Search

Liquid argon time projection chamber technology is an attractive choice for large neutrino detectors, as it provides a high-resolution active target and it is expected to be scalable to very large masses. Consequently, it has been chosen as the technology for the first module of the DUNE far detector. However, the fiducial mass required for "far detectors" of the next generation of neutrino oscillation experiments far exceeds what has been demonstrated so far. Scaling to this larger mass, as well as the requirement for underground construction places a number of additional constraints on the design. A prototype 35-ton cryostat was built at Fermi National Acccelerator Laboratory to test the functionality of the components foreseen to be used in a very large far detector. The Phase I run, completed in early 2014, demonstrated that liquid argon could be maintained at sufficient purity in a membrane cryostat. A time projection chamber was installed for the Phase II run, which collected data in February and March of 2016. The Phase II run was a test of the modular anode plane assemblies with wrapped wires, cold readout electronics, and integrated photon detection systems. While the details of the design do not match exactly those chosen for the DUNE far detector, the 35-ton TPC prototype is a demonstration of the functionality of the basic components. Measurements are performed using the Phase II data to extract signal and noise characteristics and to align the detector components. A measurement of the electron lifetime is presented, and a novel technique for measuring a track's position based on pulse properties is described., Comment: 28 pages, 12 figures, accepted by JINST

The thumb is frequently impaired in rheumatoid arthritis. This leads to major disability in affected patients. Through a clinical case, we describe a reconstructive strategy for a three-joint adduction thumb deformity that caused instability of the interphalangeal and metacarpophalangeal joints, without cartilaginous lesion. Ulnar collateral ligament destruction was treated by a bone-ligament-bone graft at the interphalangeal joint and by a Littler ligamentoplasty at the metacarpophalangeal joint. The trapeziometacarpal lesion was treated by trapeziectomy in combination with suspension ligamentoplasty. Clinical and radiological assessments at 22 months of follow-up revealed good outcomes. This technique is a new option to include in the reconstructive treatment for thumb instability, particularly when caused by rheumatoid arthritis.

The IceCube Neutrino Observatory was constructed at the South Pole during the 2004/05 to 2010/11 austral summer seasons. IceCube transforms 1 km3 of Antarctic ice into an astrophysical particle detector composed of 86 cables (strings) of optical sensors buried deep beneath the surface. Each string required drilling a borehole ∼60 cm in diameter to a depth of 2500 m. The 5 MW Enhanced Hot Water Drill was designed and built specifically for this task, capable of producing the required boreholes at a rate of one hole per 48 hours. Hot-water drilling on this scale presented unique challenges and was rich in lessons learned, yielding a collection of notable developments and takeaways (e.g. fuel-saving measures, thermal modeling, firn drilling and closed-loop computer control). Descriptions of system functionality and of lessons learned from IceCube drilling are presented.

The AMANDA neutrino telescope has been in operation at the South Pole since 1996. The present final array configuration, operational since 2000, consists of 677 photomultiplier tubes arranged in 19 strings, buried at depths between 1500 and 2000 m in the ice. The most recent results on a multi-year search for point sources of neutrinos will be shown. The study of events triggered in coincidence with the surface array SPASE and AMANDA provided a result on cosmic ray composition. Expected improvements from IceCube/IceTop will also be discussed.

The IceCube neutrino telescope, to be constructed near the Antarctic South Pole, represents the next generation of neutrino telescope. Its large 1 km3 size will make it uniquely sensitive to the detection of neutrinos from astrophysical sources. The current design of the detector is presented. The basic performance of the detector and its ability to search for neutrinos from various astrophysical sources has been studied using detailed simulations and is discussed.

WORKS final conference report

1st ISA Forum report

The WORKS Project started two years ago (2005), involving the efforts of research institutes of 13 European countries with the main purpose of improving the understanding of the major changes in work in the knowledge-based society, taking account both of global forces and the regional diversity within Europe. This research meeting in Sofia (Bulgaria) aimed to present synthetically the massive amount of data collected in the case studies (occupational and organisational) and with the quantitative research during last year.

The clothing sector in several countries is still seen, in many aspects as a traditional sector with some average characteristics, nevertheless is a very important sector in terms of labour market. Globalization and de-localization are having a strong impact in the organisation of work and in occupational careers. Very few companies are able to keep a position in the market without changes in organisation of work and workers, founding different ways to face this reality according to size, capital and position. We could find two main paths: one where companies outsource production to another territory, close and/or dismissal the workers; other path, where companies up skilled their capacities. This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the Portuguese case studies in several clothing companies in a comparative analysis with some other European countries.

With the emergence of a global division of labour, the internationalisation of markets and cultures, the growing power of supranational organisations and the spread of new information technologies to every field of life, it starts to appear a different kind of society, different from the industrial society, and called by many as ‘the knowledge-based economy’, emphasizing the importance of information and knowledge in many areas of work and organisation of societies. Despite the common trends of evolution, these transformations do not necessarily produce a convergence of national and regional social and economic structures, but a diversity of realities emerging from the relations between economic and political context on one hand and the companies and their strategies on the other. In this sense, which future can we expect to the knowledge economy? How can we measure it and why is it important? This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the future visions and possible future trends in different countries, sectors and industries, given empirical evidences of the case studies applied in several European countries, underling the importance of foresight exercises to design policies, prevent uncontrolled risks and anticipate alternatives, leading to different ‘knowledge economies’ and not to the ‘knowledge economy’.

The clothing sector in Portugal is still seen, in many aspects as a traditional sector with some average characteristics, such as: low level of qualifications, less flexible labour legislation and stronger unionisation, very low salaries and low capability of investment in innovation and new technology. Is, nevertheless, a very important sector in terms of labour market, with increased weight in the exporting structure. Globalisation and delocalisation are having a strong impact in the organisation of work and in occupational careers in the sector. With the pressure of global competitiveness in what concerns time and prices, very few companies are able to keep a position in the market without changes in organisation of work and workers. And those that can perform good responses to such challenges are achieving a better economical stability. The companies have found different ways to face this reality according to size, capital and position. We could find two main paths: one where companies outsource a part or the entire production to another territory (for example, several manufacturing tasks), close and/or dismissal the workers. Other path, where companies up skilled their capacities investing, for example, in design, workers training, conception and introduction of new or original products. This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the Portuguese case studies in several clothing companies in what concern implications of global context for the companies in general and for the workers in particular, in a comparative analysis with some other European countries.

A ordenação social é um dos temas centrais estudados pela sociologia desde há muito tempo. As teorias de acção social e de estrutura social são duas tradições teóricas usadas para explicar a forma como o mundo social se organiza e como funciona sem necessitar de uma imposição contínua de regras e normas. O poder e a acção social são dois conceitos centrais no mundo social, com uma forte ligação e influência mútua. O poder permite ou limita a acção, dá aos actores a possibilidade de ter mais e melhores oportunidades e posições sociais. A vida social é uma negociação constante, onde o poder e a acção estão sempre presentes, e é esta relação complexa que determina a natureza das relações sociais e o comportamento de cada indivíduo. Partindo de uma exposição teórica, o relatório irá apresentar alguns exemplos relacionados com o mercado de trabalho e comportamento organizacional para realçar a interacção entre os dois conceitos e a sua importância na vida social.

Portugal had only very few foresight exercises on the automobile sector, and the most recent one was a survey held in a project on work organisation systems in the automobile industry, its recent historical paths and the special strategies of location of companies (the WorTiS project). This involved several teams with different disciplinary backgrounds and from two Portuguese universities. The provisional main results of the first round of a Delphi survey held in Portugal on the automotive sector were already published, but a further analysis was not yet done. This foresight survey was done under the WorTiS project, developed in 2004 by IET – Research Centre on Enterprise and Work Innovation (at FCT-UNL), and financed by the Portuguese Ministry of Science and Technology. Some of this experience on foresight analysis is also been transferred to other projects, namely the WORKS project on work organisation restructuring in the knowledge society that received the support from EC and still is running. The majority of experts considered having an average of less knowledge in almost all the scenario topics presented. This means that information on the automotive industry is not spread enough among academics or experts in related fields (regional scientists, innovation economists, engineers, sociologists). Some have a good knowledge but in very specialised fields. Others have expertise on foresight, or macroeconomics, or management sciences, but feel insecure on issues related with futures of automobile sector. Nevertheless, we considered specially the topics where the experts considered themselves to have some knowledge. There were no “irrelevant” topics considered as such by the expert panel. There are also no topics that are not considered a need for co-operation. The lack of technological infrastructures was not considered as a hindered factor for the accomplishment of any scenario. The experts’ panel considered no other international competence besides US, Japan or Germany in these topics. Special focus will be made in this paper on the topic 2. Public policy and automobile industries, and more specifically on the technological and/or research policies issues, where one can specify the automobile’s role in transport policies with further implications like environment, safety, energy, mobility.

The aim of this report is to highlight the importance of foresight exercises as a necessary tool to help the decision makers, allowing through projections and identification of the main trends, the identification of the key variables of the process and which ones may have more influence in the process of evolution of societies. It will be presented some examples of prospective methods and also scenarios construction. One example is the European project WORKS (Work organization restructuring in the knowledge society) that pretend to built a set of scenarios about the possible evolution of work in Europe in a short, medium and long term, stressing the key variables that may have an important role in the process and their interconnections. Another exemple is the report ‘Future skill needs in Europe’ prepared in 2008 by Cedefop, that presents data about the future development of employment by industry, occupation and qualification by 2015.

We present the results of a Monte-Carlo study of the sensitivity of the planned IceCube detector to predicted fluxes of muon neutrinos at TeV to PeV energies. A complete simulation of the detector and data analysis is used to study the detector's capability to search for muon neutrinos from sources such as active galaxies and gamma-ray bursts. We study the effective area and the angular resolution of the detector as a function of muon energy and angle of incidence. We present detailed calculations of the sensitivity of the detector to both diffuse and pointlike neutrino emissions, including an assessment of the sensitivity to neutrinos detected in coincidence with gamma-ray burst observations. After three years of datataking, IceCube will have been able to detect a point source flux of E^2*dN/dE = 7*10^-9 cm^-2s^-1GeV at a 5-sigma significance, or, in the absence of a signal, place a 90% c.l. limit at a level E^2*dN/dE = 2*10^-9 cm^-2s^-1GeV. A diffuse E-2 flux would be detectable at a minimum strength of E^2*dN/dE = 1*10^-8 cm^-2s^-1sr^-1GeV. A gamma-ray burst model following the formulation of Waxman and Bahcall would result in a 5-sigma effect after the observation of 200 bursts in coincidence with satellite observations of the gamma-rays., Comment: 33 pages, 13 figures, 6 tables

IceCube is a new high-energy neutrino telescope which will be coming online in the near future. IceCube will be capable of measuring fluxes of all three flavors of neutrino, and its peak neutrino energy sensitivity will be in the TeV–PeV range. Here, after a brief description of the detector, we describe its anticipated performance with a selection of physics topics: supernovae, extraterrestrial diffuse and point sources of neutrinos, gamma-ray bursts, neutrinos from WIMP annihilation, and cosmic ray composition.