Search

Abstract As the core component of solid-state batteries, neither current inorganic solid-state electrolytes nor solid polymer electrolytes can simultaneously possess satisfactory ionic conductivity, electrode compatibility and processability. By incorporating efficient Li+ diffusion channels found in inorganic solid-state electrolytes and polar functional groups present in solid polymer electrolytes, it is conceivable to design inorganic-organic hybrid solid-state electrolytes to achieve true fusion and synergy in performance. Herein, we demonstrate that traditional metal coordination compounds can serve as exceptional Li+ ion conductors at room temperature through rational structural design. Specifically, we synthesize copper maleate hydrate nanoflakes via bottom-up self-assembly featuring highly-ordered 1D channels that are interconnected by Cu2+/Cu+ nodes and maleic acid ligands, alongside rich COO− groups and structural water within the channels. Benefiting from the combination of ion-hopping and coupling-dissociation mechanisms, Li+ ions can preferably transport through these channels rapidly. Thus, the Li+-implanted copper maleate hydrate solid-state electrolytes shows remarkable ionic conductivity (1.17 × 10−4 S cm−1 at room temperature), high Li+ transference number (0.77), and a 4.7 V-wide operating window. More impressively, Li+-implanted copper maleate hydrate solid-state electrolytes are demonstrated to have exceptional compatibility with both cathode and Li anode, enabling long-term stability of more than 800 cycles. This work brings new insight on exploring superior room-temperature ionic conductors based on metal coordination compounds.

Aqueous zinc ion batteries (AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources, low cost, high safety, and environmental friendliness. Although the advanced electrochemical energy storage systems based on zinc ion batteries have been greatly developed, many severe problems associated with Zn anode impede its practical application, such as the dendrite formation, hydrogen evolution, corrosion and passivation phenomenon. To address these drawbacks, electrolytes, separators, zinc alloys, interfacial modification and structural design of Zn anode have been employed at present by scientists. Among them, the structural design for zinc anode is relatively mature, which is generally believed to enhance the electroactive surface area of zinc anode, reduce local current density, and promote the uniform distribution of zinc ions on the surface of anode. In order to explore new research directions, it is crucial to systematically summarize the structural design of anode materials. Herein, this review focuses on the challenges in Zn anode, modification strategies and the three-dimensional (3D) structure design of substrate materials for Zn anode including carbon substrate materials, metal substrate materials and other substrate materials. Finally, future directions and perspectives about the Zn anode are presented for developing high-performance AZIBs.

Highlights The process of machine learning is introduced in detail. Recent developments in machine learning for low-dimensional electrocatalysts are briefly reviewed. Future directions and perspectives for machine learning in hydrogen evolution reaction are critically discussed.

Abstract Silicon (Si)‐based solid‐state batteries (Si‐SSBs) are attracting tremendous attention because of their high energy density and unprecedented safety, making them become promising candidates for next‐generation energy storage systems. Nevertheless, the commercialization of Si‐SSBs is significantly impeded by enormous challenges including large volume variation, severe interfacial problems, elusive fundamental mechanisms, and unsatisfied electrochemical performance. Besides, some unknown electrochemical processes in Si‐based anode, solid‐state electrolytes (SSEs), and Si‐based anode/SSE interfaces are still needed to be explored, while an in‐depth understanding of solid–solid interfacial chemistry is insufficient in Si‐SSBs. This review aims to summarize the current scientific and technological advances and insights into tackling challenges to promote the deployment of Si‐SSBs. First, the differences between various conventional liquid electrolyte‐dominated Si‐based lithium‐ion batteries (LIBs) with Si‐SSBs are discussed. Subsequently, the interfacial mechanical contact model, chemical reaction properties, and charge transfer kinetics (mechanical–chemical kinetics) between Si‐based anode and three different SSEs (inorganic (oxides) SSEs, organic–inorganic composite SSEs, and inorganic (sulfides) SSEs) are systemically reviewed, respectively. Moreover, the progress for promising inorganic (sulfides) SSE‐based Si‐SSBs on the aspects of electrode constitution, three‐dimensional structured electrodes, and external stack pressure is highlighted, respectively. Finally, future research directions and prospects in the development of Si‐SSBs are proposed.

Ultra-thick, dense alloy-type anodes are promising for achieving large areal and volumetric performance in potassium-ion batteries (PIBs), but severe volume expansion as well as sluggish ion and electron diffusion kinetics heavily impede their widespread application. Herein, we design highly dense (3.1 ​g ​cm−3) Ti3C2Tx MXene and graphene dual-encapsulated nano-Sb monolith architectures (HD-Sb@Ti3C2Tx-G) with high-conductivity elastic networks (1560 ​S ​m−1) and compact dually encapsulated structures, which exhibit a large volumetric capacity of 1780.2 ​mAh cm−3 (gravimetric capacity: 565.0 ​mAh g−1), a long-term stable lifespan of 500 cycles with 82% retention, and a large areal capacity of 8.6 ​mAh cm−2 (loading: 31 ​mg ​cm−2) in PIBs. Using ex-situ SEM, in-situ TEM, kinetic investigations, and theoretical calculations, we reveal that the excellent areal and volumetric performance mechanism stems from the three dimensional (3D) high-conductivity elastic networks and the dual-encapsulated Sb architecture of Ti3C2Tx and graphene; these effectively mitigate against volume expansion and the pulverization of Sb, offering good electrolyte penetration and rapid ionic/electronic transmission. Ti3C2Tx also decreases the K+ diffusion energy barrier, and the ultra-thick compact electrode ensures volumetric and areal performance. These findings provide a feasible strategy for fabricating ultra-thick, dense alloy-type electrodes to achieve high areal and volumetric capacity energy storage via highly-dense, dual-encapsulated architectures with conductive elastic networks.

Abstract Potassium‐ion batteries (PIBs) are considered promising alternatives to lithium‐ion batteries owing to cost‐effective potassium resources and a suitable redox potential of −2.93 V (vs. −3.04 V for Li+/Li). However, the exploration of appropriate electrode materials with the correct size for reversibly accommodating large K+ ions presents a significant challenge. In addition, the reaction mechanisms and origins of enhanced performance remain elusive. Here, tetragonal FeSe nanoflakes of different sizes are designed to serve as an anode for PIBs, and their live and atomic‐scale potassiation/depotassiation mechanisms are revealed for the first time through in situ high‐resolution transmission electron microscopy. We found that FeSe undergoes two distinct structural evolutions, sequentially characterized by intercalation and conversion reactions, and the initial intercalation behavior is size‐dependent. Apparent expansion induced by the intercalation of K+ ions is observed in small‐sized FeSe nanoflakes, whereas unexpected cracks are formed along the direction of ionic diffusion in large‐sized nanoflakes. The significant stress generation and crack extension originating from the combined effect of mechanical and electrochemical interactions are elucidated by geometric phase analysis and finite‐element analysis. Despite the different intercalation behaviors, the formed products of Fe and K2Se after full potassiation can be converted back into the original FeSe phase upon depotassiation. In particular, small‐sized nanoflakes exhibit better cycling performance with well‐maintained structural integrity. This article presents the first successful demonstration of atomic‐scale visualization that can reveal size‐dependent potassiation dynamics. Moreover, it provides valuable guidelines for optimizing the dimensions of electrode materials for advanced PIBs.

Silicon is a promising anode material for lithium-ion batteries but experiences large volume changes during cycling. Here the authors report a scalable method to synthesize porous ant-nest-like silicons. The unique structure of this anode solves the swelling problem and enables impressive performance.

Abstract The two major limitations in the application of SnO2 for lithium-ion battery (LIB) anodes are the large volume variations of SnO2 during repeated lithiation/delithiation processes and a large irreversible capacity loss during the first cycle, which can lead to a rapid capacity fade and unsatisfactory initial Coulombic efficiency (ICE). To overcome these limitations, we developed composites of ultrafine SnO2 nanoparticles and in situ formed Co(CoSn) nanocrystals embedded in an N-doped carbon matrix using a Co-based metal–organic framework (ZIF-67). The formed Co additives and structural advantages of the carbon-confined SnO2/Co nanocomposite effectively inhibited Sn coarsening in the lithiated SnO2 and mitigated its structural degradation while facilitating fast electronic transport and facile ionic diffusion. As a result, the electrodes demonstrated high ICE (82.2%), outstanding rate capability (~ 800 mAh g−1 at a high current density of 5 A g−1), and long-term cycling stability (~ 760 mAh g−1 after 400 cycles at a current density of 0.5 A g−1). This study will be helpful in developing high-performance Si (Sn)-based oxide, Sn/Sb-based sulfide, or selenide electrodes for LIBs. In addition, some metal organic frameworks similar to ZIF-67 can also be used as composite templates.

Abstract Given the inherent features of open tunnel‐like pyrochlore crystal frameworks and pentavalent antimony species, polyantimonic acid (PAA) is an appealing conversion/alloying‐type anode material with fast solid‐phase ionic diffusion and multielectron reactions for lithium‐ion batteries. Yet, enhancing the electronic conductivity and structural stability are two key issues in exploiting high‐rate and long‐life PAA‐based electrodes. Herein, these challenges are addressed by engineering a novel multidimensional integrated architecture, which consists of 0D Mn‐substituted PAA nanocrystals embedded in 1D tubular graphene scrolls that are co‐assembled with 2D N‐doped graphene sheets. The integrated advantages of each subunit synergistically establish a robust and conductive 3D electrode framework with omnidirectional electron/ion transport network. Computational simulations combined with experiments reveal that the partial‐substitution of H3O+ by Mn2+ into the tunnel sites of PAA can regulate its electronic structure to narrow the bandgap with increased intrinsic electronic conductivity and reduce the Li+ diffusion barrier. All above merits enable improved reaction kinetics, adaptive volume expansion, and relieved dissolution of active Mn2+/Sb5+ species in the electrode materials, thus exhibiting ultrahigh rate capacity (238 mAh g−1 at 30.0 A g−1), superfast‐charging capability (fully charged with 56% initial capacity for ≈17 s at 80.0 A g−1) and durable cycling performance (over 1000 cycles).

The design of efficient and stable oxygen evolution catalysts has implications for water splitting and metal-air battery technology. Here, the authors fabricate double perovskite nanofibers and demonstrate the favourable effects of co-doping and nanostructuring on oxygen evolution performance.

Different zinc foils as anode current collectors by electrowinning in various electrolytes with additives were prepared, which were evaluated through X-ray diffraction (XRD), scanning electron microscopy (SEM), float charge, and Tafel curve tests. The effect of different cathode current collectors, electrolytes, and the as-prepared zinc foils as the anode on the coulombic efficiency and the cycling performance of aqueous batteries were investigated. The results indicate that the initial coulombic efficiency and discharge capacity of the battery with 1 mol/L ZnSO4 and 2 mol/L Li2SO4 are 94.31% and 105.7 mAh/g using graphite as the current collector, which are much higher than 68.20% and 71.0 mAh/g using conductive polyethylene, respectively, attributed to the smaller polarization and electrochemical transfer impedance (Rct) of the former. However, the capacity retention of the latter is much higher than that of the former, especially using the high-concentration-lithium-based hybrid electrolyte, of which it is up to 74.63% even after 500 cycles. Moreover, the cycling performance of a battery with as-prepared zinc foil adding thiourea and gelatin into electrolyte during electrowinning is much better than that without additives, which is due to the smaller corrosion rate and side reaction.

One of the crucial challenges for applying Sn as an anode of lithium-ion batteries (LIBs) is the dramatic volume change during lithiation/delithiation process, which causes a rapid capacity fading and then deteriorated battery performance. To address this issue, herein, we report the design and fabrication of Sn encapsulated carbon nanoboxes (denoted as Sn@C) with yolk@shell architectures. In this design, the carbon shell can facilitate the good transport kinetics whereas the hollow space between Sn and carbon shell can accommodate the volume variation during repeated charge/discharge process. Accordingly, this composite electrode exhibits a high reversible capacity of 675 mAh g−1 at a current density of 0.8 A g−1 after 500 cycles and preserves as high as 366 mAh g−1 at a higher current density of 3 A g−1 even after 930 cycles. The enhanced electrochemical performance can be ascribed to the crystal size reduction of Sn cores and the formation of polymeric gel-like layer outside the electrode surface after long-term cycles, resulting in improved capacity and enhanced rate performance.

The manipulation of stress in high-capacity microscale alloying anode materials, which undergo significant volumetric variation during cycling, is crucial prerequisite for improved their cycling capability. In this work, an innovative structural design strategy is proposed for scalable fabrication of a unique 3D highly porous micro structured germanium (Ge) featuring micro-nano hierarchical architecture as viable anode for high-performance lithium-ion batteries (LIBs). The resultant micro-sized Ge, consisting of interconnected nanoligaments and bicontinuous nanopores, is endowed with high activity, decreased Li+ diffusion distance and alleviated volume variation, appealing as an ideal platform for in-depth understanding the relationship between structural design and stress evolution. Such a micro-sized Ge being highly porous delivers a record high initial Coulombic efficiency of 92.5%, large volumetric capacity of 2,421 mAh cm-3 at 1.2 mA cm-2, exceptional rate capability (805.6 mAh g-1 at 10 Ag-11) and cycling stability (over 90% capacity retention after 1000 cycles even at 5 A g-1), largely outperforming the reported Ge-based anodes for LIBs. Furthermore, its underlying Li storage mechanism and stress dispersion behavior are explicitly revealed by combined substantial in situ/ex situ experimental characterizations and theoretical computation. This work provides novel insights into the rational design of high-performance and durable alloying anodes toward high-energy LIBs. [ABSTRACT FROM AUTHOR]