Search

In this paper, two transgenic wheat lines, PC27 and PC51, containing the maize PEPC gene and its wild-type (WT) were used as experimental material to study the effects of high temperature on their photosynthetic physiological characteristics and metabolome. The results showed that transgenic wheat lines had higher photosynthetic rate ( P ) than WT under non-stress treatment (NT) and high temperature stress treatment (HT), and more significantly under HT. The change trends of F / F , Ф , and q were similar to P , whereas that of non-photochemical quenching (NPQ) was the opposite. Compared with WT, no differences in chlorophyll content between the transgenic wheat and WT were observed under NT, but two transgenic lines had relatively higher contents than WT under HT. The change trends of Chlorophyll a/b radio, the decreased values of F , W, and V, and the activity of the antioxidant enzyme were consistent with the chlorophyll content. Compared with WT, transgenic wheat lines exhibited lower rate of superoxide anion production, HO and malondialdehyde content under HT, and no significant differences were observed under NT. The expression pattern of the ZmPEPC gene and wheat endogenous photosynthesis-related genes were in agreement with that of P . Compared with WT, about 13 different metabolites including one organic acid, six amino acids, four sugars, and two polyols were identified under NT; 25 different metabolites including six organic acids, 12 amino acids, four sugars, and three polyols were identified under HT. Collectively, our results indicate that ZmPEPC gene can enhance photochemical and antioxidant enzyme activity, upregulate the expression of photosynthesis-related genes, delay degradation of chlorophyll, change contents of proline and other metabolites in wheat, and ultimately improves its heat tolerance. [ABSTRACT FROM AUTHOR]

To provide molecular‐scale insight into the structural evolution from tris(methylamino)borane to boron nitride (BN) fiber during the chemical thermal‐treating process, polymeric green fiber is cured in hot synthetic air at 300°C and then treats to 400, 600, 800, and 1000°C in ammonia. The chemical composition and structure of the volatile compounds and residual products are analyzed during the pyrolysis process for the polymeric green fiber. It is demonstrated that oxygen can be used to cure polymeric green fiber rapidly under the premise of ensuring a final fiber content of less than 1 wt% carbon and 2 wt% oxygen while maintaining the fiber tensile strength at 1000°C. The molecular structure evolution during the pyrolysis process for polymeric green fiber after oxygen curing is determined. Specifically, in hot synthetic air, introducing oxygen and releasing methylamine generates a B–O six‐membered ring structure in the polymer in the first stage. Then, the removal of methyl results in the formation of a B–N–O network in hot ammonia. Afterward, nitridation of the B–O six‐membered ring promotes the evolution of the B–N six‐membered ring structure with the release of water and carbon dioxide. Finally, the growth and rearrangement of the BN structure are achieved. [ABSTRACT FROM AUTHOR]

To explore the possible novel microRNA (miRNA) regulatory pathways in Zhengmai 1860, a newly cultivated drought-tolerant wheat (Triticum aestivum L.) cultivar, miRNA transcriptome sequencing of the flag leaves of Zhengmai 1860, drought-sensitive variety Zhoumai 18, and drought-resistant variety Bainong 207 was performed during the grain filling stage. We also observed changes in the chloroplast ultrastructure, phytohormone levels, and antioxidant- and photosynthesis-related physiological indicators in three wheat varieties. The results showed that the flag leaves of the drought-tolerant variety Zhengmai 1860 had higher chlorophyll contents and net photosynthetic rates than those of Zhoumai 18 under drought stress during the grain filling stage; in addition, the chloroplast structure was more complete. However, there was no significant difference between Zhengmai 1860 and Bainong 207. MiRNA transcriptome analysis revealed that the differential expression of the miRNAs and mRNAs exhibited variable specificity. The KEGG pathway enrichment results indicated that most of the genes were enriched in the MAPK signaling pathway, plant hormone signal transduction, photosynthetic antennae protein, and amino acid and carbohydrate metabolism. In the drought-tolerant cultivar Zhengmai 1860, tae-miR408 was targeted to regulate the allene oxide synthase (AOS) gene, inhibit its expression, reduce the AOS content, and decrease the synthesis of jasmonic acid (JA) and abscisic acid (ABA). The results of this study suggest that Zhengmai 1860 could improve the photosynthetic performance of flag leaves by inhibiting the expression of genes involved in the JA pathway through miRNAs under drought conditions. Moreover, multiple miRNAs may target chlorophyll, antioxidant enzymes, phytohormone signal transduction, and other related pathways; thus, it is possible to provide a more theoretical basis for wheat molecular breeding. [ABSTRACT FROM AUTHOR]

Background: Nitrogen use efficiency (NUE) is closely related to crop yield and nitrogen fertilizer application rate. Although NUE is susceptible to environments, quantitative trait nucleotides (QTNs) for NUE in wheat germplasm populations have been rarely reported in genome-wide associated study. Results: In this study, 244 wheat accessions were phenotyped by three NUE-related traits in three environments and genotyped by 203,224 SNPs. All the phenotypes for each trait were used to associate with all the genotypes of these SNP markers for identifying QTNs and QTN-by-environment interactions via 3VmrMLM. Among 279 QTNs and one QTN-by-environment interaction for low nitrogen tolerance, 33 were stably identified, especially, one large QTN (r2 > 10%), qPHR3A.2, was newly identified for plant height ratio in one environment and multi-environment joint analysis. Among 52 genes around qPHR3A.2, four genes (TraesCS3A01G101900, TraesCS3A01G102200, TraesCS3A01G104100, and TraesCS3A01G105400) were found to be differentially expressed in low-nitrogen-tolerant wheat genotypes, while TaCLH2 (TraesCS3A01G101900) was putatively involved in porphyrin metabolism in KEGG enrichment analyses. Conclusions: This study identified valuable candidate gene for low-N-tolerant wheat breeding and provides new insights into the genetic basis of low N tolerance in wheat. [ABSTRACT FROM AUTHOR]

Lack of potassium in soil limits crop yield. Increasing yield and conserving potassium ore requires improving K use efficiency (KUE). Many genes influence KUE in plants, but it is not clear how these genes function in the field. We identified the V-type H+-pyrophosphatase gene EdVP1 from Elymus dahurica. Gene expression analysis showed that EdVP1 was induced by low potassium stress. Protein subcellular localization analysis demonstrated that EdVP1 localized on the plasma membrane. We overexpressed EdVP1 in two wheat varieties and conducted K tolerance experiments across years. Yield per plant, grain number per spike, plant height, and K uptake of four transgenic wheat lines increased significantly compared with WT; results from two consecutive years showed that EdVP1 significantly increased yield and KUE of transgenic wheat. Pot experiments showed that transgenic plants had significantly longer shoots and roots, and higher K accumulation in shoots and roots and H+-PPase activity in shoots than WT under low K. A fluidity assay of potassium ion in EdVP1 transgenic plant roots showed that potassium ion influx and H+ outflow in transgenic plants were higher than WT. Overexpressing EdVP1 significantly improved yield and KUE of transgenic wheat and was related to higher K uptake capacity in root. [ABSTRACT FROM AUTHOR]

Psb28 is a soluble protein in the photosystem II (PSII) complex, but its role in the drought stress response of wheat remains unclear. Here, we functionally characterized the TaPsb28 gene, which positively regulates drought tolerance in wheat. When the full-length 546-bp TaPsb28 cDNA was transferred into Arabidopsis thaliana, it was located in the guard cell chloroplast around the stroma. Overexpression of TaPsb28 conferred drought tolerance, as exhibited by the increases in the survival rate. Transgenic plants maintained lower MDA content and higher chlorophyll content by inducing chlorophyll synthase (ChlG) gene transcription. The content of abscisic acid (ABA) and zeatin increased significantly in wild-type (WT) plants under drought stress, and the transcriptional expression levels of RD22, dihydroflavonol 4-reductase (DFR) and anthocyanin reductase (ANR) genes were induced, thus enhancing the contents of endogenous cyanidin, delphinidin, and proanthocyanidins. However, in transgenic plants, although anthocyanins were further aggregated, the ABA increase was inhibited, zeatin was restored to the control level under drought stress, and stomatal closure was promoted. These findings indicate ABA and zeatin have opposite synergistic effects in the process of drought tolerance caused by TaPsb28 because only after the effect of zeatin is alleviated can ABA better play its role in promoting anthocyanin accumulation and stomatal closure, thus enhancing the drought tolerance of transgenic plants. The results suggest that overexpression of TaPsb28 exerts a positive role in the drought response by influencing the functional metabolism of endogenous hormones. The understanding acquired through the research laid a foundation for further in-depth investigation of the function of TaPsb28 in drought resistance in wheat, especially its relationship with anthocyanidin accumulation. [ABSTRACT FROM AUTHOR]

[Display omitted] • First report on h-BN doped β-MnO 2 nanobelts composite for supercapacitors. • The agglomeration behavior was improved by doping the gauze-like h-BN. • The h-BN/β-MnO 2 composite electrode possesses 578.4 F g−1 at 0.36 A g−1. • 97.1% capacitance retention even after 5000 cycles. The electrochemical performance of MnO 2 electrode material is limited by its poor electrical conductivity and cationic-protonic diffusion. In this work, we introduce the preparation of a novel h-BN/β-MnO 2 nanocomposite as superior electrode materials for extremely promising supercapacitors. The phase, surface morphologies and the internal atomic structures of the nanocomposite were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The electrochemical performance including cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) and electrochemical impedance spectroscopy (EIS) was conducted under three-electrode system. The h-BN doped β-MnO 2 nanobelts composite electrode displayed a specific capacitance of 578.4F g−1 at a current density of 0.5 mA cm−2 (∼0.36 A g−1) and retained nearly 97.1 % capacitance even after 5000 cycles. [ABSTRACT FROM AUTHOR]

Oryza sativa PHOSPHATE RESPONSE2 (OsPHR2) can promote the uptake and use of phosphorus (P) in rice. We introduced OsPHR2 into the winter wheat (Triticum aestivum L.) variety "Zhengmai0856." OsPHR2 was integrated into the wheat genome with two copy numbers and could be correctly transcribed and expressed. OsPHR2 was mainly expressed in the leaves at the seedling stage. From the jointing to filling stage, OsPHR2 was mainly expressed in the roots, followed by the leaves, with a low expression level in detected the tassels and stems. The transgenic lines exhibited higher P accumulation at each growth stage and increased P uptake intensity in comparison to the wild type under low P and high P conditions. Analysis of the root characteristics showed that the transgenic expression of OsPHR2 increased the maximum root length, total root length, root-to-shoot ratio, and root volume under the conditions of P deficiency or low P. A field experiment showed that the transgenic lines had a higher grain yield than the wild type under low P and high P conditions. The yield of the transgenic lines increased by 6.29% and 3.73% on average compared with the wild type under low P and high P conditions, respectively. Thus, the transgenic expression of OsPHR2 could increase P uptake and yield in wheat, but the effect was more prominent under low P conditions. [ABSTRACT FROM AUTHOR]

Summary: Genetically enhancing drought tolerance and nutrient use efficacy enables sustainable and stable wheat production in drought‐prone areas exposed to water shortages and low soil fertility, due to global warming and declining natural resources. In this study, wheat plants, exhibiting improved drought tolerance and N‐use efficacy, were developed by introducing GmTDN1, a gene encoding a DREB‐like transcription factor, into two modern winter wheat varieties, cv Shi4185 and Jimai22. Overexpressing GmTDN1 in wheat resulted in significantly improved drought and low‐N tolerance under drought and N‐deficient conditions in the greenhouse. Field trials conducted at three different locations over a period of 2–3 consecutive years showed that both Shi4185 and Jimai22 GmTDN1 transgenic lines were agronomically superior to wild‐type plants, and produced significantly higher yields under both drought and N‐deficient conditions. No yield penalties were observed in these transgenic lines under normal well irrigation conditions. Overexpressing GmTDN1 enhanced photosynthetic and osmotic adjustment capacity, antioxidant metabolism, and root mass of wheat plants, compared to those of wild‐type plants, by orchestrating the expression of a set of drought stress‐related genes as well as the nitrate transporter, NRT2.5. Furthermore, transgenic wheat with overexpressed NRT2.5 can improve drought tolerance and nitrogen (N) absorption, suggesting that improving N absorption in GmTDN1 transgenic wheat may contribute to drought tolerance. These findings may lead to the development of new methodologies with the capacity to simultaneously improve drought tolerance and N‐use efficacy in cereal crops to ensure sustainable agriculture and global food security. [ABSTRACT FROM AUTHOR]

• The effect of size on molecular dynamics simulation results are considered. • Tensile and shear properties of amorphous silicon nitride with different densities calculated using molecular dynamics simulations. • The empirical equation between mechanical properties (Young's modulus, shear modulus, tensile strength, and shear strength) and density of amorphous silicon nitride is established. Silicon nitride fiber is among the most popular candidates for high-temperature wave-transparent ceramic matrix composites (CMC) in aerospace engineering, and the measurement of its mechanical properties has always been the focus of researchers. In this paper, a simple and effective molecular dynamics method is used to generate molecular dynamics models of amorphous silicon nitride (a -Si 3 N 4) materials with different densities, and it is verified that the developed models reflect the microstructure of the fiber. Based on analyzing the effects of size on the results, tensile and shear simulations are carried out to obtain the mechanical properties of the models with different densities. According to the research data obtained, the empirical equation between mechanical properties (Young's modulus, shear modulus, tensile strength, and shear strength) and density of fiber is established, and validated by the published experimental results. The empirical equation can not only predict the mechanical properties of fibers directly from the density but also provide a new way to measure the mechanical properties of fibers nondestructively. [Display omitted] [ABSTRACT FROM AUTHOR]

Objective: Hypertension requires continuous and long‐term care to prevent associated complications. Chronic disease management mode (CDMM) was developed to improve patients' self‐management. We aimed to evaluate quality of care and clinical outcomes of CDMM versus routine care. Methods: 300 patients aged >30 years with primary hypertension were randomly allocated to the CDMM intervention group (n = 162) or the usual care control group (n = 138). CDMM comprised nursing consultations, telephone contact, online WeChat link, health education, and appropriate referrals during hospitalisation and after discharge. QLICD‐HY (V 2.0) scale was used to evaluate the quality of life. Care outcomes were biochemical parameters, body mass index, blood pressure levels, waist circumference, psychological indicators and quality of life assessed on admission (baseline) and one month post‐care for both groups. Data were collected and analysed using SPSS 20.0. Results: After one month, the intervention group had 6 mm Hg (95% CI: −5.12 to −9.08) lower SBP and 0.6 mM/L (95% CI: −0.52 to −0.68) lower LDL than the control group. In terms of improvements in BMI, UmAlb or waist circumference, there were no differences between both groups. The intervention group scored better on psychological indicators than controls (P < 0.05), and scores reflecting social and psychological function in the intervention group were significantly higher than scores at baseline, and higher than scores of controls after one month (P < 0.05). In the control group, there was no statistically significant difference between the scores at baseline and after one month. Conclusions: Under CDMM hypertension care, improvement of blood pressure and LDL was clinically significant. Intervention care further improves social and psychological function among participants with primary hypertension. [ABSTRACT FROM AUTHOR]

Oxygen plays a crucial role in the synthesis of boron nitride (BN) and the preparation of BN ceramics. The effects of oxygen content on the microstructure and properties of BN fibers treated at 1600 °C have not been studied yet. In this work, polymer-derived BN fibers are cured at 300 °C under oxygen and pyrolyzed at 600 °C, 700 °C and 800 °C under ammonia as the pre-heated BN fibers. Then, these pre-heated BN fibers are treated at 1600 °C under nitrogen as the final BN fibers. The compositions and microstructures of the pre-heated and final BN fibers are investigated. As the pre-heated temperature increases, the oxygen contents of the pre-heated BN fibers decrease to 24 wt%, 17 wt% and 5 wt%, respectively. The structures of the pre-heated BN fibers transform from amorphous BN to turbostratic BN. The oxygen in the pre-heated BN fiber volatilizes as boron oxide during treatment at 1600 °C, promoting the formation and growth of h-BN in the final BN fiber, with the maximum grain size reaching 74 × 20 nm (La × Lc). As the grain size of the final BN fiber increases, the Young's modulus, density and oxidation resistance level of the BN fiber improve, and the dielectric properties decrease. The final BN fiber that underwent pre-heating at 700 °C has the best comprehensive properties, with a tensile strength of 1.11 GPa and a Young's modulus of 265 GPa. This study researches the relationship between composition, structure and performance, and provides a scientific basis for the preparation process of BN fibers. • The initial BN fibers with gradient oxygen content are obtained by controlling the nitridation temperature after air curing. • The higher the oxygen content in the initial BN fibers, the better the crystallinity of the BN fibers treating at 1600 °C. • The tensile strength of BN fiber with a grain size of 34 × 11 nm (La × Lc) is 1.11 GPa, and the Young's modulus is 265 GPa. [ABSTRACT FROM AUTHOR]

This study assessed the effects of seven combinations of maize (Zea mays) genes phosphoenolpyruvate carboxylase (pepc), pyruvate phosphate dikinase (ppdk), and NADP-malic enzyme (nadp-me), on the photosynthesis of Arabidopsis. The photosynthetic rate, carboxylation efficiency, and shoot-dry-weight of Zmpepc (PC), Zmpepc + Zmppdk (PCK), Zmpepc + Zmnadp-me (PCM), and Zmpepc + Zmppdk + Zmnadp-me (PCKM) were significantly higher than those of the control wild-type (WT), with a trends to be PCKM > PCK > PC and PCM > WT. This indicated that Zmpepc was a prerequisite for improved photosynthetic performance; Zmppdk had a positive effect on Zmpepc , and the triple gene combination had the most significant synergistic effects. PCKM significantly enhanced activity of photosystem (PS)II (K, J phase) and PSI, light energy absorption (ABS/CSm) and conversion (TRo/ABS), and electron transfer (ETo/TRo). PCKM up-regulated 18 photosynthesis-related proteins, among which, 11 were involved in light reaction resulting in improved light-energy absorption and conversion efficiency, electron transfer, activity and stability of PSII and PSI, and the ATP and NADPH production. The remaining seven proteins were involved in dark reaction. The up-regulation of these proteins in PCKM improved the coordinated operation of light and dark reaction, increasing the photosynthesis and dry weight ultimately. These results also provide a promising strategy for the genetic improvement of the photosynthetic performance of C 3 crops by inserting major C 4 photosynthetic genes. • Arabidopsis was transformed with C 4 plant genes (Zmpepc , Zmppdk and Zmnadp-me). • Joint expression of the three C 4 plant genes significantly enhanced photosynthesis. • Eighteen proteins involved in photosynthetic process were up-regulated. • The light-energy absorption, conversion and CO 2 assimilation were all improved. • The overproduction of the metabolites of C 4 process may work as signals. [ABSTRACT FROM AUTHOR]

Wheat is one of the staple food crops worldwide and breeding for high yield wheat is critical to meet the need of increasing world population. To determine the factors that limit wheat yield potential in Henan province, China, 30 wheat cultivars that have been widely grown in Henan province since 1940s were evaluated for grain yield and related physiological traits. The results show that grain yield has been significantly increased since 1940s, with an annual genetic gain of 1.09%, and the increased yield after 1900s was attributed to the introduction of 1BL/1RS translocation. The significant yield increase mainly resulted from a significant increase in grain number per spike (GNPS), thousand kernel weight (TKW) and harvest index (HI), and a significant decrease in plant height due to utilization of semi-dwarfing genes. The genetic improvement of assimilate accumulation and translocation was mainly reflected by the improvement in post-anthesis assimilate accumulation (PoAAA) and post-anthesis transportion rate (PoATR) of pre-anthesis assimilates (PrAA), with genetic gains of 0.63% and 1.89%, respectively. The improvement of the PoAAA was closely related to an increase in net photosynthetic rates ( P n ) of flag leaves at anthesis and 20 days after anthesis, and leaf area index (LAI) at 20 days after anthesis; whereas the improvement of the PoATR of the PrAA was closely associated with the improvement of accumulation and redistribution of the assimilates accumulated in stems and sheaths. As yield increased, the source-sink ratio significantly decreased, reflecting that the source has been gradually becoming a limiting factor to grain yield increase. Therefore, diverse strategies should be adopted to improve biomass (source) in future wheat breeding to meet the need of continuous increasing in wheat yield. [ABSTRACT FROM AUTHOR]

Lodging is one of the most important factors that reduce wheat grain yields. To improve lodging resistance, increasing the strength of wheat stems has been an important breeding objective. To assess the rate of genetic improvement of the character, 30 wheat accessions, varying from landraces to cultivars that have been widely grown in Henan Province, China during the last 70 years, were tested for several parameters of lodging resistance in a two-year experiment. Stem strength, morphological and anatomical traits, and chemical composition were measured. The results showed that stem strength, both at anthesis and 25 days thereafter, has increased significantly during this period with average annual genetic gains of 1.07 and 0.87 %, respectively. Compared with older wheat cultivars, stem walls of modern cultivars are thicker, and the lignin content is higher. Grain yield has been significantly increased over the last 70 years, and the results of multiple regression analysis indicated that the genetic improvement of grain yield was associated with the increase in stem strength and the decrease in plant height. [ABSTRACT FROM AUTHOR]

Enhancing drought tolerance of crops has been a great challenge in crop improvement. Here, we report the maize phosphoenolpyruvate carboxylase ( PEPC) gene was able to confer drought tolerance and increase grain yield in transgenic wheat ( Triticum aestivum L.) plants. The improved of drought tolerance was associated with higher levels of proline, soluble sugar, soluble protein, and higher water use efficiency. The transgenic wheat plants had also a more extensive root system as well as increased photosynthetic capacity during stress treatments. The increased grain yield of the transgenic wheat was contributed by improved biomass, larger spike and grain numbers, and heavier 1000-grain weight under drought-stress conditions. Under non-stressed conditions, there were no significant increases in these of the measured traits except for photosynthetic rate when compared with parental wheat. Proteomic research showed that the expression levels of some proteins, including chlorophyll A-B binding protein and pyruvate, phosphate dikinase, which are related to photosynthesis, PAP fibrillin, which is involved in cytoskeleton synthesis, S-adenosylmethionine synthetase, which catalyzes methionine synthesis, were induced in the transgenic wheat under drought stress. Additionally, the expression of glutamine synthetase, which is involved in ammonia assimilation, was induced by drought stress in the wheat. Our study shows that PEPC can improve both stress tolerance and grain yield in wheat, demonstrating the efficacy of PEPC in crop improvement. [ABSTRACT FROM AUTHOR]

Using particle bombardment transformation, we introduced maize pepc cDNA encoding phosphoenolpyruvate carboxylase (PEPC) and ppdk cDNA encoding pyruvate orthophosphate dikinase (PPDK) into the C crop wheat to generate transgenic wheat lines carrying cDNA of pepc (PC lines), ppdk (PK lines) or both (PKC lines). The integration, transcription, and expression of the foreign genes were confirmed by Southern blot, Real-time quantitative reverse transcription PCR (Q-RT-PCR), and Western blot analysis. Q-RT-PCR results indicated that the average relative expression levels of pepc and ppdk in the PKC lines reached 10 and 4.6, respectively, compared to their expressions in untransformed plants (set to 1). The enzyme activities of PEPC and PPDK in the PKC lines were 4.3- and 2.1-fold higher, respectively, than in the untransformed control. The maximum daily net photosynthetic rates of the PKC, PC, and PK lines were enhanced by 26.4, 13.3, and 4.5 %, respectively, whereas the diurnal accumulations of photosynthesis were 21.3, 13.9, and 6.9 %, respectively, higher than in the control. The F/F of the transgenic plants decreased less than in the control under high temperature and high light conditions (2 weeks after anthesis), suggesting that the transgenic wheat transports more absorbed light energy into a photochemical reaction. The exogenous maize C-specific pepc gene was more effective than ppdk at improving the photosynthetic performance and yield characteristics of transgenic wheat, while the two genes showed a synergistic effect when they were transformed into the same genetic background, because the PKC lines exhibited improved photosynthetic and physiological traits. [ABSTRACT FROM AUTHOR]

With 7 figures and 2 tables Abstract Attempts have been made to transform C3 crops with C4 genes to improve the photosynthetic rate of C3 plants. In our study, a full-length cDNA for phosphoenolpyruvate carboxylase gene ( pepc) was isolated from Zea mays by PCR. The pepc gene was introduced into wheat plants ( Triticum aestivum) by particle bombardment transformation. The integration, transcription and expression of the pepc gene were confirmed by Southern blot, RT-PCR and Western blot analysis. Physiological studies showed that phosphoenolpyruvate carboxylase activity in the transgenic plants was 140% higher than that of the untransformed plants. The highest rate of photosynthesis in the transgenic plants was 31.95 μmol CO2/m2/s, which was 26% greater than the rate in untransformed plants. The light saturation point and carboxylation efficiency of pepc transgenic wheat were 20% and 22.57% higher, respectively, than those of untransformed wheat. As a result, the weight of seed per spike and thousand-grain weight were 0.23 g and 1.21 g higher than those of untransformed wheat. Our research will facilitate the further study of the function of the pepc gene in wheat plants. [ABSTRACT FROM AUTHOR]

• A simple and efficient method for generating and characterizing the microstructure of a -BN is proposed based on the classical molecular dynamics simulation. • Various densities and microstructures of a -BN could be successfully generated, which is mainly composed of the B 3 N 3 hexagonal ring. • High-density a -BN obtained from either high annealing temperature or high initial density, possesses high Young's modulus and fracture strength. • During the tensile process, the micro-voids in high-density of a -BN gradually undergoes expansion, elongation, mergence stages, and the fracture of a -BN. In this paper, a simple and effective strategy for generating the microstructure of a -BN is firstly proposed based on classical molecular dynamics methods, and then is validated by characterizing the microstructure. The characterization analysis show that: i) a -BN with different densities and microstructures could be successfully generated mainly composed of the B 3 N 3 hexagonal ring; ii) a- BN constructed by the combinations of the basic structural units with small size is more reasonable; iii) high-density a -BN, obtained at either high annealing temperature or high initial density, has discretely distributed micro-voids with larger scattering size distribution. The microstructure of the generated a- BN is subjected to tensile loading simulation, and the results showed the Young's modulus and fracture strength increase with increasing annealing temperature or initial density. During the tensile process, the micro-voids in high-density of a -BN gradually undergoes expansion, elongation, and mergence stages, and the ultimate fracture of a -BN. [ABSTRACT FROM AUTHOR]

• The influence of various factors on mechanical properties of h -BNNS are systematically investigated via classical MD simulations. • The effect of temperature and the ratio of circular-region radius to nanoindenter radius are greater than other factors. • Failure mechanism of mono-layer h -BNNS starts with discrete point defects, gradually expands and merges to form hole defects, and causes structural fracture. • Fracture mode of multi-layer h -BNNS will translate from the bottom-top failure to the top–bottom failure accompanying with increasing thickness. Hexagonal boron nitride nanosheets (h -BNNS) is one kind of promising 2D materials due to its outstanding mechanical properties especially at elevated temperature. However, the experimentally measured mechanical properties of h -BNNS have great dispersions due to the intricate experimental measurement conditions. In the present study, the classical molecular dynamics simulations are performed to study the effect of various experimental factors on the mechanical properties of h -BNNS based on nanoindentation, including: size, temperature, loading rate of nanoindenter, ratio of circular-region radius to nanoindenter radius, and thickness (the number of layers). Meanwhile, the evolution of microstructure of h -BNNS up to fracture are investigated to elucidate its fracture mechanism during nanoindentation process. The results indicate that the Young's modulus and fracture strength of h -BNNS gradually decreases with the increasing temperature, and the mechanical properties of h -BNNS remain relatively stable when the ratio of circular-region radius to nanoindenter radius and the circular-region radius is bigger than 10 and 18 nm, respectively. Based on the evolutionary process of the microstructure of h -BNNS, the results not only show the failure process of h -BNNS, but also reveal the conversion of the fracture mode in multi-layer h -BNNS, that is, it will be translated from the bottom-top to the top–bottom fracture with increasing thickness. [ABSTRACT FROM AUTHOR]

A correction to the article "Drought tolerance and proteomics studies of transgenic wheat containing the maize C4 phosphoenolpyruvate carboxylase (PEPC) gene" is presented.