Search

Barbari GR, Dorkoosh FA, Amini M, et al. Int J Nanomedicine. 2017;12:3471–3483 The Editor and Publisher of International Journal of Nanomedicine wish to retract the published article. Concerns were raised regarding the alleged duplication of features within the image shown in Figure 4. The first author responded to our queries but was unable to provide the original images for Figure 4. The first author explained they were responsible for the preparation of the SEM images and wishes to apologize to the readers and other authors for any errors that may have been introduced to the image which led to the retraction of the paper. However, all the authors accept responsibility for the integrity of the reported research and agree with the decision to retract the article. Our decision-making was informed by our policy on publishing ethics and integrity and the COPE guidelines on retraction. The retracted article will remain online to maintain the scholarly record, but it will be digitally watermarked on each page as “Retracted”. This retraction relates to this paper

Ghullam Reza Barbari,1 Farid Dorkoosh,1 Mohsen Amini,2 Nika Bahari Javan,1 Mohammad Sharifzadeh,3 Fateme Atyabi,1 Saeed Balalaie,4 Niyousha Rafiee Tehrani,5 Morteza Rafiee Tehrani1 1Department of Pharmaceutics, School of Pharmacy, Tehran University of Medical Sciences, Tehran, Iran; 2Department of Medicinal Chemistry, School of Pharmacy, Tehran University of Medical Sciences, Tehran, Iran; 3Department of Pharmacology, School of Pharmacy, Tehran University of Medical Sciences, Tehran, Iran; 4Department of Chemistry, Khajeh Nasir Toosi University, Tehran, Iran; 5School of Medicine, Tehran University of Medical Sciences, Tehran, Iran Background: Despite years of experience and rigorous research, injectable insulin is the sole trusted treatment method to control the blood glucose level in diabetes type 1 patients, but injection of insulin is painful and poses a lot of stress to the patients, especially children, therefore, development of a non-injectable formulation of insulin is a major breakthrough in the history of medicine and pharmaceutical sciences. Methods: In this study, a novel peptide grafted derivative of chitosan (CPP-g- chitosan) is synthesized and its potential for oral delivery of proteins and peptides is evaluated. Drug-loaded nanoparticles were developed from this derivative using ionic gelation method with application of sodium tripolyphosphate (TPP) as a cross-linking agent. Human insulin was used as the model protein drug and release kinetic was studied at gastrointestinal pH. Finally the developed nanoparticles were filled into very tiny enteric protective capsules and its effects on blood glucose level are evaluated in laboratory animals. Results: Presence of the positively charged cell-penetrating peptide moiety in the structure of chitosan polymer had slight inhibitory effects on the release of insulin from the nanoparticles in simulated gastric fluid (pH 1.2) comparing to native chitosan. The nanoparticles were positively charged in gastrointestinal pH with size ranging from 180 nm to 326 nm. The polypeptide grafted to chitosan is a novel analog of Penetratin, presenting both the hydrophilic and hydrophobic characteristics altering the release behavior of the nanoparticles and significantly increase the absorption of insulin into the rat epithelium comparing to nanoparticles from simple chitosan. In-vivo results in diabetic rat proved that this nanoparticulate system can significantly lower the blood glucose levels in diabetic rats and remain effective for a duration of 9–11 hours. Conclusion: The results indicate that nanoparticles developed from this new peptide conjugated derivative of chitosan are very promising for oral delivery of proteins and peptides. Keywords: peptide grafted, oral delivery, cell-penetrating peptide, penetratin

Ghullam Reza Barbari,1 Farid Abedin Dorkoosh,1 Mohsen Amini,2 Mohammad Sharifzadeh,3 Fateme Atyabi,1 Saeed Balalaie,4 Niyousha Rafiee Tehrani,5 Morteza Rafiee Tehrani1 1Department of Pharmaceutics, 2Department of Medicinal Chemistry, 3Department of Pharmacology, School of Pharmacy, Tehran University of Medical Sciences, 4Department of Chemistry, Khaje Nasiroddin University, 5Department of Biochemistry, School of Medicine, Tehran University of Medical Sciences, Tehran, Iran Abstract: A simple and reproducible water-in-oil (W/O) nanoemulsion technique for making ultrasmall (

Barbari GR, Dorkoosh F, Amini M, et al. Synthesis and characterization of a novel peptide-grafted Cs and evaluation of its nanoparticles for the oral delivery of insulin, in vitro, and in vivo study. Int J Nanomed. 2018;13:5127–5138.The Editor in Chief and Publisher of International Journal of Nanomedicine wish to retract the published article. The journal was notified of the potential duplication of images in Figure 4 and Figure 5 of the published article. It was observed that Figure 5 was an inverted version of Figure 4. The authors were asked for an explanation but were unable to provide a satisfactory response or provide the original raw data for the images. It was determined the first author, Ghullam Reza Barbari, was solely responsible for preparing the images, however all the authors had approved of the final article for publication.The Editor in Chief determined the results and findings of the article were no longer valid and advised a retraction was the only course of action.The authors wish to apologise for this error.Our decision-making was informed by our policy on publishing ethics and integrity and the COPE guidelines on retraction. The retracted article will remain online to maintain the scholarly record, but it will be digitally watermarked on each page as “Retracted”. This retraction relates to this paper

Background: The ability of supercritical fluids (SCFs), such as carbon dioxide, to dissolve and expand or extract organic solvents and as result lower their solvation power, makes it possible the use of SCFs for the precipitation of solids from organic solutions. The process could be the injection of a solution of the substrate in an organic solvent into a vessel which is swept by a supercritical fluid. The aim of this study was to ascertain the feasibility of supercritical processing to prepare different particulate forms of fluticasone propionate (FP), and to evaluate the influence of different liquid solvents and precipitation temperatures on the morphology, size and crystal habit of particles. Method: The solution of FP in organic solvents, was precipitated by supercritical carbon dioxide (SCCO2) at two pressure and temperature levels. Effects of process parameters on the physicochemical characteristics of harvested microparticles were evaluated. Results: Particle formation was observed only at the lower selected pressure, whilst at the higher pressure, no precipitation of particles was occurred due to dissolution of FP in supercritical antisolvent. The micrographs of the produced particles showed different morphologies for FP obtained from different conditions. The results of thermal analysis of the resulted particles showed that changes in the processing conditions didn't influence thermal behavior of the precipitated particles. Evaluation of the effect of temperature on the size distribution of particles showed that increase in the temperature from 40 °C to 50 °C, resulted in reduction of the mean particle size from about 30 µm to about 12 ?m. Conclusion: From the results of this study it may be concluded that, processing of FP by supercritical antisolvent could be an approach for production of diverse forms of the drug and drastic changes in the physical characteristics of microparticles could be achieved by changing the type of solvent and temperature of operation. [ABSTRACT FROM AUTHOR]

Chitosan, a biodegradable and biocompatible polymer, has attracted great attention in the pharmaceutical and biomedical fields especially due to its properties to reversibly open the tight junctions of the epithelial tissues and to allow for paracellular transport of hydrophilic macromolecules. However, chitosan exhibits low solubility at pH values above 6 that may prevent its enhancing effects at the sites of intestinal absorption. Hence, a number of alkylated chitosan salts have been synthesized and characterized. These derivatives have been shown to have good solubility at neutral pH and act as effective permeation enhancers. In this study, two new derivatives of chitosan, C2-C6 trimethyl 6-amino-6-deoxy chitosan and C2-C6 triethyl 6-amino-6-deoxy chitosan were synthesized and characterized using 1H-NMR and FTIR spectra. Moreover, the zeta potential and the antibacterial properties of these polymers were compared to chitosan, trimethyl chitosan (TMC) and triethyl chitosan (TEC). Our results suggest that both C2-C6 trimethyl and triethyl 6-amino- 6-deoxy chitosan, as highly water soluble polymers, have higher positive surface charge than chitosan, TMC, and TEC. Moreover, the new synthesized polymers show higher antibacterial activity against Gram-positive Staphylococcus aureus bacteria. Consequently, these polymers with substitution degrees of 50-60% may be good candidates for the enhancement of peptides in mucosal drug delivery. [ABSTRACT FROM AUTHOR]

N,N-dimethyl N-ethyl chitosan (DMEC), a quanternized derivative of chitosan was synthesized based on a modified two-stop method via a 2² factorial design to optimize the preparative conditions. The degree of deacetylation of the starting chitosan was determined by FTIR and NMR methods and was 95%. In the first step of the synthesis, mono-ethyl chitosan was prepared by introducing an ethyl group onto the amine group of chitosan via a Schiff base and in the next step methyl iodide was added to produce DMEC which was water soluble in a pH range of 4–8. The DMEC polymers with different degrees of quaternization were obtained and fully characterized using FTIR and ¹H-NMR spectroscopic methods. Based on ¹H-NMR calculations, the degree of quaternization was 52% by optimizing the two-step process. [ABSTRACT FROM AUTHOR]

Posterior eye diseases are a common cause of vision problems in developing countries, which have encouraged the development of new treatment models for these degenerative diseases. Intraocular implants are one of the drug delivery systems to the posterior region of the eye. Using these implants, the blood-eye barrier can be bypassed; the complications caused by repeated in vitro administrations can be eliminated, and smaller amounts of the drug would be used during the treatment process. Meanwhile, biodegradable implants have received more attention due to their biodegradable structure and the lack of need for re-surgery to remove the rest of the system from the eye. The aim of this study is to employ biodegradable implants composed of polyethylene glycol (PEG) and 3-hydroxybutyrate-co-3-hydroxyvalerat (PHBV) to deliver betamethasone to the back of the eye in the treatment of retinopathy. PHBV polymer has been selected as the main polymer with a certain ratio of drug to polymer for fabrication of enamel and different amounts of PEG with three molecular weights used as pore generators to control drug release over a period of time. Based on the analysis of the results of differential scanning calorimetry (DSC) and FTIR spectroscopy, none of the polymers were degraded in the temperature range of the manufacturing process, and among betamethasone derivatives, the best option for implant preparation is the use of its basic form. Drug release studies over a period of three months showed that implants containing PHBV HV2% and PEG 6000 had a more appropriate release profile.

Uncontrolled distribution of nanoparticles (NPs) within the body can significantly decrease the efficiency of drug therapy and is considered among the main restrictions of NPs application. The aim of this study was to develop a depot combination delivery system (CDS) containing fingolimod loaded poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) NPs dispersed into a matrix of oleic acid-grafted-aminated alginate (OA-g-AAlg) to minimize the nonspecific biodistribution (BD) of PHBV NPs. OA-g-AAlg was synthesized in two step; First, Alg was aminated by using adipic dihydrazide (ADH). The degree of hyrazide group substitution of Alg was determined by trinitro-benzene-sulfonic acid (TNBS) assay. Second, OA was attached to AAlg through formation of an amide bond. Chemical structure of OA-g-AAlg was confirmed with FTIR and HNMR spectroscopy. Furthermore, rheological properties of OA-g-AAlg with different grafting ratios were evaluated. In-vitro release studies indicated that 47% of fingolimod was released from the CDS within 28 days. Blood and tissue samples were analyzed using liquid chromatography/tandem mass spectrometry following subcutaneous (SC) injection of fingolimod-CDS into Wistar rats. The elimination phase half-life of CDS-fingolimod was significantly higher than that of fingolimod (∼32 d vs. ∼20 h). To investigate the therapeutic efficacy, lymphocyte count was assessed over a 40 day period in Wistar rats. Peripheral blood lymphocyte count decreased from baseline by 27 ± 8% in 2 days after injection. Overall, the designed CDS represented promising results in improving the pharmacokinetic properties of fingolimod. Therefore, we believe that this sustained release formulation has a great potential to be applied to delivery of various therapeutics.

Purpose: Hydroxyurea (HU) is a well-known chemotherapy drug with several side effects which limit its clinical application. This study was conducted to improve its therapeutic efficiency against breast cancer using liposomes as FDA-approved drug carriers. Methods: PEGylated nanoliposomes-containing HU (NL-HU) were made via a thin-film hydration method, and assessed in terms of zeta potential, size, morphology, release, stability, cellular uptake, and cytotoxicity. The particle size and zeta potential of NL-HU were specified by zeta-sizer. The drug release from liposomes was assessed by dialysis diffusion method. Cellular uptake was evaluated by flow cytometry. The cytotoxicity was designated by methyl thiazolyl diphenyl-tetrazolium bromide (MTT) test. Results: The size and zeta value of NL-HU were gotten as 85 nm and -27 mV, respectively. NL-HU were spherical.NL-HU vesicles were detected to be stable for two months. The slow drug release and Weibull kinetic model were obtained. Liposomes considerably enhanced the uptake of HU into BT-474 human breast cancer cells. The cytotoxicity of NL-HU on BT-474 cells was found to be significantly more than that of free HU. Conclusion: The results confirmed these PEGylated nanoliposomes containing drug are potentially suitable against in vitro model of breast cancer., (© 2020 The Author (s).)

Chitosan as a biopolymer is an attractive vehicle for biomedical applications due to its unique characteristics. In order to improve chitosan's physicochemical features, chemical modification has been carried out to make it more suitable for such approaches. The aim of this study was to prepare and evaluate thiolated chitosan-lauric acid as a new chitosan derivative for biomedical use. Lauric acid was introduced to chitosan via stable amide bond between carboxylic acid group of fatty acid and the amine in the chitosan and thiolation was carried out using thioglycolic acid. Resulted polymers were characterized by FTIR, 1 H NMR and TGA. Moreover, cell viability assessment of new derivative was performed using MTT method. FTIR and 1 H NMR results showed that both substitution reactions were successfully completed. Furthermore, new synthesized polymer had no significant cytotoxicity against normal gingiva human cells (HGF1-PI 1).These findings confirm that this new derivative can be introduced as a suitable polymer for biomedical purposes such as mucosal drug delivery., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The purpose of this research was the fabrication, statistical optimization, and in vitro characterization of insulin-loaded poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanoparticles (INS-PHBV-NPs). Nanopar-ticles were successfully developed by double emulsification solvent evaporation method. The NPs were characterized for particle size, entrapment efficiency (EE%), and polydispersity index (PDI). The NPs also were characterized by scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and circular dichroism (CD). The optimum conditions were found to be 1.6% polyvinyl alcohol (PVA), 0.9% of PHBV, and 15 mg/ml of insulin with the aid of the Box-Behnken experimental design results. The optimized NPs showed spherical shape with particle size of 250.21 ± 11.37 nm, PDI of 0.12 ± 0.01, and with EE% of 90.12 ± 2.10%. In vitro drug release pattern followed Korsmeyer-Peppas model and exhibited an initial burst release of 19% with extended drug release of 63.2% from optimized NPs within 27 d. In conclusion, these results suggest that INS-PHBV-NPs could be a promising candidate for designing an injectable sustained release formulation for insulin.

Choroidal neovascularization (CNV) is among the leading causes of blindness worldwide. Bevacizumab has demonstrated promising effects on CNV treatment; however, frequent intravitreal injection is its major drawback. Current study aimed to address this issue by developing a sustained release formulation through nanoparticles of bevacizumab imbedded in an ocular implant. Bevacizumab-loaded chitosan nanoparticles were prepared by ionic gelation method and inserted in the matrix of hyaluronic acid and zinc sulfate. Despite the common approaches in using ultraviolet (UV)-spectrophotometry, microprotein-Bradford, and bicinchoninic acid (BCA), assay for protein assessment, our results revealed a remarkable UV-Vis absorption overlap of protein and chitosan during these analysis and thus enzyme-linked immunosorbent assay was employed for the antibody concentration assay. The size of optimized nanoparticles obtained through statistical analysis based on design of experiments was 78.5 ± 1.9 nm with polydispersity index of 0.13 ± 0.05 and the entrapment-efficiency and loading-efficiency were 67.6 ± 6.7 and 15.7 ± 5.7%, respectively. The scanning electron microscopy and confocal microscopy images revealed a homogenous distribution of nanoparticles in the implant matrix and the release test results indicated an appropriate extended release of bevacizumab from the carrier over two months. In conclusion, the prepared system provided a sustained release bevacizumab delivery formulation which can introduce a promising ocular drug delivery system intended for posterior segment disease. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2261-2271, 2018., (Copyright © 2018 Wiley Periodicals, Inc.)

Nanostructured colloidal delivery systems comprising of pectin-coated nanoliposomes (pectonanoliposomes) were developed as carriers for a bioactive polyphenolic compound (phloridzin). Phloridzin-loaded nanoliposomes were fabricated using a heating-stirring-sonication method, and coated with low methoxyl pectin using an electrostatic deposition approach. Dynamic light scattering, micro-electrophoresis, atomic force microscopy, and UV-Visible spectroscopy were used to investigate the impact of system composition on the size, charge, morphology and stability as well as immobilization, adsorption and encapsulation efficiencies of the pectonanoliposomes. Response surface methodology was used to optimize the composition of the pectonanoliposomes based on particle size and charge characteristics. Linear, quadratic and interaction effects of 1,2-dioleoyl-3-trimethyl ammonium propane/lecithin, phloridzin/lecithin and pectin/liposome ratios significantly influenced the mean hydrodynamic diameter and/or surface charge of pectonanoliposomes. Second-order polynomial regression models were generated for intensity-weighted particle size and zeta potential of the designed carriers. Topographic and phase contrast images showed that pectonanoliposomes exhibited a range of different morphologies. Coating the nanoliposomes with pectin improved their immobilization and encapsulation efficiencies as well as physical storage stability. Cationic pectonanoliposomes were superior to plain systems regarding long-term stability. Our results suggest that pectonanoliposomes may be suitable delivery systems for polyphenolic nutraceuticals, such as phloridizin, in functional food and pharmaceutical applications., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This study aims at the mathematical optimization by Box-Behnken statistical design, fabrication by ionic gelation technique and in vitro characterization of insulin nanoparticles containing thiolated N- dimethyl ethyl chitosan (DMEC-Cys) conjugate. Then Optimized insulin nanoparticles were loaded into the buccal film, and in-vitro drug release from films was investigated, and diffusion coefficient was predicted. The optimized nanoparticles were shown to have mean particle size diameter of 148nm, zeta potential of 15.5mV, PdI of 0.26 and AE of 97.56%. Cell viability after incubation with optimized nanoparticles and films were assessed using an MTT biochemical assay. In vitro release study, FTIR and cytotoxicity also indicated that nanoparticles made of this thiolated polymer are suitable candidates for oral insulin delivery., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this study, N,N-Dimethyl-N-Octyl chitosan was synthesized. Nanoparticles containing insulin were prepared using PEC method and were statistically optimized using the Box-Behnken response surface methodology. The independent factors were considered to be the insulin concentration, concentration and pH of the polymer solution, while the dependent factors were characterized as the size, zeta potential, PdI and entrapment efficiency. The optimized nanoparticles were morphologically studied using SEM. The cytotoxicity of the nanoparticles on the Caco-2 cell culture was studied using the MTT cytotoxicity assay method, while the permeation of the insulin nanoparticles across the Caco-2 cell monolayer was also determined. The optimized nanoparticles posed appropriate physicochemical properties. The SEM morphological studies showed spherical to sub-spherical nanoparticles with no sign of aggregation. The in-vitro release study showed that 95.5 ± 1.40% of the loaded insulin was released in 400 min. The permeability studies revealed significant enhancement in the insulin permeability using nanoparticles prepared from octyl chitosan at 240 min (11.3 ± 0.78%). The obtained data revealed that insulin nanoparticles prepared from N,N-Dimethyl-N-Octyl chitosan can be considered as the good candidate for oral delivery of insulin compared to nanoparticles prepared from N,N,N-trimethyl chitosan.

Purpose: The aim of this research work was to explore the possibility of providing multifunctional oral insulin delivery system by conjugating several types of dipeptides on chitosan and trimethyl chitosan to be used as drug carriers., Method: Conjugates of Glycyl-glycine and alanyl-alanine of chitosan and trimethyl chitosan (on primary alcohol group of polymer located on carbon 6) were synthesized and nanoparticles containing insulin were prepared for oral delivery. Preparation conditions of nanoparticles were optimized and their performance to enhance the permeability of insulin as well as cytotoxicity of nanoparticles in Caco-2 cell line was evaluated. To evaluate the efficacy of orally administered nanoparticles, nanoparticles with the most permeability enhancing ability were studied in male Wistar rats as animal model by measuring insulin and glucose Serum levels., Result: Structural study of all the conjugates by infrared spectroscopy and nuclear magnetic resonance confirmed the successful formation of the conjugates with the desirable substitution degree. By optimizing preparation conditions, nanoparticles with expected size (157.3-197.7 nm), Zeta potential (24.35-34.37 mV), polydispersity index (0.365-0.512), entrapment efficiency (70.60-86.52%) and loading capacity (30.92-56.81%), proper morphology and desirable release pattern were obtained. Glycyl-glycine and alanyl-alanine conjugate nanoparticles of trimethyl chitosan showed 2.5-3.3 folds more effective insulin permeability in Caco-2 cell line than their chitosan counterparts. In animal model, oral administration of glycyl-glycine and alanyl-alanine conjugate nanoparticles of trimethyl chitosan demonstrated reasonable increase in Serum insulin level with relative bioavailability of 17.19% and 15.46% for glycyl-glycine and alanyl-alanine conjugate nanoparticles, respectively, and reduction in Serum glucose level compared with trimethyl chitosan nanoparticles (p < 0.05)., Conclusion: It seems that glycyl-glycine and alanyl-alanine conjugate nanoparticles of trimethyl chitosan have met the aim of this research work and have been able to orally deliver insulin with more than one mechanism in animal model. Hence, they are promising candidates for further research studies., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A comprehensive model with all effective phenomena in drug release such as diffusion, swelling and erosion was considered. In this work, a mathematical model was developed to describe drug release from controlled release HPMC matrices as a favorable system in pharmaceutical industries. As a novel study, the impact of the MCC presence as a filler in tablet preparation process was considered in the mathematical model. In addition, we found that the volume expansion of these polymeric matrices did not follow the ideal mixing rule and we derived an equation for estimating the volume of hydrated matrix. Furthermore, some equations were derived to estimate the parameters of model (K erosion , D eq ) as well as the change in matrix volume based on the amount of polymer and filler in formulation. This investigation gave deeper insight into underlying drug release mechanisms. According to the results, K erosion increases linearly and D eq increases exponentially with the increase in the amount of MCC in formulation. Application of this comprehensive mathematical model enables us to predict the behavior of HPMC-MCC based matrices. Furthermore, this model is able to represent the formulation for the desired drug release profile which is useful to design new controlled release matrix as well as improving the system geometry and dimensions of tablets. The presented model was validated by two independent tests: (a) predicting the behavior of matrix with certain MCC/HPMC ratio upon exposure to the release medium; (b) designing formulation of Bupropion hydrochloride extended release tablet., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Sustained release of functional growth factors can be considered as a beneficial methodology for wound healing. In this study, recombinant human granulocyte colony-stimulating factor (G-CSF)-loaded chitosan nanoparticles were incorporated in Poly(ε-caprolactone) (PCL) nanofibers, followed by surface coating with collagen type I. Physical and mechanical properties of the PCL nanofibers containing G-CSF loaded chitosan nanoparticles PCL/NP(G-CSF) and in vivo performance for wound healing were investigated. G-CSF structural stability was evaluated through SDS&#95;PAGE, reversed phase (RP) HPLC and size-exclusion chromatography, as well as circular dichroism. Nanofiber/nanoparticle composite scaffold was demonstrated to have appropriate mechanical properties as a wound dresser and a sustained release of functional G-CSF. The PCL/NP(G-CSF) scaffold showed a suitable proliferation and well-adherent morphology of stem cells. In vivo study and histopathological evaluation outcome revealed that skin regeneration was dramatically accelerated under PCL/NP(G-CSF) as compared with control groups. Superior fibroblast maturation, enhanced collagen deposition and minimum inflammatory cells were also the beneficial properties of PCL/NP(G-CSF) over the commercial dressing. The synergistic effect of extracellular matrix-mimicking nanofibrous membrane and G-CSF could develop a suitable supportive substrate in order to extensive utilization for the healing of skin wounds. © 2017 Wiley Periodicals Inc. J Biomed Mater Res Part A: 105A: 2830-2842, 2017., (© 2017 Wiley Periodicals, Inc.)

In the current study, biodegradable PHBV/PLGA blend nanoparticles (NPs) containing Teriparatide were loaded in hyaluronic acid/jeffamine (HA-JEF ED-600) hydrogel to prepare a combination delivery system (CDS) for prolonged delivery of Teriparatide. The principal purpose of the present study was to formulate an effective and prolonged Teriparatide delivery system in order to reduce the frequency of injection and thus enhance patient's compliance. Morphological properties, swelling behaviour, crosslinking efficiency and rheological characterization of HA-JEF ED-600 hydrogel were evaluated. The CDS was acquired by adding PHBV/PLGA NPs to HA-JEF ED-600 hydrogel simultaneously with crosslinking reaction. The percentage of NPs incorporation within the hydrogel as well as the loading capacity and morphology of Teriparatide loaded CDS were examined. Intrinsic fluorescence and circular dichroism spectroscopy proved that Teriparatide remains stable after processing. The release profile represented 63% Teriparatide release from CDS within 50days with lower burst release compared to NPs and hydrogel. MTT assay was conducted by using NIH3T3 cell line and no sign of reduction in cell viability was observed. Based on Miller and Tainter method, LD 50 of Teriparatide loaded CDS was 131.8mg/kg. In vivo studies demonstrated that Teriparatide loaded CDS could effectively increase serum calcium level after subcutaneous injection in mice. Favourable results in the current study introduced CDS as a promising candidate for controlled delivery of Teriparatide and pave the way for future investigations in the field of designing prolonged delivery systems for other peptides and proteins., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Chitosan is a natural mucoadhesive, biodegradable, biocompatible and nontoxic polymer which has been used in pharmaceutical industry for a lot of purposes such as dissolution enhancing, absorption enhancing, sustained releasing and protein, gene or drug delivery. Two major disadvantages of chitosan are poor solubility in physiological pH and low efficiency for protein and gene delivery. In this study thiolated methylated N-(4-N,N-dimethylaminobenzyl) chitosan was prepared for the first time in order to improve the solubility and delivery properties of chitosan. This novel chitosan derivative was characterized using 1 H NMR, Ellman test, TGA and Zetasizer. Cell toxicity studies were performed on Human Embryonic Kidney 293 (Hek293) cell line using XTT method, to investigate the potential effect of this new derivative on cell viability. 1 H NMR results showed that all substitution reactions were successfully carried out. Zeta potential of new derivative at acidic and physiological pHs was greater than chitosan and it revealed an increase in solubility of the derivative. Furthermore, it had no significant cytotoxicity against Hek293 cell line in comparison to chitosan. These findings confirm that this new derivative can be introduced as a suitable compound for biomedical purposes., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Molecularly imprinted nano-particles (MINPs) selective for olanzapine were prepared using methacrylic acid (MA) as monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linker, and 2,2-azobis (2-isobutyronitrile) (AIBN) as the initiator in 36 different ratios. The reaction runs with considerable fine powder formation were selected for further binding and selectivity studies. The MINP with the best selectivity (MINP-32) was chosen for further structural characterization by Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), adsorption-desorption isotherm for specific surface area, volume and average pore diameter determination. All characterization methods confirmed the successful formation of MINP. The optimum conditions for maximum template loading on the MINP-32 were found by experimental design using response surface methodology (RSM) and choosing absorbent amount, pH, and time as the main factors. MINPs with maximum template loading also indicated significant selectivity between template and its analog (clozapine). The release profile demonstrated a maximum release of about 95% after 288 h for MINP-32 in comparison with about 94% after 120 h for non-MINP-32. The same slow release of drug from MINP-32 was also observed during animal study of the plasma level of template, 20-28 μg/ml versus 5-10 μg/ml. The MINP-32 of this study represents a desirable ability to keep the memory of the template with significant selectivity and good capability to control the release of template in vitro and in vivo and hence could be a promising drug delivery system.