imaging modalities with nanoscale precision. In this paper, we report the first application of automated crystal orientation mapping using transmission electron microscopy (ACOM-TEM) to the structural analysis of bone mineral at the individual nanocrystal level. By controlling the nanocrystal growth of a cortical bovine bone model artificially heated up to 1000 °C, we highlight the potential of this technique. We thus show that the combination of sample mapping by scanning and the crystallographic information derived from the collected electron diffraction patterns provides a more rigorous analysis of the mineral nanostructure than standard TEM. In particular, we demonstrate that nanocrystal orientation maps yield valuable information for dimensional analysis. Furthermore, we show that ACOM-TEM has sufficient sensitivity to distinguish between phases with close crystal structures and we address unresolved questions regarding the existence of a hexagonal to monoclinic phase transition induced by heating. This first study therefore opens new perspectives in bone characterization at the nanoscale, a daunting challenge in the biomedical and archaeological fields, which could also prove particularly useful to study the mineral characteristics of tissue grown at the interface with biomaterials implants., Statement of Significance: In this paper, we propose a new approach to assess the mineral properties of bone at the individual nanocrystal level, a major challenge for decades. We use a modified Transmission Electron Microscopy acquisition mode to perform an Automated Crystal Orientation Mapping (ACOM-TEM) by analyzing electron diffraction patterns. We tune the mineral nanocrystal size by heating a model bovine bone system and show that this method allows precisely assessing the mineral nanocrystal size, orientation and crystallographic phase. ACOM-TEM therefore has sufficient sensitivity to solve problems that couldn't be answered using X-ray diffraction. We thus revisit the fine mechanisms of bone nanocrystal growth upon heating, a process currently used for bone graft manufacturing, also of practical interest for forensic science and archaeology., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Rubber materials with well-dispersed fillers and large mechanical reinforcement have been obtained by melt-processing a diene elastomer matrix and tailored nanocellulose powders having both a high specific surface area and a modified interface. Such filler powders with a specific surface area of 180 m2 g-1 and 100 m2 g-1 have been obtained by freeze-drying suspensions of short needle-like cellulose nanocrystals (CNCs) and entangled networks of microfibrillated cellulose (MFC) in tert-butanol/water, respectively. A quantitative and toposelective filler surface esterification was performed using a gas-phase protocol either with palmitoyl chloride (PCl) to obtain a hydrophobic but non-reactive nanocellulose interface, or with 3,3'-dithiopropionic acid chloride (DTACl) to introduce reactive groups that can covalently bind the nanocellulose interface to the dienic matrix in a subsequent vulcanization process. A set of filled materials was prepared varying the filler morphology, interface and volume fraction. Transmission electron microscopy images of ultrathin cryo-sections showed that modified nanocellulose fillers presented a relatively homogeneous distribution up to a volume fraction of 20%. The materials also exhibited a significant modulus increase, while keeping an extensibility in the same range as that of the neat matrix. Strikingly, in the case of the reactive interface, a strong stress-stiffening behavior was evidenced from the upward curvature of the tensile curve, leading to a large increase of the ultimate stress (up to 7 times that of the neat matrix). Taken together, these properties, which have never been previously reported for nanocellulose-filled elastomers, match well the mechanical characteristics of industrial carbon black or silica-loaded elastomers.

Background: The modification of β-cyclodextrins (βCDs) by grafting alkyl chains on the primary and/or secondary face yields derivatives (βCD-C10) able to self-organize under nanoprecipitating conditions into nanoparticles (βCD-C10-NP) potentially useful for drug delivery. The co-nanoprecipitation of βCD-C10 with polyethylene glycol (PEG) chains yields PEGylated NPs (βCD-C10-PEG-NP) with potentially improved stealthiness. The objectives of the present study were to characterize the in vivo biodistribution of βCD-C10-PEG-NP with PEG chain length of 2000 and 5000Da using nuclear imaging, and to preliminarily evaluate the in vivo acute and extended acute toxicity of the most suitable system., Research Design and Methods: The in vivo and ex vivo biodistribution features of naked and decorated nanoparticles were investigated over time following intravenous injection of 125 I-radiolabeled nanoparticles to mice. The potential toxicity of PEGylated βCD-C10 nanosuspensions was evaluated in a preliminary in vivo toxicity study involving blood assays and tissue histology following repeated intraperitoneal injections of nanoparticles to healthy mice., Results: The results indicated that βCD-C10-PEG 5000 -NP presented increased stealthiness with decreased in vivo elimination and increased blood kinetics without inducing blood, kidney, spleen, and liver acute and extended acute toxicity., Conclusions: βCD-C10-PEG 5000 -NPs are stealth and safe systems with potential for drug delivery., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The inline coupling of the field-amplified sample injection (FASI) to Taylor dispersion analysis (TDA) was used to characterize low-UV absorbing carboxylated silica nanoparticles (cNPs). The hydrodynamic diameters (D h ) were measured by using a commercial capillary electrophoresis instrument. The proposed methodology did not require any complicated instruments or chromophoric dye to increase the detection sensitivity. A practical method based on a half-Gaussian fitting was proposed for the data processing. The results obtained by this method were compared with those derived from dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. From these results, it appeared that the size derived by TDA is in excellent agreement with those measured by DLS and TEM, as demonstrated by stable nanoparticles with narrow size distributions. Intermediate precision relative standard deviations less than 5% were obtained by FASI-TDA. The effect of the FASI-induced cNP peak dispersion on the reliability of the results was discussed in detail.

New α(1→2) or α(1→3) branched dextrans with high molar masses and controlled architecture were synthesized using a dextransucrase and branching sucrases. Their molecular structure, solubility, conformation, film-forming ability, as well as their thermal and mechanical properties were determined. These new dextrans present structures with low densities from 9,500 to 14,000gm -3 in H 2 O/DMSO medium, their molar mass, size and dispersity increase with increasing branching degree (weight-average molar mass up to 10 9 gmol -1 and radius of gyration around 500nm). Dextrans exhibit a glass transition between 40.5 and 63.2°C for water content varying from 12.2 to 14.1%. The effect of branching is mainly observed on the ability of dextran to crystallize. They have a good film-forming ability with a storage modulus which varies from 2 to 4GPa within a relative humidity range of 10-50%., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

This work aimed at preparing new nanoscale assemblies based on an amphiphilic bio-esterified β-cyclodextrin (β-CD), substituted at the secondary face with n-decanoic fatty acid chains (β-CD-C 10 ), and monoolein (MO) as new carriers for parenteral drug delivery. Stable binary (β-CD-C 10 /MO) and ternary (β-CD-C 10 /MO/stabilizer) nanoscale assemblies close to 100nm in size were successfully prepared in water by the solvent displacement method. The generated nanoparticles were fully characterized by dynamic light scattering, transmission electron microscopy, small-angle X-ray scattering, residual solvent analysis, complement activation and the contribution of each formulation parameter was determined by principal component analysis. The β-CD-C 10 units were shown to self-organize into nanoparticles with a hexagonal supramolecular packing that was significantly modulated by the molar ratio of the constituents and the presence of a steric or electrostatic stabilizer (DOPE-PEG 2000 or DOPA/POPA, respectively). Indeed, nanoparticles differing in morphology and in hexagonal lattice parameters were obtained while the co-existence of multiple mesophases was observed in some formulations, in particular for the β-CD-C 10 /MO/DOPA and β-CD-C 10 /MO/POPA systems. The mixed β-CD-C 10 /MO/DOPE-PEG 2000 nanoparticles (49:49:2 in mol%) appeared to be the most suitable for use as a drug delivery system since they contained a very low amount of residual solvent and showed a low level of complement C3 activation., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The interaction of 1,2 dioleolyl-sn-glycero-3-phosphatidylcholine (DOPC) vesicles with cellulose nanocrystals (CNCs) using several complementary techniques. Dynamic light scattering, zeta-potential, cryo-transmission electron microscopy and isothermal titration calorimetry (ITC) analyses confirmed the formation of pH-dependent CNC-liposome complexes. ITC was used to characterize the thermodynamic properties of this interaction. Positive values of enthalpy were found at pH lower than 5 where the charge sign of the constituents was opposite. The association was more pronounced at lower pH, as indicated by the higher values of association constant. We suggest that the positive enthalpy is derived from the release of counterions from the particle hydration shell during the association and that the charge of the vesicles plays a significant role in this interaction.