Search

The main aim of this study is to analyse the electrically conductive flow of compressible liquids by two infinitely permeable surfaces. The distance between the two surfaces is hh. Thermal relation consists of viscous dissipation. The entropy features along with magnetic force and dissipation are taken into account. The x-axis extends in the flow path along the bottom stationary plate, whereas the y-axis is orthogonal to the surfaces. The channel plates are subjected to a consistent transverse magnetic field that is implemented perpendicularly. Herein, two scenarios are investigated: the first is the Couette flow, and in the second scenario, both porous surfaces are parallel and fixed at a distance of 2h, and the motion is a Poiseuille flow controlled by pressure. The flow across the xx-axis is supposed to be generated and dependent on yy exclusively. The governed system is solved using analytical solutions. It is found that the entropy formation is higher near the cloud porous plate in comparison to the hot porous plate and the increasing values of the suction/injection parameter increase the fluid temperature. The increase in the magnetic field parameter decreases the momentum boundary layer thickness. The Brinkman number improves the thermal boundary thickness. The magnetic field parameter, suction/injection, and the Brinkman number accelerate the entropy formation in both cases.

Understanding the film lifting and draining of fluid on a vertical belt with surface tension is crucial for improving predictive models in coating and lubrication processes. This paper presents a theoretical study on the film lifting and drainage of a third-grade fluid with surface tension. The driving mechanisms on a vertical belt are the belt's upward movement, the gradient of surface tension, and gravity. The formulated nonlinear ordinary differential equation (ODE) is solved for a series-form solution using the Adomian decomposition method. Numerical computations are used to determine the stationary point placements and the thickness of the uniform film. The study elucidated that lift velocity shows a decreasing trend, while drainage velocity exhibits an increasing trend with increasing values of inverse capillary number C and Stokes number S t . The lift velocity shows an increase, whereas the drainage velocity demonstrates a decrease with an increase in the Deborah number De. With increasing values of S t and C, the stationary points shift away from the fluid–air interface, while an increase in De causes them to move towards the interface. Surface tension plays a role in supporting drainage and leads to a shift in the stationary points towards the belt. Newtonian and third-grade fluids are also compared in terms of velocity, stationary points, uniform film, and surface tension, providing insight into their behavior. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the analysis of Oldroyd 8-constant fluid flow with nanoparticle suspension via a porous media during the coating of wire is carried out. A constant magnetic field and electrically conducting fluid are considered. The governing equations thus obtained for the present model are converted to nonlinear differential equations using variables in dimensionless form. These equations are analytically solved. The influence of some parameters, like magnetic field parameter, porosity parameter, dilatant constant, pseudo-plastic constant and Brinkman number on velocity and temperature distributions are discussed graphically. For fluctuating viscosity, two models, Reynold's and Vogel's are considered. It is observed that the magnetic parameter and the Brinkman number increase, both temperature and velocity profiles show a retarding effect in both Reynold's and Vogel's models. [ABSTRACT FROM AUTHOR]

The underlying intension of this study is to oversee the flow and thermal management of hybrid nanofluid (Magnesium oxide+ Zirconium oxide+ polyethylene glycol) within a conical gap among a cone and a disk. Forced convection is examined for two situations (a) rotating disk and the stationary cone; (b) stationary disk and the rotating cone. The dimensionless differential system for the proposed model is numerically simulated with a shooting procedure (RK 4th order). Outcomes are explained through graph and tables. The main outcomes of this study are found to be – Rotating disk and stationary cone show higher temperature field for increasing estimations of the radiation parameter ( $ Rd $ R d) and the magnetic parameter ( $ M $ M) near the boundary. Hence, for heat enhancement, one can use the disk – cone model. Furthermore, increases in $ M,Rd,{\phi _1},{\phi _2} $ M , R d , ϕ 1 , ϕ 2 and $ n $ n shows an increment in Nusselt number at the cone surface $ ({N{u_c}}) $ (N u c ) compared to that at the disk surface $ ({N{u_d}}) $ (N u d ). The desired cooling in the disk and cone device could be attained by keeping the cone fixed and the disk rotating and by maintaining the surface temperature constant. It is perceived that improvement in the volume fraction of $ MgO $ M g O and $ \,Zr{O_2} $ Z r O 2 nanoparticles significantly enhanced velocity of base fluid and heat transfer rate. [ABSTRACT FROM AUTHOR]

This attempt demonstrates the nature of mass and heat transportation in non-Newtonian Reiner–Philippoff liquid flow over moving surface by considering zero and nonzero normal mass flux conditions and transverse magnetic field. Thermophoresis and Brownian movement is accounted due to the Buongiorno model of nanofluid. The expressions of flow are reframed through appropriate variables into pairs of self-similar expressions. Further, these self-similar expressions are executed numerically through the Shooting procedure (Runge–Kutta 4th order). Numerical benchmarks and graphical illustrations are prepared to visualize the role of influential constraints on interesting quantities. It is observed that Lorentz force is beneficial in obtaining effective velocity and heat transfer. Improvement in thermophoresis factor enriches temperature field in case of active control while reverse nature is observed in passive control situation. [ABSTRACT FROM AUTHOR]

The wire coating method is an engineering development to cover a wire for wadding, motorized forte and ecological protection. In wire coating analysis, moreover, the polymer extruded on the wire is hauled into interior of a die occupied with melted polymer. By considering this significance, the magneto-hydrodynamic flow and heat transmission of Oldroyd-8 constant fluid with suspension of nanoparticles in the wire coating development had been investigated. The fluid with fixed viscosity is considered in porous medium. The flow is conducted with uniform magnetic field. The arising physical governing system is modelled mathematically. The mathematical model is executed by incorporation of thermal radiation and nanoparticles (Embedded in water + hematite nanoparticles). The wire coating is scrutinized mathematically with four cases ((Ω = 0. 5 , ∅ = 0) , Ω = 0. 5 , ∅ = 0. 0 5 , Ω = − 0. 5 , ∅ = 0 , Ω = − 0. 5 , ∅ = 0. 0 5) with constant viscosity and also included in the Reynolds model for constant viscosity. The subsequent flow and heat transmission system were elucidated via the Runge–Kutta technique and the possessions of appropriate governing factors are presented in graphically. The outcome of the current investigation was equated with the previous available outcomes as a specific situation. The results were executed with nanofluid and without nanofluid as well as with positive and negative pressure gradients (Ω = 0. 5 , ∅ = 0) , Ω = 0. 5 , ∅ = 0. 0 5 , Ω = − 0. 5 , ∅ = 0 , Ω = − 0. 5 , ∅ = 0. 0. It is seen that the temperature circulation is augmented due to the upsurge in magnetic parameter M. It is interesting to note that the positive pressure gradient with nanofluid has less momentum distribution compared to rest of the cases. It is also noted that the with negative pressure gradient, the distribution is more compared to positive pressure gradient case. [ABSTRACT FROM AUTHOR]

In this study, the effects of suction and buoyancy are used to analyze the Ternary hybrid nanofluid flow on a stretching sheet through a porous media. Ternary hybrid nanofluid is (Carbon nanotubes) CNT + Graphene + Al 2 O 3 with base fluid as Water. Case-1 Buoyancy Assisting flow and Case-2 Buoyancy Opposing flow. Hybrid nanofluids have been used to speed up the heat transfer process. Nonlinear partial differential equations (PDEs) have been converted to ordinary differential equations (ODEs) using Lie group transformations. The ODE45, an algorithmic approach, has been using the aid of this built-in solver, and the resulting Ordinary differential equations were resolved. The general relationship between temperature, velocity, heat transfer rate, and shear stress on a stretchy surface is shown for a range of values of the significant factors. The temperature profiles have been rising with the impact of Da , f w . Using streamlines to examine the flow pattern of a fluid and a method of machine learning, in terms of modern language, an artificial neural network (ANN) made up of artificial neurons or nodes is known as a neural network. A neural network is a network or circuit of genetic neurons. [ABSTRACT FROM AUTHOR]

The utilization of a ternary hybrid nanofluid, a recent development in the realm of nanofluids, can result in improved heat transfer. In the ongoing study, a ternary hybrid nanofluid flow is utilized, and it is carried out atop a porous spinning disc, which is exposed to a magnetic field, heat generation, thermal radiation, and Casson fluid. In this study, Blood/Water are taken as base fluids and (Ag–Au–Al2O3) are considered as a ternary hybrid nanoparticle. Nanoparticles made of gold and silver are put to use in a vast number of industries and fields, including nanotechnology and medicine. As a result of surface effects and quantum effects, these precious metals exhibit unique features in nanoform that play a vital role in with optical, magnetic, chemical, and mechanical behavior. Al2O3 unique optical, physical and biochemical qualities make it worthwhile for numerous uses, including nanophotonic, catalysis and the fabrication of high-energy composites. A set of relevant similarity transformations is used to generate non-dimensional forms of controlling paired nonlinear Partial Differential Equations (PDEs). MATLAB is used to perform a numerical solution with ODE45. In addition, the velocity outline decreases, and the temperature profile increases slightly before decreasing over a revolving disk when the values of magnetic parameters are increased. The distribution and radiant heat components heat up as the level gets higher. Aim and objectives of the study: The aim of this study is to analyze the Comprehensive Scrutinization of Ternary hybrid and Casson flow in a conducting porous rotating disk with internal heating. The primary objective of this analysis is to increase awareness of the impending energy crisis among those working in the industrial and technological sectors. Ternary nanoparticles (NPs) have a wide range of applications, which lends credence to the developed model. For example, Al2O3 can be used in a variety of ways that benefit society, it is used in water purification to remove water from the gas streams and extend people's lives. [ABSTRACT FROM AUTHOR]

Passive systems that need exceptional apparent geometries, thermal packaging, or fluid additives. In passive procedures, a number of foremost efforts have been conducted. The passive methods are divided into two groups: geometry modification (e.g. nano/microchannels) and solid additives (e.g. micro/nano solid particles). In a recent development in microfabrication – the development of fabrication of minuscule buildings of micrometer measures – a variation of microstrategies including heat transfer have been industrialized. Viewing this, the heat and mass transfer characteristics of a free convective Casson fluid over an elastic stretching surface are numerically studied. Thermal radiation and non-Fourier flux are incorporated in the energy to balance the transformation. Similarity transformations are used to translate partial differential equations relating to momentum, diffusion, and energy into nonlinear ordinary differential equations. The shooting approach is used to achieve numerical solutions to these equations. The effect of various physical pertinent parameters including thermal radiation parameter, Brownian motion, thermophoresis, suction, curie parameter, thermal and diffusion buoyancy forces, thermal relaxation, stretching, or shrinking parameters on the concentration and temperature profiles is investigated. It is observed that the nonlinear case has highly mixed performance when compared to the linear case of temperature and concentration fields. [ABSTRACT FROM AUTHOR]

In this paper, the importance of mass and heat transfer characteristics of mixed convective conditions on nonlinear free convection flow embedded with non-Fourier flux and thermal radiation is numerically investigated. A partial Casson slip and mixed impact of thermophoresis and Brownian motion is considered at the elastic surface. To change the highly nonlinear partial differential equations into ordinary differential system, we used the similarity transformations and then the shooting method is employed to solve resulting equations. The significance of various physical parameters on the velocity, concentration and temperature profiles are investigated for both negative value of ferromagnetic interaction ( β 1 = − 0. 2) and positive value of ferromagnetic interaction ( β 1 = 0. 2). The governing physical aspects of coefficient of skin friction, the Sherwood and Nusselt numbers are obtained for various embedded parameters. Our findings concluded that the ferromagnetic interaction is positive and then more mass transfer rate is identified compared to the negative value of ferromagnetic interaction, but whereas in friction and heat transfer rate, it was completely mixed sense (i.e., different effects have different results). Brownian motion has less Nusselt number values in positive ferromagnetism compared to negative ferromagnetism and quite opposite behavior is observed in the presence of thermophoresis, this happened due to nonlinear flux and buoyancy. [ABSTRACT FROM AUTHOR]

Analyzed in this paper is an investigation of the impacts of the varying source of heat or thermal sink and viscous dissipation on Casson fluid flow from a moving wedge by considering thermal and momentum slips in a mathematical model. Regarding the regulation of concentration fields, we incorporated the Soret and Dufour phenomena. The outcomes are analyzed numerically by using the shooting technique. The governing parametric effects of the flow characteristics are revealed graphically. We also presented the local Sherwood and Nusselt number values for non-Newtonian fluid (Casson fluid) and Newtonian. It is discovered that the thermal and concentration boundary layer is more extensive in Casson fluid while equated with the Newtonian fluid. The thermal and mass transmission in Newtonian fluid is significantly larger than in non-Newtonian fluid. The heat source/sink, Eckert number and Dufour number boost the rate of thermal transport and depreciate the rate of mass transport for both the Newtonian and non-Newtonian fluid cases. [ABSTRACT FROM AUTHOR]

The use of heat transfers in heat exchangers, nuclear cooling, solar collectors, and electrical devices is crucial nowadays. Hybrid nanofluid can be used in these applications to get the best results because it encourages efficient heat transmission compared to conventional fluid. The effect of radiation and an unsteady Carreau hybrid fluid in addition to non-Fourier heat flux over a shrinking sheet is discussed in this paper. Using similarity transformations, the newly developed system of partial differential equations (PDEs) is converted into a set of ordinary differential equations (ODEs), that are next numerically addressed by utilizing shooting approach and the Runge–Kutta (RK) method. Tables and graphs are used to present utilizing the computational findings for nondimensional temperature, velocity, heat transfer rate, and friction between fluid and hybrid nanoparticles. Additionally, for certain physical factors, the physical quantities in numerical values were also presented (such as the friction factor and local Nusselt number). We made a restricted case comparison between the current findings and the body of prior research. Our finding confirms that the temperature profile is strengthened by the heat generation parameter and the effect of radiation. The porosity parameter decelerates the momentum boundary layer thickness near the plate. [ABSTRACT FROM AUTHOR]